| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Motorola CPCAP PMIC battery charger driver |
| 4 |
* |
| 5 |
* Copyright (C) 2017 Tony Lindgren <[email protected]> |
| 6 |
* |
| 7 |
* Rewritten for Linux power framework with some parts based on |
| 8 |
* earlier driver found in the Motorola Linux kernel: |
| 9 |
* |
| 10 |
* Copyright (C) 2009-2010 Motorola, Inc. |
| 11 |
*/ |
| 12 |
|
| 13 |
#include <linux/atomic.h> |
| 14 |
#include <linux/init.h> |
| 15 |
#include <linux/module.h> |
| 16 |
#include <linux/slab.h> |
| 17 |
#include <linux/string_choices.h> |
| 18 |
#include <linux/err.h> |
| 19 |
#include <linux/interrupt.h> |
| 20 |
#include <linux/notifier.h> |
| 21 |
#include <linux/mod_devicetable.h> |
| 22 |
#include <linux/platform_device.h> |
| 23 |
#include <linux/power_supply.h> |
| 24 |
#include <linux/regmap.h> |
| 25 |
|
| 26 |
#include <linux/gpio/consumer.h> |
| 27 |
#include <linux/usb/phy_companion.h> |
| 28 |
#include <linux/phy/omap_usb.h> |
| 29 |
#include <linux/usb/otg.h> |
| 30 |
#include <linux/iio/consumer.h> |
| 31 |
#include <linux/mfd/motorola-cpcap.h> |
| 32 |
|
| 33 |
/* |
| 34 |
* CPCAP_REG_CRM register bits. For documentation of somewhat similar hardware, |
| 35 |
* see NXP "MC13783 Power Management and Audio Circuit Users's Guide" |
| 36 |
* MC13783UG.pdf chapter "8.5 Battery Interface Register Summary". The registers |
| 37 |
* and values for CPCAP are different, but some of the internal components seem |
| 38 |
* similar. Also see the Motorola Linux kernel cpcap-regbits.h. CPCAP_REG_CHRGR_1 |
| 39 |
* bits that seem to describe the CRM register. |
| 40 |
*/ |
| 41 |
#define CPCAP_REG_CRM_UNUSED_641_15 BIT(15) /* 641 = register number */ |
| 42 |
#define CPCAP_REG_CRM_UNUSED_641_14 BIT(14) /* 641 = register number */ |
| 43 |
#define CPCAP_REG_CRM_CHRG_LED_EN BIT(13) /* Charger LED */ |
| 44 |
#define CPCAP_REG_CRM_RVRSMODE BIT(12) /* USB VBUS output enable */ |
| 45 |
#define CPCAP_REG_CRM_ICHRG_TR1 BIT(11) /* Trickle charge current */ |
| 46 |
#define CPCAP_REG_CRM_ICHRG_TR0 BIT(10) |
| 47 |
#define CPCAP_REG_CRM_FET_OVRD BIT(9) /* 0 = hardware, 1 = FET_CTRL */ |
| 48 |
#define CPCAP_REG_CRM_FET_CTRL BIT(8) /* BPFET 1 if FET_OVRD set */ |
| 49 |
#define CPCAP_REG_CRM_VCHRG3 BIT(7) /* Charge voltage bits */ |
| 50 |
#define CPCAP_REG_CRM_VCHRG2 BIT(6) |
| 51 |
#define CPCAP_REG_CRM_VCHRG1 BIT(5) |
| 52 |
#define CPCAP_REG_CRM_VCHRG0 BIT(4) |
| 53 |
#define CPCAP_REG_CRM_ICHRG3 BIT(3) /* Charge current bits */ |
| 54 |
#define CPCAP_REG_CRM_ICHRG2 BIT(2) |
| 55 |
#define CPCAP_REG_CRM_ICHRG1 BIT(1) |
| 56 |
#define CPCAP_REG_CRM_ICHRG0 BIT(0) |
| 57 |
|
| 58 |
/* CPCAP_REG_CRM trickle charge voltages */ |
| 59 |
#define CPCAP_REG_CRM_TR(val) (((val) & 0x3) << 10) |
| 60 |
#define CPCAP_REG_CRM_TR_0A00 CPCAP_REG_CRM_TR(0x0) |
| 61 |
#define CPCAP_REG_CRM_TR_0A24 CPCAP_REG_CRM_TR(0x1) |
| 62 |
#define CPCAP_REG_CRM_TR_0A48 CPCAP_REG_CRM_TR(0x2) |
| 63 |
#define CPCAP_REG_CRM_TR_0A72 CPCAP_REG_CRM_TR(0x4) |
| 64 |
|
| 65 |
/* |
| 66 |
* CPCAP_REG_CRM charge voltages based on the ADC channel 1 values. |
| 67 |
* Note that these register bits don't match MC13783UG.pdf VCHRG |
| 68 |
* register bits. |
| 69 |
*/ |
| 70 |
#define CPCAP_REG_CRM_VCHRG(val) (((val) & 0xf) << 4) |
| 71 |
#define CPCAP_REG_CRM_VCHRG_3V80 CPCAP_REG_CRM_VCHRG(0x0) |
| 72 |
#define CPCAP_REG_CRM_VCHRG_4V10 CPCAP_REG_CRM_VCHRG(0x1) |
| 73 |
#define CPCAP_REG_CRM_VCHRG_4V12 CPCAP_REG_CRM_VCHRG(0x2) |
| 74 |
#define CPCAP_REG_CRM_VCHRG_4V15 CPCAP_REG_CRM_VCHRG(0x3) |
| 75 |
#define CPCAP_REG_CRM_VCHRG_4V17 CPCAP_REG_CRM_VCHRG(0x4) |
| 76 |
#define CPCAP_REG_CRM_VCHRG_4V20 CPCAP_REG_CRM_VCHRG(0x5) |
| 77 |
#define CPCAP_REG_CRM_VCHRG_4V23 CPCAP_REG_CRM_VCHRG(0x6) |
| 78 |
#define CPCAP_REG_CRM_VCHRG_4V25 CPCAP_REG_CRM_VCHRG(0x7) |
| 79 |
#define CPCAP_REG_CRM_VCHRG_4V27 CPCAP_REG_CRM_VCHRG(0x8) |
| 80 |
#define CPCAP_REG_CRM_VCHRG_4V30 CPCAP_REG_CRM_VCHRG(0x9) |
| 81 |
#define CPCAP_REG_CRM_VCHRG_4V33 CPCAP_REG_CRM_VCHRG(0xa) |
| 82 |
#define CPCAP_REG_CRM_VCHRG_4V35 CPCAP_REG_CRM_VCHRG(0xb) |
| 83 |
#define CPCAP_REG_CRM_VCHRG_4V38 CPCAP_REG_CRM_VCHRG(0xc) |
| 84 |
#define CPCAP_REG_CRM_VCHRG_4V40 CPCAP_REG_CRM_VCHRG(0xd) |
| 85 |
