| 1 |
/* |
| 2 |
* BSD LICENSE |
| 3 |
* |
| 4 |
* Copyright(c) 2015 Broadcom Corporation. All rights reserved. |
| 5 |
* |
| 6 |
* Redistribution and use in source and binary forms, with or without |
| 7 |
* modification, are permitted provided that the following conditions |
| 8 |
* are met: |
| 9 |
* |
| 10 |
* * Redistributions of source code must retain the above copyright |
| 11 |
* notice, this list of conditions and the following disclaimer. |
| 12 |
* * Redistributions in binary form must reproduce the above copyright |
| 13 |
* notice, this list of conditions and the following disclaimer in |
| 14 |
* the documentation and/or other materials provided with the |
| 15 |
* distribution. |
| 16 |
* * Neither the name of Broadcom Corporation nor the names of its |
| 17 |
* contributors may be used to endorse or promote products derived |
| 18 |
* from this software without specific prior written permission. |
| 19 |
* |
| 20 |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| 21 |
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| 22 |
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| 23 |
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| 24 |
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| 25 |
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| 26 |
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| 27 |
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| 28 |
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| 29 |
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| 30 |
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| 31 |
*/ |
| 32 |
|
| 33 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 34 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 35 |
#include <dt-bindings/clock/bcm-nsp.h> |
| 36 |
|
| 37 |
/ { |
| 38 |
#address-cells = <1>; |
| 39 |
#size-cells = <1>; |
| 40 |
compatible = "brcm,nsp"; |
| 41 |
model = "Broadcom Northstar Plus SoC"; |
| 42 |
interrupt-parent = <&gic>; |
| 43 |
|
| 44 |
aliases { |
| 45 |
serial0 = &uart0; |
| 46 |
serial1 = &uart1; |
| 47 |
ethernet0 = &amac0; |
| 48 |
ethernet1 = &amac1; |
| 49 |
ethernet2 = &amac2; |
| 50 |
}; |
| 51 |
|
| 52 |
cpus { |
| 53 |
#address-cells = <1>; |
| 54 |
#size-cells = <0>; |
| 55 |
|
| 56 |
cpu0: cpu@0 { |
| 57 |
device_type = "cpu"; |
| 58 |
compatible = "arm,cortex-a9"; |
| 59 |
next-level-cache = <&L2>; |
| 60 |
reg = <0x0>; |
| 61 |
}; |
| 62 |
|
| 63 |
cpu1: cpu@1 { |
| 64 |
device_type = "cpu"; |
| 65 |
compatible = "arm,cortex-a9"; |
| 66 |
next-level-cache = <&L2>; |
| 67 |
enable-method = "brcm,bcm-nsp-smp"; |
| 68 |
secondary-boot-reg = <0xffff0fec>; |
| 69 |
reg = <0x1>; |
| 70 |
}; |
| 71 |
}; |
| 72 |
|
| 73 |
pmu { |
| 74 |
compatible = "arm,cortex-a9-pmu"; |
| 75 |
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| 76 |
<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| 77 |
interrupt-affinity = <&cpu0>, <&cpu1>; |
| 78 |
}; |
| 79 |
|
| 80 |
mpcore-bus@19000000 { |
| 81 |
compatible = "simple-bus"; |
| 82 |
ranges = <0x00000000 0x19000000 0x00023000>; |
| 83 |
#address-cells = <1>; |
| 84 |
#size-cells = <1>; |
| 85 |
|
| 86 |
a9pll: arm_clk@0 { |
| 87 |
#clock-cells = <0>; |
| 88 |
compatible = "brcm,nsp-armpll"; |
| 89 |
clocks = <&osc>; |
