| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
// BQ2515X Battery Charger Driver |
| 3 |
// Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ |
| 4 |
|
| 5 |
#include <linux/err.h> |
| 6 |
#include <linux/i2c.h> |
| 7 |
#include <linux/init.h> |
| 8 |
#include <linux/kernel.h> |
| 9 |
#include <linux/module.h> |
| 10 |
#include <linux/gpio/consumer.h> |
| 11 |
#include <linux/power_supply.h> |
| 12 |
#include <linux/regmap.h> |
| 13 |
#include <linux/types.h> |
| 14 |
|
| 15 |
#define BQ2515X_MANUFACTURER "Texas Instruments" |
| 16 |
|
| 17 |
#define BQ2515X_STAT0 0x00 |
| 18 |
#define BQ2515X_STAT1 0x01 |
| 19 |
#define BQ2515X_STAT2 0x02 |
| 20 |
#define BQ2515X_FLAG0 0x03 |
| 21 |
#define BQ2515X_FLAG1 0x04 |
| 22 |
#define BQ2515X_FLAG2 0x05 |
| 23 |
#define BQ2515X_FLAG3 0x06 |
| 24 |
#define BQ2515X_MASK0 0x07 |
| 25 |
#define BQ2515X_MASK1 0x08 |
| 26 |
#define BQ2515X_MASK2 0x09 |
| 27 |
#define BQ2515X_MASK3 0x0a |
| 28 |
#define BQ2515X_VBAT_CTRL 0x12 |
| 29 |
#define BQ2515X_ICHG_CTRL 0x13 |
| 30 |
#define BQ2515X_PCHRGCTRL 0x14 |
| 31 |
#define BQ2515X_TERMCTRL 0x15 |
| 32 |
#define BQ2515X_BUVLO 0x16 |
| 33 |
#define BQ2515X_CHARGERCTRL0 0x17 |
| 34 |
#define BQ2515X_CHARGERCTRL1 0x18 |
| 35 |
#define BQ2515X_ILIMCTRL 0x19 |
| 36 |
#define BQ2515X_LDOCTRL 0x1d |
| 37 |
#define BQ2515X_MRCTRL 0x30 |
| 38 |
#define BQ2515X_ICCTRL0 0x35 |
| 39 |
#define BQ2515X_ICCTRL1 0x36 |
| 40 |
#define BQ2515X_ICCTRL2 0x37 |
| 41 |
#define BQ2515X_ADCCTRL0 0x40 |
| 42 |
#define BQ2515X_ADCCTRL1 0x41 |
| 43 |
#define BQ2515X_ADC_VBAT_M 0x42 |
| 44 |
#define BQ2515X_ADC_VBAT_L 0x43 |
| 45 |
#define BQ2515X_ADC_TS_M 0x44 |
| 46 |
#define BQ2515X_ADC_TS_L 0x45 |
| 47 |
#define BQ2515X_ADC_ICHG_M 0x46 |
| 48 |
#define BQ2515X_ADC_ICHG_L 0x47 |
| 49 |
#define BQ2515X_ADC_ADCIN_M 0x48 |
| 50 |
#define BQ2515X_ADC_ADCIN_L 0x49 |
| 51 |
#define BQ2515X_ADC_VIN_M 0x4a |
| 52 |
#define BQ2515X_ADC_VIN_L 0x4b |
| 53 |
#define BQ2515X_ADC_PMID_M 0x4c |
| 54 |
#define BQ2515X_ADC_PMID_L 0x4d |
| 55 |
#define BQ2515X_ADC_IIN_M 0x4e |
| 56 |
#define BQ2515X_ADC_IIN_L 0x4f |
| 57 |
#define BQ2515X_ADC_COMP1_M 0x52 |
| 58 |
#define BQ2515X_ADC_COMP1_L 0X53 |
| 59 |
#define BQ2515X_ADC_COMP2_M 0X54 |
| 60 |
#define BQ2515X_ADC_COMP2_L 0x55 |
| 61 |
#define BQ2515X_ADC_COMP3_M 0x56 |
| 62 |
#define BQ2515X_ADC_COMP3_L 0x57 |
| 63 |
#define BQ2515X_ADC_READ_EN 0x58 |
| 64 |
#define BQ2515X_TS_FASTCHGCTRL 0x61 |
| 65 |
#define BQ2515X_TS_COLD 0x62 |
| 66 |
#define BQ2515X_TS_COOL 0x63 |
| 67 |
#define BQ2515X_TS_WARM 0x64 |
| 68 |
#define BQ2515X_TS_HOT 0x65 |
| 69 |
#define BQ2515X_DEVICE_ID 0x6f |
| 70 |
|
| 71 |
#define BQ2515X_DEFAULT_ICHG_UA 10000 |
| 72 |
#define BQ25150_DEFAULT_ILIM_UA 100000 |
| 73 |
#define BQ25155_DEFAULT_ILIM_UA 500000 |
| 74 |
#define BQ2515X_DEFAULT_VBAT_REG_UV 4200000 |
| 75 |
#define BQ2515X_DEFAULT_IPRECHARGE_UA 2500 |
| 76 |
|
| 77 |
#define BQ2515X_DIVISOR 65536 |
| 78 |
#define BQ2515X_VBAT_BASE_VOLT 3600000 |
| 79 |
#define BQ2515X_VBAT_REG_MAX 4600000 |
| 80 |
#define BQ2515X_VBAT_REG_MIN 3600000 |
| 81 |
#define BQ2515X_VBAT_STEP_UV 10000 |
| 82 |
#define BQ2515X_UV_FACTOR 1000000 |
| 83 |
#define BQ2515X_VBAT_MULTIPLIER 6 |
| 84 |
#define BQ2515X_ICHG_DIVISOR 52429 |
| 85 |
#define BQ2515X_ICHG_CURR_STEP_THRESH_UA 318750 |
| 86 |
#define BQ2515X_ICHG_MIN_UA 0 |
| 87 |
#define BQ2515X_ICHG_MAX_UA 500000 |
| 88 |
#define BQ2515X_ICHG_RNG_1B0_UA 1250 |
| 89 |
#define BQ2515X_ICHG_RNG_1B1_UA 2500 |
| 90 |
#define BQ2515X_VLOWV_SEL_1B0_UV 3000000 |
| 91 |
#define BQ2515X_VLOWV_SEL_1B1_UV 2800000 |
| 92 |
#define BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA 18750 |
| 93 |
#define BQ2515X_PRECHRG_ICHRG_RNGE_3750_UA 37500 |
| 94 |
#define BQ2515X_TWAKE2_MIN_US 1700000 |
| 95 |
#define BQ2515X_TWAKE2_MAX_US 2300000 |
| 96 |
|
| 97 |
#define BQ2515X_ILIM_150MA 0x2 |
| 98 |
#define BQ2515X_ILIM_MASK 0x7 |
| 99 |
#define BQ2515X_ILIM_MIN 50000 |
| 100 |
#define BQ2515X_ILIM_MAX 600000 |
| 101 |
#define BQ2515X_HEALTH_MASK 0xf |
| 102 |
#define BQ2515X_ICHGRNG_MASK 0x80 |
| 103 |
#define BQ2515X_STAT0_MASK 0x0f |
| 104 |
#define BQ2515X_STAT1_MASK 0x1f |
| 105 |
#define BQ2515X_PRECHARGE_MASK 0x1f |
| 106 |
|
| 107 |
#define BQ2515X_TS_HOT_STAT BIT(0) |
| 108 |
#define BQ2515X_TS_WARM_STAT BIT(1) |
| 109 |
#define BQ2515X_TS_COOL_STAT BIT(2) |
| 110 |
#define BQ2515X_TS_COLD_STAT BIT(3) |
| 111 |
#define BQ2515X_SAFETY_TIMER_EXP BIT(5) |
| 112 |
|
| 113 |
#define BQ2515X_EN_VBAT_READ BIT(3) |
| 114 |
#define BQ2515X_EN_ICHG_READ BIT(5) |
| 115 |
|
| 116 |
#define BQ2515X_VIN_GOOD BIT(0) |
| 117 |
#define BQ2515X_CHRG_DONE BIT(5) |
| 118 |
#define BQ2515X_CV_CHRG_MODE BIT(6) |
| 119 |
|
| 120 |
#define BQ2515X_VIN_OVP_FAULT_STAT BIT(7) |
| 121 |
|
| 122 |
#define BQ2515X_WATCHDOG_DISABLE BIT(4) |
| 123 |
|
| 124 |
#define BQ2515X_ICHARGE_RANGE BIT(7) |
| 125 |
|
| 126 |
#define BQ2515X_VLOWV_SEL BIT(5) |
| 127 |
|
| 128 |
#define BQ2515X_CHARGER_DISABLE BIT(0) |
| 129 |
|
| 130 |
#define BQ2515X_HWRESET_14S_WD BIT(1) |
