| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Driver for the TI bq24190 battery charger. |
| 4 |
* |
| 5 |
* Author: Mark A. Greer <[email protected]> |
| 6 |
*/ |
| 7 |
|
| 8 |
#include <linux/mod_devicetable.h> |
| 9 |
#include <linux/module.h> |
| 10 |
#include <linux/interrupt.h> |
| 11 |
#include <linux/delay.h> |
| 12 |
#include <linux/pm_runtime.h> |
| 13 |
#include <linux/power_supply.h> |
| 14 |
#include <linux/power/bq24190_charger.h> |
| 15 |
#include <linux/regulator/driver.h> |
| 16 |
#include <linux/regulator/machine.h> |
| 17 |
#include <linux/workqueue.h> |
| 18 |
#include <linux/i2c.h> |
| 19 |
#include <linux/extcon-provider.h> |
| 20 |
|
| 21 |
#define BQ24190_MANUFACTURER "Texas Instruments" |
| 22 |
|
| 23 |
#define BQ24190_REG_ISC 0x00 /* Input Source Control */ |
| 24 |
#define BQ24190_REG_ISC_EN_HIZ_MASK BIT(7) |
| 25 |
#define BQ24190_REG_ISC_EN_HIZ_SHIFT 7 |
| 26 |
#define BQ24190_REG_ISC_VINDPM_MASK (BIT(6) | BIT(5) | BIT(4) | \ |
| 27 |
BIT(3)) |
| 28 |
#define BQ24190_REG_ISC_VINDPM_SHIFT 3 |
| 29 |
#define BQ24190_REG_ISC_IINLIM_MASK (BIT(2) | BIT(1) | BIT(0)) |
| 30 |
#define BQ24190_REG_ISC_IINLIM_SHIFT 0 |
| 31 |
|
| 32 |
#define BQ24190_REG_POC 0x01 /* Power-On Configuration */ |
| 33 |
#define BQ24190_REG_POC_RESET_MASK BIT(7) |
| 34 |
#define BQ24190_REG_POC_RESET_SHIFT 7 |
| 35 |
#define BQ24190_REG_POC_WDT_RESET_MASK BIT(6) |
| 36 |
#define BQ24190_REG_POC_WDT_RESET_SHIFT 6 |
| 37 |
#define BQ24190_REG_POC_CHG_CONFIG_MASK (BIT(5) | BIT(4)) |
| 38 |
#define BQ24190_REG_POC_CHG_CONFIG_SHIFT 4 |
| 39 |
#define BQ24190_REG_POC_CHG_CONFIG_DISABLE 0x0 |
| 40 |
#define BQ24190_REG_POC_CHG_CONFIG_CHARGE 0x1 |
| 41 |
#define BQ24190_REG_POC_CHG_CONFIG_OTG 0x2 |
| 42 |
#define BQ24190_REG_POC_CHG_CONFIG_OTG_ALT 0x3 |
| 43 |
#define BQ24296_REG_POC_OTG_CONFIG_MASK BIT(5) |
| 44 |
#define BQ24296_REG_POC_OTG_CONFIG_SHIFT 5 |
| 45 |
#define BQ24296_REG_POC_CHG_CONFIG_MASK BIT(4) |
| 46 |
#define BQ24296_REG_POC_CHG_CONFIG_SHIFT 4 |
| 47 |
#define BQ24296_REG_POC_OTG_CONFIG_DISABLE 0x0 |
| 48 |
#define BQ24296_REG_POC_OTG_CONFIG_OTG 0x1 |
| 49 |
#define BQ24190_REG_POC_SYS_MIN_MASK (BIT(3) | BIT(2) | BIT(1)) |
| 50 |
#define BQ24190_REG_POC_SYS_MIN_SHIFT 1 |
| 51 |
#define BQ24190_REG_POC_SYS_MIN_MIN 3000 |
| 52 |
#define BQ24190_REG_POC_SYS_MIN_MAX 3700 |
| 53 |
#define BQ24190_REG_POC_BOOST_LIM_MASK BIT(0) |
| 54 |
#define BQ24190_REG_POC_BOOST_LIM_SHIFT 0 |
| 55 |
|
| 56 |
#define BQ24190_REG_CCC 0x02 /* Charge Current Control */ |
| 57 |
#define BQ24190_REG_CCC_ICHG_MASK (BIT(7) | BIT(6) | BIT(5) | \ |
| 58 |
BIT(4) | BIT(3) | BIT(2)) |
| 59 |
#define BQ24190_REG_CCC_ICHG_SHIFT 2 |
| 60 |
#define BQ24190_REG_CCC_FORCE_20PCT_MASK BIT(0) |
| 61 |
#define BQ24190_REG_CCC_FORCE_20PCT_SHIFT 0 |
| 62 |
|
| 63 |
#define BQ24190_REG_PCTCC 0x03 /* Pre-charge/Termination Current Cntl */ |
| 64 |
#define BQ24190_REG_PCTCC_IPRECHG_MASK (BIT(7) | BIT(6) | BIT(5) | \ |
| 65 |
BIT(4)) |
| 66 |
#define BQ24190_REG_PCTCC_IPRECHG_SHIFT 4 |
| 67 |
#define BQ24190_REG_PCTCC_IPRECHG_MIN 128 |
| 68 |
#define BQ24190_REG_PCTCC_IPRECHG_MAX 2048 |
| 69 |
#define BQ24190_REG_PCTCC_ITERM_MASK (BIT(3) | BIT(2) | BIT(1) | \ |
| 70 |
BIT(0)) |
| 71 |
#define BQ24190_REG_PCTCC_ITERM_SHIFT 0 |
| 72 |
#define BQ24190_REG_PCTCC_ITERM_MIN 128 |
| 73 |
#define BQ24190_REG_PCTCC_ITERM_MAX 2048 |
| 74 |
|
| 75 |
#define BQ24190_REG_CVC 0x04 /* Charge Voltage Control */ |
| 76 |
#define BQ24190_REG_CVC_VREG_MASK (BIT(7) | BIT(6) | BIT(5) | \ |
| 77 |
BIT(4) | BIT(3) | BIT(2)) |
| 78 |
#define BQ24190_REG_CVC_VREG_SHIFT 2 |
| 79 |
#define BQ24190_REG_CVC_BATLOWV_MASK BIT(1) |
| 80 |
#define BQ24190_REG_CVC_BATLOWV_SHIFT 1 |
| 81 |
#define BQ24190_REG_CVC_VRECHG_MASK BIT(0) |
| 82 |
#define BQ24190_REG_CVC_VRECHG_SHIFT 0 |
| 83 |
|
| 84 |
#define BQ24190_REG_CTTC 0x05 /* Charge Term/Timer Control */ |
| 85 |
#define BQ24190_REG_CTTC_EN_TERM_MASK BIT(7) |
| 86 |
#define BQ24190_REG_CTTC_EN_TERM_SHIFT 7 |
| 87 |
#define BQ24190_REG_CTTC_TERM_STAT_MASK BIT(6) |
| 88 |
#define BQ24190_REG_CTTC_TERM_STAT_SHIFT 6 |
| 89 |
#define BQ24190_REG_CTTC_WATCHDOG_MASK (BIT(5) | BIT(4)) |
| 90 |
#define BQ24190_REG_CTTC_WATCHDOG_SHIFT 4 |
| 91 |
#define BQ24190_REG_CTTC_EN_TIMER_MASK BIT(3) |
| 92 |
#define BQ24190_REG_CTTC_EN_TIMER_SHIFT 3 |
| 93 |
#define BQ24190_REG_CTTC_CHG_TIMER_MASK (BIT(2) | BIT(1)) |
| 94 |
#define BQ24190_REG_CTTC_CHG_TIMER_SHIFT 1 |
| 95 |
#define BQ24190_REG_CTTC_JEITA_ISET_MASK BIT(0) |
| 96 |
#define BQ24190_REG_CTTC_JEITA_ISET_SHIFT 0 |
| 97 |
|
| 98 |
#define BQ24190_REG_ICTRC 0x06 /* IR Comp/Thermal Regulation Control */ |
| 99 |
#define BQ24190_REG_ICTRC_BAT_COMP_MASK (BIT(7) | BIT(6) | BIT(5)) |
| 100 |
#define BQ24190_REG_ICTRC_BAT_COMP_SHIFT 5 |
| 101 |
#define BQ24190_REG_ICTRC_VCLAMP_MASK (BIT(4) | BIT(3) | BIT(2)) |
| 102 |
#define BQ24190_REG_ICTRC_VCLAMP_SHIFT 2 |
| 103 |
#define BQ24190_REG_ICTRC_TREG_MASK (BIT(1) | BIT(0)) |
| 104 |
#define BQ24190_REG_ICTRC_TREG_SHIFT 0 |
| 105 |
|
| 106 |
#define BQ24190_REG_MOC 0x07 /* Misc. Operation Control */ |
| 107 |
#define BQ24190_REG_MOC_DPDM_EN_MASK BIT(7) |
| 108 |
#define BQ24190_REG_MOC_DPDM_EN_SHIFT 7 |
| 109 |
#define BQ24190_REG_MOC_TMR2X_EN_MASK BIT(6) |
| 110 |
#define BQ24190_REG_MOC_TMR2X_EN_SHIFT 6 |
| 111 |
#define BQ24190_REG_MOC_BATFET_DISABLE_MASK BIT(5) |
| 112 |
#define BQ24190_REG_MOC_BATFET_DISABLE_SHIFT 5 |
| 113 |
#define BQ24190_REG_MOC_JEITA_VSET_MASK BIT(4) |
| 114 |
#define BQ24190_REG_MOC_JEITA_VSET_SHIFT 4 |
| 115 |
#define BQ24190_REG_MOC_INT_MASK_MASK (BIT(1) | BIT(0)) |
| 116 |
#define BQ24190_REG_MOC_INT_MASK_SHIFT 0 |
| 117 |
|
| 118 |
#define BQ24190_REG_SS 0x08 /* System Status */ |
| 119 |
#define BQ24190_REG_SS_VBUS_STAT_MASK (BIT(7) | BIT(6)) |
| 120 |
#define BQ24190_REG_SS_VBUS_STAT_SHIFT 6 |
| 121 |
#define BQ24190_REG_SS_CHRG_STAT_MASK (BIT(5) | BIT(4)) |
| 122 |
#define BQ24190_REG_SS_CHRG_STAT_SHIFT 4 |
| 123 |
#define BQ24190_REG_SS_DPM_STAT_MASK BIT(3) |
| 124 |
#define BQ24190_REG_SS_DPM_STAT_SHIFT 3 |
| 125 |
#define BQ24190_REG_SS_PG_STAT_MASK BIT(2) |
| 126 |
#define BQ24190_REG_SS_PG_STAT_SHIFT 2 |
| 127 |
#define BQ24190_REG_SS_THERM_STAT_MASK BIT(1) |
| 128 |
#define BQ24190_REG_SS_THERM_STAT_SHIFT 1 |
| 129 |
#define BQ24190_REG_SS_VSYS_STAT_MASK BIT(0) |
| 130 |
#define BQ24190_REG_SS_VSYS_STAT_SHIFT 0 |
| 131 |
|
| 132 |
#define BQ24190_REG_F 0x09 /* Fault */ |
| 133 |
#define BQ24190_REG_F_WATCHDOG_FAULT_MASK BIT(7) |
| 134 |
#define BQ24190_REG_F_WATCHDOG_FAULT_SHIFT 7 |
| 135 |
#define BQ24190_REG_F_BOOST_FAULT_MASK BIT(6) |
| 136 |
#define BQ24190_REG_F_BOOST_FAULT_SHIFT 6 |
| 137 |
#define BQ24190_REG_F_CHRG_FAULT_MASK (BIT(5) | BIT(4)) |
| 138 |
#define BQ24190_REG_F_CHRG_FAULT_SHIFT 4 |
| 139 |
#define BQ24190_REG_F_BAT_FAULT_MASK BIT(3) |
| 140 |
#define BQ24190_REG_F_BAT_FAULT_SHIFT 3 |
| 141 |
#define BQ24190_REG_F_NTC_FAULT_MASK (BIT(2) | BIT(1) | BIT(0)) |
| 142 |
#define BQ24190_REG_F_NTC_FAULT_SHIFT 0 |
| 143 |
#define BQ24296_REG_F_NTC_FAULT_MASK (BIT(1) | BIT(0)) |
| 144 |
#define BQ24296_REG_F_NTC_FAULT_SHIFT 0 |
| 145 |
|
| 146 |
#define BQ24190_REG_VPRS 0x0A /* Vendor/Part/Revision Status */ |
| 147 |
#define BQ24190_REG_VPRS_PN_MASK (BIT(5) | BIT(4) | BIT(3)) |
| 148 |
#define BQ24190_REG_VPRS_PN_SHIFT 3 |
| 149 |
#define BQ24190_REG_VPRS_PN_24190 0x4 |
| 150 |
#define BQ24190_REG_VPRS_PN_24192 0x5 /* Also 24193, 24196 */ |
| 151 |
#define BQ24190_REG_VPRS_PN_24192I 0x3 |
| 152 |
#define BQ24296_REG_VPRS_PN_MASK (BIT(7) | BIT(6) | BIT(5)) |
| 153 |
#define BQ24296_REG_VPRS_PN_SHIFT 5 |
| 154 |
#define BQ24296_REG_VPRS_PN_24296 0x1 |
| 155 |
#define BQ24296_REG_VPRS_PN_24297 0x3 |
| 156 |
#define BQ24190_REG_VPRS_TS_PROFILE_MASK BIT(2) |
| 157 |
#define BQ24190_REG_VPRS_TS_PROFILE_SHIFT 2 |
| 158 |
#define BQ24190_REG_VPRS_DEV_REG_MASK (BIT(1) | BIT(0)) |
| 159 |
#define BQ24190_REG_VPRS_DEV_REG_SHIFT 0 |
| 160 |
|
| 161 |
/* |
| 162 |
* The tables below provide a 2-way mapping for the value that goes in |
| 163 |
* the register field and the real-world value that it represents. |
| 164 |
* The index of the array is the value that goes in the register; the |
| 165 |
* number at that index in the array is the real-world value that it |
| 166 |
* represents. |
| 167 |
*/ |
| 168 |
|
| 169 |
/* REG00[2:0] (IINLIM) in uAh */ |
| 170 |
static const int bq24190_isc_iinlim_values[] = { |
| 171 |
100000, 150000, 500000, 900000, 1200000, 1500000, 2000000, 3000000 |
| 172 |
}; |
| 173 |
|
| 174 |
/* REG02[7:2] (ICHG) in uAh */ |
| 175 |
static const int bq24190_ccc_ichg_values[] = { |
| 176 |
512000, 576000, 640000, 704000, 768000, 832000, 896000, 960000, |
| 177 |
1024000, 1088000, 1152000, 1216000, 1280000, 1344000, 1408000, 1472000, |
| 178 |
1536000, 1600000, 1664000, 1728000, 1792000, 1856000, 1920000, 1984000, |
| 179 |
2048000, 2112000, 2176000, 2240000, 2304000, 2368000, 2432000, 2496000, |
| 180 |
2560000, 2624000, 2688000, 2752000, 2816000, 2880000, 2944000, 3008000, |
| 181 |
3072000, 3136000, 3200000, 3264000, 3328000, 3392000, 3456000, 3520000, |
| 182 |
3584000, 3648000, 3712000, 3776000, 3840000, 3904000, 3968000, 4032000, |
| 183 |
4096000, 4160000, 4224000, 4288000, 4352000, 4416000, 4480000, 4544000 |
| 184 |
}; |
| 185 |
|
| 186 |
/* ICHG higher than 3008mA is not supported in BQ24296 */ |
| 187 |
#define BQ24296_CCC_ICHG_VALUES_LEN 40 |
| 188 |
|
| 189 |
/* REG04[7:2] (VREG) in uV */ |
| 190 |
static const int bq24190_cvc_vreg_values[] = { |
| 191 |
3504000, 3520000, 3536000, 3552000, 3568000, 3584000, 3600000, 3616000, |
| 192 |
3632000, 3648000, 3664000, 3680000, 3696000, 3712000, 3728000, 3744000, |
| 193 |
3760000, 3776000, 3792000, 3808000, 3824000, 3840000, 3856000, 3872000, |
| 194 |
3888000, 3904000, 3920000, 3936000, 3952000, 3968000, 3984000, 4000000, |
| 195 |
4016000, 4032000, 4048000, 4064000, 4080000, 4096000, 4112000, 4128000, |
| 196 |
4144000, 4160000, 4176000, 4192000, 4208000, 4224000, 4240000, 4256000, |
| 197 |
4272000, 4288000, 4304000, 4320000, 4336000, 4352000, 4368000, 4384000, |
| 198 |
4400000 |
| 199 |
}; |
| 200 |
|
| 201 |
/* REG06[1:0] (TREG) in tenths of degrees Celsius */ |
| 202 |
static const int bq24190_ictrc_treg_values[] = { |
| 203 |
600, 800, 1000, 1200 |
| 204 |
}; |
| 205 |
|
| 206 |
enum bq24190_chip { |
| 207 |
BQ24190, |
| 208 |
BQ24192, |
| 209 |
BQ24192i, |
| 210 |
BQ24193, |
| 211 |
BQ24196, |
| 212 |
BQ24296, |
| 213 |
BQ24297, |
| 214 |
}; |
| 215 |
|
| 216 |
/* |
| 217 |
* The FAULT register is latched by the bq24190 (except for NTC_FAULT) |
| 218 |
* so the first read after a fault returns the latched value and subsequent |
| 219 |
* reads return the current value. In order to return the fault status |
| 220 |
