| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* Driver for Analog Devices (Linear Technology) |
| 4 |
* LTC4162-L 35V/3.2A Multi-Cell Lithium-Ion Step-Down Battery Charger |
| 5 |
* LTC4162-F 35V/3.2A Multi-Cell LiFePO4 Step-Down Battery Charger |
| 6 |
* LTC4162-S 35V/3.2A Lead-Acid Step-Down Battery Charger |
| 7 |
* LTC4015 35V/3.2A Multichemistry Buck Battery Charger Controller |
| 8 |
* Copyright (C) 2020, Topic Embedded Products |
| 9 |
*/ |
| 10 |
|
| 11 |
#include <linux/bitfield.h> |
| 12 |
#include <linux/module.h> |
| 13 |
#include <linux/delay.h> |
| 14 |
#include <linux/of.h> |
| 15 |
#include <linux/pm_runtime.h> |
| 16 |
#include <linux/power_supply.h> |
| 17 |
#include <linux/i2c.h> |
| 18 |
#include <linux/regmap.h> |
| 19 |
|
| 20 |
/* Registers (names based on what datasheet uses) */ |
| 21 |
#define LTC4162L_EN_LIMIT_ALERTS_REG 0x0D |
| 22 |
#define LTC4162L_EN_CHARGER_STATE_ALERTS_REG 0x0E |
| 23 |
#define LTC4162L_EN_CHARGE_STATUS_ALERTS_REG 0x0F |
| 24 |
#define LTC4162L_CONFIG_BITS_REG 0x14 |
| 25 |
#define LTC4162L_IIN_LIMIT_TARGET 0x15 |
| 26 |
#define LTC4162L_ARM_SHIP_MODE 0x19 |
| 27 |
#define LTC4162L_CHARGE_CURRENT_SETTING 0X1A |
| 28 |
#define LTC4162L_VCHARGE_SETTING 0X1B |
| 29 |
#define LTC4162L_C_OVER_X_THRESHOLD 0x1C |
| 30 |
#define LTC4162L_MAX_CV_TIME 0X1D |
| 31 |
#define LTC4162L_MAX_CHARGE_TIME 0X1E |
| 32 |
#define LTC4162L_CHARGER_CONFIG_BITS 0x29 |
| 33 |
#define LTC4162L_CHARGER_STATE 0x34 |
| 34 |
#define LTC4162L_CHARGE_STATUS 0x35 |
| 35 |
#define LTC4162L_LIMIT_ALERTS_REG 0x36 |
| 36 |
#define LTC4162L_CHARGER_STATE_ALERTS_REG 0x37 |
| 37 |
#define LTC4162L_CHARGE_STATUS_ALERTS_REG 0x38 |
| 38 |
#define LTC4162L_SYSTEM_STATUS_REG 0x39 |
| 39 |
#define LTC4162L_VBAT 0x3A |
| 40 |
#define LTC4162L_VIN 0x3B |
| 41 |
#define LTC4162L_VOUT 0x3C |
| 42 |
#define LTC4162L_IBAT 0x3D |
| 43 |
#define LTC4162L_IIN 0x3E |
| 44 |
#define LTC4162L_DIE_TEMPERATURE 0x3F |
| 45 |
#define LTC4162L_THERMISTOR_VOLTAGE 0x40 |
| 46 |
#define LTC4162L_BSR 0x41 |
| 47 |
#define LTC4162L_JEITA_REGION 0x42 |
| 48 |
#define LTC4162L_CHEM_CELLS_REG 0x43 |
| 49 |
#define LTC4162L_ICHARGE_DAC 0x44 |
| 50 |
#define LTC4162L_VCHARGE_DAC 0x45 |
| 51 |
#define LTC4162L_IIN_LIMIT_DAC 0x46 |
| 52 |
#define LTC4162L_VBAT_FILT 0x47 |
| 53 |
#define LTC4162L_INPUT_UNDERVOLTAGE_DAC 0x4B |
| 54 |
|
| 55 |
#define LTC4162L_CHEM_MASK GENMASK(11, 8) |
| 56 |
|
| 57 |
enum ltc4162_chem { |
| 58 |
ltc4162_lad, |
| 59 |
ltc4162_l42, |
| 60 |
ltc4162_l41, |
| 61 |
ltc4162_l40, |
| 62 |
ltc4162_fad, |
| 63 |
ltc4162_ffs, |
| 64 |
ltc4162_fst, |
| 65 |
ltc4162_sst = 8, |
| 66 |
ltc4162_sad, |
| 67 |
}; |
| 68 |
|
| 69 |
/* Enumeration as in datasheet. Individual bits are mutually exclusive. */ |
| 70 |
enum ltc4162l_state { |
| 71 |
battery_detection = 2048, |
| 72 |
charger_suspended = 256, |
| 73 |
precharge = 128, /* trickle on low bat voltage */ |
| 74 |
cc_cv_charge = 64, /* normal charge */ |
| 75 |
ntc_pause = 32, |
| 76 |
timer_term = 16, |
| 77 |
c_over_x_term = 8, /* battery is full */ |
| 78 |
max_charge_time_fault = 4, |
| 79 |
bat_missing_fault = 2, |
| 80 |
bat_short_fault = 1 |
| 81 |
}; |
| 82 |
|
| 83 |
/* Individual bits are mutually exclusive. Only active in charging states.*/ |
| 84 |
enum ltc4162l_charge_status { |
| 85 |
ilim_reg_active = 32, |
| 86 |
thermal_reg_active = 16, |
| 87 |
vin_uvcl_active = 8, |
| 88 |
iin_limit_active = 4, |
| 89 |
constant_current = 2, |
| 90 |
constant_voltage = 1, |
| 91 |
charger_off = 0 |
| 92 |
}; |
| 93 |
|
| 94 |
/* Magic number to write to ARM_SHIP_MODE register */ |
| 95 |
#define LTC4162L_ARM_SHIP_MODE_MAGIC 21325 |
| 96 |
|
| 97 |
struct ltc4162l_info; |
| 98 |
|
| 99 |
struct ltc4162l_chip_info { |
| 100 |
const char *name; |
| 101 |
int (*get_vbat)(struct ltc4162l_info *info, unsigned int reg, |
| 102 |
union power_supply_propval *val); |
| 103 |
int (*get_vcharge)(struct ltc4162l_info *info, unsigned int reg, |
| 104 |
union power_supply_propval *val); |
| 105 |
int (*set_vcharge)(struct ltc4162l_info *info, unsigned int reg, |
| 106 |
unsigned int value); |
| 107 |
int (*get_die_temp)(struct ltc4162l_info *info, |
| 108 |
union power_supply_propval *val); |
| 109 |
unsigned int ibat_resolution_pv; |
| 110 |
unsigned int vin_resolution_uv; |
| 111 |
u8 telemetry_mask; |
| 112 |
}; |
| 113 |
|
| 114 |
struct ltc4162l_info { |
| 115 |
struct i2c_client *client; |
| 116 |
struct regmap *regmap; |
| 117 |
struct power_supply *charger; |
| 118 |
const struct ltc4162l_chip_info *chip_info; |
| 119 |
u32 rsnsb; /* Series resistor that sets charge current, microOhm */ |
| 120 |
u32 rsnsi; /* Series resistor to measure input current, microOhm */ |
| 121 |
u8 cell_count; /* Number of connected cells, 0 while unknown */ |
| 122 |
}; |
| 123 |
|
| 124 |
static u8 ltc4162l_get_cell_count(struct ltc4162l_info *info) |
| 125 |
{ |
| 126 |
int ret; |
| 127 |
unsigned int val; |
| 128 |
|
| 129 |
/* Once read successfully */ |
| 130 |
if (info->cell_count) |
| 131 |
return info->cell_count; |
| 132 |
|
| 133 |
ret = regmap_read(info->regmap, LTC4162L_CHEM_CELLS_REG, &val); |
| 134 |
if (ret) |
| 135 |
return 0; |
| 136 |
|
| 137 |
/* Lower 4 bits is the cell count, or 0 if the chip doesn't know yet */ |
| 138 |
val &= 0x0f; |
| 139 |
if (!val) |
| 140 |
return 0; |
| 141 |
|
| 142 |
/* Once determined, keep the value */ |
| 143 |
info->cell_count = val; |
| 144 |
|
| 145 |
return val; |
| 146 |
}; |
| 147 |
|
| 148 |
static u8 ltc4162l_get_chem_type(struct ltc4162l_info *info) |
