| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Battery driver for Marvell 88PM860x PMIC |
| 4 |
* |
| 5 |
* Copyright (c) 2012 Marvell International Ltd. |
| 6 |
* Author: Jett Zhou <[email protected]> |
| 7 |
* Haojian Zhuang <[email protected]> |
| 8 |
*/ |
| 9 |
|
| 10 |
#include <linux/kernel.h> |
| 11 |
#include <linux/module.h> |
| 12 |
#include <linux/platform_device.h> |
| 13 |
#include <linux/slab.h> |
| 14 |
#include <linux/mutex.h> |
| 15 |
#include <linux/string.h> |
| 16 |
#include <linux/power_supply.h> |
| 17 |
#include <linux/string_choices.h> |
| 18 |
#include <linux/mfd/88pm860x.h> |
| 19 |
#include <linux/delay.h> |
| 20 |
|
| 21 |
/* bit definitions of Status Query Interface 2 */ |
| 22 |
#define STATUS2_CHG (1 << 2) |
| 23 |
#define STATUS2_BAT (1 << 3) |
| 24 |
#define STATUS2_VBUS (1 << 4) |
| 25 |
|
| 26 |
/* bit definitions of Measurement Enable 1 Register */ |
| 27 |
#define MEAS1_TINT (1 << 3) |
| 28 |
#define MEAS1_GP1 (1 << 5) |
| 29 |
|
| 30 |
/* bit definitions of Measurement Enable 3 Register */ |
| 31 |
#define MEAS3_IBAT (1 << 0) |
| 32 |
#define MEAS3_BAT_DET (1 << 1) |
| 33 |
#define MEAS3_CC (1 << 2) |
| 34 |
|
| 35 |
/* bit definitions of Measurement Off Time Register */ |
| 36 |
#define MEAS_OFF_SLEEP_EN (1 << 1) |
| 37 |
|
| 38 |
/* bit definitions of GPADC Bias Current 2 Register */ |
| 39 |
#define GPBIAS2_GPADC1_SET (2 << 4) |
| 40 |
/* GPADC1 Bias Current value in uA unit */ |
| 41 |
#define GPBIAS2_GPADC1_UA ((GPBIAS2_GPADC1_SET >> 4) * 5 + 1) |
| 42 |
|
| 43 |
/* bit definitions of GPADC Misc 1 Register */ |
| 44 |
#define GPMISC1_GPADC_EN (1 << 0) |
| 45 |
|
| 46 |
/* bit definitions of Charger Control 6 Register */ |
| 47 |
#define CC6_BAT_DET_GPADC1 1 |
| 48 |
|
| 49 |
/* bit definitions of Coulomb Counter Reading Register */ |
| 50 |
#define CCNT_AVG_SEL (4 << 3) |
| 51 |
|
| 52 |
/* bit definitions of RTC miscellaneous Register1 */ |
| 53 |
#define RTC_SOC_5LSB (0x1F << 3) |
| 54 |
|
| 55 |
/* bit definitions of RTC Register1 */ |
| 56 |
#define RTC_SOC_3MSB (0x7) |
| 57 |
|
| 58 |
/* bit definitions of Power up Log register */ |
| 59 |
#define BAT_WU_LOG (1<<6) |
| 60 |
|
| 61 |
/* coulomb counter index */ |
| 62 |
#define CCNT_POS1 0 |
| 63 |
#define CCNT_POS2 1 |
| 64 |
#define CCNT_NEG1 2 |
| 65 |
#define CCNT_NEG2 3 |
| 66 |
#define CCNT_SPOS 4 |
| 67 |
#define CCNT_SNEG 5 |
| 68 |
|
| 69 |
/* OCV -- Open Circuit Voltage */ |
| 70 |
#define OCV_MODE_ACTIVE 0 |
| 71 |
#define OCV_MODE_SLEEP 1 |
| 72 |
|
| 73 |
/* Vbat range of CC for measuring Rbat */ |
| 74 |
#define LOW_BAT_THRESHOLD 3600 |
| 75 |
#define VBATT_RESISTOR_MIN 3800 |
| 76 |
#define VBATT_RESISTOR_MAX 4100 |
| 77 |
|
| 78 |
/* TBAT for batt, TINT for chip itself */ |
| 79 |
#define PM860X_TEMP_TINT (0) |
| 80 |
#define PM860X_TEMP_TBAT (1) |
| 81 |
|
| 82 |
/* |
| 83 |
* Battery temperature based on NTC resistor, defined |
| 84 |
* corresponding resistor value -- Ohm / C degeree. |
| 85 |
*/ |
| 86 |
#define TBAT_NEG_25D 127773 /* -25 */ |
| 87 |
#define TBAT_NEG_10D 54564 /* -10 */ |
| 88 |
#define TBAT_0D 32330 /* 0 */ |
| 89 |
#define TBAT_10D 19785 /* 10 */ |
| 90 |
#define TBAT_20D 12468 /* 20 */ |
| 91 |
#define TBAT_30D 8072 /* 30 */ |
| 92 |
#define TBAT_40D 5356 /* 40 */ |
| 93 |
|
| 94 |
struct pm860x_battery_info { |
| 95 |
struct pm860x_chip *chip; |
| 96 |
struct i2c_client *i2c; |
| 97 |
struct device *dev; |
| 98 |
|
| 99 |
struct power_supply *battery; |
| 100 |
struct mutex lock; |
| 101 |
int status; |
| 102 |
int irq_cc; |
| 103 |
int irq_batt; |
| 104 |
int max_capacity; |
| 105 |
int resistor; /* Battery Internal Resistor */ |
| 106 |
int last_capacity; |
| 107 |
int start_soc; |
| 108 |
unsigned present:1; |
| 109 |
unsigned temp_type:1; /* TINT or TBAT */ |
| 110 |
}; |
| 111 |
|
| 112 |
struct ccnt { |
| 113 |
unsigned long long pos; |
| 114 |
unsigned long long neg; |
| 115 |
unsigned int spos; |
| 116 |
unsigned int sneg; |
| 117 |
|
| 118 |
int total_chg; /* mAh(3.6C) */ |
| 119 |
int total_dischg; /* mAh(3.6C) */ |
| 120 |
}; |
| 121 |
|
| 122 |
/* |
| 123 |
* State of Charge. |
| 124 |
* The first number is mAh(=3.6C), and the second number is percent point. |
| 125 |
*/ |
| 126 |
static int array_soc[][2] = { |
| 127 |
{4170, 100}, {4154, 99}, {4136, 98}, {4122, 97}, {4107, 96}, |
| 128 |