| 90 |
reg = <0x00000 0x1000>; |
| 91 |
}; |
| 92 |
|
| 93 |
timer@20200 { |
| 94 |
compatible = "arm,cortex-a9-global-timer"; |
| 95 |
reg = <0x20200 0x100>; |
| 96 |
interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; |
| 97 |
clocks = <&periph_clk>; |
| 98 |
}; |
| 99 |
|
| 100 |
twd-timer@20600 { |
| 101 |
compatible = "arm,cortex-a9-twd-timer"; |
| 102 |
reg = <0x20600 0x20>; |
| 103 |
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | |
| 104 |
IRQ_TYPE_EDGE_RISING)>; |
| 105 |
clocks = <&periph_clk>; |
| 106 |
}; |
| 107 |
|
| 108 |
twd-watchdog@20620 { |
| 109 |
compatible = "arm,cortex-a9-twd-wdt"; |
| 110 |
reg = <0x20620 0x20>; |
| 111 |
interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | |
| 112 |
IRQ_TYPE_LEVEL_HIGH)>; |
| 113 |
clocks = <&periph_clk>; |
| 114 |
}; |
| 115 |
|
| 116 |
gic: interrupt-controller@21000 { |
| 117 |
compatible = "arm,cortex-a9-gic"; |
| 118 |
#interrupt-cells = <3>; |
| 119 |
#address-cells = <0>; |
| 120 |
interrupt-controller; |
| 121 |
reg = <0x21000 0x1000>, |
| 122 |
<0x20100 0x100>; |
| 123 |
}; |
| 124 |
|
| 125 |
L2: cache-controller@22000 { |
| 126 |
compatible = "arm,pl310-cache"; |
| 127 |
reg = <0x22000 0x1000>; |
| 128 |
cache-unified; |
| 129 |
cache-level = <2>; |
| 130 |
}; |
| 131 |
}; |
| 132 |
|
| 133 |
clocks { |
| 134 |
#address-cells = <1>; |
| 135 |
#size-cells = <1>; |
| 136 |
ranges; |
| 137 |
|
| 138 |
osc: oscillator { |
| 139 |
#clock-cells = <0>; |
| 140 |
compatible = "fixed-clock"; |
| 141 |
clock-frequency = <25000000>; |
| 142 |
}; |
| 143 |
|
| 144 |
iprocmed: iprocmed { |
| 145 |
#clock-cells = <0>; |
| 146 |
compatible = "fixed-factor-clock"; |
| 147 |
clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>; |
| 148 |
clock-div = <2>; |
| 149 |
clock-mult = <1>; |
| 150 |
}; |
| 151 |
|
| 152 |
iprocslow: iprocslow { |
| 153 |
#clock-cells = <0>; |
| 154 |
compatible = "fixed-factor-clock"; |
| 155 |
clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>; |
| 156 |
clock-div = <4>; |
| 157 |
clock-mult = <1>; |
| 158 |
}; |
| 159 |
|
| 160 |
periph_clk: periph_clk { |
| 161 |
#clock-cells = <0>; |
| 162 |
compatible = "fixed-factor-clock"; |
| 163 |
clocks = <&a9pll>; |
| 164 |
clock-div = <2>; |
| 165 |
clock-mult = <1>; |
| 166 |
}; |
| 167 |
}; |
| 168 |
|
| 169 |
axi: axi@18000000 { |
| 170 |
compatible = "simple-bus"; |
| 171 |
ranges = <0x00000000 0x18000000 0x0011c40c>; |
| 172 |
#address-cells = <1>; |
| 173 |
#size-cells = <1>; |
| 174 |
|
| 175 |
gpioa: gpio@20 { |
| 176 |
compatible = "brcm,nsp-gpio-a"; |
| 177 |
reg = <0x0020 0x70>, |
| 178 |
<0x3f1c4 0x1c>; |
| 179 |
#gpio-cells = <2>; |
| 180 |
gpio-controller; |
| 181 |
ngpios = <32>; |
| 182 |
interrupt-controller; |
| 183 |
#interrupt-cells = <2>; |
| 184 |
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; |
| 185 |
gpio-ranges = <&pinctrl 0 0 32>; |
| 186 |
}; |
| 187 |
|
| 188 |
uart0: serial@300 { |
| 189 |
compatible = "ns16550a"; |
| 190 |
reg = <0x0300 0x100>; |
| 191 |
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; |
| 192 |
clocks = <&osc>; |
| 193 |
status = "disabled"; |
| 194 |
}; |
| 195 |
|
| 196 |
uart1: serial@400 { |
| 197 |
compatible = "ns16550a"; |
| 198 |
reg = <0x0400 0x100>; |
| 199 |
