Debian Codegraph @

arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi

raw
1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * Copyright (c) 2022, Matti Lehtimäki <[email protected]>
4 */
5
6 /*
7 * The .dts should first include qcom-msm8226.dtsi or msm8926.dtsi depending on
8 * the SoC on the given device.
9 */
10
11 #include <dt-bindings/input/input.h>
12 #include "pm8226.dtsi"
13
14 /delete-node/ &adsp_region;
15 /delete-node/ &mba_region;
16 /delete-node/ &mpss_region;
17 /delete-node/ &smem_region;
18
19 / {
20 aliases {
21 mmc0 = &sdhc_1; /* SDC1 eMMC slot */
22 mmc1 = &sdhc_2; /* SDC2 SD card slot */
23 display0 = &framebuffer0;
24 };
25
26 chosen {
27 #address-cells = <1>;
28 #size-cells = <1>;
29 ranges;
30
31 stdout-path = "display0";
32
33 framebuffer0: framebuffer@3200000 {
34 compatible = "simple-framebuffer";
35 reg = <0x03200000 0x800000>;
36 width = <1280>;
37 height = <800>;
38 stride = <(1280 * 3)>;
39 format = "r8g8b8";
40 };
41 };
42
43 gpio-hall-sensor {
44 compatible = "gpio-keys";
45
46 event-hall-sensor {
47 label = "Hall Effect Sensor";
48 gpios = <&tlmm 110 GPIO_ACTIVE_LOW>;
49 linux,input-type = <EV_SW>;
50 linux,code = <SW_LID>;
51 debounce-interval = <15>;
52 linux,can-disable;
53 wakeup-source;
54 };
55 };
56
57 gpio-keys {
58 compatible = "gpio-keys";
59 autorepeat;
60
61 key-home {
62 label = "Home";
63 gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
64 linux,code = <KEY_HOMEPAGE>;
65 debounce-interval = <15>;
66 };
67
68 key-volume-down {
69 label = "Volume Down";
70 gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
71 linux,code = <KEY_VOLUMEDOWN>;
72 debounce-interval = <15>;
73 };
74
75 key-volume-up {
76 label = "Volume Up";
77 gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
78 linux,code = <KEY_VOLUMEUP>;
79 debounce-interval = <15>;
80 };
81 };
82
83 i2c-backlight {
84 compatible = "i2c-gpio";
85 sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
86 scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
87
88 pinctrl-0 = <&backlight_i2c_default_state>;
89 pinctrl-names = "default";
90
91 i2c-gpio,delay-us = <4>;
92
93 #address-cells = <1>;
94 #size-cells = <0>;
95
96 backlight@2c {
97 compatible = "ti,lp8556";
98 reg = <0x2c>;
99
100 dev-ctrl = /bits/ 8 <0x80>;
101 init-brt = /bits/ 8 <0x3f>;
102
103 pwms = <&backlight_pwm 0 100000>;
104 pwm-names = "lp8556";
105
106 rom-a0h {
107 rom-addr = /bits/ 8 <0xa0>;
108 rom-val = /bits/ 8 <0x44>;
109 };
110
111 rom-a1h {
112 rom-addr = /bits/ 8 <0xa1>;
113 rom-val = /bits/ 8 <0x6c>;
114 };
115
116 rom-a5h {
117 rom-addr = /bits/ 8 <0xa5>;
118 rom-val = /bits/ 8 <0x24>;
119 };
120 };
121 };
122
123 backlight_pwm: pwm {
124 compatible = "clk-pwm";
125 #pwm-cells = <2>;
126 clocks = <&mmcc CAMSS_GP0_CLK>;
127 pinctrl-0 = <&backlight_pwm_default_state>;
128 pinctrl-names = "default";
129 };
130
131 reg_tsp_1p8v: regulator-tsp-1p8v {
132 compatible = "regulator-fixed";
133 regulator-name = "tsp_1p8v";
134 regulator-min-microvolt = <1800000>;
135 regulator-max-microvolt = <1800000>;
136
137 gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
138 enable-active-high;
139
140 pinctrl-names = "default";
141 pinctrl-0 = <&tsp_en_default_state>;
142 };
143
144 reserved-memory {
145 #address-cells = <1>;
146 #size-cells = <1>;
147 ranges;
