| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/dts-v1/; |
| 3 |
|
| 4 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 5 |
#include <dt-bindings/mfd/qcom-rpm.h> |
| 6 |
#include <dt-bindings/clock/qcom,rpmcc.h> |
| 7 |
#include <dt-bindings/clock/qcom,gcc-ipq806x.h> |
| 8 |
#include <dt-bindings/clock/qcom,lcc-ipq806x.h> |
| 9 |
#include <dt-bindings/gpio/gpio.h> |
| 10 |
#include <dt-bindings/reset/qcom,gcc-ipq806x.h> |
| 11 |
#include <dt-bindings/soc/qcom,gsbi.h> |
| 12 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 13 |
|
| 14 |
/ { |
| 15 |
#address-cells = <1>; |
| 16 |
#size-cells = <1>; |
| 17 |
model = "Qualcomm IPQ8064"; |
| 18 |
compatible = "qcom,ipq8064"; |
| 19 |
interrupt-parent = <&intc>; |
| 20 |
|
| 21 |
cpus { |
| 22 |
#address-cells = <1>; |
| 23 |
#size-cells = <0>; |
| 24 |
|
| 25 |
cpu0: cpu@0 { |
| 26 |
compatible = "qcom,krait"; |
| 27 |
enable-method = "qcom,kpss-acc-v1"; |
| 28 |
device_type = "cpu"; |
| 29 |
reg = <0>; |
| 30 |
next-level-cache = <&l2>; |
| 31 |
qcom,acc = <&acc0>; |
| 32 |
qcom,saw = <&saw0>; |
| 33 |
}; |
| 34 |
|
| 35 |
cpu1: cpu@1 { |
| 36 |
compatible = "qcom,krait"; |
| 37 |
enable-method = "qcom,kpss-acc-v1"; |
| 38 |
device_type = "cpu"; |
| 39 |
reg = <1>; |
| 40 |
next-level-cache = <&l2>; |
| 41 |
qcom,acc = <&acc1>; |
| 42 |
qcom,saw = <&saw1>; |
| 43 |
}; |
| 44 |
|
| 45 |
l2: l2-cache { |
| 46 |
compatible = "cache"; |
| 47 |
cache-level = <2>; |
| 48 |
cache-unified; |
| 49 |
}; |
| 50 |
}; |
| 51 |
|
| 52 |
thermal-zones { |
| 53 |
sensor0-thermal { |
| 54 |
polling-delay-passive = <0>; |
| 55 |
polling-delay = <0>; |
| 56 |
thermal-sensors = <&tsens 0>; |
| 57 |
|
| 58 |
trips { |
| 59 |
cpu-critical { |
| 60 |
temperature = <105000>; |
| 61 |
hysteresis = <2000>; |
| 62 |
type = "critical"; |
| 63 |
}; |
| 64 |
|
| 65 |
cpu-hot { |
| 66 |
temperature = <95000>; |
| 67 |
hysteresis = <2000>; |
| 68 |
type = "hot"; |
| 69 |
}; |
| 70 |
}; |
| 71 |
}; |
| 72 |
|
| 73 |
sensor1-thermal { |
| 74 |
polling-delay-passive = <0>; |
| 75 |
polling-delay = <0>; |
| 76 |
thermal-sensors = <&tsens 1>; |
| 77 |
|
| 78 |
trips { |
| 79 |
cpu-critical { |
| 80 |
temperature = <105000>; |
| 81 |
hysteresis = <2000>; |
| 82 |
type = "critical"; |
| 83 |
}; |
| 84 |
|
| 85 |
cpu-hot { |
| 86 |
temperature = <95000>; |
| 87 |
hysteresis = <2000>; |
| 88 |
type = "hot"; |
| 89 |
}; |
| 90 |
}; |
| 91 |
}; |
| 92 |
|
| 93 |
sensor2-thermal { |
| 94 |
polling-delay-passive = <0>; |
| 95 |
polling-delay = <0>; |
| 96 |
thermal-sensors = <&tsens 2>; |
| 97 |
|
| 98 |
trips { |
| 99 |
cpu-critical { |
| 100 |
temperature = <105000>; |
| 101 |
hysteresis = <2000>; |
| 102 |
type = "critical"; |
| 103 |
}; |
| 104 |
|
| 105 |
cpu-hot { |
| 106 |
temperature = <95000>; |
| 107 |
hysteresis = <2000>; |
| 108 |
type = "hot"; |
| 109 |
}; |
| 110 |
}; |
| 111 |
}; |
| 112 |
|
| 113 |
sensor3-thermal { |
| 114 |
polling-delay-passive = <0>; |
| 115 |
polling-delay = <0>; |
| 116 |
thermal-sensors = <&tsens 3>; |
| 117 |
|
| 118 |
trips { |
| 119 |
cpu-critical { |
| 120 |
temperature = <105000>; |
| 121 |
hysteresis = <2000>; |
| 122 |
type = "critical"; |
| 123 |
}; |
| 124 |
|
| 125 |
cpu-hot { |
| 126 |
temperature = <95000>; |
| 127 |
hysteresis = <2000>; |
| 128 |
type = "hot"; |
| 129 |
}; |
| 130 |
}; |
| 131 |
}; |
| 132 |
|
| 133 |
sensor4-thermal { |
| 134 |
polling-delay-passive = <0>; |
| 135 |
polling-delay = <0>; |
| 136 |
thermal-sensors = <&tsens 4>; |
| 137 |
|
| 138 |
trips { |
| 139 |
cpu-critical { |
| 140 |
temperature = <105000>; |
| 141 |
hysteresis = <2000>; |
| 142 |
type = "critical"; |
| 143 |
}; |
| 144 |
|
| 145 |
cpu-hot { |
| 146 |
temperature = <95000>; |
| 147 |
hysteresis = <2000>; |
| 148 |
type = "hot"; |
| 149 |
}; |
| 150 |
}; |
| 151 |
}; |
| 152 |
|
| 153 |
sensor5-thermal { |
| 154 |
polling-delay-passive = <0>; |
| 155 |
polling-delay = <0>; |
| 156 |
thermal-sensors = <&tsens 5>; |
| 157 |
|
| 158 |
trips { |
| 159 |
cpu-critical { |
| 160 |
temperature = <105000>; |
| 161 |
hysteresis = <2000>; |
| 162 |
type = "critical"; |
| 163 |
}; |
| 164 |
|
| 165 |
cpu-hot { |
| 166 |
temperature = <95000>; |
| 167 |
hysteresis = <2000>; |
| 168 |
type = "hot"; |
| 169 |
}; |
| 170 |
}; |
| 171 |
}; |
| 172 |
|
| 173 |
sensor6-thermal { |
| 174 |
polling-delay-passive = <0>; |
| 175 |
polling-delay = <0>; |
| 176 |
thermal-sensors = <&tsens 6>; |
| 177 |
|
| 178 |
trips { |
| 179 |
cpu-critical { |
| 180 |
temperature = <105000>; |
| 181 |
hysteresis = <2000>; |
| 182 |
type = "critical"; |
| 183 |
}; |
| 184 |
|
| 185 |
cpu-hot { |
| 186 |
temperature = <95000>; |
| 187 |
hysteresis = <2000>; |
| 188 |
type = "hot"; |
| 189 |
}; |
| 190 |
}; |
| 191 |
}; |
| 192 |
|
| 193 |
sensor7-thermal { |
| 194 |
polling-delay-passive = <0>; |
| 195 |
polling-delay = <0>; |
| 196 |
thermal-sensors = <&tsens 7>; |
| 197 |
|
| 198 |
trips { |
| 199 |
cpu-critical { |
| 200 |
temperature = <105000>; |
| 201 |
hysteresis = <2000>; |
| 202 |
type = "critical"; |
| 203 |
}; |
| 204 |
|
| 205 |
cpu-hot { |
| 206 |
temperature = <95000>; |
| 207 |
hysteresis = <2000>; |
| 208 |
type = "hot"; |
| 209 |
}; |
| 210 |
}; |
| 211 |
}; |
| 212 |
|
| 213 |
sensor8-thermal { |
| 214 |
polling-delay-passive = <0>; |
| 215 |
polling-delay = <0>; |
| 216 |
thermal-sensors = <&tsens 8>; |
