| 1 |
/* |
| 2 |
* BSD LICENSE |
| 3 |
* |
| 4 |
* Copyright(c) 2014 Broadcom Corporation. All rights reserved. |
| 5 |
* |
| 6 |
* Redistribution and use in source and binary forms, with or without |
| 7 |
* modification, are permitted provided that the following conditions |
| 8 |
* are met: |
| 9 |
* |
| 10 |
* * Redistributions of source code must retain the above copyright |
| 11 |
* notice, this list of conditions and the following disclaimer. |
| 12 |
* * Redistributions in binary form must reproduce the above copyright |
| 13 |
* notice, this list of conditions and the following disclaimer in |
| 14 |
* the documentation and/or other materials provided with the |
| 15 |
* distribution. |
| 16 |
* * Neither the name of Broadcom Corporation nor the names of its |
| 17 |
* contributors may be used to endorse or promote products derived |
| 18 |
* from this software without specific prior written permission. |
| 19 |
* |
| 20 |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| 21 |
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| 22 |
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| 23 |
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| 24 |
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| 25 |
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| 26 |
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| 27 |
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| 28 |
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| 29 |
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| 30 |
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| 31 |
*/ |
| 32 |
|
| 33 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 34 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 35 |
#include <dt-bindings/clock/bcm-cygnus.h> |
| 36 |
|
| 37 |
/ { |
| 38 |
#address-cells = <1>; |
| 39 |
#size-cells = <1>; |
| 40 |
compatible = "brcm,cygnus"; |
| 41 |
model = "Broadcom Cygnus SoC"; |
| 42 |
interrupt-parent = <&gic>; |
| 43 |
|
| 44 |
aliases { |
| 45 |
ethernet0 = ð0; |
| 46 |
}; |
| 47 |
|
| 48 |
memory@0 { |
| 49 |
device_type = "memory"; |
| 50 |
reg = <0 0>; |
| 51 |
}; |
| 52 |
|
| 53 |
cpus { |
| 54 |
#address-cells = <1>; |
| 55 |
#size-cells = <0>; |
| 56 |
|
| 57 |
cpu@0 { |
| 58 |
device_type = "cpu"; |
| 59 |
compatible = "arm,cortex-a9"; |
| 60 |
next-level-cache = <&L2>; |
| 61 |
reg = <0x0>; |
| 62 |
}; |
| 63 |
}; |
| 64 |
|
| 65 |
/include/ "bcm-cygnus-clock.dtsi" |
| 66 |
|
| 67 |
pmu { |
| 68 |
compatible = "arm,cortex-a9-pmu"; |
| 69 |
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| 70 |
}; |
| 71 |
|
| 72 |
core@19000000 { |
| 73 |
compatible = "simple-bus"; |
| 74 |
ranges = <0x00000000 0x19000000 0x1000000>; |
| 75 |
#address-cells = <1>; |
| 76 |
#size-cells = <1>; |
| 77 |
|
| 78 |
timer@20200 { |
| 79 |
compatible = "arm,cortex-a9-global-timer"; |
| 80 |
reg = <0x20200 0x100>; |
| 81 |
interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; |
| 82 |
clocks = <&periph_clk>; |
| 83 |
}; |
| 84 |
|
| 85 |
gic: interrupt-controller@21000 { |
| 86 |
compatible = "arm,cortex-a9-gic"; |
| 87 |
#interrupt-cells = <3>; |
| 88 |
#address-cells = <0>; |
| 89 |
interrupt-controller; |
| 90 |
reg = <0x21000 0x1000>, |
| 91 |
<0x20100 0x100>; |
| 92 |
}; |
| 93 |
|
| 94 |
L2: cache-controller@22000 { |
| 95 |
compatible = "arm,pl310-cache"; |
| 96 |
reg = <0x22000 0x1000>; |
| 97 |
cache-unified; |
| 98 |
cache-level = <2>; |
