| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
#include "bcm283x.dtsi" |
| 3 |
|
| 4 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 5 |
#include <dt-bindings/soc/bcm2835-pm.h> |
| 6 |
|
| 7 |
/ { |
| 8 |
compatible = "brcm,bcm2711"; |
| 9 |
|
| 10 |
#address-cells = <2>; |
| 11 |
#size-cells = <1>; |
| 12 |
|
| 13 |
interrupt-parent = <&gicv2>; |
| 14 |
|
| 15 |
vc4: gpu { |
| 16 |
compatible = "brcm,bcm2711-vc5"; |
| 17 |
status = "disabled"; |
| 18 |
}; |
| 19 |
|
| 20 |
clk_27MHz: clk-27M { |
| 21 |
#clock-cells = <0>; |
| 22 |
compatible = "fixed-clock"; |
| 23 |
clock-frequency = <27000000>; |
| 24 |
clock-output-names = "27MHz-clock"; |
| 25 |
}; |
| 26 |
|
| 27 |
clk_108MHz: clk-108M { |
| 28 |
#clock-cells = <0>; |
| 29 |
compatible = "fixed-clock"; |
| 30 |
clock-frequency = <108000000>; |
| 31 |
clock-output-names = "108MHz-clock"; |
| 32 |
}; |
| 33 |
|
| 34 |
soc { |
| 35 |
/* |
| 36 |
* Defined ranges: |
| 37 |
* Common BCM283x peripherals |
| 38 |
* BCM2711-specific peripherals |
| 39 |
* ARM-local peripherals |
| 40 |
*/ |
| 41 |
ranges = <0x7e000000 0x0 0xfe000000 0x01800000>, |
| 42 |
<0x7c000000 0x0 0xfc000000 0x02000000>, |
| 43 |
<0x40000000 0x0 0xff800000 0x00800000>; |
| 44 |
/* Emulate a contiguous 30-bit address range for DMA */ |
| 45 |
dma-ranges = <0xc0000000 0x0 0x00000000 0x40000000>; |
| 46 |
|
| 47 |
/* |
| 48 |
* This node is the provider for the enable-method for |
| 49 |
* bringing up secondary cores. |
| 50 |
*/ |
| 51 |
local_intc: interrupt-controller@40000000 { |
| 52 |
compatible = "brcm,bcm2836-l1-intc"; |
| 53 |
reg = <0x40000000 0x100>; |
| 54 |
}; |
| 55 |
|
| 56 |
gicv2: interrupt-controller@40041000 { |
| 57 |
interrupt-controller; |
| 58 |
#interrupt-cells = <3>; |
| 59 |
compatible = "arm,gic-400"; |
| 60 |
reg = <0x40041000 0x1000>, |
| 61 |
<0x40042000 0x2000>, |
| 62 |
<0x40044000 0x2000>, |
| 63 |
<0x40046000 0x2000>; |
| 64 |
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | |
| 65 |
IRQ_TYPE_LEVEL_HIGH)>; |
| 66 |
}; |
| 67 |
|
| 68 |
avs_monitor: avs-monitor@7d5d2000 { |
| 69 |
compatible = "brcm,bcm2711-avs-monitor", |
| 70 |
"syscon", "simple-mfd"; |
| 71 |
reg = <0x7d5d2000 0xf00>; |
| 72 |
|
| 73 |
thermal: thermal { |
| 74 |
compatible = "brcm,bcm2711-thermal"; |
| 75 |
#thermal-sensor-cells = <0>; |
| 76 |
}; |
| 77 |
}; |
| 78 |
|
| 79 |
dma: dma-controller@7e007000 { |
| 80 |
compatible = "brcm,bcm2835-dma"; |
| 81 |
reg = <0x7e007000 0xb00>; |
| 82 |
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, |
| 83 |
<GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, |
| 84 |
<GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, |
| 85 |
<GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, |
| 86 |
<GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, |
| 87 |
<GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, |
| 88 |
<GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, |
| 89 |
/* DMA lite 7 - 10 */ |
| 90 |
<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, |
| 91 |
<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, |
| 92 |
<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, |
| 93 |
<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; |
| 94 |
interrupt-names = "dma0", |
| 95 |
"dma1", |
| 96 |
"dma2", |
| 97 |
"dma3", |
| 98 |
"dma4", |
| 99 |
"dma5", |
| 100 |
"dma6", |
| 101 |
"dma7", |
| 102 |
"dma8", |
| 103 |
"dma9", |
| 104 |
"dma10"; |
| 105 |
#dma-cells = <1>; |
| 106 |
brcm,dma-channel-mask = <0x07f5>; |
| 107 |
}; |
| 108 |
|
| 109 |
pm: watchdog@7e100000 { |
| 110 |
compatible = "brcm,bcm2711-pm", "brcm,bcm2835-pm-wdt"; |
| 111 |
#power-domain-cells = <1>; |
| 112 |
#reset-cells = <1>; |
| 113 |
reg = <0x7e100000 0x114>, |
| 114 |
<0x7e00a000 0x24>, |
| 115 |
<0x7ec11000 0x20>; |
| 116 |
reg-names = "pm", "asb", "rpivid_asb"; |
| 117 |
clocks = <&clocks BCM2835_CLOCK_V3D>, |
| 118 |
<&clocks BCM2835_CLOCK_PERI_IMAGE>, |
| 119 |
<&clocks BCM2835_CLOCK_H264>, |
| 120 |
<&clocks BCM2835_CLOCK_ISP>; |
| 121 |
clock-names = "v3d", "peri_image", "h264", "isp"; |
| 122 |
system-power-controller; |
| 123 |
}; |
| 124 |
|
| 125 |
rng@7e104000 { |
| 126 |
compatible = "brcm,bcm2711-rng200"; |
| 127 |
reg = <0x7e104000 0x28>; |
| 128 |
}; |
| 129 |
|
| 130 |
uart2: serial@7e201400 { |
| 131 |
compatible = "arm,pl011", "arm,primecell"; |
| 132 |
reg = <0x7e201400 0x200>; |
| 133 |
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; |
| 134 |
clocks = <&clocks BCM2835_CLOCK_UART>, |
| 135 |