| 131 |
|
| 132 |
static const int bq2515x_ilim_lvl_values[] = { |
| 133 |
50000, 100000, 150000, 200000, 300000, 400000, 500000, 600000 |
| 134 |
}; |
| 135 |
|
| 136 |
/** |
| 137 |
* struct bq2515x_init_data - |
| 138 |
* @ilim: input current limit |
| 139 |
* @ichg: fast charge current |
| 140 |
* @vbatreg: battery regulation voltage |
| 141 |
* @iprechg: precharge current |
| 142 |
*/ |
| 143 |
struct bq2515x_init_data { |
| 144 |
int ilim; |
| 145 |
int ichg; |
| 146 |
int vbatreg; |
| 147 |
int iprechg; |
| 148 |
}; |
| 149 |
|
| 150 |
/** |
| 151 |
* struct bq2515x_info - |
| 152 |
* @regmap_config: register map config |
| 153 |
* @ilim: input current limit |
| 154 |
*/ |
| 155 |
struct bq2515x_info { |
| 156 |
const struct regmap_config *regmap_config; |
| 157 |
int ilim; |
| 158 |
}; |
| 159 |
|
| 160 |
/** |
| 161 |
* struct bq2515x_device - |
| 162 |
* @mains: mains properties |
| 163 |
* @battery: battery properties |
| 164 |
* @regmap: register map structure |
| 165 |
* @dev: device structure |
| 166 |
* |
| 167 |
* @reset_gpio: manual reset (MR) pin |
| 168 |
* @powerdown_gpio: low power mode pin |
| 169 |
* @ac_detect_gpio: power good (PG) pin |
| 170 |
* @ce_gpio: charge enable (CE) pin |
| 171 |
* |
| 172 |
* @info: device info |
| 173 |
* @model_name: string value describing device model |
| 174 |
* @mains_online: boolean value indicating power supply online |
| 175 |
* |
| 176 |
* @init_data: charger initialization data structure |
| 177 |
*/ |
| 178 |
struct bq2515x_device { |
| 179 |
struct power_supply *mains; |
| 180 |
struct power_supply *battery; |
| 181 |
struct regmap *regmap; |
| 182 |
struct device *dev; |
| 183 |
|
| 184 |
struct gpio_desc *reset_gpio; |
| 185 |
struct gpio_desc *powerdown_gpio; |
| 186 |
struct gpio_desc *ac_detect_gpio; |
| 187 |
struct gpio_desc *ce_gpio; |
| 188 |
|
| 189 |
const struct bq2515x_info *info; |
| 190 |
char model_name[I2C_NAME_SIZE]; |
| 191 |
bool mains_online; |
| 192 |
|
| 193 |
struct bq2515x_init_data init_data; |
| 194 |
}; |
| 195 |
|
| 196 |
static const struct reg_default bq25150_reg_defaults[] = { |
| 197 |
{BQ2515X_FLAG0, 0x0}, |
| 198 |
{BQ2515X_FLAG1, 0x0}, |
| 199 |
{BQ2515X_FLAG2, 0x0}, |
| 200 |
{BQ2515X_FLAG3, 0x0}, |
| 201 |
{BQ2515X_MASK0, 0x0}, |
| 202 |
{BQ2515X_MASK1, 0x0}, |
| 203 |
{BQ2515X_MASK2, 0x71}, |
| 204 |
{BQ2515X_MASK3, 0x0}, |
| 205 |
{BQ2515X_VBAT_CTRL, 0x3C}, |
| 206 |
{BQ2515X_ICHG_CTRL, 0x8}, |
| 207 |
{BQ2515X_PCHRGCTRL, 0x2}, |
| 208 |
{BQ2515X_TERMCTRL, 0x14}, |
| 209 |
{BQ2515X_BUVLO, 0x0}, |
| 210 |
{BQ2515X_CHARGERCTRL0, 0x82}, |
| 211 |
{BQ2515X_CHARGERCTRL1, 0x42}, |
| 212 |
{BQ2515X_ILIMCTRL, 0x1}, |
| 213 |
{BQ2515X_LDOCTRL, 0xB0}, |
| 214 |
{BQ2515X_MRCTRL, 0x2A}, |
| 215 |
{BQ2515X_ICCTRL0, 0x10}, |
| 216 |
{BQ2515X_ICCTRL1, 0x0}, |
| 217 |
{BQ2515X_ICCTRL2, 0x0}, |
| 218 |
{BQ2515X_ADCCTRL0, 0x2}, |
| 219 |
{BQ2515X_ADCCTRL1, 0x40}, |
| 220 |
{BQ2515X_ADC_COMP1_M, 0x23}, |
| 221 |
{BQ2515X_ADC_COMP1_L, 0x20}, |
| 222 |
{BQ2515X_ADC_COMP2_M, 0x38}, |
| 223 |
{BQ2515X_ADC_COMP2_L, 0x90}, |
| 224 |
{BQ2515X_ADC_COMP3_M, 0x0}, |
| 225 |
{BQ2515X_ADC_COMP3_L, 0x0}, |
| 226 |
{BQ2515X_ADC_READ_EN, 0x0}, |
| 227 |
{BQ2515X_TS_FASTCHGCTRL, 0x34}, |
| 228 |
{BQ2515X_TS_COLD, 0x7C}, |
| 229 |
{BQ2515X_TS_COOL, 0x6D}, |
| 230 |
{BQ2515X_TS_WARM, 0x38}, |
| 231 |
{BQ2515X_TS_HOT, 0x27}, |
| 232 |
{BQ2515X_DEVICE_ID, 0x20}, |
| 233 |
}; |
| 234 |
|
| 235 |
static const struct reg_default bq25155_reg_defaults[] = { |
| 236 |
{BQ2515X_FLAG0, 0x0}, |
| 237 |
{BQ2515X_FLAG1, 0x0}, |
| 238 |
{BQ2515X_FLAG2, 0x0}, |
| 239 |
{BQ2515X_FLAG3, 0x0}, |
| 240 |
{BQ2515X_MASK0, 0x0}, |
| 241 |
{BQ2515X_MASK1, 0x0}, |
| 242 |
{BQ2515X_MASK2, 0x71}, |
| 243 |
{BQ2515X_MASK3, 0x0}, |
| 244 |
{BQ2515X_VBAT_CTRL, 0x3C}, |
| 245 |
{BQ2515X_ICHG_CTRL, 0x8}, |
| 246 |
{BQ2515X_PCHRGCTRL, 0x2}, |
| 247 |
{BQ2515X_TERMCTRL, 0x14}, |
| 248 |
{BQ2515X_BUVLO, 0x0}, |
| 249 |
{BQ2515X_CHARGERCTRL0, 0x82}, |
| 250 |
{BQ2515X_CHARGERCTRL1, 0xC2}, |
| 251 |
{BQ2515X_ILIMCTRL, 0x6}, |
| 252 |
{BQ2515X_LDOCTRL, 0xB0}, |
| 253 |
{BQ2515X_MRCTRL, 0x2A}, |
| 254 |
{BQ2515X_ICCTRL0, 0x10}, |
| 255 |
{BQ2515X_ICCTRL1, 0x0}, |
| 256 |
{BQ2515X_ICCTRL2, 0x40}, |
| 257 |
{BQ2515X_ADCCTRL0, 0x2}, |
| 258 |
{BQ2515X_ADCCTRL1, 0x40}, |
| 259 |
{BQ2515X_ADC_COMP1_M, 0x23}, |
| 260 |
{BQ2515X_ADC_COMP1_L, 0x20}, |
| 261 |
{BQ2515X_ADC_COMP2_M, 0x38}, |
| 262 |
{BQ2515X_ADC_COMP2_L, 0x90}, |
| 263 |
{BQ2515X_ADC_COMP3_M, 0x0}, |
| 264 |
{BQ2515X_ADC_COMP3_L, 0x0}, |
| 265 |
{BQ2515X_ADC_READ_EN, 0x0}, |
| 266 |
{BQ2515X_TS_FASTCHGCTRL, 0x34}, |
| 267 |
{BQ2515X_TS_COLD, 0x7C}, |
| 268 |
{BQ2515X_TS_COOL, 0x6D}, |
| 269 |
{BQ2515X_TS_WARM, 0x38}, |
| 270 |
{BQ2515X_TS_HOT, 0x27}, |
| 271 |
{BQ2515X_DEVICE_ID, 0x35}, |
| 272 |
}; |
| 273 |
|
| 274 |
static int bq2515x_wake_up(struct bq2515x_device *bq2515x) |
| 275 |
{ |
| 276 |
int ret; |
| 277 |
int val; |
| 278 |
|
| 279 |
/* Read the STAT register if we can read it then the device is out |
| 280 |