| 149 |
{ |
| 150 |
int ret; |
| 151 |
unsigned int val; |
| 152 |
|
| 153 |
ret = regmap_read(info->regmap, LTC4162L_CHEM_CELLS_REG, &val); |
| 154 |
if (ret) |
| 155 |
return ret; |
| 156 |
|
| 157 |
return FIELD_GET(LTC4162L_CHEM_MASK, val); |
| 158 |
}; |
| 159 |
|
| 160 |
/* Convert enum value to POWER_SUPPLY_STATUS value */ |
| 161 |
static int ltc4162l_state_decode(enum ltc4162l_state value) |
| 162 |
{ |
| 163 |
switch (value) { |
| 164 |
case precharge: |
| 165 |
case cc_cv_charge: |
| 166 |
return POWER_SUPPLY_STATUS_CHARGING; |
| 167 |
case c_over_x_term: |
| 168 |
return POWER_SUPPLY_STATUS_FULL; |
| 169 |
case bat_missing_fault: |
| 170 |
case bat_short_fault: |
| 171 |
return POWER_SUPPLY_STATUS_UNKNOWN; |
| 172 |
default: |
| 173 |
return POWER_SUPPLY_STATUS_NOT_CHARGING; |
| 174 |
} |
| 175 |
}; |
| 176 |
|
| 177 |
static int ltc4162l_get_status(struct ltc4162l_info *info, |
| 178 |
union power_supply_propval *val) |
| 179 |
{ |
| 180 |
unsigned int regval; |
| 181 |
int ret; |
| 182 |
|
| 183 |
ret = regmap_read(info->regmap, LTC4162L_CHARGER_STATE, ®val); |
| 184 |
if (ret) { |
| 185 |
dev_err(&info->client->dev, "Failed to read CHARGER_STATE\n"); |
| 186 |
return ret; |
| 187 |
} |
| 188 |
|
| 189 |
val->intval = ltc4162l_state_decode(regval); |
| 190 |
|
| 191 |
return 0; |
| 192 |
} |
| 193 |
|
| 194 |
static int ltc4162l_charge_status_decode(enum ltc4162l_charge_status value) |
| 195 |
{ |
| 196 |
if (!value) |
| 197 |
return POWER_SUPPLY_CHARGE_TYPE_NONE; |
| 198 |
|
| 199 |
/* constant voltage/current and input_current limit are "fast" modes */ |
| 200 |
if (value <= iin_limit_active) |
| 201 |
return POWER_SUPPLY_CHARGE_TYPE_FAST; |
| 202 |
|
| 203 |
/* Anything that's not fast we'll return as trickle */ |
| 204 |
return POWER_SUPPLY_CHARGE_TYPE_TRICKLE; |
| 205 |
} |
| 206 |
|
| 207 |
static int ltc4162l_get_charge_type(struct ltc4162l_info *info, |
| 208 |
union power_supply_propval *val) |
| 209 |
{ |
| 210 |
unsigned int regval; |
| 211 |
int ret; |
| 212 |
|
| 213 |
ret = regmap_read(info->regmap, LTC4162L_CHARGE_STATUS, ®val); |
| 214 |
if (ret) |
| 215 |
return ret; |
| 216 |
|
| 217 |
val->intval = ltc4162l_charge_status_decode(regval); |
| 218 |
|
| 219 |
return 0; |
| 220 |
} |
| 221 |
|
| 222 |
static int ltc4162l_state_to_health(enum ltc4162l_state value) |
| 223 |
{ |
| 224 |
switch (value) { |
| 225 |
case ntc_pause: |
| 226 |
return POWER_SUPPLY_HEALTH_OVERHEAT; |
| 227 |
case timer_term: |
| 228 |
return POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE; |
| 229 |
case max_charge_time_fault: |
| 230 |
return POWER_SUPPLY_HEALTH_WATCHDOG_TIMER_EXPIRE; |
| 231 |
case bat_missing_fault: |
| 232 |
return POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; |
| 233 |
case bat_short_fault: |
| 234 |
return POWER_SUPPLY_HEALTH_DEAD; |
| 235 |
default: |
| 236 |
return POWER_SUPPLY_HEALTH_GOOD; |
| 237 |
} |
| 238 |
} |
| 239 |
|
| 240 |
static int ltc4162l_get_health(struct ltc4162l_info *info, |
| 241 |
union power_supply_propval *val) |
| 242 |
{ |
| 243 |
unsigned int regval; |
| 244 |
int ret; |
| 245 |
|
| 246 |
ret = regmap_read(info->regmap, LTC4162L_CHARGER_STATE, ®val); |
| 247 |
if (ret) |
| 248 |
return ret; |
| 249 |
|
| 250 |
val->intval = ltc4162l_state_to_health(regval); |
| 251 |
|
| 252 |
return 0; |
| 253 |
} |
| 254 |
|
| 255 |
static int ltc4162l_get_online(struct ltc4162l_info *info, |
| 256 |
union power_supply_propval *val) |
| 257 |
{ |
| 258 |
unsigned int regval; |
| 259 |
int ret; |
| 260 |
|
| 261 |
ret = regmap_read(info->regmap, LTC4162L_SYSTEM_STATUS_REG, ®val); |
| 262 |
if (ret) |
| 263 |
return ret; |
| 264 |
|
| 265 |
/* BIT(2) indicates if input voltage is sufficient to charge */ |
| 266 |
val->intval = !!(regval & BIT(2)); |
| 267 |
|
| 268 |
return 0; |
| 269 |
} |
| 270 |
|
| 271 |
static int ltc4162l_get_vbat(struct ltc4162l_info *info, |
| 272 |
unsigned int reg, |
| 273 |
union power_supply_propval *val) |
| 274 |
{ |
| 275 |
unsigned int regval, chem_type; |
| 276 |
int ret; |
| 277 |
|
| 278 |
ret = regmap_read(info->regmap, reg, ®val); |
| 279 |
if (ret) |
| 280 |
return ret; |
| 281 |
|
| 282 |
/* |
| 283 |
* cell_count × scaling factor |
| 284 |
* For ltc4162-s, it uses a cell_count value of 2 for each group of 3 |
| 285 |
* physical (2V) cells, thus will return 2, 4, 6, 8 for 6V, 12V, 18V, |
| 286 |
* and 24V respectively, and has to divide by 2 to multiply the scale |
| 287 |
* factor by 1, 2, 3, or 4 to represent a 6V, 12V, 18V, or 24V battery |
| 288 |
* respectively. |
| 289 |
*/ |
| 290 |
chem_type = ltc4162l_get_chem_type(info); |
| 291 |
switch (chem_type) { |
| 292 |
case ltc4162_lad ... ltc4162_fst: |
| 293 |
regval *= 1924; |
| 294 |
regval *= ltc4162l_get_cell_count(info); |
| 295 |
regval /= 10; |
| 296 |
val->intval = regval; |
| 297 |
|
| 298 |
return 0; |
| 299 |
case ltc4162_sst ... ltc4162_sad: |
| 300 |
regval *= 3848; |
| 301 |
regval *= ltc4162l_get_cell_count(info) / 2; |
| 302 |
regval /= 10; |
| 303 |
val->intval = regval; |
| 304 |
|
| 305 |
return 0; |
| 306 |
default: |
| 307 |
return -EINVAL; |
| 308 |
} |
| 309 |
} |
| 310 |
|
| 311 |
static int ltc4015_get_vbat(struct ltc4162l_info *info, |
| 312 |
unsigned int reg, |
| 313 |
union power_supply_propval *val) |
| 314 |
{ |
| 315 |
unsigned int regval, chem_type; |
| 316 |
int ret; |
| 317 |
|
| 318 |
ret = regmap_read(info->regmap, reg, ®val); |
| 319 |
if (ret) |
| 320 |
return ret; |
| 321 |
|
| 322 |
/* |
| 323 |
