| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
#include <dt-bindings/gpio/gpio.h> |
| 3 |
#include <dt-bindings/input/input.h> |
| 4 |
#include <dt-bindings/mfd/qcom-rpm.h> |
| 5 |
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> |
| 6 |
|
| 7 |
#include "qcom-apq8064-v2.0.dtsi" |
| 8 |
#include "pm8821.dtsi" |
| 9 |
#include "pm8921.dtsi" |
| 10 |
|
| 11 |
/ { |
| 12 |
model = "Sony Xperia Z"; |
| 13 |
compatible = "sony,xperia-yuga", "qcom,apq8064"; |
| 14 |
chassis-type = "handset"; |
| 15 |
|
| 16 |
aliases { |
| 17 |
serial0 = &gsbi5_serial; |
| 18 |
}; |
| 19 |
|
| 20 |
chosen { |
| 21 |
stdout-path = "serial0:115200n8"; |
| 22 |
}; |
| 23 |
|
| 24 |
gpio-keys { |
| 25 |
compatible = "gpio-keys"; |
| 26 |
|
| 27 |
pinctrl-names = "default"; |
| 28 |
pinctrl-0 = <&gpio_keys_pin_a>; |
| 29 |
|
| 30 |
key-camera-focus { |
| 31 |
label = "camera_focus"; |
| 32 |
gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>; |
| 33 |
linux,input-type = <1>; |
| 34 |
linux,code = <KEY_CAMERA_FOCUS>; |
| 35 |
}; |
| 36 |
|
| 37 |
key-camera-snapshot { |
| 38 |
label = "camera_snapshot"; |
| 39 |
gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>; |
| 40 |
linux,input-type = <1>; |
| 41 |
linux,code = <KEY_CAMERA>; |
| 42 |
}; |
| 43 |
|
| 44 |
key-volume-down { |
| 45 |
label = "volume_down"; |
| 46 |
gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>; |
| 47 |
linux,input-type = <1>; |
| 48 |
linux,code = <KEY_VOLUMEDOWN>; |
| 49 |
}; |
| 50 |
|
| 51 |
key-volume-up { |
| 52 |
label = "volume_up"; |
| 53 |
gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>; |
| 54 |
linux,input-type = <1>; |
| 55 |
linux,code = <KEY_VOLUMEUP>; |
| 56 |
}; |
| 57 |
}; |
| 58 |
}; |
| 59 |
|
| 60 |
&gsbi5 { |
| 61 |
qcom,mode = <GSBI_PROT_I2C_UART>; |
| 62 |
status = "okay"; |
| 63 |
}; |
| 64 |
|
| 65 |
&gsbi5_serial { |
| 66 |
pinctrl-names = "default"; |
| 67 |
pinctrl-0 = <&gsbi5_uart_pin_a>; |
| 68 |
status = "okay"; |
| 69 |
}; |
| 70 |
|
| 71 |
&pm8821 { |
| 72 |
interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>; |
| 73 |
}; |
| 74 |
|
| 75 |
&pm8921 { |
| 76 |
interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>; |
| 77 |
}; |
| 78 |
|
| 79 |
&pm8921_gpio { |
| 80 |
gpio_keys_pin_a: gpio-keys-active-state { |
| 81 |
pins = "gpio3", "gpio4", "gpio29", "gpio35"; |
| 82 |
function = "normal"; |
| 83 |
|
| 84 |
bias-pull-up; |
| 85 |
drive-push-pull; |
| 86 |
input-enable; |
| 87 |
power-source = <2>; |
| 88 |
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; |
| 89 |
qcom,pull-up-strength = <0>; |
| 90 |
}; |
| 91 |
}; |
| 92 |
|
| 93 |
&riva { |
| 94 |
pinctrl-names = "default"; |
| 95 |
pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>; |
| 96 |
|
| 97 |
vddcx-supply = <&pm8921_s3>; |
| 98 |
vddmx-supply = <&pm8921_l24>; |
| 99 |
vddpx-supply = <&pm8921_s4>; |
| 100 |
|
| 101 |
status = "okay"; |
| 102 |
|
| 103 |
