| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* 1-wire client/driver for the Maxim/Dallas DS2781 Stand-Alone Fuel Gauge IC |
| 4 |
* |
| 5 |
* Author: Renata Sayakhova <[email protected]> |
| 6 |
* |
| 7 |
* Based on ds2780_battery drivers |
| 8 |
*/ |
| 9 |
|
| 10 |
#include <linux/module.h> |
| 11 |
#include <linux/slab.h> |
| 12 |
#include <linux/param.h> |
| 13 |
#include <linux/pm.h> |
| 14 |
#include <linux/platform_device.h> |
| 15 |
#include <linux/power_supply.h> |
| 16 |
#include <linux/idr.h> |
| 17 |
|
| 18 |
#include <linux/w1.h> |
| 19 |
#include "../../w1/slaves/w1_ds2781.h" |
| 20 |
|
| 21 |
/* Current unit measurement in uA for a 1 milli-ohm sense resistor */ |
| 22 |
#define DS2781_CURRENT_UNITS 1563 |
| 23 |
/* Charge unit measurement in uAh for a 1 milli-ohm sense resistor */ |
| 24 |
#define DS2781_CHARGE_UNITS 6250 |
| 25 |
/* Number of bytes in user EEPROM space */ |
| 26 |
#define DS2781_USER_EEPROM_SIZE (DS2781_EEPROM_BLOCK0_END - \ |
| 27 |
DS2781_EEPROM_BLOCK0_START + 1) |
| 28 |
/* Number of bytes in parameter EEPROM space */ |
| 29 |
#define DS2781_PARAM_EEPROM_SIZE (DS2781_EEPROM_BLOCK1_END - \ |
| 30 |
DS2781_EEPROM_BLOCK1_START + 1) |
| 31 |
|
| 32 |
struct ds2781_device_info { |
| 33 |
struct device *dev; |
| 34 |
struct power_supply *bat; |
| 35 |
struct power_supply_desc bat_desc; |
| 36 |
struct device *w1_dev; |
| 37 |
}; |
| 38 |
|
| 39 |
enum current_types { |
| 40 |
CURRENT_NOW, |
| 41 |
CURRENT_AVG, |
| 42 |
}; |
| 43 |
|
| 44 |
static const char model[] = "DS2781"; |
| 45 |
static const char manufacturer[] = "Maxim/Dallas"; |
| 46 |
|
| 47 |
static inline struct ds2781_device_info * |
| 48 |
to_ds2781_device_info(struct power_supply *psy) |
| 49 |
{ |
| 50 |
return power_supply_get_drvdata(psy); |
| 51 |
} |
| 52 |
|
| 53 |
static inline int ds2781_battery_io(struct ds2781_device_info *dev_info, |
| 54 |
char *buf, int addr, size_t count, int io) |
| 55 |
{ |
| 56 |
return w1_ds2781_io(dev_info->w1_dev, buf, addr, count, io); |
| 57 |
} |
| 58 |
|
| 59 |
static int w1_ds2781_read(struct ds2781_device_info *dev_info, char *buf, |
| 60 |
int addr, size_t count) |
| 61 |
{ |
| 62 |
return ds2781_battery_io(dev_info, buf, addr, count, 0); |
| 63 |
} |
| 64 |
|
| 65 |
static inline int ds2781_read8(struct ds2781_device_info *dev_info, u8 *val, |
| 66 |
int addr) |
| 67 |
{ |
| 68 |
return ds2781_battery_io(dev_info, val, addr, sizeof(u8), 0); |
| 69 |
} |
| 70 |
|
| 71 |
static int ds2781_read16(struct ds2781_device_info *dev_info, s16 *val, |
| 72 |
int addr) |
| 73 |
{ |
| 74 |
int ret; |
| 75 |
u8 raw[2]; |
| 76 |
|
| 77 |
ret = ds2781_battery_io(dev_info, raw, addr, sizeof(raw), 0); |
| 78 |
if (ret < 0) |
| 79 |
return ret; |
| 80 |
|
| 81 |
*val = (raw[0] << 8) | raw[1]; |
| 82 |
|
| 83 |
return 0; |
| 84 |
} |
| 85 |
|
| 86 |
static inline int ds2781_read_block(struct ds2781_device_info *dev_info, |
| 87 |
u8 *val, int addr, size_t count) |
| 88 |
{ |
| 89 |
return ds2781_battery_io(dev_info, val, addr, count, 0); |
| 90 |
} |
| 91 |
|
| 92 |
static inline int ds2781_write(struct ds2781_device_info *dev_info, u8 *val, |
| 93 |
int addr, size_t count) |
| 94 |
{ |
| 95 |
return ds2781_battery_io(dev_info, val, addr, count, 1); |
| 96 |
} |
| 97 |
|
| 98 |
static inline int ds2781_store_eeprom(struct device *dev, int addr) |
| 99 |
{ |
| 100 |
