| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
#include <dt-bindings/input/input.h> |
| 3 |
|
| 4 |
#include "qcom-msm8960.dtsi" |
| 5 |
#include "pm8921.dtsi" |
| 6 |
|
| 7 |
/ { |
| 8 |
model = "Qualcomm MSM8960 CDP"; |
| 9 |
compatible = "qcom,msm8960-cdp", "qcom,msm8960"; |
| 10 |
|
| 11 |
aliases { |
| 12 |
serial0 = &gsbi5_serial; |
| 13 |
}; |
| 14 |
|
| 15 |
chosen { |
| 16 |
stdout-path = "serial0:115200n8"; |
| 17 |
}; |
| 18 |
|
| 19 |
ext_l2: gpio-regulator { |
| 20 |
compatible = "regulator-fixed"; |
| 21 |
regulator-name = "ext_l2"; |
| 22 |
gpio = <&tlmm 91 0>; |
| 23 |
startup-delay-us = <10000>; |
| 24 |
enable-active-high; |
| 25 |
}; |
| 26 |
}; |
| 27 |
|
| 28 |
&gsbi1 { |
| 29 |
qcom,mode = <GSBI_PROT_SPI>; |
| 30 |
pinctrl-names = "default"; |
| 31 |
pinctrl-0 = <&spi1_default>; |
| 32 |
status = "okay"; |
| 33 |
}; |
| 34 |
|
| 35 |
&gsbi1_spi { |
| 36 |
status = "okay"; |
| 37 |
|
| 38 |
ethernet@0 { |
| 39 |
compatible = "micrel,ks8851"; |
| 40 |
reg = <0>; |
| 41 |
interrupt-parent = <&tlmm>; |
| 42 |
interrupts = <90 IRQ_TYPE_LEVEL_LOW>; |
| 43 |
spi-max-frequency = <5400000>; |
| 44 |
vdd-supply = <&ext_l2>; |
| 45 |
vdd-io-supply = <&pm8921_lvs6>; |
| 46 |
reset-gpios = <&tlmm 89 0>; |
| 47 |
}; |
| 48 |
}; |
| 49 |
|
| 50 |
&gsbi5 { |
| 51 |
qcom,mode = <GSBI_PROT_I2C_UART>; |
| 52 |
status = "okay"; |
| 53 |
}; |
| 54 |
|
| 55 |
&gsbi5_serial { |
| 56 |
status = "okay"; |
| 57 |
}; |
| 58 |
|
| 59 |
&tlmm { |
| 60 |
spi1_default: spi1-default-state { |
| 61 |
mosi-pins { |
| 62 |
pins = "gpio6"; |
| 63 |
function = "gsbi1"; |
| 64 |
drive-strength = <12>; |
| 65 |
bias-disable; |
| 66 |
}; |
| 67 |
|
| 68 |
miso-pins { |
| 69 |
pins = "gpio7"; |
| 70 |
function = "gsbi1"; |
| 71 |
drive-strength = <12>; |
| 72 |
bias-disable; |
| 73 |
}; |
| 74 |
|
| 75 |
cs-pins { |
| 76 |
pins = "gpio8"; |
| 77 |
function = "gsbi1"; |
| 78 |
drive-strength = <12>; |
| 79 |
bias-disable; |
| 80 |
output-low; |
| 81 |
}; |
| 82 |
|
| 83 |
clk-pins { |
| 84 |
pins = "gpio9"; |
| 85 |
function = "gsbi1"; |
| 86 |
drive-strength = <12>; |
| 87 |
bias-disable; |
| 88 |
}; |
| 89 |
}; |
| 90 |
}; |
| 91 |
|
| 92 |
&pm8921 { |
| 93 |
interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; |
| 94 |
}; |
| 95 |
|
| 96 |
&pm8921_keypad { |
| 97 |
linux,keymap = < |
| 98 |
MATRIX_KEY(0, 0, KEY_VOLUMEUP) |
| 99 |
MATRIX_KEY(0, 1, KEY_VOLUMEDOWN) |
| 100 |
MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS) |
| 101 |
MATRIX_KEY(0, 3, KEY_CAMERA) |
| 102 |
>; |
| 103 |
keypad,num-rows = <1>; |
| 104 |
keypad,num-columns = <5>; |
| 105 |
|
| 106 |
status = "okay"; |
| 107 |
}; |
| 108 |
|
| 109 |
&rpm { |
| 110 |
regulators { |
| 111 |
compatible = "qcom,rpm-pm8921-regulators"; |
| 112 |
vin_lvs1_3_6-supply = <&pm8921_s4>; |
| 113 |
vin_lvs2-supply = <&pm8921_s4>; |
| 114 |
vin_lvs4_5_7-supply = <&pm8921_s4>; |
| 115 |
vdd_ncp-supply = <&pm8921_l6>; |
| 116 |
vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; |
| 117 |
vdd_l21_l23_l29-supply = <&pm8921_s8>; |
| 118 |
vdd_l24-supply = <&pm8921_s1>; |
| 119 |
vdd_l25-supply = <&pm8921_s1>; |
| 120 |
vdd_l27-supply = <&pm8921_s7>; |
| 121 |
vdd_l28-supply = <&pm8921_s7>; |
| 122 |