iris { |
| 104 |
vddxo-supply = <&pm8921_l4>; |
| 105 |
vddrfa-supply = <&pm8921_s2>; |
| 106 |
vddpa-supply = <&pm8921_l10>; |
| 107 |
vdddig-supply = <&pm8921_lvs2>; |
| 108 |
}; |
| 109 |
}; |
| 110 |
|
| 111 |
&rpm { |
| 112 |
regulators { |
| 113 |
compatible = "qcom,rpm-pm8921-regulators"; |
| 114 |
|
| 115 |
vin_l1_l2_l12_l18-supply = <&pm8921_s4>; |
| 116 |
vin_lvs_1_3_6-supply = <&pm8921_s4>; |
| 117 |
vin_lvs_4_5_7-supply = <&pm8921_s4>; |
| 118 |
vin_ncp-supply = <&pm8921_l6>; |
| 119 |
vin_lvs2-supply = <&pm8921_s4>; |
| 120 |
vin_l24-supply = <&pm8921_s1>; |
| 121 |
vin_l25-supply = <&pm8921_s1>; |
| 122 |
vin_l27-supply = <&pm8921_s7>; |
| 123 |
vin_l28-supply = <&pm8921_s7>; |
| 124 |
|
| 125 |
/* Buck SMPS */ |
| 126 |
pm8921_s1: s1 { |
| 127 |
regulator-always-on; |
| 128 |
regulator-min-microvolt = <1225000>; |
| 129 |
regulator-max-microvolt = <1225000>; |
| 130 |
qcom,switch-mode-frequency = <3200000>; |
| 131 |
bias-pull-down; |
| 132 |
}; |
| 133 |
|
| 134 |
pm8921_s2: s2 { |
| 135 |
regulator-min-microvolt = <1300000>; |
| 136 |
regulator-max-microvolt = <1300000>; |
| 137 |
qcom,switch-mode-frequency = <1600000>; |
| 138 |
bias-pull-down; |
| 139 |
}; |
| 140 |
|
| 141 |
pm8921_s3: s3 { |
| 142 |
regulator-min-microvolt = <500000>; |
| 143 |
regulator-max-microvolt = <1150000>; |
| 144 |
qcom,switch-mode-frequency = <4800000>; |
| 145 |
bias-pull-down; |
| 146 |
}; |
| 147 |
|
| 148 |
pm8921_s4: s4 { |
| 149 |
regulator-always-on; |
| 150 |
regulator-min-microvolt = <1800000>; |
| 151 |
regulator-max-microvolt = <1800000>; |
| 152 |
qcom,switch-mode-frequency = <1600000>; |
| 153 |
bias-pull-down; |
| 154 |
qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; |
| 155 |
}; |
| 156 |
|
| 157 |
pm8921_s7: s7 { |
| 158 |
regulator-min-microvolt = <1300000>; |
| 159 |
regulator-max-microvolt = <1300000>; |
| 160 |
qcom,switch-mode-frequency = <3200000>; |
| 161 |
}; |
| 162 |
|
| 163 |
pm8921_s8: s8 { |
| 164 |
regulator-min-microvolt = <2200000>; |
| 165 |
regulator-max-microvolt = <2200000>; |
| 166 |
qcom,switch-mode-frequency = <1600000>; |
| 167 |
}; |
| 168 |
|
| 169 |
/* PMOS LDO */ |
| 170 |
pm8921_l1: l1 { |
| 171 |
regulator-always-on; |
| 172 |
regulator-min-microvolt = <1100000>; |
| 173 |
regulator-max-microvolt = <1100000>; |
| 174 |
bias-pull-down; |
| 175 |
}; |
| 176 |
|
| 177 |
pm8921_l2: l2 { |
| 178 |
regulator-min-microvolt = <1200000>; |
| 179 |
regulator-max-microvolt = <1200000>; |
| 180 |
bias-pull-down; |
| 181 |
}; |
| 182 |
|
| 183 |
pm8921_l3: l3 { |
| 184 |
regulator-min-microvolt = <3075000>; |
| 185 |
regulator-max-microvolt = <3075000>; |
| 186 |
bias-pull-down; |
| 187 |
}; |
| 188 |
|
| 189 |
pm8921_l4: l4 { |
| 190 |
regulator-always-on; |
| 191 |
regulator-min-microvolt = <1800000>; |
| 192 |
regulator-max-microvolt = <1800000>; |
| 193 |
bias-pull-down; |
| 194 |
}; |
| 195 |
|
| 196 |