return w1_ds2781_eeprom_cmd(dev, addr, W1_DS2781_COPY_DATA); |
| 101 |
} |
| 102 |
|
| 103 |
static inline int ds2781_recall_eeprom(struct device *dev, int addr) |
| 104 |
{ |
| 105 |
return w1_ds2781_eeprom_cmd(dev, addr, W1_DS2781_RECALL_DATA); |
| 106 |
} |
| 107 |
|
| 108 |
static int ds2781_save_eeprom(struct ds2781_device_info *dev_info, int reg) |
| 109 |
{ |
| 110 |
int ret; |
| 111 |
|
| 112 |
ret = ds2781_store_eeprom(dev_info->w1_dev, reg); |
| 113 |
if (ret < 0) |
| 114 |
return ret; |
| 115 |
|
| 116 |
ret = ds2781_recall_eeprom(dev_info->w1_dev, reg); |
| 117 |
if (ret < 0) |
| 118 |
return ret; |
| 119 |
|
| 120 |
return 0; |
| 121 |
} |
| 122 |
|
| 123 |
/* Set sense resistor value in mhos */ |
| 124 |
static int ds2781_set_sense_register(struct ds2781_device_info *dev_info, |
| 125 |
u8 conductance) |
| 126 |
{ |
| 127 |
int ret; |
| 128 |
|
| 129 |
ret = ds2781_write(dev_info, &conductance, |
| 130 |
DS2781_RSNSP, sizeof(u8)); |
| 131 |
if (ret < 0) |
| 132 |
return ret; |
| 133 |
|
| 134 |
return ds2781_save_eeprom(dev_info, DS2781_RSNSP); |
| 135 |
} |
| 136 |
|
| 137 |
/* Get RSGAIN value from 0 to 1.999 in steps of 0.001 */ |
| 138 |
static int ds2781_get_rsgain_register(struct ds2781_device_info *dev_info, |
| 139 |
u16 *rsgain) |
| 140 |
{ |
| 141 |
return ds2781_read16(dev_info, rsgain, DS2781_RSGAIN_MSB); |
| 142 |
} |
| 143 |
|
| 144 |
/* Set RSGAIN value from 0 to 1.999 in steps of 0.001 */ |
| 145 |
static int ds2781_set_rsgain_register(struct ds2781_device_info *dev_info, |
| 146 |
u16 rsgain) |
| 147 |
{ |
| 148 |
int ret; |
| 149 |
u8 raw[] = {rsgain >> 8, rsgain & 0xFF}; |
| 150 |
|
| 151 |
ret = ds2781_write(dev_info, raw, |
| 152 |
DS2781_RSGAIN_MSB, sizeof(raw)); |
| 153 |
if (ret < 0) |
| 154 |
return ret; |
| 155 |
|
| 156 |
return ds2781_save_eeprom(dev_info, DS2781_RSGAIN_MSB); |
| 157 |
} |
| 158 |
|
| 159 |
static int ds2781_get_voltage(struct ds2781_device_info *dev_info, |
| 160 |
int *voltage_uV) |
| 161 |
{ |
| 162 |
int ret; |
| 163 |
char val[2]; |
| 164 |
int voltage_raw; |
| 165 |
|
| 166 |
ret = w1_ds2781_read(dev_info, val, DS2781_VOLT_MSB, 2 * sizeof(u8)); |
| 167 |
if (ret < 0) |
| 168 |
return ret; |
| 169 |
/* |
| 170 |
* The voltage value is located in 10 bits across the voltage MSB |
| 171 |
* and LSB registers in two's complement form |
| 172 |
* Sign bit of the voltage value is in bit 7 of the voltage MSB register |
| 173 |
* Bits 9 - 3 of the voltage value are in bits 6 - 0 of the |
| 174 |
* voltage MSB register |
| 175 |
* Bits 2 - 0 of the voltage value are in bits 7 - 5 of the |
| 176 |
* voltage LSB register |
| 177 |
*/ |
| 178 |
voltage_raw = (val[0] << 3) | |
| 179 |
(val[1] >> 5); |
| 180 |
|
| 181 |
/* DS2781 reports voltage in units of 9.76mV, but the battery class |
| 182 |
* reports in units of uV, so convert by multiplying by 9760. */ |
| 183 |
*voltage_uV = voltage_raw * 9760; |
| 184 |
|
| 185 |
return 0; |
| 186 |
} |
| 187 |
|
| 188 |
static int ds2781_get_temperature(struct ds2781_device_info *dev_info, |
| 189 |
int *temp) |
| 190 |
{ |
| 191 |
int ret; |
| 192 |
char val[2]; |
| 193 |
int temp_raw; |
| 194 |
|
| 195 |
ret = w1_ds2781_read(dev_info, val, DS2781_TEMP_MSB, 2 * sizeof(u8)); |
| 196 |
if (ret < 0) |
| 197 |
return ret; |
| 198 |
/* |
| 199 |
* The temperature value is located in 10 bits across the temperature |
