| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/dts-v1/; |
| 3 |
|
| 4 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 5 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 6 |
#include <dt-bindings/clock/qcom,gcc-msm8660.h> |
| 7 |
#include <dt-bindings/soc/qcom,gsbi.h> |
| 8 |
|
| 9 |
/ { |
| 10 |
#address-cells = <1>; |
| 11 |
#size-cells = <1>; |
| 12 |
model = "Qualcomm MSM8660"; |
| 13 |
compatible = "qcom,msm8660"; |
| 14 |
interrupt-parent = <&intc>; |
| 15 |
|
| 16 |
cpus { |
| 17 |
#address-cells = <1>; |
| 18 |
#size-cells = <0>; |
| 19 |
|
| 20 |
cpu@0 { |
| 21 |
compatible = "qcom,scorpion"; |
| 22 |
enable-method = "qcom,gcc-msm8660"; |
| 23 |
device_type = "cpu"; |
| 24 |
reg = <0>; |
| 25 |
next-level-cache = <&l2>; |
| 26 |
}; |
| 27 |
|
| 28 |
cpu@1 { |
| 29 |
compatible = "qcom,scorpion"; |
| 30 |
enable-method = "qcom,gcc-msm8660"; |
| 31 |
device_type = "cpu"; |
| 32 |
reg = <1>; |
| 33 |
next-level-cache = <&l2>; |
| 34 |
}; |
| 35 |
|
| 36 |
l2: l2-cache { |
| 37 |
compatible = "cache"; |
| 38 |
cache-level = <2>; |
| 39 |
cache-unified; |
| 40 |
}; |
| 41 |
}; |
| 42 |
|
| 43 |
memory { |
| 44 |
device_type = "memory"; |
| 45 |
reg = <0x0 0x0>; |
| 46 |
}; |
| 47 |
|
| 48 |
cpu-pmu { |
| 49 |
compatible = "qcom,scorpion-mp-pmu"; |
| 50 |
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; |
| 51 |
}; |
| 52 |
|
| 53 |
clocks { |
| 54 |
cxo_board: cxo-board-clk { |
| 55 |
compatible = "fixed-clock"; |
| 56 |
#clock-cells = <0>; |
| 57 |
clock-frequency = <19200000>; |
| 58 |
clock-output-names = "cxo_board"; |
| 59 |
}; |
| 60 |
|
| 61 |
pxo_board: pxo-board-clk { |
| 62 |
compatible = "fixed-clock"; |
| 63 |
#clock-cells = <0>; |
| 64 |
clock-frequency = <27000000>; |
| 65 |
clock-output-names = "pxo_board"; |
| 66 |
}; |
| 67 |
|
| 68 |
sleep-clk { |
| 69 |
compatible = "fixed-clock"; |
| 70 |
#clock-cells = <0>; |
| 71 |
clock-frequency = <32768>; |
| 72 |
clock-output-names = "sleep_clk"; |
| 73 |
}; |
| 74 |
}; |
| 75 |
|
| 76 |
soc: soc { |
| 77 |
#address-cells = <1>; |
| 78 |
#size-cells = <1>; |
| 79 |
ranges; |
| 80 |
compatible = "simple-bus"; |
| 81 |
|
| 82 |
intc: interrupt-controller@2080000 { |
| 83 |
compatible = "qcom,msm-8660-qgic"; |
| 84 |
interrupt-controller; |
| 85 |
#interrupt-cells = <3>; |
| 86 |
reg = < 0x02080000 0x1000 >, |
| 87 |
< 0x02081000 0x1000 >; |
| 88 |
}; |
| 89 |
|
| 90 |
timer@2000000 { |
| 91 |
compatible = "qcom,scss-timer", "qcom,msm-timer"; |
| 92 |
interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>, |
| 93 |
<GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>, |
| 94 |
<GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>; |
| 95 |
reg = <0x02000000 0x100>; |
| 96 |
clock-frequency = <27000000>; |
| 97 |
cpu-offset = <0x40000>; |
| 98 |
}; |
| 99 |
|
| 100 |
tlmm: pinctrl@800000 { |