* of ship mode. If the register cannot be read then attempt to wake |
| 281 |
* it up and enable the ADC. |
| 282 |
*/ |
| 283 |
ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &val); |
| 284 |
if (ret) |
| 285 |
return ret; |
| 286 |
|
| 287 |
/* Need to toggle LP and bring device out of ship mode. The device |
| 288 |
* will exit the ship mode when the MR pin is held low for at least |
| 289 |
* t_WAKE2 as shown in section 8.3.7.1 of the datasheet. |
| 290 |
*/ |
| 291 |
gpiod_set_value_cansleep(bq2515x->powerdown_gpio, 0); |
| 292 |
|
| 293 |
gpiod_set_value_cansleep(bq2515x->reset_gpio, 0); |
| 294 |
usleep_range(BQ2515X_TWAKE2_MIN_US, BQ2515X_TWAKE2_MAX_US); |
| 295 |
gpiod_set_value_cansleep(bq2515x->reset_gpio, 1); |
| 296 |
|
| 297 |
return regmap_write(bq2515x->regmap, BQ2515X_ADC_READ_EN, |
| 298 |
(BQ2515X_EN_VBAT_READ | BQ2515X_EN_ICHG_READ)); |
| 299 |
} |
| 300 |
|
| 301 |
static int bq2515x_update_ps_status(struct bq2515x_device *bq2515x) |
| 302 |
{ |
| 303 |
bool dc = false; |
| 304 |
unsigned int val; |
| 305 |
int ret; |
| 306 |
|
| 307 |
if (bq2515x->ac_detect_gpio) |
| 308 |
val = gpiod_get_value_cansleep(bq2515x->ac_detect_gpio); |
| 309 |
else { |
| 310 |
ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &val); |
| 311 |
if (ret) |
| 312 |
return ret; |
| 313 |
} |
| 314 |
|
| 315 |
dc = val & BQ2515X_VIN_GOOD; |
| 316 |
|
| 317 |
ret = bq2515x->mains_online != dc; |
| 318 |
|
| 319 |
bq2515x->mains_online = dc; |
| 320 |
|
| 321 |
return ret; |
| 322 |
} |
| 323 |
|
| 324 |
static int bq2515x_disable_watchdog_timers(struct bq2515x_device *bq2515x) |
| 325 |
{ |
| 326 |
int ret; |
| 327 |
|
| 328 |
ret = regmap_update_bits(bq2515x->regmap, BQ2515X_CHARGERCTRL0, |
| 329 |
BQ2515X_WATCHDOG_DISABLE, BQ2515X_WATCHDOG_DISABLE); |
| 330 |
if (ret) |
| 331 |
return ret; |
| 332 |
|
| 333 |
return regmap_update_bits(bq2515x->regmap, BQ2515X_ICCTRL2, |
| 334 |
BQ2515X_HWRESET_14S_WD, 0); |
| 335 |
} |
| 336 |
|
| 337 |
static int bq2515x_get_battery_voltage_now(struct bq2515x_device *bq2515x) |
| 338 |
{ |
| 339 |
int ret; |
| 340 |
int vbat_msb; |
| 341 |
int vbat_lsb; |
| 342 |
uint32_t vbat_measurement; |
| 343 |
|
| 344 |
if (!bq2515x->mains_online) |
| 345 |
bq2515x_wake_up(bq2515x); |
| 346 |
|
| 347 |
ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_VBAT_M, &vbat_msb); |
| 348 |
if (ret) |
| 349 |
return ret; |
| 350 |
|
| 351 |
ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_VBAT_L, &vbat_lsb); |
| 352 |
if (ret) |
| 353 |
return ret; |
| 354 |
|
| 355 |
vbat_measurement = (vbat_msb << 8) | vbat_lsb; |
| 356 |
|
| 357 |
return vbat_measurement * (BQ2515X_UV_FACTOR / BQ2515X_DIVISOR) * |
| 358 |
BQ2515X_VBAT_MULTIPLIER; |
| 359 |
} |
| 360 |
|
| 361 |
static int bq2515x_get_battery_current_now(struct bq2515x_device *bq2515x) |
| 362 |
{ |
| 363 |
int ret; |
| 364 |
int ichg_msb; |
| 365 |
int ichg_lsb; |
| 366 |
uint32_t ichg_measurement; |
| 367 |
u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA; |
| 368 |
unsigned int ichg_reg_code, reg_code; |
| 369 |
unsigned int icharge_range = 0, pchrgctrl; |
| 370 |
unsigned int buvlo, vlowv_sel, vlowv = BQ2515X_VLOWV_SEL_1B0_UV; |
| 371 |
|
| 372 |
if (!bq2515x->mains_online) |
| 373 |
return -ENODATA; |
| 374 |
|
| 375 |
ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_ICHG_M, &ichg_msb); |
| 376 |
if (ret) |
| 377 |
return ret; |
| 378 |
|
| 379 |
ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_ICHG_L, &ichg_lsb); |
| 380 |
if (ret) |
| 381 |
return ret; |
| 382 |
|
| 383 |
ichg_measurement = (ichg_msb << 8) | ichg_lsb; |
| 384 |
|
| 385 |
ret = regmap_read(bq2515x->regmap, BQ2515X_BUVLO, &buvlo); |
| 386 |
if (ret) |
| 387 |
return ret; |
| 388 |
|
| 389 |
vlowv_sel = buvlo & BQ2515X_VLOWV_SEL; |
| 390 |
|
| 391 |
if (vlowv_sel) |
| 392 |
vlowv = BQ2515X_VLOWV_SEL_1B1_UV; |
| 393 |
|
| 394 |
if (bq2515x_get_battery_voltage_now(bq2515x) < vlowv) { |
| 395 |
ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, |
| 396 |
&pchrgctrl); |
| 397 |
if (ret) |
| 398 |
return ret; |
| 399 |
|
| 400 |
reg_code = pchrgctrl & BQ2515X_PRECHARGE_MASK; |
| 401 |
} else { |
| 402 |
ret = regmap_read(bq2515x->regmap, BQ2515X_ICHG_CTRL, |
| 403 |
&ichg_reg_code); |
| 404 |
if (ret) |
| 405 |
return ret; |
| 406 |
|
| 407 |
reg_code = ichg_reg_code; |
| 408 |
} |
| 409 |
|
| 410 |
ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl); |
| 411 |
if (ret) |
| 412 |
return ret; |
| 413 |
|
| 414 |
icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE; |
| 415 |
|
| 416 |
if (icharge_range) |
| 417 |
ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA; |
| 418 |
|
| 419 |
return reg_code * (ichg_multiplier * ichg_measurement / |
| 420 |
BQ2515X_ICHG_DIVISOR); |
| 421 |
} |
| 422 |
|
| 423 |
static bool bq2515x_get_charge_disable(struct bq2515x_device *bq2515x) |
| 424 |
{ |
| 425 |
int ret; |
| 426 |
int ce_pin; |
| 427 |
int icctrl2; |
| 428 |
int charger_disable; |
| 429 |
|
| 430 |
ce_pin = gpiod_get_value_cansleep(bq2515x->ce_gpio); |
