| 1 |
// SPDX-License-Identifier: GPL-2.0+ OR MIT |
| 2 |
/* |
| 3 |
* Device Tree Source for Qualcomm MDM9615 SoC |
| 4 |
* |
| 5 |
* Copyright (C) 2016 BayLibre, SAS. |
| 6 |
* Author : Neil Armstrong <[email protected]> |
| 7 |
*/ |
| 8 |
|
| 9 |
/dts-v1/; |
| 10 |
|
| 11 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 12 |
#include <dt-bindings/clock/qcom,gcc-mdm9615.h> |
| 13 |
#include <dt-bindings/clock/qcom,lcc-msm8960.h> |
| 14 |
#include <dt-bindings/reset/qcom,gcc-mdm9615.h> |
| 15 |
#include <dt-bindings/mfd/qcom-rpm.h> |
| 16 |
#include <dt-bindings/soc/qcom,gsbi.h> |
| 17 |
|
| 18 |
/ { |
| 19 |
#address-cells = <1>; |
| 20 |
#size-cells = <1>; |
| 21 |
model = "Qualcomm MDM9615"; |
| 22 |
compatible = "qcom,mdm9615"; |
| 23 |
interrupt-parent = <&intc>; |
| 24 |
|
| 25 |
cpus { |
| 26 |
#address-cells = <1>; |
| 27 |
#size-cells = <0>; |
| 28 |
|
| 29 |
cpu0: cpu@0 { |
| 30 |
compatible = "arm,cortex-a5"; |
| 31 |
reg = <0>; |
| 32 |
device_type = "cpu"; |
| 33 |
next-level-cache = <&l2>; |
| 34 |
}; |
| 35 |
}; |
| 36 |
|
| 37 |
cpu-pmu { |
| 38 |
compatible = "arm,cortex-a5-pmu"; |
| 39 |
interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; |
| 40 |
}; |
| 41 |
|
| 42 |
clocks { |
| 43 |
cxo_board: cxo_board { |
| 44 |
compatible = "fixed-clock"; |
| 45 |
#clock-cells = <0>; |
| 46 |
clock-frequency = <19200000>; |
| 47 |
}; |
| 48 |
}; |
| 49 |
|
| 50 |
vsdcc_fixed: vsdcc-regulator { |
| 51 |
compatible = "regulator-fixed"; |
| 52 |
regulator-name = "SDCC Power"; |
| 53 |
regulator-min-microvolt = <2700000>; |
| 54 |
regulator-max-microvolt = <2700000>; |
| 55 |
regulator-always-on; |
| 56 |
}; |
| 57 |
|
| 58 |
soc: soc { |
| 59 |
#address-cells = <1>; |
| 60 |
#size-cells = <1>; |
| 61 |
ranges; |
| 62 |
compatible = "simple-bus"; |
| 63 |
|
| 64 |
l2: cache-controller@2040000 { |
| 65 |
compatible = "arm,pl310-cache"; |
| 66 |
reg = <0x02040000 0x1000>; |
| 67 |
arm,data-latency = <2 2 0>; |
| 68 |
cache-unified; |
| 69 |
cache-level = <2>; |
| 70 |
}; |
| 71 |
|
| 72 |
intc: interrupt-controller@2000000 { |
| 73 |
compatible = "qcom,msm-qgic2"; |
| 74 |
interrupt-controller; |
| 75 |
#interrupt-cells = <3>; |
| 76 |
reg = <0x02000000 0x1000>, |
| 77 |
<0x02002000 0x1000>; |
| 78 |
}; |
| 79 |
|
| 80 |
timer@200a000 { |
| 81 |
compatible = "qcom,kpss-wdt-mdm9615", "qcom,kpss-timer", |
| 82 |
"qcom,msm-timer"; |
| 83 |
interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>, |
| 84 |
<GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>, |
| 85 |
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>; |
| 86 |
reg = <0x0200a000 0x100>; |
| 87 |
clock-frequency = <27000000>; |
| 88 |
cpu-offset = <0x80000>; |
| 89 |
}; |
| 90 |
|
| 91 |
msmgpio: pinctrl@800000 { |