#define CPCAP_REG_CRM_VCHRG_4V42 CPCAP_REG_CRM_VCHRG(0xe) |
| 86 |
#define CPCAP_REG_CRM_VCHRG_4V44 CPCAP_REG_CRM_VCHRG(0xf) |
| 87 |
|
| 88 |
/* |
| 89 |
* CPCAP_REG_CRM charge currents. These seem to match MC13783UG.pdf |
| 90 |
* values in "Table 8-3. Charge Path Regulator Current Limit |
| 91 |
* Characteristics" for the nominal values. |
| 92 |
* |
| 93 |
* Except 70mA and 1.596A and unlimited, these are simply 88.7mA / step. |
| 94 |
*/ |
| 95 |
#define CPCAP_REG_CRM_ICHRG(val) (((val) & 0xf) << 0) |
| 96 |
#define CPCAP_REG_CRM_ICHRG_0A000 CPCAP_REG_CRM_ICHRG(0x0) |
| 97 |
#define CPCAP_REG_CRM_ICHRG_0A070 CPCAP_REG_CRM_ICHRG(0x1) |
| 98 |
#define CPCAP_REG_CRM_ICHRG_0A177 CPCAP_REG_CRM_ICHRG(0x2) |
| 99 |
#define CPCAP_REG_CRM_ICHRG_0A266 CPCAP_REG_CRM_ICHRG(0x3) |
| 100 |
#define CPCAP_REG_CRM_ICHRG_0A355 CPCAP_REG_CRM_ICHRG(0x4) |
| 101 |
#define CPCAP_REG_CRM_ICHRG_0A443 CPCAP_REG_CRM_ICHRG(0x5) |
| 102 |
#define CPCAP_REG_CRM_ICHRG_0A532 CPCAP_REG_CRM_ICHRG(0x6) |
| 103 |
#define CPCAP_REG_CRM_ICHRG_0A621 CPCAP_REG_CRM_ICHRG(0x7) |
| 104 |
#define CPCAP_REG_CRM_ICHRG_0A709 CPCAP_REG_CRM_ICHRG(0x8) |
| 105 |
#define CPCAP_REG_CRM_ICHRG_0A798 CPCAP_REG_CRM_ICHRG(0x9) |
| 106 |
#define CPCAP_REG_CRM_ICHRG_0A886 CPCAP_REG_CRM_ICHRG(0xa) |
| 107 |
#define CPCAP_REG_CRM_ICHRG_0A975 CPCAP_REG_CRM_ICHRG(0xb) |
| 108 |
#define CPCAP_REG_CRM_ICHRG_1A064 CPCAP_REG_CRM_ICHRG(0xc) |
| 109 |
#define CPCAP_REG_CRM_ICHRG_1A152 CPCAP_REG_CRM_ICHRG(0xd) |
| 110 |
#define CPCAP_REG_CRM_ICHRG_1A596 CPCAP_REG_CRM_ICHRG(0xe) |
| 111 |
#define CPCAP_REG_CRM_ICHRG_NO_LIMIT CPCAP_REG_CRM_ICHRG(0xf) |
| 112 |
|
| 113 |
/* CPCAP_REG_VUSBC register bits needed for VBUS */ |
| 114 |
#define CPCAP_BIT_VBUS_SWITCH BIT(0) /* VBUS boost to 5V */ |
| 115 |
|
| 116 |
enum { |
| 117 |
CPCAP_CHARGER_IIO_BATTDET, |
| 118 |
CPCAP_CHARGER_IIO_VOLTAGE, |
| 119 |
CPCAP_CHARGER_IIO_VBUS, |
| 120 |
CPCAP_CHARGER_IIO_CHRG_CURRENT, |
| 121 |
CPCAP_CHARGER_IIO_BATT_CURRENT, |
| 122 |
CPCAP_CHARGER_IIO_NR, |
| 123 |
}; |
| 124 |
|
| 125 |
struct cpcap_charger_ddata { |
| 126 |
struct device *dev; |
| 127 |
struct regmap *reg; |
| 128 |
struct list_head irq_list; |
| 129 |
struct delayed_work detect_work; |
| 130 |
struct delayed_work vbus_work; |
| 131 |
struct gpio_desc *gpio[2]; /* gpio_reven0 & 1 */ |
| 132 |
|
| 133 |
struct iio_channel *channels[CPCAP_CHARGER_IIO_NR]; |
| 134 |
|
| 135 |
struct power_supply *usb; |
| 136 |
|
| 137 |
struct phy_companion comparator; /* For USB VBUS */ |
| 138 |
unsigned int vbus_enabled:1; |
| 139 |
unsigned int feeding_vbus:1; |
| 140 |
atomic_t active; |
| 141 |
|
| 142 |
int status; |
| 143 |
int voltage; |
| 144 |
int limit_current; |
| 145 |
}; |
| 146 |
|
| 147 |
struct cpcap_interrupt_desc { |
| 148 |
int irq; |
| 149 |
struct list_head node; |
| 150 |
const char *name; |
| 151 |
}; |
| 152 |
|
| 153 |
struct cpcap_charger_ints_state { |
| 154 |
bool chrg_det; |
| 155 |
bool rvrs_chrg; |
| 156 |
bool vbusov; |
| 157 |
|
| 158 |
bool chrg_se1b; |
| 159 |
bool rvrs_mode; |
| 160 |
bool chrgcurr2; |
| 161 |
bool chrgcurr1; |
| 162 |
bool vbusvld; |
| 163 |
|
| 164 |
bool battdetb; |
| 165 |
}; |
| 166 |
|
| 167 |
static enum power_supply_property cpcap_charger_props[] = { |
| 168 |
POWER_SUPPLY_PROP_STATUS, |
| 169 |
POWER_SUPPLY_PROP_ONLINE, |
| 170 |
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, |
| 171 |
POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, |
| 172 |
POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| 173 |
POWER_SUPPLY_PROP_CURRENT_NOW, |
| 174 |
}; |
| 175 |
|
| 176 |
static int cpcap_charger_get_charge_voltage(struct cpcap_charger_ddata *ddata) |
| 177 |
{ |
| 178 |
struct iio_channel *channel; |
| 179 |
int error, value = 0; |
| 180 |
|
| 181 |
channel = ddata->channels[CPCAP_CHARGER_IIO_VOLTAGE]; |
| 182 |
error = iio_read_channel_processed(channel, &value); |
| 183 |
if (error < 0) { |
| 184 |
dev_warn(ddata->dev, "%s failed: %i\n", __func__, error); |
| 185 |
|
| 186 |
return 0; |
| 187 |
} |
| 188 |
|
| 189 |
return value; |
| 190 |
} |
| 191 |
|
| 192 |
static int cpcap_charger_get_charge_current(struct cpcap_charger_ddata *ddata) |
| 193 |
{ |
| 194 |
struct iio_channel *channel; |
| 195 |
int error, value = 0; |
