| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* AXP20x PMIC USB power supply status driver |
| 4 |
* |
| 5 |
* Copyright (C) 2015 Hans de Goede <[email protected]> |
| 6 |
* Copyright (C) 2014 Bruno Prémont <[email protected]> |
| 7 |
*/ |
| 8 |
|
| 9 |
#include <linux/bitops.h> |
| 10 |
#include <linux/device.h> |
| 11 |
#include <linux/devm-helpers.h> |
| 12 |
#include <linux/init.h> |
| 13 |
#include <linux/interrupt.h> |
| 14 |
#include <linux/kernel.h> |
| 15 |
#include <linux/mfd/axp20x.h> |
| 16 |
#include <linux/module.h> |
| 17 |
#include <linux/of.h> |
| 18 |
#include <linux/platform_device.h> |
| 19 |
#include <linux/pm.h> |
| 20 |
#include <linux/power_supply.h> |
| 21 |
#include <linux/regmap.h> |
| 22 |
#include <linux/slab.h> |
| 23 |
#include <linux/iio/consumer.h> |
| 24 |
#include <linux/workqueue.h> |
| 25 |
|
| 26 |
#define DRVNAME "axp20x-usb-power-supply" |
| 27 |
|
| 28 |
#define AXP192_USB_OTG_STATUS 0x04 |
| 29 |
|
| 30 |
#define AXP20X_PWR_STATUS_VBUS_PRESENT BIT(5) |
| 31 |
#define AXP20X_PWR_STATUS_VBUS_USED BIT(4) |
| 32 |
|
| 33 |
#define AXP717_PWR_STATUS_VBUS_GOOD BIT(5) |
| 34 |
|
| 35 |
#define AXP20X_USB_STATUS_VBUS_VALID BIT(2) |
| 36 |
|
| 37 |
#define AXP717_PMU_FAULT_VBUS BIT(5) |
| 38 |
#define AXP717_PMU_FAULT_VSYS BIT(3) |
| 39 |
|
| 40 |
#define AXP20X_VBUS_VHOLD_uV(b) (4000000 + (((b) >> 3) & 7) * 100000) |
| 41 |
#define AXP20X_VBUS_VHOLD_MASK GENMASK(5, 3) |
| 42 |
#define AXP20X_VBUS_VHOLD_OFFSET 3 |
| 43 |
|
| 44 |
#define AXP20X_ADC_EN1_VBUS_CURR BIT(2) |
| 45 |
#define AXP20X_ADC_EN1_VBUS_VOLT BIT(3) |
| 46 |
|
| 47 |
#define AXP717_INPUT_VOL_LIMIT_MASK GENMASK(3, 0) |
| 48 |
#define AXP717_INPUT_CUR_LIMIT_MASK GENMASK(5, 0) |
| 49 |
#define AXP717_ADC_DATA_MASK GENMASK(14, 0) |
| 50 |
|
| 51 |
#define AXP717_ADC_EN_VBUS_VOLT BIT(2) |
| 52 |
|
| 53 |
/* |
| 54 |
* Note do not raise the debounce time, we must report Vusb high within |
| 55 |
* 100ms otherwise we get Vbus errors in musb. |
| 56 |
*/ |
| 57 |
#define DEBOUNCE_TIME msecs_to_jiffies(50) |
| 58 |
|
| 59 |
struct axp20x_usb_power; |
| 60 |
|
| 61 |
struct axp_data { |
| 62 |
const struct power_supply_desc *power_desc; |
| 63 |
const char * const *irq_names; |
| 64 |
unsigned int num_irq_names; |
| 65 |
const int *curr_lim_table; |
| 66 |
int curr_lim_table_size; |
| 67 |
struct reg_field curr_lim_fld; |
| 68 |
struct reg_field vbus_valid_bit; |
| 69 |
struct reg_field vbus_mon_bit; |
| 70 |
struct reg_field usb_bc_en_bit; |
| 71 |
struct reg_field usb_bc_det_fld; |
| 72 |
struct reg_field vbus_disable_bit; |
| 73 |
bool vbus_needs_polling: 1; |
| 74 |
void (*axp20x_read_vbus)(struct work_struct *work); |
| 75 |
int (*axp20x_cfg_iio_chan)(struct platform_device *pdev, |
| 76 |
struct axp20x_usb_power *power); |
| 77 |
int (*axp20x_cfg_adc_reg)(struct axp20x_usb_power *power); |
| 78 |
}; |
| 79 |
|
| 80 |
struct axp20x_usb_power { |
| 81 |
struct device *dev; |
| 82 |
struct regmap *regmap; |
| 83 |
struct regmap_field *curr_lim_fld; |
| 84 |
struct regmap_field *vbus_valid_bit; |
| 85 |
struct regmap_field *vbus_mon_bit; |
| 86 |
struct regmap_field *usb_bc_en_bit; |
| 87 |
struct regmap_field *usb_bc_det_fld; |
| 88 |
struct regmap_field *vbus_disable_bit; |
| 89 |
struct power_supply *supply; |
| 90 |
const struct axp_data *axp_data; |
| 91 |
struct iio_channel *vbus_v; |
| 92 |
struct iio_channel *vbus_i; |
| 93 |
struct delayed_work vbus_detect; |
| 94 |
int max_input_cur; |
| 95 |
unsigned int old_status; |
| 96 |
unsigned int online; |
| 97 |
unsigned int num_irqs; |
| 98 |
unsigned int irqs[] __counted_by(num_irqs); |
| 99 |
}; |
| 100 |
|
| 101 |
static bool axp20x_usb_vbus_needs_polling(struct axp20x_usb_power *power) |
| 102 |
{ |
| 103 |
/* |
| 104 |
* Polling is only necessary while VBUS is offline. While online, a |
| 105 |
* present->absent transition implies an online->offline transition |
| 106 |
* and will trigger the VBUS_REMOVAL IRQ. |
| 107 |
*/ |
| 108 |
if (power->axp_data->vbus_needs_polling && !power->online) |
| 109 |
return true; |
| 110 |
|
| 111 |
return false; |
| 112 |
} |
| 113 |
|
| 114 |
static irqreturn_t axp20x_usb_power_irq(int irq, void *devid) |
| 115 |
{ |
| 116 |
struct axp20x_usb_power *power = devid; |
| 117 |
|
| 118 |
power_supply_changed(power->supply); |
| 119 |
|
| 120 |
mod_delayed_work(system_power_efficient_wq, &power->vbus_detect, DEBOUNCE_TIME); |
| 121 |
|
| 122 |
return IRQ_HANDLED; |
| 123 |
} |
| 124 |
|
| 125 |
static void axp20x_usb_power_poll_vbus(struct work_struct *work) |
| 126 |
{ |
| 127 |
struct axp20x_usb_power *power = |
| 128 |
container_of(work, struct axp20x_usb_power, vbus_detect.work); |
| 129 |
unsigned int val; |
| 130 |
int ret; |
| 131 |
|
| 132 |
ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, &val); |
| 133 |
if (ret) |
| 134 |
goto out; |
| 135 |
|
| 136 |
