| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* BQ257XX Battery Charger Driver |
| 4 |
* Copyright (C) 2025 Chris Morgan <[email protected]> |
| 5 |
*/ |
| 6 |
|
| 7 |
#include <linux/bitfield.h> |
| 8 |
#include <linux/i2c.h> |
| 9 |
#include <linux/interrupt.h> |
| 10 |
#include <linux/mfd/bq257xx.h> |
| 11 |
#include <linux/platform_device.h> |
| 12 |
#include <linux/power_supply.h> |
| 13 |
#include <linux/property.h> |
| 14 |
#include <linux/regmap.h> |
| 15 |
|
| 16 |
/* Forward declaration of driver data. */ |
| 17 |
struct bq257xx_chg; |
| 18 |
|
| 19 |
/** |
| 20 |
* struct bq257xx_chip_info - chip specific routines |
| 21 |
* @bq257xx_hw_init: init function for hw |
| 22 |
* @bq257xx_hw_shutdown: shutdown function for hw |
| 23 |
* @bq257xx_get_state: get and update state of hardware |
| 24 |
* @bq257xx_set_ichg: set maximum charge current (in uA) |
| 25 |
* @bq257xx_set_vbatreg: set maximum charge voltage (in uV) |
| 26 |
* @bq257xx_set_iindpm: set maximum input current (in uA) |
| 27 |
*/ |
| 28 |
struct bq257xx_chip_info { |
| 29 |
int (*bq257xx_hw_init)(struct bq257xx_chg *pdata); |
| 30 |
void (*bq257xx_hw_shutdown)(struct bq257xx_chg *pdata); |
| 31 |
int (*bq257xx_get_state)(struct bq257xx_chg *pdata); |
| 32 |
int (*bq257xx_set_ichg)(struct bq257xx_chg *pdata, int ichg); |
| 33 |
int (*bq257xx_set_vbatreg)(struct bq257xx_chg *pdata, int vbatreg); |
| 34 |
int (*bq257xx_set_iindpm)(struct bq257xx_chg *pdata, int iindpm); |
| 35 |
}; |
| 36 |
|
| 37 |
/** |
| 38 |
* struct bq257xx_chg - driver data for charger |
| 39 |
* @chip: hw specific functions |
| 40 |
* @bq: parent MFD device |
| 41 |
* @charger: power supply device |
| 42 |
* @online: charger input is present |
| 43 |
* @fast_charge: charger is in fast charge mode |
| 44 |
* @pre_charge: charger is in pre-charge mode |
| 45 |
* @ov_fault: charger reports over voltage fault |
| 46 |
* @batoc_fault: charger reports battery over current fault |
| 47 |
* @oc_fault: charger reports over current fault |
| 48 |
* @usb_type: USB type reported from parent power supply |
| 49 |
* @supplied: Status of parent power supply |
| 50 |
* @iindpm_max: maximum input current limit (uA) |
| 51 |
* @vbat_max: maximum charge voltage (uV) |
| 52 |
* @ichg_max: maximum charge current (uA) |
| 53 |
* @vsys_min: minimum system voltage (uV) |
| 54 |
*/ |
| 55 |
struct bq257xx_chg { |
| 56 |
const struct bq257xx_chip_info *chip; |
| 57 |
struct bq257xx_device *bq; |
| 58 |
struct power_supply *charger; |
| 59 |
bool online; |
| 60 |
bool fast_charge; |
| 61 |
bool pre_charge; |
| 62 |
bool ov_fault; |
| 63 |
bool batoc_fault; |
| 64 |
bool oc_fault; |
| 65 |
int usb_type; |
| 66 |
int supplied; |
| 67 |
u32 iindpm_max; |
| 68 |
u32 vbat_max; |
| 69 |
u32 ichg_max; |
| 70 |
u32 vsys_min; |
| 71 |
}; |
| 72 |
|
| 73 |
/** |
| 74 |
* bq25703_get_state() - Get the current state of the device |
| 75 |
* @pdata: driver platform data |
| 76 |
* |
| 77 |
* Get the current state of the charger. Check if the charger is |
| 78 |
* powered, what kind of charge state (if any) the device is in, |
| 79 |
* and if there are any active faults. |
| 80 |
* |
| 81 |
* Return: Returns 0 on success, or error on failure to read device. |
| 82 |
*/ |
| 83 |
static int bq25703_get_state(struct bq257xx_chg *pdata) |
| 84 |
{ |
| 85 |
unsigned int reg; |
| 86 |
int ret; |
| 87 |
|
| 88 |
ret = regmap_read(pdata->bq->regmap, BQ25703_CHARGER_STATUS, ®); |
| 89 |
if (ret) |
| 90 |
return ret; |
| 91 |
|
| 92 |