| 99 |
}; |
| 100 |
}; |
| 101 |
|
| 102 |
axi { |
| 103 |
compatible = "simple-bus"; |
| 104 |
ranges; |
| 105 |
#address-cells = <1>; |
| 106 |
#size-cells = <1>; |
| 107 |
|
| 108 |
otp: otp@301c800 { |
| 109 |
compatible = "brcm,ocotp"; |
| 110 |
reg = <0x0301c800 0x2c>; |
| 111 |
brcm,ocotp-size = <2048>; |
| 112 |
status = "disabled"; |
| 113 |
}; |
| 114 |
|
| 115 |
pcie_phy: pcie_phy@301d0a0 { |
| 116 |
compatible = "brcm,cygnus-pcie-phy"; |
| 117 |
reg = <0x0301d0a0 0x14>; |
| 118 |
#address-cells = <1>; |
| 119 |
#size-cells = <0>; |
| 120 |
|
| 121 |
pcie0_phy: pcie-phy@0 { |
| 122 |
reg = <0>; |
| 123 |
#phy-cells = <0>; |
| 124 |
}; |
| 125 |
|
| 126 |
pcie1_phy: pcie-phy@1 { |
| 127 |
reg = <1>; |
| 128 |
#phy-cells = <0>; |
| 129 |
}; |
| 130 |
}; |
| 131 |
|
| 132 |
pinctrl: pinctrl@301d0c8 { |
| 133 |
compatible = "brcm,cygnus-pinmux"; |
| 134 |
reg = <0x0301d0c8 0x30>, |
| 135 |
<0x0301d24c 0x2c>; |
| 136 |
|
| 137 |
spi_0: spi_0 { |
| 138 |
function = "spi0"; |
| 139 |
groups = "spi0_grp"; |
| 140 |
}; |
| 141 |
|
| 142 |
spi_1: spi_1 { |
| 143 |
function = "spi1"; |
| 144 |
groups = "spi1_grp"; |
| 145 |
}; |
| 146 |
|
| 147 |
spi_2: spi_2 { |
| 148 |
function = "spi2"; |
| 149 |
groups = "spi2_grp"; |
| 150 |
}; |
| 151 |
}; |
| 152 |
|
| 153 |
mailbox: mailbox@3024024 { |
| 154 |
compatible = "brcm,iproc-mailbox"; |
| 155 |
reg = <0x03024024 0x40>; |
| 156 |
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; |
| 157 |
#interrupt-cells = <1>; |
| 158 |
interrupt-controller; |
| 159 |
#mbox-cells = <1>; |
| 160 |
}; |
| 161 |
|
| 162 |
gpio_crmu: gpio@3024800 { |
| 163 |
compatible = "brcm,cygnus-crmu-gpio"; |
| 164 |
reg = <0x03024800 0x50>, |
| 165 |
<0x03024008 0x18>; |
| 166 |
ngpios = <6>; |
| 167 |
#gpio-cells = <2>; |
| 168 |
gpio-controller; |
| 169 |
interrupt-controller; |
| 170 |
#interrupt-cells = <2>; |
| 171 |
interrupt-parent = <&mailbox>; |
| 172 |
interrupts = <0>; |
| 173 |
}; |
| 174 |
|
| 175 |
mdio: mdio@18002000 { |
| 176 |
compatible = "brcm,iproc-mdio"; |
| 177 |
reg = <0x18002000 0x8>; |
| 178 |
#size-cells = <0>; |
| 179 |
#address-cells = <1>; |
| 180 |
status = "disabled"; |
| 181 |
|
| 182 |
gphy0: ethernet-phy@0 { |
| 183 |
reg = <0>; |
| 184 |
}; |
| 185 |
|
| 186 |
gphy1: ethernet-phy@1 { |
| 187 |
reg = <1>; |
| 188 |
}; |
| 189 |
}; |
| 190 |
|
| 191 |
switch: switch@18007000 { |
| 192 |
compatible = "brcm,bcm11360-srab", "brcm,cygnus-srab"; |
| 193 |
reg = <0x18007000 0x1000>; |
| 194 |
status = "disabled"; |
| 195 |
|
| 196 |
ports { |
| 197 |
#address-cells = <1>; |
| 198 |
#size-cells = <0>; |
| 199 |
|
| 200 |
port@0 { |
| 201 |
reg = <0>; |
| 202 |
phy-handle = <&gphy0>; |
| 203 |
phy-mode = "rgmii"; |
| 204 |
}; |
| 205 |
|
| 206 |
port@1 { |
| 207 |
reg = <1>; |
| 208 |
phy-handle = <&gphy1>; |
| 209 |
phy-mode = "rgmii"; |
| 210 |
}; |
| 211 |
|
| 212 |
port@8 { |
| 213 |
reg = <8>; |
| 214 |
label = "cpu"; |
| 215 |
ethernet = <ð0>; |
| 216 |
fixed-link { |
| 217 |
speed = <1000>; |
| 218 |
full-duplex; |
| 219 |
}; |
| 220 |
}; |
| 221 |
}; |
| 222 |
}; |
| 223 |
|
| 224 |
i2c0: i2c@18008000 { |
| 225 |
compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; |
| 226 |
reg = <0x18008000 0x100>; |
| 227 |
#address-cells = <1>; |
| 228 |
#size-cells = <0>; |
| 229 |
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; |
| 230 |
clock-frequency = <100000>; |
| 231 |
status = "disabled"; |
| 232 |
}; |
| 233 |
