| 1 |
#include <dt-bindings/pinctrl/bcm2835.h> |
| 2 |
#include <dt-bindings/clock/bcm2835.h> |
| 3 |
#include <dt-bindings/clock/bcm2835-aux.h> |
| 4 |
#include <dt-bindings/gpio/gpio.h> |
| 5 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 6 |
#include <dt-bindings/soc/bcm2835-pm.h> |
| 7 |
|
| 8 |
/* firmware-provided startup stubs live here, where the secondary CPUs are |
| 9 |
* spinning. |
| 10 |
*/ |
| 11 |
/memreserve/ 0x00000000 0x00001000; |
| 12 |
|
| 13 |
/* This include file covers the common peripherals and configuration between |
| 14 |
* bcm2835 and bcm2836 implementations, leaving the CPU configuration to |
| 15 |
* bcm2835.dtsi and bcm2836.dtsi. |
| 16 |
*/ |
| 17 |
|
| 18 |
/ { |
| 19 |
compatible = "brcm,bcm2835"; |
| 20 |
model = "BCM2835"; |
| 21 |
#address-cells = <1>; |
| 22 |
#size-cells = <1>; |
| 23 |
|
| 24 |
aliases { |
| 25 |
serial0 = &uart0; |
| 26 |
serial1 = &uart1; |
| 27 |
}; |
| 28 |
|
| 29 |
chosen { |
| 30 |
stdout-path = "serial0:115200n8"; |
| 31 |
}; |
| 32 |
|
| 33 |
rmem: reserved-memory { |
| 34 |
#address-cells = <1>; |
| 35 |
#size-cells = <1>; |
| 36 |
ranges; |
| 37 |
|
| 38 |
cma: linux,cma { |
| 39 |
compatible = "shared-dma-pool"; |
| 40 |
size = <0x4000000>; /* 64MB */ |
| 41 |
reusable; |
| 42 |
linux,cma-default; |
| 43 |
}; |
| 44 |
}; |
| 45 |
|
| 46 |
thermal-zones { |
| 47 |
cpu_thermal: cpu-thermal { |
| 48 |
polling-delay-passive = <0>; |
| 49 |
polling-delay = <1000>; |
| 50 |
|
| 51 |
trips { |
| 52 |
cpu-crit { |
| 53 |
temperature = <90000>; |
| 54 |
hysteresis = <0>; |
| 55 |
type = "critical"; |
| 56 |
}; |
| 57 |
}; |
| 58 |
|
| 59 |
cooling-maps { |
| 60 |
}; |
| 61 |
}; |
| 62 |
}; |
| 63 |
|
| 64 |
soc { |
| 65 |
compatible = "simple-bus"; |
| 66 |
#address-cells = <1>; |
| 67 |
#size-cells = <1>; |
| 68 |
|
| 69 |
system_timer: timer@7e003000 { |
| 70 |
compatible = "brcm,bcm2835-system-timer"; |
| 71 |
reg = <0x7e003000 0x1000>; |
| 72 |
interrupts = <1 0>, <1 1>, <1 2>, <1 3>; |
| 73 |
/* This could be a reference to BCM2835_CLOCK_TIMER, |
| 74 |
* but we don't have the driver using the common clock |
| 75 |
* support yet. |
| 76 |
*/ |
| 77 |
clock-frequency = <1000000>; |
| 78 |
}; |
| 79 |
|
| 80 |
txp: txp@7e004000 { |
| 81 |
compatible = "brcm,bcm2835-txp"; |
| 82 |
reg = <0x7e004000 0x20>; |
| 83 |
interrupts = <1 11>; |
| 84 |
}; |
| 85 |
|
| 86 |
clocks: cprman@7e101000 { |
| 87 |
compatible = "brcm,bcm2835-cprman"; |
| 88 |
#clock-cells = <1>; |
| 89 |
reg = <0x7e101000 0x2000>; |
| 90 |
|
| 91 |
/* CPRMAN derives almost everything from the |
| 92 |
* platform's oscillator. However, the DSI |
| 93 |
* pixel clocks come from the DSI analog PHY. |
| 94 |
*/ |
| 95 |
clocks = <&clk_osc>, |