pdata->online = reg & BQ25703_STS_AC_STAT; |
| 93 |
pdata->fast_charge = reg & BQ25703_STS_IN_FCHRG; |
| 94 |
pdata->pre_charge = reg & BQ25703_STS_IN_PCHRG; |
| 95 |
pdata->ov_fault = reg & BQ25703_STS_FAULT_ACOV; |
| 96 |
pdata->batoc_fault = reg & BQ25703_STS_FAULT_BATOC; |
| 97 |
pdata->oc_fault = reg & BQ25703_STS_FAULT_ACOC; |
| 98 |
|
| 99 |
return 0; |
| 100 |
} |
| 101 |
|
| 102 |
/** |
| 103 |
* bq25703_get_min_vsys() - Get the minimum system voltage |
| 104 |
* @pdata: driver platform data |
| 105 |
* @intval: value for minimum voltage |
| 106 |
* |
| 107 |
* Return: Returns 0 on success or error on failure to read. |
| 108 |
*/ |
| 109 |
static int bq25703_get_min_vsys(struct bq257xx_chg *pdata, int *intval) |
| 110 |
{ |
| 111 |
unsigned int reg; |
| 112 |
int ret; |
| 113 |
|
| 114 |
ret = regmap_read(pdata->bq->regmap, BQ25703_MIN_VSYS, |
| 115 |
®); |
| 116 |
if (ret) |
| 117 |
return ret; |
| 118 |
|
| 119 |
reg = FIELD_GET(BQ25703_MINVSYS_MASK, reg); |
| 120 |
*intval = (reg * BQ25703_MINVSYS_STEP_UV) + BQ25703_MINVSYS_MIN_UV; |
| 121 |
|
| 122 |
return ret; |
| 123 |
} |
| 124 |
|
| 125 |
/** |
| 126 |
* bq25703_set_min_vsys() - Set the minimum system voltage |
| 127 |
* @pdata: driver platform data |
| 128 |
* @vsys: voltage value to set in uV. |
| 129 |
* |
| 130 |
* This function takes a requested minimum system voltage value, clamps |
| 131 |
* it between the minimum supported value by the charger and a user |
| 132 |
* defined minimum system value, and then writes the value to the |
| 133 |
* appropriate register. |
| 134 |
* |
| 135 |
* Return: Returns 0 on success or error if an error occurs. |
| 136 |
*/ |
| 137 |
static int bq25703_set_min_vsys(struct bq257xx_chg *pdata, int vsys) |
| 138 |
{ |
| 139 |
unsigned int reg; |
| 140 |
int vsys_min = pdata->vsys_min; |
| 141 |
|
| 142 |
vsys = clamp(vsys, BQ25703_MINVSYS_MIN_UV, vsys_min); |
| 143 |
reg = ((vsys - BQ25703_MINVSYS_MIN_UV) / BQ25703_MINVSYS_STEP_UV); |
| 144 |
reg = FIELD_PREP(BQ25703_MINVSYS_MASK, reg); |
| 145 |
|
| 146 |
return regmap_write(pdata->bq->regmap, BQ25703_MIN_VSYS, |
| 147 |
reg); |
| 148 |
} |
| 149 |
|
| 150 |
/** |
| 151 |
* bq25703_get_cur() - Get the reported current from the battery |
| 152 |
* @pdata: driver platform data |
| 153 |
* @intval: value of reported battery current |
| 154 |
* |
| 155 |
* Read the reported current from the battery. Since value is always |
| 156 |
* positive set sign to negative if discharging. |
| 157 |
* |
| 158 |
* Return: Returns 0 on success or error if unable to read value. |
| 159 |
*/ |
| 160 |
static int bq25703_get_cur(struct bq257xx_chg *pdata, int *intval) |
| 161 |
{ |
| 162 |
unsigned int reg; |
| 163 |
int ret; |
| 164 |
|
| 165 |
ret = regmap_read(pdata->bq->regmap, BQ25703_ADCIBAT_CHG, ®); |
| 166 |
if (ret < 0) |
| 167 |
return ret; |
| 168 |
|
| 169 |
if (pdata->online) |
| 170 |
*intval = FIELD_GET(BQ25703_ADCIBAT_CHG_MASK, reg) * |
| 171 |
BQ25703_ADCIBAT_CHG_STEP_UA; |
| 172 |
else |
| 173 |
*intval = -(FIELD_GET(BQ25703_ADCIBAT_DISCHG_MASK, reg) * |
| 174 |
BQ25703_ADCIBAT_DIS_STEP_UA); |
| 175 |
|
| 176 |
return ret; |
| 177 |
} |
| 178 |
|
| 179 |
/** |
| 180 |
* bq25703_get_ichg_cur() - Get the maximum reported charge current |
| 181 |
* @pdata: driver platform data |
| 182 |
* @intval: value of maximum reported charge current |
| 183 |
* |
| 184 |
* Get the maximum reported charge current from the battery. |
| 185 |
* |
| 186 |
* Return: Returns 0 on success or error if unable to read value. |
