| 1 |
// SPDX-License-Identifier: BSD-3-Clause |
| 2 |
/* |
| 3 |
* Common Board Device Tree for Microsoft MSM8x26-based Lumias |
| 4 |
* |
| 5 |
* Copyright (c) 2023, Jack Matthews <[email protected]> |
| 6 |
* Copyright (c) 2023, Ivaylo Ivanov <[email protected]> |
| 7 |
* Copyright (c) 2023, Dominik Kobinski <[email protected]> |
| 8 |
* Copyright (c) 2023, Rayyan Ansari <[email protected]> |
| 9 |
*/ |
| 10 |
|
| 11 |
/* |
| 12 |
* The .dts should first include qcom-msm8226.dtsi or msm8926.dtsi depending on |
| 13 |
* the SoC on the given device. |
| 14 |
*/ |
| 15 |
|
| 16 |
#include "pm8226.dtsi" |
| 17 |
#include <dt-bindings/input/input.h> |
| 18 |
|
| 19 |
/* |
| 20 |
* Delete all generic (msm8226.dtsi) reserved |
| 21 |
* memory mappings which are different on these devices. |
| 22 |
*/ |
| 23 |
/delete-node/ &smem_region; |
| 24 |
|
| 25 |
/ { |
| 26 |
aliases { |
| 27 |
mmc0 = &sdhc_1; /* eMMC */ |
| 28 |
mmc1 = &sdhc_2; /* microSD */ |
| 29 |
display0 = &framebuffer; |
| 30 |
}; |
| 31 |
|
| 32 |
chosen { |
| 33 |
#address-cells = <1>; |
| 34 |
#size-cells = <1>; |
| 35 |
ranges; |
| 36 |
|
| 37 |
stdout-path = "display0"; |
| 38 |
|
| 39 |
framebuffer: framebuffer@3200000 { |
| 40 |
compatible = "simple-framebuffer"; |
| 41 |
reg = <0x3200000 0x800000>; |
| 42 |
format = "a8r8g8b8"; |
| 43 |
width = <720>; |
| 44 |
height = <1280>; |
| 45 |
stride = <(720 * 4)>; |
| 46 |
|
| 47 |
clocks = <&mmcc MDSS_AHB_CLK>, |
| 48 |
<&mmcc MDSS_AXI_CLK>, |
| 49 |
<&mmcc MDSS_BYTE0_CLK>, |
| 50 |
<&mmcc MDSS_MDP_CLK>, |
| 51 |
<&mmcc MDSS_PCLK0_CLK>, |
| 52 |
<&mmcc MDSS_VSYNC_CLK>; |
| 53 |
power-domains = <&mmcc MDSS_GDSC>; |
| 54 |
}; |
| 55 |
}; |
| 56 |
|
| 57 |
gpio_keys: gpio-keys { |
| 58 |
compatible = "gpio-keys"; |
| 59 |
|
| 60 |
pinctrl-0 = <&gpio_keys_default>; |
| 61 |
pinctrl-names = "default"; |
| 62 |
|
| 63 |
label = "GPIO Buttons"; |
| 64 |
|
| 65 |
key-volume-up { |
| 66 |
label = "Volume Up"; |
| 67 |
gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; |
| 68 |
linux,code = <KEY_VOLUMEUP>; |
| 69 |
}; |
| 70 |
}; |
| 71 |
|
| 72 |
/* |
| 73 |
* This device being a WP platform has a different |
| 74 |
* memory layout than other Android based devices. |
| 75 |
* This smem memory region is directly copied from |
| 76 |
* the original UEFI firmware. |
| 77 |
*/ |
| 78 |
reserved-memory { |
| 79 |
display_reserved: framebuffer@3200000 { |
| 80 |
reg = <0x03200000 0x800000>; |
| 81 |
no-map; |
| 82 |
}; |
| 83 |
|
