| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Samsung's S3C6410 based Mini6410 board device tree source |
| 4 |
* |
| 5 |
* Copyright (c) 2013 Tomasz Figa <[email protected]> |
| 6 |
* |
| 7 |
* Device tree source file for FriendlyARM Mini6410 board which is based on |
| 8 |
* Samsung's S3C6410 SoC. |
| 9 |
*/ |
| 10 |
|
| 11 |
/dts-v1/; |
| 12 |
|
| 13 |
#include <dt-bindings/gpio/gpio.h> |
| 14 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 15 |
|
| 16 |
#include "s3c6410.dtsi" |
| 17 |
|
| 18 |
/ { |
| 19 |
model = "FriendlyARM Mini6410 board based on S3C6410"; |
| 20 |
compatible = "friendlyarm,mini6410", "samsung,s3c6410"; |
| 21 |
|
| 22 |
memory@50000000 { |
| 23 |
device_type = "memory"; |
| 24 |
reg = <0x50000000 0x10000000>; |
| 25 |
}; |
| 26 |
|
| 27 |
chosen { |
| 28 |
bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1"; |
| 29 |
}; |
| 30 |
|
| 31 |
fin_pll: oscillator-0 { |
| 32 |
compatible = "fixed-clock"; |
| 33 |
clock-frequency = <12000000>; |
| 34 |
clock-output-names = "fin_pll"; |
| 35 |
#clock-cells = <0>; |
| 36 |
}; |
| 37 |
|
| 38 |
xusbxti: oscillator-1 { |
| 39 |
compatible = "fixed-clock"; |
| 40 |
clock-output-names = "xusbxti"; |
| 41 |
clock-frequency = <48000000>; |
| 42 |
#clock-cells = <0>; |
| 43 |
}; |
| 44 |
|
| 45 |
srom-cs1-bus@18000000 { |
| 46 |
compatible = "simple-bus"; |
| 47 |
#address-cells = <1>; |
| 48 |
#size-cells = <1>; |
| 49 |
reg = <0x18000000 0x8000000>; |
| 50 |
ranges; |
| 51 |
|
| 52 |
ethernet@18000000 { |
| 53 |
compatible = "davicom,dm9000"; |
| 54 |
reg = <0x18000000 0x2>, <0x18000004 0x2>; |
| 55 |
interrupt-parent = <&gpn>; |
| 56 |
interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; |
| 57 |
davicom,no-eeprom; |
| 58 |
}; |
| 59 |
}; |
| 60 |
|
| 61 |
gpio-keys { |
| 62 |
compatible = "gpio-keys"; |
| 63 |
pinctrl-names = "default"; |
| 64 |
pinctrl-0 = <&gpio_keys>; |
| 65 |
autorepeat; |
| 66 |
|
| 67 |
button-k1 { |
| 68 |
label = "K1"; |
| 69 |
gpios = <&gpn 0 GPIO_ACTIVE_LOW>; |
| 70 |
linux,code = <2>; |
| 71 |
debounce-interval = <20>; |
| 72 |
}; |
| 73 |
|
| 74 |
button-k2 { |
| 75 |
label = "K2"; |
| 76 |
gpios = <&gpn 1 GPIO_ACTIVE_LOW>; |
| 77 |
linux,code = <3>; |
| 78 |
debounce-interval = <20>; |
| 79 |
}; |
| 80 |
|
| 81 |
button-k3 { |
| 82 |
label = "K3"; |
| 83 |
gpios = <&gpn 2 GPIO_ACTIVE_LOW>; |
| 84 |
linux,code = <4>; |
| 85 |
debounce-interval = <20>; |
| 86 |
}; |
| 87 |
|
| 88 |
button-k4 { |
| 89 |
label = "K4"; |
| 90 |
gpios = <&gpn 3 GPIO_ACTIVE_LOW>; |
| 91 |
linux,code = <5>; |
| 92 |
debounce-interval = <20>; |
| 93 |
}; |
| 94 |
|
| 95 |
button-k5 { |
| 96 |
label = "K5"; |
| 97 |
gpios = <&gpn 4 GPIO_ACTIVE_LOW>; |
| 98 |
linux,code = <6>; |
| 99 |
debounce-interval = <20>; |
| 100 |
}; |
| 101 |
|
| 102 |
button-k6 { |
| 103 |
label = "K6"; |
| 104 |
gpios = <&gpn 5 GPIO_ACTIVE_LOW>; |
| 105 |
linux,code = <7>; |