|
| 234 |
wdt0: wdt@18009000 { |
| 235 |
compatible = "arm,sp805" , "arm,primecell"; |
| 236 |
reg = <0x18009000 0x1000>; |
| 237 |
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; |
| 238 |
clocks = <&axi81_clk>, <&axi81_clk>; |
| 239 |
clock-names = "wdog_clk", "apb_pclk"; |
| 240 |
}; |
| 241 |
|
| 242 |
gpio_ccm: gpio@1800a000 { |
| 243 |
compatible = "brcm,cygnus-ccm-gpio"; |
| 244 |
reg = <0x1800a000 0x50>, |
| 245 |
<0x0301d164 0x20>; |
| 246 |
ngpios = <24>; |
| 247 |
#gpio-cells = <2>; |
| 248 |
gpio-controller; |
| 249 |
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| 250 |
interrupt-controller; |
| 251 |
#interrupt-cells = <2>; |
| 252 |
}; |
| 253 |
|
| 254 |
i2c1: i2c@1800b000 { |
| 255 |
compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; |
| 256 |
reg = <0x1800b000 0x100>; |
| 257 |
#address-cells = <1>; |
| 258 |
#size-cells = <0>; |
| 259 |
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| 260 |
clock-frequency = <100000>; |
| 261 |
status = "disabled"; |
| 262 |
}; |
| 263 |
|
| 264 |
pcie0: pcie@18012000 { |
| 265 |
compatible = "brcm,iproc-pcie"; |
| 266 |
reg = <0x18012000 0x1000>; |
| 267 |
|
| 268 |
#interrupt-cells = <1>; |
| 269 |
interrupt-map-mask = <0 0 0 0>; |
| 270 |
interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; |
| 271 |
|
| 272 |
linux,pci-domain = <0>; |
| 273 |
|
| 274 |
bus-range = <0x00 0xff>; |
| 275 |
|
| 276 |
#address-cells = <3>; |
| 277 |
#size-cells = <2>; |
| 278 |
device_type = "pci"; |
| 279 |
ranges = <0x81000000 0 0 0x28000000 0 0x00010000>, |
| 280 |
<0x82000000 0 0x20000000 0x20000000 0 0x04000000>; |
| 281 |
|
| 282 |
phys = <&pcie0_phy>; |
| 283 |
phy-names = "pcie-phy"; |
| 284 |
|
| 285 |
status = "disabled"; |
| 286 |
|
| 287 |
msi-parent = <&msi0>; |
| 288 |
msi0: msi { |
| 289 |
compatible = "brcm,iproc-msi"; |
| 290 |
msi-controller; |
| 291 |
interrupt-parent = <&gic>; |
| 292 |
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, |
| 293 |
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, |
| 294 |
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, |
| 295 |
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; |
| 296 |
}; |
| 297 |
}; |
| 298 |
|
| 299 |
pcie1: pcie@18013000 { |
| 300 |
compatible = "brcm,iproc-pcie"; |
| 301 |
reg = <0x18013000 0x1000>; |
| 302 |
|
| 303 |
#interrupt-cells = <1>; |
| 304 |
interrupt-map-mask = <0 0 0 0>; |
| 305 |
interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; |
| 306 |
|
| 307 |
linux,pci-domain = <1>; |
| 308 |
|
| 309 |
bus-range = <0x00 0xff>; |
| 310 |
|
| 311 |
#address-cells = <3>; |
| 312 |
#size-cells = <2>; |
| 313 |
device_type = "pci"; |
| 314 |
ranges = <0x81000000 0 0 0x48000000 0 0x00010000>, |
| 315 |
<0x82000000 0 0x40000000 0x40000000 0 0x04000000>; |
| 316 |
|
| 317 |
phys = <&pcie1_phy>; |
| 318 |
phy-names = "pcie-phy"; |
| 319 |
|
| 320 |
status = "disabled"; |
| 321 |
|
| 322 |
msi-parent = <&msi1>; |
| 323 |
msi1: msi { |
| 324 |
compatible = "brcm,iproc-msi"; |
| 325 |
msi-controller; |
| 326 |
interrupt-parent = <&gic>; |
| 327 |
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, |
| 328 |
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, |
| 329 |
<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, |
| 330 |
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; |
| 331 |
}; |
| 332 |
}; |
| 333 |
|
| 334 |
dma0: dma@18018000 { |
| 335 |
compatible = "arm,pl330", "arm,primecell"; |