* cell count x scaling factor |
| 324 |
* ltc4015 lead-acid fixed and lead-acid programmable corresponds to |
| 325 |
* 0x7 and 0x8 chem respectively |
| 326 |
*/ |
| 327 |
chem_type = ltc4162l_get_chem_type(info); |
| 328 |
switch (chem_type) { |
| 329 |
case ltc4162_lad ... ltc4162_fst: |
| 330 |
regval *= 192264; |
| 331 |
regval *= ltc4162l_get_cell_count(info); |
| 332 |
regval /= 1000; |
| 333 |
val->intval = regval; |
| 334 |
|
| 335 |
return 0; |
| 336 |
case ltc4162_sst - 1 ... ltc4162_sad - 1: |
| 337 |
regval *= 128176; |
| 338 |
regval *= ltc4162l_get_cell_count(info); |
| 339 |
regval /= 1000; |
| 340 |
val->intval = regval; |
| 341 |
|
| 342 |
return 0; |
| 343 |
default: |
| 344 |
return -EINVAL; |
| 345 |
} |
| 346 |
} |
| 347 |
|
| 348 |
static int ltc4162l_get_ibat(struct ltc4162l_info *info, |
| 349 |
union power_supply_propval *val) |
| 350 |
{ |
| 351 |
const struct ltc4162l_chip_info *chip_info = info->chip_info; |
| 352 |
unsigned int regval; |
| 353 |
int ret; |
| 354 |
|
| 355 |
ret = regmap_read(info->regmap, LTC4162L_IBAT, ®val); |
| 356 |
if (ret) |
| 357 |
return ret; |
| 358 |
|
| 359 |
ret = (s16)(regval & 0xFFFF); |
| 360 |
val->intval = mult_frac(ret, chip_info->ibat_resolution_pv, info->rsnsb); |
| 361 |
|
| 362 |
return 0; |
| 363 |
} |
| 364 |
|
| 365 |
|
| 366 |
static int ltc4162l_get_input_voltage(struct ltc4162l_info *info, |
| 367 |
union power_supply_propval *val) |
| 368 |
{ |
| 369 |
const struct ltc4162l_chip_info *chip_info = info->chip_info; |
| 370 |
unsigned int regval; |
| 371 |
int ret; |
| 372 |
|
| 373 |
ret = regmap_read(info->regmap, LTC4162L_VIN, ®val); |
| 374 |
if (ret) |
| 375 |
return ret; |
| 376 |
|
| 377 |
val->intval = regval * chip_info->vin_resolution_uv; |
| 378 |
|
| 379 |
return 0; |
| 380 |
} |
| 381 |
|
| 382 |
static int ltc4162l_get_input_current(struct ltc4162l_info *info, |
| 383 |
union power_supply_propval *val) |
| 384 |
{ |
| 385 |
const struct ltc4162l_chip_info *chip_info = info->chip_info; |
| 386 |
unsigned int regval; |
| 387 |
int ret; |
| 388 |
|
| 389 |
ret = regmap_read(info->regmap, LTC4162L_IIN, ®val); |
| 390 |
if (ret) |
| 391 |
return ret; |
| 392 |
|
| 393 |
ret = (s16)(regval & 0xFFFF); |
| 394 |
ret *= chip_info->ibat_resolution_pv; |
| 395 |
ret /= info->rsnsi; |
| 396 |
|
| 397 |
val->intval = ret; |
| 398 |
|
| 399 |
return 0; |
| 400 |
} |
| 401 |
|
| 402 |
static int ltc4162l_get_icharge(struct ltc4162l_info *info, |
| 403 |
unsigned int reg, |
| 404 |
union power_supply_propval *val) |
| 405 |
{ |
| 406 |
unsigned int regval; |
| 407 |
int ret; |
| 408 |
|
| 409 |
ret = regmap_read(info->regmap, reg, ®val); |
| 410 |
if (ret) |
| 411 |
return ret; |
| 412 |
|
| 413 |
regval &= GENMASK(5, 0); |
| 414 |
|
| 415 |
/* The charge current servo level: (icharge_dac + 1) × 1mV/RSNSB */ |
| 416 |
++regval; |
| 417 |
val->intval = 10000u * mult_frac(regval, 100000u, info->rsnsb); |
| 418 |
|
| 419 |
return 0; |
| 420 |
} |
| 421 |
|
| 422 |
static int ltc4162l_set_icharge(struct ltc4162l_info *info, |
| 423 |
unsigned int reg, |
| 424 |
unsigned int value) |
| 425 |
{ |
| 426 |
value = mult_frac(value, info->rsnsb, 100000u); |
| 427 |
value /= 10000u; |
| 428 |
|
| 429 |
/* Round to lowest possible */ |
| 430 |
if (value) |
| 431 |
--value; |
| 432 |
|
| 433 |
if (value > 31) |
| 434 |
return -EINVAL; |
| 435 |
|
| 436 |
return regmap_write(info->regmap, reg, value); |
| 437 |
} |
| 438 |
|
| 439 |
|
| 440 |
static int ltc4162l_get_vcharge(struct ltc4162l_info *info, |
| 441 |
unsigned int reg, |
| 442 |
union power_supply_propval *val) |
| 443 |
{ |
| 444 |
unsigned int regval, chem_type; |
| 445 |
int ret; |
| 446 |
u32 voltage; |
| 447 |
|
| 448 |
ret = regmap_read(info->regmap, reg, ®val); |
| 449 |
if (ret) |
| 450 |
return ret; |
| 451 |
|
| 452 |
regval &= GENMASK(5, 0); |
| 453 |
|
| 454 |
/* |
| 455 |
* charge voltage setting can be computed from |
| 456 |
* cell_count × (vcharge_setting × a + b) |
| 457 |
* where vcharge_setting ranges from 0 to c (d). |
| 458 |
* for ltc4162l: a = 12.5mV , b = 3.8125V, c = 31, d = 4.2Vmax |
| 459 |
* for ltc4162f: a = 12.5mV , b = 3.4125V, c = 31, d = 3.8Vmax |
| 460 |
* |
| 461 |
* for ltc4162s, the charge voltage setting can be computed from |
| 462 |
* N x (vcharge_setting x 28.571mV + 6.0V) |
| 463 |
* where N is 1, 2, 3, or 4 for 6V, 12V, 18V, or 24V battery respectively, |
| 464 |
* and vcharge_setting ranges from 0 to 31 |
| 465 |
*/ |
| 466 |
chem_type = ltc4162l_get_chem_type(info); |
| 467 |
switch (chem_type) { |
| 468 |
case ltc4162_lad ... ltc4162_l40: |
| 469 |
voltage = 3812500 + (regval * 12500); |
| 470 |
voltage *= ltc4162l_get_cell_count(info); |
| 471 |
val->intval = voltage; |
| 472 |
|
| 473 |
return 0; |
| 474 |
case ltc4162_fad ... ltc4162_fst: |
| 475 |
voltage = 3412500 + (regval * 12500); |
| 476 |
voltage *= ltc4162l_get_cell_count(info); |
| 477 |
val->intval = voltage; |
| 478 |
|
| 479 |
return 0; |
| 480 |
case ltc4162_sst ... ltc4162_sad: |
| 481 |
voltage = 6000000 + (regval * 28571); |
| 482 |
voltage *= ltc4162l_get_cell_count(info) / 2; |
| 483 |
val->intval = voltage; |
| 484 |
|
| 485 |
return 0; |
| 486 |
default: |
| 487 |
return -EINVAL; |
| 488 |
} |
| 489 |
} |
| 490 |
|
| 491 |
static int ltc4015_get_vcharge(struct ltc4162l_info *info, |
| 492 |
unsigned int reg, |
| 493 |
union power_supply_propval *val) |
| 494 |
{ |
| 495 |
unsigned int regval, chem_type; |
| 496 |
int ret; |
| 497 |
u32 voltage; |
| 498 |
|
| 499 |