| 431 |
|
| 432 |
ret = regmap_read(bq2515x->regmap, BQ2515X_ICCTRL2, &icctrl2); |
| 433 |
if (ret) |
| 434 |
return ret; |
| 435 |
|
| 436 |
charger_disable = icctrl2 & BQ2515X_CHARGER_DISABLE; |
| 437 |
|
| 438 |
if (charger_disable || ce_pin) |
| 439 |
return true; |
| 440 |
|
| 441 |
return false; |
| 442 |
} |
| 443 |
|
| 444 |
static int bq2515x_set_charge_disable(struct bq2515x_device *bq2515x, int val) |
| 445 |
{ |
| 446 |
gpiod_set_value_cansleep(bq2515x->ce_gpio, val); |
| 447 |
|
| 448 |
return regmap_update_bits(bq2515x->regmap, BQ2515X_ICCTRL2, |
| 449 |
BQ2515X_CHARGER_DISABLE, val); |
| 450 |
} |
| 451 |
|
| 452 |
static int bq2515x_get_const_charge_current(struct bq2515x_device *bq2515x) |
| 453 |
{ |
| 454 |
int ret; |
| 455 |
u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA; |
| 456 |
unsigned int ichg_reg_code; |
| 457 |
unsigned int pchrgctrl; |
| 458 |
unsigned int icharge_range; |
| 459 |
|
| 460 |
ret = regmap_read(bq2515x->regmap, BQ2515X_ICHG_CTRL, &ichg_reg_code); |
| 461 |
if (ret) |
| 462 |
return ret; |
| 463 |
|
| 464 |
ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl); |
| 465 |
if (ret) |
| 466 |
return ret; |
| 467 |
|
| 468 |
icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE; |
| 469 |
|
| 470 |
if (icharge_range) |
| 471 |
ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA; |
| 472 |
|
| 473 |
return ichg_reg_code * ichg_multiplier; |
| 474 |
} |
| 475 |
|
| 476 |
static int bq2515x_set_const_charge_current(struct bq2515x_device *bq2515x, |
| 477 |
int val) |
| 478 |
{ |
| 479 |
int ret; |
| 480 |
unsigned int ichg_reg_code; |
| 481 |
u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA; |
| 482 |
unsigned int icharge_range = 0; |
| 483 |
|
| 484 |
if (val > BQ2515X_ICHG_MAX_UA || val < BQ2515X_ICHG_MIN_UA) |
| 485 |
return -EINVAL; |
| 486 |
|
| 487 |
if (val > BQ2515X_ICHG_CURR_STEP_THRESH_UA) { |
| 488 |
ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA; |
| 489 |
icharge_range = BQ2515X_ICHARGE_RANGE; |
| 490 |
} |
| 491 |
|
| 492 |
bq2515x_set_charge_disable(bq2515x, 1); |
| 493 |
|
| 494 |
ret = regmap_update_bits(bq2515x->regmap, BQ2515X_PCHRGCTRL, |
| 495 |
BQ2515X_ICHARGE_RANGE, icharge_range); |
| 496 |
if (ret) |
| 497 |
return ret; |
| 498 |
|
| 499 |
ichg_reg_code = val / ichg_multiplier; |
| 500 |
|
| 501 |
ret = regmap_write(bq2515x->regmap, BQ2515X_ICHG_CTRL, ichg_reg_code); |
| 502 |
if (ret) |
| 503 |
return ret; |
| 504 |
|
| 505 |
return bq2515x_set_charge_disable(bq2515x, 0); |
| 506 |
} |
| 507 |
|
| 508 |
static int bq2515x_get_precharge_current(struct bq2515x_device *bq2515x) |
| 509 |
{ |
| 510 |
int ret; |
| 511 |
unsigned int pchrgctrl; |
| 512 |
unsigned int icharge_range; |
| 513 |
u16 precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA; |
| 514 |
unsigned int precharge_reg_code; |
| 515 |
|
| 516 |
ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl); |
| 517 |
if (ret) |
| 518 |
return ret; |
| 519 |
|
| 520 |
icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE; |
| 521 |
|
| 522 |
if (icharge_range) |
| 523 |
precharge_multiplier = BQ2515X_ICHG_RNG_1B1_UA; |
| 524 |
|
| 525 |
precharge_reg_code = pchrgctrl & BQ2515X_PRECHARGE_MASK; |
| 526 |
|
| 527 |
return precharge_reg_code * precharge_multiplier; |
| 528 |
} |
| 529 |
|
| 530 |
static int bq2515x_set_precharge_current(struct bq2515x_device *bq2515x, |
| 531 |
int val) |
| 532 |
{ |
| 533 |
int ret; |
| 534 |
unsigned int pchrgctrl; |
| 535 |
unsigned int icharge_range; |
| 536 |
unsigned int precharge_reg_code; |
| 537 |
unsigned int precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA; |
| 538 |
unsigned int precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA; |
| 539 |
|
| 540 |
ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl); |
| 541 |
if (ret) |
| 542 |
return ret; |
| 543 |
|
| 544 |
icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE; |
| 545 |
|
| 546 |
if (icharge_range) { |
| 547 |
precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_3750_UA; |
| 548 |
precharge_multiplier = BQ2515X_ICHG_RNG_1B1_UA; |
| 549 |
} else { |
| 550 |
precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA; |
| 551 |
precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA; |
| 552 |
} |
| 553 |
if (val > precharge_max_ua || val < BQ2515X_ICHG_MIN_UA) |
| 554 |
return -EINVAL; |
| 555 |
|
| 556 |
precharge_reg_code = val / precharge_multiplier; |
| 557 |
|
| 558 |
ret = bq2515x_set_charge_disable(bq2515x, 1); |
| 559 |
if (ret) |
| 560 |
return ret; |
| 561 |
|
| 562 |
ret = regmap_update_bits(bq2515x->regmap, BQ2515X_PCHRGCTRL, |
| 563 |
BQ2515X_PRECHARGE_MASK, precharge_reg_code); |
| 564 |
if (ret) |
| 565 |
return ret; |
| 566 |
|
| 567 |
return bq2515x_set_charge_disable(bq2515x, 0); |
| 568 |
} |
| 569 |
|
| 570 |
static int bq2515x_charging_status(struct bq2515x_device *bq2515x, |
| 571 |
union power_supply_propval *val) |
| 572 |
{ |
| 573 |
bool status0_no_fault; |
| 574 |
bool status1_no_fault; |
| 575 |
bool ce_status; |
| 576 |
