| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
#include "qcom-ipq8064.dtsi" |
| 3 |
#include <dt-bindings/input/input.h> |
| 4 |
#include <dt-bindings/leds/common.h> |
| 5 |
|
| 6 |
/ { |
| 7 |
model = "MikroTik RB3011UiAS-RM"; |
| 8 |
compatible = "mikrotik,rb3011", "qcom,ipq8064"; |
| 9 |
|
| 10 |
aliases { |
| 11 |
serial0 = &gsbi7_serial; |
| 12 |
ethernet0 = &gmac0; |
| 13 |
ethernet1 = &gmac3; |
| 14 |
mdio-gpio0 = &mdio0; |
| 15 |
mdio-gpio1 = &mdio1; |
| 16 |
}; |
| 17 |
|
| 18 |
chosen { |
| 19 |
bootargs = "loglevel=8 console=ttyMSM0,115200"; |
| 20 |
stdout-path = "serial0:115200n8"; |
| 21 |
}; |
| 22 |
|
| 23 |
gpio-keys { |
| 24 |
compatible = "gpio-keys"; |
| 25 |
pinctrl-0 = <&buttons_pins>; |
| 26 |
pinctrl-names = "default"; |
| 27 |
|
| 28 |
button { |
| 29 |
label = "reset"; |
| 30 |
linux,code = <KEY_RESTART>; |
| 31 |
gpios = <&qcom_pinmux 66 GPIO_ACTIVE_LOW>; |
| 32 |
linux,input-type = <1>; |
| 33 |
debounce-interval = <60>; |
| 34 |
}; |
| 35 |
}; |
| 36 |
|
| 37 |
leds { |
| 38 |
compatible = "gpio-leds"; |
| 39 |
pinctrl-0 = <&leds_pins>; |
| 40 |
pinctrl-names = "default"; |
| 41 |
|
| 42 |
led-0 { |
| 43 |
label = "rb3011:green:user"; |
| 44 |
color = <LED_COLOR_ID_GREEN>; |
| 45 |
gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>; |
| 46 |
default-state = "off"; |
| 47 |
}; |
| 48 |
}; |
| 49 |
|
| 50 |
memory@42000000 { |
| 51 |
reg = <0x42000000 0x3e000000>; |
| 52 |
device_type = "memory"; |
| 53 |
}; |
| 54 |
|
| 55 |
mdio0: mdio-0 { |
| 56 |
status = "okay"; |
| 57 |
compatible = "virtual,mdio-gpio"; |
| 58 |
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, |
| 59 |
<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>; |
| 60 |
#address-cells = <1>; |
| 61 |
#size-cells = <0>; |
| 62 |
|
| 63 |
pinctrl-0 = <&mdio0_pins>; |
| 64 |
pinctrl-names = "default"; |
| 65 |
|
| 66 |
switch0: switch@10 { |
| 67 |
compatible = "qca,qca8337"; |
| 68 |
|
| 69 |
dsa,member = <0 0>; |
| 70 |
|
| 71 |
pinctrl-0 = <&sw0_reset_pin>; |
| 72 |
pinctrl-names = "default"; |
| 73 |
|
| 74 |
reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>; |
| 75 |
reg = <0x10>; |
| 76 |
|
| 77 |
ports { |
| 78 |
#address-cells = <1>; |
| 79 |
#size-cells = <0>; |
| 80 |
|
| 81 |
switch0cpu: port@0 { |
| 82 |
reg = <0>; |
| 83 |
label = "cpu"; |
| 84 |
ethernet = <&gmac0>; |
| 85 |
phy-mode = "rgmii-id"; |
| 86 |
fixed-link { |
| 87 |
speed = <1000>; |
| 88 |
full-duplex; |
| 89 |
}; |
| 90 |
}; |
| 91 |
|
| 92 |
port@1 { |
| 93 |
reg = <1>; |
| 94 |
label = "sw1"; |
| 95 |
|
| 96 |
leds { |
| 97 |
#address-cells = <1>; |
| 98 |
#size-cells = <0>; |
| 99 |
|
| 100 |
led@0 { |
| 101 |
reg = <0>; |
| 102 |
color = <LED_COLOR_ID_GREEN>; |