{4102, 95}, {4088, 94}, {4081, 93}, {4070, 92}, {4060, 91}, |
| 129 |
{4053, 90}, {4044, 89}, {4035, 88}, {4028, 87}, {4019, 86}, |
| 130 |
{4013, 85}, {4006, 84}, {3995, 83}, {3987, 82}, {3982, 81}, |
| 131 |
{3976, 80}, {3968, 79}, {3962, 78}, {3954, 77}, {3946, 76}, |
| 132 |
{3941, 75}, {3934, 74}, {3929, 73}, {3922, 72}, {3916, 71}, |
| 133 |
{3910, 70}, {3904, 69}, {3898, 68}, {3892, 67}, {3887, 66}, |
| 134 |
{3880, 65}, {3874, 64}, {3868, 63}, {3862, 62}, {3854, 61}, |
| 135 |
{3849, 60}, {3843, 59}, {3840, 58}, {3833, 57}, {3829, 56}, |
| 136 |
{3824, 55}, {3818, 54}, {3815, 53}, {3810, 52}, {3808, 51}, |
| 137 |
{3804, 50}, {3801, 49}, {3798, 48}, {3796, 47}, {3792, 46}, |
| 138 |
{3789, 45}, {3785, 44}, {3784, 43}, {3782, 42}, {3780, 41}, |
| 139 |
{3777, 40}, {3776, 39}, {3774, 38}, {3772, 37}, {3771, 36}, |
| 140 |
{3769, 35}, {3768, 34}, {3764, 33}, {3763, 32}, {3760, 31}, |
| 141 |
{3760, 30}, {3754, 29}, {3750, 28}, {3749, 27}, {3744, 26}, |
| 142 |
{3740, 25}, {3734, 24}, {3732, 23}, {3728, 22}, {3726, 21}, |
| 143 |
{3720, 20}, {3716, 19}, {3709, 18}, {3703, 17}, {3698, 16}, |
| 144 |
{3692, 15}, {3683, 14}, {3675, 13}, {3670, 12}, {3665, 11}, |
| 145 |
{3661, 10}, {3649, 9}, {3637, 8}, {3622, 7}, {3609, 6}, |
| 146 |
{3580, 5}, {3558, 4}, {3540, 3}, {3510, 2}, {3429, 1}, |
| 147 |
}; |
| 148 |
|
| 149 |
static struct ccnt ccnt_data; |
| 150 |
|
| 151 |
/* |
| 152 |
* register 1 bit[7:0] -- bit[11:4] of measured value of voltage |
| 153 |
* register 0 bit[3:0] -- bit[3:0] of measured value of voltage |
| 154 |
*/ |
| 155 |
static int measure_12bit_voltage(struct pm860x_battery_info *info, |
| 156 |
int offset, int *data) |
| 157 |
{ |
| 158 |
unsigned char buf[2]; |
| 159 |
int ret; |
| 160 |
|
| 161 |
ret = pm860x_bulk_read(info->i2c, offset, 2, buf); |
| 162 |
if (ret < 0) |
| 163 |
return ret; |
| 164 |
|
| 165 |
*data = ((buf[0] & 0xff) << 4) | (buf[1] & 0x0f); |
| 166 |
/* V_MEAS(mV) = data * 1.8 * 1000 / (2^12) */ |
| 167 |
*data = ((*data & 0xfff) * 9 * 25) >> 9; |
| 168 |
return 0; |
| 169 |
} |
| 170 |
|
| 171 |
static int measure_vbatt(struct pm860x_battery_info *info, int state, |
| 172 |
int *data) |
| 173 |
{ |
| 174 |
unsigned char buf[5]; |
| 175 |
int ret; |
| 176 |
|
| 177 |
switch (state) { |
| 178 |
case OCV_MODE_ACTIVE: |
| 179 |
ret = measure_12bit_voltage(info, PM8607_VBAT_MEAS1, data); |
| 180 |
if (ret) |
| 181 |
return ret; |
| 182 |
/* V_BATT_MEAS(mV) = value * 3 * 1.8 * 1000 / (2^12) */ |
| 183 |
*data *= 3; |
| 184 |
break; |
| 185 |
case OCV_MODE_SLEEP: |
| 186 |
/* |
| 187 |
* voltage value of VBATT in sleep mode is saved in different |
| 188 |
* registers. |
| 189 |
* bit[11:10] -- bit[7:6] of LDO9(0x18) |
| 190 |
* bit[9:8] -- bit[7:6] of LDO8(0x17) |
| 191 |
* bit[7:6] -- bit[7:6] of LDO7(0x16) |
| 192 |
* bit[5:4] -- bit[7:6] of LDO6(0x15) |
| 193 |
* bit[3:0] -- bit[7:4] of LDO5(0x14) |
| 194 |
*/ |
| 195 |
ret = pm860x_bulk_read(info->i2c, PM8607_LDO5, 5, buf); |
| 196 |
if (ret < 0) |
| 197 |
return ret; |
| 198 |
ret = ((buf[4] >> 6) << 10) | ((buf[3] >> 6) << 8) |
| 199 |
| ((buf[2] >> 6) << 6) | ((buf[1] >> 6) << 4) |
| 200 |
| (buf[0] >> 4); |
| 201 |
/* V_BATT_MEAS(mV) = data * 3 * 1.8 * 1000 / (2^12) */ |
| 202 |
*data = ((*data & 0xff) * 27 * 25) >> 9; |
| 203 |
break; |
| 204 |
default: |
| 205 |
return -EINVAL; |
| 206 |
} |
| 207 |
return 0; |
| 208 |
} |
| 209 |
|
| 210 |
/* |
| 211 |
* Return value is signed data. |
| 212 |
* Negative value means discharging, and positive value means charging. |
| 213 |
*/ |
| 214 |
static int measure_current(struct pm860x_battery_info *info, int *data) |
| 215 |
{ |
| 216 |
unsigned char buf[2]; |
| 217 |
short s; |
| 218 |
int ret; |
| 219 |
|
| 220 |
ret = pm860x_bulk_read(info->i2c, PM8607_IBAT_MEAS1, 2, buf); |
| 221 |
if (ret < 0) |
| 222 |
return ret; |
| 223 |
|
| 224 |
s = ((buf[0] & 0xff) << 8) | (buf[1] & 0xff); |
| 225 |
/* current(mA) = value * 0.125 */ |
| 226 |
*data = s >> 3; |
| 227 |
return 0; |
| 228 |
} |
| 229 |
|
| 230 |
static int set_charger_current(struct pm860x_battery_info *info, int data, |
| 231 |
int *old) |
| 232 |
{ |
| 233 |
int ret; |
| 234 |
|
| 235 |
if (data < 50 || data > 1600 || !old) |
| 236 |
return -EINVAL; |
| 237 |
|
| 238 |
data = ((data - 50) / 50) & 0x1f; |
| 239 |
*old = pm860x_reg_read(info->i2c, PM8607_CHG_CTRL2); |