| 92 |
compatible = "qcom,mdm9615-pinctrl"; |
| 93 |
gpio-controller; |
| 94 |
gpio-ranges = <&msmgpio 0 0 88>; |
| 95 |
#gpio-cells = <2>; |
| 96 |
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| 97 |
interrupt-controller; |
| 98 |
#interrupt-cells = <2>; |
| 99 |
reg = <0x800000 0x4000>; |
| 100 |
}; |
| 101 |
|
| 102 |
gcc: clock-controller@900000 { |
| 103 |
compatible = "qcom,gcc-mdm9615"; |
| 104 |
#clock-cells = <1>; |
| 105 |
#reset-cells = <1>; |
| 106 |
reg = <0x900000 0x4000>; |
| 107 |
clocks = <&cxo_board>, |
| 108 |
<&lcc PLL4>; |
| 109 |
}; |
| 110 |
|
| 111 |
lcc: clock-controller@28000000 { |
| 112 |
compatible = "qcom,lcc-mdm9615"; |
| 113 |
reg = <0x28000000 0x1000>; |
| 114 |
#clock-cells = <1>; |
| 115 |
#reset-cells = <1>; |
| 116 |
clocks = <&cxo_board>, |
| 117 |
<&gcc PLL4_VOTE>, |
| 118 |
<0>, |
| 119 |
<0>, <0>, |
| 120 |
<0>, <0>, |
| 121 |
<0>; |
| 122 |
clock-names = "cxo", |
| 123 |
"pll4_vote", |
| 124 |
"mi2s_codec_clk", |
| 125 |
"codec_i2s_mic_codec_clk", |
| 126 |
"spare_i2s_mic_codec_clk", |
| 127 |
"codec_i2s_spkr_codec_clk", |
| 128 |
"spare_i2s_spkr_codec_clk", |
| 129 |
"pcm_codec_clk"; |
| 130 |
}; |
| 131 |
|
| 132 |
l2cc: clock-controller@2011000 { |
| 133 |
compatible = "qcom,kpss-gcc-mdm9615", "qcom,kpss-gcc", "syscon"; |
| 134 |
reg = <0x02011000 0x1000>; |
| 135 |
}; |
| 136 |
|
| 137 |
rng@1a500000 { |
| 138 |
compatible = "qcom,prng"; |
| 139 |
reg = <0x1a500000 0x200>; |
| 140 |
clocks = <&gcc PRNG_CLK>; |
| 141 |
clock-names = "core"; |
| 142 |
assigned-clocks = <&gcc PRNG_CLK>; |
| 143 |
assigned-clock-rates = <32000000>; |
| 144 |
}; |
| 145 |
|
| 146 |
gsbi2: gsbi@16100000 { |
| 147 |
compatible = "qcom,gsbi-v1.0.0"; |
| 148 |
cell-index = <2>; |
| 149 |
reg = <0x16100000 0x100>; |
| 150 |
clocks = <&gcc GSBI2_H_CLK>; |
| 151 |
clock-names = "iface"; |
| 152 |
status = "disabled"; |
| 153 |
#address-cells = <1>; |
| 154 |
#size-cells = <1>; |
| 155 |
ranges; |
| 156 |
|
| 157 |
gsbi2_i2c: i2c@16180000 { |
| 158 |
compatible = "qcom,i2c-qup-v1.1.1"; |
| 159 |
#address-cells = <1>; |
| 160 |
#size-cells = <0>; |
| 161 |
reg = <0x16180000 0x1000>; |
| 162 |
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; |
| 163 |
|
| 164 |
clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; |
| 165 |
clock-names = "core", "iface"; |
| 166 |
status = "disabled"; |
| 167 |
}; |
| 168 |
}; |
| 169 |
|
| 170 |
gsbi3: gsbi@16200000 { |
| 171 |
compatible = "qcom,gsbi-v1.0.0"; |
| 172 |
cell-index = <3>; |
| 173 |
reg = <0x16200000 0x100>; |
| 174 |
clocks = <&gcc GSBI3_H_CLK>; |
| 175 |
clock-names = "iface"; |
| 176 |
status = "disabled"; |
| 177 |
#address-cells = <1>; |
| 178 |
#size-cells = <1>; |
| 179 |
ranges; |
| 180 |
|
| 181 |
gsbi3_spi: spi@16280000 { |