| 196 |
|
| 197 |
channel = ddata->channels[CPCAP_CHARGER_IIO_CHRG_CURRENT]; |
| 198 |
error = iio_read_channel_processed(channel, &value); |
| 199 |
if (error < 0) { |
| 200 |
dev_warn(ddata->dev, "%s failed: %i\n", __func__, error); |
| 201 |
|
| 202 |
return 0; |
| 203 |
} |
| 204 |
|
| 205 |
return value; |
| 206 |
} |
| 207 |
|
| 208 |
static int cpcap_charger_get_property(struct power_supply *psy, |
| 209 |
enum power_supply_property psp, |
| 210 |
union power_supply_propval *val) |
| 211 |
{ |
| 212 |
struct cpcap_charger_ddata *ddata = dev_get_drvdata(psy->dev.parent); |
| 213 |
|
| 214 |
switch (psp) { |
| 215 |
case POWER_SUPPLY_PROP_STATUS: |
| 216 |
val->intval = ddata->status; |
| 217 |
break; |
| 218 |
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| 219 |
val->intval = ddata->limit_current; |
| 220 |
break; |
| 221 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: |
| 222 |
val->intval = ddata->voltage; |
| 223 |
break; |
| 224 |
case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| 225 |
if (ddata->status == POWER_SUPPLY_STATUS_CHARGING) |
| 226 |
val->intval = cpcap_charger_get_charge_voltage(ddata) * |
| 227 |
1000; |
| 228 |
else |
| 229 |
val->intval = 0; |
| 230 |
break; |
| 231 |
case POWER_SUPPLY_PROP_CURRENT_NOW: |
| 232 |
if (ddata->status == POWER_SUPPLY_STATUS_CHARGING) |
| 233 |
val->intval = cpcap_charger_get_charge_current(ddata) * |
| 234 |
1000; |
| 235 |
else |
| 236 |
val->intval = 0; |
| 237 |
break; |
| 238 |
case POWER_SUPPLY_PROP_ONLINE: |
| 239 |
val->intval = ddata->status == POWER_SUPPLY_STATUS_CHARGING; |
| 240 |
break; |
| 241 |
default: |
| 242 |
return -EINVAL; |
| 243 |
} |
| 244 |
|
| 245 |
return 0; |
| 246 |
} |
| 247 |
|
| 248 |
static int cpcap_charger_match_voltage(int voltage) |
| 249 |
{ |
| 250 |
switch (voltage) { |
| 251 |
case 0 ... 4100000 - 1: return 3800000; |
| 252 |
case 4100000 ... 4120000 - 1: return 4100000; |
| 253 |
case 4120000 ... 4150000 - 1: return 4120000; |
| 254 |
case 4150000 ... 4170000 - 1: return 4150000; |
| 255 |
case 4170000 ... 4200000 - 1: return 4170000; |
| 256 |
case 4200000 ... 4230000 - 1: return 4200000; |
| 257 |
case 4230000 ... 4250000 - 1: return 4230000; |
| 258 |
case 4250000 ... 4270000 - 1: return 4250000; |
| 259 |
case 4270000 ... 4300000 - 1: return 4270000; |
| 260 |
case 4300000 ... 4330000 - 1: return 4300000; |
| 261 |
case 4330000 ... 4350000 - 1: return 4330000; |
| 262 |
case 4350000 ... 4380000 - 1: return 4350000; |
| 263 |
case 4380000 ... 4400000 - 1: return 4380000; |
| 264 |
case 4400000 ... 4420000 - 1: return 4400000; |
| 265 |
case 4420000 ... 4440000 - 1: return 4420000; |
| 266 |
case 4440000: return 4440000; |
| 267 |
default: return 0; |
| 268 |
} |
| 269 |
} |
| 270 |
|
| 271 |
static int |
| 272 |
cpcap_charger_get_bat_const_charge_voltage(struct cpcap_charger_ddata *ddata) |
| 273 |
{ |
| 274 |
union power_supply_propval prop; |
| 275 |
struct power_supply *battery; |
| 276 |
int voltage = ddata->voltage; |
| 277 |
int error; |
| 278 |
|
| 279 |
battery = power_supply_get_by_name("battery"); |
| 280 |
if (battery) { |
| 281 |
error = power_supply_get_property(battery, |
| 282 |
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, |
| 283 |
&prop); |
| 284 |
if (!error) |
| 285 |
voltage = prop.intval; |
| 286 |
|
| 287 |
power_supply_put(battery); |
| 288 |
} |
| 289 |
|
| 290 |
return voltage; |
| 291 |
} |
| 292 |
|
| 293 |
static int cpcap_charger_current_to_regval(int microamp) |
| 294 |
{ |
| 295 |
int miliamp = microamp / 1000; |
| 296 |
int res; |
| 297 |
|
| 298 |
if (miliamp < 0) |
| 299 |
return -EINVAL; |
| 300 |
if (miliamp < 70) |
| 301 |
return CPCAP_REG_CRM_ICHRG(0x0); |
| 302 |
if (miliamp < 177) |
| 303 |
return CPCAP_REG_CRM_ICHRG(0x1); |
| 304 |
if (miliamp >= 1596) |
| 305 |
return CPCAP_REG_CRM_ICHRG(0xe); |
| 306 |
|
| 307 |
res = microamp / 88666; |
| 308 |
if (res > 0xd) |
| 309 |
res = 0xd; |
| 310 |
return CPCAP_REG_CRM_ICHRG(res); |
| 311 |
} |
| 312 |
|
| 313 |
static int cpcap_charger_set_property(struct power_supply *psy, |
| 314 |
enum power_supply_property psp, |
| 315 |
const union power_supply_propval *val) |
| 316 |
{ |
| 317 |
struct cpcap_charger_ddata *ddata = dev_get_drvdata(psy->dev.parent); |