| 101 |
compatible = "qcom,msm8660-pinctrl"; |
| 102 |
reg = <0x800000 0x4000>; |
| 103 |
|
| 104 |
gpio-controller; |
| 105 |
gpio-ranges = <&tlmm 0 0 173>; |
| 106 |
#gpio-cells = <2>; |
| 107 |
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| 108 |
interrupt-controller; |
| 109 |
#interrupt-cells = <2>; |
| 110 |
|
| 111 |
}; |
| 112 |
|
| 113 |
gcc: clock-controller@900000 { |
| 114 |
compatible = "qcom,gcc-msm8660"; |
| 115 |
#clock-cells = <1>; |
| 116 |
#reset-cells = <1>; |
| 117 |
reg = <0x900000 0x4000>; |
| 118 |
clocks = <&pxo_board>, <&cxo_board>; |
| 119 |
clock-names = "pxo", "cxo"; |
| 120 |
}; |
| 121 |
|
| 122 |
gsbi1: gsbi@16000000 { |
| 123 |
compatible = "qcom,gsbi-v1.0.0"; |
| 124 |
cell-index = <12>; |
| 125 |
reg = <0x16000000 0x100>; |
| 126 |
clocks = <&gcc GSBI1_H_CLK>; |
| 127 |
clock-names = "iface"; |
| 128 |
#address-cells = <1>; |
| 129 |
#size-cells = <1>; |
| 130 |
ranges; |
| 131 |
|
| 132 |
syscon-tcsr = <&tcsr>; |
| 133 |
|
| 134 |
status = "disabled"; |
| 135 |
|
| 136 |
gsbi1_spi: spi@16080000 { |
| 137 |
compatible = "qcom,spi-qup-v1.1.1"; |
| 138 |
reg = <0x16080000 0x1000>; |
| 139 |
interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; |
| 140 |
clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; |
| 141 |
clock-names = "core", "iface"; |
| 142 |
#address-cells = <1>; |
| 143 |
#size-cells = <0>; |
| 144 |
status = "disabled"; |
| 145 |
}; |
| 146 |
}; |
| 147 |
|
| 148 |
gsbi3: gsbi@16200000 { |
| 149 |
compatible = "qcom,gsbi-v1.0.0"; |
| 150 |
cell-index = <12>; |
| 151 |
reg = <0x16200000 0x100>; |
| 152 |
clocks = <&gcc GSBI3_H_CLK>; |
| 153 |
clock-names = "iface"; |
| 154 |
#address-cells = <1>; |
| 155 |
#size-cells = <1>; |
| 156 |
ranges; |
| 157 |
|
| 158 |
syscon-tcsr = <&tcsr>; |
| 159 |
status = "disabled"; |
| 160 |
|
| 161 |
gsbi3_i2c: i2c@16280000 { |
| 162 |
compatible = "qcom,i2c-qup-v1.1.1"; |
| 163 |
reg = <0x16280000 0x1000>; |
| 164 |
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; |
| 165 |
clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>; |
| 166 |
clock-names = "core", "iface"; |
| 167 |
#address-cells = <1>; |
| 168 |
#size-cells = <0>; |
| 169 |
status = "disabled"; |
| 170 |
}; |
| 171 |
}; |
| 172 |
|
| 173 |
gsbi6: gsbi@16500000 { |
| 174 |
compatible = "qcom,gsbi-v1.0.0"; |
| 175 |
cell-index = <12>; |
| 176 |
reg = <0x16500000 0x100>; |
| 177 |
clocks = <&gcc GSBI6_H_CLK>; |
| 178 |
clock-names = "iface"; |
| 179 |
#address-cells = <1>; |
| 180 |
#size-cells = <1>; |
| 181 |
ranges; |
| 182 |
status = "disabled"; |
| 183 |
|
| 184 |
syscon-tcsr = <&tcsr>; |
| 185 |
|
| 186 |
gsbi6_serial: serial@16540000 { |
| 187 |
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; |
| 188 |
reg = <0x16540000 0x1000>, |
| 189 |
<0x16500000 0x1000>; |
| 190 |
interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; |
| 191 |
clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>; |
| 192 |
clock-names = "core", "iface"; |
| 193 |
status = "disabled"; |
| 194 |
}; |
| 195 |
|
| 196 |
gsbi6_i2c: i2c@16580000 { |
| 197 |
compatible = "qcom,i2c-qup-v1.1.1"; |
| 198 |
reg = <0x16580000 0x1000>; |
| 199 |
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; |
| 200 |
clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>; |
| 201 |
clock-names = "core", "iface"; |
| 202 |
#address-cells = <1>; |
| 203 |
#size-cells = <0>; |
| 204 |
status = "disabled"; |
| 205 |
}; |
| 206 |
}; |
| 207 |
|
| 208 |
gsbi7: gsbi@16600000 { |
| 209 |
compatible = "qcom,gsbi-v1.0.0"; |
| 210 |
cell-index = <12>; |
| 211 |
reg = <0x16600000 0x100>; |
| 212 |
clocks = <&gcc GSBI7_H_CLK>; |
| 213 |
clock-names = "iface"; |
| 214 |
#address-cells = <1>; |
| 215 |
#size-cells = <1>; |
| 216 |
ranges; |
| 217 |
status = "disabled"; |
| 218 |
|
| 219 |
syscon-tcsr = <&tcsr>; |
| 220 |
|
| 221 |
gsbi7_serial: serial@16640000 { |
| 222 |
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; |
| 223 |
reg = <0x16640000 0x1000>, |
| 224 |
<0x16600000 0x1000>; |
| 225 |
interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; |
| 226 |
clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>; |
| 227 |
clock-names = "core", "iface"; |
| 228 |
status = "disabled"; |
| 229 |
}; |
| 230 |
|
| 231 |
gsbi7_i2c: i2c@16680000 { |
| 232 |
compatible = "qcom,i2c-qup-v1.1.1"; |
| 233 |
reg = <0x16680000 0x1000>; |
| 234 |
interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; |
| 235 |
clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>; |
| 236 |
clock-names = "core", "iface"; |
| 237 |
#address-cells = <1>; |
| 238 |
#size-cells = <0>; |
| 239 |
status = "disabled"; |
| 240 |
}; |
| 241 |
}; |
| 242 |
|
| 243 |
gsbi8: gsbi@19800000 { |
| 244 |
compatible = "qcom,gsbi-v1.0.0"; |
| 245 |
cell-index = <12>; |
| 246 |
reg = <0x19800000 0x100>; |
| 247 |
clocks = <&gcc GSBI8_H_CLK>; |
| 248 |
clock-names = "iface"; |
| 249 |
#address-cells = <1>; |
| 250 |
#size-cells = <1>; |
| 251 |
ranges; |
| 252 |
|
| 253 |
syscon-tcsr = <&tcsr>; |
| 254 |
status = "disabled"; |
| 255 |
|
| 256 |
gsbi8_i2c: i2c@19880000 { |
| 257 |
compatible = "qcom,i2c-qup-v1.1.1"; |
| 258 |
reg = <0x19880000 0x1000>; |
| 259 |
interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; |
| 260 |
clocks = <&gcc GSBI8_QUP_CLK>, <&gcc GSBI8_H_CLK>; |
| 261 |
clock-names = "core", "iface"; |
| 262 |
#address-cells = <1>; |
| 263 |
#size-cells = <0>; |
| 264 |
status = "disabled"; |
| 265 |
}; |
| 266 |
}; |
| 267 |
|
| 268 |
gsbi12: gsbi@19c00000 { |
| 269 |
compatible = "qcom,gsbi-v1.0.0"; |
| 270 |
cell-index = <12>; |
| 271 |
reg = <0x19c00000 0x100>; |
| 272 |
clocks = <&gcc GSBI12_H_CLK>; |
| 273 |
clock-names = "iface"; |