| 96 |
<&dsi0 0>, <&dsi0 1>, <&dsi0 2>, |
| 97 |
<&dsi1 0>, <&dsi1 1>, <&dsi1 2>; |
| 98 |
}; |
| 99 |
|
| 100 |
mailbox: mailbox@7e00b880 { |
| 101 |
compatible = "brcm,bcm2835-mbox"; |
| 102 |
reg = <0x7e00b880 0x40>; |
| 103 |
interrupts = <0 1>; |
| 104 |
#mbox-cells = <0>; |
| 105 |
}; |
| 106 |
|
| 107 |
gpio: gpio@7e200000 { |
| 108 |
compatible = "brcm,bcm2835-gpio"; |
| 109 |
reg = <0x7e200000 0xb4>; |
| 110 |
/* |
| 111 |
* The GPIO IP block is designed for 3 banks of GPIOs. |
| 112 |
* Each bank has a GPIO interrupt for itself. |
| 113 |
* There is an overall "any bank" interrupt. |
| 114 |
* In order, these are GIC interrupts 17, 18, 19, 20. |
| 115 |
* Since the BCM2835 only has 2 banks, the 2nd bank |
| 116 |
* interrupt output appears to be mirrored onto the |
| 117 |
* 3rd bank's interrupt signal. |
| 118 |
* So, a bank0 interrupt shows up on 17, 20, and |
| 119 |
* a bank1 interrupt shows up on 18, 19, 20! |
| 120 |
*/ |
| 121 |
interrupts = <2 17>, <2 18>, <2 19>, <2 20>; |
| 122 |
|
| 123 |
gpio-controller; |
| 124 |
#gpio-cells = <2>; |
| 125 |
|
| 126 |
interrupt-controller; |
| 127 |
#interrupt-cells = <2>; |
| 128 |
|
| 129 |
gpio-ranges = <&gpio 0 0 54>; |
| 130 |
|
| 131 |
/* Defines common pin muxing groups |
| 132 |
* |
| 133 |
* While each pin can have its mux selected |
| 134 |
* for various functions individually, some |
| 135 |
* groups only make sense to switch to a |
| 136 |
* particular function together. |
| 137 |
*/ |
| 138 |
dpi_gpio0: dpi-gpio0 { |
| 139 |
brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 |
| 140 |
12 13 14 15 16 17 18 19 |
| 141 |
20 21 22 23 24 25 26 27>; |
| 142 |
brcm,function = <BCM2835_FSEL_ALT2>; |
| 143 |
}; |
| 144 |
emmc_gpio22: emmc-gpio22 { |
| 145 |
brcm,pins = <22 23 24 25 26 27>; |
| 146 |
brcm,function = <BCM2835_FSEL_ALT3>; |
| 147 |
}; |
| 148 |
emmc_gpio34: emmc-gpio34 { |
| 149 |
brcm,pins = <34 35 36 37 38 39>; |
| 150 |
brcm,function = <BCM2835_FSEL_ALT3>; |
| 151 |
brcm,pull = <BCM2835_PUD_OFF |
| 152 |
BCM2835_PUD_UP |
| 153 |
BCM2835_PUD_UP |
| 154 |
BCM2835_PUD_UP |
| 155 |
BCM2835_PUD_UP |
| 156 |
BCM2835_PUD_UP>; |
| 157 |
}; |
| 158 |
emmc_gpio48: emmc-gpio48 { |
| 159 |
brcm,pins = <48 49 50 51 52 53>; |
| 160 |
brcm,function = <BCM2835_FSEL_ALT3>; |
| 161 |
}; |
| 162 |
|
| 163 |
gpclk0_gpio4: gpclk0-gpio4 { |
| 164 |
brcm,pins = <4>; |
| 165 |
brcm,function = <BCM2835_FSEL_ALT0>; |
| 166 |
}; |
| 167 |
gpclk1_gpio5: gpclk1-gpio5 { |
| 168 |
brcm,pins = <5>; |
| 169 |
brcm,function = <BCM2835_FSEL_ALT0>; |
| 170 |
}; |
| 171 |
gpclk1_gpio42: gpclk1-gpio42 { |
| 172 |
brcm,pins = <42>; |
| 173 |
brcm,function = <BCM2835_FSEL_ALT0>; |
| 174 |
}; |
| 175 |