val &= (AXP20X_PWR_STATUS_VBUS_PRESENT | AXP20X_PWR_STATUS_VBUS_USED); |
| 137 |
if (val != power->old_status) |
| 138 |
power_supply_changed(power->supply); |
| 139 |
|
| 140 |
if (power->usb_bc_en_bit && (val & AXP20X_PWR_STATUS_VBUS_PRESENT) != |
| 141 |
(power->old_status & AXP20X_PWR_STATUS_VBUS_PRESENT)) { |
| 142 |
dev_dbg(power->dev, "Cable status changed, re-enabling USB BC"); |
| 143 |
ret = regmap_field_write(power->usb_bc_en_bit, 1); |
| 144 |
if (ret) |
| 145 |
dev_err(power->dev, "failed to enable USB BC: errno %d", |
| 146 |
ret); |
| 147 |
} |
| 148 |
|
| 149 |
power->old_status = val; |
| 150 |
power->online = val & AXP20X_PWR_STATUS_VBUS_USED; |
| 151 |
|
| 152 |
out: |
| 153 |
if (axp20x_usb_vbus_needs_polling(power)) |
| 154 |
mod_delayed_work(system_power_efficient_wq, &power->vbus_detect, DEBOUNCE_TIME); |
| 155 |
} |
| 156 |
|
| 157 |
static void axp717_usb_power_poll_vbus(struct work_struct *work) |
| 158 |
{ |
| 159 |
struct axp20x_usb_power *power = |
| 160 |
container_of(work, struct axp20x_usb_power, vbus_detect.work); |
| 161 |
unsigned int val; |
| 162 |
int ret; |
| 163 |
|
| 164 |
ret = regmap_read(power->regmap, AXP717_ON_INDICATE, &val); |
| 165 |
if (ret) |
| 166 |
return; |
| 167 |
|
| 168 |
val &= AXP717_PWR_STATUS_VBUS_GOOD; |
| 169 |
if (val != power->old_status) |
| 170 |
power_supply_changed(power->supply); |
| 171 |
|
| 172 |
power->old_status = val; |
| 173 |
} |
| 174 |
|
| 175 |
static int axp20x_get_usb_type(struct axp20x_usb_power *power, |
| 176 |
union power_supply_propval *val) |
| 177 |
{ |
| 178 |
unsigned int reg; |
| 179 |
int ret; |
| 180 |
|
| 181 |
if (!power->usb_bc_det_fld) |
| 182 |
return -EINVAL; |
| 183 |
|
| 184 |
ret = regmap_field_read(power->usb_bc_det_fld, ®); |
| 185 |
if (ret) |
| 186 |
return ret; |
| 187 |
|
| 188 |
switch (reg) { |
| 189 |
case 1: |
| 190 |
val->intval = POWER_SUPPLY_USB_TYPE_SDP; |
| 191 |
break; |
| 192 |
case 2: |
| 193 |
val->intval = POWER_SUPPLY_USB_TYPE_CDP; |
| 194 |
break; |
| 195 |
case 3: |
| 196 |
val->intval = POWER_SUPPLY_USB_TYPE_DCP; |
| 197 |
break; |
| 198 |
default: |
| 199 |
val->intval = POWER_SUPPLY_USB_TYPE_UNKNOWN; |
| 200 |
break; |
| 201 |
} |
| 202 |
|
| 203 |
return 0; |
| 204 |
} |
| 205 |
|
| 206 |
static int axp20x_usb_power_get_property(struct power_supply *psy, |
| 207 |
enum power_supply_property psp, union power_supply_propval *val) |
| 208 |
{ |
| 209 |
struct axp20x_usb_power *power = power_supply_get_drvdata(psy); |
| 210 |
unsigned int input, v; |
| 211 |
int ret; |
| 212 |
|
| 213 |
switch (psp) { |
| 214 |
case POWER_SUPPLY_PROP_VOLTAGE_MIN: |
| 215 |
ret = regmap_read(power->regmap, AXP20X_VBUS_IPSOUT_MGMT, &v); |
| 216 |
if (ret) |
| 217 |
return ret; |
| 218 |
|
| 219 |
val->intval = AXP20X_VBUS_VHOLD_uV(v); |
| 220 |
return 0; |
| 221 |
case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| 222 |
if (IS_ENABLED(CONFIG_AXP20X_ADC)) { |
| 223 |
/* |
| 224 |
* IIO framework gives mV but Power Supply framework |
| 225 |
* gives uV. |
| 226 |
*/ |
| 227 |
ret = iio_read_channel_processed_scale(power->vbus_v, |
| 228 |
&val->intval, 1000); |
| 229 |
if (ret) |
| 230 |
return ret; |
| 231 |
|
| 232 |
return 0; |
| 233 |
} |
| 234 |
|
| 235 |
ret = axp20x_read_variable_width(power->regmap, |
| 236 |
AXP20X_VBUS_V_ADC_H, 12); |
| 237 |
if (ret < 0) |
| 238 |
return ret; |
| 239 |
|
| 240 |
val->intval = ret * 1700; /* 1 step = 1.7 mV */ |
| 241 |
return 0; |
| 242 |
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| 243 |
ret = regmap_field_read(power->curr_lim_fld, &v); |
| 244 |
if (ret) |
| 245 |
return ret; |
| 246 |
|
| 247 |
if (v < power->axp_data->curr_lim_table_size) |
| 248 |
val->intval = power->axp_data->curr_lim_table[v]; |
| 249 |
else |
| 250 |
val->intval = power->axp_data->curr_lim_table[ |
| 251 |
power->axp_data->curr_lim_table_size - 1]; |
| 252 |
return 0; |
| 253 |
case POWER_SUPPLY_PROP_CURRENT_NOW: |
| 254 |
if (IS_ENABLED(CONFIG_AXP20X_ADC)) { |
| 255 |
/* |
| 256 |
* IIO framework gives mA but Power Supply framework |
| 257 |
* gives uA. |
| 258 |
*/ |
| 259 |
ret = iio_read_channel_processed_scale(power->vbus_i, |
| 260 |
&val->intval, 1000); |
| 261 |
if (ret) |
| 262 |
return ret; |
| 263 |
|
| 264 |
return 0; |
| 265 |
} |
| 266 |
|
| 267 |
ret = axp20x_read_variable_width(power->regmap, |
| 268 |
AXP20X_VBUS_I_ADC_H, 12); |
| 269 |
if (ret < 0) |
| 270 |
return ret; |
| 271 |
|
| 272 |
val->intval = ret * 375; /* 1 step = 0.375 mA */ |
| 273 |
return 0; |
| 274 |
|
| 275 |
case POWER_SUPPLY_PROP_USB_TYPE: |
| 276 |
return axp20x_get_usb_type(power, val); |
| 277 |
default: |
| 278 |
break; |
| 279 |
} |
| 280 |
|
| 281 |
/* All the properties below need the input-status reg value */ |
| 282 |
ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, &input); |
| 283 |
if (ret) |
| 284 |
return ret; |