| 336 |
reg = <0x18018000 0x1000>; |
| 337 |
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, |
| 338 |
<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, |
| 339 |
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, |
| 340 |
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, |
| 341 |
<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, |
| 342 |
<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, |
| 343 |
<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, |
| 344 |
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, |
| 345 |
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; |
| 346 |
clocks = <&apb_clk>; |
| 347 |
clock-names = "apb_pclk"; |
| 348 |
#dma-cells = <1>; |
| 349 |
}; |
| 350 |
|
| 351 |
uart0: serial@18020000 { |
| 352 |
compatible = "snps,dw-apb-uart"; |
| 353 |
reg = <0x18020000 0x100>; |
| 354 |
reg-shift = <2>; |
| 355 |
reg-io-width = <4>; |
| 356 |
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| 357 |
clocks = <&axi81_clk>; |
| 358 |
clock-frequency = <100000000>; |
| 359 |
status = "disabled"; |
| 360 |
}; |
| 361 |
|
| 362 |
uart1: serial@18021000 { |
| 363 |
compatible = "snps,dw-apb-uart"; |
| 364 |
reg = <0x18021000 0x100>; |
| 365 |
reg-shift = <2>; |
| 366 |
reg-io-width = <4>; |
| 367 |
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; |
| 368 |
clocks = <&axi81_clk>; |
| 369 |
clock-frequency = <100000000>; |
| 370 |
status = "disabled"; |
| 371 |
}; |
| 372 |
|
| 373 |
uart2: serial@18022000 { |
| 374 |
compatible = "snps,dw-apb-uart"; |
| 375 |
reg = <0x18022000 0x100>; |
| 376 |
reg-shift = <2>; |
| 377 |
reg-io-width = <4>; |
| 378 |
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| 379 |
clocks = <&axi81_clk>; |
| 380 |
clock-frequency = <100000000>; |
| 381 |
status = "disabled"; |
| 382 |
}; |
| 383 |
|
| 384 |
uart3: serial@18023000 { |
| 385 |
compatible = "snps,dw-apb-uart"; |
| 386 |
reg = <0x18023000 0x100>; |
| 387 |
reg-shift = <2>; |
| 388 |
reg-io-width = <4>; |
| 389 |
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; |
| 390 |
clocks = <&axi81_clk>; |
| 391 |
clock-frequency = <100000000>; |
| 392 |
status = "disabled"; |
| 393 |
}; |
| 394 |
|
| 395 |
spi0: spi@18028000 { |
| 396 |
compatible = "arm,pl022", "arm,primecell"; |
| 397 |
reg = <0x18028000 0x1000>; |
| 398 |
#address-cells = <1>; |
| 399 |
#size-cells = <0>; |
| 400 |
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; |
| 401 |
pinctrl-0 = <&spi_0>; |
| 402 |
clocks = <&axi81_clk>, <&axi81_clk>; |
| 403 |
clock-names = "sspclk", "apb_pclk"; |
| 404 |
status = "disabled"; |
| 405 |
}; |
| 406 |
|
| 407 |
spi1: spi@18029000 { |
| 408 |
compatible = "arm,pl022", "arm,primecell"; |
| 409 |
reg = <0x18029000 0x1000>; |
| 410 |
#address-cells = <1>; |
| 411 |
#size-cells = <0>; |
| 412 |
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; |
| 413 |
pinctrl-0 = <&spi_1>; |
| 414 |
clocks = <&axi81_clk>, <&axi81_clk>; |
| 415 |
clock-names = "sspclk", "apb_pclk"; |
| 416 |
status = "disabled"; |
| 417 |
}; |
| 418 |
|
| 419 |
spi2: spi@1802a000 { |
| 420 |
compatible = "arm,pl022", "arm,primecell"; |
| 421 |
reg = <0x1802a000 0x1000>; |
| 422 |
#address-cells = <1>; |
| 423 |
#size-cells = <0>; |
| 424 |
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; |
| 425 |
pinctrl-0 = <&spi_2>; |
| 426 |
clocks = <&axi81_clk>, <&axi81_clk>; |
| 427 |
clock-names = "sspclk", "apb_pclk"; |
| 428 |