| 217 |
|
| 218 |
trips { |
| 219 |
cpu-critical { |
| 220 |
temperature = <105000>; |
| 221 |
hysteresis = <2000>; |
| 222 |
type = "critical"; |
| 223 |
}; |
| 224 |
|
| 225 |
cpu-hot { |
| 226 |
temperature = <95000>; |
| 227 |
hysteresis = <2000>; |
| 228 |
type = "hot"; |
| 229 |
}; |
| 230 |
}; |
| 231 |
}; |
| 232 |
|
| 233 |
sensor9-thermal { |
| 234 |
polling-delay-passive = <0>; |
| 235 |
polling-delay = <0>; |
| 236 |
thermal-sensors = <&tsens 9>; |
| 237 |
|
| 238 |
trips { |
| 239 |
cpu-critical { |
| 240 |
temperature = <105000>; |
| 241 |
hysteresis = <2000>; |
| 242 |
type = "critical"; |
| 243 |
}; |
| 244 |
|
| 245 |
cpu-hot { |
| 246 |
temperature = <95000>; |
| 247 |
hysteresis = <2000>; |
| 248 |
type = "hot"; |
| 249 |
}; |
| 250 |
}; |
| 251 |
}; |
| 252 |
|
| 253 |
sensor10-thermal { |
| 254 |
polling-delay-passive = <0>; |
| 255 |
polling-delay = <0>; |
| 256 |
thermal-sensors = <&tsens 10>; |
| 257 |
|
| 258 |
trips { |
| 259 |
cpu-critical { |
| 260 |
temperature = <105000>; |
| 261 |
hysteresis = <2000>; |
| 262 |
type = "critical"; |
| 263 |
}; |
| 264 |
|
| 265 |
cpu-hot { |
| 266 |
temperature = <95000>; |
| 267 |
hysteresis = <2000>; |
| 268 |
type = "hot"; |
| 269 |
}; |
| 270 |
}; |
| 271 |
}; |
| 272 |
}; |
| 273 |
|
| 274 |
memory { |
| 275 |
device_type = "memory"; |
| 276 |
reg = <0x0 0x0>; |
| 277 |
}; |
| 278 |
|
| 279 |
cpu-pmu { |
| 280 |
compatible = "qcom,krait-pmu"; |
| 281 |
interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | |
| 282 |
IRQ_TYPE_LEVEL_HIGH)>; |
| 283 |
}; |
| 284 |
|
| 285 |
reserved-memory { |
| 286 |
#address-cells = <1>; |
| 287 |
#size-cells = <1>; |
| 288 |
ranges; |
| 289 |
|
| 290 |
nss@40000000 { |
| 291 |
reg = <0x40000000 0x1000000>; |
| 292 |
no-map; |
| 293 |
}; |
| 294 |
|
| 295 |
smem: smem@41000000 { |
| 296 |
compatible = "qcom,smem"; |
| 297 |
reg = <0x41000000 0x200000>; |
| 298 |
no-map; |
| 299 |
|
| 300 |
hwlocks = <&sfpb_mutex 3>; |
| 301 |
}; |
| 302 |
}; |
| 303 |
|
| 304 |
clocks { |
| 305 |
cxo_board: cxo_board { |
| 306 |
compatible = "fixed-clock"; |
| 307 |
#clock-cells = <0>; |
| 308 |
clock-frequency = <25000000>; |
| 309 |
}; |
| 310 |
|
| 311 |
pxo_board: pxo_board { |
| 312 |
compatible = "fixed-clock"; |
| 313 |
#clock-cells = <0>; |
| 314 |
clock-frequency = <25000000>; |
| 315 |
}; |
| 316 |
|
| 317 |
sleep_clk: sleep_clk { |
| 318 |
compatible = "fixed-clock"; |
| 319 |
clock-frequency = <32768>; |
| 320 |
#clock-cells = <0>; |
| 321 |
}; |
| 322 |
}; |
| 323 |
|
| 324 |
firmware { |
| 325 |
scm { |
| 326 |
compatible = "qcom,scm-ipq806x", "qcom,scm"; |
| 327 |
}; |
| 328 |
}; |
| 329 |
|
| 330 |
stmmac_axi_setup: stmmac-axi-config { |
| 331 |
snps,wr_osr_lmt = <7>; |
| 332 |
snps,rd_osr_lmt = <7>; |
| 333 |
snps,blen = <16 0 0 0 0 0 0>; |
| 334 |
}; |
| 335 |
|
| 336 |
vsdcc_fixed: vsdcc-regulator { |
| 337 |
compatible = "regulator-fixed"; |
| 338 |
regulator-name = "SDCC Power"; |
| 339 |
regulator-min-microvolt = <3300000>; |
| 340 |
regulator-max-microvolt = <3300000>; |
| 341 |
regulator-always-on; |
| 342 |
}; |
| 343 |
|
| 344 |
soc: soc { |
| 345 |
#address-cells = <1>; |
| 346 |
#size-cells = <1>; |
| 347 |
ranges; |
| 348 |
compatible = "simple-bus"; |
| 349 |
|
| 350 |
rpm: rpm@108000 { |
| 351 |
compatible = "qcom,rpm-ipq8064"; |
| 352 |
reg = <0x00108000 0x1000>; |
| 353 |
qcom,ipc = <&l2cc 0x8 2>; |
| 354 |
|
| 355 |
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, |
| 356 |
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, |
| 357 |
<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; |
| 358 |
interrupt-names = "ack", "err", "wakeup"; |
| 359 |
|
| 360 |
clocks = <&gcc RPM_MSG_RAM_H_CLK>; |
| 361 |
clock-names = "ram"; |
| 362 |
|
| 363 |
rpmcc: clock-controller { |
| 364 |
compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc"; |
| 365 |
#clock-cells = <1>; |
| 366 |
}; |
| 367 |
}; |
| 368 |
|
| 369 |
ssbi@500000 { |
| 370 |
compatible = "qcom,ssbi"; |
| 371 |
reg = <0x00500000 0x1000>; |
| 372 |
qcom,controller-type = "pmic-arbiter"; |
| 373 |
}; |
| 374 |
|
| 375 |
qfprom: efuse@700000 { |
| 376 |
compatible = "qcom,ipq8064-qfprom", "qcom,qfprom"; |
| 377 |
reg = <0x00700000 0x1000>; |
| 378 |
#address-cells = <1>; |
| 379 |
#size-cells = <1>; |
| 380 |
speedbin_efuse: speedbin@c0 { |
| 381 |
reg = <0xc0 0x4>; |
| 382 |
}; |
| 383 |
tsens_calib: calib@400 { |
| 384 |
reg = <0x400 0xb>; |
| 385 |
}; |
| 386 |
tsens_calib_backup: calib-backup@410 { |
| 387 |
reg = <0x410 0xb>; |
| 388 |
}; |
| 389 |
}; |
| 390 |
|
| 391 |
qcom_pinmux: pinmux@800000 { |
| 392 |
compatible = "qcom,ipq8064-pinctrl"; |
| 393 |
reg = <0x00800000 0x4000>; |
| 394 |
|
| 395 |
gpio-controller; |
| 396 |
gpio-ranges = <&qcom_pinmux 0 0 69>; |
| 397 |
#gpio-cells = <2>; |
| 398 |
interrupt-controller; |
| 399 |
#interrupt-cells = <2>; |
| 400 |
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| 401 |
|
| 402 |
pcie0_pins: pcie0-state { |
| 403 |
pins = "gpio3"; |
| 404 |
function = "pcie1_rst"; |
| 405 |
drive-strength = <12>; |
| 406 |
bias-disable; |
| 407 |
}; |
| 408 |
|
| 409 |
pcie1_pins: pcie1-state { |
| 410 |
pins = "gpio48"; |
| 411 |
function = "pcie2_rst"; |
| 412 |
drive-strength = <12>; |
| 413 |
bias-disable; |
| 414 |
}; |
| 415 |
|
| 416 |
pcie2_pins: pcie2-state { |
| 417 |
pins = "gpio63"; |