pm8921_l5: l5 { |
| 197 |
regulator-min-microvolt = <2950000>; |
| 198 |
regulator-max-microvolt = <2950000>; |
| 199 |
bias-pull-down; |
| 200 |
}; |
| 201 |
|
| 202 |
pm8921_l6: l6 { |
| 203 |
regulator-min-microvolt = <2950000>; |
| 204 |
regulator-max-microvolt = <2950000>; |
| 205 |
bias-pull-down; |
| 206 |
}; |
| 207 |
|
| 208 |
pm8921_l7: l7 { |
| 209 |
regulator-min-microvolt = <1850000>; |
| 210 |
regulator-max-microvolt = <2950000>; |
| 211 |
bias-pull-down; |
| 212 |
}; |
| 213 |
|
| 214 |
pm8921_l8: l8 { |
| 215 |
regulator-min-microvolt = <2800000>; |
| 216 |
regulator-max-microvolt = <2800000>; |
| 217 |
bias-pull-down; |
| 218 |
}; |
| 219 |
|
| 220 |
pm8921_l9: l9 { |
| 221 |
regulator-min-microvolt = <3000000>; |
| 222 |
regulator-max-microvolt = <3000000>; |
| 223 |
bias-pull-down; |
| 224 |
}; |
| 225 |
|
| 226 |
pm8921_l10: l10 { |
| 227 |
regulator-min-microvolt = <2900000>; |
| 228 |
regulator-max-microvolt = <2900000>; |
| 229 |
bias-pull-down; |
| 230 |
}; |
| 231 |
|
| 232 |
pm8921_l11: l11 { |
| 233 |
regulator-min-microvolt = <3000000>; |
| 234 |
regulator-max-microvolt = <3000000>; |
| 235 |
bias-pull-down; |
| 236 |
}; |
| 237 |
|
| 238 |
pm8921_l12: l12 { |
| 239 |
regulator-min-microvolt = <1200000>; |
| 240 |
regulator-max-microvolt = <1200000>; |
| 241 |
bias-pull-down; |
| 242 |
}; |
| 243 |
|
| 244 |
pm8921_l14: l14 { |
| 245 |
regulator-min-microvolt = <1800000>; |
| 246 |
regulator-max-microvolt = <1800000>; |
| 247 |
bias-pull-down; |
| 248 |
}; |
| 249 |
|
| 250 |
pm8921_l15: l15 { |
| 251 |
regulator-min-microvolt = <1800000>; |
| 252 |
regulator-max-microvolt = <2950000>; |
| 253 |
bias-pull-down; |
| 254 |
}; |
| 255 |
|
| 256 |
pm8921_l16: l16 { |
| 257 |
regulator-min-microvolt = <2800000>; |
| 258 |
regulator-max-microvolt = <2800000>; |
| 259 |
bias-pull-down; |
| 260 |
}; |
| 261 |
|
| 262 |
pm8921_l17: l17 { |
| 263 |
regulator-min-microvolt = <2000000>; |
| 264 |
regulator-max-microvolt = <2000000>; |
| 265 |
bias-pull-down; |
| 266 |
}; |
| 267 |
|
| 268 |
pm8921_l18: l18 { |
| 269 |
regulator-min-microvolt = <1200000>; |
| 270 |
regulator-max-microvolt = <1200000>; |
| 271 |
bias-pull-down; |
| 272 |
}; |
| 273 |
|
| 274 |
pm8921_l21: l21 { |
| 275 |
regulator-min-microvolt = <1050000>; |
| 276 |
regulator-max-microvolt = <1050000>; |
| 277 |
bias-pull-down; |
| 278 |
}; |
| 279 |
|
| 280 |
pm8921_l22: l22 { |
| 281 |
regulator-min-microvolt = <2600000>; |
| 282 |
regulator-max-microvolt = <2600000>; |
| 283 |
bias-pull-down; |
| 284 |
}; |
| 285 |
|
| 286 |
pm8921_l23: l23 { |
| 287 |
regulator-min-microvolt = <1800000>; |
| 288 |
regulator-max-microvolt = <1800000>; |
| 289 |
bias-pull-down; |
| 290 |
}; |
| 291 |
|
| 292 |
pm8921_l24: l24 { |
| 293 |
regulator-min-microvolt = <750000>; |
| 294 |
regulator-max-microvolt = <1150000>; |
| 295 |
bias-pull-down; |
| 296 |
}; |
| 297 |
|
| 298 |
pm8921_l25: l25 { |