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; |
| 200 |
clocks = <&osc>; |
| 201 |
status = "disabled"; |
| 202 |
}; |
| 203 |
|
| 204 |
dma: dma@20000 { |
| 205 |
compatible = "arm,pl330", "arm,primecell"; |
| 206 |
reg = <0x20000 0x1000>; |
| 207 |
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, |
| 208 |
<GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, |
| 209 |
<GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, |
| 210 |
<GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, |
| 211 |
<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, |
| 212 |
<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, |
| 213 |
<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, |
| 214 |
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, |
| 215 |
<GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; |
| 216 |
clocks = <&iprocslow>; |
| 217 |
clock-names = "apb_pclk"; |
| 218 |
#dma-cells = <1>; |
| 219 |
dma-coherent; |
| 220 |
status = "disabled"; |
| 221 |
}; |
| 222 |
|
| 223 |
sdio: mmc@21000 { |
| 224 |
compatible = "brcm,sdhci-iproc-cygnus"; |
| 225 |
reg = <0x21000 0x100>; |
| 226 |
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; |
| 227 |
sdhci,auto-cmd12; |
| 228 |
clocks = <&lcpll0 BCM_NSP_LCPLL0_SDIO_CLK>; |
| 229 |
dma-coherent; |
| 230 |
status = "disabled"; |
| 231 |
}; |
| 232 |
|
| 233 |
amac0: ethernet@22000 { |
| 234 |
compatible = "brcm,nsp-amac"; |
| 235 |
reg = <0x022000 0x1000>, |
| 236 |
<0x110000 0x1000>; |
| 237 |
reg-names = "amac_base", "idm_base"; |
| 238 |
interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; |
| 239 |
dma-coherent; |
| 240 |
status = "disabled"; |
| 241 |
}; |
| 242 |
|
| 243 |
amac1: ethernet@23000 { |
| 244 |
compatible = "brcm,nsp-amac"; |
| 245 |
reg = <0x023000 0x1000>, |
| 246 |
<0x111000 0x1000>; |
| 247 |
reg-names = "amac_base", "idm_base"; |
| 248 |
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; |
| 249 |
dma-coherent; |
| 250 |
status = "disabled"; |
| 251 |
}; |
| 252 |
|
| 253 |
amac2: ethernet@24000 { |
| 254 |
compatible = "brcm,nsp-amac"; |
| 255 |
reg = <0x024000 0x1000>, |
| 256 |
<0x112000 0x1000>; |
| 257 |
reg-names = "amac_base", "idm_base"; |
| 258 |
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; |
| 259 |
dma-coherent; |
| 260 |
status = "disabled"; |
| 261 |
}; |
| 262 |
|
| 263 |
mailbox: mailbox@25c00 { |
| 264 |
compatible = "brcm,iproc-fa2-mbox"; |
| 265 |
reg = <0x25c00 0x400>; |
| 266 |
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; |
| 267 |
#mbox-cells = <1>; |
| 268 |
brcm,rx-status-len = <32>; |
| 269 |
brcm,use-bcm-hdr; |
| 270 |
dma-coherent; |
| 271 |
}; |
| 272 |
|
| 273 |
nand_controller: nand-controller@26000 { |
| 274 |
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; |
| 275 |
reg = <0x026000 0x600>, |
| 276 |
<0x11b408 0x600>, |
| 277 |
<0x026f00 0x20>; |
| 278 |
reg-names = "nand", "iproc-idm", "iproc-ext"; |
| 279 |
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; |
| 280 |
|
| 281 |
#address-cells = <1>; |
| 282 |
#size-cells = <0>; |
| 283 |
|
| 284 |
brcm,nand-has-wp; |
| 285 |
}; |
| 286 |
|
| 287 |
qspi: spi@27200 { |
| 288 |
compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi"; |
| 289 |
reg = <0x027200 0x184>, |