* to the user, have the interrupt handler save the reg's value and retrieve |
| 221 |
* it in the appropriate health/status routine. |
| 222 |
*/ |
| 223 |
struct bq24190_dev_info { |
| 224 |
struct i2c_client *client; |
| 225 |
struct device *dev; |
| 226 |
struct extcon_dev *edev; |
| 227 |
struct power_supply *charger; |
| 228 |
struct power_supply *battery; |
| 229 |
struct delayed_work input_current_limit_work; |
| 230 |
char model_name[I2C_NAME_SIZE]; |
| 231 |
bool initialized; |
| 232 |
bool irq_event; |
| 233 |
bool otg_vbus_enabled; |
| 234 |
int charge_type; |
| 235 |
u16 sys_min; |
| 236 |
u16 iprechg; |
| 237 |
u16 iterm; |
| 238 |
u32 ichg; |
| 239 |
u32 ichg_max; |
| 240 |
u32 vreg; |
| 241 |
u32 vreg_max; |
| 242 |
struct mutex f_reg_lock; |
| 243 |
u8 f_reg; |
| 244 |
u8 ss_reg; |
| 245 |
u8 watchdog; |
| 246 |
const struct bq24190_chip_info *info; |
| 247 |
}; |
| 248 |
|
| 249 |
struct bq24190_chip_info { |
| 250 |
int ichg_array_size; |
| 251 |
#ifdef CONFIG_REGULATOR |
| 252 |
const struct regulator_desc *vbus_desc; |
| 253 |
#endif |
| 254 |
int (*check_chip)(struct bq24190_dev_info *bdi); |
| 255 |
int (*set_chg_config)(struct bq24190_dev_info *bdi, const u8 chg_config); |
| 256 |
int (*set_otg_vbus)(struct bq24190_dev_info *bdi, bool enable); |
| 257 |
u8 ntc_fault_mask; |
| 258 |
int (*get_ntc_status)(const u8 value); |
| 259 |
}; |
| 260 |
|
| 261 |
static int bq24190_charger_set_charge_type(struct bq24190_dev_info *bdi, |
| 262 |
const union power_supply_propval *val); |
| 263 |
|
| 264 |
static const unsigned int bq24190_usb_extcon_cable[] = { |
| 265 |
EXTCON_USB, |
| 266 |
EXTCON_NONE, |
| 267 |
}; |
| 268 |
|
| 269 |
|
| 270 |
/* |
| 271 |
* Return the index in 'tbl' of greatest value that is less than or equal to |
| 272 |
* 'val'. The index range returned is 0 to 'tbl_size' - 1. Assumes that |
| 273 |
* the values in 'tbl' are sorted from smallest to largest and 'tbl_size' |
| 274 |
* is less than 2^8. |
| 275 |
*/ |
| 276 |
static u8 bq24190_find_idx(const int tbl[], int tbl_size, int v) |
| 277 |
{ |
| 278 |
int i; |
| 279 |
|
| 280 |
for (i = 1; i < tbl_size; i++) |
| 281 |
if (v < tbl[i]) |
| 282 |
break; |
| 283 |
|
| 284 |
return i - 1; |
| 285 |
} |
| 286 |
|
| 287 |
/* Basic driver I/O routines */ |
| 288 |
|
| 289 |
static int bq24190_read(struct bq24190_dev_info *bdi, u8 reg, u8 *data) |
| 290 |
{ |
| 291 |
int ret; |
| 292 |
|
| 293 |
ret = i2c_smbus_read_byte_data(bdi->client, reg); |
| 294 |
if (ret < 0) |
| 295 |
return ret; |
| 296 |
|
| 297 |
*data = ret; |
| 298 |
return 0; |
| 299 |
} |
| 300 |
|
| 301 |
static int bq24190_write(struct bq24190_dev_info *bdi, u8 reg, u8 data) |
| 302 |
{ |
| 303 |
return i2c_smbus_write_byte_data(bdi->client, reg, data); |
| 304 |
} |
| 305 |
|
| 306 |
static int bq24190_read_mask(struct bq24190_dev_info *bdi, u8 reg, |
| 307 |
u8 mask, u8 shift, u8 *data) |
| 308 |
{ |
| 309 |
u8 v; |
| 310 |
int ret; |
| 311 |
|
| 312 |
ret = bq24190_read(bdi, reg, &v); |
| 313 |
if (ret < 0) |
| 314 |
return ret; |
| 315 |
|
| 316 |
v &= mask; |
| 317 |
v >>= shift; |
| 318 |
*data = v; |
| 319 |
|
| 320 |
return 0; |
| 321 |
} |
| 322 |
|
| 323 |
static int bq24190_write_mask(struct bq24190_dev_info *bdi, u8 reg, |
| 324 |
u8 mask, u8 shift, u8 data) |
| 325 |
{ |
| 326 |
u8 v; |
| 327 |
int ret; |
| 328 |
|
| 329 |
ret = bq24190_read(bdi, reg, &v); |
| 330 |
if (ret < 0) |
| 331 |
return ret; |
| 332 |
|
| 333 |
v &= ~mask; |
| 334 |
v |= ((data << shift) & mask); |
| 335 |
|
| 336 |
return bq24190_write(bdi, reg, v); |
| 337 |
} |
| 338 |
|
| 339 |
static int bq24190_get_field_val(struct bq24190_dev_info *bdi, |
| 340 |
u8 reg, u8 mask, u8 shift, |
| 341 |
const int tbl[], int tbl_size, |
| 342 |
int *val) |
| 343 |
{ |
| 344 |
u8 v; |
| 345 |
int ret; |
| 346 |
|
| 347 |
ret = bq24190_read_mask(bdi, reg, mask, shift, &v); |
| 348 |
if (ret < 0) |
| 349 |
return ret; |
| 350 |
|
| 351 |
v = (v >= tbl_size) ? (tbl_size - 1) : v; |
| 352 |
*val = tbl[v]; |
| 353 |
|
| 354 |
return 0; |
| 355 |
} |
| 356 |
|
| 357 |
static int bq24190_set_field_val(struct bq24190_dev_info *bdi, |
| 358 |
u8 reg, u8 mask, u8 shift, |
| 359 |
const int tbl[], int tbl_size, |
| 360 |
int val) |
| 361 |
{ |
| 362 |
u8 idx; |
| 363 |
|
| 364 |
idx = bq24190_find_idx(tbl, tbl_size, val); |
| 365 |
|
| 366 |
return bq24190_write_mask(bdi, reg, mask, shift, idx); |
| 367 |
} |
| 368 |
|
| 369 |
#ifdef CONFIG_SYSFS |
| 370 |
/* |
| 371 |
* There are a numerous options that are configurable on the bq24190 |
| 372 |
* that go well beyond what the power_supply properties provide access to. |
| 373 |
* Provide sysfs access to them so they can be examined and possibly modified |
| 374 |
* on the fly. They will be provided for the charger power_supply object only |
| 375 |
* and will be prefixed by 'f_' to make them easier to recognize. |
| 376 |
*/ |
| 377 |
|
| 378 |
#define BQ24190_SYSFS_FIELD(_name, r, f, m, store) \ |
| 379 |
{ \ |
| 380 |
.attr = __ATTR(f_##_name, m, bq24190_sysfs_show, store), \ |
| 381 |
.reg = BQ24190_REG_##r, \ |
| 382 |
.mask = BQ24190_REG_##r##_##f##_MASK, \ |
| 383 |
.shift = BQ24190_REG_##r##_##f##_SHIFT, \ |
| 384 |
} |
| 385 |
|
| 386 |
#define BQ24190_SYSFS_FIELD_RW(_name, r, f) \ |
| 387 |
BQ24190_SYSFS_FIELD(_name, r, f, S_IWUSR | S_IRUGO, \ |
| 388 |
bq24190_sysfs_store) |
| 389 |
|
| 390 |
#define BQ24190_SYSFS_FIELD_RO(_name, r, f) \ |
| 391 |
BQ24190_SYSFS_FIELD(_name, r, f, S_IRUGO, NULL) |
| 392 |
|
| 393 |
static ssize_t bq24190_sysfs_show(struct device *dev, |
| 394 |
struct device_attribute *attr, char *buf); |
| 395 |
static ssize_t bq24190_sysfs_store(struct device *dev, |
| 396 |
struct device_attribute *attr, const char *buf, size_t count); |
| 397 |
|
| 398 |
struct bq24190_sysfs_field_info { |
| 399 |
struct device_attribute attr; |
| 400 |
u8 reg; |
| 401 |
u8 mask; |
| 402 |
u8 shift; |
| 403 |
}; |
| 404 |
|
| 405 |
/* On i386 ptrace-abi.h defines SS that breaks the macro calls below. */ |
| 406 |
#undef SS |
| 407 |
|
| 408 |
static struct bq24190_sysfs_field_info bq24190_sysfs_field_tbl[] = { |
| 409 |
/* sysfs name reg field in reg */ |
| 410 |
BQ24190_SYSFS_FIELD_RW(en_hiz, ISC, EN_HIZ), |
| 411 |
BQ24190_SYSFS_FIELD_RW(vindpm, ISC, VINDPM), |
| 412 |
BQ24190_SYSFS_FIELD_RW(iinlim, ISC, IINLIM), |
| 413 |
BQ24190_SYSFS_FIELD_RW(chg_config, POC, CHG_CONFIG), |
| 414 |
BQ24190_SYSFS_FIELD_RW(sys_min, POC, SYS_MIN), |
| 415 |
BQ24190_SYSFS_FIELD_RW(boost_lim, POC, BOOST_LIM), |
| 416 |
BQ24190_SYSFS_FIELD_RW(ichg, CCC, ICHG), |
| 417 |
BQ24190_SYSFS_FIELD_RW(force_20_pct, CCC, FORCE_20PCT), |
| 418 |
BQ24190_SYSFS_FIELD_RW(iprechg, PCTCC, IPRECHG), |
| 419 |
BQ24190_SYSFS_FIELD_RW(iterm, PCTCC, ITERM), |
| 420 |
BQ24190_SYSFS_FIELD_RW(vreg, CVC, VREG), |
| 421 |
BQ24190_SYSFS_FIELD_RW(batlowv, CVC, BATLOWV), |
| 422 |
BQ24190_SYSFS_FIELD_RW(vrechg, CVC, VRECHG), |
| 423 |
BQ24190_SYSFS_FIELD_RW(en_term, CTTC, EN_TERM), |
| 424 |
BQ24190_SYSFS_FIELD_RW(term_stat, CTTC, TERM_STAT), |
| 425 |
BQ24190_SYSFS_FIELD_RO(watchdog, CTTC, WATCHDOG), |
| 426 |
BQ24190_SYSFS_FIELD_RW(en_timer, CTTC, EN_TIMER), |
| 427 |
BQ24190_SYSFS_FIELD_RW(chg_timer, CTTC, CHG_TIMER), |
| 428 |
BQ24190_SYSFS_FIELD_RW(jeita_iset, CTTC, JEITA_ISET), |
| 429 |
BQ24190_SYSFS_FIELD_RW(bat_comp, ICTRC, BAT_COMP), |
| 430 |
BQ24190_SYSFS_FIELD_RW(vclamp, ICTRC, VCLAMP), |
| 431 |
BQ24190_SYSFS_FIELD_RW(treg, ICTRC, TREG), |
| 432 |
BQ24190_SYSFS_FIELD_RW(dpdm_en, MOC, DPDM_EN), |
| 433 |
BQ24190_SYSFS_FIELD_RW(tmr2x_en, MOC, TMR2X_EN), |
| 434 |
BQ24190_SYSFS_FIELD_RW(batfet_disable, MOC, BATFET_DISABLE), |
| 435 |
BQ24190_SYSFS_FIELD_RW(jeita_vset, MOC, JEITA_VSET), |
| 436 |
BQ24190_SYSFS_FIELD_RO(int_mask, MOC, INT_MASK), |
| 437 |
BQ24190_SYSFS_FIELD_RO(vbus_stat, SS, VBUS_STAT), |
| 438 |
BQ24190_SYSFS_FIELD_RO(chrg_stat, SS, CHRG_STAT), |
| 439 |
BQ24190_SYSFS_FIELD_RO(dpm_stat, SS, DPM_STAT), |
| 440 |
BQ24190_SYSFS_FIELD_RO(pg_stat, SS, PG_STAT), |
| 441 |
BQ24190_SYSFS_FIELD_RO(therm_stat, SS, THERM_STAT), |
| 442 |
BQ24190_SYSFS_FIELD_RO(vsys_stat, SS, VSYS_STAT), |
| 443 |
BQ24190_SYSFS_FIELD_RO(watchdog_fault, F, WATCHDOG_FAULT), |
| 444 |
BQ24190_SYSFS_FIELD_RO(boost_fault, F, BOOST_FAULT), |
| 445 |
BQ24190_SYSFS_FIELD_RO(chrg_fault, F, CHRG_FAULT), |
| 446 |
BQ24190_SYSFS_FIELD_RO(bat_fault, F, BAT_FAULT), |
| 447 |
BQ24190_SYSFS_FIELD_RO(ntc_fault, F, NTC_FAULT), |
| 448 |
BQ24190_SYSFS_FIELD_RO(pn, VPRS, PN), |
| 449 |
BQ24190_SYSFS_FIELD_RO(ts_profile, VPRS, TS_PROFILE), |
| 450 |
BQ24190_SYSFS_FIELD_RO(dev_reg, VPRS, DEV_REG), |
| 451 |
}; |
| 452 |
|
| 453 |
static struct attribute * |
| 454 |
bq24190_sysfs_attrs[ARRAY_SIZE(bq24190_sysfs_field_tbl) + 1]; |
| 455 |
|
| 456 |
ATTRIBUTE_GROUPS(bq24190_sysfs); |
| 457 |
|
| 458 |
static void bq24190_sysfs_init_attrs(void) |
| 459 |
{ |
| 460 |
int i, limit = ARRAY_SIZE(bq24190_sysfs_field_tbl); |
| 461 |
|
| 462 |
for (i = 0; i < limit; i++) |
| 463 |
bq24190_sysfs_attrs[i] = &bq24190_sysfs_field_tbl[i].attr.attr; |
| 464 |
|
| 465 |
bq24190_sysfs_attrs[limit] = NULL; /* Has additional entry for this */ |
| 466 |
} |
| 467 |
|
| 468 |
static struct bq24190_sysfs_field_info *bq24190_sysfs_field_lookup( |
| 469 |
const char *name) |
| 470 |
{ |
| 471 |
int i, limit = ARRAY_SIZE(bq24190_sysfs_field_tbl); |
| 472 |
|
| 473 |
for (i = 0; i < limit; i++) |
| 474 |
if (!strcmp(name, bq24190_sysfs_field_tbl[i].attr.attr.name)) |
| 475 |
break; |
| 476 |
|
| 477 |
if (i >= limit) |
| 478 |
return NULL; |
| 479 |
|
| 480 |
return &bq24190_sysfs_field_tbl[i]; |
| 481 |
} |
| 482 |
|
| 483 |
static ssize_t bq24190_sysfs_show(struct device *dev, |
| 484 |
struct device_attribute *attr, char *buf) |
| 485 |
{ |
| 486 |
struct power_supply *psy = dev_to_psy(dev); |
| 487 |
struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy); |
| 488 |
struct bq24190_sysfs_field_info *info; |
| 489 |
ssize_t count; |
| 490 |
int ret; |
| 491 |
u8 v; |
| 492 |
|
| 493 |
info = bq24190_sysfs_field_lookup(attr->attr.name); |
| 494 |
if (!info) |
| 495 |
return -EINVAL; |
| 496 |
|
| 497 |
ret = pm_runtime_resume_and_get(bdi->dev); |
| 498 |
if (ret < 0) |
| 499 |
return ret; |
| 500 |
|
| 501 |
ret = bq24190_read_mask(bdi, info->reg, info->mask, info->shift, &v); |
| 502 |
if (ret) |
| 503 |
count = ret; |
| 504 |
else |
| 505 |
count = sysfs_emit(buf, "%hhx\n", v); |
| 506 |
|
| 507 |
pm_runtime_put_autosuspend(bdi->dev); |
| 508 |
|
| 509 |
return count; |
| 510 |
} |
| 511 |
|
| 512 |
static ssize_t bq24190_sysfs_store(struct device *dev, |
| 513 |
struct device_attribute *attr, const char *buf, size_t count) |
| 514 |
{ |
| 515 |
struct power_supply *psy = dev_to_psy(dev); |
| 516 |
struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy); |
| 517 |