| 285 |
|
| 286 |
switch (psp) { |
| 287 |
case POWER_SUPPLY_PROP_HEALTH: |
| 288 |
if (!(input & AXP20X_PWR_STATUS_VBUS_PRESENT)) { |
| 289 |
val->intval = POWER_SUPPLY_HEALTH_UNKNOWN; |
| 290 |
break; |
| 291 |
} |
| 292 |
|
| 293 |
val->intval = POWER_SUPPLY_HEALTH_GOOD; |
| 294 |
|
| 295 |
if (power->vbus_valid_bit) { |
| 296 |
ret = regmap_field_read(power->vbus_valid_bit, &v); |
| 297 |
if (ret) |
| 298 |
return ret; |
| 299 |
|
| 300 |
if (v == 0) |
| 301 |
val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; |
| 302 |
} |
| 303 |
|
| 304 |
break; |
| 305 |
case POWER_SUPPLY_PROP_PRESENT: |
| 306 |
val->intval = !!(input & AXP20X_PWR_STATUS_VBUS_PRESENT); |
| 307 |
break; |
| 308 |
case POWER_SUPPLY_PROP_ONLINE: |
| 309 |
val->intval = !!(input & AXP20X_PWR_STATUS_VBUS_USED); |
| 310 |
break; |
| 311 |
default: |
| 312 |
return -EINVAL; |
| 313 |
} |
| 314 |
|
| 315 |
return 0; |
| 316 |
} |
| 317 |
|
| 318 |
static int axp717_usb_power_get_property(struct power_supply *psy, |
| 319 |
enum power_supply_property psp, union power_supply_propval *val) |
| 320 |
{ |
| 321 |
struct axp20x_usb_power *power = power_supply_get_drvdata(psy); |
| 322 |
unsigned int v; |
| 323 |
int ret; |
| 324 |
|
| 325 |
switch (psp) { |
| 326 |
case POWER_SUPPLY_PROP_HEALTH: |
| 327 |
val->intval = POWER_SUPPLY_HEALTH_GOOD; |
| 328 |
ret = regmap_read(power->regmap, AXP717_ON_INDICATE, &v); |
| 329 |
if (ret) |
| 330 |
return ret; |
| 331 |
|
| 332 |
if (!(v & AXP717_PWR_STATUS_VBUS_GOOD)) |
| 333 |
val->intval = POWER_SUPPLY_HEALTH_UNKNOWN; |
| 334 |
|
| 335 |
ret = regmap_read(power->regmap, AXP717_PMU_FAULT_VBUS, &v); |
| 336 |
if (ret) |
| 337 |
return ret; |
| 338 |
|
| 339 |
v &= (AXP717_PMU_FAULT_VBUS | AXP717_PMU_FAULT_VSYS); |
| 340 |
if (v) { |
| 341 |
val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; |
| 342 |
regmap_write(power->regmap, AXP717_PMU_FAULT_VBUS, v); |
| 343 |
} |
| 344 |
|
| 345 |
break; |
| 346 |
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| 347 |
ret = regmap_read(power->regmap, AXP717_INPUT_CUR_LIMIT_CTRL, &v); |
| 348 |
if (ret) |
| 349 |
return ret; |
| 350 |
|
| 351 |
/* 50ma step size with 100ma offset. */ |
| 352 |
v &= AXP717_INPUT_CUR_LIMIT_MASK; |
| 353 |
val->intval = (v * 50000) + 100000; |
| 354 |
break; |
| 355 |
case POWER_SUPPLY_PROP_ONLINE: |
| 356 |
case POWER_SUPPLY_PROP_PRESENT: |
| 357 |
ret = regmap_read(power->regmap, AXP717_ON_INDICATE, &v); |
| 358 |
if (ret) |
| 359 |
return ret; |
| 360 |
val->intval = !!(v & AXP717_PWR_STATUS_VBUS_GOOD); |
| 361 |
break; |
| 362 |
case POWER_SUPPLY_PROP_USB_TYPE: |
| 363 |
return axp20x_get_usb_type(power, val); |
| 364 |
case POWER_SUPPLY_PROP_VOLTAGE_MIN: |
| 365 |
ret = regmap_read(power->regmap, AXP717_INPUT_VOL_LIMIT_CTRL, &v); |
| 366 |
if (ret) |
| 367 |
return ret; |
| 368 |
|
| 369 |
/* 80mv step size with 3.88v offset. */ |
| 370 |
v &= AXP717_INPUT_VOL_LIMIT_MASK; |
| 371 |
val->intval = (v * 80000) + 3880000; |
| 372 |
break; |
| 373 |
case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| 374 |
if (IS_ENABLED(CONFIG_AXP20X_ADC)) { |
| 375 |
/* |
| 376 |
* IIO framework gives mV but Power Supply framework |
| 377 |
* gives uV. |
| 378 |
*/ |
| 379 |
ret = iio_read_channel_processed_scale(power->vbus_v, |
| 380 |
&val->intval, 1000); |
| 381 |
if (ret) |
| 382 |
return ret; |
| 383 |
|
| 384 |
return 0; |
| 385 |
} |
| 386 |
|
| 387 |
ret = axp20x_read_variable_width(power->regmap, |
| 388 |
AXP717_VBUS_V_H, 16); |
| 389 |
if (ret < 0) |
| 390 |
return ret; |
| 391 |
|
| 392 |
val->intval = (ret % AXP717_ADC_DATA_MASK) * 1000; |
| 393 |
break; |
| 394 |
default: |
| 395 |
return -EINVAL; |
| 396 |
} |
| 397 |
|
| 398 |
return 0; |
| 399 |
|
| 400 |
} |
| 401 |
|
| 402 |
static int axp20x_usb_power_set_voltage_min(struct axp20x_usb_power *power, |
| 403 |
int intval) |
| 404 |
{ |
| 405 |
int val; |
| 406 |
|
| 407 |
switch (intval) { |
| 408 |
case 4000000: |
| 409 |
case 4100000: |
| 410 |
case 4200000: |
| 411 |
case 4300000: |
| 412 |
case 4400000: |
| 413 |
case 4500000: |
| 414 |
case 4600000: |
| 415 |
case 4700000: |
| 416 |
val = (intval - 4000000) / 100000; |
| 417 |
return regmap_update_bits(power->regmap, |
| 418 |
AXP20X_VBUS_IPSOUT_MGMT, |
| 419 |
AXP20X_VBUS_VHOLD_MASK, |
| 420 |
val << AXP20X_VBUS_VHOLD_OFFSET); |
| 421 |
default: |
| 422 |
return -EINVAL; |
| 423 |
} |
| 424 |
|
| 425 |
return -EINVAL; |
| 426 |
} |
| 427 |
|
| 428 |
static int axp717_usb_power_set_voltage_min(struct axp20x_usb_power *power, |
| 429 |
int intval) |
| 430 |
{ |
| 431 |
int val; |
| 432 |
|
| 433 |
/* Minimum value of 3.88v and maximum of 5.08v. */ |
| 434 |
if (intval < 3880000 || intval > 5080000) |
| 435 |
return -EINVAL; |
| 436 |
|
| 437 |
/* step size of 80ma with 3.88v offset. */ |
| 438 |
val = (intval - 3880000) / 80000; |
| 439 |