bool charge_done; |
| 577 |
unsigned int status; |
| 578 |
int ret; |
| 579 |
|
| 580 |
if (!bq2515x->mains_online) { |
| 581 |
val->intval = POWER_SUPPLY_STATUS_DISCHARGING; |
| 582 |
return 0; |
| 583 |
} |
| 584 |
|
| 585 |
ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &status); |
| 586 |
if (ret) |
| 587 |
return ret; |
| 588 |
|
| 589 |
/* |
| 590 |
* The code block below is used to determine if any faults from the |
| 591 |
* STAT0 register are disbaling charging or if the charge has completed |
| 592 |
* according to the CHARGE_DONE_STAT bit. |
| 593 |
*/ |
| 594 |
if (((status & BQ2515X_STAT0_MASK) == true) & |
| 595 |
((status & BQ2515X_CHRG_DONE) == false)) { |
| 596 |
status0_no_fault = true; |
| 597 |
charge_done = false; |
| 598 |
} else if (status & BQ2515X_CHRG_DONE) { |
| 599 |
charge_done = true; |
| 600 |
status0_no_fault = false; |
| 601 |
} else { |
| 602 |
status0_no_fault = false; |
| 603 |
charge_done = false; |
| 604 |
} |
| 605 |
|
| 606 |
ret = regmap_read(bq2515x->regmap, BQ2515X_STAT1, &status); |
| 607 |
if (ret) |
| 608 |
return ret; |
| 609 |
/* |
| 610 |
* The code block below is used to determine if any faults from the |
| 611 |
* STAT1 register are disbaling charging |
| 612 |
*/ |
| 613 |
if ((status & BQ2515X_STAT1_MASK) == false) |
| 614 |
status1_no_fault = true; |
| 615 |
else |
| 616 |
status1_no_fault = false; |
| 617 |
|
| 618 |
ce_status = (!bq2515x_get_charge_disable(bq2515x)); |
| 619 |
|
| 620 |
/* |
| 621 |
* If there are no faults and charging is enabled, then status is |
| 622 |
* charging. Otherwise, if charging is complete, then status is full. |
| 623 |
* Otherwise, if a fault exists or charging is disabled, then status is |
| 624 |
* not charging |
| 625 |
*/ |
| 626 |
if (status0_no_fault & status1_no_fault & ce_status) |
| 627 |
val->intval = POWER_SUPPLY_STATUS_CHARGING; |
| 628 |
else if (charge_done) |
| 629 |
val->intval = POWER_SUPPLY_STATUS_FULL; |
| 630 |
else if (!(status0_no_fault & status1_no_fault & ce_status)) |
| 631 |
val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; |
| 632 |
|
| 633 |
return 0; |
| 634 |
} |
| 635 |
|
| 636 |
static int bq2515x_get_batt_reg(struct bq2515x_device *bq2515x) |
| 637 |
{ |
| 638 |
int vbat_reg_code; |
| 639 |
int ret; |
| 640 |
|
| 641 |
ret = regmap_read(bq2515x->regmap, BQ2515X_VBAT_CTRL, &vbat_reg_code); |
| 642 |
if (ret) |
| 643 |
return ret; |
| 644 |
|
| 645 |
return BQ2515X_VBAT_BASE_VOLT + vbat_reg_code * BQ2515X_VBAT_STEP_UV; |
| 646 |
} |
| 647 |
|
| 648 |
static int bq2515x_set_batt_reg(struct bq2515x_device *bq2515x, int val) |
| 649 |
{ |
| 650 |
int vbat_reg_code; |
| 651 |
|
| 652 |
if (val > BQ2515X_VBAT_REG_MAX || val < BQ2515X_VBAT_REG_MIN) |
| 653 |
return -EINVAL; |
| 654 |
|
| 655 |
vbat_reg_code = (val - BQ2515X_VBAT_BASE_VOLT) / BQ2515X_VBAT_STEP_UV; |
| 656 |
|
| 657 |
return regmap_write(bq2515x->regmap, BQ2515X_VBAT_CTRL, vbat_reg_code); |
| 658 |
} |
| 659 |
|
| 660 |
static int bq2515x_get_ilim_lvl(struct bq2515x_device *bq2515x) |
| 661 |
{ |
| 662 |
int ret; |
| 663 |
int ilimctrl; |
| 664 |
|
| 665 |
ret = regmap_read(bq2515x->regmap, BQ2515X_ILIMCTRL, &ilimctrl); |
| 666 |
if (ret) |
| 667 |
return ret; |
| 668 |
|
| 669 |
return bq2515x_ilim_lvl_values[ilimctrl & BQ2515X_ILIM_MASK]; |
| 670 |
} |
| 671 |
|
| 672 |
static int bq2515x_set_ilim_lvl(struct bq2515x_device *bq2515x, int val) |
| 673 |
{ |
| 674 |
int i = 0; |
| 675 |
unsigned int array_size = ARRAY_SIZE(bq2515x_ilim_lvl_values); |
| 676 |
|
| 677 |
for (i = array_size - 1; i > 0; i--) { |
| 678 |
if (val >= bq2515x_ilim_lvl_values[i]) |
| 679 |
break; |
| 680 |
} |
| 681 |
return regmap_write(bq2515x->regmap, BQ2515X_ILIMCTRL, i); |
| 682 |
} |
| 683 |
|
| 684 |
static int bq2515x_power_supply_property_is_writeable(struct power_supply *psy, |
| 685 |
enum power_supply_property prop) |
| 686 |
{ |
| 687 |
switch (prop) { |
| 688 |
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| 689 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: |
| 690 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: |
| 691 |
case POWER_SUPPLY_PROP_PRECHARGE_CURRENT: |
| 692 |
return true; |
| 693 |
default: |
| 694 |
return false; |
| 695 |
} |
| 696 |
} |
| 697 |
|
| 698 |
static int bq2515x_charger_get_health(struct bq2515x_device *bq2515x, |
| 699 |
union power_supply_propval *val) |
| 700 |
{ |
| 701 |
int health = POWER_SUPPLY_HEALTH_GOOD; |
| 702 |
int ret; |
| 703 |
unsigned int stat1; |
| 704 |
unsigned int flag3; |
| 705 |
|
| 706 |
if (!bq2515x->mains_online) |
| 707 |
bq2515x_wake_up(bq2515x); |
| 708 |
|
| 709 |
ret = regmap_read(bq2515x->regmap, BQ2515X_FLAG3, &flag3); |
| 710 |
if (ret) |
| 711 |
return ret; |
| 712 |
|
| 713 |
ret = regmap_read(bq2515x->regmap, BQ2515X_STAT1, &stat1); |
| 714 |
if (ret) |
| 715 |
return ret; |
| 716 |
|
| 717 |
if (stat1 & BQ2515X_HEALTH_MASK) { |
| 718 |
switch (stat1 & BQ2515X_HEALTH_MASK) { |
| 719 |
case BQ2515X_TS_HOT_STAT: |
| 720 |
health = POWER_SUPPLY_HEALTH_HOT; |
| 721 |
