| 1 |
// SPDX-License-Identifier: GPL-2.0+ OR MIT |
| 2 |
/* |
| 3 |
* Device Tree Source for mangOH Green Board with WP8548 Module |
| 4 |
* |
| 5 |
* Copyright (C) 2016 BayLibre, SAS. |
| 6 |
* Author : Neil Armstrong <[email protected]> |
| 7 |
*/ |
| 8 |
|
| 9 |
#include <dt-bindings/gpio/gpio.h> |
| 10 |
#include <dt-bindings/input/input.h> |
| 11 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 12 |
|
| 13 |
#include "qcom-mdm9615-wp8548.dtsi" |
| 14 |
|
| 15 |
/ { |
| 16 |
model = "MangOH Green with WP8548 Module"; |
| 17 |
compatible = "swir,mangoh-green-wp8548", "swir,wp8548", "qcom,mdm9615"; |
| 18 |
|
| 19 |
aliases { |
| 20 |
spi0 = &gsbi3_spi; |
| 21 |
serial0 = &gsbi4_serial; |
| 22 |
serial1 = &gsbi5_serial; |
| 23 |
i2c0 = &gsbi5_i2c; |
| 24 |
mmc0 = &sdcc1; |
| 25 |
}; |
| 26 |
|
| 27 |
chosen { |
| 28 |
stdout-path = "serial1:115200n8"; |
| 29 |
}; |
| 30 |
}; |
| 31 |
|
| 32 |
&msmgpio { |
| 33 |
/* MangOH GPIO Mapping : |
| 34 |
* - 2 : GPIOEXP_INT2 |
| 35 |
* - 7 : IOT1_GPIO2 |
| 36 |
* - 8 : IOT0_GPIO4 |
| 37 |
* - 13: IOT0_GPIO3 |
| 38 |
* - 21: IOT1_GPIO4 |
| 39 |
* - 22: IOT2_GPIO1 |
| 40 |
* - 23: IOT2_GPIO2 |
| 41 |
* - 24: IOT2_GPIO3 |
| 42 |
* - 25: IOT1_GPIO1 |
| 43 |
* - 32: IOT1_GPIO3 |
| 44 |
* - 33: IOT0_GPIO2 |
| 45 |
* - 42: IOT0_GPIO1 and SD Card Detect |
| 46 |
*/ |
| 47 |
|
| 48 |
gpioext1_pins: gpioext1-state { |
| 49 |
gpioext1-pins { |
| 50 |
pins = "gpio2"; |
| 51 |
function = "gpio"; |
| 52 |
bias-disable; |
| 53 |
}; |
| 54 |
}; |
| 55 |
|
| 56 |
sdc_cd_pins: sdc-cd-state { |
| 57 |
sdc-cd-pins { |
| 58 |
pins = "gpio42"; |
| 59 |
function = "gpio"; |
| 60 |
drive-strength = <2>; |
| 61 |
bias-pull-up; |
| 62 |
}; |
| 63 |
}; |
| 64 |
}; |
| 65 |
|
| 66 |
&gsbi3_spi { |
| 67 |
spi@0 { |
| 68 |
compatible = "swir,mangoh-iotport-spi"; |
| 69 |
spi-max-frequency = <24000000>; |
| 70 |
reg = <0>; |
| 71 |
}; |
| 72 |
}; |
| 73 |
|
| 74 |
&gsbi5_i2c { |
| 75 |
mux@71 { |
| 76 |
compatible = "nxp,pca9548"; |
| 77 |
#address-cells = <1>; |
| 78 |
#size-cells = <0>; |
| 79 |
reg = <0x71>; |
| 80 |
|
| 81 |
i2c_iot0: i2c@0 { |
| 82 |
#address-cells = <1>; |
| 83 |
#size-cells = <0>; |
| 84 |
reg = <0>; |
| 85 |
}; |
| 86 |
|
| 87 |
i2c_iot1: i2c@1 { |
| 88 |
#address-cells = <1>; |
| 89 |
