| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Battery driver for Marvell 88PM860x PMIC |
| 4 |
* |
| 5 |
* Copyright (c) 2012 Marvell International Ltd. |
| 6 |
* Author: Jett Zhou <[email protected]> |
| 7 |
* Haojian Zhuang <[email protected]> |
| 8 |
*/ |
| 9 |
|
| 10 |
#include <linux/kernel.h> |
| 11 |
#include <linux/module.h> |
| 12 |
#include <linux/platform_device.h> |
| 13 |
#include <linux/slab.h> |
| 14 |
#include <linux/power_supply.h> |
| 15 |
#include <linux/mfd/88pm860x.h> |
| 16 |
#include <linux/delay.h> |
| 17 |
#include <linux/uaccess.h> |
| 18 |
#include <asm/div64.h> |
| 19 |
|
| 20 |
/* bit definitions of Status Query Interface 2 */ |
| 21 |
#define STATUS2_CHG (1 << 2) |
| 22 |
|
| 23 |
/* bit definitions of Reset Out Register */ |
| 24 |
#define RESET_SW_PD (1 << 7) |
| 25 |
|
| 26 |
/* bit definitions of PreReg 1 */ |
| 27 |
#define PREREG1_90MA (0x0) |
| 28 |
#define PREREG1_180MA (0x1) |
| 29 |
#define PREREG1_450MA (0x4) |
| 30 |
#define PREREG1_540MA (0x5) |
| 31 |
#define PREREG1_1350MA (0xE) |
| 32 |
#define PREREG1_VSYS_4_5V (3 << 4) |
| 33 |
|
| 34 |
/* bit definitions of Charger Control 1 Register */ |
| 35 |
#define CC1_MODE_OFF (0) |
| 36 |
#define CC1_MODE_PRECHARGE (1) |
| 37 |
#define CC1_MODE_FASTCHARGE (2) |
| 38 |
#define CC1_MODE_PULSECHARGE (3) |
| 39 |
#define CC1_ITERM_20MA (0 << 2) |
| 40 |
#define CC1_ITERM_60MA (2 << 2) |
| 41 |
#define CC1_VFCHG_4_2V (9 << 4) |
| 42 |
|
| 43 |
/* bit definitions of Charger Control 2 Register */ |
| 44 |
#define CC2_ICHG_100MA (0x1) |
| 45 |
#define CC2_ICHG_500MA (0x9) |
| 46 |
#define CC2_ICHG_1000MA (0x13) |
| 47 |
|
| 48 |
/* bit definitions of Charger Control 3 Register */ |
| 49 |
#define CC3_180MIN_TIMEOUT (0x6 << 4) |
| 50 |
#define CC3_270MIN_TIMEOUT (0x7 << 4) |
| 51 |
#define CC3_360MIN_TIMEOUT (0xA << 4) |
| 52 |
#define CC3_DISABLE_TIMEOUT (0xF << 4) |
| 53 |
|
| 54 |
/* bit definitions of Charger Control 4 Register */ |
| 55 |
#define CC4_IPRE_40MA (7) |
| 56 |
#define CC4_VPCHG_3_2V (3 << 4) |
| 57 |
#define CC4_IFCHG_MON_EN (1 << 6) |
| 58 |
#define CC4_BTEMP_MON_EN (1 << 7) |
| 59 |
|
| 60 |
/* bit definitions of Charger Control 6 Register */ |
| 61 |
#define CC6_BAT_OV_EN (1 << 2) |
| 62 |
#define CC6_BAT_UV_EN (1 << 3) |
| 63 |
#define CC6_UV_VBAT_SET (0x3 << 6) /* 2.8v */ |
| 64 |
|
| 65 |
/* bit definitions of Charger Control 7 Register */ |
| 66 |
#define CC7_BAT_REM_EN (1 << 3) |
| 67 |
#define CC7_IFSM_EN (1 << 7) |
| 68 |
|
| 69 |
/* bit definitions of Measurement Enable 1 Register */ |
| 70 |
#define MEAS1_VBAT (1 << 0) |
| 71 |
|
| 72 |
/* bit definitions of Measurement Enable 3 Register */ |
| 73 |
#define MEAS3_IBAT_EN (1 << 0) |
| 74 |
#define MEAS3_CC_EN (1 << 2) |
| 75 |
|
| 76 |
#define FSM_INIT 0 |
| 77 |
#define FSM_DISCHARGE 1 |
| 78 |
#define FSM_PRECHARGE 2 |
| 79 |
#define FSM_FASTCHARGE 3 |
| 80 |
|
| 81 |
#define PRECHARGE_THRESHOLD 3100 |
| 82 |
#define POWEROFF_THRESHOLD 3400 |
| 83 |
#define CHARGE_THRESHOLD 4000 |
| 84 |
#define DISCHARGE_THRESHOLD 4180 |
| 85 |
|
| 86 |
/* over-temperature on PM8606 setting */ |