return regmap_update_bits(power->regmap, |
| 440 |
AXP717_INPUT_VOL_LIMIT_CTRL, |
| 441 |
AXP717_INPUT_VOL_LIMIT_MASK, val); |
| 442 |
} |
| 443 |
|
| 444 |
static int axp20x_usb_power_set_input_current_limit(struct axp20x_usb_power *power, |
| 445 |
int intval) |
| 446 |
{ |
| 447 |
int ret; |
| 448 |
unsigned int reg; |
| 449 |
const unsigned int max = power->axp_data->curr_lim_table_size; |
| 450 |
|
| 451 |
if (intval == -1) |
| 452 |
return -EINVAL; |
| 453 |
|
| 454 |
if (power->max_input_cur && (intval > power->max_input_cur)) { |
| 455 |
dev_warn(power->dev, |
| 456 |
"requested current %d clamped to max current %d\n", |
| 457 |
intval, power->max_input_cur); |
| 458 |
intval = power->max_input_cur; |
| 459 |
} |
| 460 |
|
| 461 |
/* |
| 462 |
* BC1.2 detection can cause a race condition if we try to set a current |
| 463 |
* limit while it's in progress. When it finishes it will overwrite the |
| 464 |
* current limit we just set. |
| 465 |
*/ |
| 466 |
if (power->usb_bc_en_bit) { |
| 467 |
dev_dbg(power->dev, |
| 468 |
"disabling BC1.2 detection because current limit was set"); |
| 469 |
ret = regmap_field_write(power->usb_bc_en_bit, 0); |
| 470 |
if (ret) |
| 471 |
return ret; |
| 472 |
} |
| 473 |
|
| 474 |
for (reg = max - 1; reg > 0; reg--) |
| 475 |
if (power->axp_data->curr_lim_table[reg] <= intval) |
| 476 |
break; |
| 477 |
|
| 478 |
dev_dbg(power->dev, "setting input current limit reg to %d (%d uA), requested %d uA", |
| 479 |
reg, power->axp_data->curr_lim_table[reg], intval); |
| 480 |
|
| 481 |
return regmap_field_write(power->curr_lim_fld, reg); |
| 482 |
} |
| 483 |
|
| 484 |
static int axp717_usb_power_set_input_current_limit(struct axp20x_usb_power *power, |
| 485 |
int intval) |
| 486 |
{ |
| 487 |
int tmp; |
| 488 |
|
| 489 |
/* Minimum value of 100mA and maximum value of 3.25A*/ |
| 490 |
if (intval < 100000 || intval > 3250000) |
| 491 |
return -EINVAL; |
| 492 |
|
| 493 |
if (power->max_input_cur && (intval > power->max_input_cur)) { |
| 494 |
dev_warn(power->dev, |
| 495 |
"requested current %d clamped to max current %d\n", |
| 496 |
intval, power->max_input_cur); |
| 497 |
intval = power->max_input_cur; |
| 498 |
} |
| 499 |
|
| 500 |
/* Minimum value of 100mA with step size of 50mA. */ |
| 501 |
tmp = (intval - 100000) / 50000; |
| 502 |
return regmap_update_bits(power->regmap, |
| 503 |
AXP717_INPUT_CUR_LIMIT_CTRL, |
| 504 |
AXP717_INPUT_CUR_LIMIT_MASK, tmp); |
| 505 |
} |
| 506 |
|
| 507 |
static int axp20x_usb_power_set_property(struct power_supply *psy, |
| 508 |
enum power_supply_property psp, |
| 509 |
const union power_supply_propval *val) |
| 510 |
{ |
| 511 |
struct axp20x_usb_power *power = power_supply_get_drvdata(psy); |
| 512 |
|
| 513 |
switch (psp) { |
| 514 |
case POWER_SUPPLY_PROP_ONLINE: |
| 515 |
if (!power->vbus_disable_bit) |
| 516 |
return -EINVAL; |
| 517 |
|
| 518 |
return regmap_field_write(power->vbus_disable_bit, !val->intval); |
| 519 |
|
| 520 |
case POWER_SUPPLY_PROP_VOLTAGE_MIN: |
| 521 |
return axp20x_usb_power_set_voltage_min(power, val->intval); |
| 522 |
|
| 523 |
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| 524 |
return axp20x_usb_power_set_input_current_limit(power, val->intval); |
| 525 |
|
| 526 |
default: |
| 527 |
return -EINVAL; |
| 528 |
} |
| 529 |
} |
| 530 |
|
| 531 |
static int axp717_usb_power_set_property(struct power_supply *psy, |
| 532 |
enum power_supply_property psp, |
| 533 |
const union power_supply_propval *val) |
| 534 |
{ |
| 535 |
struct axp20x_usb_power *power = power_supply_get_drvdata(psy); |
| 536 |
|
| 537 |
switch (psp) { |
| 538 |
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| 539 |
return axp717_usb_power_set_input_current_limit(power, val->intval); |
| 540 |
|
| 541 |
case POWER_SUPPLY_PROP_VOLTAGE_MIN: |
| 542 |
return axp717_usb_power_set_voltage_min(power, val->intval); |
| 543 |
|
| 544 |
default: |
| 545 |
return -EINVAL; |
| 546 |
} |
| 547 |
|
| 548 |
return -EINVAL; |
| 549 |
} |
| 550 |
|
| 551 |
static int axp20x_usb_power_prop_writeable(struct power_supply *psy, |
| 552 |
enum power_supply_property psp) |
| 553 |
{ |
| 554 |
struct axp20x_usb_power *power = power_supply_get_drvdata(psy); |
| 555 |
|
| 556 |
/* |
| 557 |
* The VBUS path select flag works differently on AXP288 and newer: |
| 558 |
* - On AXP20x and AXP22x, the flag enables VBUS (ignoring N_VBUSEN). |
| 559 |
* - On AXP288 and AXP8xx, the flag disables VBUS (ignoring N_VBUSEN). |
| 560 |
* We only expose the control on variants where it can be used to force |
| 561 |
* the VBUS input offline. |
| 562 |
*/ |
| 563 |
if (psp == POWER_SUPPLY_PROP_ONLINE) |
| 564 |
return power->vbus_disable_bit != NULL; |
| 565 |
|
| 566 |
return psp == POWER_SUPPLY_PROP_VOLTAGE_MIN || |
| 567 |
psp == POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT; |
| 568 |
} |
| 569 |
|
| 570 |