148
149 framebuffer@3200000 {
150 reg = <0x03200000 0x800000>;
151 no-map;
152 };
153
154 mpss_region: mpss@8400000 {
155 reg = <0x08400000 0x1f00000>;
156 no-map;
157 };
158
159 mba_region: mba@a300000 {
160 reg = <0x0a300000 0x100000>;
161 no-map;
162 };
163
164 reserved@cb00000 {
165 reg = <0x0cb00000 0x700000>;
166 no-map;
167 };
168
169 wcnss@d200000 {
170 reg = <0x0d200000 0x700000>;
171 no-map;
172 };
173
174 adsp_region: adsp@d900000 {
175 reg = <0x0d900000 0x1800000>;
176 no-map;
177 };
178
179 venus@f100000 {
180 reg = <0x0f100000 0x500000>;
181 no-map;
182 };
183
184 smem_region: smem@fa00000 {
185 reg = <0x0fa00000 0x100000>;
186 no-map;
187 };
188
189 reserved@fb00000 {
190 reg = <0x0fb00000 0x260000>;
191 no-map;
192 };
193
194 rfsa@fd60000 {
195 reg = <0x0fd60000 0x20000>;
196 no-map;
197 };
198
199 rmtfs@fd80000 {
200 compatible = "qcom,rmtfs-mem";
201 reg = <0x0fd80000 0x180000>;
202 no-map;
203
204 qcom,client-id = <1>;
205 };
206 };
207 };
208
209 &adsp {
210 status = "okay";
211 };
212
213 &blsp1_i2c4 {
214 status = "okay";
215
216 muic: usb-switch@25 {
217 compatible = "siliconmitus,sm5502-muic";
218 reg = <0x25>;
219
220 interrupt-parent = <&tlmm>;
221 interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
222
223 pinctrl-names = "default";
224 pinctrl-0 = <&muic_int_default_state>;
225 };
226 };
227
228 &blsp1_uart3 {
229 status = "okay";
230 };
231
232 &modem {
233 mx-supply = <&pm8226_l3>;
234 pll-supply = <&pm8226_l8>;
235
236 status = "okay";
237 };
238
239 &rpm_requests {
240 regulators {
241 compatible = "qcom,rpm-pm8226-regulators";
242
243 pm8226_s3: s3 {
244 regulator-min-microvolt = <1200000>;
245 regulator-max-microvolt = <1300000>;
246 };
247
248 pm8226_s4: s4 {
249 regulator-min-microvolt = <1800000>;
250 regulator-max-microvolt = <2200000>;
251 };
252
253 pm8226_s5: s5 {
254 regulator-min-microvolt = <1150000>;
255 regulator-max-microvolt = <1150000>;
256 };
257
258 pm8226_l1: l1 {
259 regulator-min-microvolt = <1225000>;
260 regulator-max-microvolt = <1225000>;
261 };
262
263 pm8226_l2: l2 {
264 regulator-min-microvolt = <1200000>;
265 regulator-max-microvolt = <1200000>;
266 };
267
268 pm8226_l3: l3 {
269 regulator-min-microvolt = <750000>;
270 regulator-max-microvolt = <1350000>;
271 regulator-always-on;
272 };
273
274 pm8226_l4: l4 {
275 regulator-min-microvolt = <1200000>;
276 regulator-max-microvolt = <1200000>;
277 };
278
279 pm8226_l5: l5 {
280 regulator-min-microvolt = <1200000>;
281 regulator-max-microvolt = <1200000>;
282 };
283
284 pm8226_l6: l6 {
285 regulator-min-microvolt = <1800000>;
286 regulator-max-microvolt = <1800000>;
287 regulator-always-on;
288 };
289
290 pm8226_l7: l7 {
291 regulator-min-microvolt = <1850000>;
292 regulator-max-microvolt = <1850000>;
293 };
294
295 pm8226_l8: l8 {
296 regulator-min-microvolt = <1800000>;
297 regulator-max-microvolt = <1800000>;
298 regulator-always-on;
299 };
300
301 pm8226_l9: l9 {
302 regulator-min-microvolt = <2050000>;
303 regulator-max-microvolt = <2050000>;
304 };
305
306 pm8226_l10: l10 {
307 regulator-min-microvolt = <1800000>;
308 regulator-max-microvolt = <1800000>;
309 };
310
311 pm8226_l12: l12 {
312 regulator-min-microvolt = <1800000>;
313 regulator-max-microvolt = <1800000>;
314 };
315
316 pm8226_l14: l14 {