| 418 |
function = "pcie3_rst"; |
| 419 |
drive-strength = <12>; |
| 420 |
bias-disable; |
| 421 |
}; |
| 422 |
|
| 423 |
i2c4_pins: i2c4-state { |
| 424 |
pins = "gpio12", "gpio13"; |
| 425 |
function = "gsbi4"; |
| 426 |
drive-strength = <12>; |
| 427 |
bias-disable; |
| 428 |
}; |
| 429 |
|
| 430 |
spi_pins: spi-state { |
| 431 |
pins = "gpio18", "gpio19", "gpio21"; |
| 432 |
function = "gsbi5"; |
| 433 |
drive-strength = <10>; |
| 434 |
bias-disable; |
| 435 |
}; |
| 436 |
|
| 437 |
leds_pins: leds-state { |
| 438 |
pins = "gpio7", "gpio8", "gpio9", |
| 439 |
"gpio26", "gpio53"; |
| 440 |
function = "gpio"; |
| 441 |
drive-strength = <2>; |
| 442 |
bias-pull-down; |
| 443 |
output-low; |
| 444 |
}; |
| 445 |
|
| 446 |
buttons_pins: buttons-state { |
| 447 |
pins = "gpio54"; |
| 448 |
drive-strength = <2>; |
| 449 |
bias-pull-up; |
| 450 |
}; |
| 451 |
|
| 452 |
nand_pins: nand-state { |
| 453 |
nand-pins { |
| 454 |
pins = "gpio34", "gpio35", "gpio36", |
| 455 |
"gpio37", "gpio38", "gpio39", |
| 456 |
"gpio40", "gpio41", "gpio42", |
| 457 |
"gpio43", "gpio44", "gpio45", |
| 458 |
"gpio46", "gpio47"; |
| 459 |
function = "nand"; |
| 460 |
drive-strength = <10>; |
| 461 |
bias-disable; |
| 462 |
}; |
| 463 |
|
| 464 |
nand-pullup-pins { |
| 465 |
pins = "gpio39"; |
| 466 |
function = "nand"; |
| 467 |
drive-strength = <10>; |
| 468 |
bias-pull-up; |
| 469 |
}; |
| 470 |
|
| 471 |
nand-hold-pins { |
| 472 |
pins = "gpio40", "gpio41", "gpio42", |
| 473 |
"gpio43", "gpio44", "gpio45", |
| 474 |
"gpio46", "gpio47"; |
| 475 |
function = "nand"; |
| 476 |
drive-strength = <10>; |
| 477 |
bias-bus-hold; |
| 478 |
}; |
| 479 |
}; |
| 480 |
|
| 481 |
mdio0_pins: mdio0-state { |
| 482 |
pins = "gpio0", "gpio1"; |
| 483 |
function = "mdio"; |
| 484 |
drive-strength = <8>; |
| 485 |
bias-disable; |
| 486 |
}; |
| 487 |
|
| 488 |
rgmii2_pins: rgmii2-state { |
| 489 |
pins = "gpio27", "gpio28", "gpio29", |
| 490 |
"gpio30", "gpio31", "gpio32", |
| 491 |
"gpio51", "gpio52", "gpio59", |
| 492 |
"gpio60", "gpio61", "gpio62"; |
| 493 |
function = "rgmii2"; |
| 494 |
drive-strength = <8>; |
| 495 |
bias-disable; |
| 496 |
}; |
| 497 |
}; |
| 498 |
|
| 499 |
gcc: clock-controller@900000 { |
| 500 |
compatible = "qcom,gcc-ipq8064", "syscon"; |
| 501 |
clocks = <&pxo_board>, <&cxo_board>, <&lcc PLL4>; |
| 502 |
clock-names = "pxo", "cxo", "pll4"; |
| 503 |
reg = <0x00900000 0x4000>; |
| 504 |
#clock-cells = <1>; |
| 505 |
#reset-cells = <1>; |
| 506 |
|
| 507 |
tsens: thermal-sensor { |
| 508 |
compatible = "qcom,ipq8064-tsens"; |
| 509 |
|
| 510 |
nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>; |
| 511 |
nvmem-cell-names = "calib", "calib_backup"; |
| 512 |
interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; |
| 513 |
interrupt-names = "uplow"; |
| 514 |
|
| 515 |
#qcom,sensors = <11>; |
| 516 |
#thermal-sensor-cells = <1>; |
| 517 |
}; |
| 518 |
}; |
| 519 |
|
| 520 |
sfpb_mutex: hwlock@1200600 { |
| 521 |
compatible = "qcom,sfpb-mutex"; |
| 522 |
reg = <0x01200600 0x100>; |
| 523 |
|
| 524 |
#hwlock-cells = <1>; |
| 525 |
}; |
| 526 |
|
| 527 |
intc: interrupt-controller@2000000 { |
| 528 |
compatible = "qcom,msm-qgic2"; |
| 529 |
interrupt-controller; |
| 530 |
#address-cells = <0>; |
| 531 |
#interrupt-cells = <3>; |
| 532 |
reg = <0x02000000 0x1000>, |
| 533 |
<0x02002000 0x1000>; |
| 534 |
}; |
| 535 |
|
| 536 |
timer@200a000 { |
| 537 |
compatible = "qcom,kpss-wdt-ipq8064", "qcom,kpss-timer", |
| 538 |
"qcom,msm-timer"; |
| 539 |
interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | |
| 540 |
IRQ_TYPE_EDGE_RISING)>, |
| 541 |
<GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | |
| 542 |
IRQ_TYPE_EDGE_RISING)>, |
| 543 |
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | |
| 544 |
IRQ_TYPE_EDGE_RISING)>, |
| 545 |
<GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(2) | |
| 546 |
IRQ_TYPE_EDGE_RISING)>, |
| 547 |
<GIC_PPI 5 (GIC_CPU_MASK_SIMPLE(2) | |
| 548 |
IRQ_TYPE_EDGE_RISING)>; |
| 549 |
reg = <0x0200a000 0x100>; |
| 550 |
clock-frequency = <25000000>; |
| 551 |
clocks = <&sleep_clk>; |
| 552 |
clock-names = "sleep"; |
| 553 |
cpu-offset = <0x80000>; |
| 554 |
}; |
| 555 |
|
| 556 |
l2cc: clock-controller@2011000 { |
| 557 |
compatible = "qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc", "syscon"; |
| 558 |
reg = <0x02011000 0x1000>; |
| 559 |
clocks = <&gcc PLL8_VOTE>, <&pxo_board>; |
| 560 |
clock-names = "pll8_vote", "pxo"; |
| 561 |
#clock-cells = <0>; |
| 562 |
}; |
| 563 |
|
| 564 |
acc0: clock-controller@2088000 { |
| 565 |
compatible = "qcom,kpss-acc-v1"; |
| 566 |
reg = <0x02088000 0x1000>, <0x02008000 0x1000>; |
| 567 |
clocks = <&gcc PLL8_VOTE>, <&pxo_board>; |
| 568 |
clock-names = "pll8_vote", "pxo"; |
| 569 |
clock-output-names = "acpu0_aux"; |
| 570 |
#clock-cells = <0>; |
| 571 |
}; |
| 572 |
|
| 573 |
saw0: power-manager@2089000 { |
| 574 |
compatible = "qcom,ipq8064-saw2-cpu", "qcom,saw2"; |
| 575 |
reg = <0x02089000 0x1000>, <0x02009000 0x1000>; |
| 576 |
}; |
| 577 |
|
| 578 |
acc1: clock-controller@2098000 { |
| 579 |
compatible = "qcom,kpss-acc-v1"; |
| 580 |
reg = <0x02098000 0x1000>, <0x02008000 0x1000>; |
| 581 |
clocks = <&gcc PLL8_VOTE>, <&pxo_board>; |
| 582 |
clock-names = "pll8_vote", "pxo"; |
| 583 |
clock-output-names = "acpu1_aux"; |
| 584 |
#clock-cells = <0>; |
| 585 |