| 187 |
*/ |
| 188 |
static int bq25703_get_ichg_cur(struct bq257xx_chg *pdata, int *intval) |
| 189 |
{ |
| 190 |
unsigned int reg; |
| 191 |
int ret; |
| 192 |
|
| 193 |
ret = regmap_read(pdata->bq->regmap, BQ25703_CHARGE_CURRENT, ®); |
| 194 |
if (ret) |
| 195 |
return ret; |
| 196 |
|
| 197 |
*intval = FIELD_GET(BQ25703_ICHG_MASK, reg) * BQ25703_ICHG_STEP_UA; |
| 198 |
|
| 199 |
return ret; |
| 200 |
} |
| 201 |
|
| 202 |
/** |
| 203 |
* bq25703_set_ichg_cur() - Set the maximum charge current |
| 204 |
* @pdata: driver platform data |
| 205 |
* @ichg: current value to set in uA. |
| 206 |
* |
| 207 |
* This function takes a requested maximum charge current value, clamps |
| 208 |
* it between the minimum supported value by the charger and a user |
| 209 |
* defined maximum charging value, and then writes the value to the |
| 210 |
* appropriate register. |
| 211 |
* |
| 212 |
* Return: Returns 0 on success or error if an error occurs. |
| 213 |
*/ |
| 214 |
static int bq25703_set_ichg_cur(struct bq257xx_chg *pdata, int ichg) |
| 215 |
{ |
| 216 |
unsigned int reg; |
| 217 |
int ichg_max = pdata->ichg_max; |
| 218 |
|
| 219 |
ichg = clamp(ichg, BQ25703_ICHG_MIN_UA, ichg_max); |
| 220 |
reg = FIELD_PREP(BQ25703_ICHG_MASK, (ichg / BQ25703_ICHG_STEP_UA)); |
| 221 |
|
| 222 |
return regmap_write(pdata->bq->regmap, BQ25703_CHARGE_CURRENT, |
| 223 |
reg); |
| 224 |
} |
| 225 |
|
| 226 |
/** |
| 227 |
* bq25703_get_chrg_volt() - Get the maximum set charge voltage |
| 228 |
* @pdata: driver platform data |
| 229 |
* @intval: maximum charge voltage value |
| 230 |
* |
| 231 |
* Return: Returns 0 on success or error if unable to read value. |
| 232 |
*/ |
| 233 |
static int bq25703_get_chrg_volt(struct bq257xx_chg *pdata, int *intval) |
| 234 |
{ |
| 235 |
unsigned int reg; |
| 236 |
int ret; |
| 237 |
|
| 238 |
ret = regmap_read(pdata->bq->regmap, BQ25703_MAX_CHARGE_VOLT, |
| 239 |
®); |
| 240 |
if (ret) |
| 241 |
return ret; |
| 242 |
|
| 243 |
*intval = FIELD_GET(BQ25703_MAX_CHARGE_VOLT_MASK, reg) * |
| 244 |
BQ25703_VBATREG_STEP_UV; |
| 245 |
|
| 246 |
return ret; |
| 247 |
} |
| 248 |
|
| 249 |
/** |
| 250 |
* bq25703_set_chrg_volt() - Set the maximum charge voltage |
| 251 |
* @pdata: driver platform data |
| 252 |
* @vbat: voltage value to set in uV. |
| 253 |
* |
| 254 |
* This function takes a requested maximum charge voltage value, clamps |
| 255 |
* it between the minimum supported value by the charger and a user |
| 256 |
* defined maximum charging value, and then writes the value to the |
| 257 |
* appropriate register. |
| 258 |
* |
| 259 |
* Return: Returns 0 on success or error if an error occurs. |
| 260 |
*/ |
| 261 |
static int bq25703_set_chrg_volt(struct bq257xx_chg *pdata, int vbat) |
| 262 |
{ |
| 263 |
unsigned int reg; |
| 264 |
int vbat_max = pdata->vbat_max; |
| 265 |
|
| 266 |
vbat = clamp(vbat, BQ25703_VBATREG_MIN_UV, vbat_max); |
| 267 |
|
| 268 |
reg = FIELD_PREP(BQ25703_MAX_CHARGE_VOLT_MASK, |
| 269 |
(vbat / BQ25703_VBATREG_STEP_UV)); |
| 270 |
|
| 271 |
return regmap_write(pdata->bq->regmap, BQ25703_MAX_CHARGE_VOLT, |
| 272 |
reg); |
| 273 |
} |
| 274 |
|
| 275 |
/** |
| 276 |
* bq25703_get_iindpm() - Get the maximum set input current |
| 277 |
* @pdata: driver platform data |
| 278 |
* @intval: maximum input current value |
| 279 |
* |
| 280 |
* Read the actual input current limit from the device into intval. |
| 281 |
* This can differ from the value programmed due to some autonomous |
| 282 |