| 87 |
#define OVER_TEMP_FLAG (1 << 6) |
| 88 |
#define OVTEMP_AUTORECOVER (1 << 3) |
| 89 |
|
| 90 |
/* over-voltage protect on vchg setting mv */ |
| 91 |
#define VCHG_NORMAL_LOW 4200 |
| 92 |
#define VCHG_NORMAL_CHECK 5800 |
| 93 |
#define VCHG_NORMAL_HIGH 6000 |
| 94 |
#define VCHG_OVP_LOW 5500 |
| 95 |
|
| 96 |
struct pm860x_charger_info { |
| 97 |
struct pm860x_chip *chip; |
| 98 |
struct i2c_client *i2c; |
| 99 |
struct i2c_client *i2c_8606; |
| 100 |
struct device *dev; |
| 101 |
|
| 102 |
struct power_supply *usb; |
| 103 |
struct mutex lock; |
| 104 |
int irq_nums; |
| 105 |
int irq[7]; |
| 106 |
unsigned state:3; /* fsm state */ |
| 107 |
unsigned online:1; /* usb charger */ |
| 108 |
unsigned present:1; /* battery present */ |
| 109 |
unsigned allowed:1; |
| 110 |
}; |
| 111 |
|
| 112 |
static char *pm860x_supplied_to[] = { |
| 113 |
"battery-monitor", |
| 114 |
}; |
| 115 |
|
| 116 |
static int measure_vchg(struct pm860x_charger_info *info, int *data) |
| 117 |
{ |
| 118 |
unsigned char buf[2]; |
| 119 |
int ret = 0; |
| 120 |
|
| 121 |
ret = pm860x_bulk_read(info->i2c, PM8607_VCHG_MEAS1, 2, buf); |
| 122 |
if (ret < 0) |
| 123 |
return ret; |
| 124 |
|
| 125 |
*data = ((buf[0] & 0xff) << 4) | (buf[1] & 0x0f); |
| 126 |
/* V_BATT_MEAS(mV) = value * 5 * 1.8 * 1000 / (2^12) */ |
| 127 |
*data = ((*data & 0xfff) * 9 * 125) >> 9; |
| 128 |
|
| 129 |
dev_dbg(info->dev, "%s, vchg: %d mv\n", __func__, *data); |
| 130 |
|
| 131 |
return ret; |
| 132 |
} |
| 133 |
|
| 134 |
static void set_vchg_threshold(struct pm860x_charger_info *info, |
| 135 |
int min, int max) |
| 136 |
{ |
| 137 |
int data; |
| 138 |
|
| 139 |
/* (tmp << 8) * / 5 / 1800 */ |
| 140 |
if (min <= 0) |
| 141 |
data = 0; |
| 142 |
else |
| 143 |
data = (min << 5) / 1125; |
| 144 |
pm860x_reg_write(info->i2c, PM8607_VCHG_LOWTH, data); |
| 145 |
dev_dbg(info->dev, "VCHG_LOWTH:%dmv, 0x%x\n", min, data); |
| 146 |
|
| 147 |
if (max <= 0) |
| 148 |
data = 0xff; |
| 149 |
else |
| 150 |
data = (max << 5) / 1125; |
| 151 |
pm860x_reg_write(info->i2c, PM8607_VCHG_HIGHTH, data); |
| 152 |
dev_dbg(info->dev, "VCHG_HIGHTH:%dmv, 0x%x\n", max, data); |
| 153 |
|
| 154 |
} |
| 155 |
|
| 156 |
static void set_vbatt_threshold(struct pm860x_charger_info *info, |
| 157 |
int min, int max) |
| 158 |
{ |
| 159 |
int data; |
| 160 |
|
| 161 |
/* (tmp << 8) * 3 / 1800 */ |
| 162 |
if (min <= 0) |
| 163 |
data = 0; |
| 164 |
else |
| 165 |
data = (min << 5) / 675; |
| 166 |
pm860x_reg_write(info->i2c, PM8607_VBAT_LOWTH, data); |
| 167 |
dev_dbg(info->dev, "VBAT Min:%dmv, LOWTH:0x%x\n", min, data); |
| 168 |
|
| 169 |
if (max <= 0) |
| 170 |
data = 0xff; |
| 171 |
else |
| 172 |
data = (max << 5) / 675; |
| 173 |
pm860x_reg_write(info->i2c, PM8607_VBAT_HIGHTH, data); |
| 174 |
dev_dbg(info->dev, "VBAT Max:%dmv, HIGHTH:0x%x\n", max, data); |
| 175 |
|
| 176 |
return; |
| 177 |
} |
| 178 |
|
| 179 |
static int start_precharge(struct pm860x_charger_info *info) |
| 180 |
{ |
| 181 |
int ret; |
| 182 |
|
| 183 |
dev_dbg(info->dev, "Start Pre-charging!\n"); |
| 184 |
set_vbatt_threshold(info, 0, 0); |
| 185 |
|