gpclk1_gpio44: gpclk1-gpio44 { |
| 176 |
brcm,pins = <44>; |
| 177 |
brcm,function = <BCM2835_FSEL_ALT0>; |
| 178 |
}; |
| 179 |
gpclk2_gpio6: gpclk2-gpio6 { |
| 180 |
brcm,pins = <6>; |
| 181 |
brcm,function = <BCM2835_FSEL_ALT0>; |
| 182 |
}; |
| 183 |
gpclk2_gpio43: gpclk2-gpio43 { |
| 184 |
brcm,pins = <43>; |
| 185 |
brcm,function = <BCM2835_FSEL_ALT0>; |
| 186 |
brcm,pull = <BCM2835_PUD_OFF>; |
| 187 |
}; |
| 188 |
|
| 189 |
i2c0_gpio0: i2c0-gpio0 { |
| 190 |
brcm,pins = <0 1>; |
| 191 |
brcm,function = <BCM2835_FSEL_ALT0>; |
| 192 |
}; |
| 193 |
i2c0_gpio28: i2c0-gpio28 { |
| 194 |
brcm,pins = <28 29>; |
| 195 |
brcm,function = <BCM2835_FSEL_ALT0>; |
| 196 |
}; |
| 197 |
i2c0_gpio44: i2c0-gpio44 { |
| 198 |
brcm,pins = <44 45>; |
| 199 |
brcm,function = <BCM2835_FSEL_ALT1>; |
| 200 |
}; |
| 201 |
i2c1_gpio2: i2c1-gpio2 { |
| 202 |
brcm,pins = <2 3>; |
| 203 |
brcm,function = <BCM2835_FSEL_ALT0>; |
| 204 |
}; |
| 205 |
i2c1_gpio44: i2c1-gpio44 { |
| 206 |
brcm,pins = <44 45>; |
| 207 |
brcm,function = <BCM2835_FSEL_ALT2>; |
| 208 |
}; |
| 209 |
|
| 210 |
jtag_gpio22: jtag-gpio22 { |
| 211 |
brcm,pins = <22 23 24 25 26 27>; |
| 212 |
brcm,function = <BCM2835_FSEL_ALT4>; |
| 213 |
}; |
| 214 |
|
| 215 |
pcm_gpio18: pcm-gpio18 { |
| 216 |
brcm,pins = <18 19 20 21>; |
| 217 |
brcm,function = <BCM2835_FSEL_ALT0>; |
| 218 |
}; |
| 219 |
pcm_gpio28: pcm-gpio28 { |
| 220 |
brcm,pins = <28 29 30 31>; |
| 221 |
brcm,function = <BCM2835_FSEL_ALT2>; |
| 222 |
}; |
| 223 |
|
| 224 |
sdhost_gpio48: sdhost-gpio48 { |
| 225 |
brcm,pins = <48 49 50 51 52 53>; |
| 226 |
brcm,function = <BCM2835_FSEL_ALT0>; |
| 227 |
}; |
| 228 |
|
| 229 |
spi0_gpio7: spi0-gpio7 { |
| 230 |
brcm,pins = <7 8 9 10 11>; |
| 231 |
brcm,function = <BCM2835_FSEL_ALT0>; |
| 232 |
}; |
| 233 |
spi0_gpio35: spi0-gpio35 { |
| 234 |
brcm,pins = <35 36 37 38 39>; |
| 235 |
brcm,function = <BCM2835_FSEL_ALT0>; |
| 236 |
}; |
| 237 |
spi1_gpio16: spi1-gpio16 { |
| 238 |
brcm,pins = <16 17 18 19 20 21>; |
| 239 |
brcm,function = <BCM2835_FSEL_ALT4>; |
| 240 |
}; |
| 241 |
spi2_gpio40: spi2-gpio40 { |
| 242 |
brcm,pins = <40 41 42 43 44 45>; |
| 243 |
brcm,function = <BCM2835_FSEL_ALT4>; |
| 244 |
}; |
| 245 |
|
| 246 |
uart0_gpio14: uart0-gpio14 { |
| 247 |
brcm,pins = <14 15>; |
| 248 |
brcm,function = <BCM2835_FSEL_ALT0>; |
| 249 |
}; |
| 250 |
/* Separate from the uart0_gpio14 group |
| 251 |
* because it conflicts with spi1_gpio16, and |
| 252 |
* people often run uart0 on the two pins |
| 253 |
* without flow control. |
| 254 |
*/ |
| 255 |
uart0_ctsrts_gpio16: uart0-ctsrts-gpio16 { |
| 256 |
brcm,pins = <16 17>; |
| 257 |
brcm,function = <BCM2835_FSEL_ALT3>; |
| 258 |
}; |
| 259 |
uart0_ctsrts_gpio30: uart0-ctsrts-gpio30 { |