* functions that may be enabled (but are not currently). This is why |
| 283 |
* there is a different register used. |
| 284 |
* |
| 285 |
* Return: Returns 0 on success or error if unable to read register |
| 286 |
* value. |
| 287 |
*/ |
| 288 |
static int bq25703_get_iindpm(struct bq257xx_chg *pdata, int *intval) |
| 289 |
{ |
| 290 |
unsigned int reg; |
| 291 |
int ret; |
| 292 |
|
| 293 |
ret = regmap_read(pdata->bq->regmap, BQ25703_IIN_DPM, ®); |
| 294 |
if (ret) |
| 295 |
return ret; |
| 296 |
|
| 297 |
reg = FIELD_GET(BQ25703_IINDPM_MASK, reg); |
| 298 |
*intval = (reg * BQ25703_IINDPM_STEP_UA) + BQ25703_IINDPM_OFFSET_UA; |
| 299 |
|
| 300 |
return ret; |
| 301 |
} |
| 302 |
|
| 303 |
/** |
| 304 |
* bq25703_set_iindpm() - Set the maximum input current |
| 305 |
* @pdata: driver platform data |
| 306 |
* @iindpm: current value in uA. |
| 307 |
* |
| 308 |
* This function takes a requested maximum input current value, clamps |
| 309 |
* it between the minimum supported value by the charger and a user |
| 310 |
* defined maximum input value, and then writes the value to the |
| 311 |
* appropriate register. |
| 312 |
* |
| 313 |
* Return: Returns 0 on success or error if an error occurs. |
| 314 |
*/ |
| 315 |
static int bq25703_set_iindpm(struct bq257xx_chg *pdata, int iindpm) |
| 316 |
{ |
| 317 |
unsigned int reg; |
| 318 |
int iindpm_max = pdata->iindpm_max; |
| 319 |
|
| 320 |
iindpm = clamp(iindpm, BQ25703_IINDPM_MIN_UA, iindpm_max); |
| 321 |
|
| 322 |
reg = ((iindpm - BQ25703_IINDPM_OFFSET_UA) / BQ25703_IINDPM_STEP_UA); |
| 323 |
|
| 324 |
return regmap_write(pdata->bq->regmap, BQ25703_IIN_HOST, |
| 325 |
FIELD_PREP(BQ25703_IINDPM_MASK, reg)); |
| 326 |
} |
| 327 |
|
| 328 |
/** |
| 329 |
* bq25703_get_vbat() - Get the reported voltage from the battery |
| 330 |
* @pdata: driver platform data |
| 331 |
* @intval: value of reported battery voltage |
| 332 |
* |
| 333 |
* Read value of battery voltage into intval. |
| 334 |
* |
| 335 |
* Return: Returns 0 on success or error if unable to read value. |
| 336 |
*/ |
| 337 |
static int bq25703_get_vbat(struct bq257xx_chg *pdata, int *intval) |
| 338 |
{ |
| 339 |
unsigned int reg; |
| 340 |
int ret; |
| 341 |
|
| 342 |
ret = regmap_read(pdata->bq->regmap, BQ25703_ADCVSYSVBAT, ®); |
| 343 |
if (ret) |
| 344 |
return ret; |
| 345 |
|
| 346 |
reg = FIELD_GET(BQ25703_ADCVBAT_MASK, reg); |
| 347 |
*intval = (reg * BQ25703_ADCVSYSVBAT_STEP) + BQ25703_ADCVSYSVBAT_OFFSET_UV; |
| 348 |
|
| 349 |
return ret; |
| 350 |
} |
| 351 |
|
| 352 |
/** |
| 353 |
* bq25703_hw_init() - Set all the required registers to init the charger |
| 354 |
* @pdata: driver platform data |
| 355 |
* |
| 356 |
* Initialize the BQ25703 by first disabling the watchdog timer (which |
| 357 |
* shuts off the charger in the absence of periodic writes). Then, set |
| 358 |
* the charge current, charge voltage, minimum system voltage, and |
| 359 |
* input current limit. Disable low power mode to allow ADCs and |
| 360 |
* interrupts. Enable the ADC, start the ADC, set the ADC scale to |
| 361 |
* full, and enable each individual ADC channel. |
| 362 |
* |
| 363 |
* Return: Returns 0 on success or error code on error. |
| 364 |
*/ |
| 365 |
static int bq25703_hw_init(struct bq257xx_chg *pdata) |
| 366 |
{ |
| 367 |
struct regmap *regmap = pdata->bq->regmap; |
| 368 |
int ret = 0; |
| 369 |
|
| 370 |
regmap_update_bits(regmap, BQ25703_CHARGE_OPTION_0, |
| 371 |
BQ25703_WDTMR_ADJ_MASK, |
| 372 |
FIELD_PREP(BQ25703_WDTMR_ADJ_MASK, |
