| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Battery driver for the Ingenic JZ47xx SoCs |
| 4 |
* Copyright (c) 2019 Artur Rojek <[email protected]> |
| 5 |
* |
| 6 |
* based on drivers/power/supply/jz4740-battery.c |
| 7 |
*/ |
| 8 |
|
| 9 |
#include <linux/iio/consumer.h> |
| 10 |
#include <linux/module.h> |
| 11 |
#include <linux/of.h> |
| 12 |
#include <linux/platform_device.h> |
| 13 |
#include <linux/power_supply.h> |
| 14 |
#include <linux/property.h> |
| 15 |
|
| 16 |
struct ingenic_battery { |
| 17 |
struct device *dev; |
| 18 |
struct iio_channel *channel; |
| 19 |
struct power_supply_desc desc; |
| 20 |
struct power_supply *battery; |
| 21 |
struct power_supply_battery_info *info; |
| 22 |
}; |
| 23 |
|
| 24 |
static int ingenic_battery_get_property(struct power_supply *psy, |
| 25 |
enum power_supply_property psp, |
| 26 |
union power_supply_propval *val) |
| 27 |
{ |
| 28 |
struct ingenic_battery *bat = power_supply_get_drvdata(psy); |
| 29 |
struct power_supply_battery_info *info = bat->info; |
| 30 |
int ret; |
| 31 |
|
| 32 |
switch (psp) { |
| 33 |
case POWER_SUPPLY_PROP_HEALTH: |
| 34 |
ret = iio_read_channel_processed_scale(bat->channel, |
| 35 |
&val->intval, |
| 36 |
1000); |
| 37 |
if (val->intval < info->voltage_min_design_uv) |
| 38 |
val->intval = POWER_SUPPLY_HEALTH_DEAD; |
| 39 |
else if (val->intval > info->voltage_max_design_uv) |
| 40 |
val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; |
| 41 |
else |
| 42 |
val->intval = POWER_SUPPLY_HEALTH_GOOD; |
| 43 |
return ret; |
| 44 |
case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| 45 |
ret = iio_read_channel_processed_scale(bat->channel, |
| 46 |
&val->intval, |
| 47 |
1000); |
| 48 |
return ret; |
| 49 |
case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: |
| 50 |
val->intval = info->voltage_min_design_uv; |
| 51 |
return 0; |
| 52 |
case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: |
| 53 |
val->intval = info->voltage_max_design_uv; |
| 54 |
return 0; |
| 55 |
default: |
| 56 |
return -EINVAL; |
| 57 |
} |
| 58 |
} |
| 59 |
|
| 60 |
/* Set the most appropriate IIO channel voltage reference scale |
| 61 |
* based on the battery's max voltage. |
| 62 |
*/ |
| 63 |
static int ingenic_battery_set_scale(struct ingenic_battery *bat) |
| 64 |
{ |
| 65 |
const int *scale_raw; |
| 66 |
int scale_len, scale_type, best_idx = -1, best_mV, max_raw, i, ret; |
| 67 |
u64 max_mV; |
| 68 |
|
| 69 |
ret = iio_read_max_channel_raw(bat->channel, &max_raw); |
| 70 |
if (ret) { |
| 71 |
dev_err(bat->dev, "Unable to read max raw channel value\n"); |
| 72 |
return ret; |
| 73 |
} |
| 74 |
|
| 75 |
ret = iio_read_avail_channel_attribute(bat->channel, &scale_raw, |
| 76 |
&scale_type, &scale_len, |
| 77 |
IIO_CHAN_INFO_SCALE); |
| 78 |
if (ret < 0) { |
| 79 |
dev_err(bat->dev, "Unable to read channel avail scale\n"); |
| 80 |
return ret; |
| 81 |
} |
| 82 |
if (ret != IIO_AVAIL_LIST || scale_type != IIO_VAL_FRACTIONAL_LOG2) |
| 83 |
return -EINVAL; |
| 84 |
|
| 85 |
max_mV = bat->info->voltage_max_design_uv / 1000; |
| 86 |
|
| 87 |
for (i = 0; i < scale_len; i += 2) { |
| 88 |
u64 scale_mV = (max_raw * scale_raw[i]) >> scale_raw[i + 1]; |
| 89 |
|
| 90 |
if (scale_mV < max_mV) |
| 91 |
continue; |
| 92 |
|
| 93 |
if (best_idx >= 0 && scale_mV > best_mV) |
| 94 |
continue; |
| 95 |
|
| 96 |
best_mV = scale_mV; |
| 97 |
best_idx = i; |
| 98 |
} |
| 99 |
|
| 100 |