static int axp717_usb_power_prop_writeable(struct power_supply *psy, |
| 571 |
enum power_supply_property psp) |
| 572 |
{ |
| 573 |
return psp == POWER_SUPPLY_PROP_VOLTAGE_MIN || |
| 574 |
psp == POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT; |
| 575 |
} |
| 576 |
|
| 577 |
static int axp20x_configure_iio_channels(struct platform_device *pdev, |
| 578 |
struct axp20x_usb_power *power) |
| 579 |
{ |
| 580 |
power->vbus_v = devm_iio_channel_get(&pdev->dev, "vbus_v"); |
| 581 |
if (IS_ERR(power->vbus_v)) { |
| 582 |
if (PTR_ERR(power->vbus_v) == -ENODEV) |
| 583 |
return -EPROBE_DEFER; |
| 584 |
return PTR_ERR(power->vbus_v); |
| 585 |
} |
| 586 |
|
| 587 |
power->vbus_i = devm_iio_channel_get(&pdev->dev, "vbus_i"); |
| 588 |
if (IS_ERR(power->vbus_i)) { |
| 589 |
if (PTR_ERR(power->vbus_i) == -ENODEV) |
| 590 |
return -EPROBE_DEFER; |
| 591 |
return PTR_ERR(power->vbus_i); |
| 592 |
} |
| 593 |
|
| 594 |
return 0; |
| 595 |
} |
| 596 |
|
| 597 |
static int axp717_configure_iio_channels(struct platform_device *pdev, |
| 598 |
struct axp20x_usb_power *power) |
| 599 |
{ |
| 600 |
power->vbus_v = devm_iio_channel_get(&pdev->dev, "vbus_v"); |
| 601 |
if (IS_ERR(power->vbus_v)) { |
| 602 |
if (PTR_ERR(power->vbus_v) == -ENODEV) |
| 603 |
return -EPROBE_DEFER; |
| 604 |
return PTR_ERR(power->vbus_v); |
| 605 |
} |
| 606 |
|
| 607 |
return 0; |
| 608 |
} |
| 609 |
|
| 610 |
static int axp20x_configure_adc_registers(struct axp20x_usb_power *power) |
| 611 |
{ |
| 612 |
/* Enable vbus voltage and current measurement */ |
| 613 |
return regmap_update_bits(power->regmap, AXP20X_ADC_EN1, |
| 614 |
AXP20X_ADC_EN1_VBUS_CURR | |
| 615 |
AXP20X_ADC_EN1_VBUS_VOLT, |
| 616 |
AXP20X_ADC_EN1_VBUS_CURR | |
| 617 |
AXP20X_ADC_EN1_VBUS_VOLT); |
| 618 |
} |
| 619 |
|
| 620 |
static int axp717_configure_adc_registers(struct axp20x_usb_power *power) |
| 621 |
{ |
| 622 |
/* Enable vbus voltage measurement */ |
| 623 |
return regmap_update_bits(power->regmap, AXP717_ADC_CH_EN_CONTROL, |
| 624 |
AXP717_ADC_EN_VBUS_VOLT, |
| 625 |
AXP717_ADC_EN_VBUS_VOLT); |
| 626 |
} |
| 627 |
|
| 628 |
static enum power_supply_property axp20x_usb_power_properties[] = { |
| 629 |
POWER_SUPPLY_PROP_HEALTH, |
| 630 |
POWER_SUPPLY_PROP_PRESENT, |
| 631 |
POWER_SUPPLY_PROP_ONLINE, |
| 632 |
POWER_SUPPLY_PROP_VOLTAGE_MIN, |
| 633 |
POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| 634 |
POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, |
| 635 |
POWER_SUPPLY_PROP_CURRENT_NOW, |
| 636 |
}; |
| 637 |
|
| 638 |
static enum power_supply_property axp22x_usb_power_properties[] = { |
| 639 |
POWER_SUPPLY_PROP_HEALTH, |
| 640 |
POWER_SUPPLY_PROP_PRESENT, |
| 641 |
POWER_SUPPLY_PROP_ONLINE, |
| 642 |
POWER_SUPPLY_PROP_VOLTAGE_MIN, |
| 643 |
POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, |
| 644 |
}; |
| 645 |
|
| 646 |
static enum power_supply_property axp717_usb_power_properties[] = { |
| 647 |
POWER_SUPPLY_PROP_HEALTH, |
| 648 |
POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, |
| 649 |
POWER_SUPPLY_PROP_ONLINE, |
| 650 |
POWER_SUPPLY_PROP_PRESENT, |
| 651 |
POWER_SUPPLY_PROP_USB_TYPE, |
| 652 |
POWER_SUPPLY_PROP_VOLTAGE_MIN, |
| 653 |
POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| 654 |
}; |
| 655 |
|
| 656 |
static enum power_supply_property axp813_usb_power_properties[] = { |
| 657 |
POWER_SUPPLY_PROP_HEALTH, |
| 658 |
POWER_SUPPLY_PROP_PRESENT, |
| 659 |
POWER_SUPPLY_PROP_ONLINE, |
| 660 |
POWER_SUPPLY_PROP_VOLTAGE_MIN, |
| 661 |
POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, |
| 662 |
POWER_SUPPLY_PROP_USB_TYPE, |
| 663 |
}; |
| 664 |
|
| 665 |
static const struct power_supply_desc axp20x_usb_power_desc = { |
| 666 |
.name = "axp20x-usb", |
| 667 |
.type = POWER_SUPPLY_TYPE_USB, |
| 668 |
.properties = axp20x_usb_power_properties, |
| 669 |
.num_properties = ARRAY_SIZE(axp20x_usb_power_properties), |
| 670 |
.property_is_writeable = axp20x_usb_power_prop_writeable, |
| 671 |
.get_property = axp20x_usb_power_get_property, |
| 672 |
.set_property = axp20x_usb_power_set_property, |
| 673 |
}; |
| 674 |
|
| 675 |
static const struct power_supply_desc axp22x_usb_power_desc = { |
| 676 |
.name = "axp20x-usb", |
| 677 |
.type = POWER_SUPPLY_TYPE_USB, |
| 678 |
.properties = axp22x_usb_power_properties, |
| 679 |
.num_properties = ARRAY_SIZE(axp22x_usb_power_properties), |
| 680 |
.property_is_writeable = axp20x_usb_power_prop_writeable, |
| 681 |
.get_property = axp20x_usb_power_get_property, |
| 682 |
.set_property = axp20x_usb_power_set_property, |
| 683 |
}; |
| 684 |
|
| 685 |
static const struct power_supply_desc axp717_usb_power_desc = { |
| 686 |
.name = "axp20x-usb", |
| 687 |
.type = POWER_SUPPLY_TYPE_USB, |
| 688 |
.properties = axp717_usb_power_properties, |
| 689 |
.num_properties = ARRAY_SIZE(axp717_usb_power_properties), |
| 690 |