}; |
| 586 |
|
| 587 |
saw1: power-manager@2099000 { |
| 588 |
compatible = "qcom,ipq8064-saw2-cpu", "qcom,saw2"; |
| 589 |
reg = <0x02099000 0x1000>, <0x02009000 0x1000>; |
| 590 |
}; |
| 591 |
|
| 592 |
nss_common: syscon@3000000 { |
| 593 |
compatible = "syscon"; |
| 594 |
reg = <0x03000000 0x0000FFFF>; |
| 595 |
}; |
| 596 |
|
| 597 |
usb3_0: usb@100f8800 { |
| 598 |
compatible = "qcom,ipq8064-dwc3", "qcom,dwc3"; |
| 599 |
#address-cells = <1>; |
| 600 |
#size-cells = <1>; |
| 601 |
reg = <0x100f8800 0x8000>; |
| 602 |
clocks = <&gcc USB30_0_MASTER_CLK>; |
| 603 |
clock-names = "core"; |
| 604 |
|
| 605 |
ranges; |
| 606 |
|
| 607 |
resets = <&gcc USB30_0_MASTER_RESET>; |
| 608 |
|
| 609 |
status = "disabled"; |
| 610 |
|
| 611 |
dwc3_0: usb@10000000 { |
| 612 |
compatible = "snps,dwc3"; |
| 613 |
reg = <0x10000000 0xcd00>; |
| 614 |
interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; |
| 615 |
phys = <&hs_phy_0>, <&ss_phy_0>; |
| 616 |
phy-names = "usb2-phy", "usb3-phy"; |
| 617 |
dr_mode = "host"; |
| 618 |
snps,dis_u3_susphy_quirk; |
| 619 |
}; |
| 620 |
}; |
| 621 |
|
| 622 |
hs_phy_0: phy@100f8800 { |
| 623 |
compatible = "qcom,ipq806x-usb-phy-hs"; |
| 624 |
reg = <0x100f8800 0x30>; |
| 625 |
clocks = <&gcc USB30_0_UTMI_CLK>; |
| 626 |
clock-names = "ref"; |
| 627 |
#phy-cells = <0>; |
| 628 |
|
| 629 |
status = "disabled"; |
| 630 |
}; |
| 631 |
|
| 632 |
ss_phy_0: phy@100f8830 { |
| 633 |
compatible = "qcom,ipq806x-usb-phy-ss"; |
| 634 |
reg = <0x100f8830 0x30>; |
| 635 |
clocks = <&gcc USB30_0_MASTER_CLK>; |
| 636 |
clock-names = "ref"; |
| 637 |
#phy-cells = <0>; |
| 638 |
|
| 639 |
status = "disabled"; |
| 640 |
}; |
| 641 |
|
| 642 |
usb3_1: usb@110f8800 { |
| 643 |
compatible = "qcom,ipq8064-dwc3", "qcom,dwc3"; |
| 644 |
#address-cells = <1>; |
| 645 |
#size-cells = <1>; |
| 646 |
reg = <0x110f8800 0x8000>; |
| 647 |
clocks = <&gcc USB30_1_MASTER_CLK>; |
| 648 |
clock-names = "core"; |
| 649 |
|
| 650 |
ranges; |
| 651 |
|
| 652 |
resets = <&gcc USB30_1_MASTER_RESET>; |
| 653 |
|
| 654 |
status = "disabled"; |
| 655 |
|
| 656 |
dwc3_1: usb@11000000 { |
| 657 |
compatible = "snps,dwc3"; |
| 658 |
reg = <0x11000000 0xcd00>; |
| 659 |
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; |
| 660 |
phys = <&hs_phy_1>, <&ss_phy_1>; |
| 661 |
phy-names = "usb2-phy", "usb3-phy"; |
| 662 |
dr_mode = "host"; |
| 663 |
snps,dis_u3_susphy_quirk; |
| 664 |
}; |
| 665 |
}; |
| 666 |
|
| 667 |
hs_phy_1: phy@110f8800 { |
| 668 |
compatible = "qcom,ipq806x-usb-phy-hs"; |
| 669 |
reg = <0x110f8800 0x30>; |
| 670 |
clocks = <&gcc USB30_1_UTMI_CLK>; |
| 671 |
clock-names = "ref"; |
| 672 |
#phy-cells = <0>; |
| 673 |
|
| 674 |
status = "disabled"; |
| 675 |
}; |
| 676 |
|
| 677 |
ss_phy_1: phy@110f8830 { |
| 678 |
compatible = "qcom,ipq806x-usb-phy-ss"; |
| 679 |
reg = <0x110f8830 0x30>; |
| 680 |
clocks = <&gcc USB30_1_MASTER_CLK>; |
| 681 |
clock-names = "ref"; |
| 682 |
#phy-cells = <0>; |
| 683 |
|
| 684 |
status = "disabled"; |
| 685 |
}; |
| 686 |
|
| 687 |
sdcc3bam: dma-controller@12182000 { |
| 688 |
compatible = "qcom,bam-v1.3.0"; |
| 689 |
reg = <0x12182000 0x8000>; |
| 690 |
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| 691 |
clocks = <&gcc SDC3_H_CLK>; |
| 692 |
clock-names = "bam_clk"; |
| 693 |
#dma-cells = <1>; |
| 694 |
qcom,ee = <0>; |
| 695 |
}; |
| 696 |
|
| 697 |
sdcc1bam: dma-controller@12402000 { |
| 698 |
compatible = "qcom,bam-v1.3.0"; |
| 699 |
reg = <0x12402000 0x8000>; |
| 700 |
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; |
| 701 |
clocks = <&gcc SDC1_H_CLK>; |
| 702 |
clock-names = "bam_clk"; |
| 703 |
#dma-cells = <1>; |
| 704 |
qcom,ee = <0>; |
| 705 |
}; |
| 706 |
|
| 707 |
amba: amba { |
| 708 |
compatible = "simple-bus"; |
| 709 |
#address-cells = <1>; |
| 710 |
#size-cells = <1>; |
| 711 |
ranges; |
| 712 |
|
| 713 |
sdcc3: mmc@12180000 { |
| 714 |
compatible = "arm,pl18x", "arm,primecell"; |
| 715 |
arm,primecell-periphid = <0x00051180>; |
| 716 |
status = "disabled"; |
| 717 |
reg = <0x12180000 0x2000>; |
| 718 |
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; |
| 719 |
clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; |
| 720 |
clock-names = "mclk", "apb_pclk"; |
| 721 |
bus-width = <8>; |
| 722 |
cap-sd-highspeed; |
| 723 |
cap-mmc-highspeed; |
| 724 |
max-frequency = <192000000>; |
| 725 |
sd-uhs-sdr104; |
| 726 |
sd-uhs-ddr50; |
| 727 |
vqmmc-supply = <&vsdcc_fixed>; |
| 728 |
dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; |
| 729 |
dma-names = "tx", "rx"; |
| 730 |
}; |
| 731 |
|
| 732 |
sdcc1: mmc@12400000 { |
| 733 |
status = "disabled"; |
| 734 |
compatible = "arm,pl18x", "arm,primecell"; |
| 735 |
arm,primecell-periphid = <0x00051180>; |
| 736 |
reg = <0x12400000 0x2000>; |
| 737 |
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; |
| 738 |
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; |
| 739 |
clock-names = "mclk", "apb_pclk"; |
| 740 |
bus-width = <8>; |
| 741 |
max-frequency = <96000000>; |
| 742 |
non-removable; |
| 743 |
cap-sd-highspeed; |
| 744 |
cap-mmc-highspeed; |
| 745 |
vmmc-supply = <&vsdcc_fixed>; |
| 746 |
dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; |
| 747 |
dma-names = "tx", "rx"; |
| 748 |
}; |
| 749 |
}; |
| 750 |
|
| 751 |
gsbi1: gsbi@12440000 { |
| 752 |
compatible = "qcom,gsbi-v1.0.0"; |
| 753 |
