Debian Codegraph @

arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts

raw
1 // SPDX-License-Identifier: GPL-2.0
2 #include <dt-bindings/input/input.h>
3 #include <dt-bindings/reset/qcom,gcc-msm8960.h>
4
5 #include "qcom-msm8960.dtsi"
6 #include "pm8921.dtsi"
7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
9 #include <dt-bindings/input/gpio-keys.h>
10
11 / {
12 model = "Samsung Galaxy Express SGH-I437";
13 compatible = "samsung,expressatt", "qcom,msm8960";
14 chassis-type = "handset";
15
16 aliases {
17 serial0 = &gsbi5_serial;
18 mmc0 = &sdcc1; /* SDCC1 eMMC slot */
19 mmc1 = &sdcc3; /* SDCC3 SD card slot */
20 };
21
22 chosen {
23 stdout-path = "serial0:115200n8";
24 };
25
26 gpio-keys {
27 compatible = "gpio-keys";
28
29 pinctrl-names = "default";
30 pinctrl-0 = <&gpio_keys_pin_a>;
31
32 key-home {
33 label = "Home";
34 gpios = <&tlmm 40 GPIO_ACTIVE_LOW>;
35 debounce-interval = <5>;
36 linux,code = <KEY_HOMEPAGE>;
37 wakeup-event-action = <EV_ACT_ASSERTED>;
38 wakeup-source;
39 };
40
41 key-volume-up {
42 label = "Volume Up";
43 gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
44 debounce-interval = <5>;
45 linux,code = <KEY_VOLUMEUP>;
46 };
47
48 key-volume-down {
49 label = "Volume Down";
50 gpios = <&tlmm 81 GPIO_ACTIVE_LOW>;
51 debounce-interval = <5>;
52 linux,code = <KEY_VOLUMEDOWN>;
53 };
54 };
55 };
56
57 &gsbi2 {
58 qcom,mode = <GSBI_PROT_I2C>;
59
60 status = "okay";
61 };
62
63 &gsbi2_i2c {
64 status = "okay";
65
66 light-sensor@39 {
67 compatible = "amstaos,tmd2772";
68 reg = <0x39>;
69 interrupts-extended = <&pm8921_gpio 6 IRQ_TYPE_EDGE_FALLING>;
70 vdd-supply = <&pm8921_l9>;
71 vddio-supply = <&pm8921_lvs4>;
72
73 /* TODO: Proximity doesn't work */
74 amstaos,proximity-diodes = <0>;
75 led-max-microamp = <100000>;
76
77 pinctrl-0 = <&prox_sensor_int>;
78 pinctrl-names = "default";
79 };
80 };
81
82 &gsbi5 {
83 qcom,mode = <GSBI_PROT_I2C_UART>;
84 status = "okay";
85 };
86
87 &gsbi5_serial {
88 status = "okay";
89 };
90
91 &sdcc1 {
92 vmmc-supply = <&pm8921_l5>;
93 status = "okay";
94 };
95
96 &sdcc3 {
97 vmmc-supply = <&pm8921_l6>;
98 vqmmc-supply = <&pm8921_l7>;
99
100 pinctrl-0 = <&sdcc3_default_state>;
101 pinctrl-1 = <&sdcc3_sleep_state>;
102 pinctrl-names = "default", "sleep";
103
104 status = "okay";
105 };
106
107 &gsbi1 {
108 qcom,mode = <GSBI_PROT_SPI>;
109 pinctrl-0 = <&spi1_default>;
110 pinctrl-names = "default";
111 status = "okay";
112 };
113
114 &gsbi1_spi {
115 status = "okay";
116 };
117
118 &gsbi3 {
119 qcom,mode = <GSBI_PROT_I2C>;
120 status = "okay";
121 };
122
123 &gsbi3_i2c {
124 status = "okay";
125
126 // Atmel mXT224S touchscreen
127 touchscreen@4a {
128 compatible = "atmel,maxtouch";
129 reg = <0x4a>;
130 interrupt-parent = <&tlmm>;
131 interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
132 vdda-supply = <&pm8921_lvs6>;
133 vdd-supply = <&pm8921_l17>;
134 pinctrl-names = "default";
135 pinctrl-0 = <&touchscreen>;
136 };
137 };
138
139 &tlmm {
140 spi1_default: spi1-default-state {
141 mosi-pins {
142 pins = "gpio6";
143 function = "gsbi1";
144 drive-strength = <12>;
145 bias-disable;
146 };
147
148 miso-pins {
149 pins = "gpio7";
150 function = "gsbi1";
151 drive-strength = <12>;
152 bias-disable;
153 };
154
155 cs-pins {
156 pins = "gpio8";
157 function = "gsbi1";
158 drive-strength = <12>;
159 bias-disable;
160 output-low;
161 };
162
163 clk-pins {
164 pins = "gpio9";
165 function = "gsbi1";
166 drive-strength = <12>;
167 bias-disable;
168 };
169 };
170
171 gpio_keys_pin_a: gpio-keys-active-state {
172 pins = "gpio40", "gpio50", "gpio81";
173 function = "gpio";
174 drive-strength = <8>;
175 bias-disable;
176 };
177
178 touchscreen: touchscreen-int-state {