| 290 |
<0x027000 0x124>, |
| 291 |
<0x11c408 0x004>, |
| 292 |
<0x0273a0 0x01c>; |
| 293 |
reg-names = "mspi", "bspi", "intr_regs", |
| 294 |
"intr_status_reg"; |
| 295 |
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, |
| 296 |
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, |
| 297 |
<GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, |
| 298 |
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, |
| 299 |
<GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, |
| 300 |
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, |
| 301 |
<GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; |
| 302 |
interrupt-names = "spi_lr_fullness_reached", |
| 303 |
"spi_lr_session_aborted", |
| 304 |
"spi_lr_impatient", |
| 305 |
"spi_lr_session_done", |
| 306 |
"spi_lr_overhead", |
| 307 |
"mspi_done", |
| 308 |
"mspi_halted"; |
| 309 |
clocks = <&iprocmed>; |
| 310 |
clock-names = "iprocmed"; |
| 311 |
num-cs = <2>; |
| 312 |
#address-cells = <1>; |
| 313 |
#size-cells = <0>; |
| 314 |
status = "disabled"; |
| 315 |
}; |
| 316 |
|
| 317 |
xhci: usb@29000 { |
| 318 |
compatible = "generic-xhci"; |
| 319 |
reg = <0x29000 0x1000>; |
| 320 |
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; |
| 321 |
phys = <&usb3_phy>; |
| 322 |
phy-names = "usb3-phy"; |
| 323 |
dma-coherent; |
| 324 |
status = "disabled"; |
| 325 |
}; |
| 326 |
|
| 327 |
ehci0: usb@2a000 { |
| 328 |
compatible = "generic-ehci"; |
| 329 |
reg = <0x2a000 0x100>; |
| 330 |
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; |
| 331 |
dma-coherent; |
| 332 |
status = "disabled"; |
| 333 |
}; |
| 334 |
|
| 335 |
ohci0: usb@2b000 { |
| 336 |
compatible = "generic-ohci"; |
| 337 |
reg = <0x2b000 0x100>; |
| 338 |
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; |
| 339 |
dma-coherent; |
| 340 |
status = "disabled"; |
| 341 |
}; |
| 342 |
|
| 343 |
crypto@2f000 { |
| 344 |
compatible = "brcm,spum-nsp-crypto"; |
| 345 |
reg = <0x2f000 0x900>; |
| 346 |
mboxes = <&mailbox 0>; |
| 347 |
}; |
| 348 |
|
| 349 |
gpiob: gpio@30000 { |
| 350 |
compatible = "brcm,iproc-nsp-gpio", "brcm,iproc-gpio"; |
| 351 |
reg = <0x30000 0x50>; |
| 352 |
#gpio-cells = <2>; |
| 353 |
gpio-controller; |
| 354 |
ngpios = <4>; |
| 355 |
interrupt-controller; |
| 356 |
#interrupt-cells = <2>; |
| 357 |
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| 358 |
}; |
| 359 |
|
| 360 |
pwm: pwm@31000 { |
| 361 |
compatible = "brcm,iproc-pwm"; |
| 362 |
reg = <0x31000 0x28>; |
| 363 |
clocks = <&osc>; |
| 364 |
#pwm-cells = <3>; |
| 365 |
status = "disabled"; |
| 366 |
}; |
| 367 |
|
| 368 |
mdio: mdio@32000 { |
| 369 |
compatible = "brcm,iproc-mdio"; |
| 370 |
reg = <0x32000 0x8>; |
| 371 |
#size-cells = <0>; |
| 372 |
#address-cells = <1>; |
| 373 |
}; |
| 374 |
|
| 375 |
mdio-mux@32000 { |
| 376 |
compatible = "mdio-mux-mmioreg", "mdio-mux"; |
| 377 |
reg = <0x32000 0x4>; |
| 378 |
mux-mask = <0x200>; |
| 379 |
#address-cells = <1>; |
| 380 |
#size-cells = <0>; |
| 381 |
mdio-parent-bus = <&mdio>; |
| 382 |
|
| 383 |
mdio_int: mdio@0 { |
| 384 |
reg = <0x0>; |
| 385 |
#address-cells = <1>; |
| 386 |
#size-cells = <0>; |
| 387 |
|
| 388 |
usb3_phy: usb3-phy@10 { |
| 389 |
compatible = "brcm,ns-bx-usb3-phy"; |
| 390 |
reg = <0x10>; |
| 391 |