| 186 |
ret = pm860x_reg_write(info->i2c_8606, PM8606_PREREGULATORA, |
| 187 |
PREREG1_1350MA | PREREG1_VSYS_4_5V); |
| 188 |
if (ret < 0) |
| 189 |
goto out; |
| 190 |
/* stop charging */ |
| 191 |
ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3, |
| 192 |
CC1_MODE_OFF); |
| 193 |
if (ret < 0) |
| 194 |
goto out; |
| 195 |
/* set 270 minutes timeout */ |
| 196 |
ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL3, (0xf << 4), |
| 197 |
CC3_270MIN_TIMEOUT); |
| 198 |
if (ret < 0) |
| 199 |
goto out; |
| 200 |
/* set precharge current, termination voltage, IBAT & TBAT monitor */ |
| 201 |
ret = pm860x_reg_write(info->i2c, PM8607_CHG_CTRL4, |
| 202 |
CC4_IPRE_40MA | CC4_VPCHG_3_2V | |
| 203 |
CC4_IFCHG_MON_EN | CC4_BTEMP_MON_EN); |
| 204 |
if (ret < 0) |
| 205 |
goto out; |
| 206 |
ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL7, |
| 207 |
CC7_BAT_REM_EN | CC7_IFSM_EN, |
| 208 |
CC7_BAT_REM_EN | CC7_IFSM_EN); |
| 209 |
if (ret < 0) |
| 210 |
goto out; |
| 211 |
/* trigger precharge */ |
| 212 |
ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3, |
| 213 |
CC1_MODE_PRECHARGE); |
| 214 |
out: |
| 215 |
return ret; |
| 216 |
} |
| 217 |
|
| 218 |
static int start_fastcharge(struct pm860x_charger_info *info) |
| 219 |
{ |
| 220 |
int ret; |
| 221 |
|
| 222 |
dev_dbg(info->dev, "Start Fast-charging!\n"); |
| 223 |
|
| 224 |
/* set fastcharge termination current & voltage, disable charging */ |
| 225 |
ret = pm860x_reg_write(info->i2c, PM8607_CHG_CTRL1, |
| 226 |
CC1_MODE_OFF | CC1_ITERM_60MA | |
| 227 |
CC1_VFCHG_4_2V); |
| 228 |
if (ret < 0) |
| 229 |
goto out; |
| 230 |
ret = pm860x_reg_write(info->i2c_8606, PM8606_PREREGULATORA, |
| 231 |
PREREG1_540MA | PREREG1_VSYS_4_5V); |
| 232 |
if (ret < 0) |
| 233 |
goto out; |
| 234 |
ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL2, 0x1f, |
| 235 |
CC2_ICHG_500MA); |
| 236 |
if (ret < 0) |
| 237 |
goto out; |
| 238 |
/* set 270 minutes timeout */ |
| 239 |
ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL3, (0xf << 4), |
| 240 |
CC3_270MIN_TIMEOUT); |
| 241 |
if (ret < 0) |
| 242 |
goto out; |
| 243 |
/* set IBAT & TBAT monitor */ |
| 244 |
ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL4, |
| 245 |
CC4_IFCHG_MON_EN | CC4_BTEMP_MON_EN, |
| 246 |
CC4_IFCHG_MON_EN | CC4_BTEMP_MON_EN); |
| 247 |
if (ret < 0) |
| 248 |
goto out; |
| 249 |
ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL6, |
| 250 |
CC6_BAT_OV_EN | CC6_BAT_UV_EN | |
| 251 |
CC6_UV_VBAT_SET, |
| 252 |
CC6_BAT_OV_EN | CC6_BAT_UV_EN | |
| 253 |
CC6_UV_VBAT_SET); |
| 254 |
if (ret < 0) |
| 255 |
goto out; |
| 256 |
ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL7, |
| 257 |
CC7_BAT_REM_EN | CC7_IFSM_EN, |
| 258 |
CC7_BAT_REM_EN | CC7_IFSM_EN); |
| 259 |
if (ret < 0) |
| 260 |
goto out; |
| 261 |
/* launch fast-charge */ |
| 262 |
ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3, |
| 263 |
CC1_MODE_FASTCHARGE); |
| 264 |
/* vchg threshold setting */ |
| 265 |
set_vchg_threshold(info, VCHG_NORMAL_LOW, VCHG_NORMAL_HIGH); |
| 266 |
out: |
| 267 |
return ret; |
| 268 |
} |
| 269 |
|
| 270 |