|
| 123 |
/* Buck SMPS */ |
| 124 |
pm8921_s1: s1 { |
| 125 |
regulator-always-on; |
| 126 |
regulator-min-microvolt = <1225000>; |
| 127 |
regulator-max-microvolt = <1225000>; |
| 128 |
qcom,switch-mode-frequency = <3200000>; |
| 129 |
bias-pull-down; |
| 130 |
}; |
| 131 |
|
| 132 |
pm8921_s2: s2 { |
| 133 |
regulator-min-microvolt = <1300000>; |
| 134 |
regulator-max-microvolt = <1300000>; |
| 135 |
qcom,switch-mode-frequency = <1600000>; |
| 136 |
bias-pull-down; |
| 137 |
}; |
| 138 |
|
| 139 |
pm8921_s3: s3 { |
| 140 |
regulator-min-microvolt = <500000>; |
| 141 |
regulator-max-microvolt = <1150000>; |
| 142 |
qcom,switch-mode-frequency = <4800000>; |
| 143 |
bias-pull-down; |
| 144 |
}; |
| 145 |
|
| 146 |
pm8921_s4: s4 { |
| 147 |
regulator-always-on; |
| 148 |
regulator-min-microvolt = <1800000>; |
| 149 |
regulator-max-microvolt = <1800000>; |
| 150 |
qcom,switch-mode-frequency = <1600000>; |
| 151 |
bias-pull-down; |
| 152 |
qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; |
| 153 |
}; |
| 154 |
|
| 155 |
pm8921_s7: s7 { |
| 156 |
regulator-min-microvolt = <1150000>; |
| 157 |
regulator-max-microvolt = <1150000>; |
| 158 |
qcom,switch-mode-frequency = <3200000>; |
| 159 |
bias-pull-down; |
| 160 |
}; |
| 161 |
|
| 162 |
pm8921_s8: s8 { |
| 163 |
regulator-always-on; |
| 164 |
regulator-min-microvolt = <2050000>; |
| 165 |
regulator-max-microvolt = <2050000>; |
| 166 |
qcom,switch-mode-frequency = <1600000>; |
| 167 |
bias-pull-down; |
| 168 |
}; |
| 169 |
|
| 170 |
/* PMOS LDO */ |
| 171 |
pm8921_l1: l1 { |
| 172 |
regulator-always-on; |
| 173 |
regulator-min-microvolt = <1050000>; |
| 174 |
regulator-max-microvolt = <1050000>; |
| 175 |
bias-pull-down; |
| 176 |
}; |
| 177 |
|
| 178 |
pm8921_l2: l2 { |
| 179 |
regulator-min-microvolt = <1200000>; |
| 180 |
regulator-max-microvolt = <1200000>; |
| 181 |
bias-pull-down; |
| 182 |
}; |
| 183 |
|
| 184 |
pm8921_l3: l3 { |
| 185 |
regulator-min-microvolt = <3075000>; |
| 186 |
regulator-max-microvolt = <3075000>; |
| 187 |
bias-pull-down; |
| 188 |
}; |
| 189 |
|
| 190 |
pm8921_l4: l4 { |
| 191 |
regulator-always-on; |
| 192 |
regulator-min-microvolt = <1800000>; |
| 193 |
regulator-max-microvolt = <1800000>; |
| 194 |
bias-pull-down; |
| 195 |
}; |
| 196 |
|
| 197 |
pm8921_l5: l5 { |
| 198 |
regulator-min-microvolt = <2950000>; |
| 199 |
regulator-max-microvolt = <2950000>; |
| 200 |
bias-pull-down; |
| 201 |
}; |
| 202 |
|
| 203 |
pm8921_l6: l6 { |
| 204 |
regulator-min-microvolt = <2950000>; |
| 205 |
regulator-max-microvolt = <2950000>; |
| 206 |
bias-pull-down; |
| 207 |
}; |
| 208 |
|
| 209 |
pm8921_l7: l7 { |
| 210 |
regulator-always-on; |
| 211 |
regulator-min-microvolt = <1850000>; |
| 212 |
regulator-max-microvolt = <2950000>; |
| 213 |
bias-pull-down; |
| 214 |
}; |
| 215 |
|
| 216 |
pm8921_l8: l8 { |
| 217 |
regulator-min-microvolt = <2800000>; |
| 218 |
regulator-max-microvolt = <3000000>; |
| 219 |
bias-pull-down; |
| 220 |
}; |
| 221 |
|
| 222 |
pm8921_l9: l9 { |
| 223 |
regulator-min-microvolt = <3000000>; |
| 224 |
regulator-max-microvolt = <3000000>; |
| 225 |
bias-pull-down; |
| 226 |
}; |
| 227 |
|
| 228 |
pm8921_l10: l10 { |
| 229 |
regulator-min-microvolt = <3000000>; |