<&clocks BCM2835_CLOCK_VPU>; |
| 136 |
clock-names = "uartclk", "apb_pclk"; |
| 137 |
arm,primecell-periphid = <0x00341011>; |
| 138 |
status = "disabled"; |
| 139 |
}; |
| 140 |
|
| 141 |
uart3: serial@7e201600 { |
| 142 |
compatible = "arm,pl011", "arm,primecell"; |
| 143 |
reg = <0x7e201600 0x200>; |
| 144 |
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; |
| 145 |
clocks = <&clocks BCM2835_CLOCK_UART>, |
| 146 |
<&clocks BCM2835_CLOCK_VPU>; |
| 147 |
clock-names = "uartclk", "apb_pclk"; |
| 148 |
arm,primecell-periphid = <0x00341011>; |
| 149 |
status = "disabled"; |
| 150 |
}; |
| 151 |
|
| 152 |
uart4: serial@7e201800 { |
| 153 |
compatible = "arm,pl011", "arm,primecell"; |
| 154 |
reg = <0x7e201800 0x200>; |
| 155 |
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; |
| 156 |
clocks = <&clocks BCM2835_CLOCK_UART>, |
| 157 |
<&clocks BCM2835_CLOCK_VPU>; |
| 158 |
clock-names = "uartclk", "apb_pclk"; |
| 159 |
arm,primecell-periphid = <0x00341011>; |
| 160 |
status = "disabled"; |
| 161 |
}; |
| 162 |
|
| 163 |
uart5: serial@7e201a00 { |
| 164 |
compatible = "arm,pl011", "arm,primecell"; |
| 165 |
reg = <0x7e201a00 0x200>; |
| 166 |
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; |
| 167 |
clocks = <&clocks BCM2835_CLOCK_UART>, |
| 168 |
<&clocks BCM2835_CLOCK_VPU>; |
| 169 |
clock-names = "uartclk", "apb_pclk"; |
| 170 |
arm,primecell-periphid = <0x00341011>; |
| 171 |
status = "disabled"; |
| 172 |
}; |
| 173 |
|
| 174 |
spi3: spi@7e204600 { |
| 175 |
compatible = "brcm,bcm2835-spi"; |
| 176 |
reg = <0x7e204600 0x0200>; |
| 177 |
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; |
| 178 |
clocks = <&clocks BCM2835_CLOCK_VPU>; |
| 179 |
#address-cells = <1>; |
| 180 |
#size-cells = <0>; |
| 181 |
status = "disabled"; |
| 182 |
}; |
| 183 |
|
| 184 |
spi4: spi@7e204800 { |
| 185 |
compatible = "brcm,bcm2835-spi"; |
| 186 |
reg = <0x7e204800 0x0200>; |
| 187 |
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; |
| 188 |
clocks = <&clocks BCM2835_CLOCK_VPU>; |
| 189 |
#address-cells = <1>; |
| 190 |
#size-cells = <0>; |
| 191 |
status = "disabled"; |
| 192 |
}; |
| 193 |
|
| 194 |
spi5: spi@7e204a00 { |
| 195 |
compatible = "brcm,bcm2835-spi"; |
| 196 |
reg = <0x7e204a00 0x0200>; |
| 197 |
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; |
| 198 |
clocks = <&clocks BCM2835_CLOCK_VPU>; |
| 199 |
#address-cells = <1>; |
| 200 |
#size-cells = <0>; |
| 201 |
status = "disabled"; |
| 202 |
}; |
| 203 |
|
| 204 |
spi6: spi@7e204c00 { |
| 205 |
compatible = "brcm,bcm2835-spi"; |
| 206 |
reg = <0x7e204c00 0x0200>; |
| 207 |
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; |
| 208 |
clocks = <&clocks BCM2835_CLOCK_VPU>; |
| 209 |
#address-cells = <1>; |
| 210 |
#size-cells = <0>; |
| 211 |
status = "disabled"; |
| 212 |
}; |
| 213 |
|
| 214 |
i2c3: i2c@7e205600 { |
| 215 |
compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; |
| 216 |
reg = <0x7e205600 0x200>; |
| 217 |
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; |
| 218 |
clocks = <&clocks BCM2835_CLOCK_VPU>; |
| 219 |
#address-cells = <1>; |
| 220 |
#size-cells = <0>; |
| 221 |
status = "disabled"; |
| 222 |
}; |
| 223 |
|
| 224 |
i2c4: i2c@7e205800 { |
| 225 |
compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; |
| 226 |
reg = <0x7e205800 0x200>; |
| 227 |
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; |
| 228 |
clocks = <&clocks BCM2835_CLOCK_VPU>; |
| 229 |
#address-cells = <1>; |
| 230 |
#size-cells = <0>; |
| 231 |
status = "disabled"; |
| 232 |
}; |
| 233 |
|
| 234 |
i2c5: i2c@7e205a00 { |
| 235 |
compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; |
| 236 |
reg = <0x7e205a00 0x200>; |
| 237 |
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; |
| 238 |
clocks = <&clocks BCM2835_CLOCK_VPU>; |
| 239 |
#address-cells = <1>; |
| 240 |
#size-cells = <0>; |
| 241 |
status = "disabled"; |
| 242 |
}; |
| 243 |
|
| 244 |
i2c6: i2c@7e205c00 { |
| 245 |
compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; |
| 246 |
reg = <0x7e205c00 0x200>; |
| 247 |
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; |
| 248 |
clocks = <&clocks BCM2835_CLOCK_VPU>; |
| 249 |
#address-cells = <1>; |
| 250 |
#size-cells = <0>; |
| 251 |
status = "disabled"; |
| 252 |
}; |
| 253 |
|
| 254 |
pixelvalve0: pixelvalve@7e206000 { |
| 255 |
compatible = "brcm,bcm2711-pixelvalve0"; |
| 256 |
reg = <0x7e206000 0x100>; |
| 257 |
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; |
| 258 |
status = "disabled"; |
| 259 |
}; |
| 260 |