reg = <0x12440000 0x100>; |
| 754 |
cell-index = <1>; |
| 755 |
clocks = <&gcc GSBI1_H_CLK>; |
| 756 |
clock-names = "iface"; |
| 757 |
#address-cells = <1>; |
| 758 |
#size-cells = <1>; |
| 759 |
ranges; |
| 760 |
|
| 761 |
syscon-tcsr = <&tcsr>; |
| 762 |
|
| 763 |
status = "disabled"; |
| 764 |
|
| 765 |
gsbi1_serial: serial@12450000 { |
| 766 |
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; |
| 767 |
reg = <0x12450000 0x100>, |
| 768 |
<0x12400000 0x03>; |
| 769 |
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; |
| 770 |
clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>; |
| 771 |
clock-names = "core", "iface"; |
| 772 |
|
| 773 |
status = "disabled"; |
| 774 |
}; |
| 775 |
|
| 776 |
gsbi1_i2c: i2c@12460000 { |
| 777 |
compatible = "qcom,i2c-qup-v1.1.1"; |
| 778 |
reg = <0x12460000 0x1000>; |
| 779 |
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; |
| 780 |
clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; |
| 781 |
clock-names = "core", "iface"; |
| 782 |
#address-cells = <1>; |
| 783 |
#size-cells = <0>; |
| 784 |
|
| 785 |
status = "disabled"; |
| 786 |
}; |
| 787 |
}; |
| 788 |
|
| 789 |
gsbi2: gsbi@12480000 { |
| 790 |
compatible = "qcom,gsbi-v1.0.0"; |
| 791 |
cell-index = <2>; |
| 792 |
reg = <0x12480000 0x100>; |
| 793 |
clocks = <&gcc GSBI2_H_CLK>; |
| 794 |
clock-names = "iface"; |
| 795 |
#address-cells = <1>; |
| 796 |
#size-cells = <1>; |
| 797 |
ranges; |
| 798 |
status = "disabled"; |
| 799 |
|
| 800 |
syscon-tcsr = <&tcsr>; |
| 801 |
|
| 802 |
gsbi2_serial: serial@12490000 { |
| 803 |
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; |
| 804 |
reg = <0x12490000 0x1000>, |
| 805 |
<0x12480000 0x1000>; |
| 806 |
interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; |
| 807 |
clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>; |
| 808 |
clock-names = "core", "iface"; |
| 809 |
status = "disabled"; |
| 810 |
}; |
| 811 |
|
| 812 |
gsbi2_i2c: i2c@124a0000 { |
| 813 |
compatible = "qcom,i2c-qup-v1.1.1"; |
| 814 |
reg = <0x124a0000 0x1000>; |
| 815 |
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; |
| 816 |
|
| 817 |
clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; |
| 818 |
clock-names = "core", "iface"; |
| 819 |
status = "disabled"; |
| 820 |
|
| 821 |
#address-cells = <1>; |
| 822 |
#size-cells = <0>; |
| 823 |
}; |
| 824 |
}; |
| 825 |
|
| 826 |
gsbi4: gsbi@16300000 { |
| 827 |
compatible = "qcom,gsbi-v1.0.0"; |
| 828 |
cell-index = <4>; |
| 829 |
reg = <0x16300000 0x100>; |
| 830 |
clocks = <&gcc GSBI4_H_CLK>; |
| 831 |
clock-names = "iface"; |
| 832 |
#address-cells = <1>; |
| 833 |
#size-cells = <1>; |
| 834 |
ranges; |
| 835 |
status = "disabled"; |
| 836 |
|
| 837 |
syscon-tcsr = <&tcsr>; |
| 838 |
|
| 839 |
gsbi4_serial: serial@16340000 { |
| 840 |
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; |
| 841 |
reg = <0x16340000 0x1000>, |
| 842 |
<0x16300000 0x1000>; |
| 843 |
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; |
| 844 |
clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; |
| 845 |
clock-names = "core", "iface"; |
| 846 |
status = "disabled"; |
| 847 |
}; |
| 848 |
|
| 849 |
i2c@16380000 { |
| 850 |
compatible = "qcom,i2c-qup-v1.1.1"; |
| 851 |
reg = <0x16380000 0x1000>; |
| 852 |
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; |
| 853 |
|
| 854 |
clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>; |
| 855 |
clock-names = "core", "iface"; |
| 856 |
status = "disabled"; |
| 857 |
|
| 858 |
#address-cells = <1>; |
| 859 |
#size-cells = <0>; |
| 860 |
}; |
| 861 |
}; |
| 862 |
|
| 863 |
gsbi6: gsbi@16500000 { |
| 864 |
compatible = "qcom,gsbi-v1.0.0"; |
| 865 |
reg = <0x16500000 0x100>; |
| 866 |
cell-index = <6>; |
| 867 |
clocks = <&gcc GSBI6_H_CLK>; |
| 868 |
clock-names = "iface"; |
| 869 |
#address-cells = <1>; |
| 870 |
#size-cells = <1>; |
| 871 |
ranges; |
| 872 |
|
| 873 |
syscon-tcsr = <&tcsr>; |
| 874 |
|
| 875 |
status = "disabled"; |
| 876 |
|
| 877 |
gsbi6_i2c: i2c@16580000 { |
| 878 |
compatible = "qcom,i2c-qup-v1.1.1"; |
| 879 |
reg = <0x16580000 0x1000>; |
| 880 |
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; |
| 881 |
|
| 882 |
clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>; |
| 883 |
clock-names = "core", "iface"; |
| 884 |
|
| 885 |
#address-cells = <1>; |
| 886 |
#size-cells = <0>; |
| 887 |
|
| 888 |
status = "disabled"; |
| 889 |
}; |
| 890 |
|
| 891 |
gsbi6_spi: spi@16580000 { |
| 892 |
compatible = "qcom,spi-qup-v1.1.1"; |
| 893 |
reg = <0x16580000 0x1000>; |
| 894 |
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; |
| 895 |
|
| 896 |
clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>; |
| 897 |
clock-names = "core", "iface"; |
| 898 |
|
| 899 |
#address-cells = <1>; |
| 900 |
#size-cells = <0>; |
| 901 |
|
| 902 |
status = "disabled"; |
| 903 |
}; |
| 904 |
}; |
| 905 |
|
| 906 |
gsbi7: gsbi@16600000 { |
| 907 |
status = "disabled"; |
| 908 |
compatible = "qcom,gsbi-v1.0.0"; |
| 909 |
cell-index = <7>; |
| 910 |
reg = <0x16600000 0x100>; |
| 911 |
clocks = <&gcc GSBI7_H_CLK>; |
| 912 |
clock-names = "iface"; |
| 913 |
#address-cells = <1>; |
| 914 |
#size-cells = <1>; |
| 915 |
ranges; |
| 916 |
syscon-tcsr = <&tcsr>; |
| 917 |
|
| 918 |
gsbi7_serial: serial@16640000 { |
| 919 |
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; |
| 920 |