struct bq24190_sysfs_field_info *info; |
| 518 |
int ret; |
| 519 |
u8 v; |
| 520 |
|
| 521 |
info = bq24190_sysfs_field_lookup(attr->attr.name); |
| 522 |
if (!info) |
| 523 |
return -EINVAL; |
| 524 |
|
| 525 |
ret = kstrtou8(buf, 0, &v); |
| 526 |
if (ret < 0) |
| 527 |
return ret; |
| 528 |
|
| 529 |
ret = pm_runtime_resume_and_get(bdi->dev); |
| 530 |
if (ret < 0) |
| 531 |
return ret; |
| 532 |
|
| 533 |
ret = bq24190_write_mask(bdi, info->reg, info->mask, info->shift, v); |
| 534 |
if (ret) |
| 535 |
count = ret; |
| 536 |
|
| 537 |
pm_runtime_put_autosuspend(bdi->dev); |
| 538 |
|
| 539 |
return count; |
| 540 |
} |
| 541 |
#endif |
| 542 |
|
| 543 |
static int bq24190_set_otg_vbus(struct bq24190_dev_info *bdi, bool enable) |
| 544 |
{ |
| 545 |
union power_supply_propval val = { .intval = bdi->charge_type }; |
| 546 |
int ret; |
| 547 |
|
| 548 |
ret = pm_runtime_resume_and_get(bdi->dev); |
| 549 |
if (ret < 0) { |
| 550 |
dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", ret); |
| 551 |
return ret; |
| 552 |
} |
| 553 |
|
| 554 |
bdi->otg_vbus_enabled = enable; |
| 555 |
if (enable) |
| 556 |
ret = bq24190_write_mask(bdi, BQ24190_REG_POC, |
| 557 |
BQ24190_REG_POC_CHG_CONFIG_MASK, |
| 558 |
BQ24190_REG_POC_CHG_CONFIG_SHIFT, |
| 559 |
BQ24190_REG_POC_CHG_CONFIG_OTG); |
| 560 |
else |
| 561 |
ret = bq24190_charger_set_charge_type(bdi, &val); |
| 562 |
|
| 563 |
pm_runtime_put_autosuspend(bdi->dev); |
| 564 |
|
| 565 |
return ret; |
| 566 |
} |
| 567 |
|
| 568 |
static int bq24296_set_otg_vbus(struct bq24190_dev_info *bdi, bool enable) |
| 569 |
{ |
| 570 |
union power_supply_propval val = { .intval = bdi->charge_type }; |
| 571 |
int ret; |
| 572 |
|
| 573 |
ret = pm_runtime_resume_and_get(bdi->dev); |
| 574 |
if (ret < 0) { |
| 575 |
dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", ret); |
| 576 |
return ret; |
| 577 |
} |
| 578 |
|
| 579 |
bdi->otg_vbus_enabled = enable; |
| 580 |
if (enable) { |
| 581 |
ret = bq24190_write_mask(bdi, BQ24190_REG_POC, |
| 582 |
BQ24296_REG_POC_CHG_CONFIG_MASK, |
| 583 |
BQ24296_REG_POC_CHG_CONFIG_SHIFT, |
| 584 |
BQ24190_REG_POC_CHG_CONFIG_DISABLE); |
| 585 |
|
| 586 |
if (ret < 0) |
| 587 |
goto out; |
| 588 |
|
| 589 |
ret = bq24190_write_mask(bdi, BQ24190_REG_POC, |
| 590 |
BQ24296_REG_POC_OTG_CONFIG_MASK, |
| 591 |
BQ24296_REG_POC_OTG_CONFIG_SHIFT, |
| 592 |
BQ24296_REG_POC_OTG_CONFIG_OTG); |
| 593 |
} else { |
| 594 |
ret = bq24190_write_mask(bdi, BQ24190_REG_POC, |
| 595 |
BQ24296_REG_POC_OTG_CONFIG_MASK, |
| 596 |
BQ24296_REG_POC_OTG_CONFIG_SHIFT, |
| 597 |
BQ24296_REG_POC_OTG_CONFIG_DISABLE); |
| 598 |
if (ret < 0) |
| 599 |
goto out; |
| 600 |
|
| 601 |
ret = bq24190_charger_set_charge_type(bdi, &val); |
| 602 |
} |
| 603 |
|
| 604 |
out: |
| 605 |
pm_runtime_put_autosuspend(bdi->dev); |
| 606 |
|
| 607 |
return ret; |
| 608 |
} |
| 609 |
|
| 610 |
#ifdef CONFIG_REGULATOR |
| 611 |
static int bq24190_vbus_enable(struct regulator_dev *dev) |
| 612 |
{ |
| 613 |
return bq24190_set_otg_vbus(rdev_get_drvdata(dev), true); |
| 614 |
} |
| 615 |
|
| 616 |
static int bq24190_vbus_disable(struct regulator_dev *dev) |
| 617 |
{ |
| 618 |
return bq24190_set_otg_vbus(rdev_get_drvdata(dev), false); |
| 619 |
} |
| 620 |
|
| 621 |
static int bq24190_vbus_is_enabled(struct regulator_dev *dev) |
| 622 |
{ |
| 623 |
struct bq24190_dev_info *bdi = rdev_get_drvdata(dev); |
| 624 |
int ret; |
| 625 |
u8 val; |
| 626 |
|
| 627 |
ret = pm_runtime_resume_and_get(bdi->dev); |
| 628 |
if (ret < 0) { |
| 629 |
dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", ret); |
| 630 |
return ret; |
| 631 |
} |
| 632 |
|
| 633 |
ret = bq24190_read_mask(bdi, BQ24190_REG_POC, |
| 634 |
BQ24190_REG_POC_CHG_CONFIG_MASK, |
| 635 |
BQ24190_REG_POC_CHG_CONFIG_SHIFT, &val); |
| 636 |
|
| 637 |
pm_runtime_put_autosuspend(bdi->dev); |
| 638 |
|
| 639 |
if (ret) |
| 640 |
return ret; |
| 641 |
|
| 642 |
bdi->otg_vbus_enabled = (val == BQ24190_REG_POC_CHG_CONFIG_OTG || |
| 643 |
val == BQ24190_REG_POC_CHG_CONFIG_OTG_ALT); |
| 644 |
return bdi->otg_vbus_enabled; |
| 645 |
} |
| 646 |
|
| 647 |
static int bq24296_vbus_enable(struct regulator_dev *dev) |
| 648 |
{ |
| 649 |
return bq24296_set_otg_vbus(rdev_get_drvdata(dev), true); |
| 650 |
} |
| 651 |
|
| 652 |
static int bq24296_vbus_disable(struct regulator_dev *dev) |
| 653 |
{ |
| 654 |
return bq24296_set_otg_vbus(rdev_get_drvdata(dev), false); |
| 655 |
} |
| 656 |
|
| 657 |
static int bq24296_vbus_is_enabled(struct regulator_dev *dev) |
| 658 |
{ |
| 659 |
struct bq24190_dev_info *bdi = rdev_get_drvdata(dev); |
| 660 |
int ret; |
| 661 |
u8 val; |
| 662 |
|
| 663 |
ret = pm_runtime_resume_and_get(bdi->dev); |
| 664 |
if (ret < 0) { |
| 665 |
dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", ret); |
| 666 |
return ret; |
| 667 |
} |
| 668 |
|
| 669 |
ret = bq24190_read_mask(bdi, BQ24190_REG_POC, |
| 670 |
BQ24296_REG_POC_OTG_CONFIG_MASK, |
| 671 |
BQ24296_REG_POC_OTG_CONFIG_SHIFT, &val); |
| 672 |
|
| 673 |
pm_runtime_put_autosuspend(bdi->dev); |
| 674 |
|
| 675 |
if (ret) |
| 676 |
return ret; |
| 677 |
|
| 678 |
bdi->otg_vbus_enabled = (val == BQ24296_REG_POC_OTG_CONFIG_OTG); |
| 679 |
|
| 680 |
return bdi->otg_vbus_enabled; |
| 681 |
} |
| 682 |
|
| 683 |
static const struct regulator_ops bq24190_vbus_ops = { |
| 684 |
.enable = bq24190_vbus_enable, |
| 685 |
.disable = bq24190_vbus_disable, |
| 686 |
.is_enabled = bq24190_vbus_is_enabled, |
| 687 |
}; |
| 688 |
|
| 689 |
static const struct regulator_desc bq24190_vbus_desc = { |
| 690 |
.name = "usb_otg_vbus", |
| 691 |
.of_match = "usb-otg-vbus", |
| 692 |
.type = REGULATOR_VOLTAGE, |
| 693 |
.owner = THIS_MODULE, |
| 694 |
.ops = &bq24190_vbus_ops, |
| 695 |
.fixed_uV = 5000000, |
| 696 |
.n_voltages = 1, |
| 697 |
}; |
| 698 |
|
| 699 |
static const struct regulator_ops bq24296_vbus_ops = { |
| 700 |
.enable = bq24296_vbus_enable, |
| 701 |
.disable = bq24296_vbus_disable, |
| 702 |
.is_enabled = bq24296_vbus_is_enabled, |
| 703 |
}; |
| 704 |
|
| 705 |
static const struct regulator_desc bq24296_vbus_desc = { |
| 706 |
.name = "usb_otg_vbus", |
| 707 |
.of_match = "usb-otg-vbus", |
| 708 |
.type = REGULATOR_VOLTAGE, |
| 709 |
.owner = THIS_MODULE, |
| 710 |
.ops = &bq24296_vbus_ops, |
| 711 |
.fixed_uV = 5000000, |
| 712 |
.n_voltages = 1, |
| 713 |
}; |
| 714 |
|
| 715 |
static const struct regulator_init_data bq24190_vbus_init_data = { |
| 716 |
.constraints = { |
| 717 |
.valid_ops_mask = REGULATOR_CHANGE_STATUS, |
| 718 |
}, |
| 719 |
}; |
| 720 |
|
| 721 |
static int bq24190_register_vbus_regulator(struct bq24190_dev_info *bdi) |
| 722 |
{ |
| 723 |
struct bq24190_platform_data *pdata = bdi->dev->platform_data; |
| 724 |
struct regulator_config cfg = { }; |
| 725 |
struct regulator_dev *reg; |
| 726 |
int ret = 0; |
| 727 |
|
| 728 |
cfg.dev = bdi->dev; |
| 729 |
if (pdata && pdata->regulator_init_data) |
| 730 |
cfg.init_data = pdata->regulator_init_data; |
| 731 |
else |
| 732 |
cfg.init_data = &bq24190_vbus_init_data; |
| 733 |
cfg.driver_data = bdi; |
| 734 |
reg = devm_regulator_register(bdi->dev, bdi->info->vbus_desc, &cfg); |
| 735 |
if (IS_ERR(reg)) { |
| 736 |
ret = PTR_ERR(reg); |
| 737 |
dev_err(bdi->dev, "Can't register regulator: %d\n", ret); |
| 738 |
} |
| 739 |
|
| 740 |
return ret; |
| 741 |
} |
| 742 |
#else |
| 743 |
static int bq24190_register_vbus_regulator(struct bq24190_dev_info *bdi) |
| 744 |
{ |
| 745 |
return 0; |
| 746 |
} |
| 747 |
#endif |
| 748 |
|
| 749 |
static int bq24190_set_config(struct bq24190_dev_info *bdi) |
| 750 |
{ |
| 751 |
int ret; |
| 752 |
u8 v; |
| 753 |
|
| 754 |
ret = bq24190_read(bdi, BQ24190_REG_CTTC, &v); |
| 755 |
if (ret < 0) |
| 756 |
return ret; |
| 757 |
|
| 758 |
bdi->watchdog = ((v & BQ24190_REG_CTTC_WATCHDOG_MASK) >> |
| 759 |
BQ24190_REG_CTTC_WATCHDOG_SHIFT); |
| 760 |
|
| 761 |
/* |
| 762 |
* According to the "Host Mode and default Mode" section of the |
| 763 |
* manual, a write to any register causes the bq24190 to switch |
| 764 |
* from default mode to host mode. It will switch back to default |
| 765 |
* mode after a WDT timeout unless the WDT is turned off as well. |
| 766 |
* So, by simply turning off the WDT, we accomplish both with the |
| 767 |
* same write. |
| 768 |
*/ |
| 769 |
v &= ~BQ24190_REG_CTTC_WATCHDOG_MASK; |
| 770 |
|
| 771 |
ret = bq24190_write(bdi, BQ24190_REG_CTTC, v); |
| 772 |
if (ret < 0) |
| 773 |
return ret; |
| 774 |
|
| 775 |
if (bdi->sys_min) { |
| 776 |
v = bdi->sys_min / 100 - 30; // manual section 9.5.1.2, table 9 |
| 777 |
ret = bq24190_write_mask(bdi, BQ24190_REG_POC, |
| 778 |
BQ24190_REG_POC_SYS_MIN_MASK, |
| 779 |
BQ24190_REG_POC_SYS_MIN_SHIFT, |
| 780 |
v); |
| 781 |
if (ret < 0) |
| 782 |
return ret; |
| 783 |
} |
| 784 |
|
| 785 |
if (bdi->iprechg) { |
| 786 |
v = bdi->iprechg / 128 - 1; // manual section 9.5.1.4, table 11 |
| 787 |
ret = bq24190_write_mask(bdi, BQ24190_REG_PCTCC, |
| 788 |
BQ24190_REG_PCTCC_IPRECHG_MASK, |
| 789 |
BQ24190_REG_PCTCC_IPRECHG_SHIFT, |
| 790 |
v); |
| 791 |
if (ret < 0) |
| 792 |
return ret; |
| 793 |
} |
| 794 |
|
| 795 |
if (bdi->iterm) { |
| 796 |
v = bdi->iterm / 128 - 1; // manual section 9.5.1.4, table 11 |
| 797 |
ret = bq24190_write_mask(bdi, BQ24190_REG_PCTCC, |
| 798 |
BQ24190_REG_PCTCC_ITERM_MASK, |
| 799 |
BQ24190_REG_PCTCC_ITERM_SHIFT, |
| 800 |
v); |
| 801 |
if (ret < 0) |
| 802 |
return ret; |
| 803 |
} |
| 804 |
|
| 805 |
if (bdi->ichg) { |
| 806 |
ret = bq24190_set_field_val(bdi, BQ24190_REG_CCC, |
| 807 |
BQ24190_REG_CCC_ICHG_MASK, |
| 808 |
BQ24190_REG_CCC_ICHG_SHIFT, |
| 809 |
bq24190_ccc_ichg_values, |
| 810 |
bdi->info->ichg_array_size, |
| 811 |
bdi->ichg); |
| 812 |
if (ret < 0) |
| 813 |
return ret; |
| 814 |
} |
| 815 |
|
| 816 |
if (bdi->vreg) { |
| 817 |
ret = bq24190_set_field_val(bdi, BQ24190_REG_CVC, |
| 818 |
BQ24190_REG_CVC_VREG_MASK, |
| 819 |
BQ24190_REG_CVC_VREG_SHIFT, |
| 820 |
bq24190_cvc_vreg_values, |
| 821 |
ARRAY_SIZE(bq24190_cvc_vreg_values), |
| 822 |
bdi->vreg); |
| 823 |
if (ret < 0) |
| 824 |
return ret; |
| 825 |
} |
| 826 |
|
| 827 |
return 0; |
| 828 |
} |
| 829 |
|
| 830 |
static int bq24190_register_reset(struct bq24190_dev_info *bdi) |
| 831 |
{ |
| 832 |
int ret, limit = 100; |
| 833 |
u8 v; |
| 834 |
|
| 835 |
/* |
| 836 |
* This prop. can be passed on device instantiation from platform code: |
| 837 |
* struct property_entry pe[] = |
| 838 |
* { PROPERTY_ENTRY_BOOL("disable-reset"), ... }; |
| 839 |
* struct i2c_board_info bi = |
| 840 |
* { .type = "bq24190", .addr = 0x6b, .properties = pe, .irq = irq }; |
| 841 |
* struct i2c_adapter ad = { ... }; |
| 842 |
* i2c_add_adapter(&ad); |
| 843 |
* i2c_new_client_device(&ad, &bi); |
| 844 |
*/ |
| 845 |
if (device_property_read_bool(bdi->dev, "disable-reset")) |
| 846 |