| 200 |
* MSB and LSB registers in two's complement form |
| 201 |
* Sign bit of the temperature value is in bit 7 of the temperature |
| 202 |
* MSB register |
| 203 |
* Bits 9 - 3 of the temperature value are in bits 6 - 0 of the |
| 204 |
* temperature MSB register |
| 205 |
* Bits 2 - 0 of the temperature value are in bits 7 - 5 of the |
| 206 |
* temperature LSB register |
| 207 |
*/ |
| 208 |
temp_raw = ((val[0]) << 3) | |
| 209 |
(val[1] >> 5); |
| 210 |
*temp = temp_raw + (temp_raw / 4); |
| 211 |
|
| 212 |
return 0; |
| 213 |
} |
| 214 |
|
| 215 |
static int ds2781_get_current(struct ds2781_device_info *dev_info, |
| 216 |
enum current_types type, int *current_uA) |
| 217 |
{ |
| 218 |
int ret, sense_res; |
| 219 |
s16 current_raw; |
| 220 |
u8 sense_res_raw, reg_msb; |
| 221 |
|
| 222 |
/* |
| 223 |
* The units of measurement for current are dependent on the value of |
| 224 |
* the sense resistor. |
| 225 |
*/ |
| 226 |
ret = ds2781_read8(dev_info, &sense_res_raw, DS2781_RSNSP); |
| 227 |
if (ret < 0) |
| 228 |
return ret; |
| 229 |
|
| 230 |
if (sense_res_raw == 0) { |
| 231 |
dev_err(dev_info->dev, "sense resistor value is 0\n"); |
| 232 |
return -EINVAL; |
| 233 |
} |
| 234 |
sense_res = 1000 / sense_res_raw; |
| 235 |
|
| 236 |
if (type == CURRENT_NOW) |
| 237 |
reg_msb = DS2781_CURRENT_MSB; |
| 238 |
else if (type == CURRENT_AVG) |
| 239 |
reg_msb = DS2781_IAVG_MSB; |
| 240 |
else |
| 241 |
return -EINVAL; |
| 242 |
|
| 243 |
/* |
| 244 |
* The current value is located in 16 bits across the current MSB |
| 245 |
* and LSB registers in two's complement form |
| 246 |
* Sign bit of the current value is in bit 7 of the current MSB register |
| 247 |
* Bits 14 - 8 of the current value are in bits 6 - 0 of the current |
| 248 |
* MSB register |
| 249 |
* Bits 7 - 0 of the current value are in bits 7 - 0 of the current |
| 250 |
* LSB register |
| 251 |
*/ |
| 252 |
ret = ds2781_read16(dev_info, ¤t_raw, reg_msb); |
| 253 |
if (ret < 0) |
| 254 |
return ret; |
| 255 |
|
| 256 |
*current_uA = current_raw * (DS2781_CURRENT_UNITS / sense_res); |
| 257 |
return 0; |
| 258 |
} |
| 259 |
|
| 260 |
static int ds2781_get_accumulated_current(struct ds2781_device_info *dev_info, |
| 261 |
int *accumulated_current) |
| 262 |
{ |
| 263 |
int ret, sense_res; |
| 264 |
s16 current_raw; |
| 265 |
u8 sense_res_raw; |
| 266 |
|
| 267 |
/* |
| 268 |
* The units of measurement for accumulated current are dependent on |
| 269 |
* the value of the sense resistor. |
| 270 |
*/ |
| 271 |
ret = ds2781_read8(dev_info, &sense_res_raw, DS2781_RSNSP); |
| 272 |
if (ret < 0) |
| 273 |
return ret; |
| 274 |
|
| 275 |
if (sense_res_raw == 0) { |
| 276 |
dev_err(dev_info->dev, "sense resistor value is 0\n"); |
| 277 |
return -EINVAL; |
| 278 |
} |
| 279 |
sense_res = 1000 / sense_res_raw; |
| 280 |
|
| 281 |
/* |
| 282 |
* The ACR value is located in 16 bits across the ACR MSB and |
| 283 |
* LSB registers |
| 284 |
* Bits 15 - 8 of the ACR value are in bits 7 - 0 of the ACR |
| 285 |
* MSB register |
| 286 |
* Bits 7 - 0 of the ACR value are in bits 7 - 0 of the ACR |
| 287 |
* LSB register |
| 288 |
*/ |
| 289 |
ret = ds2781_read16(dev_info, ¤t_raw, DS2781_ACR_MSB); |
| 290 |
if (ret < 0) |
| 291 |
return ret; |
| 292 |
|
| 293 |
*accumulated_current = current_raw * (DS2781_CHARGE_UNITS / sense_res); |