| 318 |
int voltage, batvolt; |
| 319 |
|
| 320 |
switch (psp) { |
| 321 |
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| 322 |
if (cpcap_charger_current_to_regval(val->intval) < 0) |
| 323 |
return -EINVAL; |
| 324 |
ddata->limit_current = val->intval; |
| 325 |
schedule_delayed_work(&ddata->detect_work, 0); |
| 326 |
break; |
| 327 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: |
| 328 |
voltage = cpcap_charger_match_voltage(val->intval); |
| 329 |
batvolt = cpcap_charger_get_bat_const_charge_voltage(ddata); |
| 330 |
if (voltage > batvolt) |
| 331 |
voltage = batvolt; |
| 332 |
ddata->voltage = voltage; |
| 333 |
schedule_delayed_work(&ddata->detect_work, 0); |
| 334 |
break; |
| 335 |
default: |
| 336 |
return -EINVAL; |
| 337 |
} |
| 338 |
|
| 339 |
return 0; |
| 340 |
} |
| 341 |
|
| 342 |
static int cpcap_charger_property_is_writeable(struct power_supply *psy, |
| 343 |
enum power_supply_property psp) |
| 344 |
{ |
| 345 |
switch (psp) { |
| 346 |
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| 347 |
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: |
| 348 |
return 1; |
| 349 |
default: |
| 350 |
return 0; |
| 351 |
} |
| 352 |
} |
| 353 |
|
| 354 |
static void cpcap_charger_set_cable_path(struct cpcap_charger_ddata *ddata, |
| 355 |
bool enabled) |
| 356 |
{ |
| 357 |
if (!ddata->gpio[0]) |
| 358 |
return; |
| 359 |
|
| 360 |
gpiod_set_value(ddata->gpio[0], enabled); |
| 361 |
} |
| 362 |
|
| 363 |
static void cpcap_charger_set_inductive_path(struct cpcap_charger_ddata *ddata, |
| 364 |
bool enabled) |
| 365 |
{ |
| 366 |
if (!ddata->gpio[1]) |
| 367 |
return; |
| 368 |
|
| 369 |
gpiod_set_value(ddata->gpio[1], enabled); |
| 370 |
} |
| 371 |
|
| 372 |
static void cpcap_charger_update_state(struct cpcap_charger_ddata *ddata, |
| 373 |
int state) |
| 374 |
{ |
| 375 |
const char *status; |
| 376 |
|
| 377 |
if (state > POWER_SUPPLY_STATUS_FULL) { |
| 378 |
dev_warn(ddata->dev, "unknown state: %i\n", state); |
| 379 |
|
| 380 |
return; |
| 381 |
} |
| 382 |
|
| 383 |
ddata->status = state; |
| 384 |
|
| 385 |
switch (state) { |
| 386 |
case POWER_SUPPLY_STATUS_DISCHARGING: |
| 387 |
status = "DISCONNECTED"; |
| 388 |
break; |
| 389 |
case POWER_SUPPLY_STATUS_NOT_CHARGING: |
| 390 |
status = "DETECTING"; |
| 391 |
break; |
| 392 |
case POWER_SUPPLY_STATUS_CHARGING: |
| 393 |
status = "CHARGING"; |
| 394 |
break; |
| 395 |
case POWER_SUPPLY_STATUS_FULL: |
| 396 |
status = "DONE"; |
| 397 |
break; |
| 398 |
default: |
| 399 |
return; |
| 400 |
} |
| 401 |
|
| 402 |
dev_dbg(ddata->dev, "state: %s\n", status); |
| 403 |
} |
| 404 |
|
| 405 |
static int cpcap_charger_disable(struct cpcap_charger_ddata *ddata) |
| 406 |
{ |
| 407 |
int error; |
| 408 |
|
| 409 |
error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM, 0x3fff, |
| 410 |
CPCAP_REG_CRM_FET_OVRD | |
| 411 |
CPCAP_REG_CRM_FET_CTRL); |
| 412 |
if (error) |
| 413 |
dev_err(ddata->dev, "%s failed with %i\n", __func__, error); |
| 414 |
|
| 415 |
return error; |
| 416 |
} |
| 417 |
|
| 418 |
static int cpcap_charger_enable(struct cpcap_charger_ddata *ddata, |
| 419 |
int max_voltage, int charge_current, |
| 420 |
int trickle_current) |
| 421 |
{ |
| 422 |
int error; |
| 423 |
|
| 424 |
if (!max_voltage || !charge_current) |
| 425 |
return -EINVAL; |
| 426 |
|
| 427 |
dev_dbg(ddata->dev, "enable: %i %i %i\n", |
| 428 |
max_voltage, charge_current, trickle_current); |
| 429 |
|
| 430 |
error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM, 0x3fff, |
| 431 |
CPCAP_REG_CRM_CHRG_LED_EN | |
| 432 |
trickle_current | |
| 433 |
CPCAP_REG_CRM_FET_OVRD | |
| 434 |
CPCAP_REG_CRM_FET_CTRL | |
| 435 |
max_voltage | |
| 436 |
charge_current); |
| 437 |
if (error) |
| 438 |
dev_err(ddata->dev, "%s failed with %i\n", __func__, error); |
| 439 |
|
| 440 |
return error; |
| 441 |
} |
| 442 |
|
| 443 |
static bool cpcap_charger_vbus_valid(struct cpcap_charger_ddata *ddata) |
| 444 |
{ |
| 445 |
int error, value = 0; |
| 446 |
struct iio_channel *channel = |
| 447 |
ddata->channels[CPCAP_CHARGER_IIO_VBUS]; |
| 448 |
|
| 449 |
error = iio_read_channel_processed(channel, &value); |
| 450 |
if (error >= 0) |
| 451 |
return value > 3900; |
| 452 |