reg = <0x16640000 0x1000>, |
| 921 |
<0x16600000 0x1000>; |
| 922 |
interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; |
| 923 |
clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>; |
| 924 |
clock-names = "core", "iface"; |
| 925 |
status = "disabled"; |
| 926 |
}; |
| 927 |
|
| 928 |
gsbi7_i2c: i2c@16680000 { |
| 929 |
compatible = "qcom,i2c-qup-v1.1.1"; |
| 930 |
reg = <0x16680000 0x1000>; |
| 931 |
interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; |
| 932 |
|
| 933 |
clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>; |
| 934 |
clock-names = "core", "iface"; |
| 935 |
|
| 936 |
#address-cells = <1>; |
| 937 |
#size-cells = <0>; |
| 938 |
|
| 939 |
status = "disabled"; |
| 940 |
}; |
| 941 |
}; |
| 942 |
|
| 943 |
adm_dma: dma-controller@18300000 { |
| 944 |
compatible = "qcom,adm"; |
| 945 |
reg = <0x18300000 0x100000>; |
| 946 |
interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; |
| 947 |
#dma-cells = <1>; |
| 948 |
|
| 949 |
clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>; |
| 950 |
clock-names = "core", "iface"; |
| 951 |
|
| 952 |
resets = <&gcc ADM0_RESET>, |
| 953 |
<&gcc ADM0_PBUS_RESET>, |
| 954 |
<&gcc ADM0_C0_RESET>, |
| 955 |
<&gcc ADM0_C1_RESET>, |
| 956 |
<&gcc ADM0_C2_RESET>; |
| 957 |
reset-names = "clk", "pbus", "c0", "c1", "c2"; |
| 958 |
qcom,ee = <0>; |
| 959 |
|
| 960 |
status = "disabled"; |
| 961 |
}; |
| 962 |
|
| 963 |
gsbi5: gsbi@1a200000 { |
| 964 |
compatible = "qcom,gsbi-v1.0.0"; |
| 965 |
cell-index = <5>; |
| 966 |
reg = <0x1a200000 0x100>; |
| 967 |
clocks = <&gcc GSBI5_H_CLK>; |
| 968 |
clock-names = "iface"; |
| 969 |
#address-cells = <1>; |
| 970 |
|
| 971 |
#size-cells = <1>; |
| 972 |
ranges; |
| 973 |
status = "disabled"; |
| 974 |
|
| 975 |
syscon-tcsr = <&tcsr>; |
| 976 |
|
| 977 |
gsbi5_serial: serial@1a240000 { |
| 978 |
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; |
| 979 |
reg = <0x1a240000 0x1000>, |
| 980 |
<0x1a200000 0x1000>; |
| 981 |
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; |
| 982 |
clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; |
| 983 |
clock-names = "core", "iface"; |
| 984 |
status = "disabled"; |
| 985 |
}; |
| 986 |
|
| 987 |
i2c@1a280000 { |
| 988 |
compatible = "qcom,i2c-qup-v1.1.1"; |
| 989 |
reg = <0x1a280000 0x1000>; |
| 990 |
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; |
| 991 |
|
| 992 |
clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; |
| 993 |
clock-names = "core", "iface"; |
| 994 |
status = "disabled"; |
| 995 |
|
| 996 |
#address-cells = <1>; |
| 997 |
#size-cells = <0>; |
| 998 |
}; |
| 999 |
|
| 1000 |
spi@1a280000 { |
| 1001 |
compatible = "qcom,spi-qup-v1.1.1"; |
| 1002 |
reg = <0x1a280000 0x1000>; |
| 1003 |
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; |
| 1004 |
|
| 1005 |
clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; |
| 1006 |
clock-names = "core", "iface"; |
| 1007 |
status = "disabled"; |
| 1008 |
|
| 1009 |
#address-cells = <1>; |
| 1010 |
#size-cells = <0>; |
| 1011 |
}; |
| 1012 |
}; |
| 1013 |
|
| 1014 |
tcsr: syscon@1a400000 { |
| 1015 |
compatible = "qcom,tcsr-ipq8064", "syscon"; |
| 1016 |
reg = <0x1a400000 0x100>; |
| 1017 |
}; |
| 1018 |
|
| 1019 |
rng@1a500000 { |
| 1020 |
compatible = "qcom,prng"; |
| 1021 |
reg = <0x1a500000 0x200>; |
| 1022 |
clocks = <&gcc PRNG_CLK>; |
| 1023 |
clock-names = "core"; |
| 1024 |
}; |
| 1025 |
|
| 1026 |
nand: nand-controller@1ac00000 { |
| 1027 |
compatible = "qcom,ipq806x-nand"; |
| 1028 |
reg = <0x1ac00000 0x800>; |
| 1029 |
|
| 1030 |
pinctrl-0 = <&nand_pins>; |
| 1031 |
pinctrl-names = "default"; |
| 1032 |
|
| 1033 |
clocks = <&gcc EBI2_CLK>, |
| 1034 |
<&gcc EBI2_AON_CLK>; |
| 1035 |
clock-names = "core", "aon"; |
| 1036 |
|
| 1037 |
dmas = <&adm_dma 3>; |
| 1038 |
dma-names = "rxtx"; |
| 1039 |
qcom,cmd-crci = <15>; |
| 1040 |
qcom,data-crci = <3>; |
| 1041 |
|
| 1042 |
#address-cells = <1>; |
| 1043 |
#size-cells = <0>; |
| 1044 |
|
| 1045 |
status = "disabled"; |
| 1046 |
}; |
| 1047 |
|
| 1048 |
sata_phy: sata-phy@1b400000 { |
| 1049 |
compatible = "qcom,ipq806x-sata-phy"; |
| 1050 |
reg = <0x1b400000 0x200>; |
| 1051 |
|
| 1052 |
clocks = <&gcc SATA_PHY_CFG_CLK>; |
| 1053 |
clock-names = "cfg"; |
| 1054 |
|
| 1055 |
#phy-cells = <0>; |
| 1056 |
status = "disabled"; |
| 1057 |
}; |
| 1058 |
|
| 1059 |
pcie0: pcie@1b500000 { |
| 1060 |
compatible = "qcom,pcie-ipq8064"; |
| 1061 |
reg = <0x1b500000 0x1000 |
| 1062 |
0x1b502000 0x80 |
| 1063 |
0x1b600000 0x100 |
| 1064 |
0x0ff00000 0x100000>; |
| 1065 |
reg-names = "dbi", "elbi", "parf", "config"; |
| 1066 |
device_type = "pci"; |
| 1067 |
linux,pci-domain = <0>; |
| 1068 |
bus-range = <0x00 0xff>; |
| 1069 |
num-lanes = <1>; |
| 1070 |
#address-cells = <3>; |
| 1071 |
#size-cells = <2>; |
| 1072 |
|
| 1073 |
ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00010000 /* I/O */ |
| 1074 |
0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* MEM */ |
| 1075 |
|
| 1076 |
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| 1077 |
interrupt-names = "msi"; |
| 1078 |
#interrupt-cells = <1>; |
| 1079 |
interrupt-map-mask = <0 0 0 0x7>; |
| 1080 |
interrupt-map = <0 0 0 1 &intc GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ |
| 1081 |
<0 0 0 2 &intc GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ |
| 1082 |