| 84 |
smem_region: smem@fa00000 { |
| 85 |
reg = <0x0fa00000 0x100000>; |
| 86 |
no-map; |
| 87 |
}; |
| 88 |
}; |
| 89 |
}; |
| 90 |
|
| 91 |
&blsp1_i2c2 { |
| 92 |
status = "okay"; |
| 93 |
|
| 94 |
magnetometer: magnetometer@c { |
| 95 |
compatible = "asahi-kasei,ak09911"; |
| 96 |
reg = <0x0c>; |
| 97 |
|
| 98 |
vdd-supply = <&pm8226_l15>; |
| 99 |
vid-supply = <&pm8226_l6>; |
| 100 |
}; |
| 101 |
|
| 102 |
accelerometer: accelerometer@1e { |
| 103 |
compatible = "kionix,kx022-1020"; |
| 104 |
reg = <0x1e>; |
| 105 |
|
| 106 |
interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_RISING>; |
| 107 |
|
| 108 |
vdd-supply = <&pm8226_l15>; |
| 109 |
vddio-supply = <&pm8226_l6>; |
| 110 |
|
| 111 |
mount-matrix = "1", "0", "0", |
| 112 |
"0", "-1", "0", |
| 113 |
"0", "0", "1"; |
| 114 |
}; |
| 115 |
}; |
| 116 |
|
| 117 |
&blsp1_i2c5 { |
| 118 |
status = "okay"; |
| 119 |
|
| 120 |
touchscreen: touchscreen@4b { |
| 121 |
compatible = "syna,rmi4-i2c"; |
| 122 |
reg = <0x4b>; |
| 123 |
|
| 124 |
interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; |
| 125 |
vdd-supply = <&pm8226_l15>; |
| 126 |
vio-supply = <&pm8226_l6>; |
| 127 |
|
| 128 |
pinctrl-0 = <&touchscreen_default>; |
| 129 |
pinctrl-names = "default"; |
| 130 |
|
| 131 |
#address-cells = <1>; |
| 132 |
#size-cells = <0>; |
| 133 |
|
| 134 |
rmi4-f01@1 { |
| 135 |
reg = <0x01>; |
| 136 |
syna,nosleep-mode = <1>; |
| 137 |
}; |
| 138 |
|
| 139 |
rmi4-f11@11 { |
| 140 |
reg = <0x11>; |
| 141 |
syna,sensor-type = <1>; |
| 142 |
}; |
| 143 |
}; |
| 144 |
}; |
| 145 |
|
| 146 |
&blsp1_uart3 { |
| 147 |
status = "okay"; |
| 148 |
}; |
| 149 |
|
| 150 |
&pm8226_resin { |
| 151 |
linux,code = <KEY_VOLUMEDOWN>; |
| 152 |
status = "okay"; |
| 153 |
}; |
| 154 |
|
| 155 |
&pm8226_vib { |
| 156 |
status = "okay"; |
| 157 |
}; |
| 158 |
|
| 159 |
&rpm_requests { |
| 160 |
regulators { |
| 161 |
compatible = "qcom,rpm-pm8226-regulators"; |
| 162 |
|
| 163 |
/* These values were taken from the original firmware DSDT */ |
| 164 |
pm8226_s1: s1 { |
| 165 |
regulator-min-microvolt = <1050000>; |
| 166 |
regulator-max-microvolt = <1050000>; |
| 167 |
}; |
| 168 |
|
| 169 |
pm8226_s3: s3 { |
| 170 |
regulator-min-microvolt = <1300000>; |
| 171 |
regulator-max-microvolt = <1300000>; |
| 172 |
}; |
| 173 |
|
| 174 |
pm8226_s4: s4 { |
| 175 |
regulator-min-microvolt = <1800000>; |
| 176 |
regulator-max-microvolt = <2100000>; |
| 177 |
}; |
| 178 |
|
| 179 |
pm8226_s5: s5 { |
| 180 |