ret = regmap_read(info->regmap, reg, ®val); |
| 500 |
if (ret) |
| 501 |
return ret; |
| 502 |
|
| 503 |
regval &= GENMASK(5, 0); |
| 504 |
|
| 505 |
/* |
| 506 |
* charge voltage setting can be computed from: |
| 507 |
* cell_count × (vcharge_setting × a + b) |
| 508 |
* where vcharge_setting ranges from 0 to c (d). |
| 509 |
* Li-Ion: a = 1/80V, b = 3.8125V, c = 31, d = 4.2Vmax |
| 510 |
* LiFePO4: a = 1/80V, b = 3.4125V, c = 31, d = 3.8Vmax |
| 511 |
* Lead Acid: a = 1/105V, b = 2V, c = 35, d = 2.6Vmax |
| 512 |
*/ |
| 513 |
chem_type = ltc4162l_get_chem_type(info); |
| 514 |
switch (chem_type) { |
| 515 |
case ltc4162_lad ... ltc4162_l40: |
| 516 |
voltage = 3812500 + (regval * 12500); |
| 517 |
voltage *= ltc4162l_get_cell_count(info); |
| 518 |
val->intval = voltage; |
| 519 |
|
| 520 |
return 0; |
| 521 |
case ltc4162_fad ... ltc4162_fst: |
| 522 |
voltage = 3412500 + (regval * 12500); |
| 523 |
voltage *= ltc4162l_get_cell_count(info); |
| 524 |
val->intval = voltage; |
| 525 |
|
| 526 |
return 0; |
| 527 |
case ltc4162_sst - 1 ... ltc4162_sad - 1: |
| 528 |
voltage = 2000000 + mult_frac(regval, 1000000, 105); |
| 529 |
voltage *= ltc4162l_get_cell_count(info); |
| 530 |
val->intval = voltage; |
| 531 |
|
| 532 |
return 0; |
| 533 |
default: |
| 534 |
return -EINVAL; |
| 535 |
} |
| 536 |
} |
| 537 |
|
| 538 |
static int ltc4162l_vcharge(unsigned int base_voltage, |
| 539 |
unsigned int scale_factor, |
| 540 |
unsigned int range, |
| 541 |
unsigned int value, |
| 542 |
u8 cell_count) |
| 543 |
{ |
| 544 |
value /= cell_count; |
| 545 |
|
| 546 |
if (value < base_voltage) |
| 547 |
return -EINVAL; |
| 548 |
|
| 549 |
value -= base_voltage; |
| 550 |
value /= scale_factor; |
| 551 |
|
| 552 |
if (value > range) |
| 553 |
return -EINVAL; |
| 554 |
|
| 555 |
return value; |
| 556 |
} |
| 557 |
|
| 558 |
static int ltc4162l_set_vcharge(struct ltc4162l_info *info, |
| 559 |
unsigned int reg, |
| 560 |
unsigned int value) |
| 561 |
{ |
| 562 |
unsigned int chem_type; |
| 563 |
u8 cell_count; |
| 564 |
|
| 565 |
chem_type = ltc4162l_get_chem_type(info); |
| 566 |
switch (chem_type) { |
| 567 |
case ltc4162_lad ... ltc4162_l40: |
| 568 |
cell_count = ltc4162l_get_cell_count(info); |
| 569 |
if (!cell_count) |
| 570 |
return -EBUSY; |
| 571 |
|
| 572 |
value = ltc4162l_vcharge(3812500, 12500, 31, value, cell_count); |
| 573 |
return regmap_write(info->regmap, reg, value); |
| 574 |
case ltc4162_fad ... ltc4162_fst: |
| 575 |
cell_count = ltc4162l_get_cell_count(info); |
| 576 |
if (!cell_count) |
| 577 |
return -EBUSY; |
| 578 |
|
| 579 |
value = ltc4162l_vcharge(3412500, 12500, 31, value, cell_count); |
| 580 |
return regmap_write(info->regmap, reg, value); |
| 581 |
case ltc4162_sst ... ltc4162_sad: |
| 582 |
cell_count = ltc4162l_get_cell_count(info) / 2; |
| 583 |
if (!cell_count) |
| 584 |
return -EBUSY; |
| 585 |
|
| 586 |
value = ltc4162l_vcharge(6000000, 28571, 31, value, cell_count); |
| 587 |
return regmap_write(info->regmap, reg, value); |
| 588 |
default: |
| 589 |
return -EINVAL; |
| 590 |
} |
| 591 |
} |
| 592 |
|
| 593 |
static int ltc4015_set_vcharge(struct ltc4162l_info *info, |
| 594 |
unsigned int reg, |
| 595 |
unsigned int value) |
| 596 |
{ |
| 597 |
unsigned int chem_type; |
| 598 |
u8 cell_count; |
| 599 |
|
| 600 |
chem_type = ltc4162l_get_chem_type(info); |
| 601 |
switch (chem_type) { |
| 602 |
case ltc4162_lad ... ltc4162_l40: |
| 603 |
cell_count = ltc4162l_get_cell_count(info); |
| 604 |
if (!cell_count) |
| 605 |
return -EBUSY; |
| 606 |
|
| 607 |
value = ltc4162l_vcharge(3812500, 12500, 31, value, cell_count); |
| 608 |
return regmap_write(info->regmap, reg, value); |
| 609 |
case ltc4162_fad ... ltc4162_fst: |
| 610 |
cell_count = ltc4162l_get_cell_count(info); |
| 611 |
if (!cell_count) |
| 612 |
return -EBUSY; |
| 613 |
|
| 614 |
value = ltc4162l_vcharge(3412500, 12500, 31, value, cell_count); |
| 615 |
return regmap_write(info->regmap, reg, value); |
| 616 |
case ltc4162_sst - 1 ... ltc4162_sad - 1: |
| 617 |
cell_count = ltc4162l_get_cell_count(info); |
| 618 |
if (!cell_count) |
| 619 |
return -EBUSY; |
| 620 |
|
| 621 |
value = ltc4162l_vcharge(2000000, 1000000 / 105, 35, |
| 622 |
value, cell_count); |
| 623 |
return regmap_write(info->regmap, reg, value); |
| 624 |
default: |
| 625 |
return -EINVAL; |
| 626 |
} |
| 627 |
} |
| 628 |
|
| 629 |
static int ltc4162l_get_iin_limit_dac(struct ltc4162l_info *info, |
| 630 |
union power_supply_propval *val) |
| 631 |
{ |
| 632 |
unsigned int regval; |
| 633 |
int ret; |
| 634 |
|
| 635 |
ret = regmap_read(info->regmap, LTC4162L_IIN_LIMIT_DAC, ®val); |
| 636 |
if (ret) |
| 637 |
return ret; |
| 638 |
|
| 639 |
regval &= GENMASK(5, 0); |
| 640 |
|
| 641 |
/* (iin_limit_dac + 1) × 500μV / RSNSI */ |
| 642 |
++regval; |
| 643 |
regval *= 5000000u; |
| 644 |
regval /= info->rsnsi; |
| 645 |
val->intval = 100u * regval; |
| 646 |
|
| 647 |
return 0; |
| 648 |
} |
| 649 |
|
| 650 |
static int ltc4162l_set_iin_limit(struct ltc4162l_info *info, |
| 651 |
unsigned int value) |
| 652 |
{ |
| 653 |
unsigned int regval; |
| 654 |
|
| 655 |
regval = mult_frac(value, info->rsnsi, 50000u); |
| 656 |
regval /= 10000u; |
| 657 |
if (regval) |
| 658 |
--regval; |
| 659 |
if (regval > 63) |
| 660 |
regval = 63; |
| 661 |
|
| 662 |
return regmap_write(info->regmap, LTC4162L_IIN_LIMIT_TARGET, regval); |
| 663 |
} |
| 664 |
|
| 665 |
static int ltc4162l_get_die_temp(struct ltc4162l_info *info, |
| 666 |
union power_supply_propval *val) |
| 667 |
{ |
| 668 |
unsigned int regval; |
