Debian Codegraph @

arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts

raw
1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * Copyright (c) 2022, Matti Lehtimäki <[email protected]>
4 * Copyright (c) 2023, Bryant Mairs <[email protected]>
5 */
6
7 /dts-v1/;
8
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/power/summit,smb347-charger.h>
11 #include "qcom-msm8226.dtsi"
12 #include "pm8226.dtsi"
13
14 /delete-node/ &adsp_region;
15 /delete-node/ &mba_region;
16 /delete-node/ &mpss_region;
17 /delete-node/ &smem_region;
18
19 / {
20 model = "Samsung Galaxy Tab 4 8.0 Wi-Fi";
21 compatible = "samsung,milletwifi", "qcom,apq8026";
22 chassis-type = "tablet";
23
24 aliases {
25 display0 = &framebuffer0;
26 mmc0 = &sdhc_1; /* SDC1 eMMC slot */
27 mmc1 = &sdhc_2; /* SDC2 SD card slot */
28 };
29
30 chosen {
31 #address-cells = <1>;
32 #size-cells = <1>;
33 ranges;
34
35 stdout-path = "display0";
36
37 framebuffer0: framebuffer@3200000 {
38 compatible = "simple-framebuffer";
39 reg = <0x03200000 0x800000>;
40 width = <800>;
41 height = <1280>;
42 stride = <(800 * 3)>;
43 format = "r8g8b8";
44 };
45 };
46
47 gpio-hall-sensor {
48 compatible = "gpio-keys";
49
50 event-hall-sensor {
51 label = "Cover";
52 gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
53 linux,input-type = <EV_SW>;
54 linux,code = <SW_LID>;
55 debounce-interval = <15>;
56 linux,can-disable;
57 wakeup-source;
58 };
59 };
60
61 gpio-keys {
62 compatible = "gpio-keys";
63 autorepeat;
64
65 key-home {
66 label = "Home";
67 gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
68 linux,code = <KEY_HOMEPAGE>;
69 debounce-interval = <15>;
70 };
71
72 key-volume-down {
73 label = "Volume Down";
74 gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
75 linux,code = <KEY_VOLUMEDOWN>;
76 debounce-interval = <15>;
77 };
78
79 key-volume-up {
80 label = "Volume Up";
81 gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
82 linux,code = <KEY_VOLUMEUP>;
83 debounce-interval = <15>;
84 };
85 };
86
87 i2c-backlight {
88 compatible = "i2c-gpio";
89 sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
90 scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
91
92 pinctrl-0 = <&backlight_i2c_default_state>;
93 pinctrl-names = "default";
94
95 i2c-gpio,delay-us = <4>;
96
97 #address-cells = <1>;
98 #size-cells = <0>;
99
100 backlight@2c {
101 compatible = "ti,lp8556";
102 reg = <0x2c>;
103 enable-supply = <&reg_backlight_vddio>;
104
105 dev-ctrl = /bits/ 8 <0x80>;
106 init-brt = /bits/ 8 <0x3f>;
107
108 /*
109 * Change transition duration: 200ms, Change
110 * transition strength: heavy, PWM hysteresis:
111 * 1-bit w/ 8-bit resolution
112 */
113 rom-a3h {
114 rom-addr = /bits/ 8 <0xa3>;
115 rom-val = /bits/ 8 <0x5e>;
116 };
117
118 /*
119 * PWM phase configuration: 3-phase/3 drivers
120 * (0, 120deg, 240deg, -, -, -),
121 * PWM frequency: 9616Hz (10-bit)
122 */
123 rom-a5h {
124 rom-addr = /bits/ 8 <0xa5>;
125 rom-val = /bits/ 8 <0x34>;
126 };
127
128 /*
129 * Enable LED drivers 2 & 3, Boot inductor
130 * current limit: 1.5A/2.6A
131 */
132 rom-a7h {
133 rom-addr = /bits/ 8 <0xa7>;
134 rom-val = /bits/ 8 <0xfa>;
135 };
136 };
137 };
138
139 reg_backlight_vddio: regulator-backlight-vddio {
