| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
#include "qcom-ipq8064.dtsi" |
| 3 |
#include <dt-bindings/input/input.h> |
| 4 |
#include <dt-bindings/leds/common.h> |
| 5 |
|
| 6 |
/ { |
| 7 |
model = "Qualcomm Technologies, Inc. IPQ8064-v1.0"; |
| 8 |
|
| 9 |
aliases { |
| 10 |
serial0 = &gsbi4_serial; |
| 11 |
}; |
| 12 |
|
| 13 |
chosen { |
| 14 |
stdout-path = "serial0:115200n8"; |
| 15 |
}; |
| 16 |
|
| 17 |
gpio-keys { |
| 18 |
compatible = "gpio-keys"; |
| 19 |
pinctrl-0 = <&buttons_pins>; |
| 20 |
pinctrl-names = "default"; |
| 21 |
|
| 22 |
button-1 { |
| 23 |
label = "reset"; |
| 24 |
linux,code = <KEY_RESTART>; |
| 25 |
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; |
| 26 |
linux,input-type = <1>; |
| 27 |
debounce-interval = <60>; |
| 28 |
}; |
| 29 |
button-2 { |
| 30 |
label = "wps"; |
| 31 |
linux,code = <KEY_WPS_BUTTON>; |
| 32 |
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; |
| 33 |
linux,input-type = <1>; |
| 34 |
debounce-interval = <60>; |
| 35 |
}; |
| 36 |
}; |
| 37 |
|
| 38 |
leds { |
| 39 |
compatible = "gpio-leds"; |
| 40 |
pinctrl-0 = <&leds_pins>; |
| 41 |
pinctrl-names = "default"; |
| 42 |
|
| 43 |
led-0 { |
| 44 |
label = "led_usb1"; |
| 45 |
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; |
| 46 |
linux,default-trigger = "usbdev"; |
| 47 |
default-state = "off"; |
| 48 |
}; |
| 49 |
|
| 50 |
led-1 { |
| 51 |
label = "led_usb3"; |
| 52 |
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; |
| 53 |
linux,default-trigger = "usbdev"; |
| 54 |
default-state = "off"; |
| 55 |
}; |
| 56 |
|
| 57 |
led-2 { |
| 58 |
label = "status_led_fail"; |
| 59 |
function = LED_FUNCTION_STATUS; |
| 60 |
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; |
| 61 |
default-state = "off"; |
| 62 |
}; |
| 63 |
|
| 64 |
led-3 { |
| 65 |
label = "sata_led"; |
| 66 |
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; |
| 67 |
default-state = "off"; |
| 68 |
}; |
| 69 |
|
| 70 |
led-4 { |
| 71 |
label = "status_led_pass"; |
| 72 |
function = LED_FUNCTION_STATUS; |
| 73 |
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; |
| 74 |
default-state = "off"; |
| 75 |
}; |
| 76 |
}; |
| 77 |
|
| 78 |
soc { |
| 79 |
gsbi@16300000 { |
| 80 |
qcom,mode = <GSBI_PROT_I2C_UART>; |
| 81 |
status = "okay"; |
| 82 |
|
| 83 |
serial@16340000 { |
| 84 |
status = "okay"; |
| 85 |
}; |
| 86 |
}; |
| 87 |
|
| 88 |
gsbi5: gsbi@1a200000 { |
| 89 |
qcom,mode = <GSBI_PROT_SPI>; |
| 90 |
status = "okay"; |
| 91 |
|
| 92 |
spi4: spi@1a280000 { |
| 93 |
status = "okay"; |
| 94 |
|
| 95 |
pinctrl-0 = <&spi_pins>; |
| 96 |
pinctrl-names = "default"; |
| 97 |
|
| 98 |
cs-gpios = <&qcom_pinmux 20 0>; |
| 99 |
|
| 100 |
flash: flash@0 { |
| 101 |
compatible = "s25fl256s1"; |
| 102 |
#address-cells = <1>; |
| 103 |
#size-cells = <1>; |
| 104 |
spi-max-frequency = <50000000>; |
| 105 |
reg = <0>; |
| 106 |
|
| 107 |
partition@0 { |
| 108 |
label = "rootfs"; |
| 109 |
reg = <0x0 0x1000000>; |
| 110 |
}; |
| 111 |
|
| 112 |
partition@1 { |
| 113 |
label = "scratch"; |
| 114 |
reg = <0x1000000 0x1000000>; |
| 115 |
}; |
| 116 |
}; |
| 117 |
}; |
| 118 |
}; |
| 119 |
|
| 120 |
sata-phy@1b400000 { |
| 121 |
status = "okay"; |
| 122 |
}; |
| 123 |
|
| 124 |
sata@29000000 { |
| 125 |
ports-implemented = <0x1>; |
| 126 |
status = "okay"; |
| 127 |
}; |
| 128 |
}; |
| 129 |
}; |