| 1 |
/* |
| 2 |
* BSD LICENSE |
| 3 |
* |
| 4 |
* Copyright(c) 2017 Broadcom. All rights reserved. |
| 5 |
* |
| 6 |
* Redistribution and use in source and binary forms, with or without |
| 7 |
* modification, are permitted provided that the following conditions |
| 8 |
* are met: |
| 9 |
* |
| 10 |
* * Redistributions of source code must retain the above copyright |
| 11 |
* notice, this list of conditions and the following disclaimer. |
| 12 |
* * Redistributions in binary form must reproduce the above copyright |
| 13 |
* notice, this list of conditions and the following disclaimer in |
| 14 |
* the documentation and/or other materials provided with the |
| 15 |
* distribution. |
| 16 |
* * Neither the name of Broadcom Corporation nor the names of its |
| 17 |
* contributors may be used to endorse or promote products derived |
| 18 |
* from this software without specific prior written permission. |
| 19 |
* |
| 20 |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| 21 |
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| 22 |
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| 23 |
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| 24 |
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| 25 |
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| 26 |
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| 27 |
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| 28 |
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| 29 |
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| 30 |
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| 31 |
*/ |
| 32 |
|
| 33 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 34 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 35 |
|
| 36 |
/ { |
| 37 |
compatible = "brcm,hr2"; |
| 38 |
model = "Broadcom Hurricane 2 SoC"; |
| 39 |
interrupt-parent = <&gic>; |
| 40 |
#address-cells = <1>; |
| 41 |
#size-cells = <1>; |
| 42 |
|
| 43 |
cpus { |
| 44 |
#address-cells = <1>; |
| 45 |
#size-cells = <0>; |
| 46 |
|
| 47 |
cpu0: cpu@0 { |
| 48 |
device_type = "cpu"; |
| 49 |
compatible = "arm,cortex-a9"; |
| 50 |
next-level-cache = <&L2>; |
| 51 |
reg = <0x0>; |
| 52 |
}; |
| 53 |
}; |
| 54 |
|
| 55 |
pmu { |
| 56 |
compatible = "arm,cortex-a9-pmu"; |
| 57 |
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| 58 |
<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| 59 |
interrupt-affinity = <&cpu0>; |
| 60 |
}; |
| 61 |
|
| 62 |
mpcore@19000000 { |
| 63 |
compatible = "simple-bus"; |
| 64 |
ranges = <0x00000000 0x19000000 0x00023000>; |
| 65 |
#address-cells = <1>; |
| 66 |
#size-cells = <1>; |
| 67 |
|
| 68 |
a9pll: arm_clk@0 { |
| 69 |
#clock-cells = <0>; |
| 70 |
compatible = "brcm,hr2-armpll"; |
| 71 |
clocks = <&osc>; |
| 72 |
reg = <0x0 0x1000>; |
| 73 |
}; |
| 74 |
|
| 75 |
timer@20200 { |
| 76 |
compatible = "arm,cortex-a9-global-timer"; |
| 77 |
reg = <0x20200 0x100>; |
| 78 |
interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; |
| 79 |
clocks = <&periph_clk>; |
| 80 |
}; |
| 81 |
|
| 82 |
twd-timer@20600 { |
| 83 |
compatible = "arm,cortex-a9-twd-timer"; |
| 84 |
reg = <0x20600 0x20>; |
| 85 |
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | |
| 86 |
IRQ_TYPE_EDGE_RISING)>; |
| 87 |
clocks = <&periph_clk>; |
| 88 |
}; |
| 89 |
|
| 90 |
twd-watchdog@20620 { |
| 91 |
compatible = "arm,cortex-a9-twd-wdt"; |
| 92 |
reg = <0x20620 0x20>; |
| 93 |
interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | |
| 94 |
IRQ_TYPE_EDGE_RISING)>; |
| 95 |
clocks = <&periph_clk>; |
| 96 |
}; |
| 97 |
|
| 98 |
gic: interrupt-controller@21000 { |
| 99 |
compatible = "arm,cortex-a9-gic"; |
| 100 |
#interrupt-cells = <3>; |
| 101 |
#address-cells = <0>; |
| 102 |
interrupt-controller; |
| 103 |
reg = <0x21000 0x1000>, |
| 104 |
<0x20100 0x100>; |
| 105 |
}; |
| 106 |
|
| 107 |
L2: cache-controller@22000 { |
| 108 |
compatible = "arm,pl310-cache"; |
| 109 |
reg = <0x22000 0x1000>; |
| 110 |
cache-unified; |
| 111 |
cache-level = <2>; |
| 112 |
}; |
| 113 |
}; |
| 114 |
|
| 115 |
clocks { |
| 116 |
#address-cells = <1>; |
| 117 |
#size-cells = <1>; |
| 118 |
ranges; |
| 119 |
|
| 120 |
osc: oscillator { |
| 121 |
#clock-cells = <0>; |
| 122 |
compatible = "fixed-clock"; |