140 compatible = "regulator-fixed";
141 regulator-name = "backlight_vddio";
142 regulator-min-microvolt = <1800000>;
143 regulator-max-microvolt = <1800000>;
144
145 gpio = <&tlmm 74 GPIO_ACTIVE_HIGH>;
146 enable-active-high;
147
148 pinctrl-0 = <&backlight_vddio_default_state>;
149 pinctrl-names = "default";
150 };
151
152 reg_tsp_1p8v: regulator-tsp-1p8v {
153 compatible = "regulator-fixed";
154 regulator-name = "tsp_1p8v";
155 regulator-min-microvolt = <1800000>;
156 regulator-max-microvolt = <1800000>;
157
158 gpio = <&tlmm 114 GPIO_ACTIVE_HIGH>;
159 enable-active-high;
160
161 pinctrl-0 = <&tsp_en1_default_state>;
162 pinctrl-names = "default";
163 };
164
165 reg_tsp_3p3v: regulator-tsp-3p3v {
166 compatible = "regulator-fixed";
167 regulator-name = "tsp_3p3v";
168 regulator-min-microvolt = <3300000>;
169 regulator-max-microvolt = <3300000>;
170
171 gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
172 enable-active-high;
173
174 pinctrl-0 = <&tsp_en_default_state>;
175 pinctrl-names = "default";
176 };
177
178 reserved-memory {
179 #address-cells = <1>;
180 #size-cells = <1>;
181 ranges;
182
183 framebuffer@3200000 {
184 reg = <0x03200000 0x800000>;
185 no-map;
186 };
187
188 mpss_region: mpss@8400000 {
189 reg = <0x08400000 0x1f00000>;
190 no-map;
191 };
192
193 mba_region: mba@a300000 {
194 reg = <0x0a300000 0x100000>;
195 no-map;
196 };
197
198 reserved@cb00000 {
199 reg = <0x0cb00000 0x700000>;
200 no-map;
201 };
202
203 wcnss_region: wcnss@d200000 {
204 reg = <0x0d200000 0x700000>;
205 no-map;
206 };
207
208 adsp_region: adsp@d900000 {
209 reg = <0x0d900000 0x1800000>;
210 no-map;
211 };
212
213 venus@f100000 {
214 reg = <0x0f100000 0x500000>;
215 no-map;
216 };
217
218 smem_region: smem@fa00000 {
219 reg = <0x0fa00000 0x100000>;
220 no-map;
221 };
222
223 reserved@fb00000 {
224 reg = <0x0fb00000 0x260000>;
225 no-map;
226 };
227
228 rfsa@fd60000 {
229 reg = <0x0fd60000 0x20000>;
230 no-map;
231 };
232
233 rmtfs@fd80000 {
234 compatible = "qcom,rmtfs-mem";
235 reg = <0x0fd80000 0x180000>;
236 no-map;
237
238 qcom,client-id = <1>;
239 };
240 };
241 };
242
243 &blsp1_i2c2 {
244 status = "okay";
245
246 accelerometer@1d {
247 compatible = "st,lis2hh12";
248 reg = <0x1d>;
249
250 interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>;
251
252 pinctrl-0 = <&accel_int_default_state>;
253 pinctrl-names = "default";
254
255 vdd-supply = <&pm8226_l19>;
256 vddio-supply = <&pm8226_lvs1>;
257
258 mount-matrix = "0", "1", "0",
259 "-1", "0", "0",
260 "0", "0", "1";
261
262 st,drdy-int-pin = <1>;
263 };
264 };
265
266 &blsp1_i2c3 {
267 status = "okay";
268
269 charger@6a {
270 compatible = "summit,smb358";
271 reg = <0x6a>;
272
273 interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_FALLING>;
274
275 pinctrl-0 = <&charger_int_default_state>;
276 pinctrl-names = "default";
277
278 summit,enable-usb-charging;
279 summit,enable-charge-control = <SMB3XX_CHG_ENABLE_SW>;
280 summit,fast-voltage-threshold-microvolt = <3000000>;
281 summit,chip-temperature-threshold-celsius = <130>;
282 summit,usb-current-limit-microamp = <1500000>;
283 };
284 };
285
286 &blsp1_i2c4 {
287 status = "okay";
288
289 muic: usb-switch@25 {