| 182 |
compatible = "qcom,spi-qup-v1.1.1"; |
| 183 |
#address-cells = <1>; |
| 184 |
#size-cells = <0>; |
| 185 |
reg = <0x16280000 0x1000>; |
| 186 |
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; |
| 187 |
|
| 188 |
clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>; |
| 189 |
clock-names = "core", "iface"; |
| 190 |
status = "disabled"; |
| 191 |
}; |
| 192 |
}; |
| 193 |
|
| 194 |
gsbi4: gsbi@16300000 { |
| 195 |
compatible = "qcom,gsbi-v1.0.0"; |
| 196 |
cell-index = <4>; |
| 197 |
reg = <0x16300000 0x100>; |
| 198 |
clocks = <&gcc GSBI4_H_CLK>; |
| 199 |
clock-names = "iface"; |
| 200 |
status = "disabled"; |
| 201 |
#address-cells = <1>; |
| 202 |
#size-cells = <1>; |
| 203 |
ranges; |
| 204 |
|
| 205 |
syscon-tcsr = <&tcsr>; |
| 206 |
|
| 207 |
gsbi4_serial: serial@16340000 { |
| 208 |
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; |
| 209 |
reg = <0x16340000 0x1000>, |
| 210 |
<0x16300000 0x1000>; |
| 211 |
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; |
| 212 |
clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; |
| 213 |
clock-names = "core", "iface"; |
| 214 |
status = "disabled"; |
| 215 |
}; |
| 216 |
}; |
| 217 |
|
| 218 |
gsbi5: gsbi@16400000 { |
| 219 |
compatible = "qcom,gsbi-v1.0.0"; |
| 220 |
cell-index = <5>; |
| 221 |
reg = <0x16400000 0x100>; |
| 222 |
clocks = <&gcc GSBI5_H_CLK>; |
| 223 |
clock-names = "iface"; |
| 224 |
status = "disabled"; |
| 225 |
#address-cells = <1>; |
| 226 |
#size-cells = <1>; |
| 227 |
ranges; |
| 228 |
|
| 229 |
syscon-tcsr = <&tcsr>; |
| 230 |
|
| 231 |
gsbi5_i2c: i2c@16480000 { |
| 232 |
compatible = "qcom,i2c-qup-v1.1.1"; |
| 233 |
#address-cells = <1>; |
| 234 |
#size-cells = <0>; |
| 235 |
reg = <0x16480000 0x1000>; |
| 236 |
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; |
| 237 |
|
| 238 |
/* QUP clock is not initialized, set rate */ |
| 239 |
assigned-clocks = <&gcc GSBI5_QUP_CLK>; |
| 240 |
assigned-clock-rates = <24000000>; |
| 241 |
|
| 242 |
clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; |
| 243 |
clock-names = "core", "iface"; |
| 244 |
status = "disabled"; |
| 245 |
}; |
| 246 |
|
| 247 |
gsbi5_serial: serial@16440000 { |
| 248 |
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; |
| 249 |
reg = <0x16440000 0x1000>, |
| 250 |
<0x16400000 0x1000>; |
| 251 |
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; |
| 252 |
clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; |
| 253 |
clock-names = "core", "iface"; |
| 254 |
status = "disabled"; |
| 255 |
}; |
| 256 |
}; |
| 257 |
|
| 258 |
ssbi: ssbi@500000 { |
| 259 |
compatible = "qcom,ssbi"; |
| 260 |
reg = <0x500000 0x1000>; |
| 261 |
qcom,controller-type = "pmic-arbiter"; |
| 262 |
}; |
| 263 |
|
| 264 |
