| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
|
| 3 |
&ssbi { |
| 4 |
pm8921: pmic { |
| 5 |
compatible = "qcom,pm8921"; |
| 6 |
#interrupt-cells = <2>; |
| 7 |
interrupt-controller; |
| 8 |
#address-cells = <1>; |
| 9 |
#size-cells = <0>; |
| 10 |
|
| 11 |
pwrkey@1c { |
| 12 |
compatible = "qcom,pm8921-pwrkey"; |
| 13 |
reg = <0x1c>; |
| 14 |
interrupts-extended = <&pm8921 50 IRQ_TYPE_EDGE_RISING>, |
| 15 |
<&pm8921 51 IRQ_TYPE_EDGE_RISING>; |
| 16 |
debounce = <15625>; |
| 17 |
pull-up; |
| 18 |
}; |
| 19 |
|
| 20 |
pm8921_vibrator: vibrator@4a { |
| 21 |
compatible = "qcom,pm8921-vib"; |
| 22 |
reg = <0x4a>; |
| 23 |
status = "disabled"; |
| 24 |
}; |
| 25 |
|
| 26 |
pm8921_mpps: mpps@50 { |
| 27 |
compatible = "qcom,pm8921-mpp", |
| 28 |
"qcom,ssbi-mpp"; |
| 29 |
reg = <0x50>; |
| 30 |
gpio-controller; |
| 31 |
#gpio-cells = <2>; |
| 32 |
gpio-ranges = <&pm8921_mpps 0 0 12>; |
| 33 |
interrupt-controller; |
| 34 |
#interrupt-cells = <2>; |
| 35 |
}; |
| 36 |
|
| 37 |
rtc@11d { |
| 38 |
compatible = "qcom,pm8921-rtc"; |
| 39 |
reg = <0x11d>; |
| 40 |
interrupts-extended = <&pm8921 39 IRQ_TYPE_EDGE_RISING>; |
| 41 |
allow-set-time; |
| 42 |
}; |
| 43 |
|
| 44 |
pm8921_keypad: keypad@148 { |
| 45 |
compatible = "qcom,pm8921-keypad"; |
| 46 |
reg = <0x148>; |
| 47 |
interrupts-extended = <&pm8921 74 IRQ_TYPE_EDGE_RISING>, |
| 48 |
<&pm8921 75 IRQ_TYPE_EDGE_RISING>; |
| 49 |
debounce = <15>; |
| 50 |
scan-delay = <32>; |
| 51 |
row-hold = <91500>; |
| 52 |
status = "disabled"; |
| 53 |
}; |
| 54 |
|
| 55 |
pm8921_gpio: gpio@150 { |
| 56 |
|
| 57 |
compatible = "qcom,pm8921-gpio", |
| 58 |
"qcom,ssbi-gpio"; |
| 59 |
reg = <0x150>; |
| 60 |
interrupt-controller; |
| 61 |
#interrupt-cells = <2>; |
| 62 |
gpio-controller; |
| 63 |
gpio-ranges = <&pm8921_gpio 0 0 44>; |
| 64 |
#gpio-cells = <2>; |
| 65 |
|
| 66 |
}; |
| 67 |
|
| 68 |
pm8921_xoadc: xoadc@197 { |
| 69 |
compatible = "qcom,pm8921-adc"; |
| 70 |
reg = <0x197>; |
| 71 |
interrupts-extended = <&pm8921 78 IRQ_TYPE_EDGE_RISING>; |
| 72 |
#address-cells = <2>; |
| 73 |
#size-cells = <0>; |
| 74 |
#io-channel-cells = <2>; |
| 75 |
|
| 76 |
vcoin: adc-channel@0 { |
| 77 |
reg = <0x00 0x00>; |
| 78 |
}; |
| 79 |
|
| 80 |
vbat: adc-channel@1 { |
| 81 |
reg = <0x00 0x01>; |
| 82 |
}; |
| 83 |
|
| 84 |
dcin: adc-channel@2 { |
| 85 |
reg = <0x00 0x02>; |
| 86 |
}; |
| 87 |
|
| 88 |
vph_pwr: adc-channel@4 { |
| 89 |
reg = <0x00 0x04>; |
| 90 |
}; |
| 91 |
|
| 92 |
batt_therm: adc-channel@8 { |
| 93 |
reg = <0x00 0x08>; |
| 94 |
}; |
| 95 |
|
| 96 |
batt_id: adc-channel@9 { |
| 97 |
reg = <0x00 0x09>; |
| 98 |
}; |
| 99 |
|
| 100 |
usb_vbus: adc-channel@a { |
| 101 |
reg = <0x00 0x0a>; |
| 102 |
}; |
| 103 |
|
| 104 |
die_temp: adc-channel@b { |
| 105 |
reg = <0x00 0x0b>; |
| 106 |
}; |
| 107 |
|
| 108 |
ref_625mv: adc-channel@c { |
| 109 |
reg = <0x00 0x0c>; |
| 110 |
}; |
| 111 |
|
| 112 |
ref_1250mv: adc-channel@d { |
| 113 |
reg = <0x00 0x0d>; |
| 114 |
}; |
| 115 |
|
| 116 |
chg_temp: adc-channel@e { |
| 117 |
reg = <0x00 0x0e>; |
| 118 |
}; |
| 119 |
|
| 120 |
ref_muxoff: adc-channel@f { |
| 121 |
reg = <0x00 0x0f>; |
| 122 |
}; |
| 123 |
}; |
| 124 |
}; |
| 125 |
}; |
| 126 |
|
| 127 |
/ { |
| 128 |
/* |
| 129 |
* These channels from the ADC are simply hardware monitors. |
| 130 |
* That is why the ADC is referred to as "HKADC" - HouseKeeping |
| 131 |
* ADC. |
| 132 |
*/ |
| 133 |
iio-hwmon { |
| 134 |
compatible = "iio-hwmon"; |
| 135 |
io-channels = <&pm8921_xoadc 0x00 0x01>, /* Battery */ |
| 136 |
<&pm8921_xoadc 0x00 0x02>, /* DC in (charger) */ |
| 137 |
<&pm8921_xoadc 0x00 0x04>, /* VPH the main system voltage */ |
| 138 |
<&pm8921_xoadc 0x00 0x0b>, /* Die temperature */ |
| 139 |
<&pm8921_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */ |
| 140 |
<&pm8921_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */ |
| 141 |
<&pm8921_xoadc 0x00 0x0e>; /* Charger temperature */ |
| 142 |
}; |
| 143 |
}; |