| 294 |
return 0; |
| 295 |
} |
| 296 |
|
| 297 |
static int ds2781_get_capacity(struct ds2781_device_info *dev_info, |
| 298 |
int *capacity) |
| 299 |
{ |
| 300 |
int ret; |
| 301 |
u8 raw; |
| 302 |
|
| 303 |
ret = ds2781_read8(dev_info, &raw, DS2781_RARC); |
| 304 |
if (ret < 0) |
| 305 |
return ret; |
| 306 |
|
| 307 |
*capacity = raw; |
| 308 |
return 0; |
| 309 |
} |
| 310 |
|
| 311 |
static int ds2781_get_status(struct ds2781_device_info *dev_info, int *status) |
| 312 |
{ |
| 313 |
int ret, current_uA, capacity; |
| 314 |
|
| 315 |
ret = ds2781_get_current(dev_info, CURRENT_NOW, ¤t_uA); |
| 316 |
if (ret < 0) |
| 317 |
return ret; |
| 318 |
|
| 319 |
ret = ds2781_get_capacity(dev_info, &capacity); |
| 320 |
if (ret < 0) |
| 321 |
return ret; |
| 322 |
|
| 323 |
if (power_supply_am_i_supplied(dev_info->bat)) { |
| 324 |
if (capacity == 100) |
| 325 |
*status = POWER_SUPPLY_STATUS_FULL; |
| 326 |
else if (current_uA > 50000) |
| 327 |
*status = POWER_SUPPLY_STATUS_CHARGING; |
| 328 |
else |
| 329 |
*status = POWER_SUPPLY_STATUS_NOT_CHARGING; |
| 330 |
} else { |
| 331 |
*status = POWER_SUPPLY_STATUS_DISCHARGING; |
| 332 |
} |
| 333 |
return 0; |
| 334 |
} |
| 335 |
|
| 336 |
static int ds2781_get_charge_now(struct ds2781_device_info *dev_info, |
| 337 |
int *charge_now) |
| 338 |
{ |
| 339 |
int ret; |
| 340 |
u16 charge_raw; |
| 341 |
|
| 342 |
/* |
| 343 |
* The RAAC value is located in 16 bits across the RAAC MSB and |
| 344 |
* LSB registers |
| 345 |
* Bits 15 - 8 of the RAAC value are in bits 7 - 0 of the RAAC |
| 346 |
* MSB register |
| 347 |
* Bits 7 - 0 of the RAAC value are in bits 7 - 0 of the RAAC |
| 348 |
* LSB register |
| 349 |
*/ |
| 350 |
ret = ds2781_read16(dev_info, &charge_raw, DS2781_RAAC_MSB); |
| 351 |
if (ret < 0) |
| 352 |
return ret; |
| 353 |
|
| 354 |
*charge_now = charge_raw * 1600; |
| 355 |
return 0; |
| 356 |
} |
| 357 |
|
| 358 |
static int ds2781_get_control_register(struct ds2781_device_info *dev_info, |
| 359 |
u8 *control_reg) |
| 360 |
{ |
| 361 |
return ds2781_read8(dev_info, control_reg, DS2781_CONTROL); |
| 362 |
} |
| 363 |
|
| 364 |
static int ds2781_set_control_register(struct ds2781_device_info *dev_info, |
| 365 |
u8 control_reg) |
| 366 |
{ |
| 367 |
int ret; |
| 368 |
|
| 369 |
ret = ds2781_write(dev_info, &control_reg, |
| 370 |
DS2781_CONTROL, sizeof(u8)); |
| 371 |
if (ret < 0) |
| 372 |
return ret; |
| 373 |
|
| 374 |
return ds2781_save_eeprom(dev_info, DS2781_CONTROL); |
| 375 |
} |
| 376 |
|
| 377 |
static int ds2781_battery_get_property(struct power_supply *psy, |
| 378 |
enum power_supply_property psp, |
| 379 |
union power_supply_propval *val) |
| 380 |
{ |
| 381 |
int ret = 0; |
| 382 |
struct ds2781_device_info *dev_info = to_ds2781_device_info(psy); |
| 383 |
|
| 384 |
switch (psp) { |
| 385 |
case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| 386 |
ret = ds2781_get_voltage(dev_info, &val->intval); |
| 387 |
break; |
| 388 |
|
| 389 |
case POWER_SUPPLY_PROP_TEMP: |
| 390 |
ret = ds2781_get_temperature(dev_info, &val->intval); |
| 391 |
break; |
| 392 |
|
| 393 |
case POWER_SUPPLY_PROP_MODEL_NAME: |
| 394 |
val->strval = model; |
| 395 |
break; |
| 396 |
|
| 397 |
case POWER_SUPPLY_PROP_MANUFACTURER: |
| 398 |
val->strval = manufacturer; |
| 399 |
break; |
| 400 |
|
| 401 |
case POWER_SUPPLY_PROP_CURRENT_NOW: |
| 402 |
