Debian Codegraph @

arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts

raw
1 // SPDX-License-Identifier: GPL-2.0
2 #include "qcom-msm8974pro.dtsi"
3 #include "pm8841.dtsi"
4 #include "pm8941.dtsi"
5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/leds/common.h>
7 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
8
9 / {
10 model = "Fairphone 2";
11 compatible = "fairphone,fp2", "qcom,msm8974pro", "qcom,msm8974";
12 chassis-type = "handset";
13
14 aliases {
15 mmc0 = &sdhc_1;
16 mmc1 = &sdhc_2;
17 serial0 = &blsp1_uart2;
18 };
19
20 chosen {
21 stdout-path = "serial0:115200n8";
22 };
23
24 gpio-keys {
25 compatible = "gpio-keys";
26
27 pinctrl-names = "default";
28 pinctrl-0 = <&gpio_keys_pin_a>;
29
30 key-camera-snapshot {
31 label = "camera_snapshot";
32 gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>;
33 linux,code = <KEY_CAMERA>;
34 wakeup-source;
35 debounce-interval = <15>;
36 };
37
38 key-volume-down {
39 label = "volume_down";
40 gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
41 linux,code = <KEY_VOLUMEDOWN>;
42 wakeup-source;
43 debounce-interval = <15>;
44 };
45
46 key-volume-up {
47 label = "volume_up";
48 gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
49 linux,code = <KEY_VOLUMEUP>;
50 wakeup-source;
51 debounce-interval = <15>;
52 };
53 };
54
55 vibrator {
56 compatible = "gpio-vibrator";
57 enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
58 vcc-supply = <&pm8941_l18>;
59 };
60
61 vreg_boost: vreg-boost {
62 compatible = "regulator-fixed";
63
64 regulator-name = "vreg-boost";
65 regulator-min-microvolt = <3150000>;
66 regulator-max-microvolt = <3150000>;
67
68 regulator-always-on;
69 regulator-boot-on;
70
71 gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
72 enable-active-high;
73
74 pinctrl-names = "default";
75 pinctrl-0 = <&boost_bypass_n_pin>;
76 };
77
78 vreg_vph_pwr: vreg-vph-pwr {
79 compatible = "regulator-fixed";
80 regulator-name = "vph-pwr";
81
82 regulator-min-microvolt = <3600000>;
83 regulator-max-microvolt = <3600000>;
84
85 regulator-always-on;
86 };
87 };
88
89 &blsp1_i2c2 {
90 status = "okay";
91
92 touchscreen@41 {
93 compatible = "ilitek,ili2120";
94 reg = <0x41>;
95 interrupt-parent = <&tlmm>;
96 interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
97 reset-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>;
98
99 touchscreen-size-x = <1080>;
100 touchscreen-size-y = <1920>;
101 };
102 };
103
104 &blsp1_uart2 {
105 status = "okay";
106 };
107
108 &imem {
109 reboot-mode {
110 mode-normal = <0x77665501>;
111 mode-bootloader = <0x77665500>;
112 mode-recovery = <0x77665502>;
113 };
114 };
115
116 &pm8941_gpios {
117 gpio_keys_pin_a: gpio-keys-active-state {
118 pins = "gpio1", "gpio2", "gpio5";
119 function = "normal";
120
121 bias-pull-up;
122 power-source = <PM8941_GPIO_S3>;
123 };
124 };
125
126 &pm8941_lpg {
127 status = "okay";
128
129 qcom,power-source = <1>;
130
131 multi-led {
132 color = <LED_COLOR_ID_RGB>;
133 function = LED_FUNCTION_STATUS;
134
135 #address-cells = <1>;
136 #size-cells = <0>;
137
138 led@7 {
139 reg = <7>;
140 color = <LED_COLOR_ID_RED>;
141 };
142
143 led@6 {
144 reg = <6>;
145 color = <LED_COLOR_ID_GREEN>;
146 };
147
148 led@5 {
149 reg = <5>;
150 color = <LED_COLOR_ID_BLUE>;
151 };
152 };
153 };
154
155 &pronto {
156 status = "okay";
157
158 vddmx-supply = <&pm8841_s1>;
159 vddpx-supply = <&pm8941_s3>;
160
161 pinctrl-names = "default";
162 pinctrl-0 = <&wcnss_pin_a>;
163
164 iris {