return 0; |
| 847 |
|
| 848 |
/* Reset the registers */ |
| 849 |
ret = bq24190_write_mask(bdi, BQ24190_REG_POC, |
| 850 |
BQ24190_REG_POC_RESET_MASK, |
| 851 |
BQ24190_REG_POC_RESET_SHIFT, |
| 852 |
0x1); |
| 853 |
if (ret < 0) |
| 854 |
return ret; |
| 855 |
|
| 856 |
/* Reset bit will be cleared by hardware so poll until it is */ |
| 857 |
do { |
| 858 |
ret = bq24190_read_mask(bdi, BQ24190_REG_POC, |
| 859 |
BQ24190_REG_POC_RESET_MASK, |
| 860 |
BQ24190_REG_POC_RESET_SHIFT, |
| 861 |
&v); |
| 862 |
if (ret < 0) |
| 863 |
return ret; |
| 864 |
|
| 865 |
if (v == 0) |
| 866 |
return 0; |
| 867 |
|
| 868 |
usleep_range(100, 200); |
| 869 |
} while (--limit); |
| 870 |
|
| 871 |
return -EIO; |
| 872 |
} |
| 873 |
|
| 874 |
/* Charger power supply property routines */ |
| 875 |
|
| 876 |
static int bq24190_charger_get_charge_type(struct bq24190_dev_info *bdi, |
| 877 |
union power_supply_propval *val) |
| 878 |
{ |
| 879 |
u8 v; |
| 880 |
int type, ret; |
| 881 |
|
| 882 |
ret = bq24190_read_mask(bdi, BQ24190_REG_POC, |
| 883 |
BQ24190_REG_POC_CHG_CONFIG_MASK, |
| 884 |
BQ24190_REG_POC_CHG_CONFIG_SHIFT, |
| 885 |
&v); |
| 886 |
if (ret < 0) |
| 887 |
return ret; |
| 888 |
|
| 889 |
/* If POC[CHG_CONFIG] (REG01[5:4]) == 0, charge is disabled */ |
| 890 |
if (!v) { |
| 891 |
type = POWER_SUPPLY_CHARGE_TYPE_NONE; |
| 892 |
} else { |
| 893 |
ret = bq24190_read_mask(bdi, BQ24190_REG_CCC, |
| 894 |
BQ24190_REG_CCC_FORCE_20PCT_MASK, |
| 895 |
BQ24190_REG_CCC_FORCE_20PCT_SHIFT, |
| 896 |
&v); |
| 897 |
if (ret < 0) |
| 898 |
return ret; |
| 899 |
|
| 900 |
type = (v) ? POWER_SUPPLY_CHARGE_TYPE_TRICKLE : |
| 901 |
POWER_SUPPLY_CHARGE_TYPE_FAST; |
| 902 |
} |
| 903 |
|
| 904 |
val->intval = type; |
| 905 |
|
| 906 |
return 0; |
| 907 |
} |
| 908 |
|
| 909 |
static int bq24190_battery_set_chg_config(struct bq24190_dev_info *bdi, |
| 910 |
const u8 chg_config) |
| 911 |
{ |
| 912 |
return bq24190_write_mask(bdi, BQ24190_REG_POC, |
| 913 |
BQ24190_REG_POC_CHG_CONFIG_MASK, |
| 914 |
BQ24190_REG_POC_CHG_CONFIG_SHIFT, |
| 915 |
chg_config); |
| 916 |
} |
| 917 |
|
| 918 |
static int bq24296_battery_set_chg_config(struct bq24190_dev_info *bdi, |
| 919 |
const u8 chg_config) |
| 920 |
{ |
| 921 |
return bq24190_write_mask(bdi, BQ24190_REG_POC, |
| 922 |
BQ24296_REG_POC_CHG_CONFIG_MASK, |
| 923 |
BQ24296_REG_POC_CHG_CONFIG_SHIFT, |
| 924 |
chg_config); |
| 925 |
} |
| 926 |
|
| 927 |
static int bq24190_charger_set_charge_type(struct bq24190_dev_info *bdi, |
| 928 |
const union power_supply_propval *val) |
| 929 |
{ |
| 930 |
u8 chg_config, force_20pct, en_term; |
| 931 |
int ret; |
| 932 |
|
| 933 |
/* |
| 934 |
* According to the "Termination when REG02[0] = 1" section of |
| 935 |
* the bq24190 manual, the trickle charge could be less than the |
| 936 |
* termination current so it recommends turning off the termination |
| 937 |
* function. |
| 938 |
* |
| 939 |
* Note: AFAICT from the datasheet, the user will have to manually |
| 940 |
* turn off the charging when in 20% mode. If its not turned off, |
| 941 |
* there could be battery damage. So, use this mode at your own risk. |
| 942 |
*/ |
| 943 |
switch (val->intval) { |
| 944 |
case POWER_SUPPLY_CHARGE_TYPE_NONE: |
| 945 |
chg_config = 0x0; |
| 946 |
break; |
| 947 |
case POWER_SUPPLY_CHARGE_TYPE_TRICKLE: |
| 948 |
chg_config = 0x1; |
| 949 |
force_20pct = 0x1; |
| 950 |
en_term = 0x0; |
| 951 |
break; |
| 952 |
case POWER_SUPPLY_CHARGE_TYPE_FAST: |
| 953 |
chg_config = 0x1; |
| 954 |
force_20pct = 0x0; |
| 955 |
en_term = 0x1; |
| 956 |
break; |
| 957 |
default: |
| 958 |
return -EINVAL; |
| 959 |
} |
| 960 |
|
| 961 |
bdi->charge_type = val->intval; |
| 962 |
/* |
| 963 |
* If the 5V Vbus boost regulator is enabled delay setting |
| 964 |
* the charge-type until its gets disabled. |
| 965 |
*/ |
| 966 |
if (bdi->otg_vbus_enabled) |
| 967 |
return 0; |
| 968 |
|
| 969 |
if (chg_config) { /* Enabling the charger */ |
| 970 |
ret = bq24190_write_mask(bdi, BQ24190_REG_CCC, |
| 971 |
BQ24190_REG_CCC_FORCE_20PCT_MASK, |
| 972 |
BQ24190_REG_CCC_FORCE_20PCT_SHIFT, |
| 973 |
force_20pct); |
| 974 |
if (ret < 0) |
| 975 |
return ret; |
| 976 |
|
| 977 |
ret = bq24190_write_mask(bdi, BQ24190_REG_CTTC, |
| 978 |
BQ24190_REG_CTTC_EN_TERM_MASK, |
| 979 |
BQ24190_REG_CTTC_EN_TERM_SHIFT, |
| 980 |
en_term); |
| 981 |
if (ret < 0) |
| 982 |
return ret; |
| 983 |
} |
| 984 |
|
| 985 |
return bdi->info->set_chg_config(bdi, chg_config); |
| 986 |
} |
| 987 |
|
| 988 |
static int bq24190_charger_get_ntc_status(u8 value) |
| 989 |
{ |
| 990 |
int health; |
| 991 |
|
| 992 |
switch (value >> BQ24190_REG_F_NTC_FAULT_SHIFT & 0x7) { |
| 993 |
case 0x1: /* TS1 Cold */ |
| 994 |
case 0x3: /* TS2 Cold */ |
| 995 |
case 0x5: /* Both Cold */ |
| 996 |
health = POWER_SUPPLY_HEALTH_COLD; |
| 997 |
break; |
| 998 |
case 0x2: /* TS1 Hot */ |
| 999 |
case 0x4: /* TS2 Hot */ |
| 1000 |
case 0x6: /* Both Hot */ |
| 1001 |
health = POWER_SUPPLY_HEALTH_OVERHEAT; |
| 1002 |
break; |
| 1003 |
default: |
| 1004 |
health = POWER_SUPPLY_HEALTH_UNKNOWN; |
| 1005 |
} |
| 1006 |
|
| 1007 |
return health; |
| 1008 |
} |
| 1009 |
|
| 1010 |
static int bq24296_charger_get_ntc_status(u8 value) |
| 1011 |
{ |
| 1012 |
int health; |
| 1013 |
|
| 1014 |
switch (value >> BQ24296_REG_F_NTC_FAULT_SHIFT & 0x3) { |
| 1015 |
case 0x0: /* Normal */ |
| 1016 |
health = POWER_SUPPLY_HEALTH_GOOD; |
| 1017 |
break; |
| 1018 |
case 0x1: /* Hot */ |
| 1019 |
health = POWER_SUPPLY_HEALTH_OVERHEAT; |
| 1020 |
break; |
| 1021 |
case 0x2: /* Cold */ |
| 1022 |
health = POWER_SUPPLY_HEALTH_COLD; |
| 1023 |
break; |
| 1024 |
default: |
| 1025 |
health = POWER_SUPPLY_HEALTH_UNKNOWN; |
| 1026 |
} |
| 1027 |
|
| 1028 |
return health; |
| 1029 |
} |
| 1030 |
|
| 1031 |
static int bq24190_charger_get_health(struct bq24190_dev_info *bdi, |
| 1032 |
union power_supply_propval *val) |
| 1033 |
{ |
| 1034 |
u8 v; |
| 1035 |
int health; |
| 1036 |
|
| 1037 |
mutex_lock(&bdi->f_reg_lock); |
| 1038 |
v = bdi->f_reg; |
| 1039 |
mutex_unlock(&bdi->f_reg_lock); |
| 1040 |
|
| 1041 |
if (v & bdi->info->ntc_fault_mask) { |
| 1042 |
health = bdi->info->get_ntc_status(v); |
| 1043 |
} else if (v & BQ24190_REG_F_BAT_FAULT_MASK) { |
| 1044 |
health = POWER_SUPPLY_HEALTH_OVERVOLTAGE; |
| 1045 |
} else if (v & BQ24190_REG_F_CHRG_FAULT_MASK) { |
| 1046 |
switch (v >> BQ24190_REG_F_CHRG_FAULT_SHIFT & 0x3) { |
| 1047 |
case 0x1: /* Input Fault (VBUS OVP or VBAT<VBUS<3.8V) */ |
| 1048 |
/* |
| 1049 |
* This could be over-voltage or under-voltage |
| 1050 |
* and there's no way to tell which. Instead |
| 1051 |
* of looking foolish and returning 'OVERVOLTAGE' |
| 1052 |
* when its really under-voltage, just return |
| 1053 |
* 'UNSPEC_FAILURE'. |
| 1054 |
*/ |
| 1055 |
health = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; |
| 1056 |
break; |
| 1057 |
case 0x2: /* Thermal Shutdown */ |
| 1058 |
health = POWER_SUPPLY_HEALTH_OVERHEAT; |
| 1059 |
break; |
| 1060 |
case 0x3: /* Charge Safety Timer Expiration */ |
| 1061 |
health = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE; |
| 1062 |
break; |
| 1063 |
default: /* prevent compiler warning */ |
| 1064 |
health = -1; |
| 1065 |
} |
| 1066 |
} else if (v & BQ24190_REG_F_BOOST_FAULT_MASK) { |
| 1067 |
/* |
| 1068 |
* This could be over-current or over-voltage but there's |
| 1069 |
* no way to tell which. Return 'OVERVOLTAGE' since there |
| 1070 |
* isn't an 'OVERCURRENT' value defined that we can return |
| 1071 |
* even if it was over-current. |
| 1072 |
*/ |
| 1073 |
health = POWER_SUPPLY_HEALTH_OVERVOLTAGE; |
| 1074 |
} else { |
| 1075 |
health = POWER_SUPPLY_HEALTH_GOOD; |
| 1076 |
} |
| 1077 |
|
| 1078 |
val->intval = health; |
| 1079 |
|
| 1080 |
return 0; |
| 1081 |
} |
| 1082 |
|
| 1083 |
static int bq24190_charger_get_online(struct bq24190_dev_info *bdi, |
| 1084 |
union power_supply_propval *val) |
| 1085 |
{ |
| 1086 |
u8 pg_stat, batfet_disable; |
| 1087 |
int ret; |
| 1088 |
|
| 1089 |
ret = bq24190_read_mask(bdi, BQ24190_REG_SS, |
| 1090 |
BQ24190_REG_SS_PG_STAT_MASK, |
| 1091 |
BQ24190_REG_SS_PG_STAT_SHIFT, &pg_stat); |
| 1092 |
if (ret < 0) |
| 1093 |
return ret; |
| 1094 |
|
| 1095 |
ret = bq24190_read_mask(bdi, BQ24190_REG_MOC, |
| 1096 |
BQ24190_REG_MOC_BATFET_DISABLE_MASK, |
| 1097 |
BQ24190_REG_MOC_BATFET_DISABLE_SHIFT, &batfet_disable); |
| 1098 |
if (ret < 0) |
| 1099 |
return ret; |
| 1100 |
|
| 1101 |
val->intval = pg_stat && !batfet_disable; |
| 1102 |
|
| 1103 |
return 0; |
| 1104 |
} |
| 1105 |
|
| 1106 |
static int bq24190_battery_set_online(struct bq24190_dev_info *bdi, |
| 1107 |
const union power_supply_propval *val); |
| 1108 |
static int bq24190_battery_get_status(struct bq24190_dev_info *bdi, |
| 1109 |
union power_supply_propval *val); |
| 1110 |
static int bq24190_battery_get_temp_alert_max(struct bq24190_dev_info *bdi, |
| 1111 |
union power_supply_propval *val); |
| 1112 |
static int bq24190_battery_set_temp_alert_max(struct bq24190_dev_info *bdi, |
| 1113 |
const union power_supply_propval *val); |
| 1114 |
|
| 1115 |
static int bq24190_charger_set_online(struct bq24190_dev_info *bdi, |
| 1116 |
const union power_supply_propval *val) |
| 1117 |
{ |
| 1118 |
return bq24190_battery_set_online(bdi, val); |
| 1119 |
} |
| 1120 |
|
| 1121 |
static int bq24190_charger_get_status(struct bq24190_dev_info *bdi, |
| 1122 |
union power_supply_propval *val) |
| 1123 |
{ |
| 1124 |
return bq24190_battery_get_status(bdi, val); |
| 1125 |
} |
| 1126 |
|
| 1127 |
static int bq24190_charger_get_temp_alert_max(struct bq24190_dev_info *bdi, |
| 1128 |
union power_supply_propval *val) |
| 1129 |
{ |
| 1130 |
return bq24190_battery_get_temp_alert_max(bdi, val); |
| 1131 |
} |
| 1132 |
|
| 1133 |
static int bq24190_charger_set_temp_alert_max(struct bq24190_dev_info *bdi, |
| 1134 |
const union power_supply_propval *val) |
| 1135 |
{ |
| 1136 |
return bq24190_battery_set_temp_alert_max(bdi, val); |
| 1137 |
} |
| 1138 |
|
| 1139 |
static int bq24190_charger_get_precharge(struct bq24190_dev_info *bdi, |
| 1140 |
union power_supply_propval *val) |
| 1141 |
{ |
| 1142 |
u8 v; |
| 1143 |
int curr, ret; |
| 1144 |
|
| 1145 |
ret = bq24190_read_mask(bdi, BQ24190_REG_PCTCC, |
| 1146 |
BQ24190_REG_PCTCC_IPRECHG_MASK, |
| 1147 |
BQ24190_REG_PCTCC_IPRECHG_SHIFT, &v); |
| 1148 |
if (ret < 0) |
| 1149 |
return ret; |
| 1150 |
|
| 1151 |
curr = ++v * 128 * 1000; |
| 1152 |
|
| 1153 |
ret = bq24190_read_mask(bdi, BQ24190_REG_CCC, |
| 1154 |
BQ24190_REG_CCC_FORCE_20PCT_MASK, |
| 1155 |
BQ24190_REG_CCC_FORCE_20PCT_SHIFT, &v); |
| 1156 |
if (ret < 0) |
| 1157 |
return ret; |
| 1158 |
|
| 1159 |
/* If FORCE_20PCT is enabled, then current is 50% of IPRECHG value */ |
| 1160 |
if (v) |
| 1161 |
curr /= 2; |
| 1162 |
|
| 1163 |
val->intval = curr; |