| 240 |
*old = (*old & 0x1f) * 50 + 50; |
| 241 |
ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL2, 0x1f, data); |
| 242 |
if (ret < 0) |
| 243 |
return ret; |
| 244 |
return 0; |
| 245 |
} |
| 246 |
|
| 247 |
static int read_ccnt(struct pm860x_battery_info *info, int offset, |
| 248 |
int *ccnt) |
| 249 |
{ |
| 250 |
unsigned char buf[2]; |
| 251 |
int ret; |
| 252 |
|
| 253 |
ret = pm860x_set_bits(info->i2c, PM8607_CCNT, 7, offset & 7); |
| 254 |
if (ret < 0) |
| 255 |
goto out; |
| 256 |
ret = pm860x_bulk_read(info->i2c, PM8607_CCNT_MEAS1, 2, buf); |
| 257 |
if (ret < 0) |
| 258 |
goto out; |
| 259 |
*ccnt = ((buf[0] & 0xff) << 8) | (buf[1] & 0xff); |
| 260 |
return 0; |
| 261 |
out: |
| 262 |
return ret; |
| 263 |
} |
| 264 |
|
| 265 |
static int calc_ccnt(struct pm860x_battery_info *info, struct ccnt *ccnt) |
| 266 |
{ |
| 267 |
unsigned int sum; |
| 268 |
int ret; |
| 269 |
int data; |
| 270 |
|
| 271 |
ret = read_ccnt(info, CCNT_POS1, &data); |
| 272 |
if (ret) |
| 273 |
goto out; |
| 274 |
sum = data & 0xffff; |
| 275 |
ret = read_ccnt(info, CCNT_POS2, &data); |
| 276 |
if (ret) |
| 277 |
goto out; |
| 278 |
sum |= (data & 0xffff) << 16; |
| 279 |
ccnt->pos += sum; |
| 280 |
|
| 281 |
ret = read_ccnt(info, CCNT_NEG1, &data); |
| 282 |
if (ret) |
| 283 |
goto out; |
| 284 |
sum = data & 0xffff; |
| 285 |
ret = read_ccnt(info, CCNT_NEG2, &data); |
| 286 |
if (ret) |
| 287 |
goto out; |
| 288 |
sum |= (data & 0xffff) << 16; |
| 289 |
sum = ~sum + 1; /* since it's negative */ |
| 290 |
ccnt->neg += sum; |
| 291 |
|
| 292 |
ret = read_ccnt(info, CCNT_SPOS, &data); |
| 293 |
if (ret) |
| 294 |
goto out; |
| 295 |
ccnt->spos += data; |
| 296 |
ret = read_ccnt(info, CCNT_SNEG, &data); |
| 297 |
if (ret) |
| 298 |
goto out; |
| 299 |
|
| 300 |
/* |
| 301 |
* charge(mAh) = count * 1.6984 * 1e(-8) |
| 302 |
* = count * 16984 * 1.024 * 1.024 * 1.024 / (2 ^ 40) |
| 303 |
* = count * 18236 / (2 ^ 40) |
| 304 |
*/ |
| 305 |
ccnt->total_chg = (int) ((ccnt->pos * 18236) >> 40); |
| 306 |
ccnt->total_dischg = (int) ((ccnt->neg * 18236) >> 40); |
| 307 |
return 0; |
| 308 |
out: |
| 309 |
return ret; |
| 310 |
} |
| 311 |
|
| 312 |
static int clear_ccnt(struct pm860x_battery_info *info, struct ccnt *ccnt) |
| 313 |
{ |
| 314 |
int data; |
| 315 |
|
| 316 |
memset(ccnt, 0, sizeof(*ccnt)); |
| 317 |
/* read to clear ccnt */ |
| 318 |
read_ccnt(info, CCNT_POS1, &data); |
| 319 |
read_ccnt(info, CCNT_POS2, &data); |
| 320 |
read_ccnt(info, CCNT_NEG1, &data); |
| 321 |
read_ccnt(info, CCNT_NEG2, &data); |
| 322 |
read_ccnt(info, CCNT_SPOS, &data); |
| 323 |
read_ccnt(info, CCNT_SNEG, &data); |
| 324 |
return 0; |
| 325 |
} |
| 326 |
|
| 327 |
/* Calculate Open Circuit Voltage */ |
| 328 |
static int calc_ocv(struct pm860x_battery_info *info, int *ocv) |
| 329 |
{ |
| 330 |
int ret; |
| 331 |
int i; |
| 332 |
int data; |
| 333 |
int vbatt_avg; |
| 334 |
int vbatt_sum; |
| 335 |
int ibatt_avg; |
| 336 |
int ibatt_sum; |
| 337 |
|
| 338 |
if (!ocv) |
| 339 |
return -EINVAL; |
| 340 |
|
| 341 |
for (i = 0, ibatt_sum = 0, vbatt_sum = 0; i < 10; i++) { |
| 342 |
ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data); |
| 343 |
if (ret) |
| 344 |
goto out; |
| 345 |
vbatt_sum += data; |
| 346 |
ret = measure_current(info, &data); |
| 347 |
if (ret) |
| 348 |
goto out; |
| 349 |
ibatt_sum += data; |
| 350 |
} |
| 351 |
vbatt_avg = vbatt_sum / 10; |
| 352 |
ibatt_avg = ibatt_sum / 10; |
| 353 |
|
| 354 |
mutex_lock(&info->lock); |
| 355 |
if (info->present) |
| 356 |
*ocv = vbatt_avg - ibatt_avg * info->resistor / 1000; |
| 357 |
else |
| 358 |
*ocv = vbatt_avg; |
| 359 |
mutex_unlock(&info->lock); |
| 360 |
dev_dbg(info->dev, "VBAT average:%d, OCV:%d\n", vbatt_avg, *ocv); |
| 361 |
return 0; |
| 362 |
out: |
| 363 |
return ret; |
| 364 |
} |
| 365 |
|
| 366 |
/* Calculate State of Charge (percent points) */ |
| 367 |
static int calc_soc(struct pm860x_battery_info *info, int state, int *soc) |
| 368 |
{ |
| 369 |
int i; |
| 370 |
int ocv; |
| 371 |
int count; |
| 372 |
int ret = -EINVAL; |
| 373 |
|
| 374 |
if (!soc) |
| 375 |
return -EINVAL; |
| 376 |
|
| 377 |
switch (state) { |
| 378 |
case OCV_MODE_ACTIVE: |
| 379 |
ret = calc_ocv(info, &ocv); |
| 380 |
break; |
| 381 |
case OCV_MODE_SLEEP: |
| 382 |
ret = measure_vbatt(info, OCV_MODE_SLEEP, &ocv); |
