| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* ISP1704 USB Charger Detection driver |
| 4 |
* |
| 5 |
* Copyright (C) 2010 Nokia Corporation |
| 6 |
* Copyright (C) 2012 - 2013 Pali Rohár <[email protected]> |
| 7 |
*/ |
| 8 |
|
| 9 |
#include <linux/kernel.h> |
| 10 |
#include <linux/module.h> |
| 11 |
#include <linux/err.h> |
| 12 |
#include <linux/init.h> |
| 13 |
#include <linux/types.h> |
| 14 |
#include <linux/device.h> |
| 15 |
#include <linux/sysfs.h> |
| 16 |
#include <linux/platform_device.h> |
| 17 |
#include <linux/power_supply.h> |
| 18 |
#include <linux/delay.h> |
| 19 |
#include <linux/of.h> |
| 20 |
|
| 21 |
#include <linux/gpio/consumer.h> |
| 22 |
#include <linux/usb/otg.h> |
| 23 |
#include <linux/usb/ulpi.h> |
| 24 |
#include <linux/usb/ch9.h> |
| 25 |
#include <linux/usb/gadget.h> |
| 26 |
|
| 27 |
/* Vendor specific Power Control register */ |
| 28 |
#define ISP1704_PWR_CTRL 0x3d |
| 29 |
#define ISP1704_PWR_CTRL_SWCTRL (1 << 0) |
| 30 |
#define ISP1704_PWR_CTRL_DET_COMP (1 << 1) |
| 31 |
#define ISP1704_PWR_CTRL_BVALID_RISE (1 << 2) |
| 32 |
#define ISP1704_PWR_CTRL_BVALID_FALL (1 << 3) |
| 33 |
#define ISP1704_PWR_CTRL_DP_WKPU_EN (1 << 4) |
| 34 |
#define ISP1704_PWR_CTRL_VDAT_DET (1 << 5) |
| 35 |
#define ISP1704_PWR_CTRL_DPVSRC_EN (1 << 6) |
| 36 |
#define ISP1704_PWR_CTRL_HWDETECT (1 << 7) |
| 37 |
|
| 38 |
#define NXP_VENDOR_ID 0x04cc |
| 39 |
|
| 40 |
static u16 isp170x_id[] = { |
| 41 |
0x1704, |
| 42 |
0x1707, |
| 43 |
}; |
| 44 |
|
| 45 |
struct isp1704_charger { |
| 46 |
struct device *dev; |
| 47 |
struct power_supply *psy; |
| 48 |
struct power_supply_desc psy_desc; |
| 49 |
struct gpio_desc *enable_gpio; |
| 50 |
struct usb_phy *phy; |
| 51 |
struct notifier_block nb; |
| 52 |
struct work_struct work; |
| 53 |
|
| 54 |
/* properties */ |
| 55 |
char model[8]; |
| 56 |
unsigned present:1; |
| 57 |
unsigned online:1; |
| 58 |
unsigned current_max; |
| 59 |
}; |
| 60 |
|
| 61 |
static inline int isp1704_read(struct isp1704_charger *isp, u32 reg) |
| 62 |
{ |
| 63 |
return usb_phy_io_read(isp->phy, reg); |
| 64 |
} |
| 65 |
|
| 66 |
static inline int isp1704_write(struct isp1704_charger *isp, u32 reg, u32 val) |
| 67 |
{ |
| 68 |
return usb_phy_io_write(isp->phy, val, reg); |
| 69 |
} |
| 70 |
|
| 71 |
static void isp1704_charger_set_power(struct isp1704_charger *isp, bool on) |
| 72 |
{ |
| 73 |
gpiod_set_value(isp->enable_gpio, on); |
| 74 |
} |
| 75 |
|
| 76 |
/* |
| 77 |
* Determine is the charging port DCP (dedicated charger) or CDP (Host/HUB |
| 78 |
* chargers). |
| 79 |
* |
| 80 |
* REVISIT: The method is defined in Battery Charging Specification and is |
| 81 |
* applicable to any ULPI transceiver. Nothing isp170x specific here. |
| 82 |
*/ |
| 83 |
static inline int isp1704_charger_type(struct isp1704_charger *isp) |
| 84 |
{ |
| 85 |
u8 reg; |
| 86 |
u8 func_ctrl; |
| 87 |