static void stop_charge(struct pm860x_charger_info *info, int vbatt) |
| 271 |
{ |
| 272 |
dev_dbg(info->dev, "Stop charging!\n"); |
| 273 |
pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3, CC1_MODE_OFF); |
| 274 |
if (vbatt > CHARGE_THRESHOLD && info->online) |
| 275 |
set_vbatt_threshold(info, CHARGE_THRESHOLD, 0); |
| 276 |
} |
| 277 |
|
| 278 |
static void power_off_notification(struct pm860x_charger_info *info) |
| 279 |
{ |
| 280 |
dev_dbg(info->dev, "Power-off notification!\n"); |
| 281 |
} |
| 282 |
|
| 283 |
static int set_charging_fsm(struct pm860x_charger_info *info) |
| 284 |
{ |
| 285 |
struct power_supply *psy; |
| 286 |
union power_supply_propval data; |
| 287 |
static const unsigned char fsm_state[][16] = { |
| 288 |
"init", "discharge", "precharge", "fastcharge", |
| 289 |
}; |
| 290 |
int ret; |
| 291 |
int vbatt; |
| 292 |
|
| 293 |
psy = power_supply_get_by_name(pm860x_supplied_to[0]); |
| 294 |
if (!psy) |
| 295 |
return -EINVAL; |
| 296 |
ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| 297 |
&data); |
| 298 |
if (ret) { |
| 299 |
power_supply_put(psy); |
| 300 |
return ret; |
| 301 |
} |
| 302 |
vbatt = data.intval / 1000; |
| 303 |
|
| 304 |
ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_PRESENT, &data); |
| 305 |
if (ret) { |
| 306 |
power_supply_put(psy); |
| 307 |
return ret; |
| 308 |
} |
| 309 |
power_supply_put(psy); |
| 310 |
|
| 311 |
mutex_lock(&info->lock); |
| 312 |
info->present = data.intval; |
| 313 |
|
| 314 |
dev_dbg(info->dev, "Entering FSM:%s, Charger:%s, Battery:%s, " |
| 315 |
"Allowed:%d\n", |
| 316 |
fsm_state[info->state], |
| 317 |
(info->online) ? "online" : "N/A", |
| 318 |
(info->present) ? "present" : "N/A", info->allowed); |
| 319 |
dev_dbg(info->dev, "set_charging_fsm:vbatt:%d(mV)\n", vbatt); |
| 320 |
|
| 321 |
switch (info->state) { |
| 322 |
case FSM_INIT: |
| 323 |
if (info->online && info->present && info->allowed) { |
| 324 |
if (vbatt < PRECHARGE_THRESHOLD) { |
| 325 |
info->state = FSM_PRECHARGE; |
| 326 |
start_precharge(info); |
| 327 |
} else if (vbatt > DISCHARGE_THRESHOLD) { |
| 328 |
info->state = FSM_DISCHARGE; |
| 329 |
stop_charge(info, vbatt); |
| 330 |
} else if (vbatt < DISCHARGE_THRESHOLD) { |
| 331 |
info->state = FSM_FASTCHARGE; |
| 332 |
start_fastcharge(info); |
| 333 |
} |
| 334 |
} else { |
| 335 |
if (vbatt < POWEROFF_THRESHOLD) { |
| 336 |
power_off_notification(info); |
| 337 |
} else { |
| 338 |
info->state = FSM_DISCHARGE; |
| 339 |
stop_charge(info, vbatt); |
| 340 |
} |
| 341 |
} |
| 342 |
break; |
| 343 |
case FSM_PRECHARGE: |
| 344 |
if (info->online && info->present && info->allowed) { |
| 345 |
if (vbatt > PRECHARGE_THRESHOLD) { |
| 346 |
info->state = FSM_FASTCHARGE; |
| 347 |
start_fastcharge(info); |
| 348 |
} |
| 349 |
} else { |
| 350 |
info->state = FSM_DISCHARGE; |
| 351 |
stop_charge(info, vbatt); |
| 352 |
} |
| 353 |
break; |
| 354 |
case FSM_FASTCHARGE: |
| 355 |
if (info->online && info->present && info->allowed) { |
| 356 |
if (vbatt < PRECHARGE_THRESHOLD) { |
| 357 |
info->state = FSM_PRECHARGE; |
| 358 |
start_precharge(info); |
| 359 |
