| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
#include "bcm283x.dtsi" |
| 3 |
#include "bcm2835-common.dtsi" |
| 4 |
|
| 5 |
/ { |
| 6 |
compatible = "brcm,bcm2835"; |
| 7 |
|
| 8 |
cpus { |
| 9 |
#address-cells = <1>; |
| 10 |
#size-cells = <0>; |
| 11 |
|
| 12 |
cpu@0 { |
| 13 |
device_type = "cpu"; |
| 14 |
compatible = "arm,arm1176jzf-s"; |
| 15 |
reg = <0x0>; |
| 16 |
/* Source for d/i-cache-line-size and d/i-cache-sets |
| 17 |
* https://developer.arm.com/documentation/ddi0301 |
| 18 |
* /h/level-one-memory-system/cache-organization?lang=en |
| 19 |
* |
| 20 |
* Source for d/i-cache-size |
| 21 |
* https://forums.raspberrypi.com/viewtopic.php?t=98428 |
| 22 |
* |
| 23 |
* NOTE: The BCM2835 has a L2 cache but it is dedicated to the GPU |
| 24 |
* It can be shared with the CPU through fw settings, |
| 25 |
* but this is not recommended. |
| 26 |
*/ |
| 27 |
d-cache-size = <0x4000>; |
| 28 |
d-cache-line-size = <16>; |
| 29 |
d-cache-sets = <256>; // 16KiB(size)/16(line-size)=1024ways/4-way set |
| 30 |
i-cache-size = <0x4000>; |
| 31 |
i-cache-line-size = <16>; |
| 32 |
i-cache-sets = <256>; // 16KiB(size)/16(line-size)=1024ways/4-way set |
| 33 |
}; |
| 34 |
}; |
| 35 |
|
| 36 |
soc { |
| 37 |
ranges = <0x7e000000 0x20000000 0x02000000>; |
| 38 |
dma-ranges = <0x40000000 0x00000000 0x20000000>; |
| 39 |
}; |
| 40 |
|
| 41 |
arm-pmu { |
| 42 |
compatible = "arm,arm1176-pmu"; |
| 43 |
}; |
| 44 |
}; |
| 45 |
|
| 46 |
&cpu_thermal { |
| 47 |
coefficients = <(-538) 407000>; |
| 48 |
}; |
| 49 |
|
| 50 |
/* enable thermal sensor with the correct compatible property set */ |
| 51 |
&thermal { |
| 52 |
compatible = "brcm,bcm2835-thermal"; |
| 53 |
status = "okay"; |
| 54 |
}; |