break; |
| 722 |
case BQ2515X_TS_WARM_STAT: |
| 723 |
health = POWER_SUPPLY_HEALTH_WARM; |
| 724 |
break; |
| 725 |
case BQ2515X_TS_COOL_STAT: |
| 726 |
health = POWER_SUPPLY_HEALTH_COOL; |
| 727 |
break; |
| 728 |
case BQ2515X_TS_COLD_STAT: |
| 729 |
health = POWER_SUPPLY_HEALTH_COLD; |
| 730 |
break; |
| 731 |
default: |
| 732 |
health = POWER_SUPPLY_HEALTH_UNKNOWN; |
| 733 |
break; |
| 734 |
} |
| 735 |
} |
| 736 |
|
| 737 |
if (stat1 & BQ2515X_VIN_OVP_FAULT_STAT) |
| 738 |
health = POWER_SUPPLY_HEALTH_OVERVOLTAGE; |
| 739 |
|
| 740 |
if (flag3 & BQ2515X_SAFETY_TIMER_EXP) |
| 741 |
health = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE; |
| 742 |
|
| 743 |
val->intval = health; |
| 744 |
return 0; |
| 745 |
} |
| 746 |
|
| 747 |
static int bq2515x_mains_set_property(struct power_supply *psy, |
| 748 |
enum power_supply_property prop, |
| 749 |
const union power_supply_propval *val) |
| 750 |
{ |
| 751 |
struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy); |
| 752 |
int ret; |
| 753 |
|
| 754 |
switch (prop) { |
| 755 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: |
| 756 |
ret = bq2515x_set_batt_reg(bq2515x, val->intval); |
| 757 |
break; |
| 758 |
|
| 759 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: |
| 760 |
ret = bq2515x_set_const_charge_current(bq2515x, val->intval); |
| 761 |
break; |
| 762 |
|
| 763 |
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| 764 |
ret = bq2515x_set_ilim_lvl(bq2515x, val->intval); |
| 765 |
break; |
| 766 |
|
| 767 |
case POWER_SUPPLY_PROP_PRECHARGE_CURRENT: |
| 768 |
ret = bq2515x_set_precharge_current(bq2515x, val->intval); |
| 769 |
break; |
| 770 |
|
| 771 |
default: |
| 772 |
return -EINVAL; |
| 773 |
} |
| 774 |
|
| 775 |
return ret; |
| 776 |
} |
| 777 |
|
| 778 |
static int bq2515x_mains_get_property(struct power_supply *psy, |
| 779 |
enum power_supply_property prop, |
| 780 |
union power_supply_propval *val) |
| 781 |
{ |
| 782 |
struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy); |
| 783 |
int ret = 0; |
| 784 |
|
| 785 |
switch (prop) { |
| 786 |
|
| 787 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: |
| 788 |
ret = bq2515x_get_const_charge_current(bq2515x); |
| 789 |
if (ret < 0) |
| 790 |
return ret; |
| 791 |
|
| 792 |
val->intval = ret; |
| 793 |
break; |
| 794 |
|
| 795 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: |
| 796 |
ret = bq2515x_get_batt_reg(bq2515x); |
| 797 |
if (ret < 0) |
| 798 |
return ret; |
| 799 |
val->intval = ret; |
| 800 |
break; |
| 801 |
|
| 802 |
case POWER_SUPPLY_PROP_PRECHARGE_CURRENT: |
| 803 |
ret = bq2515x_get_precharge_current(bq2515x); |
| 804 |
if (ret < 0) |
| 805 |
return ret; |
| 806 |
val->intval = ret; |
| 807 |
break; |
| 808 |
|
| 809 |
case POWER_SUPPLY_PROP_ONLINE: |
| 810 |
val->intval = bq2515x->mains_online; |
| 811 |
break; |
| 812 |
|
| 813 |
case POWER_SUPPLY_PROP_HEALTH: |
| 814 |
ret = bq2515x_charger_get_health(bq2515x, val); |
| 815 |
if (ret) |
| 816 |
val->intval = POWER_SUPPLY_HEALTH_UNKNOWN; |
| 817 |
break; |
| 818 |
|
| 819 |
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| 820 |
ret = bq2515x_get_ilim_lvl(bq2515x); |
| 821 |
if (ret < 0) |
| 822 |
return ret; |
| 823 |
val->intval = ret; |
| 824 |
break; |
| 825 |
|
| 826 |
case POWER_SUPPLY_PROP_MODEL_NAME: |
| 827 |
val->strval = bq2515x->model_name; |
| 828 |
break; |
| 829 |
|
| 830 |
case POWER_SUPPLY_PROP_MANUFACTURER: |
| 831 |
val->strval = BQ2515X_MANUFACTURER; |
| 832 |
break; |
| 833 |
|
| 834 |
case POWER_SUPPLY_PROP_STATUS: |
| 835 |
ret = bq2515x_charging_status(bq2515x, val); |
| 836 |
if (ret) |
| 837 |
return ret; |
| 838 |
break; |
| 839 |
|
| 840 |
default: |
| 841 |
return -EINVAL; |
| 842 |
} |
| 843 |
|
| 844 |
return ret; |
| 845 |
} |
| 846 |
|
| 847 |
static int bq2515x_battery_get_property(struct power_supply *psy, |
| 848 |
enum power_supply_property prop, |
| 849 |
union power_supply_propval *val) |
| 850 |
{ |
| 851 |
struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy); |
| 852 |
int ret; |
| 853 |
|
| 854 |
ret = bq2515x_update_ps_status(bq2515x); |
| 855 |
if (ret) |
| 856 |
return ret; |
| 857 |
|
| 858 |
switch (prop) { |
| 859 |
|
| 860 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: |
| 861 |
ret = bq2515x->init_data.vbatreg; |
| 862 |
if (ret < 0) |
| 863 |
return ret; |
| 864 |
val->intval = ret; |
| 865 |
break; |
| 866 |
|
| 867 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: |
| 868 |
ret = bq2515x->init_data.ichg; |
| 869 |
if (ret < 0) |
| 870 |
return ret; |
| 871 |
val->intval = ret; |
| 872 |
break; |
| 873 |
|
| 874 |
case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| 875 |
ret = bq2515x_get_battery_voltage_now(bq2515x); |
| 876 |
if (ret < 0) |
| 877 |
return ret; |
| 878 |
val->intval = ret; |
| 879 |
break; |
| 880 |
|
| 881 |
case POWER_SUPPLY_PROP_CURRENT_NOW: |
| 882 |
ret = bq2515x_get_battery_current_now(bq2515x); |
| 883 |
if (ret < 0) |
| 884 |
return ret; |
| 885 |
val->intval = ret; |
| 886 |
break; |
| 887 |
|