|
| 453 |
dev_err(ddata->dev, "error reading VBUS: %i\n", error); |
| 454 |
|
| 455 |
return false; |
| 456 |
} |
| 457 |
|
| 458 |
/* VBUS control functions for the USB PHY companion */ |
| 459 |
static void cpcap_charger_vbus_work(struct work_struct *work) |
| 460 |
{ |
| 461 |
struct cpcap_charger_ddata *ddata; |
| 462 |
bool vbus = false; |
| 463 |
int error; |
| 464 |
|
| 465 |
ddata = container_of(work, struct cpcap_charger_ddata, |
| 466 |
vbus_work.work); |
| 467 |
|
| 468 |
if (ddata->vbus_enabled) { |
| 469 |
vbus = cpcap_charger_vbus_valid(ddata); |
| 470 |
if (vbus) { |
| 471 |
dev_dbg(ddata->dev, "VBUS already provided\n"); |
| 472 |
|
| 473 |
return; |
| 474 |
} |
| 475 |
|
| 476 |
ddata->feeding_vbus = true; |
| 477 |
cpcap_charger_set_cable_path(ddata, false); |
| 478 |
cpcap_charger_set_inductive_path(ddata, false); |
| 479 |
|
| 480 |
error = cpcap_charger_disable(ddata); |
| 481 |
if (error) |
| 482 |
goto out_err; |
| 483 |
|
| 484 |
cpcap_charger_update_state(ddata, |
| 485 |
POWER_SUPPLY_STATUS_DISCHARGING); |
| 486 |
|
| 487 |
error = regmap_update_bits(ddata->reg, CPCAP_REG_VUSBC, |
| 488 |
CPCAP_BIT_VBUS_SWITCH, |
| 489 |
CPCAP_BIT_VBUS_SWITCH); |
| 490 |
if (error) |
| 491 |
goto out_err; |
| 492 |
|
| 493 |
error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM, |
| 494 |
CPCAP_REG_CRM_RVRSMODE, |
| 495 |
CPCAP_REG_CRM_RVRSMODE); |
| 496 |
if (error) |
| 497 |
goto out_err; |
| 498 |
} else { |
| 499 |
error = regmap_update_bits(ddata->reg, CPCAP_REG_VUSBC, |
| 500 |
CPCAP_BIT_VBUS_SWITCH, 0); |
| 501 |
if (error) |
| 502 |
goto out_err; |
| 503 |
|
| 504 |
error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM, |
| 505 |
CPCAP_REG_CRM_RVRSMODE, 0); |
| 506 |
if (error) |
| 507 |
goto out_err; |
| 508 |
|
| 509 |
cpcap_charger_set_cable_path(ddata, true); |
| 510 |
cpcap_charger_set_inductive_path(ddata, true); |
| 511 |
ddata->feeding_vbus = false; |
| 512 |
} |
| 513 |
|
| 514 |
return; |
| 515 |
|
| 516 |
out_err: |
| 517 |
cpcap_charger_update_state(ddata, POWER_SUPPLY_STATUS_UNKNOWN); |
| 518 |
dev_err(ddata->dev, "%s could not %s vbus: %i\n", __func__, |
| 519 |
str_enable_disable(ddata->vbus_enabled), error); |
| 520 |
} |
| 521 |
|
| 522 |
static int cpcap_charger_set_vbus(struct phy_companion *comparator, |
| 523 |
bool enabled) |
| 524 |
{ |
| 525 |
struct cpcap_charger_ddata *ddata = |
| 526 |
container_of(comparator, struct cpcap_charger_ddata, |
| 527 |
comparator); |
| 528 |
|
| 529 |
ddata->vbus_enabled = enabled; |
| 530 |
schedule_delayed_work(&ddata->vbus_work, 0); |
| 531 |
|
| 532 |
return 0; |
| 533 |
} |
| 534 |
|
| 535 |
/* Charger interrupt handling functions */ |
| 536 |
|
| 537 |
static int cpcap_charger_get_ints_state(struct cpcap_charger_ddata *ddata, |
| 538 |
struct cpcap_charger_ints_state *s) |
| 539 |
{ |
| 540 |
int val, error; |
| 541 |
|
| 542 |
error = regmap_read(ddata->reg, CPCAP_REG_INTS1, &val); |
| 543 |
if (error) |
| 544 |
return error; |
| 545 |
|
| 546 |
s->chrg_det = val & BIT(13); |
| 547 |
s->rvrs_chrg = val & BIT(12); |
| 548 |
s->vbusov = val & BIT(11); |
| 549 |
|
| 550 |
error = regmap_read(ddata->reg, CPCAP_REG_INTS2, &val); |
| 551 |
if (error) |
| 552 |
return error; |
| 553 |
|
| 554 |
s->chrg_se1b = val & BIT(13); |
| 555 |
s->rvrs_mode = val & BIT(6); |
| 556 |
s->chrgcurr2 = val & BIT(5); |
| 557 |
s->chrgcurr1 = val & BIT(4); |
| 558 |
s->vbusvld = val & BIT(3); |
| 559 |
|
| 560 |
error = regmap_read(ddata->reg, CPCAP_REG_INTS4, &val); |
| 561 |
if (error) |
| 562 |
return error; |
| 563 |
|
| 564 |
s->battdetb = val & BIT(6); |
| 565 |
|
| 566 |
return 0; |
| 567 |
} |
| 568 |
|
| 569 |
static int cpcap_charger_voltage_to_regval(int voltage) |
| 570 |
{ |
| 571 |
int offset; |
| 572 |
|
| 573 |
switch (voltage) { |
| 574 |
case 0 ... 4100000 - 1: |
| 575 |
return 0; |
| 576 |
case 4100000 ... 4200000 - 1: |
| 577 |
offset = 1; |
| 578 |
break; |
| 579 |
case 4200000 ... 4300000 - 1: |
| 580 |
offset = 0; |
| 581 |
break; |
| 582 |
case 4300000 ... 4380000 - 1: |
| 583 |
offset = -1; |
| 584 |
break; |
| 585 |
case 4380000 ... 4440000: |
| 586 |
offset = -2; |
| 587 |
break; |
| 588 |
default: |
| 589 |
return 0; |
| 590 |
} |
| 591 |
|
| 592 |