<0 0 0 3 &intc GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ |
| 1083 |
<0 0 0 4 &intc GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ |
| 1084 |
|
| 1085 |
clocks = <&gcc PCIE_A_CLK>, |
| 1086 |
<&gcc PCIE_H_CLK>, |
| 1087 |
<&gcc PCIE_PHY_CLK>, |
| 1088 |
<&gcc PCIE_AUX_CLK>, |
| 1089 |
<&gcc PCIE_ALT_REF_CLK>; |
| 1090 |
clock-names = "core", "iface", "phy", "aux", "ref"; |
| 1091 |
|
| 1092 |
assigned-clocks = <&gcc PCIE_ALT_REF_CLK>; |
| 1093 |
assigned-clock-rates = <100000000>; |
| 1094 |
|
| 1095 |
resets = <&gcc PCIE_ACLK_RESET>, |
| 1096 |
<&gcc PCIE_HCLK_RESET>, |
| 1097 |
<&gcc PCIE_POR_RESET>, |
| 1098 |
<&gcc PCIE_PCI_RESET>, |
| 1099 |
<&gcc PCIE_PHY_RESET>, |
| 1100 |
<&gcc PCIE_EXT_RESET>; |
| 1101 |
reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; |
| 1102 |
|
| 1103 |
pinctrl-0 = <&pcie0_pins>; |
| 1104 |
pinctrl-names = "default"; |
| 1105 |
|
| 1106 |
status = "disabled"; |
| 1107 |
perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; |
| 1108 |
|
| 1109 |
pcie@0 { |
| 1110 |
device_type = "pci"; |
| 1111 |
reg = <0x0 0x0 0x0 0x0 0x0>; |
| 1112 |
bus-range = <0x01 0xff>; |
| 1113 |
|
| 1114 |
#address-cells = <3>; |
| 1115 |
#size-cells = <2>; |
| 1116 |
ranges; |
| 1117 |
}; |
| 1118 |
}; |
| 1119 |
|
| 1120 |
pcie1: pcie@1b700000 { |
| 1121 |
compatible = "qcom,pcie-ipq8064"; |
| 1122 |
reg = <0x1b700000 0x1000 |
| 1123 |
0x1b702000 0x80 |
| 1124 |
0x1b800000 0x100 |
| 1125 |
0x31f00000 0x100000>; |
| 1126 |
reg-names = "dbi", "elbi", "parf", "config"; |
| 1127 |
device_type = "pci"; |
| 1128 |
linux,pci-domain = <1>; |
| 1129 |
bus-range = <0x00 0xff>; |
| 1130 |
num-lanes = <1>; |
| 1131 |
#address-cells = <3>; |
| 1132 |
#size-cells = <2>; |
| 1133 |
|
| 1134 |
ranges = <0x81000000 0x0 0x00000000 0x31e00000 0x0 0x00010000 /* I/O */ |
| 1135 |
0x82000000 0x0 0x2e000000 0x2e000000 0x0 0x03e00000>; /* MEM */ |
| 1136 |
|
| 1137 |
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; |
| 1138 |
interrupt-names = "msi"; |
| 1139 |
#interrupt-cells = <1>; |
| 1140 |
interrupt-map-mask = <0 0 0 0x7>; |
| 1141 |
interrupt-map = <0 0 0 1 &intc GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ |
| 1142 |
<0 0 0 2 &intc GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ |
| 1143 |
<0 0 0 3 &intc GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ |
| 1144 |
<0 0 0 4 &intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ |
| 1145 |
|
| 1146 |
clocks = <&gcc PCIE_1_A_CLK>, |
| 1147 |
<&gcc PCIE_1_H_CLK>, |
| 1148 |
<&gcc PCIE_1_PHY_CLK>, |
| 1149 |
<&gcc PCIE_1_AUX_CLK>, |
| 1150 |
<&gcc PCIE_1_ALT_REF_CLK>; |
| 1151 |
clock-names = "core", "iface", "phy", "aux", "ref"; |
| 1152 |
|
| 1153 |
assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>; |
| 1154 |
assigned-clock-rates = <100000000>; |
| 1155 |
|
| 1156 |
resets = <&gcc PCIE_1_ACLK_RESET>, |
| 1157 |
<&gcc PCIE_1_HCLK_RESET>, |
| 1158 |
<&gcc PCIE_1_POR_RESET>, |
| 1159 |
<&gcc PCIE_1_PCI_RESET>, |
| 1160 |
<&gcc PCIE_1_PHY_RESET>, |
| 1161 |
<&gcc PCIE_1_EXT_RESET>; |
| 1162 |
reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; |
| 1163 |
|
| 1164 |
pinctrl-0 = <&pcie1_pins>; |
| 1165 |
pinctrl-names = "default"; |
| 1166 |
|
| 1167 |
status = "disabled"; |
| 1168 |
perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; |
| 1169 |
|
| 1170 |
pcie@0 { |
| 1171 |
device_type = "pci"; |
| 1172 |
reg = <0x0 0x0 0x0 0x0 0x0>; |
| 1173 |
bus-range = <0x01 0xff>; |
| 1174 |
|
| 1175 |
#address-cells = <3>; |
| 1176 |
#size-cells = <2>; |
| 1177 |
ranges; |
| 1178 |
}; |
| 1179 |
}; |
| 1180 |
|
| 1181 |
pcie2: pcie@1b900000 { |
| 1182 |
compatible = "qcom,pcie-ipq8064"; |
| 1183 |
reg = <0x1b900000 0x1000 |
| 1184 |
0x1b902000 0x80 |
| 1185 |
0x1ba00000 0x100 |
| 1186 |
0x35f00000 0x100000>; |
| 1187 |
reg-names = "dbi", "elbi", "parf", "config"; |
| 1188 |
device_type = "pci"; |
| 1189 |
linux,pci-domain = <2>; |
| 1190 |
bus-range = <0x00 0xff>; |
| 1191 |
num-lanes = <1>; |
| 1192 |
#address-cells = <3>; |
| 1193 |
#size-cells = <2>; |
| 1194 |
|
| 1195 |
ranges = <0x81000000 0x0 0x00000000 0x35e00000 0x0 0x00010000 /* I/O */ |
| 1196 |
0x82000000 0x0 0x32000000 0x32000000 0x0 0x03e00000>; /* MEM */ |
| 1197 |
|
| 1198 |
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| 1199 |
interrupt-names = "msi"; |
| 1200 |
#interrupt-cells = <1>; |
| 1201 |
interrupt-map-mask = <0 0 0 0x7>; |
| 1202 |
interrupt-map = <0 0 0 1 &intc GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ |
| 1203 |
<0 0 0 2 &intc GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ |
| 1204 |
<0 0 0 3 &intc GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ |
| 1205 |
<0 0 0 4 &intc GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ |
| 1206 |
|
| 1207 |
clocks = <&gcc PCIE_2_A_CLK>, |
| 1208 |
<&gcc PCIE_2_H_CLK>, |
| 1209 |
<&gcc PCIE_2_PHY_CLK>, |
| 1210 |
<&gcc PCIE_2_AUX_CLK>, |
| 1211 |
<&gcc PCIE_2_ALT_REF_CLK>; |
| 1212 |
clock-names = "core", "iface", "phy", "aux", "ref"; |
| 1213 |
|
| 1214 |
assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>; |
| 1215 |
assigned-clock-rates = <100000000>; |
| 1216 |
|
| 1217 |
resets = <&gcc PCIE_2_ACLK_RESET>, |
| 1218 |
<&gcc PCIE_2_HCLK_RESET>, |
| 1219 |
<&gcc PCIE_2_POR_RESET>, |
| 1220 |
<&gcc PCIE_2_PCI_RESET>, |
| 1221 |
<&gcc PCIE_2_PHY_RESET>, |
| 1222 |
<&gcc PCIE_2_EXT_RESET>; |