| 274 |
#address-cells = <1>; |
| 275 |
#size-cells = <1>; |
| 276 |
ranges; |
| 277 |
|
| 278 |
syscon-tcsr = <&tcsr>; |
| 279 |
|
| 280 |
gsbi12_serial: serial@19c40000 { |
| 281 |
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; |
| 282 |
reg = <0x19c40000 0x1000>, |
| 283 |
<0x19c00000 0x1000>; |
| 284 |
interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; |
| 285 |
clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>; |
| 286 |
clock-names = "core", "iface"; |
| 287 |
status = "disabled"; |
| 288 |
}; |
| 289 |
|
| 290 |
gsbi12_i2c: i2c@19c80000 { |
| 291 |
compatible = "qcom,i2c-qup-v1.1.1"; |
| 292 |
reg = <0x19c80000 0x1000>; |
| 293 |
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; |
| 294 |
clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>; |
| 295 |
clock-names = "core", "iface"; |
| 296 |
#address-cells = <1>; |
| 297 |
#size-cells = <0>; |
| 298 |
status = "disabled"; |
| 299 |
}; |
| 300 |
}; |
| 301 |
|
| 302 |
ebi2: external-bus@1a100000 { |
| 303 |
compatible = "qcom,msm8660-ebi2"; |
| 304 |
#address-cells = <2>; |
| 305 |
#size-cells = <1>; |
| 306 |
ranges = <0 0x0 0x1a800000 0x00800000>, |
| 307 |
<1 0x0 0x1b000000 0x00800000>, |
| 308 |
<2 0x0 0x1b800000 0x00800000>, |
| 309 |
<3 0x0 0x1d000000 0x08000000>, |
| 310 |
<4 0x0 0x1c800000 0x00800000>, |
| 311 |
<5 0x0 0x1c000000 0x00800000>; |
| 312 |
reg = <0x1a100000 0x1000>, <0x1a110000 0x1000>; |
| 313 |
reg-names = "ebi2", "xmem"; |
| 314 |
clocks = <&gcc EBI2_2X_CLK>, <&gcc EBI2_CLK>; |
| 315 |
clock-names = "ebi2x", "ebi2"; |
| 316 |
status = "disabled"; |
| 317 |
}; |
| 318 |
|
| 319 |
ssbi: ssbi@500000 { |
| 320 |
compatible = "qcom,ssbi"; |
| 321 |
reg = <0x500000 0x1000>; |
| 322 |
qcom,controller-type = "pmic-arbiter"; |
| 323 |
}; |
| 324 |
|
| 325 |
l2cc: clock-controller@2082000 { |
| 326 |
compatible = "qcom,kpss-gcc-msm8660", "qcom,kpss-gcc", "syscon"; |
| 327 |
reg = <0x02082000 0x1000>; |
| 328 |
}; |
| 329 |
|
| 330 |
rpm: rpm@104000 { |
| 331 |
compatible = "qcom,rpm-msm8660"; |
| 332 |
reg = <0x00104000 0x1000>; |
| 333 |
qcom,ipc = <&l2cc 0x8 2>; |
| 334 |
|
| 335 |
interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>, |
| 336 |
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, |
| 337 |
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; |
| 338 |
interrupt-names = "ack", "err", "wakeup"; |
| 339 |
clocks = <&gcc RPM_MSG_RAM_H_CLK>; |
| 340 |
clock-names = "ram"; |
| 341 |
|
| 342 |
rpmcc: clock-controller { |
| 343 |
compatible = "qcom,rpmcc-msm8660", "qcom,rpmcc"; |
| 344 |
#clock-cells = <1>; |
| 345 |
clocks = <&pxo_board>; |
| 346 |
clock-names = "pxo"; |
| 347 |
}; |
| 348 |
}; |
| 349 |
|
| 350 |
amba { |
| 351 |
compatible = "simple-bus"; |
| 352 |
#address-cells = <1>; |
| 353 |
#size-cells = <1>; |
| 354 |
ranges; |
| 355 |