| 383 |
break; |
| 384 |
} |
| 385 |
if (ret) |
| 386 |
return ret; |
| 387 |
|
| 388 |
count = ARRAY_SIZE(array_soc); |
| 389 |
if (ocv < array_soc[count - 1][0]) { |
| 390 |
*soc = 0; |
| 391 |
return 0; |
| 392 |
} |
| 393 |
|
| 394 |
for (i = 0; i < count; i++) { |
| 395 |
if (ocv >= array_soc[i][0]) { |
| 396 |
*soc = array_soc[i][1]; |
| 397 |
break; |
| 398 |
} |
| 399 |
} |
| 400 |
return 0; |
| 401 |
} |
| 402 |
|
| 403 |
static irqreturn_t pm860x_coulomb_handler(int irq, void *data) |
| 404 |
{ |
| 405 |
struct pm860x_battery_info *info = data; |
| 406 |
|
| 407 |
calc_ccnt(info, &ccnt_data); |
| 408 |
return IRQ_HANDLED; |
| 409 |
} |
| 410 |
|
| 411 |
static irqreturn_t pm860x_batt_handler(int irq, void *data) |
| 412 |
{ |
| 413 |
struct pm860x_battery_info *info = data; |
| 414 |
int ret; |
| 415 |
|
| 416 |
mutex_lock(&info->lock); |
| 417 |
ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2); |
| 418 |
if (ret & STATUS2_BAT) { |
| 419 |
info->present = 1; |
| 420 |
info->temp_type = PM860X_TEMP_TBAT; |
| 421 |
} else { |
| 422 |
info->present = 0; |
| 423 |
info->temp_type = PM860X_TEMP_TINT; |
| 424 |
} |
| 425 |
mutex_unlock(&info->lock); |
| 426 |
/* clear ccnt since battery is attached or detached */ |
| 427 |
clear_ccnt(info, &ccnt_data); |
| 428 |
return IRQ_HANDLED; |
| 429 |
} |
| 430 |
|
| 431 |
static void pm860x_init_battery(struct pm860x_battery_info *info) |
| 432 |
{ |
| 433 |
unsigned char buf[2]; |
| 434 |
int ret; |
| 435 |
int data; |
| 436 |
int bat_remove; |
| 437 |
int soc = 0; |
| 438 |
|
| 439 |
/* measure enable on GPADC1 */ |
| 440 |
data = MEAS1_GP1; |
| 441 |
if (info->temp_type == PM860X_TEMP_TINT) |
| 442 |
data |= MEAS1_TINT; |
| 443 |
ret = pm860x_set_bits(info->i2c, PM8607_MEAS_EN1, data, data); |
| 444 |
if (ret) |
| 445 |
goto out; |
| 446 |
|
| 447 |
/* measure enable on IBAT, BAT_DET, CC. IBAT is depend on CC. */ |
| 448 |
data = MEAS3_IBAT | MEAS3_BAT_DET | MEAS3_CC; |
| 449 |
ret = pm860x_set_bits(info->i2c, PM8607_MEAS_EN3, data, data); |
| 450 |
if (ret) |
| 451 |
goto out; |
| 452 |
|
| 453 |
/* measure disable CC in sleep time */ |
| 454 |
ret = pm860x_reg_write(info->i2c, PM8607_MEAS_OFF_TIME1, 0x82); |
| 455 |
if (ret) |
| 456 |
goto out; |
| 457 |
ret = pm860x_reg_write(info->i2c, PM8607_MEAS_OFF_TIME2, 0x6c); |
| 458 |
if (ret) |
| 459 |
goto out; |
| 460 |
|
| 461 |
/* enable GPADC */ |
| 462 |
ret = pm860x_set_bits(info->i2c, PM8607_GPADC_MISC1, |
| 463 |
GPMISC1_GPADC_EN, GPMISC1_GPADC_EN); |
| 464 |
if (ret < 0) |
| 465 |
goto out; |
| 466 |
|
| 467 |
/* detect battery via GPADC1 */ |
| 468 |
ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL6, |
| 469 |
CC6_BAT_DET_GPADC1, CC6_BAT_DET_GPADC1); |
| 470 |
if (ret < 0) |
| 471 |
goto out; |
| 472 |
|
| 473 |
ret = pm860x_set_bits(info->i2c, PM8607_CCNT, 7 << 3, |
| 474 |
CCNT_AVG_SEL); |
| 475 |
if (ret < 0) |
| 476 |
goto out; |
| 477 |
|
| 478 |
/* set GPADC1 bias */ |
| 479 |
ret = pm860x_set_bits(info->i2c, PM8607_GP_BIAS2, 0xF << 4, |
| 480 |
GPBIAS2_GPADC1_SET); |
| 481 |
if (ret < 0) |
| 482 |
goto out; |
| 483 |
|
| 484 |
/* check whether battery present) */ |
| 485 |
mutex_lock(&info->lock); |
| 486 |
ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2); |
| 487 |
if (ret < 0) { |
| 488 |
mutex_unlock(&info->lock); |
| 489 |
goto out; |
| 490 |
} |
| 491 |
if (ret & STATUS2_BAT) { |
| 492 |
info->present = 1; |
| 493 |
info->temp_type = PM860X_TEMP_TBAT; |
| 494 |
} else { |
| 495 |
info->present = 0; |
| 496 |
info->temp_type = PM860X_TEMP_TINT; |
| 497 |
} |
| 498 |
mutex_unlock(&info->lock); |
| 499 |
|
| 500 |
ret = calc_soc(info, OCV_MODE_ACTIVE, &soc); |
| 501 |
if (ret < 0) |
| 502 |
goto out; |
| 503 |
|
| 504 |
data = pm860x_reg_read(info->i2c, PM8607_POWER_UP_LOG); |
| 505 |
bat_remove = data & BAT_WU_LOG; |
| 506 |
|
| 507 |
dev_dbg(info->dev, "battery wake up? %s\n", str_yes_no(bat_remove)); |
| 508 |
|
| 509 |
/* restore SOC from RTC domain register */ |
| 510 |
if (bat_remove == 0) { |
| 511 |
buf[0] = pm860x_reg_read(info->i2c, PM8607_RTC_MISC2); |
| 512 |
buf[1] = pm860x_reg_read(info->i2c, PM8607_RTC1); |
| 513 |
data = ((buf[1] & 0x3) << 5) | ((buf[0] >> 3) & 0x1F); |
| 514 |
if (data > soc + 15) |
| 515 |
info->start_soc = soc; |
| 516 |
else if (data < soc - 15) |
| 517 |