| 123 |
clock-frequency = <25000000>; |
| 124 |
}; |
| 125 |
|
| 126 |
periph_clk: periph_clk { |
| 127 |
#clock-cells = <0>; |
| 128 |
compatible = "fixed-factor-clock"; |
| 129 |
clocks = <&a9pll>; |
| 130 |
clock-div = <2>; |
| 131 |
clock-mult = <1>; |
| 132 |
}; |
| 133 |
}; |
| 134 |
|
| 135 |
axi@18000000 { |
| 136 |
compatible = "simple-bus"; |
| 137 |
ranges = <0x00000000 0x18000000 0x0011c40c>; |
| 138 |
#address-cells = <1>; |
| 139 |
#size-cells = <1>; |
| 140 |
|
| 141 |
uart0: serial@300 { |
| 142 |
compatible = "ns16550a"; |
| 143 |
reg = <0x0300 0x100>; |
| 144 |
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; |
| 145 |
clocks = <&osc>; |
| 146 |
status = "disabled"; |
| 147 |
}; |
| 148 |
|
| 149 |
uart1: serial@400 { |
| 150 |
compatible = "ns16550a"; |
| 151 |
reg = <0x0400 0x100>; |
| 152 |
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; |
| 153 |
clocks = <&osc>; |
| 154 |
status = "disabled"; |
| 155 |
}; |
| 156 |
|
| 157 |
dma@20000 { |
| 158 |
compatible = "arm,pl330", "arm,primecell"; |
| 159 |
reg = <0x20000 0x1000>; |
| 160 |
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, |
| 161 |
<GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, |
| 162 |
<GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, |
| 163 |
<GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, |
| 164 |
<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, |
| 165 |
<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, |
| 166 |
<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, |
| 167 |
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, |
| 168 |
<GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; |
| 169 |
#dma-cells = <1>; |
| 170 |
status = "disabled"; |
| 171 |
}; |
| 172 |
|
| 173 |
amac0: ethernet@22000 { |
| 174 |
compatible = "brcm,nsp-amac"; |
| 175 |
reg = <0x22000 0x1000>, |
| 176 |
<0x110000 0x1000>; |
| 177 |
reg-names = "amac_base", "idm_base"; |
| 178 |
interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; |
| 179 |
status = "disabled"; |
| 180 |
}; |
| 181 |
|
| 182 |
nand_controller: nand-controller@26000 { |
| 183 |
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; |
| 184 |
reg = <0x26000 0x600>, |
| 185 |
<0x11b408 0x600>, |
| 186 |
<0x026f00 0x20>; |
| 187 |
reg-names = "nand", "iproc-idm", "iproc-ext"; |
| 188 |
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; |
| 189 |
|
| 190 |
#address-cells = <1>; |
| 191 |
#size-cells = <0>; |
| 192 |
|
| 193 |
brcm,nand-has-wp; |
| 194 |
}; |
| 195 |
|
| 196 |
gpiob: gpio@30000 { |
| 197 |
compatible = "brcm,iproc-hr2-gpio", "brcm,iproc-gpio"; |
| 198 |
reg = <0x30000 0x50>; |
| 199 |
#gpio-cells = <2>; |
| 200 |
gpio-controller; |
| 201 |
ngpios = <4>; |
| 202 |
interrupt-controller; |
| 203 |
#interrupt-cells = <2>; |
| 204 |
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; |
| 205 |
}; |
| 206 |
|
| 207 |
pwm: pwm@31000 { |
| 208 |
compatible = "brcm,iproc-pwm"; |
| 209 |
reg = <0x31000 0x28>; |
| 210 |
clocks = <&osc>; |
| 211 |
#pwm-cells = <3>; |
| 212 |
status = "disabled"; |
| 213 |
}; |
| 214 |
|
| 215 |
rng: rng@33000 { |
| 216 |
compatible = "brcm,bcm-nsp-rng"; |
| 217 |
reg = <0x33000 0x14>; |
| 218 |
}; |
| 219 |
|
| 220 |
qspi: spi@27200 { |
| 221 |
compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi"; |
| 222 |
reg = <0x027200 0x184>, |
| 223 |
<0x027000 0x124>, |
| 224 |
<0x11c408 0x004>, |
| 225 |
<0x0273a0 0x01c>; |
| 226 |
reg-names = "mspi", "bspi", "intr_regs", |
| 227 |
"intr_status_reg"; |
| 228 |
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, |
| 229 |
<GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, |
| 230 |
<GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, |
| 231 |
<GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, |
| 232 |
<GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, |
| 233 |
<GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, |
| 234 |
<GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| 235 |
interrupt-names = "spi_lr_fullness_reached", |
| 236 |
"spi_lr_session_aborted", |
| 237 |
"spi_lr_impatient", |
| 238 |
"spi_lr_session_done", |
| 239 |
"spi_lr_overhead", |
| 240 |
"mspi_done", |
| 241 |
"mspi_halted"; |