return ((voltage - 4100000) / 20000) + offset; |
| 593 |
} |
| 594 |
|
| 595 |
static void cpcap_charger_disconnect(struct cpcap_charger_ddata *ddata, |
| 596 |
int state, unsigned long delay) |
| 597 |
{ |
| 598 |
int error; |
| 599 |
|
| 600 |
/* Update battery state before disconnecting the charger */ |
| 601 |
switch (state) { |
| 602 |
case POWER_SUPPLY_STATUS_DISCHARGING: |
| 603 |
case POWER_SUPPLY_STATUS_FULL: |
| 604 |
power_supply_changed(ddata->usb); |
| 605 |
break; |
| 606 |
default: |
| 607 |
break; |
| 608 |
} |
| 609 |
|
| 610 |
error = cpcap_charger_disable(ddata); |
| 611 |
if (error) { |
| 612 |
cpcap_charger_update_state(ddata, POWER_SUPPLY_STATUS_UNKNOWN); |
| 613 |
return; |
| 614 |
} |
| 615 |
|
| 616 |
cpcap_charger_update_state(ddata, state); |
| 617 |
power_supply_changed(ddata->usb); |
| 618 |
schedule_delayed_work(&ddata->detect_work, delay); |
| 619 |
} |
| 620 |
|
| 621 |
static void cpcap_usb_detect(struct work_struct *work) |
| 622 |
{ |
| 623 |
struct cpcap_charger_ddata *ddata; |
| 624 |
struct cpcap_charger_ints_state s; |
| 625 |
int error, new_state; |
| 626 |
|
| 627 |
ddata = container_of(work, struct cpcap_charger_ddata, |
| 628 |
detect_work.work); |
| 629 |
|
| 630 |
error = cpcap_charger_get_ints_state(ddata, &s); |
| 631 |
if (error) |
| 632 |
return; |
| 633 |
|
| 634 |
/* Just init the state if a charger is connected with no chrg_det set */ |
| 635 |
if (!s.chrg_det && s.chrgcurr1 && s.vbusvld) { |
| 636 |
cpcap_charger_update_state(ddata, |
| 637 |
POWER_SUPPLY_STATUS_NOT_CHARGING); |
| 638 |
|
| 639 |
return; |
| 640 |
} |
| 641 |
|
| 642 |
/* |
| 643 |
* If battery voltage is higher than charge voltage, it may have been |
| 644 |
* charged to 4.35V by Android. Try again in 10 minutes. |
| 645 |
*/ |
| 646 |
if (cpcap_charger_get_charge_voltage(ddata) > ddata->voltage) { |
| 647 |
cpcap_charger_disconnect(ddata, |
| 648 |
POWER_SUPPLY_STATUS_NOT_CHARGING, |
| 649 |
HZ * 60 * 10); |
| 650 |
|
| 651 |
return; |
| 652 |
} |
| 653 |
|
| 654 |
/* Delay for 80ms to avoid vbus bouncing when usb cable is plugged in */ |
| 655 |
usleep_range(80000, 120000); |
| 656 |
|
| 657 |
/* Throttle chrgcurr2 interrupt for charger done and retry */ |
| 658 |
switch (ddata->status) { |
| 659 |
case POWER_SUPPLY_STATUS_CHARGING: |
| 660 |
if (s.chrgcurr2) |
| 661 |
break; |
| 662 |
new_state = POWER_SUPPLY_STATUS_FULL; |
| 663 |
|
| 664 |
if (s.chrgcurr1 && s.vbusvld) { |
| 665 |
cpcap_charger_disconnect(ddata, new_state, HZ * 5); |
| 666 |
return; |
| 667 |
} |
| 668 |
break; |
| 669 |
case POWER_SUPPLY_STATUS_FULL: |
| 670 |
if (!s.chrgcurr2) |
| 671 |
break; |
| 672 |
if (s.vbusvld) |
| 673 |
new_state = POWER_SUPPLY_STATUS_NOT_CHARGING; |
| 674 |
else |
| 675 |
new_state = POWER_SUPPLY_STATUS_DISCHARGING; |
| 676 |
|
| 677 |
cpcap_charger_disconnect(ddata, new_state, HZ * 5); |
| 678 |
|
| 679 |
return; |
| 680 |
default: |
| 681 |
break; |
| 682 |
} |
| 683 |
|
| 684 |
if (!ddata->feeding_vbus && cpcap_charger_vbus_valid(ddata) && |
| 685 |
s.chrgcurr1) { |
| 686 |
int max_current; |
| 687 |
int vchrg, ichrg; |
| 688 |
union power_supply_propval val; |
| 689 |
struct power_supply *battery; |
| 690 |
|
| 691 |
battery = power_supply_get_by_name("battery"); |
| 692 |
if (!battery) { |
| 693 |
dev_err(ddata->dev, "battery power_supply not available\n"); |
| 694 |
return; |
| 695 |
} |
| 696 |
|
| 697 |
error = power_supply_get_property(battery, POWER_SUPPLY_PROP_PRESENT, &val); |
| 698 |
power_supply_put(battery); |
| 699 |
if (error) |
| 700 |
goto out_err; |
| 701 |
|
| 702 |
if (val.intval) { |
| 703 |
max_current = 1596000; |
| 704 |
} else { |
| 705 |
dev_info(ddata->dev, "battery not inserted, charging disabled\n"); |
| 706 |
max_current = 0; |
| 707 |
} |
| 708 |
|
| 709 |
if (max_current > ddata->limit_current) |
| 710 |
max_current = ddata->limit_current; |
| 711 |
|
| 712 |
ichrg = cpcap_charger_current_to_regval(max_current); |
| 713 |
vchrg = cpcap_charger_voltage_to_regval(ddata->voltage); |
| 714 |
error = cpcap_charger_enable(ddata, |
| 715 |
CPCAP_REG_CRM_VCHRG(vchrg), |
| 716 |
ichrg, 0); |
| 717 |
if (error) |
| 718 |
goto out_err; |
| 719 |
cpcap_charger_update_state(ddata, |
| 720 |
POWER_SUPPLY_STATUS_CHARGING); |
