Debian Codegraph @

arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts

raw
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /*
3 * Broadcom BCM470X / BCM5301X ARM platform code.
4 * DTS for Meraki MR26 / Codename: Venom
5 *
6 * Copyright (C) 2022 Christian Lamparter <[email protected]>
7 */
8
9 /dts-v1/;
10
11 #include "bcm4708.dtsi"
12 #include "bcm5301x-nand-cs0-bch8.dtsi"
13 #include <dt-bindings/leds/common.h>
14
15 / {
16 compatible = "meraki,mr26", "brcm,bcm53015", "brcm,bcm4708";
17 model = "Meraki MR26";
18
19 memory@0 {
20 reg = <0x00000000 0x08000000>;
21 device_type = "memory";
22 };
23
24 leds {
25 compatible = "gpio-leds";
26
27 led-0 {
28 function = LED_FUNCTION_FAULT;
29 color = <LED_COLOR_ID_AMBER>;
30 gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
31 panic-indicator;
32 };
33 led-1 {
34 function = LED_FUNCTION_INDICATOR;
35 color = <LED_COLOR_ID_WHITE>;
36 gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
37 };
38 };
39
40 keys {
41 compatible = "gpio-keys";
42
43 key-restart {
44 label = "Reset";
45 linux,code = <KEY_RESTART>;
46 gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
47 };
48 };
49 };
50
51 &uart0 {
52 clock-frequency = <50000000>;
53 /delete-property/ clocks;
54 };
55
56 &uart1 {
57 status = "disabled";
58 };
59
60 &gmac0 {
61 status = "okay";
62
63 nvmem-cells = <&macaddr_board_config_66>;
64 nvmem-cell-names = "mac-address";
65 };
66
67 &gmac1 {
68 status = "disabled";
69 };
70 &gmac2 {
71 status = "disabled";
72 };
73 &gmac3 {
74 status = "disabled";
75 };
76
77 &nandcs {
78 partitions {
79 compatible = "fixed-partitions";
80 #address-cells = <0x1>;
81 #size-cells = <0x1>;
82
83 partition@0 {
84 label = "u-boot";
85 reg = <0x0 0x200000>;
86 read-only;
87 };
88
89 partition@200000 {
90 label = "u-boot-env";
91 reg = <0x200000 0x200000>;
92 /* empty */
93 };
94
95 partition@400000 {
96 label = "u-boot-backup";
97 reg = <0x400000 0x200000>;
98 /* empty */
99 };
100
101 partition@600000 {
102 label = "u-boot-env-backup";
103 reg = <0x600000 0x200000>;
104 /* empty */
105 };
106
107 partition@800000 {
108 compatible = "linux,ubi";
109 label = "ubi";
110 reg = <0x800000 0x7780000>;
111
112 volumes {
113 ubi-volume-board-config {
114 volname = "board-config";
115
116 nvmem-layout {
117 compatible = "fixed-layout";
118 #address-cells = <1>;
119 #size-cells = <1>;
120
121 macaddr_board_config_66: macaddr@66 {
122 reg = <0x66 0x6>;
123 };
124 };
125 };
126 };
127 };
128 };
129 };
130
131 &srab {
132 status = "okay";
133
134 ports {
135 port@0 {
136 label = "poe";
137 };
138
139 port@5 {
140 label = "cpu";
141
142 fixed-link {
143 speed = <1000>;
144 full-duplex;
145 };
146 };
147
148 port@7 {
149 status = "disabled";
150 };
151
152 port@8 {
153 status = "disabled";
154 };
155 };
156 };
157
158 &i2c0 {
159 status = "okay";
160
161 pinctrl-names = "default";
162 pinctrl-0 = <&pinmux_i2c>;
163
164 clock-frequency = <100000>;
165
166 ina219@40 {
167 compatible = "ti,ina219"; /* PoE power */
168 reg = <0x40>;
169 shunt-resistor = <60000>; /* = 60 mOhms */
170 };
171
172 eeprom@56 {
173 compatible = "atmel,24c64";
174 reg = <0x56>;
175 pagesize = <32>;
176 read-only;
177 #address-cells = <1>;
178 #size-cells = <1>;
179
180 /* it's empty */
181 };
182 };
183
184 &thermal {
185 status = "disabled";
186 /* does not work, reads 418 degree Celsius */
187 };