|
| 261 |
pixelvalve1: pixelvalve@7e207000 { |
| 262 |
compatible = "brcm,bcm2711-pixelvalve1"; |
| 263 |
reg = <0x7e207000 0x100>; |
| 264 |
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; |
| 265 |
status = "disabled"; |
| 266 |
}; |
| 267 |
|
| 268 |
pixelvalve2: pixelvalve@7e20a000 { |
| 269 |
compatible = "brcm,bcm2711-pixelvalve2"; |
| 270 |
reg = <0x7e20a000 0x100>; |
| 271 |
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; |
| 272 |
status = "disabled"; |
| 273 |
}; |
| 274 |
|
| 275 |
pwm1: pwm@7e20c800 { |
| 276 |
compatible = "brcm,bcm2835-pwm"; |
| 277 |
reg = <0x7e20c800 0x28>; |
| 278 |
clocks = <&clocks BCM2835_CLOCK_PWM>; |
| 279 |
assigned-clocks = <&clocks BCM2835_CLOCK_PWM>; |
| 280 |
assigned-clock-rates = <10000000>; |
| 281 |
#pwm-cells = <3>; |
| 282 |
status = "disabled"; |
| 283 |
}; |
| 284 |
|
| 285 |
pixelvalve4: pixelvalve@7e216000 { |
| 286 |
compatible = "brcm,bcm2711-pixelvalve4"; |
| 287 |
reg = <0x7e216000 0x100>; |
| 288 |
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; |
| 289 |
status = "disabled"; |
| 290 |
}; |
| 291 |
|
| 292 |
hvs: hvs@7e400000 { |
| 293 |
compatible = "brcm,bcm2711-hvs"; |
| 294 |
reg = <0x7e400000 0x8000>; |
| 295 |
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| 296 |
}; |
| 297 |
|
| 298 |
pixelvalve3: pixelvalve@7ec12000 { |
| 299 |
compatible = "brcm,bcm2711-pixelvalve3"; |
| 300 |
reg = <0x7ec12000 0x100>; |
| 301 |
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; |
| 302 |
status = "disabled"; |
| 303 |
}; |
| 304 |
|
| 305 |
vec: vec@7ec13000 { |
| 306 |
compatible = "brcm,bcm2711-vec"; |
| 307 |
reg = <0x7ec13000 0x1000>; |
| 308 |
clocks = <&clocks BCM2835_CLOCK_VEC>; |
| 309 |
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; |
| 310 |
status = "disabled"; |
| 311 |
}; |
| 312 |
|
| 313 |
dvp: clock@7ef00000 { |
| 314 |
compatible = "brcm,brcm2711-dvp"; |
| 315 |
reg = <0x7ef00000 0x10>; |
| 316 |
clocks = <&clk_108MHz>; |
| 317 |
#clock-cells = <1>; |
| 318 |
#reset-cells = <1>; |
| 319 |
}; |
| 320 |
|
| 321 |
aon_intr: interrupt-controller@7ef00100 { |
| 322 |
compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc"; |
| 323 |
reg = <0x7ef00100 0x30>; |
| 324 |
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| 325 |
interrupt-controller; |
| 326 |
#interrupt-cells = <1>; |
| 327 |
}; |
| 328 |
|
| 329 |
hdmi0: hdmi@7ef00700 { |
| 330 |
compatible = "brcm,bcm2711-hdmi0"; |
| 331 |
reg = <0x7ef00700 0x300>, |
| 332 |
<0x7ef00300 0x200>, |
| 333 |
<0x7ef00f00 0x80>, |
| 334 |
<0x7ef00f80 0x80>, |
| 335 |
<0x7ef01b00 0x200>, |
| 336 |
<0x7ef01f00 0x400>, |
| 337 |
<0x7ef00200 0x80>, |
| 338 |
<0x7ef04300 0x100>, |
| 339 |
<0x7ef20000 0x100>; |
| 340 |
reg-names = "hdmi", |
| 341 |
"dvp", |
| 342 |
"phy", |
| 343 |
"rm", |
| 344 |
"packet", |
| 345 |
"metadata", |
| 346 |
"csc", |
| 347 |
"cec", |
| 348 |
"hd"; |
| 349 |
clock-names = "hdmi", "bvb", "audio", "cec"; |
| 350 |
resets = <&dvp 0>; |
| 351 |
interrupt-parent = <&aon_intr>; |
| 352 |
interrupts = <0>, <1>, <2>, |
| 353 |
<3>, <4>, <5>; |
| 354 |
interrupt-names = "cec-tx", "cec-rx", "cec-low", |
| 355 |
"wakeup", "hpd-connected", "hpd-removed"; |
| 356 |
ddc = <&ddc0>; |
| 357 |
dmas = <&dma 10>; |
| 358 |
dma-names = "audio-rx"; |
| 359 |
status = "disabled"; |
| 360 |
}; |
| 361 |
|
| 362 |
ddc0: i2c@7ef04500 { |
| 363 |
compatible = "brcm,bcm2711-hdmi-i2c"; |
| 364 |
reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>; |
| 365 |
reg-names = "bsc", "auto-i2c"; |
| 366 |
clock-frequency = <97500>; |
| 367 |
status = "disabled"; |
| 368 |
}; |
| 369 |
|
| 370 |
hdmi1: hdmi@7ef05700 { |
| 371 |
compatible = "brcm,bcm2711-hdmi1"; |
| 372 |
reg = <0x7ef05700 0x300>, |
| 373 |
<0x7ef05300 0x200>, |
| 374 |
<0x7ef05f00 0x80>, |
| 375 |
<0x7ef05f80 0x80>, |
| 376 |
<0x7ef06b00 0x200>, |
| 377 |
<0x7ef06f00 0x400>, |
| 378 |
<0x7ef00280 0x80>, |
| 379 |
<0x7ef09300 0x100>, |
| 380 |
<0x7ef20000 0x100>; |
| 381 |
reg-names = "hdmi", |
| 382 |
"dvp", |
| 383 |
"phy", |
| 384 |
"rm", |
| 385 |
"packet", |
| 386 |
"metadata", |
| 387 |
"csc", |
| 388 |
"cec", |
| 389 |
"hd"; |
| 390 |
ddc = <&ddc1>; |
| 391 |
clock-names = "hdmi", "bvb", "audio", "cec"; |
| 392 |
resets = <&dvp 1>; |
| 393 |
interrupt-parent = <&aon_intr>; |
| 394 |
interrupts = <8>, <7>, <6>, |
| 395 |
<9>, <10>, <11>; |
| 396 |
interrupt-names = "cec-tx", "cec-rx", "cec-low", |
| 397 |
"wakeup", "hpd-connected", "hpd-removed"; |
| 398 |
dmas = <&dma 17>; |
| 399 |
dma-names = "audio-rx"; |
