| 1 |
/* SPDX-License-Identifier: GPL-2.0-only */ |
| 2 |
|
| 3 |
#ifndef _AB8500_CHARGER_H_ |
| 4 |
#define _AB8500_CHARGER_H_ |
| 5 |
|
| 6 |
#include <linux/kernel.h> |
| 7 |
|
| 8 |
/* |
| 9 |
* System control 2 register offsets. |
| 10 |
* bank = 0x02 |
| 11 |
*/ |
| 12 |
#define AB8500_MAIN_WDOG_CTRL_REG 0x01 |
| 13 |
#define AB8500_LOW_BAT_REG 0x03 |
| 14 |
#define AB8500_BATT_OK_REG 0x04 |
| 15 |
/* |
| 16 |
* USB/ULPI register offsets |
| 17 |
* Bank : 0x5 |
| 18 |
*/ |
| 19 |
#define AB8500_USB_LINE_STAT_REG 0x80 |
| 20 |
#define AB8500_USB_LINE_CTRL2_REG 0x82 |
| 21 |
#define AB8500_USB_LINK1_STAT_REG 0x94 |
| 22 |
|
| 23 |
/* |
| 24 |
* Charger / status register offfsets |
| 25 |
* Bank : 0x0B |
| 26 |
*/ |
| 27 |
#define AB8500_CH_STATUS1_REG 0x00 |
| 28 |
#define AB8500_CH_STATUS2_REG 0x01 |
| 29 |
#define AB8500_CH_USBCH_STAT1_REG 0x02 |
| 30 |
#define AB8500_CH_USBCH_STAT2_REG 0x03 |
| 31 |
#define AB8540_CH_USBCH_STAT3_REG 0x04 |
| 32 |
#define AB8500_CH_STAT_REG 0x05 |
| 33 |
|
| 34 |
/* |
| 35 |
* Charger / control register offfsets |
| 36 |
* Bank : 0x0B |
| 37 |
*/ |
| 38 |
#define AB8500_CH_VOLT_LVL_REG 0x40 |
| 39 |
#define AB8500_CH_VOLT_LVL_MAX_REG 0x41 /*Only in Cut2.0*/ |
| 40 |
#define AB8500_CH_OPT_CRNTLVL_REG 0x42 |
| 41 |
#define AB8500_CH_OPT_CRNTLVL_MAX_REG 0x43 /*Only in Cut2.0*/ |
| 42 |
#define AB8500_CH_WD_TIMER_REG 0x50 |
| 43 |
#define AB8500_CHARG_WD_CTRL 0x51 |
| 44 |
#define AB8500_BTEMP_HIGH_TH 0x52 |
| 45 |
#define AB8500_LED_INDICATOR_PWM_CTRL 0x53 |
| 46 |
#define AB8500_LED_INDICATOR_PWM_DUTY 0x54 |
| 47 |
#define AB8500_BATT_OVV 0x55 |
| 48 |
#define AB8500_CHARGER_CTRL 0x56 |
| 49 |
#define AB8500_BAT_CTRL_CURRENT_SOURCE 0x60 /*Only in Cut2.0*/ |
| 50 |
|
| 51 |
/* |
| 52 |
* Charger / main control register offsets |
| 53 |
* Bank : 0x0B |
| 54 |
*/ |
| 55 |
#define AB8500_MCH_CTRL1 0x80 |
| 56 |
#define AB8500_MCH_CTRL2 0x81 |
| 57 |
#define AB8500_MCH_IPT_CURLVL_REG 0x82 |
| 58 |
#define AB8500_CH_WD_REG 0x83 |
| 59 |
|
| 60 |
/* |
| 61 |
* Charger / USB control register offsets |
| 62 |
* Bank : 0x0B |
| 63 |
*/ |
| 64 |
#define AB8500_USBCH_CTRL1_REG 0xC0 |
| 65 |
#define AB8500_USBCH_CTRL2_REG 0xC1 |
| 66 |
#define AB8500_USBCH_IPT_CRNTLVL_REG 0xC2 |
| 67 |
#define AB8540_USB_PP_MODE_REG 0xC5 |
| 68 |
#define AB8540_USB_PP_CHR_REG 0xC6 |
| 69 |
|
| 70 |
/* |
| 71 |
* Gas Gauge register offsets |
| 72 |
* Bank : 0x0C |
| 73 |
*/ |
| 74 |
#define AB8500_GASG_CC_CTRL_REG 0x00 |
| 75 |
#define AB8500_GASG_CC_ACCU1_REG 0x01 |
| 76 |
#define AB8500_GASG_CC_ACCU2_REG 0x02 |
| 77 |
#define AB8500_GASG_CC_ACCU3_REG 0x03 |
| 78 |
#define AB8500_GASG_CC_ACCU4_REG 0x04 |
| 79 |
#define AB8500_GASG_CC_SMPL_CNTRL_REG 0x05 |
| 80 |
#define AB8500_GASG_CC_SMPL_CNTRH_REG 0x06 |
