Debian Codegraph @

arch/arm/boot/dts/broadcom/bcm63148.dtsi

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Copyright 2022 Broadcom Ltd.
4 */
5
6 #include <dt-bindings/interrupt-controller/arm-gic.h>
7 #include <dt-bindings/interrupt-controller/irq.h>
8
9 / {
10 compatible = "brcm,bcm63148", "brcm,bcmbca";
11 #address-cells = <1>;
12 #size-cells = <1>;
13
14 interrupt-parent = <&gic>;
15
16 cpus {
17 #address-cells = <1>;
18 #size-cells = <0>;
19
20 B15_0: cpu@0 {
21 device_type = "cpu";
22 compatible = "brcm,brahma-b15";
23 reg = <0x0>;
24 next-level-cache = <&L2_0>;
25 enable-method = "psci";
26 };
27
28 B15_1: cpu@1 {
29 device_type = "cpu";
30 compatible = "brcm,brahma-b15";
31 reg = <0x1>;
32 next-level-cache = <&L2_0>;
33 enable-method = "psci";
34 };
35
36 L2_0: l2-cache0 {
37 compatible = "cache";
38 cache-level = <2>;
39 cache-unified;
40 };
41 };
42
43 timer {
44 compatible = "arm,armv7-timer";
45 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
46 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
47 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
48 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
49 };
50
51 pmu: pmu {
52 compatible = "arm,cortex-a15-pmu";
53 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
54 <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
55 interrupt-affinity = <&B15_0>, <&B15_1>;
56 };
57
58 clocks: clocks {
59 periph_clk: periph-clk {
60 compatible = "fixed-clock";
61 #clock-cells = <0>;
62 clock-frequency = <50000000>;
63 };
64
65 hsspi_pll: hsspi-pll {
66 compatible = "fixed-clock";
67 #clock-cells = <0>;
68 clock-frequency = <400000000>;
69 };
70 };
71
72 psci {
73 compatible = "arm,psci-0.2";
74 method = "smc";
75 };
76
77 axi@80030000 {
78 compatible = "simple-bus";
79 #address-cells = <1>;
80 #size-cells = <1>;
81 ranges = <0 0x80030000 0x8000>;
82
83 gic: interrupt-controller@1000 {
84 compatible = "arm,cortex-a15-gic";
85 #interrupt-cells = <3>;
86 interrupt-controller;
87 reg = <0x1000 0x1000>,
88 <0x2000 0x2000>,
89 <0x4000 0x2000>,
90 <0x6000 0x2000>;
91 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
92 IRQ_TYPE_LEVEL_HIGH)>;
93 };
94 };
95
96 bus@ff800000 {
97 compatible = "simple-bus";
98 #address-cells = <1>;
99 #size-cells = <1>;
100 ranges = <0 0xfffe8000 0x8000>;
101
102 /* GPIOs 0 .. 31 */
103 gpio0: gpio@100 {
104 compatible = "brcm,bcm6345-gpio";
105 reg = <0x100 0x04>, <0x114 0x04>;
106 reg-names = "dirout", "dat";
107 gpio-controller;
108 #gpio-cells = <2>;
109 status = "disabled";
110 };
111
112 /* GPIOs 32 .. 63 */
113 gpio1: gpio@104 {
114 compatible = "brcm,bcm6345-gpio";
115 reg = <0x104 0x04>, <0x118 0x04>;
116 reg-names = "dirout", "dat";
117 gpio-controller;
118 #gpio-cells = <2>;
119 status = "disabled";
120 };
121
122 /* GPIOs 64 .. 95 */
123 gpio2: gpio@108 {
124 compatible = "brcm,bcm6345-gpio";
125 reg = <0x108 0x04>, <0x11c 0x04>;
126 reg-names = "dirout", "dat";
127 gpio-controller;
128 #gpio-cells = <2>;
129 status = "disabled";
130 };
131
132 /* GPIOs 96 .. 127 */
133 gpio3: gpio@10c {
134 compatible = "brcm,bcm6345-gpio";
135 reg = <0x10c 0x04>, <0x120 0x04>;
136 reg-names = "dirout", "dat";
137 gpio-controller;
138 #gpio-cells = <2>;
139 status = "disabled";
140 };
141
142 /* GPIOs 128 .. 159 */
143 gpio4: gpio@110 {
144 compatible = "brcm,bcm6345-gpio";
145 reg = <0x110 0x04>, <0x124 0x04>;
146 reg-names = "dirout", "dat";
147 gpio-controller;
148 #gpio-cells = <2>;
149 status = "disabled";
150 };
151
152 rng@300 {
153 compatible = "brcm,iproc-rng200";
154 reg = <0x300 0x28>;
155 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
156 };
157
158 uart0: serial@600 {
159 compatible = "brcm,bcm6345-uart";
160 reg = <0x600 0x20>;
161 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
162 clocks = <&periph_clk>;
163 clock-names = "refclk";
164 status = "disabled";
165 };
166
167 leds: led-controller@700 {
168 #address-cells = <1>;
169 #size-cells = <0>;
170 compatible = "brcm,bcm63138-leds";
171 reg = <0x700 0xdc>;
172 status = "disabled";
173 };
174
175 hsspi: spi@1000 {
176 #address-cells = <1>;
177 #size-cells = <0>;
178 compatible = "brcm,bcm63148-hsspi", "brcm,bcmbca-hsspi-v1.0";
179 reg = <0x1000 0x600>;
180 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
181 clocks = <&hsspi_pll &hsspi_pll>;
182 clock-names = "hsspi", "pll";
183 num-cs = <8>;
184 status = "disabled";
185 };
186
187 nand_controller: nand-controller@2000 {
188 #address-cells = <1>;
189 #size-cells = <0>;
190 compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
191 reg = <0x2000 0x600>, <0xf0 0x10>;
192 reg-names = "nand", "nand-int-base";
193 status = "disabled";
194
195 nandcs: nand@0 {
196 compatible = "brcm,nandcs";
197 reg = <0>;
198 };
199 };
200 };
201 };