.property_is_writeable = axp717_usb_power_prop_writeable, |
| 691 |
.get_property = axp717_usb_power_get_property, |
| 692 |
.set_property = axp717_usb_power_set_property, |
| 693 |
.usb_types = BIT(POWER_SUPPLY_USB_TYPE_SDP) | |
| 694 |
BIT(POWER_SUPPLY_USB_TYPE_CDP) | |
| 695 |
BIT(POWER_SUPPLY_USB_TYPE_DCP) | |
| 696 |
BIT(POWER_SUPPLY_USB_TYPE_UNKNOWN), |
| 697 |
}; |
| 698 |
|
| 699 |
static const struct power_supply_desc axp813_usb_power_desc = { |
| 700 |
.name = "axp20x-usb", |
| 701 |
.type = POWER_SUPPLY_TYPE_USB, |
| 702 |
.properties = axp813_usb_power_properties, |
| 703 |
.num_properties = ARRAY_SIZE(axp813_usb_power_properties), |
| 704 |
.property_is_writeable = axp20x_usb_power_prop_writeable, |
| 705 |
.get_property = axp20x_usb_power_get_property, |
| 706 |
.set_property = axp20x_usb_power_set_property, |
| 707 |
.usb_types = BIT(POWER_SUPPLY_USB_TYPE_SDP) | |
| 708 |
BIT(POWER_SUPPLY_USB_TYPE_CDP) | |
| 709 |
BIT(POWER_SUPPLY_USB_TYPE_DCP) | |
| 710 |
BIT(POWER_SUPPLY_USB_TYPE_UNKNOWN), |
| 711 |
}; |
| 712 |
|
| 713 |
static const char * const axp20x_irq_names[] = { |
| 714 |
"VBUS_PLUGIN", |
| 715 |
"VBUS_REMOVAL", |
| 716 |
"VBUS_VALID", |
| 717 |
"VBUS_NOT_VALID", |
| 718 |
}; |
| 719 |
|
| 720 |
static const char * const axp22x_irq_names[] = { |
| 721 |
"VBUS_PLUGIN", |
| 722 |
"VBUS_REMOVAL", |
| 723 |
}; |
| 724 |
|
| 725 |
static const char * const axp717_irq_names[] = { |
| 726 |
"VBUS_PLUGIN", |
| 727 |
"VBUS_REMOVAL", |
| 728 |
"VBUS_OVER_V", |
| 729 |
}; |
| 730 |
|
| 731 |
static int axp192_usb_curr_lim_table[] = { |
| 732 |
-1, |
| 733 |
-1, |
| 734 |
500000, |
| 735 |
100000, |
| 736 |
}; |
| 737 |
|
| 738 |
static int axp20x_usb_curr_lim_table[] = { |
| 739 |
900000, |
| 740 |
500000, |
| 741 |
100000, |
| 742 |
-1, |
| 743 |
}; |
| 744 |
|
| 745 |
static int axp221_usb_curr_lim_table[] = { |
| 746 |
900000, |
| 747 |
500000, |
| 748 |
-1, |
| 749 |
-1, |
| 750 |
}; |
| 751 |
|
| 752 |
static int axp813_usb_curr_lim_table[] = { |
| 753 |
100000, |
| 754 |
500000, |
| 755 |
900000, |
| 756 |
1500000, |
| 757 |
2000000, |
| 758 |
2500000, |
| 759 |
3000000, |
| 760 |
3500000, |
| 761 |
4000000, |
| 762 |
}; |
| 763 |
|
| 764 |
static const struct axp_data axp192_data = { |
| 765 |
.power_desc = &axp20x_usb_power_desc, |
| 766 |
.irq_names = axp20x_irq_names, |
| 767 |
.num_irq_names = ARRAY_SIZE(axp20x_irq_names), |
| 768 |
.curr_lim_table = axp192_usb_curr_lim_table, |
| 769 |
.curr_lim_table_size = ARRAY_SIZE(axp192_usb_curr_lim_table), |
| 770 |
.curr_lim_fld = REG_FIELD(AXP20X_VBUS_IPSOUT_MGMT, 0, 1), |
| 771 |
.vbus_valid_bit = REG_FIELD(AXP192_USB_OTG_STATUS, 2, 2), |
| 772 |
.vbus_mon_bit = REG_FIELD(AXP20X_VBUS_MON, 3, 3), |
| 773 |
.axp20x_read_vbus = &axp20x_usb_power_poll_vbus, |
| 774 |
.axp20x_cfg_iio_chan = axp20x_configure_iio_channels, |
| 775 |
.axp20x_cfg_adc_reg = axp20x_configure_adc_registers, |
| 776 |
}; |
| 777 |
|
| 778 |
static const struct axp_data axp202_data = { |
| 779 |
.power_desc = &axp20x_usb_power_desc, |
| 780 |
.irq_names = axp20x_irq_names, |
| 781 |
.num_irq_names = ARRAY_SIZE(axp20x_irq_names), |
| 782 |
.curr_lim_table = axp20x_usb_curr_lim_table, |
| 783 |
.curr_lim_table_size = ARRAY_SIZE(axp20x_usb_curr_lim_table), |
| 784 |
.curr_lim_fld = REG_FIELD(AXP20X_VBUS_IPSOUT_MGMT, 0, 1), |
| 785 |
.vbus_valid_bit = REG_FIELD(AXP20X_USB_OTG_STATUS, 2, 2), |
| 786 |
.vbus_mon_bit = REG_FIELD(AXP20X_VBUS_MON, 3, 3), |
| 787 |
.axp20x_read_vbus = &axp20x_usb_power_poll_vbus, |
| 788 |
.axp20x_cfg_iio_chan = axp20x_configure_iio_channels, |
| 789 |
.axp20x_cfg_adc_reg = axp20x_configure_adc_registers, |
| 790 |
}; |
| 791 |
|
| 792 |
static const struct axp_data axp221_data = { |
| 793 |
.power_desc = &axp22x_usb_power_desc, |
| 794 |
.irq_names = axp22x_irq_names, |
| 795 |
.num_irq_names = ARRAY_SIZE(axp22x_irq_names), |
| 796 |
.curr_lim_table = axp221_usb_curr_lim_table, |
| 797 |
.curr_lim_table_size = ARRAY_SIZE(axp221_usb_curr_lim_table), |
| 798 |
.curr_lim_fld = REG_FIELD(AXP20X_VBUS_IPSOUT_MGMT, 0, 1), |
| 799 |
.vbus_needs_polling = true, |
| 800 |
.axp20x_read_vbus = &axp20x_usb_power_poll_vbus, |
| 801 |
.axp20x_cfg_iio_chan = axp20x_configure_iio_channels, |
| 802 |
.axp20x_cfg_adc_reg = axp20x_configure_adc_registers, |
| 803 |
}; |
| 804 |
|
| 805 |
static const struct axp_data axp223_data = { |
| 806 |
.power_desc = &axp22x_usb_power_desc, |
| 807 |
.irq_names = axp22x_irq_names, |
| 808 |
.num_irq_names = ARRAY_SIZE(axp22x_irq_names), |
| 809 |
.curr_lim_table = axp20x_usb_curr_lim_table, |
| 810 |
.curr_lim_table_size = ARRAY_SIZE(axp20x_usb_curr_lim_table), |
| 811 |
.curr_lim_fld = REG_FIELD(AXP20X_VBUS_IPSOUT_MGMT, 0, 1), |
| 812 |
.vbus_needs_polling = true, |
| 813 |
.axp20x_read_vbus = &axp20x_usb_power_poll_vbus, |
| 814 |
.axp20x_cfg_iio_chan = axp20x_configure_iio_channels, |
| 815 |