| 81 |
#define AB8500_GASG_CC_SMPL_CNVL_REG 0x07 |
| 82 |
#define AB8500_GASG_CC_SMPL_CNVH_REG 0x08 |
| 83 |
#define AB8500_GASG_CC_CNTR_AVGOFF_REG 0x09 |
| 84 |
#define AB8500_GASG_CC_OFFSET_REG 0x0A |
| 85 |
#define AB8500_GASG_CC_NCOV_ACCU 0x10 |
| 86 |
#define AB8500_GASG_CC_NCOV_ACCU_CTRL 0x11 |
| 87 |
#define AB8500_GASG_CC_NCOV_ACCU_LOW 0x12 |
| 88 |
#define AB8500_GASG_CC_NCOV_ACCU_MED 0x13 |
| 89 |
#define AB8500_GASG_CC_NCOV_ACCU_HIGH 0x14 |
| 90 |
|
| 91 |
/* |
| 92 |
* Interrupt register offsets |
| 93 |
* Bank : 0x0E |
| 94 |
*/ |
| 95 |
#define AB8500_IT_SOURCE2_REG 0x01 |
| 96 |
#define AB8500_IT_SOURCE21_REG 0x14 |
| 97 |
|
| 98 |
/* |
| 99 |
* RTC register offsets |
| 100 |
* Bank: 0x0F |
| 101 |
*/ |
| 102 |
#define AB8500_RTC_BACKUP_CHG_REG 0x0C |
| 103 |
#define AB8500_RTC_CC_CONF_REG 0x01 |
| 104 |
#define AB8500_RTC_CTRL_REG 0x0B |
| 105 |
#define AB8500_RTC_CTRL1_REG 0x11 |
| 106 |
|
| 107 |
/* |
| 108 |
* OTP register offsets |
| 109 |
* Bank : 0x15 |
| 110 |
*/ |
| 111 |
#define AB8500_OTP_CONF_15 0x0E |
| 112 |
|
| 113 |
/* GPADC constants from AB8500 spec, UM0836 */ |
| 114 |
#define ADC_RESOLUTION 1024 |
| 115 |
#define ADC_CH_MAIN_MIN 0 |
| 116 |
#define ADC_CH_MAIN_MAX 20030 |
| 117 |
#define ADC_CH_VBUS_MIN 0 |
| 118 |
#define ADC_CH_VBUS_MAX 20030 |
| 119 |
#define ADC_CH_VBAT_MIN 2300 |
| 120 |
#define ADC_CH_VBAT_MAX 4800 |
| 121 |
#define ADC_CH_BKBAT_MIN 0 |
| 122 |
#define ADC_CH_BKBAT_MAX 3200 |
| 123 |
|
| 124 |
/* Main charge i/p current */ |
| 125 |
#define MAIN_CH_IP_CUR_0P9A 0x80 |
| 126 |
#define MAIN_CH_IP_CUR_1P0A 0x90 |
| 127 |
#define MAIN_CH_IP_CUR_1P1A 0xA0 |
| 128 |
#define MAIN_CH_IP_CUR_1P2A 0xB0 |
| 129 |
#define MAIN_CH_IP_CUR_1P3A 0xC0 |
| 130 |
#define MAIN_CH_IP_CUR_1P4A 0xD0 |
| 131 |
#define MAIN_CH_IP_CUR_1P5A 0xE0 |
| 132 |
|
| 133 |
/* ChVoltLevel */ |
| 134 |
#define CH_VOL_LVL_3P5 0x00 |
| 135 |
#define CH_VOL_LVL_4P0 0x14 |
| 136 |
#define CH_VOL_LVL_4P05 0x16 |
| 137 |
#define CH_VOL_LVL_4P1 0x1B |
| 138 |
#define CH_VOL_LVL_4P15 0x20 |
| 139 |
#define CH_VOL_LVL_4P2 0x25 |
| 140 |
#define CH_VOL_LVL_4P6 0x4D |
| 141 |
|
| 142 |
/* ChOutputCurrentLevel */ |
| 143 |
#define CH_OP_CUR_LVL_0P1 0x00 |
| 144 |
#define CH_OP_CUR_LVL_0P2 0x01 |
| 145 |
#define CH_OP_CUR_LVL_0P3 0x02 |
| 146 |
#define CH_OP_CUR_LVL_0P4 0x03 |
| 147 |
#define CH_OP_CUR_LVL_0P5 0x04 |
| 148 |
#define CH_OP_CUR_LVL_0P6 0x05 |
| 149 |
#define CH_OP_CUR_LVL_0P7 0x06 |
| 150 |
#define CH_OP_CUR_LVL_0P8 0x07 |
| 151 |
#define CH_OP_CUR_LVL_0P9 0x08 |
| 152 |
#define CH_OP_CUR_LVL_1P4 0x0D |
| 153 |
#define CH_OP_CUR_LVL_1P5 0x0E |
| 154 |
#define CH_OP_CUR_LVL_1P6 0x0F |
| 155 |
#define CH_OP_CUR_LVL_2P 0x3F |
| 156 |
|
| 157 |
/* BTEMP High thermal limits */ |
| 158 |