sdcc1: mmc@12400000 { |
| 356 |
status = "disabled"; |
| 357 |
compatible = "arm,pl18x", "arm,primecell"; |
| 358 |
arm,primecell-periphid = <0x00051180>; |
| 359 |
reg = <0x12400000 0x8000>; |
| 360 |
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; |
| 361 |
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; |
| 362 |
clock-names = "mclk", "apb_pclk"; |
| 363 |
bus-width = <8>; |
| 364 |
max-frequency = <48000000>; |
| 365 |
non-removable; |
| 366 |
cap-sd-highspeed; |
| 367 |
cap-mmc-highspeed; |
| 368 |
}; |
| 369 |
|
| 370 |
sdcc2: mmc@12140000 { |
| 371 |
status = "disabled"; |
| 372 |
compatible = "arm,pl18x", "arm,primecell"; |
| 373 |
arm,primecell-periphid = <0x00051180>; |
| 374 |
reg = <0x12140000 0x8000>; |
| 375 |
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; |
| 376 |
clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>; |
| 377 |
clock-names = "mclk", "apb_pclk"; |
| 378 |
bus-width = <8>; |
| 379 |
max-frequency = <48000000>; |
| 380 |
cap-sd-highspeed; |
| 381 |
cap-mmc-highspeed; |
| 382 |
}; |
| 383 |
|
| 384 |
sdcc3: mmc@12180000 { |
| 385 |
compatible = "arm,pl18x", "arm,primecell"; |
| 386 |
arm,primecell-periphid = <0x00051180>; |
| 387 |
status = "disabled"; |
| 388 |
reg = <0x12180000 0x8000>; |
| 389 |
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; |
| 390 |
clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; |
| 391 |
clock-names = "mclk", "apb_pclk"; |
| 392 |
bus-width = <4>; |
| 393 |
cap-sd-highspeed; |
| 394 |
cap-mmc-highspeed; |
| 395 |
max-frequency = <48000000>; |
| 396 |
no-1-8-v; |
| 397 |
}; |
| 398 |
|
| 399 |
sdcc4: mmc@121c0000 { |
| 400 |
compatible = "arm,pl18x", "arm,primecell"; |
| 401 |
arm,primecell-periphid = <0x00051180>; |
| 402 |
status = "disabled"; |
| 403 |
reg = <0x121c0000 0x8000>; |
| 404 |
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; |
| 405 |
clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>; |
| 406 |
clock-names = "mclk", "apb_pclk"; |
| 407 |
bus-width = <4>; |
| 408 |
max-frequency = <48000000>; |
| 409 |
cap-sd-highspeed; |
| 410 |
cap-mmc-highspeed; |
| 411 |
}; |
| 412 |
|
| 413 |
sdcc5: mmc@12200000 { |
| 414 |
compatible = "arm,pl18x", "arm,primecell"; |
| 415 |
arm,primecell-periphid = <0x00051180>; |
| 416 |
status = "disabled"; |
| 417 |
reg = <0x12200000 0x8000>; |
| 418 |
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; |
| 419 |
clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>; |
| 420 |
clock-names = "mclk", "apb_pclk"; |
| 421 |
bus-width = <4>; |
| 422 |
cap-sd-highspeed; |
| 423 |
cap-mmc-highspeed; |
| 424 |
max-frequency = <48000000>; |
| 425 |
}; |
| 426 |
}; |
| 427 |
|
| 428 |
tcsr: syscon@1a400000 { |
| 429 |
compatible = "qcom,tcsr-msm8660", "syscon"; |
| 430 |
reg = <0x1a400000 0x100>; |
| 431 |
}; |
| 432 |
}; |
| 433 |
|
| 434 |
}; |