| 400 |
status = "disabled"; |
| 401 |
}; |
| 402 |
|
| 403 |
ddc1: i2c@7ef09500 { |
| 404 |
compatible = "brcm,bcm2711-hdmi-i2c"; |
| 405 |
reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>; |
| 406 |
reg-names = "bsc", "auto-i2c"; |
| 407 |
clock-frequency = <97500>; |
| 408 |
status = "disabled"; |
| 409 |
}; |
| 410 |
}; |
| 411 |
|
| 412 |
/* |
| 413 |
* emmc2 has different DMA constraints based on SoC revisions. It was |
| 414 |
* moved into its own bus, so as for RPi4's firmware to update them. |
| 415 |
* The firmware will find whether the emmc2bus alias is defined, and if |
| 416 |
* so, it'll edit the dma-ranges property below accordingly. |
| 417 |
*/ |
| 418 |
emmc2bus: emmc2-bus@fe000000 { |
| 419 |
compatible = "simple-bus"; |
| 420 |
#address-cells = <2>; |
| 421 |
#size-cells = <1>; |
| 422 |
|
| 423 |
ranges = <0x0 0x7e000000 0x0 0xfe000000 0x01800000>; |
| 424 |
dma-ranges = <0x0 0xc0000000 0x0 0x00000000 0x40000000>; |
| 425 |
|
| 426 |
emmc2: mmc@7e340000 { |
| 427 |
compatible = "brcm,bcm2711-emmc2"; |
| 428 |
reg = <0x0 0x7e340000 0x100>; |
| 429 |
interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; |
| 430 |
clocks = <&clocks BCM2711_CLOCK_EMMC2>; |
| 431 |
status = "disabled"; |
| 432 |
}; |
| 433 |
}; |
| 434 |
|
| 435 |
pmu { |
| 436 |
compatible = "arm,cortex-a72-pmu"; |
| 437 |
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, |
| 438 |
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, |
| 439 |
<GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, |
| 440 |
<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; |
| 441 |
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; |
| 442 |
}; |
| 443 |
|
| 444 |
timer { |
| 445 |
compatible = "arm,armv8-timer"; |
| 446 |
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | |
| 447 |
IRQ_TYPE_LEVEL_LOW)>, |
| 448 |
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | |
| 449 |
IRQ_TYPE_LEVEL_LOW)>, |
| 450 |
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | |
| 451 |
IRQ_TYPE_LEVEL_LOW)>, |
| 452 |
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | |
| 453 |
IRQ_TYPE_LEVEL_LOW)>; |
| 454 |
}; |
| 455 |
|
| 456 |
cpus: cpus { |
| 457 |
#address-cells = <1>; |
| 458 |
#size-cells = <0>; |
| 459 |
enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit |
| 460 |
|
| 461 |
/* Source for d/i-cache-line-size and d/i-cache-sets |
| 462 |
* https://developer.arm.com/documentation/100095/0003 |
| 463 |
* /Level-1-Memory-System/About-the-L1-memory-system?lang=en |
| 464 |
* Source for d/i-cache-size |
| 465 |
* https://www.raspberrypi.com/documentation/computers |
| 466 |
* /processors.html#bcm2711 |
| 467 |
*/ |
| 468 |
cpu0: cpu@0 { |
| 469 |
device_type = "cpu"; |
| 470 |
compatible = "arm,cortex-a72"; |
| 471 |
reg = <0>; |
| 472 |
enable-method = "spin-table"; |
| 473 |
cpu-release-addr = <0x0 0x000000d8>; |
| 474 |
d-cache-size = <0x8000>; |
| 475 |
d-cache-line-size = <64>; |
| 476 |
d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set |
| 477 |
i-cache-size = <0xc000>; |
| 478 |
i-cache-line-size = <64>; |
| 479 |
i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set |
| 480 |
next-level-cache = <&l2>; |
| 481 |
}; |
| 482 |
|
| 483 |
cpu1: cpu@1 { |
| 484 |
device_type = "cpu"; |
| 485 |
compatible = "arm,cortex-a72"; |
| 486 |
reg = <1>; |
| 487 |
enable-method = "spin-table"; |
| 488 |
cpu-release-addr = <0x0 0x000000e0>; |
| 489 |
d-cache-size = <0x8000>; |
| 490 |
d-cache-line-size = <64>; |
| 491 |
d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set |
| 492 |
i-cache-size = <0xc000>; |
| 493 |
i-cache-line-size = <64>; |
| 494 |
i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set |
| 495 |
next-level-cache = <&l2>; |
| 496 |
}; |
| 497 |
|
| 498 |
cpu2: cpu@2 { |
| 499 |
device_type = "cpu"; |
| 500 |
compatible = "arm,cortex-a72"; |
| 501 |
reg = <2>; |
| 502 |
enable-method = "spin-table"; |
| 503 |
cpu-release-addr = <0x0 0x000000e8>; |
| 504 |
d-cache-size = <0x8000>; |
| 505 |
d-cache-line-size = <64>; |
| 506 |
d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set |
| 507 |
i-cache-size = <0xc000>; |
| 508 |
i-cache-line-size = <64>; |
| 509 |
i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set |
| 510 |
next-level-cache = <&l2>; |
| 511 |
}; |
| 512 |
|
| 513 |
cpu3: cpu@3 { |
| 514 |
device_type = "cpu"; |
| 515 |
compatible = "arm,cortex-a72"; |
| 516 |
reg = <3>; |
| 517 |
enable-method = "spin-table"; |
| 518 |
cpu-release-addr = <0x0 0x000000f0>; |
| 519 |