| 106 |
debounce-interval = <20>; |
| 107 |
}; |
| 108 |
|
| 109 |
button-k7 { |
| 110 |
label = "K7"; |
| 111 |
gpios = <&gpl 11 GPIO_ACTIVE_LOW>; |
| 112 |
linux,code = <8>; |
| 113 |
debounce-interval = <20>; |
| 114 |
}; |
| 115 |
|
| 116 |
button-k8 { |
| 117 |
label = "K8"; |
| 118 |
gpios = <&gpl 12 GPIO_ACTIVE_LOW>; |
| 119 |
linux,code = <9>; |
| 120 |
debounce-interval = <20>; |
| 121 |
}; |
| 122 |
}; |
| 123 |
|
| 124 |
leds { |
| 125 |
compatible = "gpio-leds"; |
| 126 |
pinctrl-names = "default"; |
| 127 |
pinctrl-0 = <&gpio_leds>; |
| 128 |
|
| 129 |
led-1 { |
| 130 |
label = "LED1"; |
| 131 |
gpios = <&gpk 4 GPIO_ACTIVE_LOW>; |
| 132 |
linux,default-trigger = "heartbeat"; |
| 133 |
}; |
| 134 |
|
| 135 |
led-2 { |
| 136 |
label = "LED2"; |
| 137 |
gpios = <&gpk 5 GPIO_ACTIVE_LOW>; |
| 138 |
linux,default-trigger = "mmc0"; |
| 139 |
}; |
| 140 |
|
| 141 |
led-3 { |
| 142 |
label = "LED3"; |
| 143 |
gpios = <&gpk 6 GPIO_ACTIVE_LOW>; |
| 144 |
}; |
| 145 |
|
| 146 |
led-4 { |
| 147 |
label = "LED4"; |
| 148 |
gpios = <&gpk 7 GPIO_ACTIVE_LOW>; |
| 149 |
}; |
| 150 |
}; |
| 151 |
|
| 152 |
buzzer { |
| 153 |
compatible = "pwm-beeper"; |
| 154 |
pwms = <&pwm 0 1000000 0>; |
| 155 |
pinctrl-names = "default"; |
| 156 |
pinctrl-0 = <&pwm0_out>; |
| 157 |
}; |
| 158 |
}; |
| 159 |
|
| 160 |
&clocks { |
| 161 |
clocks = <&fin_pll>; |
| 162 |
}; |
| 163 |
|
| 164 |
&sdhci0 { |
| 165 |
pinctrl-names = "default"; |
| 166 |
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; |
| 167 |
bus-width = <4>; |
| 168 |
status = "okay"; |
| 169 |
}; |
| 170 |
|
| 171 |
&uart0 { |
| 172 |
pinctrl-names = "default"; |
| 173 |
pinctrl-0 = <&uart0_data>; |
| 174 |
status = "okay"; |
| 175 |
}; |
| 176 |
|
| 177 |
&uart1 { |
| 178 |
pinctrl-names = "default"; |
| 179 |
pinctrl-0 = <&uart1_data>, <&uart1_fctl>; |
| 180 |
status = "okay"; |
| 181 |
}; |
| 182 |
|
| 183 |
&uart2 { |
| 184 |
pinctrl-names = "default"; |
| 185 |
pinctrl-0 = <&uart2_data>; |
| 186 |
status = "okay"; |
| 187 |
}; |
| 188 |
|
| 189 |
&uart3 { |
| 190 |
pinctrl-names = "default"; |
| 191 |
pinctrl-0 = <&uart3_data>; |
| 192 |
status = "okay"; |
| 193 |
}; |
| 194 |
|
| 195 |
&pinctrl0 { |
| 196 |
gpio_leds: gpio-leds-pins { |
| 197 |
samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7"; |
| 198 |
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; |
| 199 |
}; |
| 200 |
|
| 201 |
gpio_keys: gpio-keys-pins { |
| 202 |
samsung,pins = "gpn-0", "gpn-1", "gpn-2", "gpn-3", |
| 203 |
"gpn-4", "gpn-5", "gpl-11", "gpl-12"; |
| 204 |
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; |
| 205 |
}; |
| 206 |
}; |
| 207 |
|
| 208 |
&i2c0 { |
| 209 |
pinctrl-names = "default"; |
| 210 |
pinctrl-0 = <&i2c0_bus>; |
| 211 |
status = "okay"; |
| 212 |
|
| 213 |
eeprom@50 { |
| 214 |
compatible = "atmel,24c08"; |
| 215 |
reg = <0x50>; |
| 216 |
pagesize = <16>; |
| 217 |
}; |
| 218 |
}; |