#size-cells = <0>; |
| 90 |
reg = <1>; |
| 91 |
}; |
| 92 |
|
| 93 |
i2c_iot2: i2c@2 { |
| 94 |
#address-cells = <1>; |
| 95 |
#size-cells = <0>; |
| 96 |
reg = <2>; |
| 97 |
}; |
| 98 |
|
| 99 |
i2c@3 { |
| 100 |
#address-cells = <1>; |
| 101 |
#size-cells = <0>; |
| 102 |
reg = <3>; |
| 103 |
|
| 104 |
usbhub: hub@8 { |
| 105 |
compatible = "smsc,usb3503a"; |
| 106 |
reg = <0x8>; |
| 107 |
connect-gpios = <&gpioext2 1 GPIO_ACTIVE_HIGH>; |
| 108 |
intn-gpios = <&gpioext2 0 GPIO_ACTIVE_HIGH>; |
| 109 |
initial-mode = <1>; |
| 110 |
}; |
| 111 |
}; |
| 112 |
|
| 113 |
i2c@4 { |
| 114 |
#address-cells = <1>; |
| 115 |
#size-cells = <0>; |
| 116 |
reg = <4>; |
| 117 |
|
| 118 |
gpioext0: pinctrl@3e { |
| 119 |
/* GPIO Expander 0 Mapping : |
| 120 |
* - 0: ARDUINO_RESET_Level shift |
| 121 |
* - 1: BattChrgr_PG_N |
| 122 |
* - 2: BattGauge_GPIO |
| 123 |
* - 3: LED_ON (out active high) |
| 124 |
* - 4: ATmega_reset_GPIO |
| 125 |
* - 5: X |
| 126 |
* - 6: PCM_ANALOG_SELECT (out active high) |
| 127 |
* - 7: X |
| 128 |
* - 8: Board_rev_res1 (in) |
| 129 |
* - 9: Board_rev_res2 (in) |
| 130 |
* - 10: UART_EXP1_ENn (out active low / pull-down) |
| 131 |
* - 11: UART_EXP1_IN (out pull-down) |
| 132 |
* - 12: UART_EXP2_IN (out pull-down) |
| 133 |
* - 13: SDIO_SEL (out pull-down) |
| 134 |
* - 14: SPI_EXP1_ENn (out active low / pull-down) |
| 135 |
* - 15: SPI_EXP1_IN (out pull-down) |
| 136 |
*/ |
| 137 |
#gpio-cells = <2>; |
| 138 |
#interrupt-cells = <2>; |
| 139 |
compatible = "semtech,sx1509q"; |
| 140 |
reg = <0x3e>; |
| 141 |
interrupt-parent = <&gpioext1>; |
| 142 |
interrupts = <0 IRQ_TYPE_EDGE_FALLING>; |
| 143 |
|
| 144 |
semtech,probe-reset; |
| 145 |
|
| 146 |
gpio-controller; |
| 147 |
interrupt-controller; |
| 148 |
}; |
| 149 |
}; |
| 150 |
|
| 151 |
i2c@5 { |
| 152 |
#address-cells = <1>; |
| 153 |
#size-cells = <0>; |
| 154 |
reg = <5>; |
| 155 |
|
| 156 |
gpioext1: pinctrl@3f { |
| 157 |
/* GPIO Expander 1 Mapping : |
| 158 |
* - 0: GPIOEXP_INT1 |
| 159 |
* - 1: Battery detect |
| 160 |
* - 2: GPIO_SCF3_RESET |
| 161 |
* - 3: LED_CARD_DETECT_IOT0 (in) |
| 162 |
* - 4: LED_CARD_DETECT_IOT1 (in) |
| 163 |
* - 5: LED_CARD_DETECT_IOT2 (in) |
| 164 |
* - 6: UIM2_PWM_SELECT |
| 165 |
* - 7: UIM2_M2_S_SELECT |
| 166 |
* - 8: TP900 |
| 167 |