| 299 |
regulator-always-on; |
| 300 |
regulator-min-microvolt = <1250000>; |
| 301 |
regulator-max-microvolt = <1250000>; |
| 302 |
bias-pull-down; |
| 303 |
}; |
| 304 |
|
| 305 |
pm8921_l27: l27 { |
| 306 |
regulator-min-microvolt = <1100000>; |
| 307 |
regulator-max-microvolt = <1100000>; |
| 308 |
}; |
| 309 |
|
| 310 |
pm8921_l28: l28 { |
| 311 |
regulator-min-microvolt = <1050000>; |
| 312 |
regulator-max-microvolt = <1050000>; |
| 313 |
bias-pull-down; |
| 314 |
}; |
| 315 |
|
| 316 |
pm8921_l29: l29 { |
| 317 |
regulator-min-microvolt = <2000000>; |
| 318 |
regulator-max-microvolt = <2000000>; |
| 319 |
bias-pull-down; |
| 320 |
}; |
| 321 |
|
| 322 |
/* Low Voltage Switch */ |
| 323 |
pm8921_lvs1: lvs1 { |
| 324 |
bias-pull-down; |
| 325 |
}; |
| 326 |
|
| 327 |
pm8921_lvs2: lvs2 { |
| 328 |
bias-pull-down; |
| 329 |
}; |
| 330 |
|
| 331 |
pm8921_lvs3: lvs3 { |
| 332 |
bias-pull-down; |
| 333 |
}; |
| 334 |
|
| 335 |
pm8921_lvs4: lvs4 { |
| 336 |
bias-pull-down; |
| 337 |
}; |
| 338 |
|
| 339 |
pm8921_lvs5: lvs5 { |
| 340 |
bias-pull-down; |
| 341 |
}; |
| 342 |
|
| 343 |
pm8921_lvs6: lvs6 { |
| 344 |
bias-pull-down; |
| 345 |
}; |
| 346 |
|
| 347 |
pm8921_lvs7: lvs7 { |
| 348 |
bias-pull-down; |
| 349 |
}; |
| 350 |
|
| 351 |
pm8921_usb_switch: usb-switch {}; |
| 352 |
|
| 353 |
pm8921_hdmi_switch: hdmi-switch { |
| 354 |
bias-pull-down; |
| 355 |
}; |
| 356 |
|
| 357 |
pm8921_ncp: ncp { |
| 358 |
regulator-min-microvolt = <1800000>; |
| 359 |
regulator-max-microvolt = <1800000>; |
| 360 |
qcom,switch-mode-frequency = <1600000>; |
| 361 |
}; |
| 362 |
}; |
| 363 |
}; |
| 364 |
|
| 365 |
&sdcc1 { |
| 366 |
vmmc-supply = <&pm8921_l5>; |
| 367 |
vqmmc-supply = <&pm8921_s4>; |
| 368 |
status = "okay"; |
| 369 |
}; |
| 370 |
|
| 371 |
&sdcc3 { |
| 372 |
vmmc-supply = <&pm8921_l6>; |
| 373 |
cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; |
| 374 |
|
| 375 |
pinctrl-names = "default"; |
| 376 |
pinctrl-0 = <&sdcc3_default_state>, <&sdcc3_cd_pin_a>; |
| 377 |
|
| 378 |
status = "okay"; |
| 379 |
}; |
| 380 |
|
| 381 |
&tlmm_pinmux { |
| 382 |
gsbi5_uart_pin_a: gsbi5-uart-pin-active-state { |
| 383 |
rx-pins { |
| 384 |
pins = "gpio52"; |
| 385 |
function = "gsbi5"; |
| 386 |
drive-strength = <2>; |
| 387 |
bias-pull-up; |
| 388 |
}; |
| 389 |
|
| 390 |
tx-pins { |
| 391 |
pins = "gpio51"; |
| 392 |
function = "gsbi5"; |
| 393 |
drive-strength = <4>; |
| 394 |
bias-disable; |
| 395 |
}; |
| 396 |
}; |
| 397 |
|
| 398 |
|
| 399 |
sdcc3_cd_pin_a: sdcc3-cd-pin-active-state { |
| 400 |
pins = "gpio26"; |
| 401 |
function = "gpio"; |
| 402 |
|
| 403 |
drive-strength = <2>; |
| 404 |
bias-disable; |
| 405 |
}; |
| 406 |
}; |
| 407 |
|
| 408 |
&usb_hs1_phy { |
| 409 |
v3p3-supply = <&pm8921_l3>; |
| 410 |
v1p8-supply = <&pm8921_l4>; |
| 411 |
}; |
| 412 |
|
| 413 |
&usb1 { |
| 414 |
dr_mode = "otg"; |
| 415 |
status = "okay"; |
| 416 |
}; |