ret = ds2781_get_current(dev_info, CURRENT_NOW, &val->intval); |
| 403 |
break; |
| 404 |
|
| 405 |
case POWER_SUPPLY_PROP_CURRENT_AVG: |
| 406 |
ret = ds2781_get_current(dev_info, CURRENT_AVG, &val->intval); |
| 407 |
break; |
| 408 |
|
| 409 |
case POWER_SUPPLY_PROP_STATUS: |
| 410 |
ret = ds2781_get_status(dev_info, &val->intval); |
| 411 |
break; |
| 412 |
|
| 413 |
case POWER_SUPPLY_PROP_CAPACITY: |
| 414 |
ret = ds2781_get_capacity(dev_info, &val->intval); |
| 415 |
break; |
| 416 |
|
| 417 |
case POWER_SUPPLY_PROP_CHARGE_COUNTER: |
| 418 |
ret = ds2781_get_accumulated_current(dev_info, &val->intval); |
| 419 |
break; |
| 420 |
|
| 421 |
case POWER_SUPPLY_PROP_CHARGE_NOW: |
| 422 |
ret = ds2781_get_charge_now(dev_info, &val->intval); |
| 423 |
break; |
| 424 |
|
| 425 |
default: |
| 426 |
ret = -EINVAL; |
| 427 |
} |
| 428 |
|
| 429 |
return ret; |
| 430 |
} |
| 431 |
|
| 432 |
static enum power_supply_property ds2781_battery_props[] = { |
| 433 |
POWER_SUPPLY_PROP_STATUS, |
| 434 |
POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| 435 |
POWER_SUPPLY_PROP_TEMP, |
| 436 |
POWER_SUPPLY_PROP_MODEL_NAME, |
| 437 |
POWER_SUPPLY_PROP_MANUFACTURER, |
| 438 |
POWER_SUPPLY_PROP_CURRENT_NOW, |
| 439 |
POWER_SUPPLY_PROP_CURRENT_AVG, |
| 440 |
POWER_SUPPLY_PROP_CAPACITY, |
| 441 |
POWER_SUPPLY_PROP_CHARGE_COUNTER, |
| 442 |
POWER_SUPPLY_PROP_CHARGE_NOW, |
| 443 |
}; |
| 444 |
|
| 445 |
static ssize_t ds2781_get_pmod_enabled(struct device *dev, |
| 446 |
struct device_attribute *attr, |
| 447 |
char *buf) |
| 448 |
{ |
| 449 |
int ret; |
| 450 |
u8 control_reg; |
| 451 |
struct power_supply *psy = to_power_supply(dev); |
| 452 |
struct ds2781_device_info *dev_info = to_ds2781_device_info(psy); |
| 453 |
|
| 454 |
/* Get power mode */ |
| 455 |
ret = ds2781_get_control_register(dev_info, &control_reg); |
| 456 |
if (ret < 0) |
| 457 |
return ret; |
| 458 |
|
| 459 |
return sysfs_emit(buf, "%d\n", |
| 460 |
!!(control_reg & DS2781_CONTROL_PMOD)); |
| 461 |
} |
| 462 |
|
| 463 |
static ssize_t ds2781_set_pmod_enabled(struct device *dev, |
| 464 |
struct device_attribute *attr, |
| 465 |
const char *buf, |
| 466 |
size_t count) |
| 467 |
{ |
| 468 |
int ret; |
| 469 |
u8 control_reg, new_setting; |
| 470 |
struct power_supply *psy = to_power_supply(dev); |
| 471 |
struct ds2781_device_info *dev_info = to_ds2781_device_info(psy); |
| 472 |
|
| 473 |
/* Set power mode */ |
| 474 |
ret = ds2781_get_control_register(dev_info, &control_reg); |
| 475 |
if (ret < 0) |
| 476 |
return ret; |
| 477 |
|
| 478 |
ret = kstrtou8(buf, 0, &new_setting); |
| 479 |
if (ret < 0) |
| 480 |
return ret; |
| 481 |
|
| 482 |
if ((new_setting != 0) && (new_setting != 1)) { |
| 483 |
dev_err(dev_info->dev, "Invalid pmod setting (0 or 1)\n"); |
| 484 |
return -EINVAL; |
| 485 |
} |
| 486 |
|
| 487 |
if (new_setting) |
| 488 |
control_reg |= DS2781_CONTROL_PMOD; |
| 489 |
else |
| 490 |
control_reg &= ~DS2781_CONTROL_PMOD; |
| 491 |
|
| 492 |
ret = ds2781_set_control_register(dev_info, control_reg); |
| 493 |
if (ret < 0) |
| 494 |
return ret; |
| 495 |
|
| 496 |
return count; |
| 497 |
} |
| 498 |
|
| 499 |
static ssize_t ds2781_get_sense_resistor_value(struct device *dev, |
| 500 |
struct device_attribute *attr, |
| 501 |
char *buf) |
| 502 |
{ |
| 503 |
int ret; |
| 504 |
u8 sense_resistor; |
| 505 |