info->start_soc = soc; |
| 518 |
else |
| 519 |
info->start_soc = data; |
| 520 |
dev_dbg(info->dev, "soc_rtc %d, soc_ocv :%d\n", data, soc); |
| 521 |
} else { |
| 522 |
pm860x_set_bits(info->i2c, PM8607_POWER_UP_LOG, |
| 523 |
BAT_WU_LOG, BAT_WU_LOG); |
| 524 |
info->start_soc = soc; |
| 525 |
} |
| 526 |
info->last_capacity = info->start_soc; |
| 527 |
dev_dbg(info->dev, "init soc : %d\n", info->last_capacity); |
| 528 |
out: |
| 529 |
return; |
| 530 |
} |
| 531 |
|
| 532 |
static void set_temp_threshold(struct pm860x_battery_info *info, |
| 533 |
int min, int max) |
| 534 |
{ |
| 535 |
int data; |
| 536 |
|
| 537 |
/* (tmp << 8) / 1800 */ |
| 538 |
if (min <= 0) |
| 539 |
data = 0; |
| 540 |
else |
| 541 |
data = (min << 8) / 1800; |
| 542 |
pm860x_reg_write(info->i2c, PM8607_GPADC1_HIGHTH, data); |
| 543 |
dev_dbg(info->dev, "TEMP_HIGHTH : min: %d, 0x%x\n", min, data); |
| 544 |
|
| 545 |
if (max <= 0) |
| 546 |
data = 0xff; |
| 547 |
else |
| 548 |
data = (max << 8) / 1800; |
| 549 |
pm860x_reg_write(info->i2c, PM8607_GPADC1_LOWTH, data); |
| 550 |
dev_dbg(info->dev, "TEMP_LOWTH:max : %d, 0x%x\n", max, data); |
| 551 |
} |
| 552 |
|
| 553 |
static int measure_temp(struct pm860x_battery_info *info, int *data) |
| 554 |
{ |
| 555 |
int ret; |
| 556 |
int temp; |
| 557 |
int min; |
| 558 |
int max; |
| 559 |
|
| 560 |
if (info->temp_type == PM860X_TEMP_TINT) { |
| 561 |
ret = measure_12bit_voltage(info, PM8607_TINT_MEAS1, data); |
| 562 |
if (ret) |
| 563 |
return ret; |
| 564 |
*data = (*data - 884) * 1000 / 3611; |
| 565 |
} else { |
| 566 |
ret = measure_12bit_voltage(info, PM8607_GPADC1_MEAS1, data); |
| 567 |
if (ret) |
| 568 |
return ret; |
| 569 |
/* measured Vtbat(mV) / Ibias_current(11uA)*/ |
| 570 |
*data = (*data * 1000) / GPBIAS2_GPADC1_UA; |
| 571 |
|
| 572 |
if (*data > TBAT_NEG_25D) { |
| 573 |
temp = -30; /* over cold , suppose -30 roughly */ |
| 574 |
max = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000; |
| 575 |
set_temp_threshold(info, 0, max); |
| 576 |
} else if (*data > TBAT_NEG_10D) { |
| 577 |
temp = -15; /* -15 degree, code */ |
| 578 |
max = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000; |
| 579 |
set_temp_threshold(info, 0, max); |
| 580 |
} else if (*data > TBAT_0D) { |
| 581 |
temp = -5; /* -5 degree */ |
| 582 |
min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000; |
| 583 |
max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000; |
| 584 |
set_temp_threshold(info, min, max); |
| 585 |
} else if (*data > TBAT_10D) { |
| 586 |
temp = 5; /* in range of (0, 10) */ |
| 587 |
min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000; |
| 588 |
max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000; |
| 589 |
set_temp_threshold(info, min, max); |
| 590 |
} else if (*data > TBAT_20D) { |
| 591 |
temp = 15; /* in range of (10, 20) */ |
| 592 |
min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000; |
| 593 |
max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000; |
| 594 |
set_temp_threshold(info, min, max); |
| 595 |
} else if (*data > TBAT_30D) { |
| 596 |
temp = 25; /* in range of (20, 30) */ |
| 597 |
min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000; |
| 598 |
max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000; |
| 599 |
set_temp_threshold(info, min, max); |
| 600 |
} else if (*data > TBAT_40D) { |
| 601 |
temp = 35; /* in range of (30, 40) */ |
| 602 |
min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000; |
| 603 |
max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000; |
| 604 |
set_temp_threshold(info, min, max); |
| 605 |
} else { |
| 606 |
min = TBAT_40D * GPBIAS2_GPADC1_UA / 1000; |
| 607 |
set_temp_threshold(info, min, 0); |
| 608 |
temp = 45; /* over heat ,suppose 45 roughly */ |
| 609 |
} |
| 610 |
|
| 611 |
dev_dbg(info->dev, "temp_C:%d C,temp_mv:%d mv\n", temp, *data); |
| 612 |
*data = temp; |
| 613 |
} |
| 614 |
return 0; |
| 615 |
} |
| 616 |
|
| 617 |
static int calc_resistor(struct pm860x_battery_info *info) |
| 618 |
{ |
| 619 |
int vbatt_sum1; |
| 620 |
int vbatt_sum2; |
| 621 |
int chg_current; |
| 622 |
int ibatt_sum1; |
| 623 |
int ibatt_sum2; |
| 624 |
int data; |
| 625 |
int ret; |
| 626 |
int i; |
| 627 |
|
| 628 |
ret = measure_current(info, &data); |
| 629 |
/* make sure that charging is launched by data > 0 */ |