#define BTEMP_HIGH_TH_57_0 0x00 |
| 159 |
#define BTEMP_HIGH_TH_52 0x01 |
| 160 |
#define BTEMP_HIGH_TH_57_1 0x02 |
| 161 |
#define BTEMP_HIGH_TH_62 0x03 |
| 162 |
|
| 163 |
#define LOW_BAT_3P1V 0x20 |
| 164 |
#define LOW_BAT_2P3V 0x00 |
| 165 |
#define LOW_BAT_RESET 0x01 |
| 166 |
#define LOW_BAT_ENABLE 0x01 |
| 167 |
|
| 168 |
/* Backup battery constants */ |
| 169 |
#define BUP_ICH_SEL_50UA 0x00 |
| 170 |
#define BUP_ICH_SEL_150UA 0x04 |
| 171 |
#define BUP_ICH_SEL_300UA 0x08 |
| 172 |
#define BUP_ICH_SEL_700UA 0x0C |
| 173 |
|
| 174 |
enum bup_vch_sel { |
| 175 |
BUP_VCH_SEL_2P5V, |
| 176 |
BUP_VCH_SEL_2P6V, |
| 177 |
BUP_VCH_SEL_2P8V, |
| 178 |
BUP_VCH_SEL_3P1V, |
| 179 |
/* |
| 180 |
* Note that the following 5 values 2.7v, 2.9v, 3.0v, 3.2v, 3.3v |
| 181 |
* are only available on ab8540. You can't choose these 5 |
| 182 |
* voltage on ab8500/ab8505/ab9540. |
| 183 |
*/ |
| 184 |
BUP_VCH_SEL_2P7V, |
| 185 |
BUP_VCH_SEL_2P9V, |
| 186 |
BUP_VCH_SEL_3P0V, |
| 187 |
BUP_VCH_SEL_3P2V, |
| 188 |
BUP_VCH_SEL_3P3V, |
| 189 |
}; |
| 190 |
|
| 191 |
#define BUP_VCH_RANGE 0x02 |
| 192 |
#define VBUP33_VRTCN 0x01 |
| 193 |
|
| 194 |
/* Battery OVV constants */ |
| 195 |
#define BATT_OVV_ENA 0x02 |
| 196 |
#define BATT_OVV_TH_3P7 0x00 |
| 197 |
#define BATT_OVV_TH_4P75 0x01 |
| 198 |
|
| 199 |
/* A value to indicate over voltage (microvolts) */ |
| 200 |
#define BATT_OVV_VALUE 4750000 |
| 201 |
|
| 202 |
/* VBUS OVV constants */ |
| 203 |
#define VBUS_OVV_SELECT_MASK 0x78 |
| 204 |
#define VBUS_OVV_SELECT_5P6V 0x00 |
| 205 |
#define VBUS_OVV_SELECT_5P7V 0x08 |
| 206 |
#define VBUS_OVV_SELECT_5P8V 0x10 |
| 207 |
#define VBUS_OVV_SELECT_5P9V 0x18 |
| 208 |
#define VBUS_OVV_SELECT_6P0V 0x20 |
| 209 |
#define VBUS_OVV_SELECT_6P1V 0x28 |
| 210 |
#define VBUS_OVV_SELECT_6P2V 0x30 |
| 211 |
#define VBUS_OVV_SELECT_6P3V 0x38 |
| 212 |
|
| 213 |
#define VBUS_AUTO_IN_CURR_LIM_ENA 0x04 |
| 214 |
|
| 215 |
/* Fuel Gauge constants */ |
| 216 |
#define RESET_ACCU 0x02 |
| 217 |
#define READ_REQ 0x01 |
| 218 |
#define CC_DEEP_SLEEP_ENA 0x02 |
| 219 |
#define CC_PWR_UP_ENA 0x01 |
| 220 |
#define CC_SAMPLES_40 0x28 |
| 221 |
#define RD_NCONV_ACCU_REQ 0x01 |
| 222 |
#define CC_CALIB 0x08 |
| 223 |
#define CC_INTAVGOFFSET_ENA 0x10 |
| 224 |
#define CC_MUXOFFSET 0x80 |
| 225 |
#define CC_INT_CAL_N_AVG_MASK 0x60 |
| 226 |
#define CC_INT_CAL_SAMPLES_16 0x40 |
| 227 |
#define CC_INT_CAL_SAMPLES_8 0x20 |
| 228 |
#define CC_INT_CAL_SAMPLES_4 0x00 |
| 229 |
|
| 230 |
/* RTC constants */ |
| 231 |
#define RTC_BUP_CH_ENA 0x10 |
| 232 |
|
| 233 |
/* BatCtrl Current Source Constants */ |
| 234 |
#define BAT_CTRL_7U_ENA 0x01 |
| 235 |
#define BAT_CTRL_20U_ENA 0x02 |
| 236 |
#define BAT_CTRL_18U_ENA 0x01 |
| 237 |
#define BAT_CTRL_16U_ENA 0x02 |
| 238 |