| 103 |
function = LED_FUNCTION_LAN; |
| 104 |
default-state = "keep"; |
| 105 |
}; |
| 106 |
}; |
| 107 |
}; |
| 108 |
|
| 109 |
port@2 { |
| 110 |
reg = <2>; |
| 111 |
label = "sw2"; |
| 112 |
|
| 113 |
leds { |
| 114 |
#address-cells = <1>; |
| 115 |
#size-cells = <0>; |
| 116 |
|
| 117 |
led@0 { |
| 118 |
reg = <0>; |
| 119 |
color = <LED_COLOR_ID_GREEN>; |
| 120 |
function = LED_FUNCTION_LAN; |
| 121 |
default-state = "keep"; |
| 122 |
}; |
| 123 |
}; |
| 124 |
}; |
| 125 |
|
| 126 |
port@3 { |
| 127 |
reg = <3>; |
| 128 |
label = "sw3"; |
| 129 |
|
| 130 |
leds { |
| 131 |
#address-cells = <1>; |
| 132 |
#size-cells = <0>; |
| 133 |
|
| 134 |
led@0 { |
| 135 |
reg = <0>; |
| 136 |
color = <LED_COLOR_ID_GREEN>; |
| 137 |
function = LED_FUNCTION_LAN; |
| 138 |
default-state = "keep"; |
| 139 |
}; |
| 140 |
}; |
| 141 |
}; |
| 142 |
|
| 143 |
port@4 { |
| 144 |
reg = <4>; |
| 145 |
label = "sw4"; |
| 146 |
|
| 147 |
leds { |
| 148 |
#address-cells = <1>; |
| 149 |
#size-cells = <0>; |
| 150 |
|
| 151 |
led@0 { |
| 152 |
reg = <0>; |
| 153 |
color = <LED_COLOR_ID_GREEN>; |
| 154 |
function = LED_FUNCTION_LAN; |
| 155 |
default-state = "keep"; |
| 156 |
}; |
| 157 |
}; |
| 158 |
}; |
| 159 |
|
| 160 |
port@5 { |
| 161 |
reg = <5>; |
| 162 |
label = "sw5"; |
| 163 |
|
| 164 |
leds { |
| 165 |
#address-cells = <1>; |
| 166 |
#size-cells = <0>; |
| 167 |
|
| 168 |
led@0 { |
| 169 |
reg = <0>; |
| 170 |
color = <LED_COLOR_ID_GREEN>; |
| 171 |
function = LED_FUNCTION_LAN; |
| 172 |
default-state = "keep"; |
| 173 |
}; |
| 174 |
}; |
| 175 |
}; |
| 176 |
}; |
| 177 |
}; |
| 178 |
}; |
| 179 |
|
| 180 |
mdio1: mdio-1 { |
| 181 |
status = "okay"; |
| 182 |
compatible = "virtual,mdio-gpio"; |
| 183 |
gpios = <&qcom_pinmux 11 GPIO_ACTIVE_HIGH>, |
| 184 |
<&qcom_pinmux 10 GPIO_ACTIVE_HIGH>; |
| 185 |
#address-cells = <1>; |
| 186 |
#size-cells = <0>; |
| 187 |
|
| 188 |
pinctrl-0 = <&mdio1_pins>; |
| 189 |
pinctrl-names = "default"; |
| 190 |
|
| 191 |
switch1: switch@14 { |
| 192 |
compatible = "qca,qca8337"; |
| 193 |
|
| 194 |
dsa,member = <1 0>; |
| 195 |
|
| 196 |
pinctrl-0 = <&sw1_reset_pin>; |
| 197 |
pinctrl-names = "default"; |
| 198 |
|
| 199 |
reset-gpios = <&qcom_pinmux 17 GPIO_ACTIVE_LOW>; |
| 200 |
reg = <0x10>; |
| 201 |
|
| 202 |
ports { |
| 203 |
#address-cells = <1>; |
| 204 |
#size-cells = <0>; |
| 205 |
|
| 206 |
switch1cpu: port@0 { |
| 207 |
reg = <0>; |
| 208 |
label = "cpu"; |
| 209 |
ethernet = <&gmac3>; |
| 210 |
phy-mode = "sgmii"; |
| 211 |
fixed-link { |
| 212 |
speed = <1000>; |
| 213 |
full-duplex; |
| 214 |
}; |
| 215 |
}; |
| 216 |
|
| 217 |
port@1 { |
| 218 |
reg = <1>; |
| 219 |
label = "sw6"; |
| 220 |
|
| 221 |
leds { |
| 222 |