| 373 |
BQ25703_WDTMR_DISABLE)); |
| 374 |
|
| 375 |
ret = pdata->chip->bq257xx_set_ichg(pdata, pdata->ichg_max); |
| 376 |
if (ret) |
| 377 |
return ret; |
| 378 |
|
| 379 |
ret = pdata->chip->bq257xx_set_vbatreg(pdata, pdata->vbat_max); |
| 380 |
if (ret) |
| 381 |
return ret; |
| 382 |
|
| 383 |
ret = bq25703_set_min_vsys(pdata, pdata->vsys_min); |
| 384 |
if (ret) |
| 385 |
return ret; |
| 386 |
|
| 387 |
ret = pdata->chip->bq257xx_set_iindpm(pdata, pdata->iindpm_max); |
| 388 |
if (ret) |
| 389 |
return ret; |
| 390 |
|
| 391 |
/* Disable low power mode by writing 0 to the register. */ |
| 392 |
regmap_update_bits(regmap, BQ25703_CHARGE_OPTION_0, |
| 393 |
BQ25703_EN_LWPWR, 0); |
| 394 |
|
| 395 |
/* Enable the ADC. */ |
| 396 |
regmap_update_bits(regmap, BQ25703_ADC_OPTION, |
| 397 |
BQ25703_ADC_CONV_EN, BQ25703_ADC_CONV_EN); |
| 398 |
|
| 399 |
/* Start the ADC. */ |
| 400 |
regmap_update_bits(regmap, BQ25703_ADC_OPTION, |
| 401 |
BQ25703_ADC_START, BQ25703_ADC_START); |
| 402 |
|
| 403 |
/* Set the scale of the ADC. */ |
| 404 |
regmap_update_bits(regmap, BQ25703_ADC_OPTION, |
| 405 |
BQ25703_ADC_FULL_SCALE, BQ25703_ADC_FULL_SCALE); |
| 406 |
|
| 407 |
/* Enable each of the ADC channels available. */ |
| 408 |
regmap_update_bits(regmap, BQ25703_ADC_OPTION, |
| 409 |
BQ25703_ADC_CH_MASK, |
| 410 |
(BQ25703_ADC_CMPIN_EN | BQ25703_ADC_VBUS_EN | |
| 411 |
BQ25703_ADC_PSYS_EN | BQ25703_ADC_IIN_EN | |
| 412 |
BQ25703_ADC_IDCHG_EN | BQ25703_ADC_ICHG_EN | |
| 413 |
BQ25703_ADC_VSYS_EN | BQ25703_ADC_VBAT_EN)); |
| 414 |
|
| 415 |
return ret; |
| 416 |
} |
| 417 |
|
| 418 |
/** |
| 419 |
* bq25703_hw_shutdown() - Set registers for shutdown |
| 420 |
* @pdata: driver platform data |
| 421 |
* |
| 422 |
* Enable low power mode for the device while in shutdown. |
| 423 |
*/ |
| 424 |
static void bq25703_hw_shutdown(struct bq257xx_chg *pdata) |
| 425 |
{ |
| 426 |
regmap_update_bits(pdata->bq->regmap, BQ25703_CHARGE_OPTION_0, |
| 427 |
BQ25703_EN_LWPWR, BQ25703_EN_LWPWR); |
| 428 |
} |
| 429 |
|
| 430 |
static int bq257xx_set_charger_property(struct power_supply *psy, |
| 431 |
enum power_supply_property prop, |
| 432 |
const union power_supply_propval *val) |
| 433 |
{ |
| 434 |
struct bq257xx_chg *pdata = power_supply_get_drvdata(psy); |
| 435 |
|
| 436 |
switch (prop) { |
| 437 |
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| 438 |
return pdata->chip->bq257xx_set_iindpm(pdata, val->intval); |
| 439 |
|
| 440 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: |
| 441 |
return pdata->chip->bq257xx_set_vbatreg(pdata, val->intval); |
| 442 |
|
| 443 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: |
| 444 |
return pdata->chip->bq257xx_set_ichg(pdata, val->intval); |
| 445 |
|
| 446 |
default: |
| 447 |
break; |
| 448 |
} |
| 449 |
|
| 450 |
return -EINVAL; |
| 451 |
} |
| 452 |
|
| 453 |
static int bq257xx_get_charger_property(struct power_supply *psy, |
| 454 |
enum power_supply_property psp, |
| 455 |
union power_supply_propval *val) |
| 456 |
{ |
| 457 |
struct bq257xx_chg *pdata = power_supply_get_drvdata(psy); |
| 458 |
int ret = 0; |
| 459 |
|
| 460 |
ret = pdata->chip->bq257xx_get_state(pdata); |
| 461 |
if (ret) |
| 462 |
return ret; |
| 463 |
|
| 464 |
switch (psp) { |
| 465 |
case POWER_SUPPLY_PROP_STATUS: |
| 466 |
if (!pdata->online) |
| 467 |
val->intval = POWER_SUPPLY_STATUS_DISCHARGING; |
| 468 |
else if (pdata->fast_charge || pdata->pre_charge) |
| 469 |
val->intval = POWER_SUPPLY_STATUS_CHARGING; |
| 470 |
else |