| 1164 |
|
| 1165 |
return 0; |
| 1166 |
} |
| 1167 |
|
| 1168 |
static int bq24190_charger_get_charge_term(struct bq24190_dev_info *bdi, |
| 1169 |
union power_supply_propval *val) |
| 1170 |
{ |
| 1171 |
u8 v; |
| 1172 |
int ret; |
| 1173 |
|
| 1174 |
ret = bq24190_read_mask(bdi, BQ24190_REG_PCTCC, |
| 1175 |
BQ24190_REG_PCTCC_ITERM_MASK, |
| 1176 |
BQ24190_REG_PCTCC_ITERM_SHIFT, &v); |
| 1177 |
if (ret < 0) |
| 1178 |
return ret; |
| 1179 |
|
| 1180 |
val->intval = ++v * 128 * 1000; |
| 1181 |
return 0; |
| 1182 |
} |
| 1183 |
|
| 1184 |
static int bq24190_charger_get_current(struct bq24190_dev_info *bdi, |
| 1185 |
union power_supply_propval *val) |
| 1186 |
{ |
| 1187 |
u8 v; |
| 1188 |
int curr, ret; |
| 1189 |
|
| 1190 |
ret = bq24190_get_field_val(bdi, BQ24190_REG_CCC, |
| 1191 |
BQ24190_REG_CCC_ICHG_MASK, BQ24190_REG_CCC_ICHG_SHIFT, |
| 1192 |
bq24190_ccc_ichg_values, |
| 1193 |
bdi->info->ichg_array_size, &curr); |
| 1194 |
if (ret < 0) |
| 1195 |
return ret; |
| 1196 |
|
| 1197 |
ret = bq24190_read_mask(bdi, BQ24190_REG_CCC, |
| 1198 |
BQ24190_REG_CCC_FORCE_20PCT_MASK, |
| 1199 |
BQ24190_REG_CCC_FORCE_20PCT_SHIFT, &v); |
| 1200 |
if (ret < 0) |
| 1201 |
return ret; |
| 1202 |
|
| 1203 |
/* If FORCE_20PCT is enabled, then current is 20% of ICHG value */ |
| 1204 |
if (v) |
| 1205 |
curr /= 5; |
| 1206 |
|
| 1207 |
val->intval = curr; |
| 1208 |
return 0; |
| 1209 |
} |
| 1210 |
|
| 1211 |
static int bq24190_charger_set_current(struct bq24190_dev_info *bdi, |
| 1212 |
const union power_supply_propval *val) |
| 1213 |
{ |
| 1214 |
u8 v; |
| 1215 |
int ret, curr = val->intval; |
| 1216 |
|
| 1217 |
ret = bq24190_read_mask(bdi, BQ24190_REG_CCC, |
| 1218 |
BQ24190_REG_CCC_FORCE_20PCT_MASK, |
| 1219 |
BQ24190_REG_CCC_FORCE_20PCT_SHIFT, &v); |
| 1220 |
if (ret < 0) |
| 1221 |
return ret; |
| 1222 |
|
| 1223 |
/* If FORCE_20PCT is enabled, have to multiply value passed in by 5 */ |
| 1224 |
if (v) |
| 1225 |
curr *= 5; |
| 1226 |
|
| 1227 |
if (curr > bdi->ichg_max) |
| 1228 |
return -EINVAL; |
| 1229 |
|
| 1230 |
ret = bq24190_set_field_val(bdi, BQ24190_REG_CCC, |
| 1231 |
BQ24190_REG_CCC_ICHG_MASK, BQ24190_REG_CCC_ICHG_SHIFT, |
| 1232 |
bq24190_ccc_ichg_values, |
| 1233 |
bdi->info->ichg_array_size, curr); |
| 1234 |
if (ret < 0) |
| 1235 |
return ret; |
| 1236 |
|
| 1237 |
bdi->ichg = curr; |
| 1238 |
|
| 1239 |
return 0; |
| 1240 |
} |
| 1241 |
|
| 1242 |
static int bq24190_charger_get_voltage(struct bq24190_dev_info *bdi, |
| 1243 |
union power_supply_propval *val) |
| 1244 |
{ |
| 1245 |
int voltage, ret; |
| 1246 |
|
| 1247 |
ret = bq24190_get_field_val(bdi, BQ24190_REG_CVC, |
| 1248 |
BQ24190_REG_CVC_VREG_MASK, BQ24190_REG_CVC_VREG_SHIFT, |
| 1249 |
bq24190_cvc_vreg_values, |
| 1250 |
ARRAY_SIZE(bq24190_cvc_vreg_values), &voltage); |
| 1251 |
if (ret < 0) |
| 1252 |
return ret; |
| 1253 |
|
| 1254 |
val->intval = voltage; |
| 1255 |
return 0; |
| 1256 |
} |
| 1257 |
|
| 1258 |
static int bq24190_charger_set_voltage(struct bq24190_dev_info *bdi, |
| 1259 |
const union power_supply_propval *val) |
| 1260 |
{ |
| 1261 |
int ret; |
| 1262 |
|
| 1263 |
if (val->intval > bdi->vreg_max) |
| 1264 |
return -EINVAL; |
| 1265 |
|
| 1266 |
ret = bq24190_set_field_val(bdi, BQ24190_REG_CVC, |
| 1267 |
BQ24190_REG_CVC_VREG_MASK, BQ24190_REG_CVC_VREG_SHIFT, |
| 1268 |
bq24190_cvc_vreg_values, |
| 1269 |
ARRAY_SIZE(bq24190_cvc_vreg_values), val->intval); |
| 1270 |
if (ret < 0) |
| 1271 |
return ret; |
| 1272 |
|
| 1273 |
bdi->vreg = val->intval; |
| 1274 |
|
| 1275 |
return 0; |
| 1276 |
} |
| 1277 |
|
| 1278 |
static int bq24190_charger_get_iinlimit(struct bq24190_dev_info *bdi, |
| 1279 |
union power_supply_propval *val) |
| 1280 |
{ |
| 1281 |
int iinlimit, ret; |
| 1282 |
|
| 1283 |
ret = bq24190_get_field_val(bdi, BQ24190_REG_ISC, |
| 1284 |
BQ24190_REG_ISC_IINLIM_MASK, |
| 1285 |
BQ24190_REG_ISC_IINLIM_SHIFT, |
| 1286 |
bq24190_isc_iinlim_values, |
| 1287 |
ARRAY_SIZE(bq24190_isc_iinlim_values), &iinlimit); |
| 1288 |
if (ret < 0) |
| 1289 |
return ret; |
| 1290 |
|
| 1291 |
val->intval = iinlimit; |
| 1292 |
return 0; |
| 1293 |
} |
| 1294 |
|
| 1295 |
static int bq24190_charger_set_iinlimit(struct bq24190_dev_info *bdi, |
| 1296 |
const union power_supply_propval *val) |
| 1297 |
{ |
| 1298 |
return bq24190_set_field_val(bdi, BQ24190_REG_ISC, |
| 1299 |
BQ24190_REG_ISC_IINLIM_MASK, |
| 1300 |
BQ24190_REG_ISC_IINLIM_SHIFT, |
| 1301 |
bq24190_isc_iinlim_values, |
| 1302 |
ARRAY_SIZE(bq24190_isc_iinlim_values), val->intval); |
| 1303 |
} |
| 1304 |
|
| 1305 |
static int bq24190_charger_get_property(struct power_supply *psy, |
| 1306 |
enum power_supply_property psp, union power_supply_propval *val) |
| 1307 |
{ |
| 1308 |
struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy); |
| 1309 |
int ret; |
| 1310 |
|
| 1311 |
dev_dbg(bdi->dev, "prop: %d\n", psp); |
| 1312 |
|
| 1313 |
ret = pm_runtime_resume_and_get(bdi->dev); |
| 1314 |
if (ret < 0) |
| 1315 |
return ret; |
| 1316 |
|
| 1317 |
switch (psp) { |
| 1318 |
case POWER_SUPPLY_PROP_CHARGE_TYPE: |
| 1319 |
case POWER_SUPPLY_PROP_CHARGE_TYPES: |
| 1320 |
ret = bq24190_charger_get_charge_type(bdi, val); |
| 1321 |
break; |
| 1322 |
case POWER_SUPPLY_PROP_HEALTH: |
| 1323 |
ret = bq24190_charger_get_health(bdi, val); |
| 1324 |
break; |
| 1325 |
case POWER_SUPPLY_PROP_ONLINE: |
| 1326 |
ret = bq24190_charger_get_online(bdi, val); |
| 1327 |
break; |
| 1328 |
case POWER_SUPPLY_PROP_STATUS: |
| 1329 |
ret = bq24190_charger_get_status(bdi, val); |
| 1330 |
break; |
| 1331 |
case POWER_SUPPLY_PROP_TEMP_ALERT_MAX: |
| 1332 |
ret = bq24190_charger_get_temp_alert_max(bdi, val); |
| 1333 |
break; |
| 1334 |
case POWER_SUPPLY_PROP_PRECHARGE_CURRENT: |
| 1335 |
ret = bq24190_charger_get_precharge(bdi, val); |
| 1336 |
break; |
| 1337 |
case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT: |
| 1338 |
ret = bq24190_charger_get_charge_term(bdi, val); |
| 1339 |
break; |
| 1340 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: |
| 1341 |
ret = bq24190_charger_get_current(bdi, val); |
| 1342 |
break; |
| 1343 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: |
| 1344 |
val->intval = bdi->ichg_max; |
| 1345 |
ret = 0; |
| 1346 |
break; |
| 1347 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: |
| 1348 |
ret = bq24190_charger_get_voltage(bdi, val); |
| 1349 |
break; |
| 1350 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: |
| 1351 |
val->intval = bdi->vreg_max; |
| 1352 |
ret = 0; |
| 1353 |
break; |
| 1354 |
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| 1355 |
ret = bq24190_charger_get_iinlimit(bdi, val); |
| 1356 |
break; |
| 1357 |
case POWER_SUPPLY_PROP_SCOPE: |
| 1358 |
val->intval = POWER_SUPPLY_SCOPE_SYSTEM; |
| 1359 |
ret = 0; |
| 1360 |
break; |
| 1361 |
case POWER_SUPPLY_PROP_MODEL_NAME: |
| 1362 |
val->strval = bdi->model_name; |
| 1363 |
ret = 0; |
| 1364 |
break; |
| 1365 |
case POWER_SUPPLY_PROP_MANUFACTURER: |
| 1366 |
val->strval = BQ24190_MANUFACTURER; |
| 1367 |
ret = 0; |
| 1368 |
break; |
| 1369 |
default: |
| 1370 |
ret = -ENODATA; |
| 1371 |
} |
| 1372 |
|
| 1373 |
pm_runtime_put_autosuspend(bdi->dev); |
| 1374 |
|
| 1375 |
return ret; |
| 1376 |
} |
| 1377 |
|
| 1378 |
static int bq24190_charger_set_property(struct power_supply *psy, |
| 1379 |
enum power_supply_property psp, |
| 1380 |
const union power_supply_propval *val) |
| 1381 |
{ |
| 1382 |
struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy); |
| 1383 |
int ret; |
| 1384 |
|
| 1385 |
dev_dbg(bdi->dev, "prop: %d\n", psp); |
| 1386 |
|
| 1387 |
ret = pm_runtime_resume_and_get(bdi->dev); |
| 1388 |
if (ret < 0) |
| 1389 |
return ret; |
| 1390 |
|
| 1391 |
switch (psp) { |
| 1392 |
case POWER_SUPPLY_PROP_ONLINE: |
| 1393 |
ret = bq24190_charger_set_online(bdi, val); |
| 1394 |
break; |
| 1395 |
case POWER_SUPPLY_PROP_TEMP_ALERT_MAX: |
| 1396 |
ret = bq24190_charger_set_temp_alert_max(bdi, val); |
| 1397 |
break; |
| 1398 |
case POWER_SUPPLY_PROP_CHARGE_TYPE: |
| 1399 |
case POWER_SUPPLY_PROP_CHARGE_TYPES: |
| 1400 |
ret = bq24190_charger_set_charge_type(bdi, val); |
| 1401 |
break; |
| 1402 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: |
| 1403 |
ret = bq24190_charger_set_current(bdi, val); |
| 1404 |
break; |
| 1405 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: |
| 1406 |
ret = bq24190_charger_set_voltage(bdi, val); |
| 1407 |
break; |
| 1408 |
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| 1409 |
ret = bq24190_charger_set_iinlimit(bdi, val); |
| 1410 |
break; |
| 1411 |
default: |
| 1412 |
ret = -EINVAL; |
| 1413 |
} |
| 1414 |
|
| 1415 |
pm_runtime_put_autosuspend(bdi->dev); |
| 1416 |
|
| 1417 |
return ret; |
| 1418 |
} |
| 1419 |
|
| 1420 |
static int bq24190_charger_property_is_writeable(struct power_supply *psy, |
| 1421 |
enum power_supply_property psp) |
| 1422 |
{ |
| 1423 |
switch (psp) { |
| 1424 |
case POWER_SUPPLY_PROP_ONLINE: |
| 1425 |
case POWER_SUPPLY_PROP_TEMP_ALERT_MAX: |
| 1426 |
case POWER_SUPPLY_PROP_CHARGE_TYPE: |
| 1427 |
case POWER_SUPPLY_PROP_CHARGE_TYPES: |
| 1428 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: |
| 1429 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: |
| 1430 |
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| 1431 |
return 1; |
| 1432 |
default: |
| 1433 |
return 0; |
| 1434 |
} |
| 1435 |
} |
| 1436 |
|
| 1437 |
static void bq24190_input_current_limit_work(struct work_struct *work) |
| 1438 |
{ |
| 1439 |
struct bq24190_dev_info *bdi = |
| 1440 |
container_of(work, struct bq24190_dev_info, |
| 1441 |
input_current_limit_work.work); |
| 1442 |
union power_supply_propval val; |
| 1443 |
int ret; |
| 1444 |
|
| 1445 |
ret = power_supply_get_property_from_supplier(bdi->charger, |
| 1446 |
POWER_SUPPLY_PROP_CURRENT_MAX, |
| 1447 |
&val); |
| 1448 |
if (ret) |
| 1449 |
return; |
| 1450 |
|
| 1451 |
bq24190_charger_set_property(bdi->charger, |
| 1452 |
POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, |
| 1453 |
&val); |
| 1454 |
power_supply_changed(bdi->charger); |
| 1455 |
} |
| 1456 |
|
| 1457 |
/* Sync the input-current-limit with our parent supply (if we have one) */ |
| 1458 |
static void bq24190_charger_external_power_changed(struct power_supply *psy) |
| 1459 |
{ |
| 1460 |
struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy); |
| 1461 |
|
| 1462 |
/* |
| 1463 |
* The Power-Good detection may take up to 220ms, sometimes |
| 1464 |
* the external charger detection is quicker, and the bq24190 will |
| 1465 |
* reset to iinlim based on its own charger detection (which is not |
| 1466 |
* hooked up when using external charger detection) resulting in a |
| 1467 |
* too low default 500mA iinlim. Delay setting the input-current-limit |
| 1468 |
* for 300ms to avoid this. |