struct power_supply *psy = to_power_supply(dev); |
| 506 |
struct ds2781_device_info *dev_info = to_ds2781_device_info(psy); |
| 507 |
|
| 508 |
ret = ds2781_read8(dev_info, &sense_resistor, DS2781_RSNSP); |
| 509 |
if (ret < 0) |
| 510 |
return ret; |
| 511 |
|
| 512 |
ret = sysfs_emit(buf, "%d\n", sense_resistor); |
| 513 |
return ret; |
| 514 |
} |
| 515 |
|
| 516 |
static ssize_t ds2781_set_sense_resistor_value(struct device *dev, |
| 517 |
struct device_attribute *attr, |
| 518 |
const char *buf, |
| 519 |
size_t count) |
| 520 |
{ |
| 521 |
int ret; |
| 522 |
u8 new_setting; |
| 523 |
struct power_supply *psy = to_power_supply(dev); |
| 524 |
struct ds2781_device_info *dev_info = to_ds2781_device_info(psy); |
| 525 |
|
| 526 |
ret = kstrtou8(buf, 0, &new_setting); |
| 527 |
if (ret < 0) |
| 528 |
return ret; |
| 529 |
|
| 530 |
ret = ds2781_set_sense_register(dev_info, new_setting); |
| 531 |
if (ret < 0) |
| 532 |
return ret; |
| 533 |
|
| 534 |
return count; |
| 535 |
} |
| 536 |
|
| 537 |
static ssize_t ds2781_get_rsgain_setting(struct device *dev, |
| 538 |
struct device_attribute *attr, |
| 539 |
char *buf) |
| 540 |
{ |
| 541 |
int ret; |
| 542 |
u16 rsgain; |
| 543 |
struct power_supply *psy = to_power_supply(dev); |
| 544 |
struct ds2781_device_info *dev_info = to_ds2781_device_info(psy); |
| 545 |
|
| 546 |
ret = ds2781_get_rsgain_register(dev_info, &rsgain); |
| 547 |
if (ret < 0) |
| 548 |
return ret; |
| 549 |
|
| 550 |
return sysfs_emit(buf, "%d\n", rsgain); |
| 551 |
} |
| 552 |
|
| 553 |
static ssize_t ds2781_set_rsgain_setting(struct device *dev, |
| 554 |
struct device_attribute *attr, |
| 555 |
const char *buf, |
| 556 |
size_t count) |
| 557 |
{ |
| 558 |
int ret; |
| 559 |
u16 new_setting; |
| 560 |
struct power_supply *psy = to_power_supply(dev); |
| 561 |
struct ds2781_device_info *dev_info = to_ds2781_device_info(psy); |
| 562 |
|
| 563 |
ret = kstrtou16(buf, 0, &new_setting); |
| 564 |
if (ret < 0) |
| 565 |
return ret; |
| 566 |
|
| 567 |
/* Gain can only be from 0 to 1.999 in steps of .001 */ |
| 568 |
if (new_setting > 1999) { |
| 569 |
dev_err(dev_info->dev, "Invalid rsgain setting (0 - 1999)\n"); |
| 570 |
return -EINVAL; |
| 571 |
} |
| 572 |
|
| 573 |
ret = ds2781_set_rsgain_register(dev_info, new_setting); |
| 574 |
if (ret < 0) |
| 575 |
return ret; |
| 576 |
|
| 577 |
return count; |
| 578 |
} |
| 579 |
|
| 580 |
static ssize_t ds2781_get_pio_pin(struct device *dev, |
| 581 |
struct device_attribute *attr, |
| 582 |
char *buf) |
| 583 |
{ |
| 584 |
int ret; |
| 585 |
u8 sfr; |
| 586 |
struct power_supply *psy = to_power_supply(dev); |
| 587 |
struct ds2781_device_info *dev_info = to_ds2781_device_info(psy); |
| 588 |
|
| 589 |
ret = ds2781_read8(dev_info, &sfr, DS2781_SFR); |
| 590 |
if (ret < 0) |
| 591 |
return ret; |
| 592 |
|
| 593 |
ret = sysfs_emit(buf, "%d\n", sfr & DS2781_SFR_PIOSC); |
| 594 |
return ret; |
| 595 |
} |
| 596 |
|
| 597 |
static ssize_t ds2781_set_pio_pin(struct device *dev, |
| 598 |
struct device_attribute *attr, |
| 599 |
const char *buf, |
| 600 |
size_t count) |
| 601 |
{ |
| 602 |
int ret; |
| 603 |
u8 new_setting; |
| 604 |
struct power_supply *psy = to_power_supply(dev); |
| 605 |
struct ds2781_device_info *dev_info = to_ds2781_device_info(psy); |
| 606 |
|
| 607 |
ret = kstrtou8(buf, 0, &new_setting); |
| 608 |
if (ret < 0) |
| 609 |