u8 otg_ctrl; |
| 88 |
int type = POWER_SUPPLY_TYPE_USB_DCP; |
| 89 |
|
| 90 |
func_ctrl = isp1704_read(isp, ULPI_FUNC_CTRL); |
| 91 |
otg_ctrl = isp1704_read(isp, ULPI_OTG_CTRL); |
| 92 |
|
| 93 |
/* disable pulldowns */ |
| 94 |
reg = ULPI_OTG_CTRL_DM_PULLDOWN | ULPI_OTG_CTRL_DP_PULLDOWN; |
| 95 |
isp1704_write(isp, ULPI_CLR(ULPI_OTG_CTRL), reg); |
| 96 |
|
| 97 |
/* full speed */ |
| 98 |
isp1704_write(isp, ULPI_CLR(ULPI_FUNC_CTRL), |
| 99 |
ULPI_FUNC_CTRL_XCVRSEL_MASK); |
| 100 |
isp1704_write(isp, ULPI_SET(ULPI_FUNC_CTRL), |
| 101 |
ULPI_FUNC_CTRL_FULL_SPEED); |
| 102 |
|
| 103 |
/* Enable strong pull-up on DP (1.5K) and reset */ |
| 104 |
reg = ULPI_FUNC_CTRL_TERMSELECT | ULPI_FUNC_CTRL_RESET; |
| 105 |
isp1704_write(isp, ULPI_SET(ULPI_FUNC_CTRL), reg); |
| 106 |
usleep_range(1000, 2000); |
| 107 |
|
| 108 |
reg = isp1704_read(isp, ULPI_DEBUG); |
| 109 |
if ((reg & 3) != 3) |
| 110 |
type = POWER_SUPPLY_TYPE_USB_CDP; |
| 111 |
|
| 112 |
/* recover original state */ |
| 113 |
isp1704_write(isp, ULPI_FUNC_CTRL, func_ctrl); |
| 114 |
isp1704_write(isp, ULPI_OTG_CTRL, otg_ctrl); |
| 115 |
|
| 116 |
return type; |
| 117 |
} |
| 118 |
|
| 119 |
/* |
| 120 |
* ISP1704 detects PS/2 adapters as charger. To make sure the detected charger |
| 121 |
* is actually a dedicated charger, the following steps need to be taken. |
| 122 |
*/ |
| 123 |
static inline int isp1704_charger_verify(struct isp1704_charger *isp) |
| 124 |
{ |
| 125 |
int ret = 0; |
| 126 |
u8 r; |
| 127 |
|
| 128 |
/* Reset the transceiver */ |
| 129 |
r = isp1704_read(isp, ULPI_FUNC_CTRL); |
| 130 |
r |= ULPI_FUNC_CTRL_RESET; |
| 131 |
isp1704_write(isp, ULPI_FUNC_CTRL, r); |
| 132 |
usleep_range(1000, 2000); |
| 133 |
|
| 134 |
/* Set normal mode */ |
| 135 |
r &= ~(ULPI_FUNC_CTRL_RESET | ULPI_FUNC_CTRL_OPMODE_MASK); |
| 136 |
isp1704_write(isp, ULPI_FUNC_CTRL, r); |
| 137 |
|
| 138 |
/* Clear the DP and DM pull-down bits */ |
| 139 |
r = ULPI_OTG_CTRL_DP_PULLDOWN | ULPI_OTG_CTRL_DM_PULLDOWN; |
| 140 |
isp1704_write(isp, ULPI_CLR(ULPI_OTG_CTRL), r); |
| 141 |
|
| 142 |
/* Enable strong pull-up on DP (1.5K) and reset */ |
| 143 |
r = ULPI_FUNC_CTRL_TERMSELECT | ULPI_FUNC_CTRL_RESET; |
| 144 |
isp1704_write(isp, ULPI_SET(ULPI_FUNC_CTRL), r); |
| 145 |
usleep_range(1000, 2000); |
| 146 |
|
| 147 |
/* Read the line state */ |
| 148 |
if (!isp1704_read(isp, ULPI_DEBUG)) { |
| 149 |
/* Disable strong pull-up on DP (1.5K) */ |
| 150 |
isp1704_write(isp, ULPI_CLR(ULPI_FUNC_CTRL), |
| 151 |
ULPI_FUNC_CTRL_TERMSELECT); |
| 152 |
return 1; |
| 153 |
} |
| 154 |
|
| 155 |
/* Is it a charger or PS/2 connection */ |
| 156 |
|
| 157 |
/* Enable weak pull-up resistor on DP */ |
| 158 |
isp1704_write(isp, ULPI_SET(ISP1704_PWR_CTRL), |
| 159 |
ISP1704_PWR_CTRL_DP_WKPU_EN); |
| 160 |
|
| 161 |
/* Disable strong pull-up on DP (1.5K) */ |
| 162 |
isp1704_write(isp, ULPI_CLR(ULPI_FUNC_CTRL), |