.axp20x_cfg_adc_reg = axp20x_configure_adc_registers, |
| 816 |
}; |
| 817 |
|
| 818 |
static const struct axp_data axp717_data = { |
| 819 |
.power_desc = &axp717_usb_power_desc, |
| 820 |
.irq_names = axp717_irq_names, |
| 821 |
.num_irq_names = ARRAY_SIZE(axp717_irq_names), |
| 822 |
.curr_lim_fld = REG_FIELD(AXP717_INPUT_CUR_LIMIT_CTRL, 0, 5), |
| 823 |
.usb_bc_en_bit = REG_FIELD(AXP717_MODULE_EN_CONTROL_1, 4, 4), |
| 824 |
.usb_bc_det_fld = REG_FIELD(AXP717_BC_DETECT, 5, 7), |
| 825 |
.vbus_mon_bit = REG_FIELD(AXP717_ADC_CH_EN_CONTROL, 2, 2), |
| 826 |
.vbus_needs_polling = false, |
| 827 |
.axp20x_read_vbus = &axp717_usb_power_poll_vbus, |
| 828 |
.axp20x_cfg_iio_chan = axp717_configure_iio_channels, |
| 829 |
.axp20x_cfg_adc_reg = axp717_configure_adc_registers, |
| 830 |
}; |
| 831 |
|
| 832 |
static const struct axp_data axp813_data = { |
| 833 |
.power_desc = &axp813_usb_power_desc, |
| 834 |
.irq_names = axp22x_irq_names, |
| 835 |
.num_irq_names = ARRAY_SIZE(axp22x_irq_names), |
| 836 |
.curr_lim_table = axp813_usb_curr_lim_table, |
| 837 |
.curr_lim_table_size = ARRAY_SIZE(axp813_usb_curr_lim_table), |
| 838 |
.curr_lim_fld = REG_FIELD(AXP22X_CHRG_CTRL3, 4, 7), |
| 839 |
.usb_bc_en_bit = REG_FIELD(AXP288_BC_GLOBAL, 0, 0), |
| 840 |
.usb_bc_det_fld = REG_FIELD(AXP288_BC_DET_STAT, 5, 7), |
| 841 |
.vbus_disable_bit = REG_FIELD(AXP20X_VBUS_IPSOUT_MGMT, 7, 7), |
| 842 |
.vbus_needs_polling = true, |
| 843 |
.axp20x_read_vbus = &axp20x_usb_power_poll_vbus, |
| 844 |
.axp20x_cfg_iio_chan = axp20x_configure_iio_channels, |
| 845 |
.axp20x_cfg_adc_reg = axp20x_configure_adc_registers, |
| 846 |
}; |
| 847 |
|
| 848 |
#ifdef CONFIG_PM_SLEEP |
| 849 |
static int axp20x_usb_power_suspend(struct device *dev) |
| 850 |
{ |
| 851 |
struct axp20x_usb_power *power = dev_get_drvdata(dev); |
| 852 |
int i = 0; |
| 853 |
|
| 854 |
/* |
| 855 |
* Allow wake via VBUS_PLUGIN only. |
| 856 |
* |
| 857 |
* As nested threaded IRQs are not automatically disabled during |
| 858 |
* suspend, we must explicitly disable the remainder of the IRQs. |
| 859 |
*/ |
| 860 |
if (device_may_wakeup(&power->supply->dev)) |
| 861 |
enable_irq_wake(power->irqs[i++]); |
| 862 |
while (i < power->num_irqs) |
| 863 |
disable_irq(power->irqs[i++]); |
| 864 |
|
| 865 |
return 0; |
| 866 |
} |
| 867 |
|
| 868 |
static int axp20x_usb_power_resume(struct device *dev) |
| 869 |
{ |
| 870 |
struct axp20x_usb_power *power = dev_get_drvdata(dev); |
| 871 |
int i = 0; |
| 872 |
|
| 873 |
if (device_may_wakeup(&power->supply->dev)) |
| 874 |
disable_irq_wake(power->irqs[i++]); |
| 875 |
while (i < power->num_irqs) |
| 876 |
enable_irq(power->irqs[i++]); |
| 877 |
|
| 878 |
mod_delayed_work(system_power_efficient_wq, &power->vbus_detect, DEBOUNCE_TIME); |
| 879 |
|
| 880 |
return 0; |
| 881 |
} |
| 882 |
#endif |
| 883 |
|
| 884 |
static SIMPLE_DEV_PM_OPS(axp20x_usb_power_pm_ops, axp20x_usb_power_suspend, |
| 885 |
axp20x_usb_power_resume); |
| 886 |
|
| 887 |
static int axp20x_regmap_field_alloc_optional(struct device *dev, |
| 888 |
struct regmap *regmap, |
| 889 |
struct reg_field fdesc, |
| 890 |
struct regmap_field **fieldp) |
| 891 |
{ |
| 892 |
struct regmap_field *field; |
| 893 |
|
| 894 |
if (fdesc.reg == 0) { |
| 895 |
*fieldp = NULL; |
| 896 |
return 0; |
| 897 |
} |
| 898 |
|
| 899 |
field = devm_regmap_field_alloc(dev, regmap, fdesc); |
| 900 |
if (IS_ERR(field)) |
| 901 |
return PTR_ERR(field); |
| 902 |
|
| 903 |
*fieldp = field; |
| 904 |
return 0; |
| 905 |
} |
| 906 |
|
| 907 |
/* Optionally allow users to specify a maximum charging current. */ |
| 908 |
static void axp20x_usb_power_parse_dt(struct device *dev, |
| 909 |
struct axp20x_usb_power *power) |
| 910 |
{ |
| 911 |
int ret; |
| 912 |
|
| 913 |
ret = device_property_read_u32(dev, "input-current-limit-microamp", |
| 914 |
&power->max_input_cur); |
| 915 |
if (ret) |
| 916 |
dev_dbg(dev, "%s() no input-current-limit specified\n", __func__); |
| 917 |
} |
| 918 |
|
| 919 |
static int axp20x_usb_power_probe(struct platform_device *pdev) |
| 920 |
{ |
| 921 |
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); |
| 922 |
struct power_supply_config psy_cfg = {}; |
| 923 |
struct axp20x_usb_power *power; |
| 924 |
const struct axp_data *axp_data; |
| 925 |
int i, irq, ret; |
| 926 |
|
| 927 |
if (!of_device_is_available(pdev->dev.of_node)) |
| 928 |
return -ENODEV; |
| 929 |
|
| 930 |
if (!axp20x) { |
| 931 |
dev_err(&pdev->dev, "Parent drvdata not set\n"); |
| 932 |
return -EINVAL; |
| 933 |
} |
| 934 |
|
| 935 |
axp_data = of_device_get_match_data(&pdev->dev); |
| 936 |
|
| 937 |
power = devm_kzalloc(&pdev->dev, |
| 938 |
struct_size(power, irqs, axp_data->num_irq_names), |
| 939 |
GFP_KERNEL); |
| 940 |
if (!power) |
| 941 |
return -ENOMEM; |
| 942 |
|
| 943 |
platform_set_drvdata(pdev, power); |
| 944 |
|
| 945 |
power->dev = &pdev->dev; |