| 1469 |
*/ |
| 1470 |
queue_delayed_work(system_percpu_wq, &bdi->input_current_limit_work, |
| 1471 |
msecs_to_jiffies(300)); |
| 1472 |
} |
| 1473 |
|
| 1474 |
static enum power_supply_property bq24190_charger_properties[] = { |
| 1475 |
POWER_SUPPLY_PROP_CHARGE_TYPE, |
| 1476 |
POWER_SUPPLY_PROP_CHARGE_TYPES, |
| 1477 |
POWER_SUPPLY_PROP_HEALTH, |
| 1478 |
POWER_SUPPLY_PROP_ONLINE, |
| 1479 |
POWER_SUPPLY_PROP_STATUS, |
| 1480 |
POWER_SUPPLY_PROP_TEMP_ALERT_MAX, |
| 1481 |
POWER_SUPPLY_PROP_PRECHARGE_CURRENT, |
| 1482 |
POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT, |
| 1483 |
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, |
| 1484 |
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, |
| 1485 |
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, |
| 1486 |
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, |
| 1487 |
POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, |
| 1488 |
POWER_SUPPLY_PROP_SCOPE, |
| 1489 |
POWER_SUPPLY_PROP_MODEL_NAME, |
| 1490 |
POWER_SUPPLY_PROP_MANUFACTURER, |
| 1491 |
}; |
| 1492 |
|
| 1493 |
static char *bq24190_charger_supplied_to[] = { |
| 1494 |
"main-battery", |
| 1495 |
}; |
| 1496 |
|
| 1497 |
static const struct power_supply_desc bq24190_charger_desc = { |
| 1498 |
.name = "bq24190-charger", |
| 1499 |
.type = POWER_SUPPLY_TYPE_USB, |
| 1500 |
.properties = bq24190_charger_properties, |
| 1501 |
.num_properties = ARRAY_SIZE(bq24190_charger_properties), |
| 1502 |
.get_property = bq24190_charger_get_property, |
| 1503 |
.set_property = bq24190_charger_set_property, |
| 1504 |
.property_is_writeable = bq24190_charger_property_is_writeable, |
| 1505 |
.external_power_changed = bq24190_charger_external_power_changed, |
| 1506 |
.charge_types = BIT(POWER_SUPPLY_CHARGE_TYPE_NONE) | |
| 1507 |
BIT(POWER_SUPPLY_CHARGE_TYPE_TRICKLE) | |
| 1508 |
BIT(POWER_SUPPLY_CHARGE_TYPE_FAST), |
| 1509 |
}; |
| 1510 |
|
| 1511 |
/* Battery power supply property routines */ |
| 1512 |
|
| 1513 |
static int bq24190_battery_get_status(struct bq24190_dev_info *bdi, |
| 1514 |
union power_supply_propval *val) |
| 1515 |
{ |
| 1516 |
u8 ss_reg, chrg_fault; |
| 1517 |
int status, ret; |
| 1518 |
|
| 1519 |
mutex_lock(&bdi->f_reg_lock); |
| 1520 |
chrg_fault = bdi->f_reg; |
| 1521 |
mutex_unlock(&bdi->f_reg_lock); |
| 1522 |
|
| 1523 |
chrg_fault &= BQ24190_REG_F_CHRG_FAULT_MASK; |
| 1524 |
chrg_fault >>= BQ24190_REG_F_CHRG_FAULT_SHIFT; |
| 1525 |
|
| 1526 |
ret = bq24190_read(bdi, BQ24190_REG_SS, &ss_reg); |
| 1527 |
if (ret < 0) |
| 1528 |
return ret; |
| 1529 |
|
| 1530 |
/* |
| 1531 |
* The battery must be discharging when any of these are true: |
| 1532 |
* - there is no good power source; |
| 1533 |
* - there is a charge fault. |
| 1534 |
* Could also be discharging when in "supplement mode" but |
| 1535 |
* there is no way to tell when its in that mode. |
| 1536 |
*/ |
| 1537 |
if (!(ss_reg & BQ24190_REG_SS_PG_STAT_MASK) || chrg_fault) { |
| 1538 |
status = POWER_SUPPLY_STATUS_DISCHARGING; |
| 1539 |
} else { |
| 1540 |
ss_reg &= BQ24190_REG_SS_CHRG_STAT_MASK; |
| 1541 |
ss_reg >>= BQ24190_REG_SS_CHRG_STAT_SHIFT; |
| 1542 |
|
| 1543 |
switch (ss_reg) { |
| 1544 |
case 0x0: /* Not Charging */ |
| 1545 |
status = POWER_SUPPLY_STATUS_NOT_CHARGING; |
| 1546 |
break; |
| 1547 |
case 0x1: /* Pre-charge */ |
| 1548 |
case 0x2: /* Fast Charging */ |
| 1549 |
status = POWER_SUPPLY_STATUS_CHARGING; |
| 1550 |
break; |
| 1551 |
case 0x3: /* Charge Termination Done */ |
| 1552 |
status = POWER_SUPPLY_STATUS_FULL; |
| 1553 |
break; |
| 1554 |
default: |
| 1555 |
ret = -EIO; |
| 1556 |
} |
| 1557 |
} |
| 1558 |
|
| 1559 |
if (!ret) |
| 1560 |
val->intval = status; |
| 1561 |
|
| 1562 |
return ret; |
| 1563 |
} |
| 1564 |
|
| 1565 |
static int bq24190_battery_get_health(struct bq24190_dev_info *bdi, |
| 1566 |
union power_supply_propval *val) |
| 1567 |
{ |
| 1568 |
u8 v; |
| 1569 |
int health; |
| 1570 |
|
| 1571 |
mutex_lock(&bdi->f_reg_lock); |
| 1572 |
v = bdi->f_reg; |
| 1573 |
mutex_unlock(&bdi->f_reg_lock); |
| 1574 |
|
| 1575 |
if (v & BQ24190_REG_F_BAT_FAULT_MASK) { |
| 1576 |
health = POWER_SUPPLY_HEALTH_OVERVOLTAGE; |
| 1577 |
} else { |
| 1578 |
v &= bdi->info->ntc_fault_mask; |
| 1579 |
|
| 1580 |
health = v ? bdi->info->get_ntc_status(v) : POWER_SUPPLY_HEALTH_GOOD; |
| 1581 |
} |
| 1582 |
|
| 1583 |
val->intval = health; |
| 1584 |
return 0; |
| 1585 |
} |
| 1586 |
|
| 1587 |
static int bq24190_battery_get_online(struct bq24190_dev_info *bdi, |
| 1588 |
union power_supply_propval *val) |
| 1589 |
{ |
| 1590 |
u8 batfet_disable; |
| 1591 |
int ret; |
| 1592 |
|
| 1593 |
ret = bq24190_read_mask(bdi, BQ24190_REG_MOC, |
| 1594 |
BQ24190_REG_MOC_BATFET_DISABLE_MASK, |
| 1595 |
BQ24190_REG_MOC_BATFET_DISABLE_SHIFT, &batfet_disable); |
| 1596 |
if (ret < 0) |
| 1597 |
return ret; |
| 1598 |
|
| 1599 |
val->intval = !batfet_disable; |
| 1600 |
return 0; |
| 1601 |
} |
| 1602 |
|
| 1603 |
static int bq24190_battery_set_online(struct bq24190_dev_info *bdi, |
| 1604 |
const union power_supply_propval *val) |
| 1605 |
{ |
| 1606 |
return bq24190_write_mask(bdi, BQ24190_REG_MOC, |
| 1607 |
BQ24190_REG_MOC_BATFET_DISABLE_MASK, |
| 1608 |
BQ24190_REG_MOC_BATFET_DISABLE_SHIFT, !val->intval); |
| 1609 |
} |
| 1610 |
|
| 1611 |
static int bq24190_battery_get_temp_alert_max(struct bq24190_dev_info *bdi, |
| 1612 |
union power_supply_propval *val) |
| 1613 |
{ |
| 1614 |
int temp, ret; |
| 1615 |
|
| 1616 |
ret = bq24190_get_field_val(bdi, BQ24190_REG_ICTRC, |
| 1617 |
BQ24190_REG_ICTRC_TREG_MASK, |
| 1618 |
BQ24190_REG_ICTRC_TREG_SHIFT, |
| 1619 |
bq24190_ictrc_treg_values, |
| 1620 |
ARRAY_SIZE(bq24190_ictrc_treg_values), &temp); |
| 1621 |
if (ret < 0) |
| 1622 |
return ret; |
| 1623 |
|
| 1624 |
val->intval = temp; |
| 1625 |
return 0; |
| 1626 |
} |
| 1627 |
|
| 1628 |
static int bq24190_battery_set_temp_alert_max(struct bq24190_dev_info *bdi, |
| 1629 |
const union power_supply_propval *val) |
| 1630 |
{ |
| 1631 |
return bq24190_set_field_val(bdi, BQ24190_REG_ICTRC, |
| 1632 |
BQ24190_REG_ICTRC_TREG_MASK, |
| 1633 |
BQ24190_REG_ICTRC_TREG_SHIFT, |
| 1634 |
bq24190_ictrc_treg_values, |
| 1635 |
ARRAY_SIZE(bq24190_ictrc_treg_values), val->intval); |
| 1636 |
} |
| 1637 |
|
| 1638 |
static int bq24190_battery_get_property(struct power_supply *psy, |
| 1639 |
enum power_supply_property psp, union power_supply_propval *val) |
| 1640 |
{ |
| 1641 |
struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy); |
| 1642 |
int ret; |
| 1643 |
|
| 1644 |
dev_warn(bdi->dev, "warning: /sys/class/power_supply/bq24190-battery is deprecated\n"); |
| 1645 |
dev_dbg(bdi->dev, "prop: %d\n", psp); |
| 1646 |
|
| 1647 |
ret = pm_runtime_resume_and_get(bdi->dev); |
| 1648 |
if (ret < 0) |
| 1649 |
return ret; |
| 1650 |
|
| 1651 |
switch (psp) { |
| 1652 |
case POWER_SUPPLY_PROP_STATUS: |
| 1653 |
ret = bq24190_battery_get_status(bdi, val); |
| 1654 |
break; |
| 1655 |
case POWER_SUPPLY_PROP_HEALTH: |
| 1656 |
ret = bq24190_battery_get_health(bdi, val); |
| 1657 |
break; |
| 1658 |
case POWER_SUPPLY_PROP_ONLINE: |
| 1659 |
ret = bq24190_battery_get_online(bdi, val); |
| 1660 |
break; |
| 1661 |
case POWER_SUPPLY_PROP_TECHNOLOGY: |
| 1662 |
/* Could be Li-on or Li-polymer but no way to tell which */ |
| 1663 |
val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN; |
| 1664 |
ret = 0; |
| 1665 |
break; |
| 1666 |
case POWER_SUPPLY_PROP_TEMP_ALERT_MAX: |
| 1667 |
ret = bq24190_battery_get_temp_alert_max(bdi, val); |
| 1668 |
break; |
| 1669 |
case POWER_SUPPLY_PROP_SCOPE: |
| 1670 |
val->intval = POWER_SUPPLY_SCOPE_SYSTEM; |
| 1671 |
ret = 0; |
| 1672 |
break; |
| 1673 |
default: |
| 1674 |
ret = -ENODATA; |
| 1675 |
} |
| 1676 |
|
| 1677 |
pm_runtime_put_autosuspend(bdi->dev); |
| 1678 |
|
| 1679 |
return ret; |
| 1680 |
} |
| 1681 |
|
| 1682 |
static int bq24190_battery_set_property(struct power_supply *psy, |
| 1683 |
enum power_supply_property psp, |
| 1684 |
const union power_supply_propval *val) |
| 1685 |
{ |
| 1686 |
struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy); |
| 1687 |
int ret; |
| 1688 |
|
| 1689 |
dev_warn(bdi->dev, "warning: /sys/class/power_supply/bq24190-battery is deprecated\n"); |
| 1690 |
dev_dbg(bdi->dev, "prop: %d\n", psp); |
| 1691 |
|
| 1692 |
ret = pm_runtime_resume_and_get(bdi->dev); |
| 1693 |
if (ret < 0) |
| 1694 |
return ret; |
| 1695 |
|
| 1696 |
switch (psp) { |
| 1697 |
case POWER_SUPPLY_PROP_ONLINE: |
| 1698 |
ret = bq24190_battery_set_online(bdi, val); |
| 1699 |
break; |
| 1700 |
case POWER_SUPPLY_PROP_TEMP_ALERT_MAX: |
| 1701 |
ret = bq24190_battery_set_temp_alert_max(bdi, val); |
| 1702 |
break; |
| 1703 |
default: |
| 1704 |
ret = -EINVAL; |
| 1705 |
} |
| 1706 |
|
| 1707 |
pm_runtime_put_autosuspend(bdi->dev); |
| 1708 |
|
| 1709 |
return ret; |
| 1710 |
} |
| 1711 |
|
| 1712 |
static int bq24190_battery_property_is_writeable(struct power_supply *psy, |
| 1713 |
enum power_supply_property psp) |
| 1714 |
{ |
| 1715 |
int ret; |
| 1716 |
|
| 1717 |
switch (psp) { |
| 1718 |
case POWER_SUPPLY_PROP_ONLINE: |
| 1719 |
case POWER_SUPPLY_PROP_TEMP_ALERT_MAX: |
| 1720 |
ret = 1; |
| 1721 |
break; |
| 1722 |
default: |
| 1723 |
ret = 0; |
| 1724 |
} |
| 1725 |
|
| 1726 |
return ret; |
| 1727 |
} |
| 1728 |
|
| 1729 |
static enum power_supply_property bq24190_battery_properties[] = { |
| 1730 |
POWER_SUPPLY_PROP_STATUS, |
| 1731 |
POWER_SUPPLY_PROP_HEALTH, |
| 1732 |
POWER_SUPPLY_PROP_ONLINE, |
| 1733 |
POWER_SUPPLY_PROP_TECHNOLOGY, |
| 1734 |
POWER_SUPPLY_PROP_TEMP_ALERT_MAX, |
| 1735 |
POWER_SUPPLY_PROP_SCOPE, |
| 1736 |
}; |
| 1737 |
|
| 1738 |
static const struct power_supply_desc bq24190_battery_desc = { |
| 1739 |
.name = "bq24190-battery", |
| 1740 |
.type = POWER_SUPPLY_TYPE_BATTERY, |
| 1741 |
.properties = bq24190_battery_properties, |
| 1742 |
.num_properties = ARRAY_SIZE(bq24190_battery_properties), |
| 1743 |
.get_property = bq24190_battery_get_property, |
| 1744 |
.set_property = bq24190_battery_set_property, |
| 1745 |
.property_is_writeable = bq24190_battery_property_is_writeable, |
| 1746 |
}; |
| 1747 |
|
| 1748 |
static int bq24190_configure_usb_otg(struct bq24190_dev_info *bdi, u8 ss_reg) |
| 1749 |
{ |
| 1750 |
bool otg_enabled; |
| 1751 |
int ret; |
| 1752 |
|
| 1753 |
otg_enabled = !!(ss_reg & BQ24190_REG_SS_VBUS_STAT_MASK); |
| 1754 |
ret = extcon_set_state_sync(bdi->edev, EXTCON_USB, otg_enabled); |
| 1755 |
if (ret < 0) |
| 1756 |
dev_err(bdi->dev, "Can't set extcon state to %d: %d\n", |
| 1757 |
otg_enabled, ret); |
| 1758 |
|
| 1759 |
return ret; |
| 1760 |
} |
| 1761 |
|
| 1762 |
static void bq24190_check_status(struct bq24190_dev_info *bdi) |
| 1763 |
{ |
| 1764 |
const u8 battery_mask_ss = BQ24190_REG_SS_CHRG_STAT_MASK; |
| 1765 |