d-cache-size = <0x8000>; |
| 520 |
d-cache-line-size = <64>; |
| 521 |
d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set |
| 522 |
i-cache-size = <0xc000>; |
| 523 |
i-cache-line-size = <64>; |
| 524 |
i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set |
| 525 |
next-level-cache = <&l2>; |
| 526 |
}; |
| 527 |
|
| 528 |
/* Source for d/i-cache-line-size and d/i-cache-sets |
| 529 |
* https://developer.arm.com/documentation/100095/0003 |
| 530 |
* /Level-2-Memory-System/About-the-L2-memory-system?lang=en |
| 531 |
* Source for d/i-cache-size |
| 532 |
* https://www.raspberrypi.com/documentation/computers |
| 533 |
* /processors.html#bcm2711 |
| 534 |
*/ |
| 535 |
l2: l2-cache0 { |
| 536 |
compatible = "cache"; |
| 537 |
cache-unified; |
| 538 |
cache-size = <0x100000>; |
| 539 |
cache-line-size = <64>; |
| 540 |
cache-sets = <1024>; // 1MiB(size)/64(line-size)=16384ways/16-way set |
| 541 |
cache-level = <2>; |
| 542 |
}; |
| 543 |
}; |
| 544 |
|
| 545 |
scb-bus@fc000000 { |
| 546 |
compatible = "simple-bus"; |
| 547 |
#address-cells = <2>; |
| 548 |
#size-cells = <1>; |
| 549 |
|
| 550 |
ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>, |
| 551 |
<0x6 0x00000000 0x6 0x00000000 0x40000000>; |
| 552 |
|
| 553 |
pcie0: pcie@7d500000 { |
| 554 |
compatible = "brcm,bcm2711-pcie"; |
| 555 |
reg = <0x0 0x7d500000 0x9310>; |
| 556 |
device_type = "pci"; |
| 557 |
#address-cells = <3>; |
| 558 |
#interrupt-cells = <1>; |
| 559 |
#size-cells = <2>; |
| 560 |
interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, |
| 561 |
<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; |
| 562 |
interrupt-names = "pcie", "msi"; |
| 563 |
interrupt-map-mask = <0x0 0x0 0x0 0x7>; |
| 564 |
interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 |
| 565 |
IRQ_TYPE_LEVEL_HIGH>, |
| 566 |
<0 0 0 2 &gicv2 GIC_SPI 144 |
| 567 |
IRQ_TYPE_LEVEL_HIGH>, |
| 568 |
<0 0 0 3 &gicv2 GIC_SPI 145 |
| 569 |
IRQ_TYPE_LEVEL_HIGH>, |
| 570 |
<0 0 0 4 &gicv2 GIC_SPI 146 |
| 571 |
IRQ_TYPE_LEVEL_HIGH>; |
| 572 |
msi-controller; |
| 573 |
msi-parent = <&pcie0>; |
| 574 |
|
| 575 |
ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 |
| 576 |
0x0 0x04000000>; |
| 577 |
/* |
| 578 |
* The wrapper around the PCIe block has a bug |
| 579 |
* preventing it from accessing beyond the first 3GB of |
| 580 |
* memory. |
| 581 |
*/ |
| 582 |
dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 |
| 583 |
0x0 0xc0000000>; |
| 584 |
brcm,enable-ssc; |
| 585 |
}; |
| 586 |
|
| 587 |
genet: ethernet@7d580000 { |
| 588 |
compatible = "brcm,bcm2711-genet-v5"; |
| 589 |
reg = <0x0 0x7d580000 0x10000>; |
| 590 |
#address-cells = <0x1>; |
| 591 |
#size-cells = <0x1>; |
| 592 |
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, |
| 593 |
<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; |
| 594 |
status = "disabled"; |
| 595 |
|
| 596 |
genet_mdio: mdio@e14 { |
| 597 |
compatible = "brcm,genet-mdio-v5"; |
| 598 |
reg = <0xe14 0x8>; |
| 599 |
reg-names = "mdio"; |
| 600 |
#address-cells = <0x1>; |
| 601 |
#size-cells = <0x0>; |
| 602 |
}; |
| 603 |
}; |
| 604 |
|
| 605 |
xhci: usb@7e9c0000 { |
| 606 |
compatible = "brcm,bcm2711-xhci", "brcm,xhci-brcm-v2"; |
| 607 |
reg = <0x0 0x7e9c0000 0x100000>; |
| 608 |
#address-cells = <1>; |
| 609 |
#size-cells = <0>; |
| 610 |
interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; |
| 611 |
power-domains = <&pm BCM2835_POWER_DOMAIN_USB>; |
| 612 |
/* DWC2 and this IP block share the same USB PHY, |
| 613 |
* enabling both at the same time results in lockups. |
| 614 |
* So keep this node disabled and let the bootloader |
| 615 |
* decide which interface should be enabled. |
| 616 |
*/ |
| 617 |
status = "disabled"; |
| 618 |
}; |
| 619 |
|
| 620 |
v3d: gpu@7ec00000 { |
| 621 |
compatible = "brcm,2711-v3d"; |
| 622 |
reg = <0x0 0x7ec00000 0x4000>, |
| 623 |
<0x0 0x7ec04000 0x4000>; |
| 624 |
reg-names = "hub", "core0"; |
| 625 |
|
| 626 |
power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; |
| 627 |
resets = <&pm BCM2835_RESET_V3D>; |
| 628 |
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; |
| 629 |
}; |
| 630 |
}; |
| 631 |
}; |
| 632 |
|
| 633 |
&clk_osc { |
| 634 |
clock-frequency = <54000000>; |
| 635 |
}; |
| 636 |
|
| 637 |
&clocks { |
| 638 |
compatible = "brcm,bcm2711-cprman"; |
| 639 |
}; |
| 640 |
|
| 641 |
&cpu_thermal { |
| 642 |
coefficients = <(-487) 410040>; |
| 643 |
thermal-sensors = <&thermal>; |
| 644 |
}; |
| 645 |
|
| 646 |
&dsi0 { |
| 647 |
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; |