| 946 |
power->axp_data = axp_data; |
| 947 |
power->regmap = axp20x->regmap; |
| 948 |
power->num_irqs = axp_data->num_irq_names; |
| 949 |
|
| 950 |
power->curr_lim_fld = devm_regmap_field_alloc(&pdev->dev, power->regmap, |
| 951 |
axp_data->curr_lim_fld); |
| 952 |
if (IS_ERR(power->curr_lim_fld)) |
| 953 |
return PTR_ERR(power->curr_lim_fld); |
| 954 |
|
| 955 |
axp20x_usb_power_parse_dt(&pdev->dev, power); |
| 956 |
|
| 957 |
ret = axp20x_regmap_field_alloc_optional(&pdev->dev, power->regmap, |
| 958 |
axp_data->vbus_valid_bit, |
| 959 |
&power->vbus_valid_bit); |
| 960 |
if (ret) |
| 961 |
return ret; |
| 962 |
|
| 963 |
ret = axp20x_regmap_field_alloc_optional(&pdev->dev, power->regmap, |
| 964 |
axp_data->vbus_mon_bit, |
| 965 |
&power->vbus_mon_bit); |
| 966 |
if (ret) |
| 967 |
return ret; |
| 968 |
|
| 969 |
ret = axp20x_regmap_field_alloc_optional(&pdev->dev, power->regmap, |
| 970 |
axp_data->usb_bc_en_bit, |
| 971 |
&power->usb_bc_en_bit); |
| 972 |
if (ret) |
| 973 |
return ret; |
| 974 |
|
| 975 |
ret = axp20x_regmap_field_alloc_optional(&pdev->dev, power->regmap, |
| 976 |
axp_data->usb_bc_det_fld, |
| 977 |
&power->usb_bc_det_fld); |
| 978 |
if (ret) |
| 979 |
return ret; |
| 980 |
|
| 981 |
ret = axp20x_regmap_field_alloc_optional(&pdev->dev, power->regmap, |
| 982 |
axp_data->vbus_disable_bit, |
| 983 |
&power->vbus_disable_bit); |
| 984 |
if (ret) |
| 985 |
return ret; |
| 986 |
|
| 987 |
ret = devm_delayed_work_autocancel(&pdev->dev, &power->vbus_detect, |
| 988 |
axp_data->axp20x_read_vbus); |
| 989 |
if (ret) |
| 990 |
return ret; |
| 991 |
|
| 992 |
if (power->vbus_mon_bit) { |
| 993 |
/* Enable vbus valid checking */ |
| 994 |
ret = regmap_field_write(power->vbus_mon_bit, 1); |
| 995 |
if (ret) |
| 996 |
return ret; |
| 997 |
|
| 998 |
if (IS_ENABLED(CONFIG_AXP20X_ADC)) |
| 999 |
ret = axp_data->axp20x_cfg_iio_chan(pdev, power); |
| 1000 |
else |
| 1001 |
ret = axp_data->axp20x_cfg_adc_reg(power); |
| 1002 |
|
| 1003 |
if (ret) |
| 1004 |
return ret; |
| 1005 |
} |
| 1006 |
|
| 1007 |
if (power->usb_bc_en_bit) { |
| 1008 |
/* Enable USB Battery Charging specification detection */ |
| 1009 |
ret = regmap_field_write(power->usb_bc_en_bit, 1); |
| 1010 |
if (ret) |
| 1011 |
return ret; |
| 1012 |
} |
| 1013 |
|
| 1014 |
psy_cfg.fwnode = dev_fwnode(&pdev->dev); |
| 1015 |
psy_cfg.drv_data = power; |
| 1016 |
|
| 1017 |
power->supply = devm_power_supply_register(&pdev->dev, |
| 1018 |
axp_data->power_desc, |
| 1019 |
&psy_cfg); |
| 1020 |
if (IS_ERR(power->supply)) |
| 1021 |
return PTR_ERR(power->supply); |
| 1022 |
|
| 1023 |
/* Request irqs after registering, as irqs may trigger immediately */ |
| 1024 |
for (i = 0; i < axp_data->num_irq_names; i++) { |
| 1025 |
irq = platform_get_irq_byname(pdev, axp_data->irq_names[i]); |
| 1026 |
if (irq < 0) |
| 1027 |
return irq; |
| 1028 |
|
| 1029 |
power->irqs[i] = regmap_irq_get_virq(axp20x->regmap_irqc, irq); |
| 1030 |
ret = devm_request_any_context_irq(&pdev->dev, power->irqs[i], |
| 1031 |
axp20x_usb_power_irq, 0, |
| 1032 |
DRVNAME, power); |
| 1033 |
if (ret < 0) { |
| 1034 |
dev_err(&pdev->dev, "Error requesting %s IRQ: %d\n", |
| 1035 |
axp_data->irq_names[i], ret); |
| 1036 |
return ret; |
| 1037 |
} |
| 1038 |
} |
| 1039 |
|
| 1040 |
if (axp20x_usb_vbus_needs_polling(power)) |
| 1041 |
queue_delayed_work(system_power_efficient_wq, &power->vbus_detect, 0); |
| 1042 |
|
| 1043 |
return 0; |
| 1044 |
} |
| 1045 |
|
| 1046 |
static const struct of_device_id axp20x_usb_power_match[] = { |
| 1047 |
{ |
| 1048 |
.compatible = "x-powers,axp192-usb-power-supply", |
| 1049 |
.data = &axp192_data, |
| 1050 |
}, { |
| 1051 |
.compatible = "x-powers,axp202-usb-power-supply", |
| 1052 |
.data = &axp202_data, |
| 1053 |
}, { |
| 1054 |
.compatible = "x-powers,axp221-usb-power-supply", |
| 1055 |
.data = &axp221_data, |
| 1056 |
}, { |
| 1057 |
.compatible = "x-powers,axp223-usb-power-supply", |
| 1058 |
.data = &axp223_data, |
| 1059 |
}, { |
| 1060 |
.compatible = "x-powers,axp717-usb-power-supply", |
| 1061 |
.data = &axp717_data, |
| 1062 |
}, { |
| 1063 |
.compatible = "x-powers,axp813-usb-power-supply", |
| 1064 |
.data = &axp813_data, |
| 1065 |
}, { /* sentinel */ } |
| 1066 |
}; |
| 1067 |
MODULE_DEVICE_TABLE(of, axp20x_usb_power_match); |
| 1068 |
|
| 1069 |
static struct platform_driver axp20x_usb_power_driver = { |
| 1070 |
.probe = axp20x_usb_power_probe, |
| 1071 |
.driver = { |
| 1072 |
.name = DRVNAME, |
| 1073 |
.of_match_table = axp20x_usb_power_match, |
| 1074 |
.pm = &axp20x_usb_power_pm_ops, |
| 1075 |
}, |
| 1076 |
}; |
| 1077 |
|
| 1078 |
module_platform_driver(axp20x_usb_power_driver); |
| 1079 |
|
| 1080 |
MODULE_AUTHOR("Hans de Goede <[email protected]>"); |
| 1081 |
MODULE_DESCRIPTION("AXP20x PMIC USB power supply status driver"); |
| 1082 |
MODULE_LICENSE("GPL"); |