165 vddxo-supply = <&pm8941_l6>;
166 vddrfa-supply = <&pm8941_l11>;
167 vddpa-supply = <&pm8941_l19>;
168 vdddig-supply = <&pm8941_s3>;
169 };
170
171 smd-edge {
172 qcom,remote-pid = <4>;
173 label = "pronto";
174
175 wcnss {
176 status = "okay";
177 };
178 };
179 };
180
181 &remoteproc_adsp {
182 status = "okay";
183 };
184
185 &remoteproc_mss {
186 status = "okay";
187 mss-supply = <&pm8841_s3>;
188 mx-supply = <&pm8841_s1>;
189 pll-supply = <&pm8941_l12>;
190 };
191
192 &rpm_requests {
193 regulators-0 {
194 compatible = "qcom,rpm-pm8841-regulators";
195
196 pm8841_s1: s1 {
197 regulator-min-microvolt = <675000>;
198 regulator-max-microvolt = <1050000>;
199 };
200
201 pm8841_s3: s3 {
202 regulator-min-microvolt = <1050000>;
203 regulator-max-microvolt = <1050000>;
204 };
205 };
206
207 regulators-1 {
208 compatible = "qcom,rpm-pm8941-regulators";
209
210 vdd_l1_l3-supply = <&pm8941_s1>;
211 vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
212 vdd_l4_l11-supply = <&pm8941_s1>;
213 vdd_l5_l7-supply = <&pm8941_s2>;
214 vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
215 vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
216 vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
217 vdd_l21-supply = <&vreg_boost>;
218
219 pm8941_s1: s1 {
220 regulator-min-microvolt = <1300000>;
221 regulator-max-microvolt = <1300000>;
222 regulator-always-on;
223 regulator-boot-on;
224 };
225
226 pm8941_s2: s2 {
227 regulator-min-microvolt = <2150000>;
228 regulator-max-microvolt = <2150000>;
229 regulator-boot-on;
230 };
231
232 pm8941_s3: s3 {
233 regulator-min-microvolt = <1800000>;
234 regulator-max-microvolt = <1800000>;
235 regulator-always-on;
236 regulator-boot-on;
237 };
238
239 pm8941_l1: l1 {
240 regulator-min-microvolt = <1225000>;
241 regulator-max-microvolt = <1225000>;
242 regulator-always-on;
243 regulator-boot-on;
244 };
245
246 pm8941_l2: l2 {
247 regulator-min-microvolt = <1200000>;
248 regulator-max-microvolt = <1200000>;
249 };
250
251 pm8941_l3: l3 {
252 regulator-min-microvolt = <1225000>;
253 regulator-max-microvolt = <1225000>;
254 };
255
256 pm8941_l4: l4 {
257 regulator-min-microvolt = <1225000>;
258 regulator-max-microvolt = <1225000>;
259 };
260
261 pm8941_l5: l5 {
262 regulator-min-microvolt = <1800000>;
263 regulator-max-microvolt = <1800000>;
264 };
265
266 pm8941_l6: l6 {
267 regulator-min-microvolt = <1800000>;
268 regulator-max-microvolt = <1800000>;
269 regulator-boot-on;
270 };
271
272 pm8941_l7: l7 {
273 regulator-min-microvolt = <1800000>;
274 regulator-max-microvolt = <1800000>;
275 regulator-boot-on;
276 };
277
278 pm8941_l8: l8 {
279 regulator-min-microvolt = <1800000>;
280 regulator-max-microvolt = <1800000>;
281 };
282
283 pm8941_l9: l9 {
284 regulator-min-microvolt = <1800000>;
285 regulator-max-microvolt = <2950000>;
286 };
287
288 pm8941_l10: l10 {
289 regulator-min-microvolt = <1800000>;
290 regulator-max-microvolt = <2950000>;
291 };
292
293 pm8941_l11: l11 {
294 regulator-min-microvolt = <1225000>;
295 regulator-max-microvolt = <1350000>;
296 };
297
298 pm8941_l12: l12 {
299 regulator-min-microvolt = <1800000>;
300 regulator-max-microvolt = <1800000>;
301 regulator-always-on;
302 regulator-boot-on;
303 };
304
305 pm8941_l13: l13 {
306 regulator-min-microvolt = <1800000>;
307 regulator-max-microvolt = <2950000>;
308 regulator-boot-on;
309 };
310
311 pm8941_l14: l14 {
312 regulator-min-microvolt = <1800000>;
313 regulator-max-microvolt = <1800000>;
314 };
315
316 pm8941_l15: l15 {