#define BAT_CTRL_CMP_ENA 0x04 |
| 239 |
#define FORCE_BAT_CTRL_CMP_HIGH 0x08 |
| 240 |
#define BAT_CTRL_PULL_UP_ENA 0x10 |
| 241 |
|
| 242 |
/* Battery type */ |
| 243 |
#define BATTERY_UNKNOWN 00 |
| 244 |
|
| 245 |
/* Registers for pcut feature in ab8505 and ab9540 */ |
| 246 |
#define AB8505_RTC_PCUT_CTL_STATUS_REG 0x12 |
| 247 |
#define AB8505_RTC_PCUT_TIME_REG 0x13 |
| 248 |
#define AB8505_RTC_PCUT_MAX_TIME_REG 0x14 |
| 249 |
#define AB8505_RTC_PCUT_FLAG_TIME_REG 0x15 |
| 250 |
#define AB8505_RTC_PCUT_RESTART_REG 0x16 |
| 251 |
#define AB8505_RTC_PCUT_DEBOUNCE_REG 0x17 |
| 252 |
|
| 253 |
/* USB Power Path constants for ab8540 */ |
| 254 |
#define BUS_VSYS_VOL_SELECT_MASK 0x06 |
| 255 |
#define BUS_VSYS_VOL_SELECT_3P6V 0x00 |
| 256 |
#define BUS_VSYS_VOL_SELECT_3P325V 0x02 |
| 257 |
#define BUS_VSYS_VOL_SELECT_3P9V 0x04 |
| 258 |
#define BUS_VSYS_VOL_SELECT_4P3V 0x06 |
| 259 |
#define BUS_POWER_PATH_MODE_ENA 0x01 |
| 260 |
#define BUS_PP_PRECHG_CURRENT_MASK 0x0E |
| 261 |
#define BUS_POWER_PATH_PRECHG_ENA 0x01 |
| 262 |
|
| 263 |
/* Forward declaration */ |
| 264 |
struct ab8500_fg; |
| 265 |
|
| 266 |
/** |
| 267 |
* struct ab8500_fg_parameters - Fuel gauge algorithm parameters, in seconds |
| 268 |
* if not specified |
| 269 |
* @recovery_sleep_timer: Time between measurements while recovering |
| 270 |
* @recovery_total_time: Total recovery time |
| 271 |
* @init_timer: Measurement interval during startup |
| 272 |
* @init_discard_time: Time we discard voltage measurement at startup |
| 273 |
* @init_total_time: Total init time during startup |
| 274 |
* @high_curr_time: Time current has to be high to go to recovery |
| 275 |
* @accu_charging: FG accumulation time while charging |
| 276 |
* @accu_high_curr_ua: FG accumulation time in high current mode |
| 277 |
* @high_curr_threshold_ua: High current threshold, in uA |
| 278 |
* @lowbat_threshold_uv: Low battery threshold, in uV |
| 279 |
* @battok_falling_th_sel0 Threshold in mV for battOk signal sel0 |
| 280 |
* Resolution in 50 mV step. |
| 281 |
* @battok_raising_th_sel1 Threshold in mV for battOk signal sel1 |
| 282 |
* Resolution in 50 mV step. |
| 283 |
* @user_cap_limit Capacity reported from user must be within this |
| 284 |
* limit to be considered as sane, in percentage |
| 285 |
* points. |
| 286 |
* @maint_thres This is the threshold where we stop reporting |
| 287 |
* battery full while in maintenance, in per cent |
| 288 |
* @pcut_enable: Enable power cut feature in ab8505 |
| 289 |
* @pcut_max_time: Max time threshold |
| 290 |
* @pcut_flag_time: Flagtime threshold |
| 291 |
* @pcut_max_restart: Max number of restarts |
| 292 |
* @pcut_debounce_time: Sets battery debounce time |
| 293 |
*/ |
| 294 |
struct ab8500_fg_parameters { |
| 295 |
int recovery_sleep_timer; |