290 compatible = "siliconmitus,sm5502-muic";
291 reg = <0x25>;
292
293 interrupts-extended = <&tlmm 67 IRQ_TYPE_EDGE_FALLING>;
294
295 pinctrl-0 = <&muic_int_default_state>;
296 pinctrl-names = "default";
297 };
298 };
299
300 &blsp1_i2c5 {
301 status = "okay";
302
303 touchscreen@48 {
304 compatible = "melfas,mms252", "melfas,mms114";
305 reg = <0x48>;
306 interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
307 touchscreen-size-x = <800>;
308 touchscreen-size-y = <1280>;
309 avdd-supply = <&reg_tsp_3p3v>;
310 vdd-supply = <&reg_tsp_1p8v>;
311 linux,keycodes = <KEY_APPSELECT KEY_BACK>;
312
313 pinctrl-0 = <&tsp_int_rst_default_state>;
314 pinctrl-names = "default";
315 };
316 };
317
318 &rpm_requests {
319 regulators {
320 compatible = "qcom,rpm-pm8226-regulators";
321
322 pm8226_s3: s3 {
323 regulator-min-microvolt = <1200000>;
324 regulator-max-microvolt = <1300000>;
325 };
326
327 pm8226_s4: s4 {
328 regulator-min-microvolt = <1800000>;
329 regulator-max-microvolt = <1800000>;
330 };
331
332 pm8226_s5: s5 {
333 regulator-min-microvolt = <1150000>;
334 regulator-max-microvolt = <1150000>;
335 };
336
337 pm8226_l1: l1 {
338 regulator-min-microvolt = <1225000>;
339 regulator-max-microvolt = <1225000>;
340 };
341
342 pm8226_l2: l2 {
343 regulator-min-microvolt = <1200000>;
344 regulator-max-microvolt = <1200000>;
345 };
346
347 pm8226_l3: l3 {
348 regulator-min-microvolt = <750000>;
349 regulator-max-microvolt = <1337500>;
350 regulator-always-on;
351 };
352
353 pm8226_l4: l4 {
354 regulator-min-microvolt = <1200000>;
355 regulator-max-microvolt = <1200000>;
356 };
357
358 pm8226_l5: l5 {
359 regulator-min-microvolt = <1200000>;
360 regulator-max-microvolt = <1200000>;
361 };
362
363 pm8226_l6: l6 {
364 regulator-min-microvolt = <1800000>;
365 regulator-max-microvolt = <1800000>;
366 regulator-always-on;
367 };
368
369 pm8226_l7: l7 {
370 regulator-min-microvolt = <1850000>;
371 regulator-max-microvolt = <1850000>;
372 };
373
374 pm8226_l8: l8 {
375 regulator-min-microvolt = <1800000>;
376 regulator-max-microvolt = <1800000>;
377 regulator-always-on;
378 };
379
380 pm8226_l9: l9 {
381 regulator-min-microvolt = <2050000>;
382 regulator-max-microvolt = <2050000>;
383 };
384
385 pm8226_l10: l10 {
386 regulator-min-microvolt = <1800000>;
387 regulator-max-microvolt = <1800000>;
388 };
389
390 pm8226_l12: l12 {
391 regulator-min-microvolt = <1800000>;
392 regulator-max-microvolt = <1800000>;
393 };
394
395 pm8226_l14: l14 {
396 regulator-min-microvolt = <2750000>;
397 regulator-max-microvolt = <2750000>;
398 };
399
400 pm8226_l15: l15 {
401 regulator-min-microvolt = <1800000>;
402 regulator-max-microvolt = <3300000>;
403 };
404
405 pm8226_l16: l16 {
406 regulator-min-microvolt = <3000000>;
407 regulator-max-microvolt = <3350000>;
408 };
409
410 pm8226_l17: l17 {
411 regulator-min-microvolt = <2950000>;
412 regulator-max-microvolt = <2950000>;
413
414 regulator-system-load = <200000>;
415 regulator-allow-set-load;
416 regulator-always-on;
417 };
418
419 pm8226_l18: l18 {
420 regulator-min-microvolt = <2950000>;
421 regulator-max-microvolt = <2950000>;
422 };
423
424 pm8226_l19: l19 {
425 regulator-min-microvolt = <2850000>;