| 230 |
regulator-max-microvolt = <3000000>; |
| 231 |
bias-pull-down; |
| 232 |
}; |
| 233 |
|
| 234 |
pm8921_l11: l11 { |
| 235 |
regulator-min-microvolt = <2850000>; |
| 236 |
regulator-max-microvolt = <2850000>; |
| 237 |
bias-pull-down; |
| 238 |
}; |
| 239 |
|
| 240 |
pm8921_l12: l12 { |
| 241 |
regulator-min-microvolt = <1200000>; |
| 242 |
regulator-max-microvolt = <1200000>; |
| 243 |
bias-pull-down; |
| 244 |
}; |
| 245 |
|
| 246 |
pm8921_l14: l14 { |
| 247 |
regulator-min-microvolt = <1800000>; |
| 248 |
regulator-max-microvolt = <1800000>; |
| 249 |
bias-pull-down; |
| 250 |
}; |
| 251 |
|
| 252 |
pm8921_l15: l15 { |
| 253 |
regulator-min-microvolt = <1800000>; |
| 254 |
regulator-max-microvolt = <2950000>; |
| 255 |
bias-pull-down; |
| 256 |
}; |
| 257 |
|
| 258 |
pm8921_l16: l16 { |
| 259 |
regulator-min-microvolt = <2800000>; |
| 260 |
regulator-max-microvolt = <2800000>; |
| 261 |
bias-pull-down; |
| 262 |
}; |
| 263 |
|
| 264 |
pm8921_l17: l17 { |
| 265 |
regulator-min-microvolt = <1800000>; |
| 266 |
regulator-max-microvolt = <2950000>; |
| 267 |
bias-pull-down; |
| 268 |
}; |
| 269 |
|
| 270 |
pm8921_l18: l18 { |
| 271 |
regulator-min-microvolt = <1300000>; |
| 272 |
regulator-max-microvolt = <1300000>; |
| 273 |
bias-pull-down; |
| 274 |
}; |
| 275 |
|
| 276 |
pm8921_l21: l21 { |
| 277 |
regulator-min-microvolt = <1900000>; |
| 278 |
regulator-max-microvolt = <1900000>; |
| 279 |
bias-pull-down; |
| 280 |
}; |
| 281 |
|
| 282 |
pm8921_l22: l22 { |
| 283 |
regulator-min-microvolt = <2750000>; |
| 284 |
regulator-max-microvolt = <2750000>; |
| 285 |
bias-pull-down; |
| 286 |
}; |
| 287 |
|
| 288 |
pm8921_l23: l23 { |
| 289 |
regulator-always-on; |
| 290 |
regulator-min-microvolt = <1800000>; |
| 291 |
regulator-max-microvolt = <1800000>; |
| 292 |
bias-pull-down; |
| 293 |
}; |
| 294 |
|
| 295 |
pm8921_l24: l24 { |
| 296 |
regulator-min-microvolt = <750000>; |
| 297 |
regulator-max-microvolt = <1150000>; |
| 298 |
bias-pull-down; |
| 299 |
}; |
| 300 |
|
| 301 |
pm8921_l25: l25 { |
| 302 |
regulator-always-on; |
| 303 |
regulator-min-microvolt = <1250000>; |
| 304 |
regulator-max-microvolt = <1250000>; |
| 305 |
bias-pull-down; |
| 306 |
}; |
| 307 |
|
| 308 |
/* Low Voltage Switch */ |
| 309 |
pm8921_lvs1: lvs1 { |
| 310 |
bias-pull-down; |
| 311 |
}; |
| 312 |
|
| 313 |
pm8921_lvs2: lvs2 { |
| 314 |
bias-pull-down; |
| 315 |
}; |
| 316 |
|
| 317 |
pm8921_lvs3: lvs3 { |
| 318 |
bias-pull-down; |
| 319 |
}; |
| 320 |
|
| 321 |
pm8921_lvs4: lvs4 { |
| 322 |
bias-pull-down; |
| 323 |
}; |
| 324 |
|
| 325 |
pm8921_lvs5: lvs5 { |
| 326 |
bias-pull-down; |
| 327 |
}; |
| 328 |
|
| 329 |
pm8921_lvs6: lvs6 { |
| 330 |
bias-pull-down; |
| 331 |
}; |
| 332 |
|
| 333 |
pm8921_lvs7: lvs7 { |
| 334 |
bias-pull-down; |
| 335 |
}; |
| 336 |
|
| 337 |
pm8921_ncp: ncp { |
| 338 |
regulator-min-microvolt = <1800000>; |
| 339 |
regulator-max-microvolt = <1800000>; |
| 340 |
qcom,switch-mode-frequency = <1600000>; |
| 341 |
}; |
| 342 |
}; |
| 343 |
}; |
| 344 |
|
| 345 |
/* eMMC */ |
| 346 |
&sdcc1 { |
| 347 |
status = "okay"; |
| 348 |
}; |
| 349 |
|
| 350 |
/* External micro SD card */ |
| 351 |
&sdcc3 { |
| 352 |
status = "okay"; |
| 353 |
}; |