Debian Codegraph @

arch/arm/boot/dts/broadcom/bcm28155-ap.dts

raw
1 // SPDX-License-Identifier: GPL-2.0-only
2 // Copyright (C) 2013 Broadcom Corporation
3
4 /dts-v1/;
5
6 #include <dt-bindings/gpio/gpio.h>
7
8 #include "bcm11351.dtsi"
9
10 / {
11 model = "BCM28155 AP board";
12 compatible = "brcm,bcm28155-ap", "brcm,bcm11351";
13
14 memory@80000000 {
15 device_type = "memory";
16 reg = <0x80000000 0x40000000>; /* 1 GB */
17 };
18 };
19
20 &bsc1 {
21 clock-frequency = <400000>;
22 status = "okay";
23 };
24
25 &bsc2 {
26 clock-frequency = <400000>;
27 status = "okay";
28 };
29
30 &bsc3 {
31 clock-frequency = <400000>;
32 status = "okay";
33 };
34
35 &pmu_bsc {
36 clock-frequency = <100000>;
37 status = "okay";
38
39 pmu: pmu@8 {
40 compatible = "brcm,bcm59056";
41 interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
42 reg = <0x08>;
43
44 regulators {
45 camldo1_reg: camldo1 {
46 regulator-min-microvolt = <3300000>;
47 regulator-max-microvolt = <3300000>;
48 regulator-always-on;
49 };
50
51 sdldo_reg: sdldo {
52 regulator-min-microvolt = <3000000>;
53 regulator-max-microvolt = <3000000>;
54 };
55
56 sdxldo_reg: sdxldo {
57 regulator-min-microvolt = <2700000>;
58 regulator-max-microvolt = <3300000>;
59 };
60
61 usbldo_reg: usbldo {
62 regulator-min-microvolt = <3300000>;
63 regulator-max-microvolt = <3300000>;
64 regulator-always-on;
65 };
66
67 iosr1_reg: iosr1 {
68 regulator-min-microvolt = <1800000>;
69 regulator-max-microvolt = <1800000>;
70 regulator-always-on;
71 };
72 };
73 };
74 };
75
76 &pwm {
77 status = "okay";
78 };
79
80 &sdio2 {
81 non-removable;
82 max-frequency = <48000000>;
83 vmmc-supply = <&camldo1_reg>;
84 vqmmc-supply = <&iosr1_reg>;
85 status = "okay";
86 };
87
88 &sdio4 {
89 max-frequency = <48000000>;
90 cd-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
91 vmmc-supply = <&sdldo_reg>;
92 vqmmc-supply = <&sdxldo_reg>;
93 status = "okay";
94 };
95
96 &uartb {
97 status = "okay";
98 };
99
100 &usbotg {
101 vusb_d-supply = <&usbldo_reg>;
102 vusb_a-supply = <&iosr1_reg>;
103 status = "okay";
104 };
105
106 &usbphy {
107 status = "okay";
108 };