return ret; |
| 610 |
|
| 611 |
if ((new_setting != 0) && (new_setting != 1)) { |
| 612 |
dev_err(dev_info->dev, "Invalid pio_pin setting (0 or 1)\n"); |
| 613 |
return -EINVAL; |
| 614 |
} |
| 615 |
|
| 616 |
ret = ds2781_write(dev_info, &new_setting, |
| 617 |
DS2781_SFR, sizeof(u8)); |
| 618 |
if (ret < 0) |
| 619 |
return ret; |
| 620 |
|
| 621 |
return count; |
| 622 |
} |
| 623 |
|
| 624 |
static ssize_t ds2781_read_param_eeprom_bin(struct file *filp, |
| 625 |
struct kobject *kobj, |
| 626 |
const struct bin_attribute *bin_attr, |
| 627 |
char *buf, loff_t off, size_t count) |
| 628 |
{ |
| 629 |
struct device *dev = kobj_to_dev(kobj); |
| 630 |
struct power_supply *psy = to_power_supply(dev); |
| 631 |
struct ds2781_device_info *dev_info = to_ds2781_device_info(psy); |
| 632 |
|
| 633 |
return ds2781_read_block(dev_info, buf, |
| 634 |
DS2781_EEPROM_BLOCK1_START + off, count); |
| 635 |
} |
| 636 |
|
| 637 |
static ssize_t ds2781_write_param_eeprom_bin(struct file *filp, |
| 638 |
struct kobject *kobj, |
| 639 |
const struct bin_attribute *bin_attr, |
| 640 |
char *buf, loff_t off, size_t count) |
| 641 |
{ |
| 642 |
struct device *dev = kobj_to_dev(kobj); |
| 643 |
struct power_supply *psy = to_power_supply(dev); |
| 644 |
struct ds2781_device_info *dev_info = to_ds2781_device_info(psy); |
| 645 |
int ret; |
| 646 |
|
| 647 |
ret = ds2781_write(dev_info, buf, |
| 648 |
DS2781_EEPROM_BLOCK1_START + off, count); |
| 649 |
if (ret < 0) |
| 650 |
return ret; |
| 651 |
|
| 652 |
ret = ds2781_save_eeprom(dev_info, DS2781_EEPROM_BLOCK1_START); |
| 653 |
if (ret < 0) |
| 654 |
return ret; |
| 655 |
|
| 656 |
return count; |
| 657 |
} |
| 658 |
|
| 659 |
static const struct bin_attribute ds2781_param_eeprom_bin_attr = { |
| 660 |
.attr = { |
| 661 |
.name = "param_eeprom", |
| 662 |
.mode = S_IRUGO | S_IWUSR, |
| 663 |
}, |
| 664 |
.size = DS2781_PARAM_EEPROM_SIZE, |
| 665 |
.read = ds2781_read_param_eeprom_bin, |
| 666 |
.write = ds2781_write_param_eeprom_bin, |
| 667 |
}; |
| 668 |
|
| 669 |
static ssize_t ds2781_read_user_eeprom_bin(struct file *filp, |
| 670 |
struct kobject *kobj, |
| 671 |
const struct bin_attribute *bin_attr, |
| 672 |
char *buf, loff_t off, size_t count) |
| 673 |
{ |
| 674 |
struct device *dev = kobj_to_dev(kobj); |
| 675 |
struct power_supply *psy = to_power_supply(dev); |
| 676 |
struct ds2781_device_info *dev_info = to_ds2781_device_info(psy); |
| 677 |
|
| 678 |
return ds2781_read_block(dev_info, buf, |
| 679 |
DS2781_EEPROM_BLOCK0_START + off, count); |
| 680 |
|
| 681 |
} |
| 682 |
|
| 683 |
static ssize_t ds2781_write_user_eeprom_bin(struct file *filp, |
| 684 |
struct kobject *kobj, |
| 685 |
const struct bin_attribute *bin_attr, |
| 686 |
char *buf, loff_t off, size_t count) |
| 687 |
{ |
| 688 |
struct device *dev = kobj_to_dev(kobj); |
| 689 |
struct power_supply *psy = to_power_supply(dev); |
| 690 |
struct ds2781_device_info *dev_info = to_ds2781_device_info(psy); |
| 691 |
int ret; |
| 692 |
|
| 693 |
ret = ds2781_write(dev_info, buf, |
| 694 |
DS2781_EEPROM_BLOCK0_START + off, count); |
| 695 |
if (ret < 0) |
| 696 |
return ret; |
| 697 |
|
| 698 |
ret = ds2781_save_eeprom(dev_info, DS2781_EEPROM_BLOCK0_START); |
| 699 |
if (ret < 0) |
| 700 |
return ret; |
| 701 |
|
| 702 |
return count; |
| 703 |
} |
| 704 |
|
| 705 |
static const struct bin_attribute ds2781_user_eeprom_bin_attr = { |