} |
| 360 |
} else { |
| 361 |
info->state = FSM_DISCHARGE; |
| 362 |
stop_charge(info, vbatt); |
| 363 |
} |
| 364 |
break; |
| 365 |
case FSM_DISCHARGE: |
| 366 |
if (info->online && info->present && info->allowed) { |
| 367 |
if (vbatt < PRECHARGE_THRESHOLD) { |
| 368 |
info->state = FSM_PRECHARGE; |
| 369 |
start_precharge(info); |
| 370 |
} else if (vbatt < DISCHARGE_THRESHOLD) { |
| 371 |
info->state = FSM_FASTCHARGE; |
| 372 |
start_fastcharge(info); |
| 373 |
} |
| 374 |
} else { |
| 375 |
if (vbatt < POWEROFF_THRESHOLD) |
| 376 |
power_off_notification(info); |
| 377 |
else if (vbatt > CHARGE_THRESHOLD && info->online) |
| 378 |
set_vbatt_threshold(info, CHARGE_THRESHOLD, 0); |
| 379 |
} |
| 380 |
break; |
| 381 |
default: |
| 382 |
dev_warn(info->dev, "FSM meets wrong state:%d\n", |
| 383 |
info->state); |
| 384 |
break; |
| 385 |
} |
| 386 |
dev_dbg(info->dev, |
| 387 |
"Out FSM:%s, Charger:%s, Battery:%s, Allowed:%d\n", |
| 388 |
fsm_state[info->state], |
| 389 |
(info->online) ? "online" : "N/A", |
| 390 |
(info->present) ? "present" : "N/A", info->allowed); |
| 391 |
mutex_unlock(&info->lock); |
| 392 |
|
| 393 |
return 0; |
| 394 |
} |
| 395 |
|
| 396 |
static irqreturn_t pm860x_charger_handler(int irq, void *data) |
| 397 |
{ |
| 398 |
struct pm860x_charger_info *info = data; |
| 399 |
int ret; |
| 400 |
|
| 401 |
mutex_lock(&info->lock); |
| 402 |
ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2); |
| 403 |
if (ret < 0) { |
| 404 |
mutex_unlock(&info->lock); |
| 405 |
goto out; |
| 406 |
} |
| 407 |
if (ret & STATUS2_CHG) { |
| 408 |
info->online = 1; |
| 409 |
info->allowed = 1; |
| 410 |
} else { |
| 411 |
info->online = 0; |
| 412 |
info->allowed = 0; |
| 413 |
} |
| 414 |
mutex_unlock(&info->lock); |
| 415 |
dev_dbg(info->dev, "%s, Charger:%s, Allowed:%d\n", __func__, |
| 416 |
(info->online) ? "online" : "N/A", info->allowed); |
| 417 |
|
| 418 |
set_charging_fsm(info); |
| 419 |
|
| 420 |
power_supply_changed(info->usb); |
| 421 |
out: |
| 422 |
return IRQ_HANDLED; |
| 423 |
} |
| 424 |
|
| 425 |
static irqreturn_t pm860x_temp_handler(int irq, void *data) |
| 426 |
{ |
| 427 |
struct power_supply *psy; |
| 428 |
struct pm860x_charger_info *info = data; |
| 429 |
union power_supply_propval temp; |
| 430 |
int value; |
| 431 |
int ret; |
| 432 |
|
| 433 |
psy = power_supply_get_by_name(pm860x_supplied_to[0]); |
| 434 |
if (!psy) |
| 435 |
return IRQ_HANDLED; |
| 436 |
ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_TEMP, &temp); |
| 437 |
if (ret) |
| 438 |
goto out; |
| 439 |
value = temp.intval / 10; |
| 440 |
|
| 441 |
mutex_lock(&info->lock); |
| 442 |
/* Temperature < -10 C or >40 C, Will not allow charge */ |
| 443 |
if (value < -10 || value > 40) |
| 444 |
info->allowed = 0; |
| 445 |
else |
| 446 |
info->allowed = 1; |
| 447 |
dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed); |
| 448 |
mutex_unlock(&info->lock); |
| 449 |
|
| 450 |
set_charging_fsm(info); |
| 451 |
out: |
| 452 |
power_supply_put(psy); |
| 453 |
return IRQ_HANDLED; |
| 454 |
} |
| 455 |
|
| 456 |
static irqreturn_t pm860x_exception_handler(int irq, void *data) |