179 pins = "gpio11";
180 function = "gpio";
181 output-enable;
182 bias-disable;
183 drive-strength = <2>;
184 };
185
186 nfc_default: nfc-default-state {
187 irq-pins {
188 pins = "gpio106";
189 function = "gpio";
190 drive-strength = <2>;
191 bias-pull-down;
192 };
193
194 firmware-pins {
195 pins = "gpio92";
196 function = "gpio";
197 drive-strength = <2>;
198 bias-disable;
199 };
200 };
201 };
202
203 &pm8921 {
204 interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
205 };
206
207 &pm8921_gpio {
208 prox_sensor_int: prox-sensor-int-state {
209 pins = "gpio6";
210 function = "normal";
211 input-enable;
212 bias-disable;
213 };
214
215 nfc_enable: nfc-enable-state {
216 pins = "gpio21";
217 function = "normal";
218 bias-disable;
219 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
220 power-source = <PM8921_GPIO_S4>;
221 };
222 };
223
224 &rpm {
225 regulators {
226 compatible = "qcom,rpm-pm8921-regulators";
227 vin_lvs1_3_6-supply = <&pm8921_s4>;
228 vin_lvs2-supply = <&pm8921_s4>;
229 vin_lvs4_5_7-supply = <&pm8921_s4>;
230 vdd_ncp-supply = <&pm8921_l6>;
231 vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
232 vdd_l21_l23_l29-supply = <&pm8921_s8>;
233 vdd_l24-supply = <&pm8921_s1>;
234 vdd_l25-supply = <&pm8921_s1>;
235 vdd_l27-supply = <&pm8921_s7>;
236 vdd_l28-supply = <&pm8921_s7>;
237
238 /* Buck SMPS */
239 pm8921_s1: s1 {
240 regulator-always-on;
241 regulator-min-microvolt = <1225000>;
242 regulator-max-microvolt = <1225000>;
243 qcom,switch-mode-frequency = <3200000>;
244 bias-pull-down;
245 };
246
247 pm8921_s2: s2 {
248 regulator-min-microvolt = <1300000>;
249 regulator-max-microvolt = <1300000>;
250 qcom,switch-mode-frequency = <1600000>;
251 bias-pull-down;
252 };
253
254 pm8921_s3: s3 {
255 regulator-min-microvolt = <500000>;
256 regulator-max-microvolt = <1150000>;
257 qcom,switch-mode-frequency = <4800000>;
258 bias-pull-down;
259 };
260
261 pm8921_s4: s4 {
262 regulator-always-on;
263 regulator-min-microvolt = <1800000>;
264 regulator-max-microvolt = <1800000>;
265 qcom,switch-mode-frequency = <1600000>;
266 bias-pull-down;
267 qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
268 };
269
270 pm8921_s7: s7 {
271 regulator-min-microvolt = <1150000>;
272 regulator-max-microvolt = <1150000>;
273 qcom,switch-mode-frequency = <3200000>;
274 bias-pull-down;
275 };
276
277 pm8921_s8: s8 {
278 regulator-always-on;
279 regulator-min-microvolt = <2050000>;
280 regulator-max-microvolt = <2050000>;
281 qcom,switch-mode-frequency = <1600000>;
282 bias-pull-down;
283 };
284
285 /* PMOS LDO */
286 pm8921_l1: l1 {
287 regulator-always-on;
288 regulator-min-microvolt = <1050000>;
289 regulator-max-microvolt = <1050000>;
290 bias-pull-down;
291 };
292
293 pm8921_l2: l2 {
294 regulator-min-microvolt = <1200000>;
295 regulator-max-microvolt = <1200000>;
296 bias-pull-down;
297 };
298
299 pm8921_l3: l3 {
300 regulator-min-microvolt = <3075000>;
301 regulator-max-microvolt = <3300000>;
302 bias-pull-down;
303 };
304
305 pm8921_l4: l4 {
306 regulator-always-on;
307 regulator-min-microvolt = <1800000>;
308 regulator-max-microvolt = <1800000>;
309 bias-pull-down;
310 };
311
312 pm8921_l5: l5 {
313 regulator-min-microvolt = <2950000>;
314 regulator-max-microvolt = <2950000>;
315 bias-pull-down;
316 };
317
318 pm8921_l6: l6 {
319 regulator-min-microvolt = <2950000>;
320 regulator-max-microvolt = <2950000>;
321 bias-pull-down;
322 };
323
324 pm8921_l7: l7 {
325 regulator-always-on;
326 regulator-min-microvolt = <1850000>;
327 regulator-max-microvolt = <2950000>;
328 bias-pull-down;
329 };
330
331 pm8921_l8: l8 {
332 regulator-min-microvolt = <3000000>;
333 regulator-max-microvolt = <3100000>;
334 bias-pull-down;
335 };
336
