| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
| 2 |
/* |
| 3 |
* Broadcom BCM470X / BCM5301X ARM platform code. |
| 4 |
* DTS for Buffalo WZR-1166DHP and WZR-1166DHP2 |
| 5 |
* |
| 6 |
* Copyright (C) 2014 Rafał Miłecki <[email protected]> |
| 7 |
* Copyright (C) 2022 SHIMAMOTO Takayoshi <[email protected]> |
| 8 |
*/ |
| 9 |
|
| 10 |
|
| 11 |
#include "bcm4708.dtsi" |
| 12 |
#include "bcm5301x-nand-cs0-bch8.dtsi" |
| 13 |
#include <dt-bindings/leds/common.h> |
| 14 |
|
| 15 |
/ { |
| 16 |
spi { |
| 17 |
compatible = "spi-gpio"; |
| 18 |
num-chipselects = <1>; |
| 19 |
sck-gpios = <&chipcommon 7 0>; |
| 20 |
mosi-gpios = <&chipcommon 4 0>; |
| 21 |
cs-gpios = <&chipcommon 6 0>; |
| 22 |
#address-cells = <1>; |
| 23 |
#size-cells = <0>; |
| 24 |
|
| 25 |
hc595: gpio_spi@0 { |
| 26 |
compatible = "fairchild,74hc595"; |
| 27 |
reg = <0>; |
| 28 |
registers-number = <1>; |
| 29 |
spi-max-frequency = <100000>; |
| 30 |
|
| 31 |
gpio-controller; |
| 32 |
#gpio-cells = <2>; |
| 33 |
|
| 34 |
}; |
| 35 |
}; |
| 36 |
|
| 37 |
leds { |
| 38 |
compatible = "gpio-leds"; |
| 39 |
|
| 40 |
led-usb { |
| 41 |
/* label = "bcm53xx:blue:usb"; */ |
| 42 |
function = LED_FUNCTION_USB; |
| 43 |
color = <LED_COLOR_ID_BLUE>; |
| 44 |
gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; |
| 45 |
trigger-sources = <&ohci_port1>, <&ehci_port1>, |
| 46 |
<&xhci_port1>, <&ohci_port2>, |
| 47 |
<&ehci_port2>; |
| 48 |
linux,default-trigger = "usbport"; |
| 49 |
}; |
| 50 |
|
| 51 |
led-power0 { |
| 52 |
/* label = "bcm53xx:red:power"; */ |
| 53 |
function = LED_FUNCTION_FAULT; |
| 54 |
color = <LED_COLOR_ID_RED>; |
| 55 |
gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; |
| 56 |
}; |
| 57 |
|
| 58 |
led-power1 { |
| 59 |
/* label = "bcm53xx:white:power"; */ |
| 60 |
function = LED_FUNCTION_POWER; |
| 61 |
color = <LED_COLOR_ID_WHITE>; |
| 62 |
gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; |
| 63 |
linux,default-trigger = "default-on"; |
| 64 |
}; |
| 65 |
|
| 66 |
led-router0 { |
| 67 |
/* label = "bcm53xx:blue:router"; */ |
| 68 |
function = LED_FUNCTION_STATUS; |
| 69 |
color = <LED_COLOR_ID_BLUE>; |
| 70 |
gpios = <&hc595 3 GPIO_ACTIVE_HIGH>; |
| 71 |
linux,default-trigger = "default-on"; |
| 72 |
}; |
| 73 |
|
| 74 |
led-router1 { |
| 75 |
/* label = "bcm53xx:amber:router"; */ |
| 76 |
function = LED_FUNCTION_STATUS; |
| 77 |
color = <LED_COLOR_ID_AMBER>; |
| 78 |
gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; |
| 79 |
}; |
| 80 |
|
| 81 |
led-wan { |
| 82 |
/* label = "bcm53xx:blue:wan"; */ |
| 83 |
function = LED_FUNCTION_WAN; |
| 84 |
color = <LED_COLOR_ID_BLUE>; |
| 85 |
gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; |
| 86 |
linux,default-trigger = "default-on"; |
| 87 |
}; |
| 88 |
|
| 89 |
led-wireless0 { |
| 90 |
/* label = "bcm53xx:blue:wireless"; */ |
| 91 |
function = LED_FUNCTION_WLAN; |
| 92 |
color = <LED_COLOR_ID_BLUE>; |
| 93 |
gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; |
| 94 |
}; |
| 95 |
|
| 96 |
led-wireless1 { |
| 97 |
/* label = "bcm53xx:amber:wireless"; */ |
| 98 |
function = LED_FUNCTION_WLAN; |
| 99 |
color = <LED_COLOR_ID_AMBER>; |
| 100 |
gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; |
| 101 |
}; |
| 102 |
}; |
| 103 |
|
| 104 |
gpio-keys { |
| 105 |
compatible = "gpio-keys"; |
| 106 |
|
| 107 |
button-restart { |
| 108 |
label = "Reset"; |
| 109 |
linux,code = <KEY_RESTART>; |
| 110 |
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; |
| 111 |
}; |
| 112 |
|
| 113 |
button-aoss { |
| 114 |
label = "AOSS"; |
| 115 |
linux,code = <KEY_WPS_BUTTON>; |
| 116 |
gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; |
| 117 |
}; |
| 118 |
|
| 119 |
/* Commit mode set by switch? */ |
| 120 |
button-mode { |
| 121 |
label = "Mode"; |
| 122 |
linux,code = <KEY_SETUP>; |
| 123 |
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; |
| 124 |
}; |
| 125 |
|
| 126 |
/* Switch: AP mode */ |
| 127 |
button-sw-ap { |
| 128 |
label = "AP"; |
| 129 |
linux,code = <BTN_0>; |
| 130 |
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; |
| 131 |
}; |
| 132 |
|
| 133 |
button-eject { |
| 134 |
label = "USB eject"; |
| 135 |
linux,code = <KEY_EJECTCD>; |
| 136 |
gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; |
| 137 |
}; |
| 138 |
}; |
| 139 |
}; |
| 140 |
|
| 141 |
&usb2 { |
| 142 |
vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; |
| 143 |
}; |
| 144 |
|
| 145 |
&usb3 { |
| 146 |
vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>; |
| 147 |
}; |
| 148 |
|
| 149 |
&spi_nor { |
| 150 |
status = "okay"; |
| 151 |
}; |
| 152 |
|
| 153 |
&usb3_phy { |
| 154 |
status = "okay"; |
| 155 |
}; |
| 156 |
|
| 157 |
&srab { |
| 158 |
status = "okay"; |
| 159 |
|
| 160 |
ports { |
| 161 |
port@0 { |
| 162 |
label = "lan1"; |
| 163 |
}; |
| 164 |
|
| 165 |
port@1 { |
| 166 |
label = "lan2"; |
| 167 |
}; |
| 168 |
|
| 169 |
port@2 { |
| 170 |
label = "lan3"; |
| 171 |
}; |
| 172 |
|
| 173 |
port@3 { |
| 174 |
label = "lan4"; |
| 175 |
}; |
| 176 |
|
| 177 |
port@4 { |
| 178 |
label = "wan"; |
| 179 |
}; |
| 180 |
|
| 181 |
port@5 { |
| 182 |
label = "cpu"; |
| 183 |
}; |
| 184 |
|
| 185 |
port@7 { |
| 186 |
status = "disabled"; |
| 187 |
}; |
| 188 |
|
| 189 |
port@8 { |
| 190 |
status = "disabled"; |
| 191 |
}; |
| 192 |
}; |
| 193 |
}; |