| 296 |
int recovery_total_time; |
| 297 |
int init_timer; |
| 298 |
int init_discard_time; |
| 299 |
int init_total_time; |
| 300 |
int high_curr_time; |
| 301 |
int accu_charging; |
| 302 |
int accu_high_curr; |
| 303 |
int high_curr_threshold_ua; |
| 304 |
int lowbat_threshold_uv; |
| 305 |
int battok_falling_th_sel0; |
| 306 |
int battok_raising_th_sel1; |
| 307 |
int user_cap_limit; |
| 308 |
int maint_thres; |
| 309 |
bool pcut_enable; |
| 310 |
u8 pcut_max_time; |
| 311 |
u8 pcut_flag_time; |
| 312 |
u8 pcut_max_restart; |
| 313 |
u8 pcut_debounce_time; |
| 314 |
}; |
| 315 |
|
| 316 |
/** |
| 317 |
* struct ab8500_charger_maximization - struct used by the board config. |
| 318 |
* @use_maxi: Enable maximization for this battery type |
| 319 |
* @maxi_chg_curr_ua: Maximum charger current allowed in microampere |
| 320 |
* @maxi_wait_cycles: cycles to wait before setting charger current |
| 321 |
* @charger_curr_step_ua: delta between two charger current settings (uA) |
| 322 |
*/ |
| 323 |
struct ab8500_maxim_parameters { |
| 324 |
bool ena_maxi; |
| 325 |
int chg_curr_ua; |
| 326 |
int wait_cycles; |
| 327 |
int charger_curr_step_ua; |
| 328 |
}; |
| 329 |
|
| 330 |
/** |
| 331 |
* struct ab8500_bm_capacity_levels - ab8500 capacity level data |
| 332 |
* @critical: critical capacity level in percent |
| 333 |
* @low: low capacity level in percent |
| 334 |
* @normal: normal capacity level in percent |
| 335 |
* @high: high capacity level in percent |
| 336 |
* @full: full capacity level in percent |
| 337 |
*/ |
| 338 |
struct ab8500_bm_capacity_levels { |
| 339 |
int critical; |
| 340 |
int low; |
| 341 |
int normal; |
| 342 |
int high; |
| 343 |
int full; |
| 344 |
}; |
| 345 |
|
| 346 |
/** |
| 347 |
* struct ab8500_bm_charger_parameters - Charger specific parameters |
| 348 |
* @usb_volt_max_uv: maximum allowed USB charger voltage in uV |
| 349 |
* @usb_curr_max_ua: maximum allowed USB charger current in uA |
| 350 |
* @ac_volt_max_uv: maximum allowed AC charger voltage in uV |
| 351 |
* @ac_curr_max_ua: maximum allowed AC charger current in uA |
| 352 |
*/ |
| 353 |
struct ab8500_bm_charger_parameters { |
| 354 |
int usb_volt_max_uv; |
| 355 |
int usb_curr_max_ua; |
| 356 |
int ac_volt_max_uv; |
| 357 |
int ac_curr_max_ua; |
| 358 |
}; |
| 359 |
|
| 360 |
/** |
| 361 |
* struct ab8500_bm_data - ab8500 battery management data |
| 362 |
* @bi battery info from device tree |
| 363 |
* @temp_now present battery temperature |
| 364 |
* @temp_interval_chg temperature measurement interval in s when charging |
| 365 |
* @temp_interval_nochg temperature measurement interval in s when not charging |
| 366 |
* @main_safety_tmr_h safety timer for main charger |
| 367 |
* @usb_safety_tmr_h safety timer for usb charger |