| 471 |
val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; |
| 472 |
break; |
| 473 |
|
| 474 |
case POWER_SUPPLY_PROP_HEALTH: |
| 475 |
if (pdata->ov_fault || pdata->batoc_fault) |
| 476 |
val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; |
| 477 |
else if (pdata->oc_fault) |
| 478 |
val->intval = POWER_SUPPLY_HEALTH_OVERCURRENT; |
| 479 |
else |
| 480 |
val->intval = POWER_SUPPLY_HEALTH_GOOD; |
| 481 |
break; |
| 482 |
|
| 483 |
case POWER_SUPPLY_PROP_MANUFACTURER: |
| 484 |
val->strval = "Texas Instruments"; |
| 485 |
break; |
| 486 |
|
| 487 |
case POWER_SUPPLY_PROP_ONLINE: |
| 488 |
val->intval = pdata->online; |
| 489 |
break; |
| 490 |
|
| 491 |
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| 492 |
return bq25703_get_iindpm(pdata, &val->intval); |
| 493 |
|
| 494 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: |
| 495 |
return bq25703_get_chrg_volt(pdata, &val->intval); |
| 496 |
|
| 497 |
case POWER_SUPPLY_PROP_CURRENT_NOW: |
| 498 |
return bq25703_get_cur(pdata, &val->intval); |
| 499 |
|
| 500 |
case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| 501 |
return bq25703_get_vbat(pdata, &val->intval); |
| 502 |
|
| 503 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: |
| 504 |
return bq25703_get_ichg_cur(pdata, &val->intval); |
| 505 |
|
| 506 |
case POWER_SUPPLY_PROP_VOLTAGE_MIN: |
| 507 |
return bq25703_get_min_vsys(pdata, &val->intval); |
| 508 |
|
| 509 |
case POWER_SUPPLY_PROP_USB_TYPE: |
| 510 |
val->intval = pdata->usb_type; |
| 511 |
break; |
| 512 |
|
| 513 |
default: |
| 514 |
return -EINVAL; |
| 515 |
} |
| 516 |
|
| 517 |
return ret; |
| 518 |
} |
| 519 |
|
| 520 |
static enum power_supply_property bq257xx_power_supply_props[] = { |
| 521 |
POWER_SUPPLY_PROP_MANUFACTURER, |
| 522 |
POWER_SUPPLY_PROP_STATUS, |
| 523 |
POWER_SUPPLY_PROP_ONLINE, |
| 524 |
POWER_SUPPLY_PROP_HEALTH, |
| 525 |
POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, |
| 526 |
POWER_SUPPLY_PROP_CURRENT_NOW, |
| 527 |
POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| 528 |
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, |
| 529 |
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, |
| 530 |
POWER_SUPPLY_PROP_VOLTAGE_MIN, |
| 531 |
POWER_SUPPLY_PROP_USB_TYPE, |
| 532 |
}; |
| 533 |
|
| 534 |
static int bq257xx_property_is_writeable(struct power_supply *psy, |
| 535 |
enum power_supply_property prop) |
| 536 |
{ |
| 537 |
switch (prop) { |
| 538 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: |
| 539 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: |
| 540 |
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| 541 |
return true; |
| 542 |
default: |
| 543 |
return false; |
| 544 |
} |
| 545 |
} |
| 546 |
|
| 547 |
/** |
| 548 |
* bq257xx_external_power_changed() - Handler for external power change |
| 549 |
* @psy: Power supply data |
| 550 |
* |
| 551 |
* When the external power into the charger is changed, check the USB |
| 552 |
* type so that it can be reported. Additionally, update the max input |
| 553 |
* current and max charging current to the value reported if it is a |
| 554 |
* USB PD charger, otherwise use the default value. Note that each time |
| 555 |
* a charger is removed the max charge current register is erased, so |
| 556 |
* it must be set again each time the input changes or the device will |
| 557 |
* not charge. |
| 558 |
*/ |
| 559 |
static void bq257xx_external_power_changed(struct power_supply *psy) |
| 560 |
{ |
| 561 |
struct bq257xx_chg *pdata = power_supply_get_drvdata(psy); |
