| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 3 |
|
| 4 |
/ { |
| 5 |
#address-cells = <2>; |
| 6 |
#size-cells = <2>; |
| 7 |
model = "Broadcom STB (bcm7445)"; |
| 8 |
compatible = "brcm,bcm7445", "brcm,brcmstb"; |
| 9 |
interrupt-parent = <&gic>; |
| 10 |
|
| 11 |
chosen { |
| 12 |
bootargs = "console=ttyS0,115200 earlyprintk"; |
| 13 |
}; |
| 14 |
|
| 15 |
cpus { |
| 16 |
#address-cells = <1>; |
| 17 |
#size-cells = <0>; |
| 18 |
|
| 19 |
cpu@0 { |
| 20 |
compatible = "brcm,brahma-b15"; |
| 21 |
device_type = "cpu"; |
| 22 |
enable-method = "brcm,brahma-b15"; |
| 23 |
reg = <0>; |
| 24 |
}; |
| 25 |
|
| 26 |
cpu@1 { |
| 27 |
compatible = "brcm,brahma-b15"; |
| 28 |
device_type = "cpu"; |
| 29 |
enable-method = "brcm,brahma-b15"; |
| 30 |
reg = <1>; |
| 31 |
}; |
| 32 |
|
| 33 |
cpu@2 { |
| 34 |
compatible = "brcm,brahma-b15"; |
| 35 |
device_type = "cpu"; |
| 36 |
enable-method = "brcm,brahma-b15"; |
| 37 |
reg = <2>; |
| 38 |
}; |
| 39 |
|
| 40 |
cpu@3 { |
| 41 |
compatible = "brcm,brahma-b15"; |
| 42 |
device_type = "cpu"; |
| 43 |
enable-method = "brcm,brahma-b15"; |
| 44 |
reg = <3>; |
| 45 |
}; |
| 46 |
}; |
| 47 |
|
| 48 |
gic: interrupt-controller@ffd00000 { |
| 49 |
compatible = "brcm,brahma-b15-gic", "arm,cortex-a15-gic"; |
| 50 |
reg = <0x00 0xffd01000 0x00 0x1000>, |
| 51 |
<0x00 0xffd02000 0x00 0x2000>, |
| 52 |
<0x00 0xffd04000 0x00 0x2000>, |
| 53 |
<0x00 0xffd06000 0x00 0x2000>; |
| 54 |
interrupt-controller; |
| 55 |
#interrupt-cells = <3>; |
| 56 |
}; |
| 57 |
|
| 58 |
timer { |
| 59 |
compatible = "arm,armv7-timer"; |
| 60 |
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, |
| 61 |
<GIC_PPI 14 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, |
| 62 |
<GIC_PPI 11 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, |
| 63 |
<GIC_PPI 10 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>; |
| 64 |
}; |
| 65 |
|
| 66 |
rdb@f0000000 { |
| 67 |
#address-cells = <1>; |
| 68 |
#size-cells = <1>; |
| 69 |
compatible = "simple-bus"; |
| 70 |
ranges = <0 0x00 0xf0000000 0x1000000>; |
| 71 |
|
| 72 |
serial@40ab00 { |
| 73 |
compatible = "ns16550a"; |
| 74 |
reg = <0x40ab00 0x20>; |
| 75 |
reg-shift = <2>; |
| 76 |
reg-io-width = <4>; |
| 77 |
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| 78 |
clock-frequency = <81000000>; |
| 79 |
}; |
| 80 |
|
| 81 |
sun_top_ctrl: syscon@404000 { |
| 82 |
compatible = "brcm,bcm7445-sun-top-ctrl", |
| 83 |
"syscon"; |
| 84 |
reg = <0x404000 0x51c>; |
| 85 |
}; |
| 86 |
|
| 87 |
hif_cpubiuctrl: syscon@3e2400 { |
| 88 |
compatible = "brcm,bcm7445-hif-cpubiuctrl", |
| 89 |
"syscon"; |
| 90 |
reg = <0x3e2400 0x5b4>; |
| 91 |
}; |
| 92 |
|
| 93 |
hif_continuation: syscon@452000 { |
| 94 |
compatible = "brcm,bcm7445-hif-continuation", |
| 95 |
"syscon"; |
| 96 |
reg = <0x452000 0x100>; |
| 97 |
}; |
| 98 |
|
| 99 |
irq0_intc: interrupt-controller@40a780 { |
| 100 |
compatible = "brcm,bcm7120-l2-intc"; |
| 101 |
interrupt-parent = <&gic>; |
| 102 |
#interrupt-cells = <1>; |
| 103 |
reg = <0x40a780 0x8>; |
| 104 |
interrupt-controller; |
| 105 |
interrupts = <GIC_SPI 0x45 0x0>, |
| 106 |
<GIC_SPI 0x43 0x0>; |
| 107 |
brcm,int-map-mask = <0x25c>, <0x7000000>; |