| 721 |
} else { |
| 722 |
error = cpcap_charger_disable(ddata); |
| 723 |
if (error) |
| 724 |
goto out_err; |
| 725 |
cpcap_charger_update_state(ddata, |
| 726 |
POWER_SUPPLY_STATUS_DISCHARGING); |
| 727 |
} |
| 728 |
|
| 729 |
power_supply_changed(ddata->usb); |
| 730 |
return; |
| 731 |
|
| 732 |
out_err: |
| 733 |
cpcap_charger_update_state(ddata, POWER_SUPPLY_STATUS_UNKNOWN); |
| 734 |
dev_err(ddata->dev, "%s failed with %i\n", __func__, error); |
| 735 |
} |
| 736 |
|
| 737 |
static irqreturn_t cpcap_charger_irq_thread(int irq, void *data) |
| 738 |
{ |
| 739 |
struct cpcap_charger_ddata *ddata = data; |
| 740 |
|
| 741 |
if (!atomic_read(&ddata->active)) |
| 742 |
return IRQ_NONE; |
| 743 |
|
| 744 |
schedule_delayed_work(&ddata->detect_work, 0); |
| 745 |
|
| 746 |
return IRQ_HANDLED; |
| 747 |
} |
| 748 |
|
| 749 |
static int cpcap_usb_init_irq(struct platform_device *pdev, |
| 750 |
struct cpcap_charger_ddata *ddata, |
| 751 |
const char *name) |
| 752 |
{ |
| 753 |
struct cpcap_interrupt_desc *d; |
| 754 |
int irq, error; |
| 755 |
|
| 756 |
irq = platform_get_irq_byname(pdev, name); |
| 757 |
if (irq < 0) |
| 758 |
return -ENODEV; |
| 759 |
|
| 760 |
error = devm_request_threaded_irq(ddata->dev, irq, NULL, |
| 761 |
cpcap_charger_irq_thread, |
| 762 |
IRQF_SHARED | IRQF_ONESHOT, |
| 763 |
name, ddata); |
| 764 |
if (error) { |
| 765 |
dev_err(ddata->dev, "could not get irq %s: %i\n", |
| 766 |
name, error); |
| 767 |
|
| 768 |
return error; |
| 769 |
} |
| 770 |
|
| 771 |
d = devm_kzalloc(ddata->dev, sizeof(*d), GFP_KERNEL); |
| 772 |
if (!d) |
| 773 |
return -ENOMEM; |
| 774 |
|
| 775 |
d->name = name; |
| 776 |
d->irq = irq; |
| 777 |
list_add(&d->node, &ddata->irq_list); |
| 778 |
|
| 779 |
return 0; |
| 780 |
} |
| 781 |
|
| 782 |
static const char * const cpcap_charger_irqs[] = { |
| 783 |
/* REG_INT_0 */ |
| 784 |
"chrg_det", "rvrs_chrg", |
| 785 |
|
| 786 |
/* REG_INT1 */ |
| 787 |
"chrg_se1b", "se0conn", "rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld", |
| 788 |
|
| 789 |
/* REG_INT_3 */ |
| 790 |
"battdetb", |
| 791 |
}; |
| 792 |
|
| 793 |
static int cpcap_usb_init_interrupts(struct platform_device *pdev, |
| 794 |
struct cpcap_charger_ddata *ddata) |
| 795 |
{ |
| 796 |
int i, error; |
| 797 |
|
| 798 |
for (i = 0; i < ARRAY_SIZE(cpcap_charger_irqs); i++) { |
| 799 |
error = cpcap_usb_init_irq(pdev, ddata, cpcap_charger_irqs[i]); |
| 800 |
if (error) |
| 801 |
return error; |
| 802 |
} |
| 803 |
|
| 804 |
return 0; |
| 805 |
} |
| 806 |
|
| 807 |
static void cpcap_charger_init_optional_gpios(struct cpcap_charger_ddata *ddata) |
| 808 |
{ |
| 809 |
int i; |
| 810 |
|
| 811 |
for (i = 0; i < 2; i++) { |
| 812 |
ddata->gpio[i] = devm_gpiod_get_index(ddata->dev, "mode", |
| 813 |
i, GPIOD_OUT_HIGH); |
| 814 |
if (IS_ERR(ddata->gpio[i])) { |
| 815 |
dev_info(ddata->dev, "no mode change GPIO%i: %li\n", |
| 816 |
i, PTR_ERR(ddata->gpio[i])); |
| 817 |
ddata->gpio[i] = NULL; |
| 818 |
} |
| 819 |
} |
| 820 |
} |
| 821 |
|
| 822 |
static int cpcap_charger_init_iio(struct cpcap_charger_ddata *ddata) |
| 823 |
{ |
| 824 |
const char * const names[CPCAP_CHARGER_IIO_NR] = { |
| 825 |
"battdetb", "battp", "vbus", "chg_isense", "batti", |
| 826 |
}; |
| 827 |
int error, i; |
| 828 |
|
| 829 |
for (i = 0; i < CPCAP_CHARGER_IIO_NR; i++) { |
| 830 |
ddata->channels[i] = devm_iio_channel_get(ddata->dev, |
| 831 |
names[i]); |
| 832 |
if (IS_ERR(ddata->channels[i])) { |
| 833 |
error = PTR_ERR(ddata->channels[i]); |
| 834 |
goto out_err; |
| 835 |
} |
| 836 |
|
| 837 |
if (!ddata->channels[i]->indio_dev) { |
| 838 |
error = -ENXIO; |
| 839 |
goto out_err; |
| 840 |
} |
| 841 |
} |
| 842 |
|
| 843 |
return 0; |
| 844 |
|
| 845 |
out_err: |
| 846 |
if (error != -EPROBE_DEFER) |
| 847 |
dev_err(ddata->dev, "could not initialize VBUS or ID IIO: %i\n", |
| 848 |
error); |
| 849 |
|
| 850 |
return error; |
| 851 |
} |
| 852 |
|
| 853 |
static char *cpcap_charger_supplied_to[] = { |
| 854 |
"battery", |
| 855 |
}; |
| 856 |
|
| 857 |
static const struct power_supply_desc cpcap_charger_usb_desc = { |
| 858 |
.name = "usb", |
| 859 |
.type = POWER_SUPPLY_TYPE_USB, |
| 860 |
.properties = cpcap_charger_props, |
| 861 |