| 260 |
brcm,pins = <30 31>; |
| 261 |
brcm,function = <BCM2835_FSEL_ALT3>; |
| 262 |
brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>; |
| 263 |
}; |
| 264 |
uart0_gpio32: uart0-gpio32 { |
| 265 |
brcm,pins = <32 33>; |
| 266 |
brcm,function = <BCM2835_FSEL_ALT3>; |
| 267 |
brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>; |
| 268 |
}; |
| 269 |
uart0_gpio36: uart0-gpio36 { |
| 270 |
brcm,pins = <36 37>; |
| 271 |
brcm,function = <BCM2835_FSEL_ALT2>; |
| 272 |
}; |
| 273 |
uart0_ctsrts_gpio38: uart0-ctsrts-gpio38 { |
| 274 |
brcm,pins = <38 39>; |
| 275 |
brcm,function = <BCM2835_FSEL_ALT2>; |
| 276 |
}; |
| 277 |
|
| 278 |
uart1_gpio14: uart1-gpio14 { |
| 279 |
brcm,pins = <14 15>; |
| 280 |
brcm,function = <BCM2835_FSEL_ALT5>; |
| 281 |
}; |
| 282 |
uart1_ctsrts_gpio16: uart1-ctsrts-gpio16 { |
| 283 |
brcm,pins = <16 17>; |
| 284 |
brcm,function = <BCM2835_FSEL_ALT5>; |
| 285 |
}; |
| 286 |
uart1_gpio32: uart1-gpio32 { |
| 287 |
brcm,pins = <32 33>; |
| 288 |
brcm,function = <BCM2835_FSEL_ALT5>; |
| 289 |
}; |
| 290 |
uart1_ctsrts_gpio30: uart1-ctsrts-gpio30 { |
| 291 |
brcm,pins = <30 31>; |
| 292 |
brcm,function = <BCM2835_FSEL_ALT5>; |
| 293 |
}; |
| 294 |
uart1_gpio40: uart1-gpio40 { |
| 295 |
brcm,pins = <40 41>; |
| 296 |
brcm,function = <BCM2835_FSEL_ALT5>; |
| 297 |
}; |
| 298 |
uart1_ctsrts_gpio42: uart1-ctsrts-gpio42 { |
| 299 |
brcm,pins = <42 43>; |
| 300 |
brcm,function = <BCM2835_FSEL_ALT5>; |
| 301 |
}; |
| 302 |
}; |
| 303 |
|
| 304 |
uart0: serial@7e201000 { |
| 305 |
compatible = "arm,pl011", "arm,primecell"; |
| 306 |
reg = <0x7e201000 0x200>; |
| 307 |
interrupts = <2 25>; |
| 308 |
clocks = <&clocks BCM2835_CLOCK_UART>, |
| 309 |
<&clocks BCM2835_CLOCK_VPU>; |
| 310 |
clock-names = "uartclk", "apb_pclk"; |
| 311 |
arm,primecell-periphid = <0x00241011>; |
| 312 |
}; |
| 313 |
|
| 314 |
sdhost: mmc@7e202000 { |
| 315 |
compatible = "brcm,bcm2835-sdhost"; |
| 316 |
reg = <0x7e202000 0x100>; |
| 317 |
interrupts = <2 24>; |
| 318 |
clocks = <&clocks BCM2835_CLOCK_VPU>; |
| 319 |
status = "disabled"; |
| 320 |
}; |
| 321 |
|
| 322 |
i2s: i2s@7e203000 { |
| 323 |
compatible = "brcm,bcm2835-i2s"; |
| 324 |
reg = <0x7e203000 0x24>; |
| 325 |
clocks = <&clocks BCM2835_CLOCK_PCM>; |
| 326 |
status = "disabled"; |
| 327 |
}; |
| 328 |
|
| 329 |
spi: spi@7e204000 { |
| 330 |
compatible = "brcm,bcm2835-spi"; |
| 331 |
reg = <0x7e204000 0x200>; |
| 332 |
interrupts = <2 22>; |
| 333 |
clocks = <&clocks BCM2835_CLOCK_VPU>; |
| 334 |
#address-cells = <1>; |
| 335 |
#size-cells = <0>; |
| 336 |
status = "disabled"; |
| 337 |
}; |
| 338 |
|
| 339 |
i2c0: i2c@7e205000 { |
| 340 |
compatible = "brcm,bcm2835-i2c"; |
| 341 |