| 669 |
int ret; |
| 670 |
|
| 671 |
ret = regmap_read(info->regmap, LTC4162L_DIE_TEMPERATURE, ®val); |
| 672 |
if (ret) |
| 673 |
return ret; |
| 674 |
|
| 675 |
/* die_temp × 0.0215°C/LSB - 264.4°C */ |
| 676 |
ret = (s16)(regval & 0xFFFF); |
| 677 |
ret *= 215; |
| 678 |
ret /= 100; /* Centidegrees scale */ |
| 679 |
ret -= 26440; |
| 680 |
val->intval = ret; |
| 681 |
|
| 682 |
return 0; |
| 683 |
} |
| 684 |
|
| 685 |
static int ltc4015_get_die_temp(struct ltc4162l_info *info, |
| 686 |
union power_supply_propval *val) |
| 687 |
{ |
| 688 |
unsigned int regval; |
| 689 |
int ret; |
| 690 |
|
| 691 |
ret = regmap_read(info->regmap, LTC4162L_DIE_TEMPERATURE, ®val); |
| 692 |
if (ret) |
| 693 |
return ret; |
| 694 |
|
| 695 |
/* (die_temp - 12010) / 45.6°C */ |
| 696 |
ret = (s16)(regval & 0xFFFF); |
| 697 |
ret -= 12010; |
| 698 |
ret *= 1000; |
| 699 |
ret /= 456; |
| 700 |
val->intval = ret; |
| 701 |
|
| 702 |
return 0; |
| 703 |
} |
| 704 |
|
| 705 |
static int ltc4162l_get_term_current(struct ltc4162l_info *info, |
| 706 |
union power_supply_propval *val) |
| 707 |
{ |
| 708 |
const struct ltc4162l_chip_info *chip_info = info->chip_info; |
| 709 |
unsigned int regval; |
| 710 |
int ret; |
| 711 |
|
| 712 |
ret = regmap_read(info->regmap, LTC4162L_CHARGER_CONFIG_BITS, ®val); |
| 713 |
if (ret) |
| 714 |
return ret; |
| 715 |
|
| 716 |
/* Check if C_OVER_X_THRESHOLD is enabled */ |
| 717 |
if (!(regval & BIT(2))) { |
| 718 |
val->intval = 0; |
| 719 |
return 0; |
| 720 |
} |
| 721 |
|
| 722 |
ret = regmap_read(info->regmap, LTC4162L_C_OVER_X_THRESHOLD, ®val); |
| 723 |
if (ret) |
| 724 |
return ret; |
| 725 |
|
| 726 |
regval *= chip_info->ibat_resolution_pv; |
| 727 |
regval /= info->rsnsb; |
| 728 |
val->intval = regval; |
| 729 |
|
| 730 |
return 0; |
| 731 |
} |
| 732 |
|
| 733 |
static int ltc4162l_set_term_current(struct ltc4162l_info *info, |
| 734 |
unsigned int value) |
| 735 |
{ |
| 736 |
int ret; |
| 737 |
unsigned int regval; |
| 738 |
|
| 739 |
if (!value) { |
| 740 |
/* Disable en_c_over_x_term when set to zero */ |
| 741 |
return regmap_update_bits(info->regmap, |
| 742 |
LTC4162L_CHARGER_CONFIG_BITS, |
| 743 |
BIT(2), 0); |
| 744 |
} |
| 745 |
|
| 746 |
regval = mult_frac(value, info->rsnsb, 14660u); |
| 747 |
regval /= 100u; |
| 748 |
|
| 749 |
ret = regmap_write(info->regmap, LTC4162L_C_OVER_X_THRESHOLD, regval); |
| 750 |
if (ret) |
| 751 |
return ret; |
| 752 |
|
| 753 |
/* Set en_c_over_x_term after changing the threshold value */ |
| 754 |
return regmap_update_bits(info->regmap, LTC4162L_CHARGER_CONFIG_BITS, |
| 755 |
BIT(2), BIT(2)); |
| 756 |
} |
| 757 |
|
| 758 |
/* Custom properties */ |
| 759 |
static const char * const ltc4162l_charge_status_name[] = { |
| 760 |
"ilim_reg_active", /* 32 */ |
| 761 |
"thermal_reg_active", |
| 762 |
"vin_uvcl_active", |
| 763 |
"iin_limit_active", |
| 764 |
"constant_current", |
| 765 |
"constant_voltage", |
| 766 |
"charger_off" /* 0 */ |
| 767 |
}; |
| 768 |
|
| 769 |
static ssize_t charge_status_show(struct device *dev, |
| 770 |
struct device_attribute *attr, char *buf) |
| 771 |
{ |
| 772 |
struct power_supply *psy = to_power_supply(dev); |
| 773 |
struct ltc4162l_info *info = power_supply_get_drvdata(psy); |
| 774 |
const char *result = ltc4162l_charge_status_name[ |
| 775 |
ARRAY_SIZE(ltc4162l_charge_status_name) - 1]; |
| 776 |
unsigned int regval; |
| 777 |
unsigned int mask; |
| 778 |
unsigned int index; |
| 779 |
int ret; |
| 780 |
|
| 781 |
ret = regmap_read(info->regmap, LTC4162L_CHARGE_STATUS, ®val); |
| 782 |
if (ret) |
| 783 |
return ret; |
| 784 |
|
| 785 |
/* Only one bit is set according to datasheet, let's be safe here */ |
| 786 |
for (mask = 32, index = 0; mask != 0; mask >>= 1, ++index) { |
| 787 |
if (regval & mask) { |
| 788 |
result = ltc4162l_charge_status_name[index]; |
| 789 |
break; |
| 790 |
} |
| 791 |
} |
| 792 |
|
| 793 |
return sysfs_emit(buf, "%s\n", result); |
| 794 |
} |
| 795 |
static DEVICE_ATTR_RO(charge_status); |
| 796 |
|
| 797 |
static ssize_t vbat_show(struct device *dev, |
| 798 |
struct device_attribute *attr, char *buf) |
| 799 |
{ |
| 800 |
struct power_supply *psy = to_power_supply(dev); |
| 801 |
struct ltc4162l_info *info = power_supply_get_drvdata(psy); |
| 802 |
const struct ltc4162l_chip_info *chip_info = info->chip_info; |
| 803 |
union power_supply_propval val; |
| 804 |
int ret; |
| 805 |
|
| 806 |
ret = chip_info->get_vbat(info, LTC4162L_VBAT, &val); |
| 807 |
if (ret) |
| 808 |
return ret; |
| 809 |
|
| 810 |
return sysfs_emit(buf, "%d\n", val.intval); |
| 811 |
} |
| 812 |
static DEVICE_ATTR_RO(vbat); |
| 813 |
|
| 814 |
static ssize_t vbat_avg_show(struct device *dev, |
| 815 |
struct device_attribute *attr, char *buf) |
| 816 |
{ |
| 817 |
struct power_supply *psy = to_power_supply(dev); |
| 818 |
struct ltc4162l_info *info = power_supply_get_drvdata(psy); |
| 819 |
const struct ltc4162l_chip_info *chip_info = info->chip_info; |
| 820 |
union power_supply_propval val; |
| 821 |
int ret; |
| 822 |
|
| 823 |
ret = chip_info->get_vbat(info, LTC4162L_VBAT_FILT, &val); |
| 824 |
if (ret) |
| 825 |
return ret; |
| 826 |
|
| 827 |
return sysfs_emit(buf, "%d\n", val.intval); |
| 828 |
} |
| 829 |
static DEVICE_ATTR_RO(vbat_avg); |
| 830 |
|
| 831 |
static ssize_t ibat_show(struct device *dev, |
| 832 |
struct device_attribute *attr, char *buf) |
| 833 |
{ |
| 834 |
struct power_supply *psy = to_power_supply(dev); |
| 835 |
struct ltc4162l_info *info = power_supply_get_drvdata(psy); |
| 836 |