sdcc1bam: dma-controller@12182000 { |
| 265 |
compatible = "qcom,bam-v1.3.0"; |
| 266 |
reg = <0x12182000 0x8000>; |
| 267 |
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; |
| 268 |
clocks = <&gcc SDC1_H_CLK>; |
| 269 |
clock-names = "bam_clk"; |
| 270 |
#dma-cells = <1>; |
| 271 |
qcom,ee = <0>; |
| 272 |
}; |
| 273 |
|
| 274 |
sdcc2bam: dma-controller@12142000 { |
| 275 |
compatible = "qcom,bam-v1.3.0"; |
| 276 |
reg = <0x12142000 0x8000>; |
| 277 |
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| 278 |
clocks = <&gcc SDC2_H_CLK>; |
| 279 |
clock-names = "bam_clk"; |
| 280 |
#dma-cells = <1>; |
| 281 |
qcom,ee = <0>; |
| 282 |
}; |
| 283 |
|
| 284 |
sdcc1: mmc@12180000 { |
| 285 |
status = "disabled"; |
| 286 |
compatible = "arm,pl18x", "arm,primecell"; |
| 287 |
arm,primecell-periphid = <0x00051180>; |
| 288 |
reg = <0x12180000 0x2000>; |
| 289 |
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; |
| 290 |
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; |
| 291 |
clock-names = "mclk", "apb_pclk"; |
| 292 |
bus-width = <8>; |
| 293 |
max-frequency = <48000000>; |
| 294 |
cap-sd-highspeed; |
| 295 |
cap-mmc-highspeed; |
| 296 |
vmmc-supply = <&vsdcc_fixed>; |
| 297 |
dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; |
| 298 |
dma-names = "tx", "rx"; |
| 299 |
assigned-clocks = <&gcc SDC1_CLK>; |
| 300 |
assigned-clock-rates = <400000>; |
| 301 |
}; |
| 302 |
|
| 303 |
sdcc2: mmc@12140000 { |
| 304 |
compatible = "arm,pl18x", "arm,primecell"; |
| 305 |
arm,primecell-periphid = <0x00051180>; |
| 306 |
status = "disabled"; |
| 307 |
reg = <0x12140000 0x2000>; |
| 308 |
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; |
| 309 |
clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>; |
| 310 |
clock-names = "mclk", "apb_pclk"; |
| 311 |
bus-width = <4>; |
| 312 |
cap-sd-highspeed; |
| 313 |
cap-mmc-highspeed; |
| 314 |
max-frequency = <48000000>; |
| 315 |
no-1-8-v; |
| 316 |
vmmc-supply = <&vsdcc_fixed>; |
| 317 |
dmas = <&sdcc2bam 2>, <&sdcc2bam 1>; |
| 318 |
dma-names = "tx", "rx"; |
| 319 |
assigned-clocks = <&gcc SDC2_CLK>; |
| 320 |
assigned-clock-rates = <400000>; |
| 321 |
}; |
| 322 |
|
| 323 |
tcsr: syscon@1a400000 { |
| 324 |
compatible = "qcom,tcsr-mdm9615", "syscon"; |
| 325 |
reg = <0x1a400000 0x100>; |
| 326 |
}; |
| 327 |
|
| 328 |
rpm: rpm@108000 { |
| 329 |
compatible = "qcom,rpm-mdm9615"; |
| 330 |
reg = <0x108000 0x1000>; |
| 331 |
|
| 332 |
qcom,ipc = <&l2cc 0x8 2>; |
| 333 |
|
| 334 |
interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>, |
| 335 |
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, |
| 336 |
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; |
| 337 |
interrupt-names = "ack", "err", "wakeup"; |
| 338 |
}; |
| 339 |
}; |
| 340 |
}; |