regulator-min-microvolt = <1150000>; |
| 181 |
regulator-max-microvolt = <1150000>; |
| 182 |
}; |
| 183 |
|
| 184 |
pm8226_l3: l3 { |
| 185 |
regulator-min-microvolt = <750000>; |
| 186 |
regulator-max-microvolt = <1150000>; |
| 187 |
}; |
| 188 |
|
| 189 |
pm8226_l4: l4 { |
| 190 |
regulator-min-microvolt = <1200000>; |
| 191 |
regulator-max-microvolt = <1200000>; |
| 192 |
}; |
| 193 |
|
| 194 |
pm8226_l5: l5 { |
| 195 |
regulator-min-microvolt = <1200000>; |
| 196 |
regulator-max-microvolt = <1200000>; |
| 197 |
}; |
| 198 |
|
| 199 |
pm8226_l6: l6 { |
| 200 |
regulator-min-microvolt = <1800000>; |
| 201 |
regulator-max-microvolt = <1800000>; |
| 202 |
}; |
| 203 |
|
| 204 |
pm8226_l7: l7 { |
| 205 |
regulator-min-microvolt = <1850000>; |
| 206 |
regulator-max-microvolt = <1850000>; |
| 207 |
}; |
| 208 |
|
| 209 |
pm8226_l8: l8 { |
| 210 |
regulator-min-microvolt = <1800000>; |
| 211 |
regulator-max-microvolt = <1800000>; |
| 212 |
regulator-always-on; |
| 213 |
}; |
| 214 |
|
| 215 |
pm8226_l9: l9 { |
| 216 |
regulator-min-microvolt = <2050000>; |
| 217 |
regulator-max-microvolt = <2050000>; |
| 218 |
}; |
| 219 |
|
| 220 |
pm8226_l10: l10 { |
| 221 |
regulator-min-microvolt = <1800000>; |
| 222 |
regulator-max-microvolt = <1800000>; |
| 223 |
}; |
| 224 |
|
| 225 |
pm8226_l12: l12 { |
| 226 |
regulator-min-microvolt = <1800000>; |
| 227 |
regulator-max-microvolt = <1800000>; |
| 228 |
}; |
| 229 |
|
| 230 |
pm8226_l14: l14 { |
| 231 |
regulator-min-microvolt = <2750000>; |
| 232 |
regulator-max-microvolt = <2750000>; |
| 233 |
}; |
| 234 |
|
| 235 |
pm8226_l15: l15 { |
| 236 |
regulator-min-microvolt = <2850000>; |
| 237 |
regulator-max-microvolt = <2850000>; |
| 238 |
}; |
| 239 |
|
| 240 |
pm8226_l16: l16 { |
| 241 |
regulator-min-microvolt = <3000000>; |
| 242 |
regulator-max-microvolt = <3000000>; |
| 243 |
}; |
| 244 |
|
| 245 |
pm8226_l17: l17 { |
| 246 |
regulator-min-microvolt = <2950000>; |
| 247 |
regulator-max-microvolt = <2950000>; |
| 248 |
regulator-system-load = <200000>; |
| 249 |
regulator-allow-set-load; |
| 250 |
}; |
| 251 |
|
| 252 |
pm8226_l18: l18 { |
| 253 |
regulator-min-microvolt = <2950000>; |
| 254 |
regulator-max-microvolt = <2950000>; |
| 255 |
regulator-system-load = <200000>; |
| 256 |
regulator-allow-set-load; |
| 257 |
}; |
| 258 |
|
| 259 |
pm8226_l19: l19 { |
| 260 |
regulator-min-microvolt = <2850000>; |
| 261 |
regulator-max-microvolt = <2850000>; |
| 262 |
}; |
| 263 |
|
| 264 |
pm8226_l20: l20 { |