#address-cells = <1>; |
| 223 |
#size-cells = <0>; |
| 224 |
|
| 225 |
led@0 { |
| 226 |
reg = <0>; |
| 227 |
color = <LED_COLOR_ID_GREEN>; |
| 228 |
function = LED_FUNCTION_LAN; |
| 229 |
default-state = "keep"; |
| 230 |
}; |
| 231 |
}; |
| 232 |
}; |
| 233 |
|
| 234 |
port@2 { |
| 235 |
reg = <2>; |
| 236 |
label = "sw7"; |
| 237 |
|
| 238 |
leds { |
| 239 |
#address-cells = <1>; |
| 240 |
#size-cells = <0>; |
| 241 |
|
| 242 |
led@0 { |
| 243 |
reg = <0>; |
| 244 |
color = <LED_COLOR_ID_GREEN>; |
| 245 |
function = LED_FUNCTION_LAN; |
| 246 |
default-state = "keep"; |
| 247 |
}; |
| 248 |
}; |
| 249 |
}; |
| 250 |
|
| 251 |
port@3 { |
| 252 |
reg = <3>; |
| 253 |
label = "sw8"; |
| 254 |
|
| 255 |
leds { |
| 256 |
#address-cells = <1>; |
| 257 |
#size-cells = <0>; |
| 258 |
|
| 259 |
led@0 { |
| 260 |
reg = <0>; |
| 261 |
color = <LED_COLOR_ID_GREEN>; |
| 262 |
function = LED_FUNCTION_LAN; |
| 263 |
default-state = "keep"; |
| 264 |
}; |
| 265 |
}; |
| 266 |
}; |
| 267 |
|
| 268 |
port@4 { |
| 269 |
reg = <4>; |
| 270 |
label = "sw9"; |
| 271 |
|
| 272 |
leds { |
| 273 |
#address-cells = <1>; |
| 274 |
#size-cells = <0>; |
| 275 |
|
| 276 |
led@0 { |
| 277 |
reg = <0>; |
| 278 |
color = <LED_COLOR_ID_GREEN>; |
| 279 |
function = LED_FUNCTION_LAN; |
| 280 |
default-state = "keep"; |
| 281 |
}; |
| 282 |
}; |
| 283 |
}; |
| 284 |
|
| 285 |
port@5 { |
| 286 |
reg = <5>; |
| 287 |
label = "sw10"; |
| 288 |
|
| 289 |
leds { |
| 290 |
#address-cells = <1>; |
| 291 |
#size-cells = <0>; |
| 292 |
|
| 293 |
led@0 { |
| 294 |
reg = <0>; |
| 295 |
color = <LED_COLOR_ID_GREEN>; |
| 296 |
function = LED_FUNCTION_LAN; |
| 297 |
default-state = "keep"; |
| 298 |
}; |
| 299 |
}; |
| 300 |
}; |
| 301 |
}; |
| 302 |
}; |
| 303 |
}; |
| 304 |
|
| 305 |
soc { |
| 306 |
gsbi5: gsbi@1a200000 { |
| 307 |
qcom,mode = <GSBI_PROT_SPI>; |
| 308 |
status = "okay"; |
| 309 |
|
| 310 |
spi4: spi@1a280000 { |
| 311 |
status = "okay"; |
| 312 |
|
| 313 |
pinctrl-0 = <&spi_pins>; |
| 314 |
pinctrl-names = "default"; |
| 315 |
|
| 316 |
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; |
| 317 |
|
| 318 |
norflash: flash@0 { |
| 319 |
compatible = "jedec,spi-nor"; |
| 320 |
#address-cells = <1>; |
| 321 |
#size-cells = <1>; |
| 322 |
spi-max-frequency = <50000000>; |
| 323 |
reg = <0>; |
| 324 |
|
| 325 |
partition@0 { |
| 326 |
label = "RouterBoot"; |
| 327 |
reg = <0x0 0x40000>; |
| 328 |
}; |
| 329 |
}; |
| 330 |
}; |
| 331 |
}; |
| 332 |
}; |
| 333 |
}; |
| 334 |
|
| 335 |
&adm_dma { |
| 336 |
status = "okay"; |
| 337 |
}; |
| 338 |
|
| 339 |
&gmac0 { |
| 340 |
status = "okay"; |
| 341 |
|
| 342 |
phy-mode = "rgmii"; |
| 343 |
qcom,id = <0>; |
| 344 |
phy-handle = <&switch0cpu>; |