reg = <0x7e205000 0x200>; |
| 342 |
interrupts = <2 21>; |
| 343 |
clocks = <&clocks BCM2835_CLOCK_VPU>; |
| 344 |
#address-cells = <1>; |
| 345 |
#size-cells = <0>; |
| 346 |
status = "disabled"; |
| 347 |
}; |
| 348 |
|
| 349 |
dpi: dpi@7e208000 { |
| 350 |
compatible = "brcm,bcm2835-dpi"; |
| 351 |
reg = <0x7e208000 0x8c>; |
| 352 |
clocks = <&clocks BCM2835_CLOCK_VPU>, |
| 353 |
<&clocks BCM2835_CLOCK_DPI>; |
| 354 |
clock-names = "core", "pixel"; |
| 355 |
status = "disabled"; |
| 356 |
}; |
| 357 |
|
| 358 |
dsi0: dsi@7e209000 { |
| 359 |
compatible = "brcm,bcm2835-dsi0"; |
| 360 |
reg = <0x7e209000 0x78>; |
| 361 |
interrupts = <2 4>; |
| 362 |
#address-cells = <1>; |
| 363 |
#size-cells = <0>; |
| 364 |
#clock-cells = <1>; |
| 365 |
|
| 366 |
clocks = <&clocks BCM2835_PLLA_DSI0>, |
| 367 |
<&clocks BCM2835_CLOCK_DSI0E>, |
| 368 |
<&clocks BCM2835_CLOCK_DSI0P>; |
| 369 |
clock-names = "phy", "escape", "pixel"; |
| 370 |
|
| 371 |
clock-output-names = "dsi0_byte", |
| 372 |
"dsi0_ddr2", |
| 373 |
"dsi0_ddr"; |
| 374 |
|
| 375 |
status = "disabled"; |
| 376 |
}; |
| 377 |
|
| 378 |
aux: aux@7e215000 { |
| 379 |
compatible = "brcm,bcm2835-aux"; |
| 380 |
#clock-cells = <1>; |
| 381 |
reg = <0x7e215000 0x8>; |
| 382 |
clocks = <&clocks BCM2835_CLOCK_VPU>; |
| 383 |
}; |
| 384 |
|
| 385 |
uart1: serial@7e215040 { |
| 386 |
compatible = "brcm,bcm2835-aux-uart"; |
| 387 |
reg = <0x7e215040 0x40>; |
| 388 |
interrupts = <1 29>; |
| 389 |
clocks = <&aux BCM2835_AUX_CLOCK_UART>; |
| 390 |
status = "disabled"; |
| 391 |
}; |
| 392 |
|
| 393 |
spi1: spi@7e215080 { |
| 394 |
compatible = "brcm,bcm2835-aux-spi"; |
| 395 |
reg = <0x7e215080 0x40>; |
| 396 |
interrupts = <1 29>; |
| 397 |
clocks = <&aux BCM2835_AUX_CLOCK_SPI1>; |
| 398 |
#address-cells = <1>; |
| 399 |
#size-cells = <0>; |
| 400 |
status = "disabled"; |
| 401 |
}; |
| 402 |
|
| 403 |
spi2: spi@7e2150c0 { |
| 404 |
compatible = "brcm,bcm2835-aux-spi"; |
| 405 |
reg = <0x7e2150c0 0x40>; |
| 406 |
interrupts = <1 29>; |
| 407 |
clocks = <&aux BCM2835_AUX_CLOCK_SPI2>; |
| 408 |
#address-cells = <1>; |
| 409 |
#size-cells = <0>; |
| 410 |
status = "disabled"; |
| 411 |
}; |
| 412 |
|
| 413 |
pwm: pwm@7e20c000 { |
| 414 |
compatible = "brcm,bcm2835-pwm"; |
| 415 |
reg = <0x7e20c000 0x28>; |
| 416 |
clocks = <&clocks BCM2835_CLOCK_PWM>; |
| 417 |
assigned-clocks = <&clocks BCM2835_CLOCK_PWM>; |
| 418 |
assigned-clock-rates = <10000000>; |
| 419 |
#pwm-cells = <3>; |
| 420 |
status = "disabled"; |
| 421 |
}; |
| 422 |
|
| 423 |
sdhci: mmc@7e300000 { |
| 424 |
compatible = "brcm,bcm2835-sdhci"; |
| 425 |
reg = <0x7e300000 0x100>; |
| 426 |
interrupts = <2 30>; |
| 427 |
clocks = <&clocks BCM2835_CLOCK_EMMC>; |
| 428 |
status = "disabled"; |