| 888 |
default: |
| 889 |
return -EINVAL; |
| 890 |
} |
| 891 |
return 0; |
| 892 |
} |
| 893 |
|
| 894 |
static const enum power_supply_property bq2515x_battery_properties[] = { |
| 895 |
POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| 896 |
POWER_SUPPLY_PROP_CURRENT_NOW, |
| 897 |
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, |
| 898 |
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, |
| 899 |
}; |
| 900 |
|
| 901 |
static const enum power_supply_property bq2515x_mains_properties[] = { |
| 902 |
POWER_SUPPLY_PROP_ONLINE, |
| 903 |
POWER_SUPPLY_PROP_STATUS, |
| 904 |
POWER_SUPPLY_PROP_HEALTH, |
| 905 |
POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, |
| 906 |
POWER_SUPPLY_PROP_MODEL_NAME, |
| 907 |
POWER_SUPPLY_PROP_MANUFACTURER, |
| 908 |
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, |
| 909 |
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, |
| 910 |
POWER_SUPPLY_PROP_PRECHARGE_CURRENT, |
| 911 |
}; |
| 912 |
|
| 913 |
static const struct power_supply_desc bq2515x_mains_desc = { |
| 914 |
.name = "bq2515x-mains", |
| 915 |
.type = POWER_SUPPLY_TYPE_MAINS, |
| 916 |
.get_property = bq2515x_mains_get_property, |
| 917 |
.set_property = bq2515x_mains_set_property, |
| 918 |
.properties = bq2515x_mains_properties, |
| 919 |
.num_properties = ARRAY_SIZE(bq2515x_mains_properties), |
| 920 |
.property_is_writeable = bq2515x_power_supply_property_is_writeable, |
| 921 |
}; |
| 922 |
|
| 923 |
static const struct power_supply_desc bq2515x_battery_desc = { |
| 924 |
.name = "bq2515x-battery", |
| 925 |
.type = POWER_SUPPLY_TYPE_BATTERY, |
| 926 |
.get_property = bq2515x_battery_get_property, |
| 927 |
.properties = bq2515x_battery_properties, |
| 928 |
.num_properties = ARRAY_SIZE(bq2515x_battery_properties), |
| 929 |
.property_is_writeable = bq2515x_power_supply_property_is_writeable, |
| 930 |
}; |
| 931 |
|
| 932 |
static int bq2515x_power_supply_register(struct bq2515x_device *bq2515x, |
| 933 |
struct device *dev, struct power_supply_config psy_cfg) |
| 934 |
{ |
| 935 |
bq2515x->mains = devm_power_supply_register(bq2515x->dev, |
| 936 |
&bq2515x_mains_desc, |
| 937 |
&psy_cfg); |
| 938 |
if (IS_ERR(bq2515x->mains)) |
| 939 |
return -EINVAL; |
| 940 |
|
| 941 |
bq2515x->battery = devm_power_supply_register(bq2515x->dev, |
| 942 |
&bq2515x_battery_desc, |
| 943 |
&psy_cfg); |
| 944 |
if (IS_ERR(bq2515x->battery)) |
| 945 |
return -EINVAL; |
| 946 |
|
| 947 |
return 0; |
| 948 |
} |
| 949 |
|
| 950 |
static int bq2515x_hw_init(struct bq2515x_device *bq2515x) |
| 951 |
{ |
| 952 |
int ret; |
| 953 |
struct power_supply_battery_info *bat_info; |
| 954 |
|
| 955 |
ret = bq2515x_disable_watchdog_timers(bq2515x); |
| 956 |
if (ret) |
| 957 |
return ret; |
| 958 |
|
| 959 |
if (bq2515x->init_data.ilim) { |
| 960 |
ret = bq2515x_set_ilim_lvl(bq2515x, bq2515x->init_data.ilim); |
| 961 |
if (ret) |
| 962 |
return ret; |
| 963 |
} |
| 964 |
|
| 965 |
ret = power_supply_get_battery_info(bq2515x->mains, &bat_info); |
| 966 |
if (ret) { |
| 967 |
dev_warn(bq2515x->dev, "battery info missing, default values will be applied\n"); |
| 968 |
|
| 969 |
bq2515x->init_data.ichg = BQ2515X_DEFAULT_ICHG_UA; |
| 970 |
|
| 971 |
bq2515x->init_data.vbatreg = BQ2515X_DEFAULT_VBAT_REG_UV; |
| 972 |
|
| 973 |
bq2515x->init_data.iprechg = BQ2515X_DEFAULT_IPRECHARGE_UA; |
| 974 |
|
| 975 |
} else { |
| 976 |
bq2515x->init_data.ichg = |
| 977 |
bat_info->constant_charge_current_max_ua; |
| 978 |
|
| 979 |
bq2515x->init_data.vbatreg = |
| 980 |
bat_info->constant_charge_voltage_max_uv; |
| 981 |
|
| 982 |
bq2515x->init_data.iprechg = |
| 983 |
bat_info->precharge_current_ua; |
| 984 |
} |
| 985 |
|
| 986 |
ret = bq2515x_set_const_charge_current(bq2515x, |
| 987 |
bq2515x->init_data.ichg); |
| 988 |
if (ret) |
| 989 |
return ret; |
| 990 |
|
| 991 |
ret = bq2515x_set_batt_reg(bq2515x, bq2515x->init_data.vbatreg); |
| 992 |
if (ret) |
| 993 |
return ret; |
| 994 |
|
| 995 |
return bq2515x_set_precharge_current(bq2515x, |
| 996 |
bq2515x->init_data.iprechg); |
| 997 |
} |
| 998 |
|
| 999 |
static int bq2515x_read_properties(struct bq2515x_device *bq2515x) |
| 1000 |
{ |
| 1001 |
int ret; |
| 1002 |
|
| 1003 |
ret = device_property_read_u32(bq2515x->dev, |
| 1004 |
"input-current-limit-microamp", |
| 1005 |
&bq2515x->init_data.ilim); |
| 1006 |
if (ret) |
| 1007 |
bq2515x->init_data.ilim = bq2515x->info->ilim; |
| 1008 |
|
| 1009 |
bq2515x->ac_detect_gpio = devm_gpiod_get_optional(bq2515x->dev, |
| 1010 |
"ac-detect", GPIOD_IN); |
| 1011 |
if (IS_ERR(bq2515x->ac_detect_gpio)) { |
| 1012 |
ret = PTR_ERR(bq2515x->ac_detect_gpio); |
| 1013 |
dev_err(bq2515x->dev, "Failed to get ac detect"); |
| 1014 |
return ret; |
| 1015 |
} |
| 1016 |
|
| 1017 |
bq2515x->reset_gpio = devm_gpiod_get_optional(bq2515x->dev, |
| 1018 |
"reset", GPIOD_OUT_LOW); |
| 1019 |
if (IS_ERR(bq2515x->reset_gpio)) { |
| 1020 |
ret = PTR_ERR(bq2515x->reset_gpio); |
| 1021 |
dev_err(bq2515x->dev, "Failed to get reset"); |
| 1022 |
return ret; |
| 1023 |