| 368 |
* @bkup_bat_v voltage which we charge the backup battery with |
| 369 |
* @bkup_bat_i current which we charge the backup battery with |
| 370 |
* @capacity_scaling indicates whether capacity scaling is to be used |
| 371 |
* @chg_unknown_bat flag to enable charging of unknown batteries |
| 372 |
* @enable_overshoot flag to enable VBAT overshoot control |
| 373 |
* @auto_trig flag to enable auto adc trigger |
| 374 |
* @fg_res resistance of FG resistor in 0.1mOhm |
| 375 |
* @interval_charging charge alg cycle period time when charging (sec) |
| 376 |
* @interval_not_charging charge alg cycle period time when not charging (sec) |
| 377 |
* @temp_hysteresis temperature hysteresis |
| 378 |
* @maxi maximization parameters |
| 379 |
* @cap_levels capacity in percent for the different capacity levels |
| 380 |
* @chg_params charger parameters |
| 381 |
* @fg_params fuel gauge parameters |
| 382 |
*/ |
| 383 |
struct ab8500_bm_data { |
| 384 |
struct power_supply_battery_info *bi; |
| 385 |
int temp_now; |
| 386 |
int temp_interval_chg; |
| 387 |
int temp_interval_nochg; |
| 388 |
int main_safety_tmr_h; |
| 389 |
int usb_safety_tmr_h; |
| 390 |
int bkup_bat_v; |
| 391 |
int bkup_bat_i; |
| 392 |
bool capacity_scaling; |
| 393 |
bool chg_unknown_bat; |
| 394 |
bool enable_overshoot; |
| 395 |
bool auto_trig; |
| 396 |
int fg_res; |
| 397 |
int interval_charging; |
| 398 |
int interval_not_charging; |
| 399 |
int temp_hysteresis; |
| 400 |
const struct ab8500_maxim_parameters *maxi; |
| 401 |
const struct ab8500_bm_capacity_levels *cap_levels; |
| 402 |
const struct ab8500_bm_charger_parameters *chg_params; |
| 403 |
const struct ab8500_fg_parameters *fg_params; |
| 404 |
}; |
| 405 |
|
| 406 |
/* Forward declaration */ |
| 407 |
struct ab8500_fg; |
| 408 |
|
| 409 |
extern struct ab8500_bm_data ab8500_bm_data; |
| 410 |
|
| 411 |
void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA); |
| 412 |
struct ab8500_fg *ab8500_fg_get(void); |
| 413 |
int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev); |
| 414 |
int ab8500_fg_inst_curr_start(struct ab8500_fg *di); |
| 415 |
int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res); |
| 416 |
int ab8500_fg_inst_curr_started(struct ab8500_fg *di); |
| 417 |
int ab8500_fg_inst_curr_done(struct ab8500_fg *di); |
| 418 |
int ab8500_bm_of_probe(struct power_supply *psy, |
| 419 |
struct ab8500_bm_data *bm); |
| 420 |
void ab8500_bm_of_remove(struct power_supply *psy, |
| 421 |
struct ab8500_bm_data *bm); |
| 422 |
|
| 423 |
extern struct platform_driver ab8500_fg_driver; |
| 424 |
extern struct platform_driver ab8500_btemp_driver; |
| 425 |
extern struct platform_driver ab8500_chargalg_driver; |
| 426 |
|
| 427 |
#endif /* _AB8500_CHARGER_H_ */ |