| 630 |
if (ret || data < 0) |
| 631 |
goto out; |
| 632 |
|
| 633 |
ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data); |
| 634 |
if (ret) |
| 635 |
goto out; |
| 636 |
/* calculate resistor only in CC charge mode */ |
| 637 |
if (data < VBATT_RESISTOR_MIN || data > VBATT_RESISTOR_MAX) |
| 638 |
goto out; |
| 639 |
|
| 640 |
/* current is saved */ |
| 641 |
if (set_charger_current(info, 500, &chg_current)) |
| 642 |
goto out; |
| 643 |
|
| 644 |
/* |
| 645 |
* set charge current as 500mA, wait about 500ms till charging |
| 646 |
* process is launched and stable with the newer charging current. |
| 647 |
*/ |
| 648 |
msleep(500); |
| 649 |
|
| 650 |
for (i = 0, vbatt_sum1 = 0, ibatt_sum1 = 0; i < 10; i++) { |
| 651 |
ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data); |
| 652 |
if (ret) |
| 653 |
goto out_meas; |
| 654 |
vbatt_sum1 += data; |
| 655 |
ret = measure_current(info, &data); |
| 656 |
if (ret) |
| 657 |
goto out_meas; |
| 658 |
|
| 659 |
if (data < 0) |
| 660 |
ibatt_sum1 = ibatt_sum1 - data; /* discharging */ |
| 661 |
else |
| 662 |
ibatt_sum1 = ibatt_sum1 + data; /* charging */ |
| 663 |
} |
| 664 |
|
| 665 |
if (set_charger_current(info, 100, &ret)) |
| 666 |
goto out_meas; |
| 667 |
/* |
| 668 |
* set charge current as 100mA, wait about 500ms till charging |
| 669 |
* process is launched and stable with the newer charging current. |
| 670 |
*/ |
| 671 |
msleep(500); |
| 672 |
|
| 673 |
for (i = 0, vbatt_sum2 = 0, ibatt_sum2 = 0; i < 10; i++) { |
| 674 |
ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data); |
| 675 |
if (ret) |
| 676 |
goto out_meas; |
| 677 |
vbatt_sum2 += data; |
| 678 |
ret = measure_current(info, &data); |
| 679 |
if (ret) |
| 680 |
goto out_meas; |
| 681 |
|
| 682 |
if (data < 0) |
| 683 |
ibatt_sum2 = ibatt_sum2 - data; /* discharging */ |
| 684 |
else |
| 685 |
ibatt_sum2 = ibatt_sum2 + data; /* charging */ |
| 686 |
} |
| 687 |
|
| 688 |
/* restore current setting */ |
| 689 |
if (set_charger_current(info, chg_current, &ret)) |
| 690 |
goto out_meas; |
| 691 |
|
| 692 |
if ((vbatt_sum1 > vbatt_sum2) && (ibatt_sum1 > ibatt_sum2) && |
| 693 |
(ibatt_sum2 > 0)) { |
| 694 |
/* calculate resistor in discharging case */ |
| 695 |
data = 1000 * (vbatt_sum1 - vbatt_sum2) |
| 696 |
/ (ibatt_sum1 - ibatt_sum2); |
| 697 |
if ((data - info->resistor > 0) && |
| 698 |
(data - info->resistor < info->resistor)) |
| 699 |
info->resistor = data; |
| 700 |
if ((info->resistor - data > 0) && |
| 701 |
(info->resistor - data < data)) |
| 702 |
info->resistor = data; |
| 703 |
} |
| 704 |
return 0; |
| 705 |
|
| 706 |
out_meas: |
| 707 |
set_charger_current(info, chg_current, &ret); |
| 708 |
out: |
| 709 |
return -EINVAL; |
| 710 |
} |
| 711 |
|
| 712 |
static int calc_capacity(struct pm860x_battery_info *info, int *cap) |
| 713 |
{ |
| 714 |
int ret; |
| 715 |
int data; |
| 716 |
int ibat; |
| 717 |
int cap_ocv = 0; |
| 718 |
int cap_cc = 0; |
| 719 |
|
| 720 |
ret = calc_ccnt(info, &ccnt_data); |
| 721 |
if (ret) |
| 722 |
goto out; |
| 723 |
soc: |
| 724 |
data = info->max_capacity * info->start_soc / 100; |
| 725 |
if (ccnt_data.total_dischg - ccnt_data.total_chg <= data) { |
| 726 |
cap_cc = |
| 727 |
data + ccnt_data.total_chg - ccnt_data.total_dischg; |
| 728 |
} else { |
| 729 |
clear_ccnt(info, &ccnt_data); |
| 730 |
calc_soc(info, OCV_MODE_ACTIVE, &info->start_soc); |
| 731 |
dev_dbg(info->dev, "restart soc = %d !\n", |
| 732 |
info->start_soc); |
| 733 |
goto soc; |
| 734 |
} |
| 735 |
|
| 736 |
cap_cc = cap_cc * 100 / info->max_capacity; |
| 737 |
if (cap_cc < 0) |
| 738 |
cap_cc = 0; |
| 739 |
else if (cap_cc > 100) |
| 740 |
cap_cc = 100; |
| 741 |
|
| 742 |
dev_dbg(info->dev, "%s, last cap : %d", __func__, |
| 743 |
info->last_capacity); |
| 744 |
|
| 745 |
ret = measure_current(info, &ibat); |
| 746 |
if (ret) |
| 747 |
goto out; |
| 748 |
/* Calculate the capacity when discharging(ibat < 0) */ |
| 749 |
if (ibat < 0) { |
| 750 |
ret = calc_soc(info, OCV_MODE_ACTIVE, &cap_ocv); |
| 751 |
if (ret) |
| 752 |
cap_ocv = info->last_capacity; |
| 753 |
ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data); |
| 754 |
if (ret) |
| 755 |
goto out; |
| 756 |
if (data <= LOW_BAT_THRESHOLD) { |
| 757 |
/* choose the lower capacity value to report |
| 758 |
* between vbat and CC when vbat < 3.6v; |