| 265 |
regulator-min-microvolt = <3075000>; |
| 266 |
regulator-max-microvolt = <3075000>; |
| 267 |
}; |
| 268 |
|
| 269 |
pm8226_l21: l21 { |
| 270 |
regulator-min-microvolt = <1850000>; |
| 271 |
regulator-max-microvolt = <2950000>; |
| 272 |
}; |
| 273 |
|
| 274 |
pm8226_l22: l22 { |
| 275 |
regulator-min-microvolt = <1800000>; |
| 276 |
regulator-max-microvolt = <1800000>; |
| 277 |
}; |
| 278 |
|
| 279 |
pm8226_l23: l23 { |
| 280 |
regulator-min-microvolt = <1800000>; |
| 281 |
regulator-max-microvolt = <1800000>; |
| 282 |
}; |
| 283 |
|
| 284 |
pm8226_l24: l24 { |
| 285 |
regulator-min-microvolt = <1300000>; |
| 286 |
regulator-max-microvolt = <1300000>; |
| 287 |
}; |
| 288 |
|
| 289 |
pm8226_l25: l25 { |
| 290 |
regulator-min-microvolt = <1775000>; |
| 291 |
regulator-max-microvolt = <2075000>; |
| 292 |
}; |
| 293 |
|
| 294 |
pm8226_l27: l27 { |
| 295 |
regulator-min-microvolt = <2050000>; |
| 296 |
regulator-max-microvolt = <2050000>; |
| 297 |
}; |
| 298 |
|
| 299 |
pm8226_l28: l28 { |
| 300 |
regulator-min-microvolt = <2000000>; |
| 301 |
regulator-max-microvolt = <3000000>; |
| 302 |
}; |
| 303 |
}; |
| 304 |
}; |
| 305 |
|
| 306 |
&sdhc_1 { |
| 307 |
vmmc-supply = <&pm8226_l17>; |
| 308 |
vqmmc-supply = <&pm8226_l6>; |
| 309 |
|
| 310 |
status = "okay"; |
| 311 |
}; |
| 312 |
|
| 313 |
&sdhc_2 { |
| 314 |
vmmc-supply = <&pm8226_l18>; |
| 315 |
vqmmc-supply = <&pm8226_l21>; |
| 316 |
|
| 317 |
status = "okay"; |
| 318 |
}; |
| 319 |
|
| 320 |
&smbb { |
| 321 |
status = "okay"; |
| 322 |
}; |
| 323 |
|
| 324 |
&usb { |
| 325 |
extcon = <&smbb>; |
| 326 |
dr_mode = "peripheral"; |
| 327 |
|
| 328 |
status = "okay"; |
| 329 |
}; |
| 330 |
|
| 331 |
&usb_hs_phy { |
| 332 |
extcon = <&smbb>; |
| 333 |
v1p8-supply = <&pm8226_l10>; |
| 334 |
v3p3-supply = <&pm8226_l20>; |
| 335 |
}; |
| 336 |
|
| 337 |
&tlmm { |
| 338 |
gpio_keys_default: gpio-keys-default-state { |
| 339 |
pins = "gpio106", "gpio107", "gpio108"; |
| 340 |
function = "gpio"; |
| 341 |
drive-strength = <2>; |
| 342 |
bias-pull-up; |
| 343 |
}; |
| 344 |
|
| 345 |
touchscreen_default: touchscreen-default-state { |
| 346 |
irq-pins { |
| 347 |
pins = "gpio17"; |
| 348 |
function = "gpio"; |
| 349 |
drive-strength = <8>; |
| 350 |
bias-pull-up; |
| 351 |
}; |
| 352 |
|
| 353 |
reset-pins { |
| 354 |
pins = "gpio16"; |
| 355 |
function = "gpio"; |
| 356 |
drive-strength = <8>; |
| 357 |
bias-disable; |
| 358 |
output-high; |
| 359 |
}; |
| 360 |
}; |
| 361 |
}; |