337 pm8921_l9: l9 {
338 regulator-min-microvolt = <2850000>;
339 regulator-max-microvolt = <2850000>;
340 bias-pull-down;
341 };
342
343 pm8921_l10: l10 {
344 regulator-min-microvolt = <3000000>;
345 regulator-max-microvolt = <3000000>;
346 bias-pull-down;
347 };
348
349 pm8921_l11: l11 {
350 regulator-min-microvolt = <2800000>;
351 regulator-max-microvolt = <3300000>;
352 bias-pull-down;
353 };
354
355 pm8921_l12: l12 {
356 regulator-min-microvolt = <1200000>;
357 regulator-max-microvolt = <1200000>;
358 bias-pull-down;
359 };
360
361 pm8921_l14: l14 {
362 regulator-min-microvolt = <1800000>;
363 regulator-max-microvolt = <1800000>;
364 bias-pull-down;
365 };
366
367 pm8921_l15: l15 {
368 regulator-min-microvolt = <1800000>;
369 regulator-max-microvolt = <2950000>;
370 bias-pull-down;
371 };
372
373 pm8921_l16: l16 {
374 regulator-min-microvolt = <2800000>;
375 regulator-max-microvolt = <3000000>;
376 bias-pull-down;
377 };
378
379 pm8921_l17: l17 {
380 regulator-min-microvolt = <3300000>;
381 regulator-max-microvolt = <3300000>;
382 bias-pull-down;
383 };
384
385 pm8921_l18: l18 {
386 regulator-min-microvolt = <1200000>;
387 regulator-max-microvolt = <1500000>;
388 bias-pull-down;
389 };
390
391 pm8921_l21: l21 {
392 regulator-min-microvolt = <1900000>;
393 regulator-max-microvolt = <1900000>;
394 bias-pull-down;
395 };
396
397 pm8921_l22: l22 {
398 regulator-min-microvolt = <2750000>;
399 regulator-max-microvolt = <2750000>;
400 bias-pull-down;
401 };
402
403 pm8921_l23: l23 {
404 regulator-always-on;
405 regulator-min-microvolt = <1800000>;
406 regulator-max-microvolt = <1800000>;
407 bias-pull-down;
408 };
409
410 pm8921_l24: l24 {
411 regulator-min-microvolt = <750000>;
412 regulator-max-microvolt = <1150000>;
413 bias-pull-down;
414 };
415
416 pm8921_l25: l25 {
417 regulator-always-on;
418 regulator-min-microvolt = <1225000>;
419 regulator-max-microvolt = <1225000>;
420 bias-pull-down;
421 };
422
423 /* Low Voltage Switch */
424 pm8921_lvs1: lvs1 {
425 bias-pull-down;
426 };
427
428 pm8921_lvs2: lvs2 {
429 bias-pull-down;
430 };
431
432 pm8921_lvs3: lvs3 {
433 bias-pull-down;
434 };
435
436 pm8921_lvs4: lvs4 {
437 bias-pull-down;
438 };
439
440 pm8921_lvs5: lvs5 {
441 bias-pull-down;
442 };
443
444 pm8921_lvs6: lvs6 {
445 bias-pull-down;
446 };
447
448 pm8921_lvs7: lvs7 {
449 bias-pull-down;
450 };
451
452 pm8921_ncp: ncp {
453 regulator-min-microvolt = <1800000>;
454 regulator-max-microvolt = <1800000>;
455 qcom,switch-mode-frequency = <1600000>;
456 };
457 };
458 };
459
460 &usb_hs1_phy {
461 v3p3-supply = <&pm8921_l3>;
462 v1p8-supply = <&pm8921_l4>;
463 };
464
465 &usb1 {
466 dr_mode = "otg";
467 status = "okay";
468 };
469
470 &gsbi7 {
471 qcom,mode = <GSBI_PROT_I2C>;
472
473 status = "okay";
474 };
475
476 &gsbi7_i2c {
477 status = "okay";
478
479 nfc@2b {
480 compatible = "nxp,pn544-i2c";
481 reg = <0x2b>;
482 interrupts-extended = <&tlmm 106 IRQ_TYPE_EDGE_RISING>;
483 enable-gpios = <&pm8921_gpio 21 GPIO_ACTIVE_HIGH>;
484 firmware-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
485
486 pinctrl-0 = <&nfc_default &nfc_enable>;
487 pinctrl-names = "default";
488 };
489 };
490
491 &gsbi12 {
492 qcom,mode = <GSBI_PROT_I2C>;
493
494 status = "okay";
495 };
496
497 &gsbi12_i2c {
498 status = "okay";
499
500 accelerometer@18 {
501 compatible = "bosch,bma254";
502 reg = <0x18>;
503 vdd-supply = <&pm8921_l9>;
504 vddio-supply = <&pm8921_lvs4>;
505
506 mount-matrix = "-1", "0", "0",
507 "0", "-1", "0",
508 "0", "0", "1";
509 };
510
511 magnetometer@2e {
512 compatible = "yamaha,yas532";
513 reg = <0x2e>;
514 vdd-supply = <&pm8921_l9>;
515 iovdd-supply = <&pm8921_lvs4>;
516
517 /* TODO: Figure out Mount Matrix */
518 };
519 };