| 648 |
}; |
| 649 |
|
| 650 |
&dsi1 { |
| 651 |
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; |
| 652 |
compatible = "brcm,bcm2711-dsi1"; |
| 653 |
}; |
| 654 |
|
| 655 |
&gpio { |
| 656 |
compatible = "brcm,bcm2711-gpio"; |
| 657 |
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, |
| 658 |
<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, |
| 659 |
<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, |
| 660 |
<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; |
| 661 |
|
| 662 |
gpio-ranges = <&gpio 0 0 58>; |
| 663 |
|
| 664 |
gpclk0_gpio49: gpclk0-gpio49 { |
| 665 |
pin-gpclk { |
| 666 |
pins = "gpio49"; |
| 667 |
function = "alt1"; |
| 668 |
bias-disable; |
| 669 |
}; |
| 670 |
}; |
| 671 |
gpclk1_gpio50: gpclk1-gpio50 { |
| 672 |
pin-gpclk { |
| 673 |
pins = "gpio50"; |
| 674 |
function = "alt1"; |
| 675 |
bias-disable; |
| 676 |
}; |
| 677 |
}; |
| 678 |
gpclk2_gpio51: gpclk2-gpio51 { |
| 679 |
pin-gpclk { |
| 680 |
pins = "gpio51"; |
| 681 |
function = "alt1"; |
| 682 |
bias-disable; |
| 683 |
}; |
| 684 |
}; |
| 685 |
|
| 686 |
i2c0_gpio46: i2c0-gpio46 { |
| 687 |
pin-sda { |
| 688 |
function = "alt0"; |
| 689 |
pins = "gpio46"; |
| 690 |
bias-pull-up; |
| 691 |
}; |
| 692 |
pin-scl { |
| 693 |
function = "alt0"; |
| 694 |
pins = "gpio47"; |
| 695 |
bias-disable; |
| 696 |
}; |
| 697 |
}; |
| 698 |
i2c1_gpio46: i2c1-gpio46 { |
| 699 |
pin-sda { |
| 700 |
function = "alt1"; |
| 701 |
pins = "gpio46"; |
| 702 |
bias-pull-up; |
| 703 |
}; |
| 704 |
pin-scl { |
| 705 |
function = "alt1"; |
| 706 |
pins = "gpio47"; |
| 707 |
bias-disable; |
| 708 |
}; |
| 709 |
}; |
| 710 |
i2c3_gpio2: i2c3-gpio2 { |
| 711 |
pin-sda { |
| 712 |
function = "alt5"; |
| 713 |
pins = "gpio2"; |
| 714 |
bias-pull-up; |
| 715 |
}; |
| 716 |
pin-scl { |
| 717 |
function = "alt5"; |
| 718 |
pins = "gpio3"; |
| 719 |
bias-disable; |
| 720 |
}; |
| 721 |
}; |
| 722 |
i2c3_gpio4: i2c3-gpio4 { |
| 723 |
pin-sda { |
| 724 |
function = "alt5"; |
| 725 |
pins = "gpio4"; |
| 726 |
bias-pull-up; |
| 727 |
}; |
| 728 |
pin-scl { |
| 729 |
function = "alt5"; |
| 730 |
pins = "gpio5"; |
| 731 |
bias-disable; |
| 732 |
}; |
| 733 |
}; |
| 734 |
i2c4_gpio6: i2c4-gpio6 { |
| 735 |
pin-sda { |
| 736 |
function = "alt5"; |
| 737 |
pins = "gpio6"; |
| 738 |
bias-pull-up; |
| 739 |
}; |
| 740 |
pin-scl { |
| 741 |
function = "alt5"; |
| 742 |
pins = "gpio7"; |
| 743 |
bias-disable; |
| 744 |
}; |
| 745 |
}; |
| 746 |
i2c4_gpio8: i2c4-gpio8 { |
| 747 |
pin-sda { |
| 748 |
function = "alt5"; |
| 749 |
pins = "gpio8"; |
| 750 |
bias-pull-up; |
| 751 |
}; |
| 752 |
pin-scl { |
| 753 |
function = "alt5"; |
| 754 |
pins = "gpio9"; |
| 755 |
bias-disable; |
| 756 |
}; |
| 757 |
}; |
| 758 |
i2c5_gpio10: i2c5-gpio10 { |
| 759 |
pin-sda { |
| 760 |
function = "alt5"; |
| 761 |
pins = "gpio10"; |
| 762 |
bias-pull-up; |
| 763 |
}; |
| 764 |
pin-scl { |
| 765 |
function = "alt5"; |
| 766 |
pins = "gpio11"; |
| 767 |
bias-disable; |
| 768 |
}; |
| 769 |
}; |
| 770 |
i2c5_gpio12: i2c5-gpio12 { |
| 771 |
pin-sda { |
| 772 |
function = "alt5"; |
| 773 |
pins = "gpio12"; |
| 774 |
bias-pull-up; |
| 775 |
}; |
| 776 |
pin-scl { |
| 777 |
function = "alt5"; |
| 778 |
pins = "gpio13"; |
| 779 |
bias-disable; |
| 780 |
}; |
| 781 |
}; |
| 782 |
i2c6_gpio0: i2c6-gpio0 { |
| 783 |
pin-sda { |
| 784 |
function = "alt5"; |
| 785 |
pins = "gpio0"; |
| 786 |
bias-pull-up; |
| 787 |
}; |
| 788 |
pin-scl { |
| 789 |
function = "alt5"; |
| 790 |
pins = "gpio1"; |
| 791 |
bias-disable; |
| 792 |
}; |
| 793 |
}; |
| 794 |
i2c6_gpio22: i2c6-gpio22 { |
| 795 |
pin-sda { |
| 796 |
function = "alt5"; |
| 797 |
pins = "gpio22"; |
| 798 |
bias-pull-up; |
| 799 |
}; |
| 800 |
pin-scl { |
| 801 |
function = "alt5"; |
| 802 |
pins = "gpio23"; |
| 803 |
bias-disable; |
| 804 |
}; |
| 805 |
}; |
| 806 |
i2c_slave_gpio8: i2c-slave-gpio8 { |
| 807 |
pins-i2c-slave { |
| 808 |
pins = "gpio8", |
| 809 |
"gpio9", |
| 810 |
"gpio10", |
| 811 |
"gpio11"; |
| 812 |
function = "alt3"; |
| 813 |
}; |
| 814 |
}; |
| 815 |
|
| 816 |
jtag_gpio48: jtag-gpio48 { |
| 817 |
pins-jtag { |
| 818 |
pins = "gpio48", |
| 819 |
"gpio49", |
| 820 |
"gpio50", |
| 821 |
"gpio51", |
| 822 |
"gpio52", |
| 823 |
"gpio53"; |
| 824 |
function = "alt4"; |
| 825 |
}; |
| 826 |
}; |
| 827 |
|
| 828 |
mii_gpio28: mii-gpio28 { |
| 829 |
pins-mii { |
| 830 |
pins = "gpio28", |
| 831 |
"gpio29", |
| 832 |
"gpio30", |
| 833 |
"gpio31"; |
| 834 |
function = "alt4"; |
| 835 |
}; |
| 836 |
}; |