union power_supply_propval val; |
| 837 |
int ret; |
| 838 |
|
| 839 |
ret = ltc4162l_get_ibat(info, &val); |
| 840 |
if (ret) |
| 841 |
return ret; |
| 842 |
|
| 843 |
return sysfs_emit(buf, "%d\n", val.intval); |
| 844 |
} |
| 845 |
static DEVICE_ATTR_RO(ibat); |
| 846 |
|
| 847 |
static ssize_t force_telemetry_show(struct device *dev, |
| 848 |
struct device_attribute *attr, char *buf) |
| 849 |
{ |
| 850 |
struct power_supply *psy = to_power_supply(dev); |
| 851 |
struct ltc4162l_info *info = power_supply_get_drvdata(psy); |
| 852 |
unsigned int regval; |
| 853 |
int ret; |
| 854 |
|
| 855 |
ret = regmap_read(info->regmap, LTC4162L_CONFIG_BITS_REG, ®val); |
| 856 |
if (ret) |
| 857 |
return ret; |
| 858 |
|
| 859 |
return sysfs_emit(buf, "%u\n", regval & |
| 860 |
info->chip_info->telemetry_mask ? 1 : 0); |
| 861 |
} |
| 862 |
|
| 863 |
static ssize_t force_telemetry_store(struct device *dev, |
| 864 |
struct device_attribute *attr, |
| 865 |
const char *buf, |
| 866 |
size_t count) |
| 867 |
{ |
| 868 |
struct power_supply *psy = to_power_supply(dev); |
| 869 |
struct ltc4162l_info *info = power_supply_get_drvdata(psy); |
| 870 |
int ret; |
| 871 |
unsigned int value; |
| 872 |
|
| 873 |
ret = kstrtouint(buf, 0, &value); |
| 874 |
if (ret < 0) |
| 875 |
return ret; |
| 876 |
|
| 877 |
ret = regmap_update_bits(info->regmap, LTC4162L_CONFIG_BITS_REG, |
| 878 |
info->chip_info->telemetry_mask, |
| 879 |
value ? info->chip_info->telemetry_mask : 0); |
| 880 |
if (ret < 0) |
| 881 |
return ret; |
| 882 |
|
| 883 |
return count; |
| 884 |
} |
| 885 |
|
| 886 |
static DEVICE_ATTR_RW(force_telemetry); |
| 887 |
|
| 888 |
static ssize_t arm_ship_mode_show(struct device *dev, |
| 889 |
struct device_attribute *attr, char *buf) |
| 890 |
{ |
| 891 |
struct power_supply *psy = to_power_supply(dev); |
| 892 |
struct ltc4162l_info *info = power_supply_get_drvdata(psy); |
| 893 |
unsigned int regval; |
| 894 |
int ret; |
| 895 |
|
| 896 |
ret = regmap_read(info->regmap, LTC4162L_ARM_SHIP_MODE, ®val); |
| 897 |
if (ret) |
| 898 |
return ret; |
| 899 |
|
| 900 |
return sysfs_emit(buf, "%u\n", |
| 901 |
regval == LTC4162L_ARM_SHIP_MODE_MAGIC ? 1 : 0); |
| 902 |
} |
| 903 |
|
| 904 |
static ssize_t arm_ship_mode_store(struct device *dev, |
| 905 |
struct device_attribute *attr, |
| 906 |
const char *buf, |
| 907 |
size_t count) |
| 908 |
{ |
| 909 |
struct power_supply *psy = to_power_supply(dev); |
| 910 |
struct ltc4162l_info *info = power_supply_get_drvdata(psy); |
| 911 |
int ret; |
| 912 |
unsigned int value; |
| 913 |
|
| 914 |
ret = kstrtouint(buf, 0, &value); |
| 915 |
if (ret < 0) |
| 916 |
return ret; |
| 917 |
|
| 918 |
ret = regmap_write(info->regmap, LTC4162L_ARM_SHIP_MODE, |
| 919 |
value ? LTC4162L_ARM_SHIP_MODE_MAGIC : 0); |
| 920 |
if (ret < 0) |
| 921 |
return ret; |
| 922 |
|
| 923 |
return count; |
| 924 |
} |
| 925 |
|
| 926 |
static DEVICE_ATTR_RW(arm_ship_mode); |
| 927 |
|
| 928 |
static struct attribute *ltc4162l_sysfs_entries[] = { |
| 929 |
&dev_attr_charge_status.attr, |
| 930 |
&dev_attr_ibat.attr, |
| 931 |
&dev_attr_vbat.attr, |
| 932 |
&dev_attr_vbat_avg.attr, |
| 933 |
&dev_attr_force_telemetry.attr, |
| 934 |
&dev_attr_arm_ship_mode.attr, |
| 935 |
NULL, |
| 936 |
}; |
| 937 |
|
| 938 |
static const struct attribute_group ltc4162l_attr_group = { |
| 939 |
.name = NULL, /* put in device directory */ |
| 940 |
.attrs = ltc4162l_sysfs_entries, |
| 941 |
}; |
| 942 |
|
| 943 |
static const struct attribute_group *ltc4162l_attr_groups[] = { |
| 944 |
<c4162l_attr_group, |
| 945 |
NULL, |
| 946 |
}; |
| 947 |
|
| 948 |
static int ltc4162l_get_property(struct power_supply *psy, |
| 949 |
enum power_supply_property psp, |
| 950 |
union power_supply_propval *val) |
| 951 |
{ |
| 952 |
struct ltc4162l_info *info = power_supply_get_drvdata(psy); |
| 953 |
const struct ltc4162l_chip_info *chip_info = info->chip_info; |
| 954 |
|
| 955 |
switch (psp) { |
| 956 |
case POWER_SUPPLY_PROP_STATUS: |
| 957 |
return ltc4162l_get_status(info, val); |
| 958 |
case POWER_SUPPLY_PROP_CHARGE_TYPE: |
| 959 |
return ltc4162l_get_charge_type(info, val); |
| 960 |
case POWER_SUPPLY_PROP_HEALTH: |
| 961 |
return ltc4162l_get_health(info, val); |
| 962 |
case POWER_SUPPLY_PROP_ONLINE: |
| 963 |
return ltc4162l_get_online(info, val); |
| 964 |
case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| 965 |
return ltc4162l_get_input_voltage(info, val); |
| 966 |
case POWER_SUPPLY_PROP_CURRENT_NOW: |
| 967 |
return ltc4162l_get_input_current(info, val); |
| 968 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: |
| 969 |
return ltc4162l_get_icharge(info, |
| 970 |
LTC4162L_ICHARGE_DAC, val); |
| 971 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: |
| 972 |
return ltc4162l_get_icharge(info, |
| 973 |
LTC4162L_CHARGE_CURRENT_SETTING, val); |
| 974 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: |
| 975 |
return chip_info->get_vcharge(info, LTC4162L_VCHARGE_DAC, val); |
| 976 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: |
| 977 |
return chip_info->get_vcharge(info, LTC4162L_VCHARGE_SETTING, val); |
| 978 |
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| 979 |
return ltc4162l_get_iin_limit_dac(info, val); |
| 980 |
case POWER_SUPPLY_PROP_TEMP: |
| 981 |
return chip_info->get_die_temp(info, val); |
| 982 |
case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT: |
| 983 |
return ltc4162l_get_term_current(info, val); |
| 984 |
default: |
| 985 |
return -EINVAL; |
| 986 |
} |
| 987 |
} |
| 988 |