| 163 |
ULPI_FUNC_CTRL_TERMSELECT); |
| 164 |
|
| 165 |
/* Enable weak pull-down resistor on DM */ |
| 166 |
isp1704_write(isp, ULPI_SET(ULPI_OTG_CTRL), |
| 167 |
ULPI_OTG_CTRL_DM_PULLDOWN); |
| 168 |
|
| 169 |
/* It's a charger if the line states are clear */ |
| 170 |
if (!(isp1704_read(isp, ULPI_DEBUG))) |
| 171 |
ret = 1; |
| 172 |
|
| 173 |
/* Disable weak pull-up resistor on DP */ |
| 174 |
isp1704_write(isp, ULPI_CLR(ISP1704_PWR_CTRL), |
| 175 |
ISP1704_PWR_CTRL_DP_WKPU_EN); |
| 176 |
|
| 177 |
return ret; |
| 178 |
} |
| 179 |
|
| 180 |
static inline int isp1704_charger_detect(struct isp1704_charger *isp) |
| 181 |
{ |
| 182 |
unsigned long timeout; |
| 183 |
u8 pwr_ctrl; |
| 184 |
int ret = 0; |
| 185 |
|
| 186 |
pwr_ctrl = isp1704_read(isp, ISP1704_PWR_CTRL); |
| 187 |
|
| 188 |
/* set SW control bit in PWR_CTRL register */ |
| 189 |
isp1704_write(isp, ISP1704_PWR_CTRL, |
| 190 |
ISP1704_PWR_CTRL_SWCTRL); |
| 191 |
|
| 192 |
/* enable manual charger detection */ |
| 193 |
isp1704_write(isp, ULPI_SET(ISP1704_PWR_CTRL), |
| 194 |
ISP1704_PWR_CTRL_SWCTRL |
| 195 |
| ISP1704_PWR_CTRL_DPVSRC_EN); |
| 196 |
usleep_range(1000, 2000); |
| 197 |
|
| 198 |
timeout = jiffies + msecs_to_jiffies(300); |
| 199 |
do { |
| 200 |
/* Check if there is a charger */ |
| 201 |
if (isp1704_read(isp, ISP1704_PWR_CTRL) |
| 202 |
& ISP1704_PWR_CTRL_VDAT_DET) { |
| 203 |
ret = isp1704_charger_verify(isp); |
| 204 |
break; |
| 205 |
} |
| 206 |
} while (!time_after(jiffies, timeout) && isp->online); |
| 207 |
|
| 208 |
/* recover original state */ |
| 209 |
isp1704_write(isp, ISP1704_PWR_CTRL, pwr_ctrl); |
| 210 |
|
| 211 |
return ret; |
| 212 |
} |
| 213 |
|
| 214 |
static inline int isp1704_charger_detect_dcp(struct isp1704_charger *isp) |
| 215 |
{ |
| 216 |
if (isp1704_charger_detect(isp) && |
| 217 |
isp1704_charger_type(isp) == POWER_SUPPLY_TYPE_USB_DCP) |
| 218 |
return true; |
| 219 |
else |
| 220 |
return false; |
| 221 |
} |
| 222 |
|
| 223 |
static void isp1704_charger_work(struct work_struct *data) |
| 224 |
{ |
| 225 |
struct isp1704_charger *isp = |
| 226 |
container_of(data, struct isp1704_charger, work); |
| 227 |
static DEFINE_MUTEX(lock); |
| 228 |
|
| 229 |
mutex_lock(&lock); |
| 230 |
|
| 231 |
switch (isp->phy->last_event) { |
| 232 |
case USB_EVENT_VBUS: |
| 233 |
/* do not call wall charger detection more times */ |
| 234 |
if (!isp->present) { |
| 235 |
isp->online = true; |
| 236 |
isp->present = 1; |
| 237 |
isp1704_charger_set_power(isp, 1); |
| 238 |
|
| 239 |
/* detect wall charger */ |
| 240 |
if (isp1704_charger_detect_dcp(isp)) { |
| 241 |
isp->psy_desc.type = POWER_SUPPLY_TYPE_USB_DCP; |
| 242 |
isp->current_max = 1800; |
| 243 |
} else { |
| 244 |
isp->psy_desc.type = POWER_SUPPLY_TYPE_USB; |
| 245 |
isp->current_max = 500; |
| 246 |
} |
| 247 |
|
| 248 |
/* enable data pullups */ |
| 249 |
if (isp->phy->otg->gadget) |