* - 9: SENSOR_INT1 (in) |
| 168 |
* - 10: SENSOR_INT2 (in) |
| 169 |
* - 11: CARD_DETECT_IOT0 (in pull-up) |
| 170 |
* - 12: CARD_DETECT_IOT2 (in pull-up) |
| 171 |
* - 13: CARD_DETECT_IOT1 (in pull-up) |
| 172 |
* - 14: GPIOEXP_INT3 (in active low / pull-up) |
| 173 |
* - 15: BattChrgr_INT_N |
| 174 |
*/ |
| 175 |
pinctrl-0 = <&gpioext1_pins>; |
| 176 |
pinctrl-names = "default"; |
| 177 |
|
| 178 |
#gpio-cells = <2>; |
| 179 |
#interrupt-cells = <2>; |
| 180 |
compatible = "semtech,sx1509q"; |
| 181 |
reg = <0x3f>; |
| 182 |
interrupt-parent = <&msmgpio>; |
| 183 |
interrupts = <0 IRQ_TYPE_EDGE_FALLING>; |
| 184 |
|
| 185 |
semtech,probe-reset; |
| 186 |
|
| 187 |
gpio-controller; |
| 188 |
interrupt-controller; |
| 189 |
}; |
| 190 |
}; |
| 191 |
|
| 192 |
i2c@6 { |
| 193 |
#address-cells = <1>; |
| 194 |
#size-cells = <0>; |
| 195 |
reg = <6>; |
| 196 |
|
| 197 |
gpioext2: pinctrl@70 { |
| 198 |
/* GPIO Expander 2 Mapping : |
| 199 |
* - 0: USB_HUB_INTn |
| 200 |
* - 1: HUB_CONNECT |
| 201 |
* - 2: GPIO_IOT2_RESET (out active low / pull-up) |
| 202 |
* - 3: GPIO_IOT1_RESET (out active low / pull-up) |
| 203 |
* - 4: GPIO_IOT0_RESET (out active low / pull-up) |
| 204 |
* - 5: TP901 |
| 205 |
* - 6: TP902 |
| 206 |
* - 7: TP903 |
| 207 |
* - 8: UART_EXP2_ENn (out active low / pull-down) |
| 208 |
* - 9: PCM_EXP1_ENn (out active low) |
| 209 |
* - 10: PCM_EXP1_SEL (out) |
| 210 |
* - 11: ARD_FTDI |
| 211 |
* - 12: TP904 |
| 212 |
* - 13: TP905 |
| 213 |
* - 14: TP906 |
| 214 |
* - 15: RS232_Enable (out active high / pull-up) |
| 215 |
*/ |
| 216 |
#gpio-cells = <2>; |
| 217 |
#interrupt-cells = <2>; |
| 218 |
compatible = "semtech,sx1509q"; |
| 219 |
reg = <0x70>; |
| 220 |
interrupt-parent = <&gpioext1>; |
| 221 |
interrupts = <14 IRQ_TYPE_EDGE_FALLING>; |
| 222 |
|
| 223 |
semtech,probe-reset; |
| 224 |
|
| 225 |
gpio-controller; |
| 226 |
interrupt-controller; |
| 227 |
}; |
| 228 |
}; |
| 229 |
|
| 230 |
i2c@7 { |
| 231 |
#address-cells = <1>; |
| 232 |
#size-cells = <0>; |
| 233 |
reg = <7>; |
| 234 |
}; |
| 235 |
}; |
| 236 |
}; |
| 237 |
|
| 238 |
&sdcc1 { |
| 239 |
pinctrl-0 = <&sdc_cd_pins>; |
| 240 |
pinctrl-names = "default"; |
| 241 |
disable-wp; |
| 242 |
cd-gpios = <&msmgpio 42 GPIO_ACTIVE_LOW>; /* Active low CD */ |
| 243 |
}; |