| 242 |
num-cs = <2>; |
| 243 |
#address-cells = <1>; |
| 244 |
#size-cells = <0>; |
| 245 |
|
| 246 |
/* partitions defined in board DTS */ |
| 247 |
}; |
| 248 |
|
| 249 |
ccbtimer0: timer@34000 { |
| 250 |
compatible = "arm,sp804"; |
| 251 |
reg = <0x34000 0x1000>; |
| 252 |
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, |
| 253 |
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; |
| 254 |
}; |
| 255 |
|
| 256 |
ccbtimer1: timer@35000 { |
| 257 |
compatible = "arm,sp804"; |
| 258 |
reg = <0x35000 0x1000>; |
| 259 |
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, |
| 260 |
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; |
| 261 |
}; |
| 262 |
|
| 263 |
i2c0: i2c@38000 { |
| 264 |
compatible = "brcm,iproc-i2c"; |
| 265 |
reg = <0x38000 0x50>; |
| 266 |
#address-cells = <1>; |
| 267 |
#size-cells = <0>; |
| 268 |
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| 269 |
clock-frequency = <100000>; |
| 270 |
}; |
| 271 |
|
| 272 |
watchdog: watchdog@39000 { |
| 273 |
compatible = "arm,sp805", "arm,primecell"; |
| 274 |
reg = <0x39000 0x1000>; |
| 275 |
interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>; |
| 276 |
}; |
| 277 |
|
| 278 |
i2c1: i2c@3b000 { |
| 279 |
compatible = "brcm,iproc-i2c"; |
| 280 |
reg = <0x3b000 0x50>; |
| 281 |
#address-cells = <1>; |
| 282 |
#size-cells = <0>; |
| 283 |
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| 284 |
clock-frequency = <100000>; |
| 285 |
}; |
| 286 |
}; |
| 287 |
|
| 288 |
pflash: nor@20000000 { |
| 289 |
compatible = "cfi-flash", "jedec-flash"; |
| 290 |
reg = <0x20000000 0x04000000>; |
| 291 |
status = "disabled"; |
| 292 |
#address-cells = <1>; |
| 293 |
#size-cells = <1>; |
| 294 |
|
| 295 |
/* partitions defined in board DTS */ |
| 296 |
}; |
| 297 |
|
| 298 |
pcie0: pcie@18012000 { |
| 299 |
compatible = "brcm,iproc-pcie"; |
| 300 |
reg = <0x18012000 0x1000>; |
| 301 |
|
| 302 |
#interrupt-cells = <1>; |
| 303 |
interrupt-map-mask = <0 0 0 0>; |
| 304 |
interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; |
| 305 |
|
| 306 |
linux,pci-domain = <0>; |
| 307 |
|
| 308 |
bus-range = <0x00 0xff>; |
| 309 |
|
| 310 |
#address-cells = <3>; |
| 311 |
#size-cells = <2>; |
| 312 |
device_type = "pci"; |
| 313 |
|
| 314 |
/* Note: The HW does not support I/O resources. So, |
| 315 |
* only the memory resource range is being specified. |
| 316 |
*/ |
| 317 |
ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>; |
| 318 |
|
| 319 |
status = "disabled"; |
| 320 |
|
| 321 |
msi-parent = <&msi0>; |
| 322 |
msi0: msi { |
| 323 |
compatible = "brcm,iproc-msi"; |
| 324 |
msi-controller; |
| 325 |
interrupt-parent = <&gic>; |
| 326 |
interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, |
| 327 |
<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, |
| 328 |
<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, |
| 329 |
<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; |
| 330 |
brcm,pcie-msi-inten; |
| 331 |
}; |
| 332 |
}; |
| 333 |
|
| 334 |
pcie1: pcie@18013000 { |
| 335 |
compatible = "brcm,iproc-pcie"; |
| 336 |
reg = <0x18013000 0x1000>; |
| 337 |
|
| 338 |
#interrupt-cells = <1>; |
| 339 |
interrupt-map-mask = <0 0 0 0>; |
| 340 |
interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; |
| 341 |
|
| 342 |
linux,pci-domain = <1>; |
| 343 |
|
| 344 |
bus-range = <0x00 0xff>; |
| 345 |
|
| 346 |
#address-cells = <3>; |
| 347 |
#size-cells = <2>; |
| 348 |
device_type = "pci"; |
| 349 |
|
| 350 |
/* Note: The HW does not support I/O resources. So, |
| 351 |
* only the memory resource range is being specified. |
| 352 |
*/ |
| 353 |
ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>; |
| 354 |
|
| 355 |
status = "disabled"; |
| 356 |
|
| 357 |
msi-parent = <&msi1>; |
| 358 |
msi1: msi { |
| 359 |
compatible = "brcm,iproc-msi"; |
| 360 |
msi-controller; |
| 361 |
interrupt-parent = <&gic>; |
| 362 |
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, |
| 363 |
<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, |
| 364 |
<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, |
| 365 |
<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; |
| 366 |
brcm,pcie-msi-inten; |
| 367 |
}; |
| 368 |
}; |
| 369 |
}; |