| 250 |
usb_gadget_connect(isp->phy->otg->gadget); |
| 251 |
} |
| 252 |
|
| 253 |
if (isp->psy_desc.type != POWER_SUPPLY_TYPE_USB_DCP) { |
| 254 |
/* |
| 255 |
* Only 500mA here or high speed chirp |
| 256 |
* handshaking may break |
| 257 |
*/ |
| 258 |
if (isp->current_max > 500) |
| 259 |
isp->current_max = 500; |
| 260 |
|
| 261 |
if (isp->current_max > 100) |
| 262 |
isp->psy_desc.type = POWER_SUPPLY_TYPE_USB_CDP; |
| 263 |
} |
| 264 |
break; |
| 265 |
case USB_EVENT_NONE: |
| 266 |
isp->online = false; |
| 267 |
isp->present = 0; |
| 268 |
isp->current_max = 0; |
| 269 |
isp->psy_desc.type = POWER_SUPPLY_TYPE_USB; |
| 270 |
|
| 271 |
/* |
| 272 |
* Disable data pullups. We need to prevent the controller from |
| 273 |
* enumerating. |
| 274 |
* |
| 275 |
* FIXME: This is here to allow charger detection with Host/HUB |
| 276 |
* chargers. The pullups may be enabled elsewhere, so this can |
| 277 |
* not be the final solution. |
| 278 |
*/ |
| 279 |
if (isp->phy->otg->gadget) |
| 280 |
usb_gadget_disconnect(isp->phy->otg->gadget); |
| 281 |
|
| 282 |
isp1704_charger_set_power(isp, 0); |
| 283 |
break; |
| 284 |
default: |
| 285 |
goto out; |
| 286 |
} |
| 287 |
|
| 288 |
power_supply_changed(isp->psy); |
| 289 |
out: |
| 290 |
mutex_unlock(&lock); |
| 291 |
} |
| 292 |
|
| 293 |
static int isp1704_notifier_call(struct notifier_block *nb, |
| 294 |
unsigned long val, void *v) |
| 295 |
{ |
| 296 |
struct isp1704_charger *isp = |
| 297 |
container_of(nb, struct isp1704_charger, nb); |
| 298 |
|
| 299 |
schedule_work(&isp->work); |
| 300 |
|
| 301 |
return NOTIFY_OK; |
| 302 |
} |
| 303 |
|
| 304 |
static int isp1704_charger_get_property(struct power_supply *psy, |
| 305 |
enum power_supply_property psp, |
| 306 |
union power_supply_propval *val) |
| 307 |
{ |
| 308 |
struct isp1704_charger *isp = power_supply_get_drvdata(psy); |
| 309 |
|
| 310 |
switch (psp) { |
| 311 |
case POWER_SUPPLY_PROP_PRESENT: |
| 312 |
val->intval = isp->present; |
| 313 |
break; |
| 314 |
case POWER_SUPPLY_PROP_ONLINE: |
| 315 |
val->intval = isp->online; |
| 316 |
break; |
| 317 |
case POWER_SUPPLY_PROP_CURRENT_MAX: |
| 318 |
val->intval = isp->current_max; |
| 319 |
break; |
| 320 |
case POWER_SUPPLY_PROP_MODEL_NAME: |
| 321 |
val->strval = isp->model; |
| 322 |
break; |
| 323 |
case POWER_SUPPLY_PROP_MANUFACTURER: |
| 324 |
val->strval = "NXP"; |
| 325 |
break; |
| 326 |
default: |
| 327 |
return -EINVAL; |
| 328 |
} |
| 329 |
return 0; |
| 330 |
} |
| 331 |
|
| 332 |
static enum power_supply_property power_props[] = { |
| 333 |
POWER_SUPPLY_PROP_PRESENT, |
| 334 |
POWER_SUPPLY_PROP_ONLINE, |
| 335 |
POWER_SUPPLY_PROP_CURRENT_MAX, |
| 336 |
POWER_SUPPLY_PROP_MODEL_NAME, |
| 337 |
POWER_SUPPLY_PROP_MANUFACTURER, |
| 338 |
}; |
| 339 |
|
| 340 |
static inline int isp1704_test_ulpi(struct isp1704_charger *isp) |
| 341 |
{ |
| 342 |
int vendor; |