| 759 |
* than 3.6v; |
| 760 |
*/ |
| 761 |
*cap = min(cap_ocv, cap_cc); |
| 762 |
} else { |
| 763 |
/* when detect vbat > 3.6v, but cap_cc < 15,and |
| 764 |
* cap_ocv is 10% larger than cap_cc, we can think |
| 765 |
* CC have some accumulation error, switch to OCV |
| 766 |
* to estimate capacity; |
| 767 |
* */ |
| 768 |
if (cap_cc < 15 && cap_ocv - cap_cc > 10) |
| 769 |
*cap = cap_ocv; |
| 770 |
else |
| 771 |
*cap = cap_cc; |
| 772 |
} |
| 773 |
/* when discharging, make sure current capacity |
| 774 |
* is lower than last*/ |
| 775 |
if (*cap > info->last_capacity) |
| 776 |
*cap = info->last_capacity; |
| 777 |
} else { |
| 778 |
*cap = cap_cc; |
| 779 |
} |
| 780 |
info->last_capacity = *cap; |
| 781 |
|
| 782 |
dev_dbg(info->dev, "%s, cap_ocv:%d cap_cc:%d, cap:%d\n", |
| 783 |
(ibat < 0) ? "discharging" : "charging", |
| 784 |
cap_ocv, cap_cc, *cap); |
| 785 |
/* |
| 786 |
* store the current capacity to RTC domain register, |
| 787 |
* after next power up , it will be restored. |
| 788 |
*/ |
| 789 |
pm860x_set_bits(info->i2c, PM8607_RTC_MISC2, RTC_SOC_5LSB, |
| 790 |
(*cap & 0x1F) << 3); |
| 791 |
pm860x_set_bits(info->i2c, PM8607_RTC1, RTC_SOC_3MSB, |
| 792 |
((*cap >> 5) & 0x3)); |
| 793 |
return 0; |
| 794 |
out: |
| 795 |
return ret; |
| 796 |
} |
| 797 |
|
| 798 |
static void pm860x_external_power_changed(struct power_supply *psy) |
| 799 |
{ |
| 800 |
struct pm860x_battery_info *info = dev_get_drvdata(psy->dev.parent); |
| 801 |
|
| 802 |
calc_resistor(info); |
| 803 |
} |
| 804 |
|
| 805 |
static int pm860x_batt_get_prop(struct power_supply *psy, |
| 806 |
enum power_supply_property psp, |
| 807 |
union power_supply_propval *val) |
| 808 |
{ |
| 809 |
struct pm860x_battery_info *info = dev_get_drvdata(psy->dev.parent); |
| 810 |
int data; |
| 811 |
int ret; |
| 812 |
|
| 813 |
switch (psp) { |
| 814 |
case POWER_SUPPLY_PROP_PRESENT: |
| 815 |
val->intval = info->present; |
| 816 |
break; |
| 817 |
case POWER_SUPPLY_PROP_CAPACITY: |
| 818 |
ret = calc_capacity(info, &data); |
| 819 |
if (ret) |
| 820 |
return ret; |
| 821 |
if (data < 0) |
| 822 |
data = 0; |
| 823 |
else if (data > 100) |
| 824 |
data = 100; |
| 825 |
/* return 100 if battery is not attached */ |
| 826 |
if (!info->present) |
| 827 |
data = 100; |
| 828 |
val->intval = data; |
| 829 |
break; |
| 830 |
case POWER_SUPPLY_PROP_TECHNOLOGY: |
| 831 |
val->intval = POWER_SUPPLY_TECHNOLOGY_LION; |
| 832 |
break; |
| 833 |
case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| 834 |
/* return real vbatt Voltage */ |
| 835 |
ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data); |
| 836 |
if (ret) |
| 837 |
return ret; |
| 838 |
val->intval = data * 1000; |
| 839 |
break; |
| 840 |
case POWER_SUPPLY_PROP_VOLTAGE_AVG: |
| 841 |
/* return Open Circuit Voltage (not measured voltage) */ |
| 842 |
ret = calc_ocv(info, &data); |
| 843 |
if (ret) |
| 844 |
return ret; |
| 845 |
val->intval = data * 1000; |
| 846 |
break; |
| 847 |
case POWER_SUPPLY_PROP_CURRENT_NOW: |
| 848 |
ret = measure_current(info, &data); |
| 849 |
if (ret) |
| 850 |
return ret; |
| 851 |
val->intval = data; |
| 852 |
break; |
| 853 |
case POWER_SUPPLY_PROP_TEMP: |
| 854 |
if (info->present) { |
| 855 |
ret = measure_temp(info, &data); |
| 856 |
if (ret) |
| 857 |
return ret; |
| 858 |
data *= 10; |
| 859 |
} else { |
| 860 |
/* Fake Temp 25C Without Battery */ |
| 861 |
data = 250; |
| 862 |
} |
| 863 |
val->intval = data; |
| 864 |
break; |
| 865 |
default: |
| 866 |
return -ENODEV; |
| 867 |
} |
| 868 |
return 0; |
| 869 |
} |
| 870 |
|
| 871 |
static int pm860x_batt_set_prop(struct power_supply *psy, |
| 872 |
enum power_supply_property psp, |
| 873 |
const union power_supply_propval *val) |
| 874 |
{ |
| 875 |
struct pm860x_battery_info *info = dev_get_drvdata(psy->dev.parent); |
| 876 |
|
| 877 |
switch (psp) { |
| 878 |
case POWER_SUPPLY_PROP_CHARGE_FULL: |
| 879 |
clear_ccnt(info, &ccnt_data); |
| 880 |
info->start_soc = 100; |
| 881 |
dev_dbg(info->dev, "chg done, update soc = %d\n", |
| 882 |
info->start_soc); |
| 883 |
break; |
| 884 |
default: |
| 885 |
return -EPERM; |
| 886 |
} |
| 887 |
|
| 888 |
return 0; |
| 889 |
} |
| 890 |
|
| 891 |
|
| 892 |
static enum power_supply_property pm860x_batt_props[] = { |
| 893 |
POWER_SUPPLY_PROP_PRESENT, |
| 894 |
POWER_SUPPLY_PROP_CAPACITY, |