usb3-dmp-syscon = <&usb3_dmp>; |
| 392 |
#phy-cells = <0>; |
| 393 |
status = "disabled"; |
| 394 |
}; |
| 395 |
}; |
| 396 |
|
| 397 |
mdio_ext: mdio@200 { |
| 398 |
reg = <0x200>; |
| 399 |
#address-cells = <1>; |
| 400 |
#size-cells = <0>; |
| 401 |
}; |
| 402 |
}; |
| 403 |
|
| 404 |
rng: rng@33000 { |
| 405 |
compatible = "brcm,bcm-nsp-rng"; |
| 406 |
reg = <0x33000 0x14>; |
| 407 |
}; |
| 408 |
|
| 409 |
ccbtimer0: timer@34000 { |
| 410 |
compatible = "arm,sp804", "arm,primecell"; |
| 411 |
reg = <0x34000 0x1000>; |
| 412 |
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, |
| 413 |
<GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; |
| 414 |
clocks = <&iprocslow>; |
| 415 |
clock-names = "apb_pclk"; |
| 416 |
}; |
| 417 |
|
| 418 |
ccbtimer1: timer@35000 { |
| 419 |
compatible = "arm,sp804", "arm,primecell"; |
| 420 |
reg = <0x35000 0x1000>; |
| 421 |
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, |
| 422 |
<GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; |
| 423 |
clocks = <&iprocslow>; |
| 424 |
clock-names = "apb_pclk"; |
| 425 |
}; |
| 426 |
|
| 427 |
srab: ethernet-switch@36000 { |
| 428 |
compatible = "brcm,nsp-srab"; |
| 429 |
reg = <0x36000 0x1000>, |
| 430 |
<0x3f308 0x8>, |
| 431 |
<0x3f410 0xc>; |
| 432 |
reg-names = "srab", "mux_config", "sgmii_config"; |
| 433 |
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, |
| 434 |
<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, |
| 435 |
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, |
| 436 |
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, |
| 437 |
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, |
| 438 |
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, |
| 439 |
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, |
| 440 |
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, |
| 441 |
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, |
| 442 |
<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, |
| 443 |
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, |
| 444 |
<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, |
| 445 |
<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; |
| 446 |
interrupt-names = "link_state_p0", |
| 447 |
"link_state_p1", |
| 448 |
"link_state_p2", |
| 449 |
"link_state_p3", |
| 450 |
"link_state_p4", |
| 451 |
"link_state_p5", |
| 452 |
"link_state_p7", |
| 453 |
"link_state_p8", |
| 454 |
"phy", |
| 455 |
"ts", |
| 456 |
"imp_sleep_timer_p5", |
| 457 |
"imp_sleep_timer_p7", |
| 458 |
"imp_sleep_timer_p8"; |
| 459 |
status = "disabled"; |
| 460 |
|
| 461 |
/* ports are defined in board DTS */ |
| 462 |
ports { |
| 463 |
#address-cells = <1>; |
| 464 |
#size-cells = <0>; |
| 465 |
}; |
| 466 |
}; |
| 467 |
|
| 468 |
i2c0: i2c@38000 { |
| 469 |
compatible = "brcm,iproc-i2c"; |
| 470 |
reg = <0x38000 0x50>; |
| 471 |
#address-cells = <1>; |
| 472 |
#size-cells = <0>; |
| 473 |
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; |
| 474 |
clock-frequency = <100000>; |
| 475 |
dma-coherent; |
| 476 |
status = "disabled"; |
| 477 |
}; |
| 478 |
|
| 479 |
watchdog@39000 { |
| 480 |
compatible = "arm,sp805", "arm,primecell"; |
| 481 |
reg = <0x39000 0x1000>; |
| 482 |
interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; |