| 108 |
brcm,int-fwd-mask = <0x70000>; |
| 109 |
}; |
| 110 |
|
| 111 |
irq0_aon_intc: interrupt-controller@417280 { |
| 112 |
compatible = "brcm,bcm7120-l2-intc"; |
| 113 |
reg = <0x417280 0x8>; |
| 114 |
interrupt-parent = <&gic>; |
| 115 |
#interrupt-cells = <1>; |
| 116 |
interrupt-controller; |
| 117 |
interrupts = <GIC_SPI 0x46 0x0>, |
| 118 |
<GIC_SPI 0x44 0x0>, |
| 119 |
<GIC_SPI 0x49 0x0>; |
| 120 |
brcm,int-map-mask = <0x1e3 0x18000000 0x100000>; |
| 121 |
brcm,int-fwd-mask = <0x0>; |
| 122 |
brcm,irq-can-wake; |
| 123 |
}; |
| 124 |
|
| 125 |
hif_intr2_intc: interrupt-controller@3e1000 { |
| 126 |
compatible = "brcm,l2-intc"; |
| 127 |
reg = <0x3e1000 0x30>; |
| 128 |
interrupt-controller; |
| 129 |
#interrupt-cells = <1>; |
| 130 |
interrupts = <GIC_SPI 0x20 0x0>; |
| 131 |
interrupt-parent = <&gic>; |
| 132 |
interrupt-names = "hif"; |
| 133 |
}; |
| 134 |
|
| 135 |
aon_pm_l2_intc: interrupt-controller@410640 { |
| 136 |
compatible = "brcm,l2-intc"; |
| 137 |
reg = <0x410640 0x30>; |
| 138 |
interrupt-controller; |
| 139 |
#interrupt-cells = <1>; |
| 140 |
interrupts = <GIC_SPI 0x40 0x0>; |
| 141 |
interrupt-parent = <&gic>; |
| 142 |
brcm,irq-can-wake; |
| 143 |
}; |
| 144 |
|
| 145 |
aon-ctrl@410000 { |
| 146 |
compatible = "brcm,brcmstb-aon-ctrl"; |
| 147 |
reg = <0x410000 0x200>, <0x410200 0x400>; |
| 148 |
reg-names = "aon-ctrl", "aon-sram"; |
| 149 |
}; |
| 150 |
|
| 151 |
nand_controller: nand-controller@3e2800 { |
| 152 |
status = "disabled"; |
| 153 |
#address-cells = <1>; |
| 154 |
#size-cells = <0>; |
| 155 |
compatible = "brcm,brcmnand-v7.1", "brcm,brcmnand"; |
| 156 |
reg-names = "nand", "flash-dma"; |
| 157 |
reg = <0x3e2800 0x600>, <0x3e3000 0x2c>; |
| 158 |
interrupt-parent = <&hif_intr2_intc>; |
| 159 |
interrupts = <24>, <4>; |
| 160 |
interrupt-names = "nand_ctlrdy", "flash_dma_done"; |
| 161 |
}; |
| 162 |
|
| 163 |
sata@45a000 { |
| 164 |
compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci"; |
| 165 |
reg-names = "ahci", "top-ctrl"; |
| 166 |
reg = <0x45a000 0xa9c>, <0x458040 0x24>; |
| 167 |
interrupts = <GIC_SPI 30 0>; |
| 168 |
#address-cells = <1>; |
| 169 |
#size-cells = <0>; |
| 170 |
|
| 171 |
sata0: sata-port@0 { |
| 172 |
reg = <0>; |
| 173 |
phys = <&sata_phy0>; |
| 174 |
}; |
| 175 |
|
| 176 |
sata1: sata-port@1 { |
| 177 |
reg = <1>; |
| 178 |
phys = <&sata_phy1>; |
| 179 |
}; |
| 180 |
}; |
| 181 |
|
| 182 |
sata_phy: sata-phy@458100 { |
| 183 |
compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3"; |
| 184 |
reg = <0x458100 0x1f00>; |
| 185 |
reg-names = "phy"; |
| 186 |
#address-cells = <0x1>; |
| 187 |
#size-cells = <0x0>; |
| 188 |
|
| 189 |
sata_phy0: sata-phy@0 { |
| 190 |
reg = <0>; |
| 191 |
#phy-cells = <0>; |
| 192 |
}; |
| 193 |
|
| 194 |
sata_phy1: sata-phy@1 { |
| 195 |
reg = <1>; |
| 196 |
#phy-cells = <0>; |
| 197 |
}; |
| 198 |
}; |
| 199 |
|
| 200 |
upg_gio: gpio@40a700 { |
| 201 |
compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio"; |
| 202 |
reg = <0x40a700 0x80>; |
| 203 |
#gpio-cells = <2>; |
| 204 |
#interrupt-cells = <2>; |
| 205 |
gpio-controller; |
| 206 |
interrupt-controller; |
| 207 |
interrupt-parent = <&irq0_intc>; |
| 208 |
interrupts = <6>; |