| 457 |
{ |
| 458 |
struct pm860x_charger_info *info = data; |
| 459 |
|
| 460 |
mutex_lock(&info->lock); |
| 461 |
info->allowed = 0; |
| 462 |
mutex_unlock(&info->lock); |
| 463 |
dev_dbg(info->dev, "%s, irq: %d\n", __func__, irq); |
| 464 |
|
| 465 |
set_charging_fsm(info); |
| 466 |
return IRQ_HANDLED; |
| 467 |
} |
| 468 |
|
| 469 |
static irqreturn_t pm860x_done_handler(int irq, void *data) |
| 470 |
{ |
| 471 |
struct pm860x_charger_info *info = data; |
| 472 |
struct power_supply *psy; |
| 473 |
union power_supply_propval val; |
| 474 |
int ret; |
| 475 |
int vbatt; |
| 476 |
|
| 477 |
mutex_lock(&info->lock); |
| 478 |
/* pre-charge done, will transimit to fast-charge stage */ |
| 479 |
if (info->state == FSM_PRECHARGE) { |
| 480 |
info->allowed = 1; |
| 481 |
goto out; |
| 482 |
} |
| 483 |
/* |
| 484 |
* Fast charge done, delay to read |
| 485 |
* the correct status of CHG_DET. |
| 486 |
*/ |
| 487 |
mdelay(5); |
| 488 |
info->allowed = 0; |
| 489 |
psy = power_supply_get_by_name(pm860x_supplied_to[0]); |
| 490 |
if (!psy) |
| 491 |
goto out; |
| 492 |
ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| 493 |
&val); |
| 494 |
if (ret) |
| 495 |
goto out_psy_put; |
| 496 |
vbatt = val.intval / 1000; |
| 497 |
/* |
| 498 |
* CHG_DONE interrupt is faster than CHG_DET interrupt when |
| 499 |
* plug in/out usb, So we can not rely on info->online, we |
| 500 |
* need check pm8607 status register to check usb is online |
| 501 |
* or not, then we can decide it is real charge done |
| 502 |
* automatically or it is triggered by usb plug out; |
| 503 |
*/ |
| 504 |
ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2); |
| 505 |
if (ret < 0) |
| 506 |
goto out_psy_put; |
| 507 |
if (vbatt > CHARGE_THRESHOLD && ret & STATUS2_CHG) |
| 508 |
power_supply_set_property(psy, POWER_SUPPLY_PROP_CHARGE_FULL, |
| 509 |
&val); |
| 510 |
|
| 511 |
out_psy_put: |
| 512 |
power_supply_put(psy); |
| 513 |
out: |
| 514 |
mutex_unlock(&info->lock); |
| 515 |
dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed); |
| 516 |
set_charging_fsm(info); |
| 517 |
|
| 518 |
return IRQ_HANDLED; |
| 519 |
} |
| 520 |
|
| 521 |
static irqreturn_t pm860x_vbattery_handler(int irq, void *data) |
| 522 |
{ |
| 523 |
struct pm860x_charger_info *info = data; |
| 524 |
|
| 525 |
mutex_lock(&info->lock); |
| 526 |
|
| 527 |
set_vbatt_threshold(info, 0, 0); |
| 528 |
|
| 529 |
if (info->present && info->online) |
| 530 |
info->allowed = 1; |
| 531 |
else |
| 532 |
info->allowed = 0; |
| 533 |
mutex_unlock(&info->lock); |
| 534 |
dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed); |
| 535 |
|
| 536 |
set_charging_fsm(info); |
| 537 |
|
| 538 |
return IRQ_HANDLED; |
| 539 |
} |
| 540 |
|
| 541 |
static irqreturn_t pm860x_vchg_handler(int irq, void *data) |
| 542 |
{ |
| 543 |
struct pm860x_charger_info *info = data; |
| 544 |
int vchg = 0; |
| 545 |
|
| 546 |
if (info->present) |
| 547 |
goto out; |
| 548 |
|
| 549 |
measure_vchg(info, &vchg); |
| 550 |
|
| 551 |
mutex_lock(&info->lock); |
| 552 |
if (!info->online) { |
| 553 |
int status; |