| 895 |
POWER_SUPPLY_PROP_TECHNOLOGY, |
| 896 |
POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| 897 |
POWER_SUPPLY_PROP_VOLTAGE_AVG, |
| 898 |
POWER_SUPPLY_PROP_CURRENT_NOW, |
| 899 |
POWER_SUPPLY_PROP_TEMP, |
| 900 |
}; |
| 901 |
|
| 902 |
static const struct power_supply_desc pm860x_battery_desc = { |
| 903 |
.name = "battery-monitor", |
| 904 |
.type = POWER_SUPPLY_TYPE_BATTERY, |
| 905 |
.properties = pm860x_batt_props, |
| 906 |
.num_properties = ARRAY_SIZE(pm860x_batt_props), |
| 907 |
.get_property = pm860x_batt_get_prop, |
| 908 |
.set_property = pm860x_batt_set_prop, |
| 909 |
.external_power_changed = pm860x_external_power_changed, |
| 910 |
}; |
| 911 |
|
| 912 |
static int pm860x_battery_probe(struct platform_device *pdev) |
| 913 |
{ |
| 914 |
struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); |
| 915 |
struct pm860x_battery_info *info; |
| 916 |
struct pm860x_power_pdata *pdata; |
| 917 |
int ret; |
| 918 |
|
| 919 |
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); |
| 920 |
if (!info) |
| 921 |
return -ENOMEM; |
| 922 |
|
| 923 |
info->irq_cc = platform_get_irq(pdev, 0); |
| 924 |
if (info->irq_cc < 0) |
| 925 |
return info->irq_cc; |
| 926 |
|
| 927 |
info->irq_batt = platform_get_irq(pdev, 1); |
| 928 |
if (info->irq_batt < 0) |
| 929 |
return info->irq_batt; |
| 930 |
|
| 931 |
info->chip = chip; |
| 932 |
info->i2c = |
| 933 |
(chip->id == CHIP_PM8607) ? chip->client : chip->companion; |
| 934 |
info->dev = &pdev->dev; |
| 935 |
info->status = POWER_SUPPLY_STATUS_UNKNOWN; |
| 936 |
pdata = pdev->dev.platform_data; |
| 937 |
|
| 938 |
mutex_init(&info->lock); |
| 939 |
platform_set_drvdata(pdev, info); |
| 940 |
|
| 941 |
pm860x_init_battery(info); |
| 942 |
|
| 943 |
if (pdata && pdata->max_capacity) |
| 944 |
info->max_capacity = pdata->max_capacity; |
| 945 |
else |
| 946 |
info->max_capacity = 1500; /* set default capacity */ |
| 947 |
if (pdata && pdata->resistor) |
| 948 |
info->resistor = pdata->resistor; |
| 949 |
else |
| 950 |
info->resistor = 300; /* set default internal resistor */ |
| 951 |
|
| 952 |
info->battery = devm_power_supply_register(&pdev->dev, |
| 953 |
&pm860x_battery_desc, |
| 954 |
NULL); |
| 955 |
if (IS_ERR(info->battery)) |
| 956 |
return PTR_ERR(info->battery); |
| 957 |
info->battery->dev.parent = &pdev->dev; |
| 958 |
|
| 959 |
ret = devm_request_threaded_irq(chip->dev, info->irq_cc, NULL, |
| 960 |
pm860x_coulomb_handler, IRQF_ONESHOT, |
| 961 |
"coulomb", info); |
| 962 |
if (ret < 0) { |
| 963 |
dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n", |
| 964 |
info->irq_cc, ret); |
| 965 |
return ret; |
| 966 |
} |
| 967 |
|
| 968 |
ret = devm_request_threaded_irq(chip->dev, info->irq_batt, NULL, |
| 969 |
pm860x_batt_handler, |
| 970 |
IRQF_ONESHOT, "battery", info); |
| 971 |
if (ret < 0) { |
| 972 |
dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n", |
| 973 |
info->irq_batt, ret); |
| 974 |
return ret; |
| 975 |
} |
| 976 |
|
| 977 |
|
| 978 |
return 0; |
| 979 |
} |
| 980 |
|
| 981 |
#ifdef CONFIG_PM_SLEEP |
| 982 |
static int pm860x_battery_suspend(struct device *dev) |
| 983 |
{ |
| 984 |
struct platform_device *pdev = to_platform_device(dev); |
| 985 |
struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); |
| 986 |
|
| 987 |
if (device_may_wakeup(dev)) |
| 988 |
chip->wakeup_flag |= 1 << PM8607_IRQ_CC; |
| 989 |
return 0; |
| 990 |
} |
| 991 |
|
| 992 |
static int pm860x_battery_resume(struct device *dev) |
| 993 |
{ |
| 994 |
struct platform_device *pdev = to_platform_device(dev); |
| 995 |
struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); |
| 996 |
|
| 997 |
if (device_may_wakeup(dev)) |
| 998 |
chip->wakeup_flag &= ~(1 << PM8607_IRQ_CC); |
| 999 |
return 0; |
| 1000 |
} |
| 1001 |
#endif |
| 1002 |
|
| 1003 |
static SIMPLE_DEV_PM_OPS(pm860x_battery_pm_ops, |
| 1004 |
pm860x_battery_suspend, pm860x_battery_resume); |
| 1005 |
|
| 1006 |
static struct platform_driver pm860x_battery_driver = { |
| 1007 |
.driver = { |
| 1008 |
.name = "88pm860x-battery", |
| 1009 |
.pm = &pm860x_battery_pm_ops, |
| 1010 |
}, |
| 1011 |
.probe = pm860x_battery_probe, |
| 1012 |
}; |
| 1013 |
module_platform_driver(pm860x_battery_driver); |
| 1014 |
|
| 1015 |
MODULE_DESCRIPTION("Marvell 88PM860x Battery driver"); |
| 1016 |
MODULE_LICENSE("GPL"); |