| 209 |
brcm,gpio-bank-widths = <32 32 32 24>; |
| 210 |
}; |
| 211 |
|
| 212 |
upg_gio_aon: gpio@4172c0 { |
| 213 |
compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio"; |
| 214 |
reg = <0x4172c0 0x40>; |
| 215 |
#gpio-cells = <2>; |
| 216 |
#interrupt-cells = <2>; |
| 217 |
gpio-controller; |
| 218 |
interrupt-controller; |
| 219 |
interrupts-extended = <&irq0_aon_intc 0x6>, |
| 220 |
<&aon_pm_l2_intc 0x5>; |
| 221 |
wakeup-source; |
| 222 |
brcm,gpio-bank-widths = <18 4>; |
| 223 |
}; |
| 224 |
|
| 225 |
}; |
| 226 |
|
| 227 |
memory_controllers@f1100000 { |
| 228 |
compatible = "simple-bus"; |
| 229 |
ranges = <0x0 0x0 0xf1100000 0x200000>; |
| 230 |
#address-cells = <1>; |
| 231 |
#size-cells = <1>; |
| 232 |
|
| 233 |
memc@0 { |
| 234 |
compatible = "brcm,brcmstb-memc", "simple-bus"; |
| 235 |
#address-cells = <1>; |
| 236 |
#size-cells = <1>; |
| 237 |
ranges = <0x0 0x0 0x80000>; |
| 238 |
|
| 239 |
memc-ddr@2000 { |
| 240 |
compatible = "brcm,brcmstb-memc-ddr-rev-b.1.x", |
| 241 |
"brcm,brcmstb-memc-ddr"; |
| 242 |
reg = <0x2000 0x800>; |
| 243 |
}; |
| 244 |
|
| 245 |
ddr-phy@6000 { |
| 246 |
compatible = "brcm,brcmstb-ddr-phy-v240.1"; |
| 247 |
reg = <0x6000 0x21c>; |
| 248 |
}; |
| 249 |
|
| 250 |
shimphy@8000 { |
| 251 |
compatible = "brcm,brcmstb-ddr-shimphy-v1.0"; |
| 252 |
reg = <0x8000 0xe4>; |
| 253 |
}; |
| 254 |
}; |
| 255 |
|
| 256 |
memc@80000 { |
| 257 |
compatible = "brcm,brcmstb-memc", "simple-bus"; |
| 258 |
#address-cells = <1>; |
| 259 |
#size-cells = <1>; |
| 260 |
ranges = <0x0 0x80000 0x80000>; |
| 261 |
|
| 262 |
memc-ddr@2000 { |
| 263 |
compatible = "brcm,brcmstb-memc-ddr-rev-b.1.x", |
| 264 |
"brcm,brcmstb-memc-ddr"; |
| 265 |
reg = <0x2000 0x800>; |
| 266 |
}; |
| 267 |
|
| 268 |
ddr-phy@6000 { |
| 269 |
compatible = "brcm,brcmstb-ddr-phy-v240.1"; |
| 270 |
reg = <0x6000 0x21c>; |
| 271 |
}; |
| 272 |
|
| 273 |
shimphy@8000 { |
| 274 |
compatible = "brcm,brcmstb-ddr-shimphy-v1.0"; |
| 275 |
reg = <0x8000 0xe4>; |
| 276 |
}; |
| 277 |
}; |
| 278 |
|
| 279 |
memc@100000 { |
| 280 |
compatible = "brcm,brcmstb-memc", "simple-bus"; |
| 281 |
#address-cells = <1>; |
| 282 |
#size-cells = <1>; |
| 283 |
ranges = <0x0 0x100000 0x80000>; |
| 284 |
|
| 285 |
memc-ddr@2000 { |
| 286 |
compatible = "brcm,brcmstb-memc-ddr-rev-b.1.x", |
| 287 |
"brcm,brcmstb-memc-ddr"; |
| 288 |
reg = <0x2000 0x800>; |
| 289 |
}; |
| 290 |
|
| 291 |
ddr-phy@6000 { |
| 292 |
compatible = "brcm,brcmstb-ddr-phy-v240.1"; |
| 293 |
reg = <0x6000 0x21c>; |
| 294 |
}; |
| 295 |
|
| 296 |
shimphy@8000 { |
| 297 |
compatible = "brcm,brcmstb-ddr-shimphy-v1.0"; |
| 298 |
reg = <0x8000 0xe4>; |
| 299 |
}; |
| 300 |
}; |
| 301 |
}; |
| 302 |
|
| 303 |
sram@ffe00000 { |
| 304 |
compatible = "brcm,boot-sram", "mmio-sram"; |
| 305 |
reg = <0x0 0xffe00000 0x0 0x10000>; |
| 306 |
}; |
| 307 |
|
| 308 |
smpboot { |
| 309 |
compatible = "brcm,brcmstb-smpboot"; |
| 310 |
syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>; |
| 311 |
syscon-cont = <&hif_continuation>; |
| 312 |
}; |
| 313 |
|
| 314 |
reboot { |
| 315 |
compatible = "brcm,brcmstb-reboot"; |
| 316 |
syscon = <&sun_top_ctrl 0x304 0x308>; |
| 317 |
}; |
| 318 |
}; |