u8 battery_mask_f = BQ24190_REG_F_BAT_FAULT_MASK; |
| 1766 |
bool alert_charger = false, alert_battery = false; |
| 1767 |
u8 ss_reg = 0, f_reg = 0; |
| 1768 |
int i, ret; |
| 1769 |
|
| 1770 |
battery_mask_f |= bdi->info->ntc_fault_mask; |
| 1771 |
|
| 1772 |
ret = bq24190_read(bdi, BQ24190_REG_SS, &ss_reg); |
| 1773 |
if (ret < 0) { |
| 1774 |
dev_err(bdi->dev, "Can't read SS reg: %d\n", ret); |
| 1775 |
return; |
| 1776 |
} |
| 1777 |
|
| 1778 |
i = 0; |
| 1779 |
do { |
| 1780 |
ret = bq24190_read(bdi, BQ24190_REG_F, &f_reg); |
| 1781 |
if (ret < 0) { |
| 1782 |
dev_err(bdi->dev, "Can't read F reg: %d\n", ret); |
| 1783 |
return; |
| 1784 |
} |
| 1785 |
} while (f_reg && ++i < 2); |
| 1786 |
|
| 1787 |
/* ignore over/under voltage fault after disconnect */ |
| 1788 |
if (f_reg == (1 << BQ24190_REG_F_CHRG_FAULT_SHIFT) && |
| 1789 |
!(ss_reg & BQ24190_REG_SS_PG_STAT_MASK)) |
| 1790 |
f_reg = 0; |
| 1791 |
|
| 1792 |
if (f_reg != bdi->f_reg) { |
| 1793 |
dev_warn(bdi->dev, |
| 1794 |
"Fault: boost %d, charge %d, battery %d, ntc %d\n", |
| 1795 |
!!(f_reg & BQ24190_REG_F_BOOST_FAULT_MASK), |
| 1796 |
!!(f_reg & BQ24190_REG_F_CHRG_FAULT_MASK), |
| 1797 |
!!(f_reg & BQ24190_REG_F_BAT_FAULT_MASK), |
| 1798 |
!!(f_reg & bdi->info->ntc_fault_mask)); |
| 1799 |
|
| 1800 |
mutex_lock(&bdi->f_reg_lock); |
| 1801 |
if ((bdi->f_reg & battery_mask_f) != (f_reg & battery_mask_f)) |
| 1802 |
alert_battery = true; |
| 1803 |
if ((bdi->f_reg & ~battery_mask_f) != (f_reg & ~battery_mask_f)) |
| 1804 |
alert_charger = true; |
| 1805 |
bdi->f_reg = f_reg; |
| 1806 |
mutex_unlock(&bdi->f_reg_lock); |
| 1807 |
} |
| 1808 |
|
| 1809 |
if (ss_reg != bdi->ss_reg) { |
| 1810 |
/* |
| 1811 |
* The device is in host mode so when PG_STAT goes from 1->0 |
| 1812 |
* (i.e., power removed) HIZ needs to be disabled. |
| 1813 |
*/ |
| 1814 |
if ((bdi->ss_reg & BQ24190_REG_SS_PG_STAT_MASK) && |
| 1815 |
!(ss_reg & BQ24190_REG_SS_PG_STAT_MASK)) { |
| 1816 |
ret = bq24190_write_mask(bdi, BQ24190_REG_ISC, |
| 1817 |
BQ24190_REG_ISC_EN_HIZ_MASK, |
| 1818 |
BQ24190_REG_ISC_EN_HIZ_SHIFT, |
| 1819 |
0); |
| 1820 |
if (ret < 0) |
| 1821 |
dev_err(bdi->dev, "Can't access ISC reg: %d\n", |
| 1822 |
ret); |
| 1823 |
} |
| 1824 |
|
| 1825 |
if ((bdi->ss_reg & battery_mask_ss) != (ss_reg & battery_mask_ss)) |
| 1826 |
alert_battery = true; |
| 1827 |
if ((bdi->ss_reg & ~battery_mask_ss) != (ss_reg & ~battery_mask_ss)) |
| 1828 |
alert_charger = true; |
| 1829 |
bdi->ss_reg = ss_reg; |
| 1830 |
} |
| 1831 |
|
| 1832 |
if (alert_charger || alert_battery) { |
| 1833 |
power_supply_changed(bdi->charger); |
| 1834 |
bq24190_configure_usb_otg(bdi, ss_reg); |
| 1835 |
} |
| 1836 |
if (alert_battery && bdi->battery) |
| 1837 |
power_supply_changed(bdi->battery); |
| 1838 |
|
| 1839 |
dev_dbg(bdi->dev, "ss_reg: 0x%02x, f_reg: 0x%02x\n", ss_reg, f_reg); |
| 1840 |
} |
| 1841 |
|
| 1842 |
static irqreturn_t bq24190_irq_handler_thread(int irq, void *data) |
| 1843 |
{ |
| 1844 |
struct bq24190_dev_info *bdi = data; |
| 1845 |
int error; |
| 1846 |
|
| 1847 |
bdi->irq_event = true; |
| 1848 |
error = pm_runtime_resume_and_get(bdi->dev); |
| 1849 |
if (error < 0) { |
| 1850 |
dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error); |
| 1851 |
return IRQ_NONE; |
| 1852 |
} |
| 1853 |
bq24190_check_status(bdi); |
| 1854 |
pm_runtime_put_autosuspend(bdi->dev); |
| 1855 |
bdi->irq_event = false; |
| 1856 |
|
| 1857 |
return IRQ_HANDLED; |
| 1858 |
} |
| 1859 |
|
| 1860 |
static int bq24190_check_chip(struct bq24190_dev_info *bdi) |
| 1861 |
{ |
| 1862 |
u8 v; |
| 1863 |
int ret; |
| 1864 |
|
| 1865 |
ret = bq24190_read_mask(bdi, BQ24190_REG_VPRS, |
| 1866 |
BQ24190_REG_VPRS_PN_MASK, |
| 1867 |
BQ24190_REG_VPRS_PN_SHIFT, |
| 1868 |
&v); |
| 1869 |
if (ret < 0) |
| 1870 |
return ret; |
| 1871 |
|
| 1872 |
switch (v) { |
| 1873 |
case BQ24190_REG_VPRS_PN_24190: |
| 1874 |
case BQ24190_REG_VPRS_PN_24192: |
| 1875 |
case BQ24190_REG_VPRS_PN_24192I: |
| 1876 |
break; |
| 1877 |
default: |
| 1878 |
dev_err(bdi->dev, "Error unknown model: 0x%02x\n", v); |
| 1879 |
return -ENODEV; |
| 1880 |
} |
| 1881 |
|
| 1882 |
return 0; |
| 1883 |
} |
| 1884 |
|
| 1885 |
static int bq24296_check_chip(struct bq24190_dev_info *bdi) |
| 1886 |
{ |
| 1887 |
u8 v; |
| 1888 |
int ret; |
| 1889 |
|
| 1890 |
ret = bq24190_read_mask(bdi, BQ24190_REG_VPRS, |
| 1891 |
BQ24296_REG_VPRS_PN_MASK, |
| 1892 |
BQ24296_REG_VPRS_PN_SHIFT, |
| 1893 |
&v); |
| 1894 |
if (ret < 0) |
| 1895 |
return ret; |
| 1896 |
|
| 1897 |
switch (v) { |
| 1898 |
case BQ24296_REG_VPRS_PN_24296: |
| 1899 |
case BQ24296_REG_VPRS_PN_24297: |
| 1900 |
break; |
| 1901 |
default: |
| 1902 |
dev_err(bdi->dev, "Error unknown model: 0x%02x\n", v); |
| 1903 |
return -ENODEV; |
| 1904 |
} |
| 1905 |
|
| 1906 |
return 0; |
| 1907 |
} |
| 1908 |
|
| 1909 |
static int bq24190_hw_init(struct bq24190_dev_info *bdi) |
| 1910 |
{ |
| 1911 |
int ret; |
| 1912 |
|
| 1913 |
ret = bdi->info->check_chip(bdi); |
| 1914 |
if (ret < 0) |
| 1915 |
return ret; |
| 1916 |
|
| 1917 |
ret = bq24190_register_reset(bdi); |
| 1918 |
if (ret < 0) |
| 1919 |
return ret; |
| 1920 |
|
| 1921 |
ret = bq24190_set_config(bdi); |
| 1922 |
if (ret < 0) |
| 1923 |
return ret; |
| 1924 |
|
| 1925 |
return bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg); |
| 1926 |
} |
| 1927 |
|
| 1928 |
static int bq24190_get_config(struct bq24190_dev_info *bdi) |
| 1929 |
{ |
| 1930 |
const char * const s = "ti,system-minimum-microvolt"; |
| 1931 |
struct power_supply_battery_info *info; |
| 1932 |
int v, idx; |
| 1933 |
|
| 1934 |
idx = bdi->info->ichg_array_size - 1; |
| 1935 |
|
| 1936 |
bdi->ichg_max = bq24190_ccc_ichg_values[idx]; |
| 1937 |
|
| 1938 |
idx = ARRAY_SIZE(bq24190_cvc_vreg_values) - 1; |
| 1939 |
bdi->vreg_max = bq24190_cvc_vreg_values[idx]; |
| 1940 |
|
| 1941 |
if (device_property_read_u32(bdi->dev, s, &v) == 0) { |
| 1942 |
v /= 1000; |
| 1943 |
if (v >= BQ24190_REG_POC_SYS_MIN_MIN |
| 1944 |
&& v <= BQ24190_REG_POC_SYS_MIN_MAX) |
| 1945 |
bdi->sys_min = v; |
| 1946 |
else |
| 1947 |
dev_warn(bdi->dev, "invalid value for %s: %u\n", s, v); |
| 1948 |
} |
| 1949 |
|
| 1950 |
if (!power_supply_get_battery_info(bdi->charger, &info)) { |
| 1951 |
v = info->precharge_current_ua / 1000; |
| 1952 |
if (v >= BQ24190_REG_PCTCC_IPRECHG_MIN |
| 1953 |
&& v <= BQ24190_REG_PCTCC_IPRECHG_MAX) |
| 1954 |
bdi->iprechg = v; |
| 1955 |
else |
| 1956 |
dev_warn(bdi->dev, "invalid value for battery:precharge-current-microamp: %d\n", |
| 1957 |
v); |
| 1958 |
|
| 1959 |
v = info->charge_term_current_ua / 1000; |
| 1960 |
if (v >= BQ24190_REG_PCTCC_ITERM_MIN |
| 1961 |
&& v <= BQ24190_REG_PCTCC_ITERM_MAX) |
| 1962 |
bdi->iterm = v; |
| 1963 |
else |
| 1964 |
dev_warn(bdi->dev, "invalid value for battery:charge-term-current-microamp: %d\n", |
| 1965 |
v); |
| 1966 |
|
| 1967 |
/* These are optional, so no warning when not set */ |
| 1968 |
v = info->constant_charge_current_max_ua; |
| 1969 |
if (v >= bq24190_ccc_ichg_values[0] && v <= bdi->ichg_max) |
| 1970 |
bdi->ichg = bdi->ichg_max = v; |
| 1971 |
|
| 1972 |
v = info->constant_charge_voltage_max_uv; |
| 1973 |
if (v >= bq24190_cvc_vreg_values[0] && v <= bdi->vreg_max) |
| 1974 |
bdi->vreg = bdi->vreg_max = v; |
| 1975 |
|
| 1976 |
power_supply_put_battery_info(bdi->charger, info); |
| 1977 |
} |
| 1978 |
|
| 1979 |
return 0; |
| 1980 |
} |
| 1981 |
|
| 1982 |
static const struct bq24190_chip_info bq24190_chip_info_tbl[] = { |
| 1983 |
[BQ24190] = { |
| 1984 |
.ichg_array_size = ARRAY_SIZE(bq24190_ccc_ichg_values), |
| 1985 |
#ifdef CONFIG_REGULATOR |
| 1986 |
.vbus_desc = &bq24190_vbus_desc, |
| 1987 |
#endif |
| 1988 |
.check_chip = bq24190_check_chip, |
| 1989 |
.set_chg_config = bq24190_battery_set_chg_config, |
| 1990 |
.ntc_fault_mask = BQ24190_REG_F_NTC_FAULT_MASK, |
| 1991 |
.get_ntc_status = bq24190_charger_get_ntc_status, |
| 1992 |
.set_otg_vbus = bq24190_set_otg_vbus, |
| 1993 |
}, |
| 1994 |
[BQ24192] = { |
| 1995 |
.ichg_array_size = ARRAY_SIZE(bq24190_ccc_ichg_values), |
| 1996 |
#ifdef CONFIG_REGULATOR |
| 1997 |
.vbus_desc = &bq24190_vbus_desc, |
| 1998 |
#endif |
| 1999 |
.check_chip = bq24190_check_chip, |
| 2000 |
.set_chg_config = bq24190_battery_set_chg_config, |
| 2001 |
.ntc_fault_mask = BQ24190_REG_F_NTC_FAULT_MASK, |
| 2002 |
.get_ntc_status = bq24190_charger_get_ntc_status, |
| 2003 |
.set_otg_vbus = bq24190_set_otg_vbus, |
| 2004 |
}, |
| 2005 |
[BQ24192i] = { |
| 2006 |
.ichg_array_size = ARRAY_SIZE(bq24190_ccc_ichg_values), |
| 2007 |
#ifdef CONFIG_REGULATOR |
| 2008 |
.vbus_desc = &bq24190_vbus_desc, |
| 2009 |
#endif |
| 2010 |
.check_chip = bq24190_check_chip, |
| 2011 |
.set_chg_config = bq24190_battery_set_chg_config, |
| 2012 |
.ntc_fault_mask = BQ24190_REG_F_NTC_FAULT_MASK, |
| 2013 |
.get_ntc_status = bq24190_charger_get_ntc_status, |
| 2014 |
.set_otg_vbus = bq24190_set_otg_vbus, |
| 2015 |
}, |
| 2016 |
[BQ24193] = { |
| 2017 |
.ichg_array_size = ARRAY_SIZE(bq24190_ccc_ichg_values), |
| 2018 |
#ifdef CONFIG_REGULATOR |
| 2019 |
.vbus_desc = &bq24190_vbus_desc, |
| 2020 |
#endif |
| 2021 |
.check_chip = bq24190_check_chip, |
| 2022 |
.set_chg_config = bq24190_battery_set_chg_config, |
| 2023 |
.ntc_fault_mask = BQ24190_REG_F_NTC_FAULT_MASK, |
| 2024 |
.get_ntc_status = bq24190_charger_get_ntc_status, |
| 2025 |
.set_otg_vbus = bq24190_set_otg_vbus, |
| 2026 |
}, |
| 2027 |
[BQ24196] = { |
| 2028 |
.ichg_array_size = ARRAY_SIZE(bq24190_ccc_ichg_values), |
| 2029 |
#ifdef CONFIG_REGULATOR |
| 2030 |
.vbus_desc = &bq24190_vbus_desc, |
| 2031 |
#endif |
| 2032 |
.check_chip = bq24190_check_chip, |
| 2033 |
.set_chg_config = bq24190_battery_set_chg_config, |
| 2034 |
.ntc_fault_mask = BQ24190_REG_F_NTC_FAULT_MASK, |
| 2035 |
.get_ntc_status = bq24190_charger_get_ntc_status, |
| 2036 |
.set_otg_vbus = bq24190_set_otg_vbus, |
| 2037 |
}, |
| 2038 |
[BQ24296] = { |
| 2039 |
.ichg_array_size = BQ24296_CCC_ICHG_VALUES_LEN, |
| 2040 |
#ifdef CONFIG_REGULATOR |
| 2041 |
.vbus_desc = &bq24296_vbus_desc, |
| 2042 |
#endif |
| 2043 |
.check_chip = bq24296_check_chip, |
| 2044 |
.set_chg_config = bq24296_battery_set_chg_config, |
| 2045 |
.ntc_fault_mask = BQ24296_REG_F_NTC_FAULT_MASK, |
| 2046 |
.get_ntc_status = bq24296_charger_get_ntc_status, |
| 2047 |
.set_otg_vbus = bq24296_set_otg_vbus, |
| 2048 |
}, |
| 2049 |
[BQ24297] = { |
| 2050 |
.ichg_array_size = BQ24296_CCC_ICHG_VALUES_LEN, |
| 2051 |
#ifdef CONFIG_REGULATOR |
| 2052 |
.vbus_desc = &bq24296_vbus_desc, |
| 2053 |
#endif |
| 2054 |
.check_chip = bq24296_check_chip, |
| 2055 |
.set_chg_config = bq24296_battery_set_chg_config, |
| 2056 |
.ntc_fault_mask = BQ24296_REG_F_NTC_FAULT_MASK, |
| 2057 |
.get_ntc_status = bq24296_charger_get_ntc_status, |
| 2058 |
.set_otg_vbus = bq24296_set_otg_vbus, |