|
| 989 |
static int ltc4162l_set_property(struct power_supply *psy, |
| 990 |
enum power_supply_property psp, |
| 991 |
const union power_supply_propval *val) |
| 992 |
{ |
| 993 |
struct ltc4162l_info *info = power_supply_get_drvdata(psy); |
| 994 |
|
| 995 |
switch (psp) { |
| 996 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: |
| 997 |
return ltc4162l_set_icharge(info, |
| 998 |
LTC4162L_CHARGE_CURRENT_SETTING, val->intval); |
| 999 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: |
| 1000 |
return ltc4162l_set_vcharge(info, |
| 1001 |
LTC4162L_VCHARGE_SETTING, val->intval); |
| 1002 |
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| 1003 |
return ltc4162l_set_iin_limit(info, val->intval); |
| 1004 |
case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT: |
| 1005 |
return ltc4162l_set_term_current(info, val->intval); |
| 1006 |
default: |
| 1007 |
return -EINVAL; |
| 1008 |
} |
| 1009 |
} |
| 1010 |
|
| 1011 |
static int ltc4162l_property_is_writeable(struct power_supply *psy, |
| 1012 |
enum power_supply_property psp) |
| 1013 |
{ |
| 1014 |
switch (psp) { |
| 1015 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: |
| 1016 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: |
| 1017 |
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| 1018 |
case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT: |
| 1019 |
return 1; |
| 1020 |
default: |
| 1021 |
return 0; |
| 1022 |
} |
| 1023 |
} |
| 1024 |
|
| 1025 |
/* Charger power supply property routines */ |
| 1026 |
static enum power_supply_property ltc4162l_properties[] = { |
| 1027 |
POWER_SUPPLY_PROP_STATUS, |
| 1028 |
POWER_SUPPLY_PROP_CHARGE_TYPE, |
| 1029 |
POWER_SUPPLY_PROP_HEALTH, |
| 1030 |
POWER_SUPPLY_PROP_ONLINE, |
| 1031 |
POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| 1032 |
POWER_SUPPLY_PROP_CURRENT_NOW, |
| 1033 |
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, |
| 1034 |
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, |
| 1035 |
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, |
| 1036 |
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, |
| 1037 |
POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, |
| 1038 |
POWER_SUPPLY_PROP_TEMP, |
| 1039 |
POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT, |
| 1040 |
}; |
| 1041 |
|
| 1042 |
static const struct power_supply_desc ltc4162l_desc = { |
| 1043 |
.type = POWER_SUPPLY_TYPE_MAINS, |
| 1044 |
.properties = ltc4162l_properties, |
| 1045 |
.num_properties = ARRAY_SIZE(ltc4162l_properties), |
| 1046 |
.get_property = ltc4162l_get_property, |
| 1047 |
.set_property = ltc4162l_set_property, |
| 1048 |
.property_is_writeable = ltc4162l_property_is_writeable, |
| 1049 |
}; |
| 1050 |
|
| 1051 |
static const struct ltc4162l_chip_info ltc4162l_chip_info = { |
| 1052 |
.name = "ltc4162-l", |
| 1053 |
.get_vbat = ltc4162l_get_vbat, |
| 1054 |
.get_vcharge = ltc4162l_get_vcharge, |
| 1055 |
.set_vcharge = ltc4162l_set_vcharge, |
| 1056 |
.get_die_temp = ltc4162l_get_die_temp, |
| 1057 |
.ibat_resolution_pv = 1466000, |
| 1058 |
.vin_resolution_uv = 1649, |
| 1059 |
.telemetry_mask = BIT(2), |
| 1060 |
}; |
| 1061 |
|
| 1062 |
static const struct ltc4162l_chip_info ltc4162f_chip_info = { |
| 1063 |
.name = "ltc4162-f", |
| 1064 |
.get_vbat = ltc4162l_get_vbat, |
| 1065 |
.get_vcharge = ltc4162l_get_vcharge, |
| 1066 |
.set_vcharge = ltc4162l_set_vcharge, |
| 1067 |
.get_die_temp = ltc4162l_get_die_temp, |
| 1068 |
.ibat_resolution_pv = 1466000, |
| 1069 |
.vin_resolution_uv = 1649, |
| 1070 |
.telemetry_mask = BIT(2), |
| 1071 |
}; |
| 1072 |
|
| 1073 |
static const struct ltc4162l_chip_info ltc4162s_chip_info = { |
| 1074 |
.name = "ltc4162-s", |
| 1075 |
.get_vbat = ltc4162l_get_vbat, |
| 1076 |
.get_vcharge = ltc4162l_get_vcharge, |
| 1077 |
.set_vcharge = ltc4162l_set_vcharge, |
| 1078 |
.get_die_temp = ltc4162l_get_die_temp, |
| 1079 |
.ibat_resolution_pv = 1466000, |
| 1080 |
.vin_resolution_uv = 1649, |
| 1081 |
.telemetry_mask = BIT(2), |
| 1082 |
}; |
| 1083 |
|
| 1084 |
static const struct ltc4162l_chip_info ltc4015_chip_info = { |
| 1085 |
.name = "ltc4015", |
| 1086 |
.get_vbat = ltc4015_get_vbat, |
| 1087 |
.get_vcharge = ltc4015_get_vcharge, |
| 1088 |
.set_vcharge = ltc4015_set_vcharge, |
| 1089 |
.get_die_temp = ltc4015_get_die_temp, |
| 1090 |
.ibat_resolution_pv = 1464870, |
| 1091 |
.vin_resolution_uv = 1648, |
| 1092 |
.telemetry_mask = BIT(4), |
| 1093 |
}; |
| 1094 |
|
| 1095 |
static bool ltc4162l_is_writeable_reg(struct device *dev, unsigned int reg) |
| 1096 |
{ |
| 1097 |
/* all registers up to this one are writeable */ |
| 1098 |
if (reg <= LTC4162L_CHARGER_CONFIG_BITS) |
| 1099 |
return true; |
| 1100 |
|
| 1101 |
/* The ALERTS registers can be written to clear alerts */ |
| 1102 |
if (reg >= LTC4162L_LIMIT_ALERTS_REG && |
| 1103 |
reg <= LTC4162L_CHARGE_STATUS_ALERTS_REG) |
| 1104 |
return true; |
| 1105 |
|
| 1106 |
return false; |
| 1107 |
} |
| 1108 |
|
| 1109 |
static bool ltc4162l_is_volatile_reg(struct device *dev, unsigned int reg) |
| 1110 |
{ |
| 1111 |
/* all registers after this one are read-only status registers */ |
| 1112 |
return reg > LTC4162L_CHARGER_CONFIG_BITS; |
| 1113 |
} |
| 1114 |
|
| 1115 |
static const struct regmap_config ltc4162l_regmap_config = { |
| 1116 |
.reg_bits = 8, |
| 1117 |
.val_bits = 16, |
| 1118 |
.val_format_endian = REGMAP_ENDIAN_LITTLE, |
| 1119 |
.writeable_reg = ltc4162l_is_writeable_reg, |
| 1120 |
.volatile_reg = ltc4162l_is_volatile_reg, |
| 1121 |