.num_properties = ARRAY_SIZE(cpcap_charger_props), |
| 862 |
.get_property = cpcap_charger_get_property, |
| 863 |
.set_property = cpcap_charger_set_property, |
| 864 |
.property_is_writeable = cpcap_charger_property_is_writeable, |
| 865 |
}; |
| 866 |
|
| 867 |
static const struct of_device_id cpcap_charger_id_table[] = { |
| 868 |
{ |
| 869 |
.compatible = "motorola,mapphone-cpcap-charger", |
| 870 |
}, |
| 871 |
{}, |
| 872 |
}; |
| 873 |
MODULE_DEVICE_TABLE(of, cpcap_charger_id_table); |
| 874 |
|
| 875 |
static int cpcap_charger_probe(struct platform_device *pdev) |
| 876 |
{ |
| 877 |
struct cpcap_charger_ddata *ddata; |
| 878 |
struct power_supply_config psy_cfg = {}; |
| 879 |
int error; |
| 880 |
|
| 881 |
ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL); |
| 882 |
if (!ddata) |
| 883 |
return -ENOMEM; |
| 884 |
|
| 885 |
ddata->dev = &pdev->dev; |
| 886 |
ddata->voltage = 4200000; |
| 887 |
ddata->limit_current = 532000; |
| 888 |
|
| 889 |
ddata->reg = dev_get_regmap(ddata->dev->parent, NULL); |
| 890 |
if (!ddata->reg) |
| 891 |
return -ENODEV; |
| 892 |
|
| 893 |
INIT_LIST_HEAD(&ddata->irq_list); |
| 894 |
INIT_DELAYED_WORK(&ddata->detect_work, cpcap_usb_detect); |
| 895 |
INIT_DELAYED_WORK(&ddata->vbus_work, cpcap_charger_vbus_work); |
| 896 |
platform_set_drvdata(pdev, ddata); |
| 897 |
|
| 898 |
error = cpcap_charger_init_iio(ddata); |
| 899 |
if (error) |
| 900 |
return error; |
| 901 |
|
| 902 |
atomic_set(&ddata->active, 1); |
| 903 |
|
| 904 |
psy_cfg.fwnode = dev_fwnode(&pdev->dev); |
| 905 |
psy_cfg.drv_data = ddata; |
| 906 |
psy_cfg.supplied_to = cpcap_charger_supplied_to; |
| 907 |
psy_cfg.num_supplicants = ARRAY_SIZE(cpcap_charger_supplied_to); |
| 908 |
|
| 909 |
ddata->usb = devm_power_supply_register(ddata->dev, |
| 910 |
&cpcap_charger_usb_desc, |
| 911 |
&psy_cfg); |
| 912 |
if (IS_ERR(ddata->usb)) { |
| 913 |
error = PTR_ERR(ddata->usb); |
| 914 |
dev_err(ddata->dev, "failed to register USB charger: %i\n", |
| 915 |
error); |
| 916 |
|
| 917 |
return error; |
| 918 |
} |
| 919 |
|
| 920 |
error = cpcap_usb_init_interrupts(pdev, ddata); |
| 921 |
if (error) |
| 922 |
return error; |
| 923 |
|
| 924 |
ddata->comparator.set_vbus = cpcap_charger_set_vbus; |
| 925 |
error = omap_usb2_set_comparator(&ddata->comparator); |
| 926 |
if (error == -ENODEV) { |
| 927 |
dev_info(ddata->dev, "charger needs phy, deferring probe\n"); |
| 928 |
return -EPROBE_DEFER; |
| 929 |
} |
| 930 |
|
| 931 |
cpcap_charger_init_optional_gpios(ddata); |
| 932 |
|
| 933 |
schedule_delayed_work(&ddata->detect_work, 0); |
| 934 |
|
| 935 |
return 0; |
| 936 |
} |
| 937 |
|
| 938 |
static void cpcap_charger_shutdown(struct platform_device *pdev) |
| 939 |
{ |
| 940 |
struct cpcap_charger_ddata *ddata = platform_get_drvdata(pdev); |
| 941 |
int error; |
| 942 |
|
| 943 |
atomic_set(&ddata->active, 0); |
| 944 |
error = omap_usb2_set_comparator(NULL); |
| 945 |
if (error) |
| 946 |
dev_warn(ddata->dev, "could not clear USB comparator: %i\n", |
| 947 |
error); |
| 948 |
|
| 949 |
error = cpcap_charger_disable(ddata); |
| 950 |
if (error) { |
| 951 |
cpcap_charger_update_state(ddata, POWER_SUPPLY_STATUS_UNKNOWN); |
| 952 |
dev_warn(ddata->dev, "could not clear charger: %i\n", |
| 953 |
error); |
| 954 |
} |
| 955 |
cpcap_charger_update_state(ddata, POWER_SUPPLY_STATUS_DISCHARGING); |
| 956 |
cancel_delayed_work_sync(&ddata->vbus_work); |
| 957 |
cancel_delayed_work_sync(&ddata->detect_work); |
| 958 |
} |
| 959 |
|
| 960 |
static void cpcap_charger_remove(struct platform_device *pdev) |
| 961 |
{ |
| 962 |
cpcap_charger_shutdown(pdev); |
| 963 |
} |
| 964 |
|
| 965 |
static struct platform_driver cpcap_charger_driver = { |
| 966 |
.probe = cpcap_charger_probe, |
| 967 |
.driver = { |
| 968 |
.name = "cpcap-charger", |
| 969 |
.of_match_table = cpcap_charger_id_table, |
| 970 |
}, |
| 971 |
.shutdown = cpcap_charger_shutdown, |
| 972 |
.remove = cpcap_charger_remove, |
| 973 |
}; |
| 974 |
module_platform_driver(cpcap_charger_driver); |
| 975 |
|
| 976 |
MODULE_AUTHOR("Tony Lindgren <[email protected]>"); |
| 977 |
MODULE_DESCRIPTION("CPCAP Battery Charger Interface driver"); |
| 978 |
MODULE_LICENSE("GPL v2"); |
| 979 |
MODULE_ALIAS("platform:cpcap-charger"); |