| 483 |
clocks = <&iprocslow>, <&iprocslow>; |
| 484 |
clock-names = "wdog_clk", "apb_pclk"; |
| 485 |
}; |
| 486 |
|
| 487 |
lcpll0: lcpll0@3f100 { |
| 488 |
#clock-cells = <1>; |
| 489 |
compatible = "brcm,nsp-lcpll0"; |
| 490 |
reg = <0x3f100 0x14>; |
| 491 |
clocks = <&osc>; |
| 492 |
clock-output-names = "lcpll0", "pcie_phy", "sdio", |
| 493 |
"ddr_phy"; |
| 494 |
}; |
| 495 |
|
| 496 |
genpll: genpll@3f140 { |
| 497 |
#clock-cells = <1>; |
| 498 |
compatible = "brcm,nsp-genpll"; |
| 499 |
reg = <0x3f140 0x24>; |
| 500 |
clocks = <&osc>; |
| 501 |
clock-output-names = "genpll", "phy", "ethernetclk", |
| 502 |
"usbclk", "iprocfast", "sata1", |
| 503 |
"sata2"; |
| 504 |
}; |
| 505 |
|
| 506 |
pinctrl: pinctrl@3f1c0 { |
| 507 |
compatible = "brcm,nsp-pinmux"; |
| 508 |
reg = <0x3f1c0 0x04>, |
| 509 |
<0x30028 0x04>, |
| 510 |
<0x3f408 0x04>; |
| 511 |
}; |
| 512 |
|
| 513 |
thermal: thermal@3f2c0 { |
| 514 |
compatible = "brcm,ns-thermal"; |
| 515 |
reg = <0x3f2c0 0x10>; |
| 516 |
#thermal-sensor-cells = <0>; |
| 517 |
}; |
| 518 |
|
| 519 |
sata_phy: sata_phy@40100 { |
| 520 |
compatible = "brcm,iproc-nsp-sata-phy"; |
| 521 |
reg = <0x40100 0x340>; |
| 522 |
reg-names = "phy"; |
| 523 |
#address-cells = <1>; |
| 524 |
#size-cells = <0>; |
| 525 |
|
| 526 |
sata_phy0: sata-phy@0 { |
| 527 |
reg = <0>; |
| 528 |
#phy-cells = <0>; |
| 529 |
status = "disabled"; |
| 530 |
}; |
| 531 |
|
| 532 |
sata_phy1: sata-phy@1 { |
| 533 |
reg = <1>; |
| 534 |
#phy-cells = <0>; |
| 535 |
status = "disabled"; |
| 536 |
}; |
| 537 |
}; |
| 538 |
|
| 539 |
sata: sata@41000 { |
| 540 |
compatible = "brcm,bcm-nsp-ahci"; |
| 541 |
reg-names = "ahci", "top-ctrl"; |
| 542 |
reg = <0x41000 0x1000>, <0x40020 0x1c>; |
| 543 |
interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; |
| 544 |
#address-cells = <1>; |
| 545 |
#size-cells = <0>; |
| 546 |
dma-coherent; |
| 547 |
status = "disabled"; |
| 548 |
|
| 549 |
sata0: sata-port@0 { |
| 550 |
reg = <0>; |
| 551 |
phys = <&sata_phy0>; |
| 552 |
phy-names = "sata-phy"; |
| 553 |
}; |
| 554 |
|
| 555 |
sata1: sata-port@1 { |
| 556 |
reg = <1>; |
| 557 |
phys = <&sata_phy1>; |
| 558 |
phy-names = "sata-phy"; |
| 559 |
}; |
| 560 |
}; |
| 561 |
|
| 562 |
usb3_dmp: syscon@104000 { |
| 563 |
reg = <0x104000 0x1000>; |
| 564 |
}; |
| 565 |
}; |
| 566 |
|
| 567 |
pcie0: pcie@18012000 { |
| 568 |
compatible = "brcm,iproc-pcie"; |
| 569 |
reg = <0x18012000 0x1000>; |
| 570 |
|
| 571 |
#interrupt-cells = <1>; |
| 572 |
interrupt-map-mask = <0 0 0 0>; |
| 573 |
interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; |
| 574 |
|
| 575 |
linux,pci-domain = <0>; |
| 576 |
|
| 577 |
bus-range = <0x00 0xff>; |
| 578 |
|
| 579 |
#address-cells = <3>; |
| 580 |
#size-cells = <2>; |
| 581 |
device_type = "pci"; |
| 582 |
|
| 583 |
/* Note: The HW does not support I/O resources. So, |
| 584 |
* only the memory resource range is being specified. |
| 585 |
*/ |
| 586 |
ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>; |
| 587 |
|
| 588 |
dma-coherent; |
| 589 |
status = "disabled"; |
| 590 |
|
| 591 |
msi-parent = <&msi0>; |
| 592 |
msi0: msi { |
| 593 |
compatible = "brcm,iproc-msi"; |
| 594 |
msi-controller; |
| 595 |
interrupt-parent = <&gic>; |
| 596 |