| 562 |
union power_supply_propval val; |
| 563 |
int ret; |
| 564 |
int imax = pdata->iindpm_max; |
| 565 |
|
| 566 |
pdata->chip->bq257xx_get_state(pdata); |
| 567 |
|
| 568 |
pdata->supplied = power_supply_am_i_supplied(pdata->charger); |
| 569 |
if (pdata->supplied < 0) |
| 570 |
return; |
| 571 |
|
| 572 |
if (pdata->supplied == 0) |
| 573 |
goto out; |
| 574 |
|
| 575 |
ret = power_supply_get_property_from_supplier(psy, |
| 576 |
POWER_SUPPLY_PROP_USB_TYPE, |
| 577 |
&val); |
| 578 |
if (ret) |
| 579 |
return; |
| 580 |
|
| 581 |
pdata->usb_type = val.intval; |
| 582 |
|
| 583 |
if ((pdata->usb_type == POWER_SUPPLY_USB_TYPE_PD) || |
| 584 |
(pdata->usb_type == POWER_SUPPLY_USB_TYPE_PD_DRP) || |
| 585 |
(pdata->usb_type == POWER_SUPPLY_USB_TYPE_PD_PPS)) { |
| 586 |
ret = power_supply_get_property_from_supplier(psy, |
| 587 |
POWER_SUPPLY_PROP_CURRENT_MAX, |
| 588 |
&val); |
| 589 |
if (ret) |
| 590 |
return; |
| 591 |
|
| 592 |
if (val.intval) |
| 593 |
imax = val.intval; |
| 594 |
} |
| 595 |
|
| 596 |
if (pdata->supplied) { |
| 597 |
pdata->chip->bq257xx_set_ichg(pdata, pdata->ichg_max); |
| 598 |
pdata->chip->bq257xx_set_iindpm(pdata, imax); |
| 599 |
pdata->chip->bq257xx_set_vbatreg(pdata, pdata->vbat_max); |
| 600 |
} |
| 601 |
|
| 602 |
out: |
| 603 |
power_supply_changed(psy); |
| 604 |
} |
| 605 |
|
| 606 |
static irqreturn_t bq257xx_irq_handler_thread(int irq, void *private) |
| 607 |
{ |
| 608 |
struct bq257xx_chg *pdata = private; |
| 609 |
|
| 610 |
bq257xx_external_power_changed(pdata->charger); |
| 611 |
return IRQ_HANDLED; |
| 612 |
} |
| 613 |
|
| 614 |
static const struct power_supply_desc bq257xx_power_supply_desc = { |
| 615 |
.name = "bq257xx-charger", |
| 616 |
.type = POWER_SUPPLY_TYPE_USB, |
| 617 |
.usb_types = BIT(POWER_SUPPLY_USB_TYPE_C) | |
| 618 |
BIT(POWER_SUPPLY_USB_TYPE_PD) | |
| 619 |
BIT(POWER_SUPPLY_USB_TYPE_PD_DRP) | |
| 620 |
BIT(POWER_SUPPLY_USB_TYPE_PD_PPS) | |
| 621 |
BIT(POWER_SUPPLY_USB_TYPE_UNKNOWN), |
| 622 |
.properties = bq257xx_power_supply_props, |
| 623 |
.num_properties = ARRAY_SIZE(bq257xx_power_supply_props), |
| 624 |
.get_property = bq257xx_get_charger_property, |
| 625 |
.set_property = bq257xx_set_charger_property, |
| 626 |
.property_is_writeable = bq257xx_property_is_writeable, |
| 627 |
.external_power_changed = bq257xx_external_power_changed, |
| 628 |
}; |
| 629 |
|
| 630 |
static const struct bq257xx_chip_info bq25703_chip_info = { |
| 631 |
.bq257xx_hw_init = &bq25703_hw_init, |
| 632 |
.bq257xx_hw_shutdown = &bq25703_hw_shutdown, |
| 633 |
.bq257xx_get_state = &bq25703_get_state, |
| 634 |
.bq257xx_set_ichg = &bq25703_set_ichg_cur, |
| 635 |
.bq257xx_set_vbatreg = &bq25703_set_chrg_volt, |
| 636 |
.bq257xx_set_iindpm = &bq25703_set_iindpm, |
| 637 |
}; |
| 638 |
|
| 639 |
/** |
| 640 |
* bq257xx_parse_dt() - Parse the device tree for required properties |
| 641 |
* @pdata: driver platform data |
| 642 |
* @psy_cfg: power supply config data |
| 643 |
* @dev: device struct |
| 644 |
* |
| 645 |
* Read the device tree to identify the minimum system voltage, the |
| 646 |
* maximum charge current, the maximum charge voltage, and the maximum |
| 647 |
* input current. |
| 648 |
* |
| 649 |
* Return: Returns 0 on success or error code on error. |
| 650 |
*/ |
| 651 |
static int bq257xx_parse_dt(struct bq257xx_chg *pdata, |
| 652 |
struct power_supply_config *psy_cfg, struct device *dev) |
| 653 |
{ |
| 654 |
struct power_supply_battery_info *bat_info; |