| 2059 |
}, |
| 2060 |
}; |
| 2061 |
|
| 2062 |
static int bq24190_probe(struct i2c_client *client) |
| 2063 |
{ |
| 2064 |
const struct i2c_device_id *id = i2c_client_get_device_id(client); |
| 2065 |
struct i2c_adapter *adapter = client->adapter; |
| 2066 |
struct device *dev = &client->dev; |
| 2067 |
struct power_supply_config charger_cfg = {}, battery_cfg = {}; |
| 2068 |
struct bq24190_dev_info *bdi; |
| 2069 |
int ret; |
| 2070 |
|
| 2071 |
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { |
| 2072 |
dev_err(dev, "No support for SMBUS_BYTE_DATA\n"); |
| 2073 |
return -ENODEV; |
| 2074 |
} |
| 2075 |
|
| 2076 |
bdi = devm_kzalloc(dev, sizeof(*bdi), GFP_KERNEL); |
| 2077 |
if (!bdi) { |
| 2078 |
dev_err(dev, "Can't alloc bdi struct\n"); |
| 2079 |
return -ENOMEM; |
| 2080 |
} |
| 2081 |
|
| 2082 |
bdi->client = client; |
| 2083 |
bdi->dev = dev; |
| 2084 |
strscpy(bdi->model_name, id->name, sizeof(bdi->model_name)); |
| 2085 |
bdi->info = i2c_get_match_data(client); |
| 2086 |
mutex_init(&bdi->f_reg_lock); |
| 2087 |
bdi->charge_type = POWER_SUPPLY_CHARGE_TYPE_FAST; |
| 2088 |
bdi->f_reg = 0; |
| 2089 |
bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK; /* impossible state */ |
| 2090 |
INIT_DELAYED_WORK(&bdi->input_current_limit_work, |
| 2091 |
bq24190_input_current_limit_work); |
| 2092 |
|
| 2093 |
i2c_set_clientdata(client, bdi); |
| 2094 |
|
| 2095 |
if (client->irq <= 0) { |
| 2096 |
dev_err(dev, "Can't get irq info\n"); |
| 2097 |
return -EINVAL; |
| 2098 |
} |
| 2099 |
|
| 2100 |
bdi->edev = devm_extcon_dev_allocate(dev, bq24190_usb_extcon_cable); |
| 2101 |
if (IS_ERR(bdi->edev)) |
| 2102 |
return PTR_ERR(bdi->edev); |
| 2103 |
|
| 2104 |
ret = devm_extcon_dev_register(dev, bdi->edev); |
| 2105 |
if (ret < 0) |
| 2106 |
return ret; |
| 2107 |
|
| 2108 |
pm_runtime_enable(dev); |
| 2109 |
pm_runtime_use_autosuspend(dev); |
| 2110 |
pm_runtime_set_autosuspend_delay(dev, 600); |
| 2111 |
ret = pm_runtime_get_sync(dev); |
| 2112 |
if (ret < 0) { |
| 2113 |
dev_err(dev, "pm_runtime_get failed: %i\n", ret); |
| 2114 |
goto out_pmrt; |
| 2115 |
} |
| 2116 |
|
| 2117 |
#ifdef CONFIG_SYSFS |
| 2118 |
bq24190_sysfs_init_attrs(); |
| 2119 |
charger_cfg.attr_grp = bq24190_sysfs_groups; |
| 2120 |
#endif |
| 2121 |
|
| 2122 |
charger_cfg.drv_data = bdi; |
| 2123 |
charger_cfg.fwnode = dev_fwnode(dev); |
| 2124 |
charger_cfg.supplied_to = bq24190_charger_supplied_to; |
| 2125 |
charger_cfg.num_supplicants = ARRAY_SIZE(bq24190_charger_supplied_to); |
| 2126 |
bdi->charger = power_supply_register(dev, &bq24190_charger_desc, |
| 2127 |
&charger_cfg); |
| 2128 |
if (IS_ERR(bdi->charger)) { |
| 2129 |
dev_err(dev, "Can't register charger\n"); |
| 2130 |
ret = PTR_ERR(bdi->charger); |
| 2131 |
goto out_pmrt; |
| 2132 |
} |
| 2133 |
|
| 2134 |
/* the battery class is deprecated and will be removed. */ |
| 2135 |
/* in the interim, this property hides it. */ |
| 2136 |
if (!device_property_read_bool(dev, "omit-battery-class")) { |
| 2137 |
battery_cfg.drv_data = bdi; |
| 2138 |
bdi->battery = power_supply_register(dev, &bq24190_battery_desc, |
| 2139 |
&battery_cfg); |
| 2140 |
if (IS_ERR(bdi->battery)) { |
| 2141 |
dev_err(dev, "Can't register battery\n"); |
| 2142 |
ret = PTR_ERR(bdi->battery); |
| 2143 |
goto out_charger; |
| 2144 |
} |
| 2145 |
} |
| 2146 |
|
| 2147 |
ret = bq24190_get_config(bdi); |
| 2148 |
if (ret < 0) { |
| 2149 |
dev_err(dev, "Can't get devicetree config\n"); |
| 2150 |
goto out_charger; |
| 2151 |
} |
| 2152 |
|
| 2153 |
ret = bq24190_hw_init(bdi); |
| 2154 |
if (ret < 0) { |
| 2155 |
dev_err(dev, "Hardware init failed\n"); |
| 2156 |
goto out_charger; |
| 2157 |
} |
| 2158 |
|
| 2159 |
ret = bq24190_configure_usb_otg(bdi, bdi->ss_reg); |
| 2160 |
if (ret < 0) |
| 2161 |
goto out_charger; |
| 2162 |
|
| 2163 |
bdi->initialized = true; |
| 2164 |
|
| 2165 |
ret = devm_request_threaded_irq(dev, client->irq, NULL, |
| 2166 |
bq24190_irq_handler_thread, |
| 2167 |
IRQF_TRIGGER_FALLING | IRQF_ONESHOT, |
| 2168 |
"bq24190-charger", bdi); |
| 2169 |
if (ret < 0) { |
| 2170 |
dev_err(dev, "Can't set up irq handler\n"); |
| 2171 |
goto out_charger; |
| 2172 |
} |
| 2173 |
|
| 2174 |
ret = bq24190_register_vbus_regulator(bdi); |
| 2175 |
if (ret < 0) |
| 2176 |
goto out_charger; |
| 2177 |
|
| 2178 |
enable_irq_wake(client->irq); |
| 2179 |
|
| 2180 |
pm_runtime_put_autosuspend(dev); |
| 2181 |
|
| 2182 |
return 0; |
| 2183 |
|
| 2184 |
out_charger: |
| 2185 |
if (!IS_ERR_OR_NULL(bdi->battery)) |
| 2186 |
power_supply_unregister(bdi->battery); |
| 2187 |
power_supply_unregister(bdi->charger); |
| 2188 |
|
| 2189 |
out_pmrt: |
| 2190 |
pm_runtime_put_sync(dev); |
| 2191 |
pm_runtime_dont_use_autosuspend(dev); |
| 2192 |
pm_runtime_disable(dev); |
| 2193 |
return ret; |
| 2194 |
} |
| 2195 |
|
| 2196 |
static void bq24190_remove(struct i2c_client *client) |
| 2197 |
{ |
| 2198 |
struct bq24190_dev_info *bdi = i2c_get_clientdata(client); |
| 2199 |
int error; |
| 2200 |
|
| 2201 |
cancel_delayed_work_sync(&bdi->input_current_limit_work); |
| 2202 |
error = pm_runtime_resume_and_get(bdi->dev); |
| 2203 |
if (error < 0) |
| 2204 |
dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error); |
| 2205 |
|
| 2206 |
bq24190_register_reset(bdi); |
| 2207 |
if (bdi->battery) |
| 2208 |
power_supply_unregister(bdi->battery); |
| 2209 |
power_supply_unregister(bdi->charger); |
| 2210 |
if (error >= 0) |
| 2211 |
pm_runtime_put_sync(bdi->dev); |
| 2212 |
pm_runtime_dont_use_autosuspend(bdi->dev); |
| 2213 |
pm_runtime_disable(bdi->dev); |
| 2214 |
} |
| 2215 |
|
| 2216 |
static void bq24190_shutdown(struct i2c_client *client) |
| 2217 |
{ |
| 2218 |
struct bq24190_dev_info *bdi = i2c_get_clientdata(client); |
| 2219 |
|
| 2220 |
/* Turn off 5V boost regulator on shutdown */ |
| 2221 |
bdi->info->set_otg_vbus(bdi, false); |
| 2222 |
} |
| 2223 |
|
| 2224 |
static __maybe_unused int bq24190_runtime_suspend(struct device *dev) |
| 2225 |
{ |
| 2226 |
struct i2c_client *client = to_i2c_client(dev); |
| 2227 |
struct bq24190_dev_info *bdi = i2c_get_clientdata(client); |
| 2228 |
|
| 2229 |
if (!bdi->initialized) |
| 2230 |
return 0; |
| 2231 |
|
| 2232 |
dev_dbg(bdi->dev, "%s\n", __func__); |
| 2233 |
|
| 2234 |
return 0; |
| 2235 |
} |
| 2236 |
|
| 2237 |
static __maybe_unused int bq24190_runtime_resume(struct device *dev) |
| 2238 |
{ |
| 2239 |
struct i2c_client *client = to_i2c_client(dev); |
| 2240 |
struct bq24190_dev_info *bdi = i2c_get_clientdata(client); |
| 2241 |
|
| 2242 |
if (!bdi->initialized) |
| 2243 |
return 0; |
| 2244 |
|
| 2245 |
if (!bdi->irq_event) { |
| 2246 |
dev_dbg(bdi->dev, "checking events on possible wakeirq\n"); |
| 2247 |
bq24190_check_status(bdi); |
| 2248 |
} |
| 2249 |
|
| 2250 |
return 0; |
| 2251 |
} |
| 2252 |
|
| 2253 |
static __maybe_unused int bq24190_pm_suspend(struct device *dev) |
| 2254 |
{ |
| 2255 |
struct i2c_client *client = to_i2c_client(dev); |
| 2256 |
struct bq24190_dev_info *bdi = i2c_get_clientdata(client); |
| 2257 |
int error; |
| 2258 |
|
| 2259 |
error = pm_runtime_resume_and_get(bdi->dev); |
| 2260 |
if (error < 0) |
| 2261 |
dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error); |
| 2262 |
|
| 2263 |
bq24190_register_reset(bdi); |
| 2264 |
|
| 2265 |
if (error >= 0) { |
| 2266 |
pm_runtime_put_autosuspend(bdi->dev); |
| 2267 |
} |
| 2268 |
|
| 2269 |
return 0; |
| 2270 |
} |
| 2271 |
|
| 2272 |
static __maybe_unused int bq24190_pm_resume(struct device *dev) |
| 2273 |
{ |
| 2274 |
struct i2c_client *client = to_i2c_client(dev); |
| 2275 |
struct bq24190_dev_info *bdi = i2c_get_clientdata(client); |
| 2276 |
int error; |
| 2277 |
|
| 2278 |
bdi->f_reg = 0; |
| 2279 |
bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK; /* impossible state */ |
| 2280 |
|
| 2281 |
error = pm_runtime_resume_and_get(bdi->dev); |
| 2282 |
if (error < 0) |
| 2283 |
dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error); |
| 2284 |
|
| 2285 |
bq24190_register_reset(bdi); |
| 2286 |
bq24190_set_config(bdi); |
| 2287 |
bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg); |
| 2288 |
|
| 2289 |
if (error >= 0) { |
| 2290 |
pm_runtime_put_autosuspend(bdi->dev); |
| 2291 |
} |
| 2292 |
|
| 2293 |
/* Things may have changed while suspended so alert upper layer */ |
| 2294 |
power_supply_changed(bdi->charger); |
| 2295 |
if (bdi->battery) |
| 2296 |
power_supply_changed(bdi->battery); |
| 2297 |
|
| 2298 |
return 0; |
| 2299 |
} |
| 2300 |
|
| 2301 |
static const struct dev_pm_ops bq24190_pm_ops = { |
| 2302 |
SET_RUNTIME_PM_OPS(bq24190_runtime_suspend, bq24190_runtime_resume, |
| 2303 |
NULL) |
| 2304 |
SET_SYSTEM_SLEEP_PM_OPS(bq24190_pm_suspend, bq24190_pm_resume) |
| 2305 |
}; |
| 2306 |
|
| 2307 |
static const struct i2c_device_id bq24190_i2c_ids[] = { |
| 2308 |
{ "bq24190", (kernel_ulong_t)&bq24190_chip_info_tbl[BQ24190] }, |
| 2309 |
{ "bq24192", (kernel_ulong_t)&bq24190_chip_info_tbl[BQ24192] }, |
| 2310 |
{ "bq24192i", (kernel_ulong_t)&bq24190_chip_info_tbl[BQ24192i] }, |
| 2311 |
{ "bq24193", (kernel_ulong_t)&bq24190_chip_info_tbl[BQ24193] }, |
| 2312 |
{ "bq24196", (kernel_ulong_t)&bq24190_chip_info_tbl[BQ24196] }, |
| 2313 |
{ "bq24296", (kernel_ulong_t)&bq24190_chip_info_tbl[BQ24296] }, |
| 2314 |
{ "bq24297", (kernel_ulong_t)&bq24190_chip_info_tbl[BQ24297] }, |
| 2315 |
{ }, |
| 2316 |
}; |
| 2317 |
MODULE_DEVICE_TABLE(i2c, bq24190_i2c_ids); |
| 2318 |
|
| 2319 |
static const struct of_device_id bq24190_of_match[] = { |
| 2320 |
{ .compatible = "ti,bq24190", .data = &bq24190_chip_info_tbl[BQ24190] }, |
| 2321 |
{ .compatible = "ti,bq24192", .data = &bq24190_chip_info_tbl[BQ24192] }, |
| 2322 |
{ .compatible = "ti,bq24192i", .data = &bq24190_chip_info_tbl[BQ24192i] }, |
| 2323 |
{ .compatible = "ti,bq24193", .data = &bq24190_chip_info_tbl[BQ24193] }, |
| 2324 |
{ .compatible = "ti,bq24196", .data = &bq24190_chip_info_tbl[BQ24196] }, |
| 2325 |
{ .compatible = "ti,bq24296", .data = &bq24190_chip_info_tbl[BQ24296] }, |
| 2326 |
{ .compatible = "ti,bq24297", .data = &bq24190_chip_info_tbl[BQ24297] }, |
| 2327 |
{ }, |
| 2328 |
}; |
| 2329 |
MODULE_DEVICE_TABLE(of, bq24190_of_match); |
| 2330 |
|
| 2331 |
static struct i2c_driver bq24190_driver = { |
| 2332 |
.probe = bq24190_probe, |
| 2333 |
.remove = bq24190_remove, |
| 2334 |
.shutdown = bq24190_shutdown, |
| 2335 |
.id_table = bq24190_i2c_ids, |
| 2336 |
.driver = { |
| 2337 |
.name = "bq24190-charger", |
| 2338 |
.pm = &bq24190_pm_ops, |
| 2339 |
.of_match_table = bq24190_of_match, |
| 2340 |
}, |
| 2341 |
}; |
| 2342 |
module_i2c_driver(bq24190_driver); |
| 2343 |
|
| 2344 |
MODULE_LICENSE("GPL"); |
| 2345 |
MODULE_AUTHOR("Mark A. Greer <[email protected]>"); |
| 2346 |
MODULE_DESCRIPTION("TI BQ24190 Charger Driver"); |