| 554 |
/* check if over-temp on pm8606 or not */ |
| 555 |
status = pm860x_reg_read(info->i2c_8606, PM8606_FLAGS); |
| 556 |
if (status & OVER_TEMP_FLAG) { |
| 557 |
/* clear over temp flag and set auto recover */ |
| 558 |
pm860x_set_bits(info->i2c_8606, PM8606_FLAGS, |
| 559 |
OVER_TEMP_FLAG, OVER_TEMP_FLAG); |
| 560 |
pm860x_set_bits(info->i2c_8606, |
| 561 |
PM8606_VSYS, |
| 562 |
OVTEMP_AUTORECOVER, |
| 563 |
OVTEMP_AUTORECOVER); |
| 564 |
dev_dbg(info->dev, |
| 565 |
"%s, pm8606 over-temp occurred\n", __func__); |
| 566 |
} |
| 567 |
} |
| 568 |
|
| 569 |
if (vchg > VCHG_NORMAL_CHECK) { |
| 570 |
set_vchg_threshold(info, VCHG_OVP_LOW, 0); |
| 571 |
info->allowed = 0; |
| 572 |
dev_dbg(info->dev, |
| 573 |
"%s,pm8607 over-vchg occurred,vchg = %dmv\n", |
| 574 |
__func__, vchg); |
| 575 |
} else if (vchg < VCHG_OVP_LOW) { |
| 576 |
set_vchg_threshold(info, VCHG_NORMAL_LOW, |
| 577 |
VCHG_NORMAL_HIGH); |
| 578 |
info->allowed = 1; |
| 579 |
dev_dbg(info->dev, |
| 580 |
"%s,pm8607 over-vchg recover,vchg = %dmv\n", |
| 581 |
__func__, vchg); |
| 582 |
} |
| 583 |
mutex_unlock(&info->lock); |
| 584 |
|
| 585 |
dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed); |
| 586 |
set_charging_fsm(info); |
| 587 |
out: |
| 588 |
return IRQ_HANDLED; |
| 589 |
} |
| 590 |
|
| 591 |
static int pm860x_usb_get_prop(struct power_supply *psy, |
| 592 |
enum power_supply_property psp, |
| 593 |
union power_supply_propval *val) |
| 594 |
{ |
| 595 |
struct pm860x_charger_info *info = power_supply_get_drvdata(psy); |
| 596 |
|
| 597 |
switch (psp) { |
| 598 |
case POWER_SUPPLY_PROP_STATUS: |
| 599 |
if (info->state == FSM_FASTCHARGE || |
| 600 |
info->state == FSM_PRECHARGE) |
| 601 |
val->intval = POWER_SUPPLY_STATUS_CHARGING; |
| 602 |
else |
| 603 |
val->intval = POWER_SUPPLY_STATUS_DISCHARGING; |
| 604 |
break; |
| 605 |
case POWER_SUPPLY_PROP_ONLINE: |
| 606 |
val->intval = info->online; |
| 607 |
break; |
| 608 |
default: |
| 609 |
return -ENODEV; |
| 610 |
} |
| 611 |
return 0; |
| 612 |
} |
| 613 |
|
| 614 |
static enum power_supply_property pm860x_usb_props[] = { |
| 615 |
POWER_SUPPLY_PROP_STATUS, |
| 616 |
POWER_SUPPLY_PROP_ONLINE, |
| 617 |
}; |
| 618 |
|
| 619 |
static int pm860x_init_charger(struct pm860x_charger_info *info) |
| 620 |
{ |
| 621 |
int ret; |
| 622 |
|
| 623 |
ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2); |
| 624 |
if (ret < 0) |
| 625 |
return ret; |
| 626 |
|
| 627 |
mutex_lock(&info->lock); |
| 628 |
info->state = FSM_INIT; |
| 629 |
if (ret & STATUS2_CHG) { |
| 630 |
info->online = 1; |
| 631 |
info->allowed = 1; |
| 632 |
} else { |
| 633 |
info->online = 0; |
| 634 |
info->allowed = 0; |
| 635 |
} |
| 636 |
mutex_unlock(&info->lock); |
| 637 |
|
| 638 |
set_charging_fsm(info); |
| 639 |
return 0; |
| 640 |
} |
| 641 |
|
| 642 |
static struct pm860x_irq_desc { |
| 643 |
const char *name; |
| 644 |
irqreturn_t (*handler)(int irq, void *data); |
| 645 |
} pm860x_irq_descs[] = { |
| 646 |
{ "usb supply detect", pm860x_charger_handler }, |
| 647 |
{ "charge done", pm860x_done_handler }, |
| 648 |