if (best_idx < 0) { |
| 101 |
dev_err(bat->dev, "Unable to find matching voltage scale\n"); |
| 102 |
return -EINVAL; |
| 103 |
} |
| 104 |
|
| 105 |
/* Only set scale if there is more than one (fractional) entry */ |
| 106 |
if (scale_len > 2) { |
| 107 |
ret = iio_write_channel_attribute(bat->channel, |
| 108 |
scale_raw[best_idx], |
| 109 |
scale_raw[best_idx + 1], |
| 110 |
IIO_CHAN_INFO_SCALE); |
| 111 |
if (ret) |
| 112 |
return ret; |
| 113 |
} |
| 114 |
|
| 115 |
return 0; |
| 116 |
} |
| 117 |
|
| 118 |
static enum power_supply_property ingenic_battery_properties[] = { |
| 119 |
POWER_SUPPLY_PROP_HEALTH, |
| 120 |
POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| 121 |
POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, |
| 122 |
POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, |
| 123 |
}; |
| 124 |
|
| 125 |
static int ingenic_battery_probe(struct platform_device *pdev) |
| 126 |
{ |
| 127 |
struct device *dev = &pdev->dev; |
| 128 |
struct ingenic_battery *bat; |
| 129 |
struct power_supply_config psy_cfg = {}; |
| 130 |
struct power_supply_desc *desc; |
| 131 |
int ret; |
| 132 |
|
| 133 |
bat = devm_kzalloc(dev, sizeof(*bat), GFP_KERNEL); |
| 134 |
if (!bat) |
| 135 |
return -ENOMEM; |
| 136 |
|
| 137 |
bat->dev = dev; |
| 138 |
bat->channel = devm_iio_channel_get(dev, "battery"); |
| 139 |
if (IS_ERR(bat->channel)) |
| 140 |
return PTR_ERR(bat->channel); |
| 141 |
|
| 142 |
desc = &bat->desc; |
| 143 |
desc->name = "jz-battery"; |
| 144 |
desc->type = POWER_SUPPLY_TYPE_BATTERY; |
| 145 |
desc->properties = ingenic_battery_properties; |
| 146 |
desc->num_properties = ARRAY_SIZE(ingenic_battery_properties); |
| 147 |
desc->get_property = ingenic_battery_get_property; |
| 148 |
psy_cfg.drv_data = bat; |
| 149 |
psy_cfg.fwnode = dev_fwnode(dev); |
| 150 |
|
| 151 |
bat->battery = devm_power_supply_register(dev, desc, &psy_cfg); |
| 152 |
if (IS_ERR(bat->battery)) |
| 153 |
return dev_err_probe(dev, PTR_ERR(bat->battery), |
| 154 |
"Unable to register battery\n"); |
| 155 |
|
| 156 |
ret = power_supply_get_battery_info(bat->battery, &bat->info); |
| 157 |
if (ret) { |
| 158 |
dev_err(dev, "Unable to get battery info: %d\n", ret); |
| 159 |
return ret; |
| 160 |
} |
| 161 |
if (bat->info->voltage_min_design_uv < 0) { |
| 162 |
dev_err(dev, "Unable to get voltage min design\n"); |
| 163 |
return bat->info->voltage_min_design_uv; |
| 164 |
} |
| 165 |
if (bat->info->voltage_max_design_uv < 0) { |
| 166 |
dev_err(dev, "Unable to get voltage max design\n"); |
| 167 |
return bat->info->voltage_max_design_uv; |
| 168 |
} |
| 169 |
|
| 170 |
return ingenic_battery_set_scale(bat); |
| 171 |
} |
| 172 |
|
| 173 |
#ifdef CONFIG_OF |
| 174 |
static const struct of_device_id ingenic_battery_of_match[] = { |
| 175 |
{ .compatible = "ingenic,jz4740-battery", }, |
| 176 |
{ }, |
| 177 |
}; |
| 178 |
MODULE_DEVICE_TABLE(of, ingenic_battery_of_match); |
| 179 |
#endif |
| 180 |
|
| 181 |
static struct platform_driver ingenic_battery_driver = { |
| 182 |
.driver = { |
| 183 |
.name = "ingenic-battery", |
| 184 |
.of_match_table = of_match_ptr(ingenic_battery_of_match), |
| 185 |
}, |
| 186 |
.probe = ingenic_battery_probe, |
| 187 |
}; |
| 188 |
module_platform_driver(ingenic_battery_driver); |
| 189 |
|
| 190 |
MODULE_DESCRIPTION("Battery driver for Ingenic JZ47xx SoCs"); |
| 191 |
MODULE_AUTHOR("Artur Rojek <[email protected]>"); |
| 192 |
MODULE_LICENSE("GPL"); |