| 345 |
|
| 346 |
fixed-link { |
| 347 |
speed = <1000>; |
| 348 |
full-duplex; |
| 349 |
}; |
| 350 |
}; |
| 351 |
|
| 352 |
&gmac3 { |
| 353 |
status = "okay"; |
| 354 |
|
| 355 |
phy-mode = "sgmii"; |
| 356 |
qcom,id = <3>; |
| 357 |
phy-handle = <&switch1cpu>; |
| 358 |
|
| 359 |
fixed-link { |
| 360 |
speed = <1000>; |
| 361 |
full-duplex; |
| 362 |
}; |
| 363 |
}; |
| 364 |
|
| 365 |
&gsbi7 { |
| 366 |
status = "okay"; |
| 367 |
qcom,mode = <GSBI_PROT_I2C_UART>; |
| 368 |
}; |
| 369 |
|
| 370 |
&gsbi7_serial { |
| 371 |
status = "okay"; |
| 372 |
}; |
| 373 |
|
| 374 |
&hs_phy_1 { |
| 375 |
status = "okay"; |
| 376 |
}; |
| 377 |
|
| 378 |
&nand { |
| 379 |
status = "okay"; |
| 380 |
|
| 381 |
nand@0 { |
| 382 |
reg = <0>; |
| 383 |
|
| 384 |
nand-ecc-strength = <4>; |
| 385 |
nand-bus-width = <8>; |
| 386 |
nand-ecc-step-size = <512>; |
| 387 |
|
| 388 |
partitions { |
| 389 |
compatible = "fixed-partitions"; |
| 390 |
#address-cells = <1>; |
| 391 |
#size-cells = <1>; |
| 392 |
|
| 393 |
boot@0 { |
| 394 |
label = "RouterBoard NAND 1 Boot"; |
| 395 |
reg = <0x0000000 0x0800000>; |
| 396 |
}; |
| 397 |
|
| 398 |
main@800000 { |
| 399 |
label = "RouterBoard NAND 1 Main"; |
| 400 |
reg = <0x0800000 0x7800000>; |
| 401 |
}; |
| 402 |
}; |
| 403 |
}; |
| 404 |
}; |
| 405 |
|
| 406 |
&qcom_pinmux { |
| 407 |
buttons_pins: buttons-state { |
| 408 |
pins = "gpio66"; |
| 409 |
function = "gpio"; |
| 410 |
drive-strength = <16>; |
| 411 |
bias-disable; |
| 412 |
}; |
| 413 |
|
| 414 |
leds_pins: leds-state { |
| 415 |
pins = "gpio33"; |
| 416 |
function = "gpio"; |
| 417 |
drive-strength = <16>; |
| 418 |
bias-disable; |
| 419 |
}; |
| 420 |
|
| 421 |
mdio1_pins: mdio1-state { |
| 422 |
pins = "gpio10", "gpio11"; |
| 423 |
function = "gpio"; |
| 424 |
drive-strength = <8>; |
| 425 |
bias-disable; |
| 426 |
}; |
| 427 |
|
| 428 |
sw0_reset_pin: sw0-reset-state { |
| 429 |
pins = "gpio16"; |
| 430 |
drive-strength = <16>; |
| 431 |
function = "gpio"; |
| 432 |
bias-disable; |
| 433 |
input-disable; |
| 434 |
}; |
| 435 |
|
| 436 |
sw1_reset_pin: sw1-reset-state { |
| 437 |
pins = "gpio17"; |
| 438 |
drive-strength = <16>; |
| 439 |
function = "gpio"; |
| 440 |
bias-disable; |
| 441 |
input-disable; |
| 442 |
}; |
| 443 |
|
| 444 |
usb1_pwr_en_pins: usb1-pwr-en-state { |
| 445 |
pins = "gpio4"; |
| 446 |
function = "gpio"; |
| 447 |
drive-strength = <16>; |
| 448 |
bias-disable; |
| 449 |
output-high; |
| 450 |
}; |
| 451 |
}; |
| 452 |
|
| 453 |
&ss_phy_1 { |
| 454 |
status = "okay"; |
| 455 |
}; |
| 456 |
|
| 457 |
&usb3_1 { |
| 458 |
pinctrl-0 = <&usb1_pwr_en_pins>; |
| 459 |
pinctrl-names = "default"; |
| 460 |
|
| 461 |
status = "okay"; |
| 462 |
}; |