| 655 |
int ret; |
| 656 |
|
| 657 |
ret = power_supply_get_battery_info(pdata->charger, |
| 658 |
&bat_info); |
| 659 |
if (ret) |
| 660 |
return dev_err_probe(dev, ret, |
| 661 |
"Unable to get battery info\n"); |
| 662 |
|
| 663 |
if ((bat_info->voltage_min_design_uv <= 0) || |
| 664 |
(bat_info->constant_charge_voltage_max_uv <= 0) || |
| 665 |
(bat_info->constant_charge_current_max_ua <= 0)) |
| 666 |
return dev_err_probe(dev, -EINVAL, |
| 667 |
"Required bat info missing or invalid\n"); |
| 668 |
|
| 669 |
pdata->vsys_min = bat_info->voltage_min_design_uv; |
| 670 |
pdata->vbat_max = bat_info->constant_charge_voltage_max_uv; |
| 671 |
pdata->ichg_max = bat_info->constant_charge_current_max_ua; |
| 672 |
|
| 673 |
power_supply_put_battery_info(pdata->charger, bat_info); |
| 674 |
|
| 675 |
ret = device_property_read_u32(dev, |
| 676 |
"input-current-limit-microamp", |
| 677 |
&pdata->iindpm_max); |
| 678 |
if (ret) |
| 679 |
pdata->iindpm_max = BQ25703_IINDPM_DEFAULT_UA; |
| 680 |
|
| 681 |
return 0; |
| 682 |
} |
| 683 |
|
| 684 |
static int bq257xx_charger_probe(struct platform_device *pdev) |
| 685 |
{ |
| 686 |
struct device *dev = &pdev->dev; |
| 687 |
struct bq257xx_device *bq = dev_get_drvdata(pdev->dev.parent); |
| 688 |
struct bq257xx_chg *pdata; |
| 689 |
struct power_supply_config psy_cfg = { }; |
| 690 |
int ret; |
| 691 |
|
| 692 |
device_set_of_node_from_dev(dev, pdev->dev.parent); |
| 693 |
|
| 694 |
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); |
| 695 |
if (!pdata) |
| 696 |
return -ENOMEM; |
| 697 |
|
| 698 |
pdata->bq = bq; |
| 699 |
pdata->chip = &bq25703_chip_info; |
| 700 |
|
| 701 |
platform_set_drvdata(pdev, pdata); |
| 702 |
|
| 703 |
psy_cfg.drv_data = pdata; |
| 704 |
psy_cfg.fwnode = dev_fwnode(dev); |
| 705 |
|
| 706 |
pdata->charger = devm_power_supply_register(dev, |
| 707 |
&bq257xx_power_supply_desc, |
| 708 |
&psy_cfg); |
| 709 |
if (IS_ERR(pdata->charger)) |
| 710 |
return dev_err_probe(dev, PTR_ERR(pdata->charger), |
| 711 |
"Power supply register charger failed\n"); |
| 712 |
|
| 713 |
ret = bq257xx_parse_dt(pdata, &psy_cfg, dev); |
| 714 |
if (ret) |
| 715 |
return ret; |
| 716 |
|
| 717 |
ret = pdata->chip->bq257xx_hw_init(pdata); |
| 718 |
if (ret) |
| 719 |
return dev_err_probe(dev, ret, "Cannot initialize the charger\n"); |
| 720 |
|
| 721 |
platform_set_drvdata(pdev, pdata); |
| 722 |
|
| 723 |
if (bq->client->irq) { |
| 724 |
ret = devm_request_threaded_irq(dev, bq->client->irq, NULL, |
| 725 |
bq257xx_irq_handler_thread, |
| 726 |
IRQF_TRIGGER_RISING | |
| 727 |
IRQF_TRIGGER_FALLING | |
| 728 |
IRQF_ONESHOT, |
| 729 |
dev_name(&bq->client->dev), pdata); |
| 730 |
if (ret < 0) |
| 731 |
dev_err_probe(dev, ret, "Charger get irq failed\n"); |
| 732 |
} |
| 733 |
|
| 734 |
return ret; |
| 735 |
} |
| 736 |
|
| 737 |
static void bq257xx_charger_shutdown(struct platform_device *pdev) |
| 738 |
{ |
| 739 |
struct bq257xx_chg *pdata = platform_get_drvdata(pdev); |
| 740 |
|
| 741 |
pdata->chip->bq257xx_hw_shutdown(pdata); |
| 742 |
} |
| 743 |
|
| 744 |
static struct platform_driver bq257xx_chg_driver = { |
| 745 |
.driver = { |
| 746 |
.name = "bq257xx-charger", |
| 747 |
}, |
| 748 |
.probe = bq257xx_charger_probe, |
| 749 |
.shutdown = bq257xx_charger_shutdown, |
| 750 |
}; |
| 751 |
module_platform_driver(bq257xx_chg_driver); |
| 752 |
|
| 753 |
MODULE_DESCRIPTION("bq257xx charger driver"); |
| 754 |
MODULE_AUTHOR("Chris Morgan <[email protected]>"); |
| 755 |
MODULE_LICENSE("GPL"); |