Debian Codegraph @

arch/arm/boot/dts/broadcom/bcm4708-buffalo-wxr-1750dhp.dts

raw
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /*
3 * Author: Taishi Shimizu <[email protected]>
4 */
5
6 /dts-v1/;
7
8 #include "bcm4708.dtsi"
9 #include "bcm5301x-nand-cs0-bch8.dtsi"
10 #include <dt-bindings/leds/common.h>
11
12 / {
13 compatible = "buffalo,wxr-1750dhp", "brcm,bcm4708";
14 model = "Buffalo WXR-1750DHP";
15
16 memory@0 {
17 reg = <0x00000000 0x08000000>,
18 <0x88000000 0x08000000>;
19 device_type = "memory";
20 };
21
22 gpio-keys {
23 compatible = "gpio-keys";
24
25 button-aoss {
26 gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
27 label = "AOSS";
28 linux,code = <KEY_WPS_BUTTON>;
29 };
30
31 /* GPIO 3 is a switch button with AUTO / MANUAL. */
32 button-manual {
33 gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
34 label = "MANUAL";
35 linux,code = <BTN_0>;
36 linux,input-type = <EV_SW>;
37 };
38
39 button-restart {
40 gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
41 label = "Reset";
42 linux,code = <KEY_RESTART>;
43 };
44
45 /* GPIO 8 and 9 are a tri-state switch button with
46 * ROUTER / AP / WB.
47 */
48 button-router {
49 gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
50 label = "ROUTER";
51 linux,code = <BTN_1>;
52 linux,input-type = <EV_SW>;
53 };
54
55 button-wb {
56 gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
57 label = "WB";
58 linux,code = <BTN_2>;
59 linux,input-type = <EV_SW>;
60 };
61 };
62
63 leds {
64 compatible = "gpio-leds";
65
66 led-internet {
67 color = <LED_COLOR_ID_WHITE>;
68 function = "internet";
69 gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
70 };
71
72 led-power0 {
73 color = <LED_COLOR_ID_AMBER>;
74 function = LED_FUNCTION_POWER;
75 gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
76 };
77
78 led-power1 {
79 color = <LED_COLOR_ID_WHITE>;
80 function = LED_FUNCTION_POWER;
81 gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
82 };
83
84 led-router0 {
85 color = <LED_COLOR_ID_AMBER>;
86 function = "router";
87 gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
88 };
89
90 led-router1 {
91 color = <LED_COLOR_ID_WHITE>;
92 function = "router";
93 gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
94 };
95
96 led-usb {
97 color = <LED_COLOR_ID_GREEN>;
98 function = LED_FUNCTION_USB;
99 gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
100 linux,default-trigger = "usbport";
101 trigger-sources = <&xhci_port1 &ehci_port1 &ohci_port1>;
102 };
103 };
104 };
105
106 &srab {
107 status = "okay";
108
109 ports {
110 port@0 {
111 label = "wan";
112 };
113
114 port@1 {
115 label = "lan4";
116 };
117
118 port@2 {
119 label = "lan3";
120 };
121
122 port@3 {
123 label = "lan2";
124 };
125
126 port@4 {
127 label = "lan1";
128 };
129 };
130 };
131
132 &usb3 {
133 vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
134 };
135
136 &usb3_phy {
137 status = "okay";
138 };