| 429 |
}; |
| 430 |
|
| 431 |
hvs@7e400000 { |
| 432 |
compatible = "brcm,bcm2835-hvs"; |
| 433 |
reg = <0x7e400000 0x6000>; |
| 434 |
interrupts = <2 1>; |
| 435 |
}; |
| 436 |
|
| 437 |
dsi1: dsi@7e700000 { |
| 438 |
compatible = "brcm,bcm2835-dsi1"; |
| 439 |
reg = <0x7e700000 0x8c>; |
| 440 |
interrupts = <2 12>; |
| 441 |
#address-cells = <1>; |
| 442 |
#size-cells = <0>; |
| 443 |
#clock-cells = <1>; |
| 444 |
|
| 445 |
clocks = <&clocks BCM2835_PLLD_DSI1>, |
| 446 |
<&clocks BCM2835_CLOCK_DSI1E>, |
| 447 |
<&clocks BCM2835_CLOCK_DSI1P>; |
| 448 |
clock-names = "phy", "escape", "pixel"; |
| 449 |
|
| 450 |
clock-output-names = "dsi1_byte", |
| 451 |
"dsi1_ddr2", |
| 452 |
"dsi1_ddr"; |
| 453 |
|
| 454 |
status = "disabled"; |
| 455 |
}; |
| 456 |
|
| 457 |
csi0: csi@7e800000 { |
| 458 |
compatible = "brcm,bcm2835-unicam"; |
| 459 |
reg = <0x7e800000 0x800>, |
| 460 |
<0x7e802000 0x4>; |
| 461 |
reg-names = "unicam", "cmi"; |
| 462 |
interrupts = <2 6>; |
| 463 |
brcm,num-data-lanes = <2>; |
| 464 |
status = "disabled"; |
| 465 |
port { |
| 466 |
}; |
| 467 |
}; |
| 468 |
|
| 469 |
csi1: csi@7e801000 { |
| 470 |
compatible = "brcm,bcm2835-unicam"; |
| 471 |
reg = <0x7e801000 0x800>, |
| 472 |
<0x7e802004 0x4>; |
| 473 |
reg-names = "unicam", "cmi"; |
| 474 |
interrupts = <2 7>; |
| 475 |
brcm,num-data-lanes = <4>; |
| 476 |
status = "disabled"; |
| 477 |
port { |
| 478 |
}; |
| 479 |
}; |
| 480 |
|
| 481 |
i2c1: i2c@7e804000 { |
| 482 |
compatible = "brcm,bcm2835-i2c"; |
| 483 |
reg = <0x7e804000 0x1000>; |
| 484 |
interrupts = <2 21>; |
| 485 |
clocks = <&clocks BCM2835_CLOCK_VPU>; |
| 486 |
#address-cells = <1>; |
| 487 |
#size-cells = <0>; |
| 488 |
status = "disabled"; |
| 489 |
}; |
| 490 |
|
| 491 |
usb: usb@7e980000 { |
| 492 |
compatible = "brcm,bcm2835-usb"; |
| 493 |
reg = <0x7e980000 0x10000>; |
| 494 |
interrupts = <1 9>; |
| 495 |
#address-cells = <1>; |
| 496 |
#size-cells = <0>; |
| 497 |
clocks = <&clk_usb>; |
| 498 |
clock-names = "otg"; |
| 499 |
phys = <&usbphy>; |
| 500 |
phy-names = "usb2-phy"; |
| 501 |
}; |
| 502 |
}; |
| 503 |
|
| 504 |
clocks { |
| 505 |
/* The oscillator is the root of the clock tree. */ |
| 506 |
clk_osc: clk-osc { |
| 507 |
compatible = "fixed-clock"; |
| 508 |
#clock-cells = <0>; |
| 509 |
clock-output-names = "osc"; |
| 510 |
clock-frequency = <19200000>; |
| 511 |
}; |
| 512 |
|
| 513 |
clk_usb: clk-usb { |
| 514 |
compatible = "fixed-clock"; |
| 515 |
#clock-cells = <0>; |
| 516 |
clock-output-names = "otg"; |
| 517 |
clock-frequency = <480000000>; |
| 518 |
}; |
| 519 |
}; |
| 520 |
|
| 521 |
usbphy: phy { |
| 522 |
compatible = "usb-nop-xceiv"; |
| 523 |
#phy-cells = <0>; |
| 524 |
}; |
| 525 |
}; |