| 343 |
int product; |
| 344 |
int i; |
| 345 |
int ret; |
| 346 |
|
| 347 |
/* Test ULPI interface */ |
| 348 |
ret = isp1704_write(isp, ULPI_SCRATCH, 0xaa); |
| 349 |
if (ret < 0) |
| 350 |
return ret; |
| 351 |
|
| 352 |
ret = isp1704_read(isp, ULPI_SCRATCH); |
| 353 |
if (ret < 0) |
| 354 |
return ret; |
| 355 |
|
| 356 |
if (ret != 0xaa) |
| 357 |
return -ENODEV; |
| 358 |
|
| 359 |
/* Verify the product and vendor id matches */ |
| 360 |
vendor = isp1704_read(isp, ULPI_VENDOR_ID_LOW); |
| 361 |
vendor |= isp1704_read(isp, ULPI_VENDOR_ID_HIGH) << 8; |
| 362 |
if (vendor != NXP_VENDOR_ID) |
| 363 |
return -ENODEV; |
| 364 |
|
| 365 |
product = isp1704_read(isp, ULPI_PRODUCT_ID_LOW); |
| 366 |
product |= isp1704_read(isp, ULPI_PRODUCT_ID_HIGH) << 8; |
| 367 |
|
| 368 |
for (i = 0; i < ARRAY_SIZE(isp170x_id); i++) { |
| 369 |
if (product == isp170x_id[i]) { |
| 370 |
sprintf(isp->model, "isp%x", product); |
| 371 |
return product; |
| 372 |
} |
| 373 |
} |
| 374 |
|
| 375 |
dev_err(isp->dev, "product id %x not matching known ids", product); |
| 376 |
|
| 377 |
return -ENODEV; |
| 378 |
} |
| 379 |
|
| 380 |
static int isp1704_charger_probe(struct platform_device *pdev) |
| 381 |
{ |
| 382 |
struct isp1704_charger *isp; |
| 383 |
int ret = -ENODEV; |
| 384 |
struct power_supply_config psy_cfg = {}; |
| 385 |
|
| 386 |
isp = devm_kzalloc(&pdev->dev, sizeof(*isp), GFP_KERNEL); |
| 387 |
if (!isp) |
| 388 |
return -ENOMEM; |
| 389 |
|
| 390 |
isp->enable_gpio = devm_gpiod_get(&pdev->dev, "nxp,enable", |
| 391 |
GPIOD_OUT_HIGH); |
| 392 |
if (IS_ERR(isp->enable_gpio)) { |
| 393 |
ret = PTR_ERR(isp->enable_gpio); |
| 394 |
dev_err(&pdev->dev, "Could not get reset gpio: %d\n", ret); |
| 395 |
return ret; |
| 396 |
} |
| 397 |
|
| 398 |
if (pdev->dev.of_node) |
| 399 |
isp->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0); |
| 400 |
else |
| 401 |
isp->phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); |
| 402 |
|
| 403 |
if (IS_ERR(isp->phy)) { |
| 404 |
ret = PTR_ERR(isp->phy); |
| 405 |
dev_err(&pdev->dev, "usb_get_phy failed\n"); |
| 406 |
goto fail0; |
| 407 |
} |
| 408 |
|
| 409 |
isp->dev = &pdev->dev; |
| 410 |
platform_set_drvdata(pdev, isp); |
| 411 |
|
| 412 |
isp1704_charger_set_power(isp, 1); |
| 413 |
|
| 414 |
ret = isp1704_test_ulpi(isp); |
| 415 |
if (ret < 0) { |
| 416 |
dev_err(&pdev->dev, "isp1704_test_ulpi failed\n"); |
| 417 |
goto fail1; |
| 418 |
} |
| 419 |
|
| 420 |
isp->psy_desc.name = "isp1704"; |
| 421 |
isp->psy_desc.type = POWER_SUPPLY_TYPE_USB; |
| 422 |
isp->psy_desc.properties = power_props; |
| 423 |
isp->psy_desc.num_properties = ARRAY_SIZE(power_props); |
| 424 |
isp->psy_desc.get_property = isp1704_charger_get_property; |
| 425 |
|
| 426 |
psy_cfg.drv_data = isp; |
| 427 |
|
| 428 |
isp->psy = power_supply_register(isp->dev, &isp->psy_desc, &psy_cfg); |
| 429 |
if (IS_ERR(isp->psy)) { |