| 1223 |
reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; |
| 1224 |
|
| 1225 |
pinctrl-0 = <&pcie2_pins>; |
| 1226 |
pinctrl-names = "default"; |
| 1227 |
|
| 1228 |
status = "disabled"; |
| 1229 |
perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>; |
| 1230 |
|
| 1231 |
pcie@0 { |
| 1232 |
device_type = "pci"; |
| 1233 |
reg = <0x0 0x0 0x0 0x0 0x0>; |
| 1234 |
bus-range = <0x01 0xff>; |
| 1235 |
|
| 1236 |
#address-cells = <3>; |
| 1237 |
#size-cells = <2>; |
| 1238 |
ranges; |
| 1239 |
}; |
| 1240 |
}; |
| 1241 |
|
| 1242 |
qsgmii_csr: syscon@1bb00000 { |
| 1243 |
compatible = "syscon"; |
| 1244 |
reg = <0x1bb00000 0x000001FF>; |
| 1245 |
}; |
| 1246 |
|
| 1247 |
lcc: clock-controller@28000000 { |
| 1248 |
compatible = "qcom,lcc-ipq8064"; |
| 1249 |
reg = <0x28000000 0x1000>; |
| 1250 |
#clock-cells = <1>; |
| 1251 |
#reset-cells = <1>; |
| 1252 |
}; |
| 1253 |
|
| 1254 |
lpass@28100000 { |
| 1255 |
compatible = "qcom,lpass-cpu"; |
| 1256 |
status = "disabled"; |
| 1257 |
clocks = <&lcc AHBIX_CLK>, |
| 1258 |
<&lcc MI2S_OSR_CLK>, |
| 1259 |
<&lcc MI2S_BIT_CLK>; |
| 1260 |
clock-names = "ahbix-clk", |
| 1261 |
"mi2s-osr-clk", |
| 1262 |
"mi2s-bit-clk"; |
| 1263 |
interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>; |
| 1264 |
interrupt-names = "lpass-irq-lpaif"; |
| 1265 |
reg = <0x28100000 0x10000>; |
| 1266 |
reg-names = "lpass-lpaif"; |
| 1267 |
}; |
| 1268 |
|
| 1269 |
sata: sata@29000000 { |
| 1270 |
compatible = "qcom,ipq806x-ahci", "generic-ahci"; |
| 1271 |
reg = <0x29000000 0x180>; |
| 1272 |
|
| 1273 |
interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; |
| 1274 |
|
| 1275 |
clocks = <&gcc SFAB_SATA_S_H_CLK>, |
| 1276 |
<&gcc SATA_H_CLK>, |
| 1277 |
<&gcc SATA_A_CLK>, |
| 1278 |
<&gcc SATA_RXOOB_CLK>, |
| 1279 |
<&gcc SATA_PMALIVE_CLK>; |
| 1280 |
clock-names = "slave_iface", "iface", "core", |
| 1281 |
"rxoob", "pmalive"; |
| 1282 |
|
| 1283 |
assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>; |
| 1284 |
assigned-clock-rates = <100000000>, <100000000>; |
| 1285 |
|
| 1286 |
phys = <&sata_phy>; |
| 1287 |
phy-names = "sata-phy"; |
| 1288 |
status = "disabled"; |
| 1289 |
}; |
| 1290 |
|
| 1291 |
gmac0: ethernet@37000000 { |
| 1292 |
device_type = "network"; |
| 1293 |
compatible = "qcom,ipq806x-gmac", "snps,dwmac"; |
| 1294 |
reg = <0x37000000 0x200000>; |
| 1295 |
interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; |
| 1296 |
interrupt-names = "macirq"; |
| 1297 |
|
| 1298 |
snps,axi-config = <&stmmac_axi_setup>; |
| 1299 |
snps,pbl = <32>; |
| 1300 |
snps,aal; |
| 1301 |
|
| 1302 |
qcom,nss-common = <&nss_common>; |
| 1303 |
qcom,qsgmii-csr = <&qsgmii_csr>; |
| 1304 |
|
| 1305 |
clocks = <&gcc GMAC_CORE1_CLK>; |
| 1306 |
clock-names = "stmmaceth"; |
| 1307 |
|
| 1308 |
resets = <&gcc GMAC_CORE1_RESET>, |
| 1309 |
<&gcc GMAC_AHB_RESET>; |
| 1310 |
reset-names = "stmmaceth", "ahb"; |
| 1311 |
|
| 1312 |
status = "disabled"; |
| 1313 |
}; |
| 1314 |
|
| 1315 |
gmac1: ethernet@37200000 { |
| 1316 |
device_type = "network"; |
| 1317 |
compatible = "qcom,ipq806x-gmac", "snps,dwmac"; |
| 1318 |
reg = <0x37200000 0x200000>; |
| 1319 |
interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; |
| 1320 |
interrupt-names = "macirq"; |
| 1321 |
|
| 1322 |
snps,axi-config = <&stmmac_axi_setup>; |
| 1323 |
snps,pbl = <32>; |
| 1324 |
snps,aal; |
| 1325 |
|
| 1326 |
qcom,nss-common = <&nss_common>; |
| 1327 |
qcom,qsgmii-csr = <&qsgmii_csr>; |
| 1328 |
|
| 1329 |
clocks = <&gcc GMAC_CORE2_CLK>; |
| 1330 |
clock-names = "stmmaceth"; |
| 1331 |
|
| 1332 |
resets = <&gcc GMAC_CORE2_RESET>, |
| 1333 |
<&gcc GMAC_AHB_RESET>; |
| 1334 |
reset-names = "stmmaceth", "ahb"; |
| 1335 |
|
| 1336 |
status = "disabled"; |
| 1337 |
}; |
| 1338 |
|
| 1339 |
gmac2: ethernet@37400000 { |
| 1340 |
device_type = "network"; |
| 1341 |
compatible = "qcom,ipq806x-gmac", "snps,dwmac"; |
| 1342 |
reg = <0x37400000 0x200000>; |
| 1343 |
interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; |
| 1344 |
interrupt-names = "macirq"; |
| 1345 |
|
| 1346 |
snps,axi-config = <&stmmac_axi_setup>; |
| 1347 |
snps,pbl = <32>; |
| 1348 |
snps,aal; |
| 1349 |
|
| 1350 |
qcom,nss-common = <&nss_common>; |
| 1351 |
qcom,qsgmii-csr = <&qsgmii_csr>; |
| 1352 |
|
| 1353 |
clocks = <&gcc GMAC_CORE3_CLK>; |
| 1354 |
clock-names = "stmmaceth"; |
| 1355 |
|
| 1356 |
resets = <&gcc GMAC_CORE3_RESET>, |
| 1357 |
<&gcc GMAC_AHB_RESET>; |
| 1358 |
reset-names = "stmmaceth", "ahb"; |
| 1359 |
|
| 1360 |
status = "disabled"; |
| 1361 |
}; |
| 1362 |
|
| 1363 |
gmac3: ethernet@37600000 { |
| 1364 |
device_type = "network"; |
| 1365 |
compatible = "qcom,ipq806x-gmac", "snps,dwmac"; |
| 1366 |
reg = <0x37600000 0x200000>; |
| 1367 |
interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; |
| 1368 |
interrupt-names = "macirq"; |
| 1369 |
|
| 1370 |
snps,axi-config = <&stmmac_axi_setup>; |
| 1371 |
snps,pbl = <32>; |
| 1372 |
snps,aal; |
| 1373 |
|
| 1374 |
qcom,nss-common = <&nss_common>; |
| 1375 |
qcom,qsgmii-csr = <&qsgmii_csr>; |
| 1376 |
|
| 1377 |
clocks = <&gcc GMAC_CORE4_CLK>; |
| 1378 |
clock-names = "stmmaceth"; |
| 1379 |
|
| 1380 |
resets = <&gcc GMAC_CORE4_RESET>, |
| 1381 |
<&gcc GMAC_AHB_RESET>; |
| 1382 |
reset-names = "stmmaceth", "ahb"; |
| 1383 |
|
| 1384 |
status = "disabled"; |
| 1385 |
}; |
| 1386 |
}; |
| 1387 |
}; |