Debian Codegraph @

arch/arm/boot/dts/broadcom/bcm958625k.dts

raw
1 /*
2 * BSD LICENSE
3 *
4 * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 *
10 * * Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * * Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in
14 * the documentation and/or other materials provided with the
15 * distribution.
16 * * Neither the name of Broadcom Corporation nor the names of its
17 * contributors may be used to endorse or promote products derived
18 * from this software without specific prior written permission.
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 */
32
33 /dts-v1/;
34
35 #include "bcm-nsp.dtsi"
36
37 / {
38 model = "NorthStar Plus SVK (BCM958625K)";
39 compatible = "brcm,bcm958625k", "brcm,bcm58625", "brcm,nsp";
40
41 chosen {
42 stdout-path = "serial0:115200n8";
43 };
44
45 memory@60000000 {
46 device_type = "memory";
47 reg = <0x60000000 0x80000000>;
48 };
49 };
50
51 &dma {
52 status = "okay";
53 };
54
55 &amac0 {
56 status = "okay";
57 };
58
59 &amac1 {
60 status = "okay";
61 };
62
63 &amac2 {
64 status = "okay";
65 };
66
67 &ehci0 {
68 status = "okay";
69 };
70
71 &nand_controller {
72 nand@0 {
73 compatible = "brcm,nandcs";
74 reg = <0>;
75 nand-on-flash-bbt;
76
77 #address-cells = <1>;
78 #size-cells = <1>;
79
80 nand-ecc-strength = <24>;
81 nand-ecc-step-size = <1024>;
82
83 brcm,nand-oob-sector-size = <27>;
84
85 partition@0 {
86 label = "nboot";
87 reg = <0x00000000 0x00200000>;
88 read-only;
89 };
90 partition@200000 {
91 label = "nenv";
92 reg = <0x00200000 0x00400000>;
93 };
94 partition@600000 {
95 label = "nsystem";
96 reg = <0x00600000 0x00a00000>;
97 };
98 partition@1000000 {
99 label = "nrootfs";
100 reg = <0x01000000 0x03000000>;
101 };
102 partition@4000000 {
103 label = "ncustfs";
104 reg = <0x04000000 0x3c000000>;
105 };
106 };
107 };
108
109 &ohci0 {
110 status = "okay";
111 };
112
113 &pcie0 {
114 status = "okay";
115 };
116
117 &pcie1 {
118 status = "okay";
119 };
120
121 &pcie2 {
122 status = "okay";
123 };
124
125 &pinctrl {
126 pinctrl-names = "default";
127 pinctrl-0 = <&nand_sel>, <&gpiobs>, <&pwmc>;
128
129 nand_sel: nand_sel {
130 function = "nand";
131 groups = "nand_grp";
132 };
133
134 gpiobs: gpiobs {
135 function = "gpio_b";
136 groups = "gpio_b_0_grp", "gpio_b_1_grp", "gpio_b_2_grp",
137 "gpio_b_3_grp";
138 };
139
140 pwmc: pwmc {
141 function = "pwm";
142 groups = "pwm0_grp", "pwm1_grp", "pwm2_grp", "pwm3_grp";
143 };
144
145 emmc_sel: emmc_sel {
146 function = "emmc";
147 groups = "emmc_grp";
148 };
149 };
150
151 &pwm {
152 status = "okay";
153 };
154
155 &qspi {
156 status = "okay";
157 flash: flash@0 {
158 #address-cells = <1>;
159 #size-cells = <1>;
160 compatible = "m25p80";
161 reg = <0x0>;
162 spi-max-frequency = <12500000>;
163 m25p,fast-read;
164 spi-cpol;
165 spi-cpha;
166
167 partition@0 {
168 label = "boot";
169 reg = <0x00000000 0x000a0000>;
170 };
171
172 partition@a0000 {
173 label = "env";
174 reg = <0x000a0000 0x00060000>;
175 };
176
177 partition@100000 {
178 label = "system";
179 reg = <0x00100000 0x00600000>;
180 };
181
182 partition@700000 {
183 label = "rootfs";
184 reg = <0x00700000 0x01900000>;
185 };
186 };
187 };
188
189 &sata_phy0 {
190 status = "okay";
191 };
192
193 &sata_phy1 {
194 status = "okay";
195 };
196
197 &sata {
198 status = "okay";
199 };
200
201 /*
202 * By default the sd slot is functional. For emmc to work add "<&emmc_sel>"
203 * and delete "<&nand_sel>" in "pinctrl-0" property of pinctrl node. Remove the
204 * bus-width property here and disable the nand node with status = "disabled";.
205 *
206 * Ex: pinctrl-0 = <&emmc_sel>, <&gpiobs>, <&pwmc>;
207 */
208 &sdio {
209 bus-width = <4>;
210 no-1-8-v;
211 status = "okay";
212 };
213
214 &srab {
215 compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
216 status = "okay";
217
218 ports {
219 port@0 {
220 label = "port0";
221 reg = <0>;
222 };
223
224 port@1 {
225 label = "port1";
226 reg = <1>;
227 };
228
229 port@2 {
230 label = "port2";
231 reg = <2>;
232 };
233
234 port@3 {
235 label = "port3";
236 reg = <3>;
237 };
238
239 port@4 {
240 label = "port4";
241 reg = <4>;
242 };
243
244 port@8 {
245 ethernet = <&amac2>;
246 label = "cpu";
247 reg = <8>;
248 fixed-link {
249 speed = <1000>;
250 full-duplex;
251 };
252 };
253 };
254 };
255
256 &uart0 {
257 status = "okay";
258 };
259
260 &uart1 {
261 status = "okay";
262 };
263
264 &usb3_phy {
265 status = "okay";
266 };
267
268 &xhci {
269 status = "okay";
270 };