| 837 |
mii_gpio36: mii-gpio36 { |
| 838 |
pins-mii { |
| 839 |
pins = "gpio36", |
| 840 |
"gpio37", |
| 841 |
"gpio38", |
| 842 |
"gpio39"; |
| 843 |
function = "alt5"; |
| 844 |
}; |
| 845 |
}; |
| 846 |
|
| 847 |
pcm_gpio50: pcm-gpio50 { |
| 848 |
pins-pcm { |
| 849 |
pins = "gpio50", |
| 850 |
"gpio51", |
| 851 |
"gpio52", |
| 852 |
"gpio53"; |
| 853 |
function = "alt2"; |
| 854 |
}; |
| 855 |
}; |
| 856 |
|
| 857 |
pwm0_0_gpio12: pwm0-0-gpio12 { |
| 858 |
pin-pwm { |
| 859 |
pins = "gpio12"; |
| 860 |
function = "alt0"; |
| 861 |
bias-disable; |
| 862 |
}; |
| 863 |
}; |
| 864 |
pwm0_0_gpio18: pwm0-0-gpio18 { |
| 865 |
pin-pwm { |
| 866 |
pins = "gpio18"; |
| 867 |
function = "alt5"; |
| 868 |
bias-disable; |
| 869 |
}; |
| 870 |
}; |
| 871 |
pwm1_0_gpio40: pwm1-0-gpio40 { |
| 872 |
pin-pwm { |
| 873 |
pins = "gpio40"; |
| 874 |
function = "alt0"; |
| 875 |
bias-disable; |
| 876 |
}; |
| 877 |
}; |
| 878 |
pwm0_1_gpio13: pwm0-1-gpio13 { |
| 879 |
pin-pwm { |
| 880 |
pins = "gpio13"; |
| 881 |
function = "alt0"; |
| 882 |
bias-disable; |
| 883 |
}; |
| 884 |
}; |
| 885 |
pwm0_1_gpio19: pwm0-1-gpio19 { |
| 886 |
pin-pwm { |
| 887 |
pins = "gpio19"; |
| 888 |
function = "alt5"; |
| 889 |
bias-disable; |
| 890 |
}; |
| 891 |
}; |
| 892 |
pwm1_1_gpio41: pwm1-1-gpio41 { |
| 893 |
pin-pwm { |
| 894 |
pins = "gpio41"; |
| 895 |
function = "alt0"; |
| 896 |
bias-disable; |
| 897 |
}; |
| 898 |
}; |
| 899 |
pwm0_1_gpio45: pwm0-1-gpio45 { |
| 900 |
pin-pwm { |
| 901 |
pins = "gpio45"; |
| 902 |
function = "alt0"; |
| 903 |
bias-disable; |
| 904 |
}; |
| 905 |
}; |
| 906 |
pwm0_0_gpio52: pwm0-0-gpio52 { |
| 907 |
pin-pwm { |
| 908 |
pins = "gpio52"; |
| 909 |
function = "alt1"; |
| 910 |
bias-disable; |
| 911 |
}; |
| 912 |
}; |
| 913 |
pwm0_1_gpio53: pwm0-1-gpio53 { |
| 914 |
pin-pwm { |
| 915 |
pins = "gpio53"; |
| 916 |
function = "alt1"; |
| 917 |
bias-disable; |
| 918 |
}; |
| 919 |
}; |
| 920 |
|
| 921 |
rgmii_gpio35: rgmii-gpio35 { |
| 922 |
pin-start-stop { |
| 923 |
pins = "gpio35"; |
| 924 |
function = "alt4"; |
| 925 |
}; |
| 926 |
pin-rx-ok { |
| 927 |
pins = "gpio36"; |
| 928 |
function = "alt4"; |
| 929 |
}; |
| 930 |
}; |
| 931 |
rgmii_irq_gpio34: rgmii-irq-gpio34 { |
| 932 |
pin-irq { |
| 933 |
pins = "gpio34"; |
| 934 |
function = "alt5"; |
| 935 |
}; |
| 936 |
}; |
| 937 |
rgmii_irq_gpio39: rgmii-irq-gpio39 { |
| 938 |
pin-irq { |
| 939 |
pins = "gpio39"; |
| 940 |
function = "alt4"; |
| 941 |
}; |
| 942 |
}; |
| 943 |
rgmii_mdio_gpio28: rgmii-mdio-gpio28 { |
| 944 |
pins-mdio { |
| 945 |
pins = "gpio28", |
| 946 |
"gpio29"; |
| 947 |
function = "alt5"; |
| 948 |
}; |
| 949 |
}; |
| 950 |
rgmii_mdio_gpio37: rgmii-mdio-gpio37 { |
| 951 |
pins-mdio { |
| 952 |
pins = "gpio37", |
| 953 |
"gpio38"; |
| 954 |
function = "alt4"; |
| 955 |
}; |
| 956 |
}; |
| 957 |
|
| 958 |
spi0_gpio46: spi0-gpio46 { |
| 959 |
pins-spi { |
| 960 |
pins = "gpio46", |
| 961 |
"gpio47", |
| 962 |
"gpio48", |
| 963 |
"gpio49"; |
| 964 |
function = "alt2"; |
| 965 |
}; |
| 966 |
}; |
| 967 |
spi2_gpio46: spi2-gpio46 { |
| 968 |
pins-spi { |
| 969 |
pins = "gpio46", |
| 970 |
"gpio47", |
| 971 |
"gpio48", |
| 972 |
"gpio49", |
| 973 |
"gpio50"; |
| 974 |
function = "alt5"; |
| 975 |
}; |
| 976 |
}; |
| 977 |
spi3_gpio0: spi3-gpio0 { |
| 978 |
pins-spi { |
| 979 |
pins = "gpio0", |
| 980 |
"gpio1", |
| 981 |
"gpio2", |
| 982 |
"gpio3"; |
| 983 |
function = "alt3"; |
| 984 |
}; |
| 985 |
}; |
| 986 |
spi4_gpio4: spi4-gpio4 { |
| 987 |
pins-spi { |
| 988 |
pins = "gpio4", |
| 989 |
"gpio5", |
| 990 |
"gpio6", |
| 991 |
"gpio7"; |
| 992 |
function = "alt3"; |
| 993 |
}; |
| 994 |
}; |
| 995 |
spi5_gpio12: spi5-gpio12 { |
| 996 |
pins-spi { |
| 997 |
pins = "gpio12", |
| 998 |
"gpio13", |
| 999 |
"gpio14", |
| 1000 |
"gpio15"; |
| 1001 |
function = "alt3"; |
| 1002 |
}; |
| 1003 |
}; |
| 1004 |
spi6_gpio18: spi6-gpio18 { |
| 1005 |
pins-spi { |
| 1006 |
pins = "gpio18", |
| 1007 |
"gpio19", |
| 1008 |
"gpio20", |
| 1009 |
"gpio21"; |
| 1010 |
function = "alt3"; |
| 1011 |
}; |
| 1012 |
}; |
| 1013 |
|
| 1014 |
uart2_gpio0: uart2-gpio0 { |
| 1015 |
pin-tx { |
| 1016 |
pins = "gpio0"; |
| 1017 |
function = "alt4"; |
| 1018 |
bias-disable; |
| 1019 |
}; |
| 1020 |
pin-rx { |
| 1021 |
pins = "gpio1"; |
| 1022 |
function = "alt4"; |
| 1023 |
bias-pull-up; |
| 1024 |
}; |
| 1025 |
}; |
| 1026 |
uart2_ctsrts_gpio2: uart2-ctsrts-gpio2 { |
| 1027 |
pin-cts { |
| 1028 |
pins = "gpio2"; |
| 1029 |
function = "alt4"; |
| 1030 |
bias-pull-up; |
| 1031 |
}; |
| 1032 |