317 regulator-min-microvolt = <2750000>;
318 regulator-max-microvolt = <2750000>;
319 };
320
321 pm8226_l15: l15 {
322 regulator-min-microvolt = <1800000>;
323 regulator-max-microvolt = <3300000>;
324 };
325
326 pm8226_l16: l16 {
327 regulator-min-microvolt = <3000000>;
328 regulator-max-microvolt = <3350000>;
329 };
330
331 pm8226_l17: l17 {
332 regulator-min-microvolt = <2950000>;
333 regulator-max-microvolt = <2950000>;
334
335 regulator-system-load = <200000>;
336 regulator-allow-set-load;
337 regulator-always-on;
338 };
339
340 pm8226_l18: l18 {
341 regulator-min-microvolt = <2950000>;
342 regulator-max-microvolt = <2950000>;
343 };
344
345 pm8226_l19: l19 {
346 regulator-min-microvolt = <2850000>;
347 regulator-max-microvolt = <3000000>;
348 };
349
350 pm8226_l20: l20 {
351 regulator-min-microvolt = <3075000>;
352 regulator-max-microvolt = <3075000>;
353 };
354
355 pm8226_l21: l21 {
356 regulator-min-microvolt = <1800000>;
357 regulator-max-microvolt = <2950000>;
358 };
359
360 pm8226_l22: l22 {
361 regulator-min-microvolt = <1800000>;
362 regulator-max-microvolt = <3000000>;
363 };
364
365 pm8226_l23: l23 {
366 regulator-min-microvolt = <1800000>;
367 regulator-max-microvolt = <3300000>;
368 };
369
370 pm8226_l24: l24 {
371 regulator-min-microvolt = <1300000>;
372 regulator-max-microvolt = <1350000>;
373 };
374
375 pm8226_l25: l25 {
376 regulator-min-microvolt = <1775000>;
377 regulator-max-microvolt = <2125000>;
378 };
379
380 pm8226_l26: l26 {
381 regulator-min-microvolt = <1225000>;
382 regulator-max-microvolt = <1300000>;
383 };
384
385 pm8226_l27: l27 {
386 regulator-min-microvolt = <1800000>;
387 regulator-max-microvolt = <1800000>;
388 };
389
390 pm8226_l28: l28 {
391 regulator-min-microvolt = <1800000>;
392 regulator-max-microvolt = <2950000>;
393 };
394
395 pm8226_lvs1: lvs1 {};
396 };
397 };
398
399 &sdhc_1 {
400 vmmc-supply = <&pm8226_l17>;
401 vqmmc-supply = <&pm8226_l6>;
402
403 bus-width = <8>;
404 non-removable;
405
406 status = "okay";
407 };
408
409 &sdhc_2 {
410 vmmc-supply = <&pm8226_l18>;
411 vqmmc-supply = <&pm8226_l21>;
412
413 bus-width = <4>;
414 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
415
416 status = "okay";
417 };
418
419 &tlmm {
420 accel_int_default_state: accel-int-default-state {
421 pins = "gpio54";
422 function = "gpio";
423 drive-strength = <2>;
424 bias-disable;
425 };
426
427 backlight_i2c_default_state: backlight-i2c-default-state {
428 pins = "gpio20", "gpio21";
429 function = "gpio";
430 drive-strength = <2>;
431 bias-disable;
432 };
433
434 backlight_pwm_default_state: backlight-pwm-default-state {
435 pins = "gpio33";
436 function = "gp0_clk";
437 };
438
439 muic_int_default_state: muic-int-default-state {
440 pins = "gpio67";
441 function = "gpio";
442 drive-strength = <2>;
443 bias-disable;
444 };
445
446 tsp_en_default_state: tsp-en-default-state {
447 pins = "gpio31";
448 function = "gpio";
449 drive-strength = <2>;
450 bias-disable;
451 };
452
453 tsp_int_rst_default_state: tsp-int-rst-default-state {
454 pins = "gpio17";
455 function = "gpio";
456 drive-strength = <10>;
457 bias-pull-up;
458 };
459 };
460
461 &usb {
462 extcon = <&muic>, <&muic>;
463 status = "okay";
464 };
465
466 &usb_hs_phy {
467 extcon = <&muic>;
468 v1p8-supply = <&pm8226_l10>;
469 v3p3-supply = <&pm8226_l20>;
470 };