} |
| 1024 |
|
| 1025 |
bq2515x->powerdown_gpio = devm_gpiod_get_optional(bq2515x->dev, |
| 1026 |
"powerdown", GPIOD_OUT_LOW); |
| 1027 |
if (IS_ERR(bq2515x->powerdown_gpio)) { |
| 1028 |
ret = PTR_ERR(bq2515x->powerdown_gpio); |
| 1029 |
dev_err(bq2515x->dev, "Failed to get powerdown"); |
| 1030 |
return ret; |
| 1031 |
} |
| 1032 |
|
| 1033 |
bq2515x->ce_gpio = devm_gpiod_get_optional(bq2515x->dev, |
| 1034 |
"charge-enable", |
| 1035 |
GPIOD_OUT_LOW); |
| 1036 |
if (IS_ERR(bq2515x->ce_gpio)) { |
| 1037 |
ret = PTR_ERR(bq2515x->ce_gpio); |
| 1038 |
dev_err(bq2515x->dev, "Failed to get ce"); |
| 1039 |
return ret; |
| 1040 |
} |
| 1041 |
|
| 1042 |
return 0; |
| 1043 |
} |
| 1044 |
|
| 1045 |
static bool bq2515x_volatile_register(struct device *dev, unsigned int reg) |
| 1046 |
{ |
| 1047 |
switch (reg) { |
| 1048 |
case BQ2515X_STAT0 ... BQ2515X_FLAG3: |
| 1049 |
case BQ2515X_ADC_VBAT_M ... BQ2515X_ADC_IIN_L: |
| 1050 |
return true; |
| 1051 |
default: |
| 1052 |
return false; |
| 1053 |
} |
| 1054 |
} |
| 1055 |
|
| 1056 |
static const struct regmap_config bq25150_regmap_config = { |
| 1057 |
.reg_bits = 8, |
| 1058 |
.val_bits = 8, |
| 1059 |
|
| 1060 |
.max_register = BQ2515X_DEVICE_ID, |
| 1061 |
.reg_defaults = bq25150_reg_defaults, |
| 1062 |
.num_reg_defaults = ARRAY_SIZE(bq25150_reg_defaults), |
| 1063 |
.cache_type = REGCACHE_MAPLE, |
| 1064 |
.volatile_reg = bq2515x_volatile_register, |
| 1065 |
}; |
| 1066 |
|
| 1067 |
static const struct regmap_config bq25155_regmap_config = { |
| 1068 |
.reg_bits = 8, |
| 1069 |
.val_bits = 8, |
| 1070 |
|
| 1071 |
.max_register = BQ2515X_DEVICE_ID, |
| 1072 |
.reg_defaults = bq25155_reg_defaults, |
| 1073 |
.num_reg_defaults = ARRAY_SIZE(bq25155_reg_defaults), |
| 1074 |
.cache_type = REGCACHE_MAPLE, |
| 1075 |
.volatile_reg = bq2515x_volatile_register, |
| 1076 |
}; |
| 1077 |
|
| 1078 |
static int bq2515x_probe(struct i2c_client *client) |
| 1079 |
{ |
| 1080 |
const struct i2c_device_id *id = i2c_client_get_device_id(client); |
| 1081 |
struct device *dev = &client->dev; |
| 1082 |
struct bq2515x_device *bq2515x; |
| 1083 |
struct power_supply_config charger_cfg = {}; |
| 1084 |
int ret; |
| 1085 |
|
| 1086 |
bq2515x = devm_kzalloc(dev, sizeof(*bq2515x), GFP_KERNEL); |
| 1087 |
if (!bq2515x) |
| 1088 |
return -ENOMEM; |
| 1089 |
|
| 1090 |
bq2515x->dev = dev; |
| 1091 |
|
| 1092 |
strscpy(bq2515x->model_name, id->name, sizeof(bq2515x->model_name)); |
| 1093 |
|
| 1094 |
bq2515x->info = i2c_get_match_data(client); |
| 1095 |
bq2515x->regmap = devm_regmap_init_i2c(client, |
| 1096 |
bq2515x->info->regmap_config); |
| 1097 |
if (IS_ERR(bq2515x->regmap)) { |
| 1098 |
dev_err(dev, "failed to allocate register map\n"); |
| 1099 |
return PTR_ERR(bq2515x->regmap); |
| 1100 |
} |
| 1101 |
|
| 1102 |
i2c_set_clientdata(client, bq2515x); |
| 1103 |
|
| 1104 |
charger_cfg.drv_data = bq2515x; |
| 1105 |
charger_cfg.fwnode = dev_fwnode(dev); |
| 1106 |
|
| 1107 |
ret = bq2515x_read_properties(bq2515x); |
| 1108 |
if (ret) { |
| 1109 |
dev_err(dev, "Failed to read device tree properties %d\n", |
| 1110 |
ret); |
| 1111 |
return ret; |
| 1112 |
} |
| 1113 |
|
| 1114 |
ret = bq2515x_power_supply_register(bq2515x, dev, charger_cfg); |
| 1115 |
if (ret) { |
| 1116 |
dev_err(dev, "failed to register power supply\n"); |
| 1117 |
return ret; |
| 1118 |
} |
| 1119 |
|
| 1120 |
ret = bq2515x_hw_init(bq2515x); |
| 1121 |
if (ret) { |
| 1122 |
dev_err(dev, "Cannot initialize the chip\n"); |
| 1123 |
return ret; |
| 1124 |
} |
| 1125 |
|
| 1126 |
return 0; |
| 1127 |
} |
| 1128 |
|
| 1129 |
static const struct bq2515x_info bq25150 = { |
| 1130 |
.regmap_config = &bq25150_regmap_config, |
| 1131 |
.ilim = BQ25150_DEFAULT_ILIM_UA, |
| 1132 |
}; |
| 1133 |
|
| 1134 |
static const struct bq2515x_info bq25155 = { |
| 1135 |
.regmap_config = &bq25155_regmap_config, |
| 1136 |
.ilim = BQ25155_DEFAULT_ILIM_UA, |
| 1137 |
}; |
| 1138 |
|
| 1139 |
static const struct i2c_device_id bq2515x_i2c_ids[] = { |
| 1140 |
{ "bq25150", (kernel_ulong_t)&bq25150 }, |
| 1141 |
{ "bq25155", (kernel_ulong_t)&bq25155 }, |
| 1142 |
{} |
| 1143 |
}; |
| 1144 |
MODULE_DEVICE_TABLE(i2c, bq2515x_i2c_ids); |
| 1145 |
|
| 1146 |
static const struct of_device_id bq2515x_of_match[] = { |
| 1147 |
{ .compatible = "ti,bq25150", .data = &bq25150 }, |
| 1148 |
{ .compatible = "ti,bq25155", .data = &bq25155 }, |
| 1149 |
{} |
| 1150 |
}; |
| 1151 |
MODULE_DEVICE_TABLE(of, bq2515x_of_match); |
| 1152 |
|
| 1153 |
static struct i2c_driver bq2515x_driver = { |
| 1154 |
.driver = { |
| 1155 |
.name = "bq2515x-charger", |
| 1156 |
.of_match_table = bq2515x_of_match, |
| 1157 |
}, |
| 1158 |
.probe = bq2515x_probe, |
| 1159 |
.id_table = bq2515x_i2c_ids, |
| 1160 |
}; |
| 1161 |
module_i2c_driver(bq2515x_driver); |
| 1162 |
|
| 1163 |
MODULE_AUTHOR("Dan Murphy <[email protected]>"); |
| 1164 |
MODULE_AUTHOR("Ricardo Rivera-Matos <[email protected]>"); |
| 1165 |
MODULE_DESCRIPTION("BQ2515X charger driver"); |
| 1166 |
MODULE_LICENSE("GPL v2"); |