pin-rts { |
| 1033 |
pins = "gpio3"; |
| 1034 |
function = "alt4"; |
| 1035 |
bias-disable; |
| 1036 |
}; |
| 1037 |
}; |
| 1038 |
uart3_gpio4: uart3-gpio4 { |
| 1039 |
pin-tx { |
| 1040 |
pins = "gpio4"; |
| 1041 |
function = "alt4"; |
| 1042 |
bias-disable; |
| 1043 |
}; |
| 1044 |
pin-rx { |
| 1045 |
pins = "gpio5"; |
| 1046 |
function = "alt4"; |
| 1047 |
bias-pull-up; |
| 1048 |
}; |
| 1049 |
}; |
| 1050 |
uart3_ctsrts_gpio6: uart3-ctsrts-gpio6 { |
| 1051 |
pin-cts { |
| 1052 |
pins = "gpio6"; |
| 1053 |
function = "alt4"; |
| 1054 |
bias-pull-up; |
| 1055 |
}; |
| 1056 |
pin-rts { |
| 1057 |
pins = "gpio7"; |
| 1058 |
function = "alt4"; |
| 1059 |
bias-disable; |
| 1060 |
}; |
| 1061 |
}; |
| 1062 |
uart4_gpio8: uart4-gpio8 { |
| 1063 |
pin-tx { |
| 1064 |
pins = "gpio8"; |
| 1065 |
function = "alt4"; |
| 1066 |
bias-disable; |
| 1067 |
}; |
| 1068 |
pin-rx { |
| 1069 |
pins = "gpio9"; |
| 1070 |
function = "alt4"; |
| 1071 |
bias-pull-up; |
| 1072 |
}; |
| 1073 |
}; |
| 1074 |
uart4_ctsrts_gpio10: uart4-ctsrts-gpio10 { |
| 1075 |
pin-cts { |
| 1076 |
pins = "gpio10"; |
| 1077 |
function = "alt4"; |
| 1078 |
bias-pull-up; |
| 1079 |
}; |
| 1080 |
pin-rts { |
| 1081 |
pins = "gpio11"; |
| 1082 |
function = "alt4"; |
| 1083 |
bias-disable; |
| 1084 |
}; |
| 1085 |
}; |
| 1086 |
uart5_gpio12: uart5-gpio12 { |
| 1087 |
pin-tx { |
| 1088 |
pins = "gpio12"; |
| 1089 |
function = "alt4"; |
| 1090 |
bias-disable; |
| 1091 |
}; |
| 1092 |
pin-rx { |
| 1093 |
pins = "gpio13"; |
| 1094 |
function = "alt4"; |
| 1095 |
bias-pull-up; |
| 1096 |
}; |
| 1097 |
}; |
| 1098 |
uart5_ctsrts_gpio14: uart5-ctsrts-gpio14 { |
| 1099 |
pin-cts { |
| 1100 |
pins = "gpio14"; |
| 1101 |
function = "alt4"; |
| 1102 |
bias-pull-up; |
| 1103 |
}; |
| 1104 |
pin-rts { |
| 1105 |
pins = "gpio15"; |
| 1106 |
function = "alt4"; |
| 1107 |
bias-disable; |
| 1108 |
}; |
| 1109 |
}; |
| 1110 |
}; |
| 1111 |
|
| 1112 |
&rmem { |
| 1113 |
#address-cells = <2>; |
| 1114 |
}; |
| 1115 |
|
| 1116 |
&csi0 { |
| 1117 |
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; |
| 1118 |
}; |
| 1119 |
|
| 1120 |
&csi1 { |
| 1121 |
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; |
| 1122 |
}; |
| 1123 |
|
| 1124 |
&cma { |
| 1125 |
/* |
| 1126 |
* arm64 reserves the CMA by default somewhere in ZONE_DMA32, |
| 1127 |
* that's not good enough for the BCM2711 as some devices can |
| 1128 |
* only address the lower 1G of memory (ZONE_DMA). |
| 1129 |
*/ |
| 1130 |
alloc-ranges = <0x0 0x00000000 0x40000000>; |
| 1131 |
}; |
| 1132 |
|
| 1133 |
&i2c0 { |
| 1134 |
compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; |
| 1135 |
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; |
| 1136 |
}; |
| 1137 |
|
| 1138 |
&i2c1 { |
| 1139 |
compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; |
| 1140 |
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; |
| 1141 |
}; |
| 1142 |
|
| 1143 |
&mailbox { |
| 1144 |
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| 1145 |
}; |
| 1146 |
|
| 1147 |
&sdhci { |
| 1148 |
interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; |
| 1149 |
}; |
| 1150 |
|
| 1151 |
&sdhost { |
| 1152 |
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; |
| 1153 |
}; |
| 1154 |
|
| 1155 |
&spi { |
| 1156 |
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; |
| 1157 |
}; |
| 1158 |
|
| 1159 |
&spi1 { |
| 1160 |
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; |
| 1161 |
}; |
| 1162 |
|
| 1163 |
&spi2 { |
| 1164 |
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; |
| 1165 |
}; |
| 1166 |
|
| 1167 |
&system_timer { |
| 1168 |
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, |
| 1169 |
<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, |
| 1170 |
<GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, |
| 1171 |
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; |
| 1172 |
}; |
| 1173 |
|
| 1174 |
&txp { |
| 1175 |
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| 1176 |
}; |
| 1177 |
|
| 1178 |
&uart0 { |
| 1179 |
arm,primecell-periphid = <0x00341011>; |
| 1180 |
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; |
| 1181 |
}; |
| 1182 |
|
| 1183 |
&uart1 { |
| 1184 |
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; |
| 1185 |
}; |
| 1186 |
|
| 1187 |
&usb { |
| 1188 |
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| 1189 |
}; |
| 1190 |
|
| 1191 |
&vec { |
| 1192 |
compatible = "brcm,bcm2711-vec"; |
| 1193 |
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; |
| 1194 |
}; |