426 regulator-max-microvolt = <3000000>;
427 };
428
429 pm8226_l20: l20 {
430 regulator-min-microvolt = <3075000>;
431 regulator-max-microvolt = <3075000>;
432 };
433
434 pm8226_l21: l21 {
435 regulator-min-microvolt = <1800000>;
436 regulator-max-microvolt = <2950000>;
437 };
438
439 pm8226_l22: l22 {
440 regulator-min-microvolt = <1800000>;
441 regulator-max-microvolt = <3000000>;
442 };
443
444 pm8226_l23: l23 {
445 regulator-min-microvolt = <1800000>;
446 regulator-max-microvolt = <3300000>;
447 };
448
449 pm8226_l24: l24 {
450 regulator-min-microvolt = <1300000>;
451 regulator-max-microvolt = <1350000>;
452 };
453
454 pm8226_l25: l25 {
455 regulator-min-microvolt = <1775000>;
456 regulator-max-microvolt = <2125000>;
457 };
458
459 pm8226_l26: l26 {
460 regulator-min-microvolt = <1225000>;
461 regulator-max-microvolt = <1300000>;
462 };
463
464 pm8226_l27: l27 {
465 regulator-min-microvolt = <1800000>;
466 regulator-max-microvolt = <1800000>;
467 };
468
469 pm8226_l28: l28 {
470 regulator-min-microvolt = <1800000>;
471 regulator-max-microvolt = <2950000>;
472 };
473
474 pm8226_lvs1: lvs1 {};
475 };
476 };
477
478 &sdhc_1 {
479 vmmc-supply = <&pm8226_l17>;
480 vqmmc-supply = <&pm8226_l6>;
481
482 bus-width = <8>;
483 non-removable;
484
485 status = "okay";
486 };
487
488 &sdhc_2 {
489 vmmc-supply = <&pm8226_l18>;
490 vqmmc-supply = <&pm8226_l21>;
491
492 bus-width = <4>;
493 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
494
495 pinctrl-0 = <&sdhc2_default_state>, <&sdc2_cd_default_state>;
496 pinctrl-names = "default";
497
498 status = "okay";
499 };
500
501 &tlmm {
502 accel_int_default_state: accel-int-default-state {
503 pins = "gpio54";
504 function = "gpio";
505 drive-strength = <2>;
506 bias-disable;
507 };
508
509 backlight_i2c_default_state: backlight-i2c-default-state {
510 pins = "gpio20", "gpio21";
511 function = "gpio";
512 drive-strength = <2>;
513 bias-disable;
514 };
515
516 backlight_vddio_default_state: backlight-vddio-default-state {
517 pins = "gpio74";
518 function = "gpio";
519 drive-strength = <2>;
520 bias-disable;
521 };
522
523 charger_int_default_state: charger-int-default-state {
524 pins = "gpio115";
525 function = "gpio";
526 drive-strength = <2>;
527 bias-disable;
528 };
529
530 muic_int_default_state: muic-int-default-state {
531 pins = "gpio67";
532 function = "gpio";
533 drive-strength = <2>;
534 bias-disable;
535 };
536
537 sdc2_cd_default_state: sdc2-cd-default-state {
538 pins = "gpio38";
539 function = "gpio";
540 drive-strength = <2>;
541 bias-disable;
542 };
543
544 tsp_en_default_state: tsp-en-default-state {
545 pins = "gpio31";
546 function = "gpio";
547 drive-strength = <2>;
548 bias-disable;
549 };
550
551 tsp_en1_default_state: tsp-en1-default-state {
552 pins = "gpio114";
553 function = "gpio";
554 drive-strength = <2>;
555 bias-disable;
556 };
557
558 tsp_int_rst_default_state: tsp-int-rst-default-state {
559 pins = "gpio17";
560 function = "gpio";
561 drive-strength = <10>;
562 bias-pull-up;
563 };
564 };
565
566 &usb {
567 extcon = <&muic>, <&muic>;
568 status = "okay";
569 };
570
571 &usb_hs_phy {
572 extcon = <&muic>;
573 v1p8-supply = <&pm8226_l10>;
574 v3p3-supply = <&pm8226_l20>;
575 };