| 430 |
ret = PTR_ERR(isp->psy); |
| 431 |
dev_err(&pdev->dev, "power_supply_register failed\n"); |
| 432 |
goto fail1; |
| 433 |
} |
| 434 |
|
| 435 |
/* |
| 436 |
* REVISIT: using work in order to allow the usb notifications to be |
| 437 |
* made atomically in the future. |
| 438 |
*/ |
| 439 |
INIT_WORK(&isp->work, isp1704_charger_work); |
| 440 |
|
| 441 |
isp->nb.notifier_call = isp1704_notifier_call; |
| 442 |
|
| 443 |
ret = usb_register_notifier(isp->phy, &isp->nb); |
| 444 |
if (ret) { |
| 445 |
dev_err(&pdev->dev, "usb_register_notifier failed\n"); |
| 446 |
goto fail2; |
| 447 |
} |
| 448 |
|
| 449 |
dev_info(isp->dev, "registered with product id %s\n", isp->model); |
| 450 |
|
| 451 |
/* |
| 452 |
* Taking over the D+ pullup. |
| 453 |
* |
| 454 |
* FIXME: The device will be disconnected if it was already |
| 455 |
* enumerated. The charger driver should be always loaded before any |
| 456 |
* gadget is loaded. |
| 457 |
*/ |
| 458 |
if (isp->phy->otg->gadget) |
| 459 |
usb_gadget_disconnect(isp->phy->otg->gadget); |
| 460 |
|
| 461 |
if (isp->phy->last_event == USB_EVENT_NONE) |
| 462 |
isp1704_charger_set_power(isp, 0); |
| 463 |
|
| 464 |
/* Detect charger if VBUS is valid (the cable was already plugged). */ |
| 465 |
if (isp->phy->last_event == USB_EVENT_VBUS && |
| 466 |
!isp->phy->otg->default_a) |
| 467 |
schedule_work(&isp->work); |
| 468 |
|
| 469 |
return 0; |
| 470 |
fail2: |
| 471 |
power_supply_unregister(isp->psy); |
| 472 |
fail1: |
| 473 |
isp1704_charger_set_power(isp, 0); |
| 474 |
fail0: |
| 475 |
dev_err(&pdev->dev, "failed to register isp1704 with error %d\n", ret); |
| 476 |
|
| 477 |
return ret; |
| 478 |
} |
| 479 |
|
| 480 |
static void isp1704_charger_remove(struct platform_device *pdev) |
| 481 |
{ |
| 482 |
struct isp1704_charger *isp = platform_get_drvdata(pdev); |
| 483 |
|
| 484 |
usb_unregister_notifier(isp->phy, &isp->nb); |
| 485 |
power_supply_unregister(isp->psy); |
| 486 |
isp1704_charger_set_power(isp, 0); |
| 487 |
} |
| 488 |
|
| 489 |
#ifdef CONFIG_OF |
| 490 |
static const struct of_device_id omap_isp1704_of_match[] = { |
| 491 |
{ .compatible = "nxp,isp1704", }, |
| 492 |
{ .compatible = "nxp,isp1707", }, |
| 493 |
{}, |
| 494 |
}; |
| 495 |
MODULE_DEVICE_TABLE(of, omap_isp1704_of_match); |
| 496 |
#endif |
| 497 |
|
| 498 |
static struct platform_driver isp1704_charger_driver = { |
| 499 |
.driver = { |
| 500 |
.name = "isp1704_charger", |
| 501 |
.of_match_table = of_match_ptr(omap_isp1704_of_match), |
| 502 |
}, |
| 503 |
.probe = isp1704_charger_probe, |
| 504 |
.remove = isp1704_charger_remove, |
| 505 |
}; |
| 506 |
|
| 507 |
module_platform_driver(isp1704_charger_driver); |
| 508 |
|
| 509 |
MODULE_ALIAS("platform:isp1704_charger"); |
| 510 |
MODULE_AUTHOR("Nokia Corporation"); |
| 511 |
MODULE_DESCRIPTION("ISP170x USB Charger driver"); |
| 512 |
MODULE_LICENSE("GPL"); |