.max_register = LTC4162L_INPUT_UNDERVOLTAGE_DAC, |
| 1122 |
.cache_type = REGCACHE_MAPLE, |
| 1123 |
}; |
| 1124 |
|
| 1125 |
static void ltc4162l_clear_interrupts(struct ltc4162l_info *info) |
| 1126 |
{ |
| 1127 |
/* Acknowledge interrupt to chip by clearing all events */ |
| 1128 |
regmap_write(info->regmap, LTC4162L_LIMIT_ALERTS_REG, 0); |
| 1129 |
regmap_write(info->regmap, LTC4162L_CHARGER_STATE_ALERTS_REG, 0); |
| 1130 |
regmap_write(info->regmap, LTC4162L_CHARGE_STATUS_ALERTS_REG, 0); |
| 1131 |
} |
| 1132 |
|
| 1133 |
static int ltc4162l_probe(struct i2c_client *client) |
| 1134 |
{ |
| 1135 |
struct i2c_adapter *adapter = client->adapter; |
| 1136 |
struct device *dev = &client->dev; |
| 1137 |
struct ltc4162l_info *info; |
| 1138 |
struct power_supply_config ltc4162l_config = {}; |
| 1139 |
struct power_supply_desc *desc; |
| 1140 |
const struct ltc4162l_chip_info *chip_info; |
| 1141 |
u32 value; |
| 1142 |
int ret; |
| 1143 |
|
| 1144 |
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) { |
| 1145 |
dev_err(dev, "No support for SMBUS_WORD_DATA\n"); |
| 1146 |
return -ENODEV; |
| 1147 |
} |
| 1148 |
info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); |
| 1149 |
if (!info) |
| 1150 |
return -ENOMEM; |
| 1151 |
|
| 1152 |
info->client = client; |
| 1153 |
i2c_set_clientdata(client, info); |
| 1154 |
|
| 1155 |
chip_info = i2c_get_match_data(client); |
| 1156 |
if (!chip_info) |
| 1157 |
return -ENODEV; |
| 1158 |
|
| 1159 |
info->chip_info = chip_info; |
| 1160 |
|
| 1161 |
info->regmap = devm_regmap_init_i2c(client, <c4162l_regmap_config); |
| 1162 |
if (IS_ERR(info->regmap)) { |
| 1163 |
dev_err(dev, "Failed to initialize register map\n"); |
| 1164 |
return PTR_ERR(info->regmap); |
| 1165 |
} |
| 1166 |
|
| 1167 |
ret = device_property_read_u32(dev, "lltc,rsnsb-micro-ohms", |
| 1168 |
&info->rsnsb); |
| 1169 |
if (ret) { |
| 1170 |
dev_err(dev, "Missing lltc,rsnsb-micro-ohms property\n"); |
| 1171 |
return ret; |
| 1172 |
} |
| 1173 |
if (!info->rsnsb) |
| 1174 |
return -EINVAL; |
| 1175 |
|
| 1176 |
ret = device_property_read_u32(dev, "lltc,rsnsi-micro-ohms", |
| 1177 |
&info->rsnsi); |
| 1178 |
if (ret) { |
| 1179 |
dev_err(dev, "Missing lltc,rsnsi-micro-ohms property\n"); |
| 1180 |
return ret; |
| 1181 |
} |
| 1182 |
if (!info->rsnsi) |
| 1183 |
return -EINVAL; |
| 1184 |
|
| 1185 |
if (!device_property_read_u32(dev, "lltc,cell-count", &value)) |
| 1186 |
info->cell_count = value; |
| 1187 |
|
| 1188 |
ltc4162l_config.fwnode = dev_fwnode(dev); |
| 1189 |
ltc4162l_config.drv_data = info; |
| 1190 |
ltc4162l_config.attr_grp = ltc4162l_attr_groups; |
| 1191 |
|
| 1192 |
/* Duplicate the default descriptor to set name based on chip_info. */ |
| 1193 |
desc = devm_kmemdup(dev, <c4162l_desc, |
| 1194 |
sizeof(struct power_supply_desc), GFP_KERNEL); |
| 1195 |
if (!desc) |
| 1196 |
return -ENOMEM; |
| 1197 |
|
| 1198 |
desc->name = chip_info->name; |
| 1199 |
|
| 1200 |
info->charger = devm_power_supply_register(dev, desc, <c4162l_config); |
| 1201 |
if (IS_ERR(info->charger)) { |
| 1202 |
dev_err(dev, "Failed to register charger\n"); |
| 1203 |
return PTR_ERR(info->charger); |
| 1204 |
} |
| 1205 |
|
| 1206 |
/* Disable the threshold alerts, we're not using them */ |
| 1207 |
regmap_write(info->regmap, LTC4162L_EN_LIMIT_ALERTS_REG, 0); |
| 1208 |
|
| 1209 |
/* Enable interrupts on all status changes */ |
| 1210 |
regmap_write(info->regmap, LTC4162L_EN_CHARGER_STATE_ALERTS_REG, |
| 1211 |
0x1fff); |
| 1212 |
regmap_write(info->regmap, LTC4162L_EN_CHARGE_STATUS_ALERTS_REG, 0x1f); |
| 1213 |
|
| 1214 |
ltc4162l_clear_interrupts(info); |
| 1215 |
|
| 1216 |
return 0; |
| 1217 |
} |
| 1218 |
|
| 1219 |
static void ltc4162l_alert(struct i2c_client *client, |
| 1220 |
enum i2c_alert_protocol type, unsigned int flag) |
| 1221 |
{ |
| 1222 |
struct ltc4162l_info *info = i2c_get_clientdata(client); |
| 1223 |
|
| 1224 |
if (type != I2C_PROTOCOL_SMBUS_ALERT) |
| 1225 |
return; |
| 1226 |
|
| 1227 |
ltc4162l_clear_interrupts(info); |
| 1228 |
power_supply_changed(info->charger); |
| 1229 |
} |
| 1230 |
|
| 1231 |
static const struct i2c_device_id ltc4162l_i2c_id_table[] = { |
| 1232 |
{ "ltc4015", (kernel_ulong_t)<c4015_chip_info }, |
| 1233 |
{ "ltc4162-f", (kernel_ulong_t)<c4162f_chip_info }, |
| 1234 |
{ "ltc4162-l", (kernel_ulong_t)<c4162l_chip_info }, |
| 1235 |
{ "ltc4162-s", (kernel_ulong_t)<c4162s_chip_info }, |
| 1236 |
{ } |
| 1237 |
}; |
| 1238 |
MODULE_DEVICE_TABLE(i2c, ltc4162l_i2c_id_table); |
| 1239 |
|
| 1240 |
static const struct of_device_id ltc4162l_of_match[] __maybe_unused = { |
| 1241 |
{ .compatible = "lltc,ltc4015", .data = <c4015_chip_info }, |
| 1242 |
{ .compatible = "lltc,ltc4162-f", .data = <c4162f_chip_info }, |
| 1243 |
{ .compatible = "lltc,ltc4162-l", .data = <c4162l_chip_info }, |
| 1244 |
{ .compatible = "lltc,ltc4162-s", .data = <c4162s_chip_info }, |
| 1245 |
{ } |
| 1246 |
}; |
| 1247 |
MODULE_DEVICE_TABLE(of, ltc4162l_of_match); |
| 1248 |
|
| 1249 |
static struct i2c_driver ltc4162l_driver = { |
| 1250 |
.probe = ltc4162l_probe, |
| 1251 |
.alert = ltc4162l_alert, |
| 1252 |
.id_table = ltc4162l_i2c_id_table, |
| 1253 |
.driver = { |
| 1254 |
.name = "ltc4162-l-charger", |
| 1255 |
.of_match_table = of_match_ptr(ltc4162l_of_match), |
| 1256 |
}, |
| 1257 |
}; |
| 1258 |
module_i2c_driver(ltc4162l_driver); |
| 1259 |
|
| 1260 |
MODULE_LICENSE("GPL"); |
| 1261 |
MODULE_AUTHOR("Mike Looijmans <[email protected]>"); |
| 1262 |
MODULE_DESCRIPTION("LTC4162-L charger driver"); |