| 706 |
.attr = { |
| 707 |
.name = "user_eeprom", |
| 708 |
.mode = S_IRUGO | S_IWUSR, |
| 709 |
}, |
| 710 |
.size = DS2781_USER_EEPROM_SIZE, |
| 711 |
.read = ds2781_read_user_eeprom_bin, |
| 712 |
.write = ds2781_write_user_eeprom_bin, |
| 713 |
}; |
| 714 |
|
| 715 |
static DEVICE_ATTR(pmod_enabled, S_IRUGO | S_IWUSR, ds2781_get_pmod_enabled, |
| 716 |
ds2781_set_pmod_enabled); |
| 717 |
static DEVICE_ATTR(sense_resistor_value, S_IRUGO | S_IWUSR, |
| 718 |
ds2781_get_sense_resistor_value, ds2781_set_sense_resistor_value); |
| 719 |
static DEVICE_ATTR(rsgain_setting, S_IRUGO | S_IWUSR, ds2781_get_rsgain_setting, |
| 720 |
ds2781_set_rsgain_setting); |
| 721 |
static DEVICE_ATTR(pio_pin, S_IRUGO | S_IWUSR, ds2781_get_pio_pin, |
| 722 |
ds2781_set_pio_pin); |
| 723 |
|
| 724 |
static struct attribute *ds2781_sysfs_attrs[] = { |
| 725 |
&dev_attr_pmod_enabled.attr, |
| 726 |
&dev_attr_sense_resistor_value.attr, |
| 727 |
&dev_attr_rsgain_setting.attr, |
| 728 |
&dev_attr_pio_pin.attr, |
| 729 |
NULL |
| 730 |
}; |
| 731 |
|
| 732 |
static const struct bin_attribute *const ds2781_sysfs_bin_attrs[] = { |
| 733 |
&ds2781_param_eeprom_bin_attr, |
| 734 |
&ds2781_user_eeprom_bin_attr, |
| 735 |
NULL, |
| 736 |
}; |
| 737 |
|
| 738 |
static const struct attribute_group ds2781_sysfs_group = { |
| 739 |
.attrs = ds2781_sysfs_attrs, |
| 740 |
.bin_attrs = ds2781_sysfs_bin_attrs, |
| 741 |
|
| 742 |
}; |
| 743 |
|
| 744 |
static const struct attribute_group *ds2781_sysfs_groups[] = { |
| 745 |
&ds2781_sysfs_group, |
| 746 |
NULL, |
| 747 |
}; |
| 748 |
|
| 749 |
static int ds2781_battery_probe(struct platform_device *pdev) |
| 750 |
{ |
| 751 |
struct power_supply_config psy_cfg = {}; |
| 752 |
struct ds2781_device_info *dev_info; |
| 753 |
|
| 754 |
dev_info = devm_kzalloc(&pdev->dev, sizeof(*dev_info), GFP_KERNEL); |
| 755 |
if (!dev_info) |
| 756 |
return -ENOMEM; |
| 757 |
|
| 758 |
platform_set_drvdata(pdev, dev_info); |
| 759 |
|
| 760 |
dev_info->dev = &pdev->dev; |
| 761 |
dev_info->w1_dev = pdev->dev.parent; |
| 762 |
dev_info->bat_desc.name = dev_name(&pdev->dev); |
| 763 |
dev_info->bat_desc.type = POWER_SUPPLY_TYPE_BATTERY; |
| 764 |
dev_info->bat_desc.properties = ds2781_battery_props; |
| 765 |
dev_info->bat_desc.num_properties = ARRAY_SIZE(ds2781_battery_props); |
| 766 |
dev_info->bat_desc.get_property = ds2781_battery_get_property; |
| 767 |
|
| 768 |
psy_cfg.drv_data = dev_info; |
| 769 |
psy_cfg.attr_grp = ds2781_sysfs_groups; |
| 770 |
|
| 771 |
dev_info->bat = devm_power_supply_register(&pdev->dev, |
| 772 |
&dev_info->bat_desc, |
| 773 |
&psy_cfg); |
| 774 |
if (IS_ERR(dev_info->bat)) { |
| 775 |
dev_err(dev_info->dev, "failed to register battery\n"); |
| 776 |
return PTR_ERR(dev_info->bat); |
| 777 |
} |
| 778 |
|
| 779 |
return 0; |
| 780 |
} |
| 781 |
|
| 782 |
static struct platform_driver ds2781_battery_driver = { |
| 783 |
.driver = { |
| 784 |
.name = "ds2781-battery", |
| 785 |
}, |
| 786 |
.probe = ds2781_battery_probe, |
| 787 |
}; |
| 788 |
module_platform_driver(ds2781_battery_driver); |
| 789 |
|
| 790 |
MODULE_LICENSE("GPL"); |
| 791 |
MODULE_AUTHOR("Renata Sayakhova <[email protected]>"); |
| 792 |
MODULE_DESCRIPTION("Maxim/Dallas DS2781 Stand-Alone Fuel Gauge IC driver"); |
| 793 |
MODULE_ALIAS("platform:ds2781-battery"); |
| 794 |
|