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, |
| 597 |
<GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, |
| 598 |
<GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, |
| 599 |
<GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; |
| 600 |
brcm,pcie-msi-inten; |
| 601 |
}; |
| 602 |
}; |
| 603 |
|
| 604 |
pcie1: pcie@18013000 { |
| 605 |
compatible = "brcm,iproc-pcie"; |
| 606 |
reg = <0x18013000 0x1000>; |
| 607 |
|
| 608 |
#interrupt-cells = <1>; |
| 609 |
interrupt-map-mask = <0 0 0 0>; |
| 610 |
interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; |
| 611 |
|
| 612 |
linux,pci-domain = <1>; |
| 613 |
|
| 614 |
bus-range = <0x00 0xff>; |
| 615 |
|
| 616 |
#address-cells = <3>; |
| 617 |
#size-cells = <2>; |
| 618 |
device_type = "pci"; |
| 619 |
|
| 620 |
/* Note: The HW does not support I/O resources. So, |
| 621 |
* only the memory resource range is being specified. |
| 622 |
*/ |
| 623 |
ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>; |
| 624 |
|
| 625 |
dma-coherent; |
| 626 |
status = "disabled"; |
| 627 |
|
| 628 |
msi-parent = <&msi1>; |
| 629 |
msi1: msi { |
| 630 |
compatible = "brcm,iproc-msi"; |
| 631 |
msi-controller; |
| 632 |
interrupt-parent = <&gic>; |
| 633 |
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, |
| 634 |
<GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, |
| 635 |
<GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, |
| 636 |
<GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; |
| 637 |
brcm,pcie-msi-inten; |
| 638 |
}; |
| 639 |
}; |
| 640 |
|
| 641 |
pcie2: pcie@18014000 { |
| 642 |
compatible = "brcm,iproc-pcie"; |
| 643 |
reg = <0x18014000 0x1000>; |
| 644 |
|
| 645 |
#interrupt-cells = <1>; |
| 646 |
interrupt-map-mask = <0 0 0 0>; |
| 647 |
interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; |
| 648 |
|
| 649 |
linux,pci-domain = <2>; |
| 650 |
|
| 651 |
bus-range = <0x00 0xff>; |
| 652 |
|
| 653 |
#address-cells = <3>; |
| 654 |
#size-cells = <2>; |
| 655 |
device_type = "pci"; |
| 656 |
|
| 657 |
/* Note: The HW does not support I/O resources. So, |
| 658 |
* only the memory resource range is being specified. |
| 659 |
*/ |
| 660 |
ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>; |
| 661 |
|
| 662 |
dma-coherent; |
| 663 |
status = "disabled"; |
| 664 |
|
| 665 |
msi-parent = <&msi2>; |
| 666 |
msi2: msi { |
| 667 |
compatible = "brcm,iproc-msi"; |
| 668 |
msi-controller; |
| 669 |
interrupt-parent = <&gic>; |
| 670 |
interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, |
| 671 |
<GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, |
| 672 |
<GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, |
| 673 |
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; |
| 674 |
brcm,pcie-msi-inten; |
| 675 |
}; |
| 676 |
}; |
| 677 |
|
| 678 |
thermal-zones { |
| 679 |
cpu-thermal { |
| 680 |
polling-delay-passive = <0>; |
| 681 |
polling-delay = <1000>; |
| 682 |
coefficients = <(-556) 418000>; |
| 683 |
thermal-sensors = <&thermal>; |
| 684 |
|
| 685 |
trips { |
| 686 |
cpu-crit { |
| 687 |
temperature = <125000>; |
| 688 |
hysteresis = <0>; |
| 689 |
type = "critical"; |
| 690 |
}; |
| 691 |
}; |
| 692 |
|
| 693 |
cooling-maps { |
| 694 |
}; |
| 695 |
}; |
| 696 |
}; |
| 697 |
}; |