{ "charge timeout", pm860x_exception_handler }, |
| 649 |
{ "charge fault", pm860x_exception_handler }, |
| 650 |
{ "temperature", pm860x_temp_handler }, |
| 651 |
{ "vbatt", pm860x_vbattery_handler }, |
| 652 |
{ "vchg", pm860x_vchg_handler }, |
| 653 |
}; |
| 654 |
|
| 655 |
static const struct power_supply_desc pm860x_charger_desc = { |
| 656 |
.name = "usb", |
| 657 |
.type = POWER_SUPPLY_TYPE_USB, |
| 658 |
.properties = pm860x_usb_props, |
| 659 |
.num_properties = ARRAY_SIZE(pm860x_usb_props), |
| 660 |
.get_property = pm860x_usb_get_prop, |
| 661 |
}; |
| 662 |
|
| 663 |
static int pm860x_charger_probe(struct platform_device *pdev) |
| 664 |
{ |
| 665 |
struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); |
| 666 |
struct power_supply_config psy_cfg = {}; |
| 667 |
struct pm860x_charger_info *info; |
| 668 |
int ret; |
| 669 |
int count; |
| 670 |
int i; |
| 671 |
int j; |
| 672 |
|
| 673 |
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); |
| 674 |
if (!info) |
| 675 |
return -ENOMEM; |
| 676 |
|
| 677 |
count = pdev->num_resources; |
| 678 |
for (i = 0, j = 0; i < count; i++) { |
| 679 |
info->irq[j] = platform_get_irq(pdev, i); |
| 680 |
if (info->irq[j] < 0) |
| 681 |
continue; |
| 682 |
j++; |
| 683 |
} |
| 684 |
info->irq_nums = j; |
| 685 |
|
| 686 |
info->chip = chip; |
| 687 |
info->i2c = |
| 688 |
(chip->id == CHIP_PM8607) ? chip->client : chip->companion; |
| 689 |
info->i2c_8606 = |
| 690 |
(chip->id == CHIP_PM8607) ? chip->companion : chip->client; |
| 691 |
if (!info->i2c_8606) { |
| 692 |
dev_err(&pdev->dev, "Missed I2C address of 88PM8606!\n"); |
| 693 |
return -EINVAL; |
| 694 |
} |
| 695 |
info->dev = &pdev->dev; |
| 696 |
|
| 697 |
/* set init value for the case we are not using battery */ |
| 698 |
set_vchg_threshold(info, VCHG_NORMAL_LOW, VCHG_OVP_LOW); |
| 699 |
|
| 700 |
mutex_init(&info->lock); |
| 701 |
platform_set_drvdata(pdev, info); |
| 702 |
|
| 703 |
psy_cfg.drv_data = info; |
| 704 |
psy_cfg.supplied_to = pm860x_supplied_to; |
| 705 |
psy_cfg.num_supplicants = ARRAY_SIZE(pm860x_supplied_to); |
| 706 |
info->usb = devm_power_supply_register(&pdev->dev, &pm860x_charger_desc, |
| 707 |
&psy_cfg); |
| 708 |
if (IS_ERR(info->usb)) { |
| 709 |
return PTR_ERR(info->usb); |
| 710 |
} |
| 711 |
|
| 712 |
pm860x_init_charger(info); |
| 713 |
|
| 714 |
for (i = 0; i < ARRAY_SIZE(info->irq); i++) { |
| 715 |
ret = devm_request_threaded_irq(&pdev->dev, info->irq[i], NULL, |
| 716 |
pm860x_irq_descs[i].handler, |
| 717 |
IRQF_ONESHOT, |
| 718 |
pm860x_irq_descs[i].name, info); |
| 719 |
if (ret < 0) { |
| 720 |
dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n", |
| 721 |
info->irq[i], ret); |
| 722 |
return ret; |
| 723 |
} |
| 724 |
} |
| 725 |
return 0; |
| 726 |
} |
| 727 |
|
| 728 |
static struct platform_driver pm860x_charger_driver = { |
| 729 |
.driver = { |
| 730 |
.name = "88pm860x-charger", |
| 731 |
}, |
| 732 |
.probe = pm860x_charger_probe, |
| 733 |
}; |
| 734 |
module_platform_driver(pm860x_charger_driver); |
| 735 |
|
| 736 |
MODULE_DESCRIPTION("Marvell 88PM860x Charger driver"); |
| 737 |
MODULE_LICENSE("GPL"); |