317 regulator-min-microvolt = <2050000>;
318 regulator-max-microvolt = <2050000>;
319 };
320
321 pm8941_l16: l16 {
322 regulator-min-microvolt = <2700000>;
323 regulator-max-microvolt = <2700000>;
324 };
325
326 pm8941_l17: l17 {
327 regulator-min-microvolt = <2850000>;
328 regulator-max-microvolt = <2850000>;
329 };
330
331 pm8941_l18: l18 {
332 regulator-min-microvolt = <2850000>;
333 regulator-max-microvolt = <2850000>;
334 };
335
336 pm8941_l19: l19 {
337 regulator-min-microvolt = <2900000>;
338 regulator-max-microvolt = <3350000>;
339 };
340
341 pm8941_l20: l20 {
342 regulator-min-microvolt = <2950000>;
343 regulator-max-microvolt = <2950000>;
344 regulator-system-load = <200000>;
345 regulator-allow-set-load;
346 regulator-boot-on;
347 };
348
349 pm8941_l21: l21 {
350 regulator-min-microvolt = <2950000>;
351 regulator-max-microvolt = <2950000>;
352 regulator-boot-on;
353 };
354
355 pm8941_l22: l22 {
356 regulator-min-microvolt = <3000000>;
357 regulator-max-microvolt = <3300000>;
358 };
359
360 pm8941_l23: l23 {
361 regulator-min-microvolt = <3000000>;
362 regulator-max-microvolt = <3000000>;
363 };
364
365 pm8941_l24: l24 {
366 regulator-min-microvolt = <3075000>;
367 regulator-max-microvolt = <3075000>;
368 regulator-boot-on;
369 };
370 };
371 };
372
373 &sdhc_1 {
374 status = "okay";
375
376 vmmc-supply = <&pm8941_l20>;
377 vqmmc-supply = <&pm8941_s3>;
378
379 pinctrl-names = "default", "sleep";
380 pinctrl-0 = <&sdc1_on>;
381 pinctrl-1 = <&sdc1_off>;
382 };
383
384 &sdhc_2 {
385 status = "okay";
386
387 vmmc-supply = <&pm8941_l21>;
388 vqmmc-supply = <&pm8941_l13>;
389
390 pinctrl-names = "default", "sleep";
391 pinctrl-0 = <&sdc2_on>;
392 pinctrl-1 = <&sdc2_off>;
393 };
394
395 &smbb {
396 usb-charge-current-limit = <1500000>;
397 qcom,fast-charge-safe-current = <1500000>;
398 qcom,fast-charge-current-limit = <1500000>;
399 qcom,fast-charge-safe-voltage = <4380000>;
400 qcom,fast-charge-high-threshold-voltage = <4350000>;
401 qcom,auto-recharge-threshold-voltage = <4240000>;
402 qcom,minimum-input-voltage = <4450000>;
403
404 status = "okay";
405 };
406
407 &tlmm {
408 sdc1_on: sdc1-on-state {
409 clk-pins {
410 pins = "sdc1_clk";
411 drive-strength = <16>;
412 bias-disable;
413 };
414
415 cmd-data-pins {
416 pins = "sdc1_cmd", "sdc1_data";
417 drive-strength = <10>;
418 bias-pull-up;
419 };
420 };
421
422 sdc2_on: sdc2-on-state {
423 clk-pins {
424 pins = "sdc2_clk";
425 drive-strength = <10>;
426 bias-disable;
427 };
428
429 cmd-data-pins {
430 pins = "sdc2_cmd", "sdc2_data";
431 drive-strength = <6>;
432 bias-pull-up;
433 };
434 };
435
436 wcnss_pin_a: wcnss-pin-active-state {
437 wlan-pins {
438 pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
439 function = "wlan";
440
441 drive-strength = <6>;
442 bias-pull-down;
443 };
444
445 bt-pins {
446 pins = "gpio35", "gpio43", "gpio44";
447 function = "bt";
448
449 drive-strength = <2>;
450 bias-pull-down;
451 };
452
453 fm-pins {
454 pins = "gpio41", "gpio42";
455 function = "fm";
456
457 drive-strength = <2>;
458 bias-pull-down;
459 };
460 };
461 };
462
463 &usb {
464 status = "okay";
465
466 phys = <&usb_hs1_phy>;
467 phy-select = <&tcsr 0xb000 0>;
468 extcon = <&smbb>, <&usb_id>;
469 vbus-supply = <&chg_otg>;
470
471 hnp-disable;
472 srp-disable;
473 adp-disable;
474 };
475
476 &usb_hs1_phy {
477 status = "okay";
478
479 v1p8-supply = <&pm8941_l6>;
480 v3p3-supply = <&pm8941_l24>;
481
482 extcon = <&smbb>;
483 qcom,init-seq = /bits/ 8 <0x1 0x64>;
484 };