status = "disabled"; |
| 429 |
}; |
| 430 |
|
| 431 |
rng: rng@18032000 { |
| 432 |
compatible = "brcm,iproc-rng200"; |
| 433 |
reg = <0x18032000 0x28>; |
| 434 |
}; |
| 435 |
|
| 436 |
sdhci0: sdhci@18041000 { |
| 437 |
compatible = "brcm,sdhci-iproc-cygnus"; |
| 438 |
reg = <0x18041000 0x100>; |
| 439 |
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; |
| 440 |
clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>; |
| 441 |
bus-width = <4>; |
| 442 |
sdhci,auto-cmd12; |
| 443 |
status = "disabled"; |
| 444 |
}; |
| 445 |
|
| 446 |
eth0: ethernet@18042000 { |
| 447 |
compatible = "brcm,amac"; |
| 448 |
reg = <0x18042000 0x1000>, |
| 449 |
<0x18110000 0x1000>; |
| 450 |
reg-names = "amac_base", "idm_base"; |
| 451 |
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; |
| 452 |
status = "disabled"; |
| 453 |
}; |
| 454 |
|
| 455 |
sdhci1: sdhci@18043000 { |
| 456 |
compatible = "brcm,sdhci-iproc-cygnus"; |
| 457 |
reg = <0x18043000 0x100>; |
| 458 |
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; |
| 459 |
clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>; |
| 460 |
bus-width = <4>; |
| 461 |
sdhci,auto-cmd12; |
| 462 |
status = "disabled"; |
| 463 |
}; |
| 464 |
|
| 465 |
nand_controller: nand-controller@18046000 { |
| 466 |
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; |
| 467 |
reg = <0x18046000 0x600>, <0xf8105408 0x600>, |
| 468 |
<0x18046f00 0x20>; |
| 469 |
reg-names = "nand", "iproc-idm", "iproc-ext"; |
| 470 |
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; |
| 471 |
|
| 472 |
#address-cells = <1>; |
| 473 |
#size-cells = <0>; |
| 474 |
|
| 475 |
brcm,nand-has-wp; |
| 476 |
}; |
| 477 |
|
| 478 |
ehci0: usb@18048000 { |
| 479 |
compatible = "generic-ehci"; |
| 480 |
reg = <0x18048000 0x100>; |
| 481 |
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; |
| 482 |
status = "disabled"; |
| 483 |
}; |
| 484 |
|
| 485 |
ohci0: usb@18048800 { |
| 486 |
compatible = "generic-ohci"; |
| 487 |
reg = <0x18048800 0x100>; |
| 488 |
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; |
| 489 |
status = "disabled"; |
| 490 |
}; |
| 491 |
|
| 492 |
clcd: clcd@180a0000 { |
| 493 |
compatible = "arm,pl111", "arm,primecell"; |
| 494 |
reg = <0x180a0000 0x1000>; |
| 495 |
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; |
| 496 |
interrupt-names = "combined"; |
| 497 |
clocks = <&axi41_clk>, <&apb_clk>; |
| 498 |
clock-names = "clcdclk", "apb_pclk"; |
| 499 |
status = "disabled"; |
| 500 |
}; |
| 501 |
|
| 502 |
v3d: v3d@180a2000 { |
| 503 |
compatible = "brcm,cygnus-v3d"; |
| 504 |
reg = <0x180a2000 0x1000>; |
| 505 |
clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>; |
| 506 |
clock-names = "v3d_clk"; |
| 507 |
interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; |
| 508 |
status = "disabled"; |
| 509 |
}; |
| 510 |
|
| 511 |
vc4: gpu { |
| 512 |
compatible = "brcm,cygnus-vc4"; |
| 513 |
}; |
| 514 |
|
| 515 |
gpio_asiu: gpio@180a5000 { |
| 516 |
compatible = "brcm,cygnus-asiu-gpio"; |
| 517 |
reg = <0x180a5000 0x668>; |
| 518 |
ngpios = <146>; |
| 519 |
#gpio-cells = <2>; |
| 520 |
gpio-controller; |
| 521 |
|
| 522 |
interrupt-controller; |
| 523 |
#interrupt-cells = <2>; |
| 524 |
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; |
| 525 |
gpio-ranges = <&pinctrl 0 42 1>, |
| 526 |
<&pinctrl 1 44 3>, |
| 527 |
<&pinctrl 4 48 1>, |
| 528 |
<&pinctrl 5 50 3>, |
| 529 |
<&pinctrl 8 126 1>, |
| 530 |
<&pinctrl 9 155 1>, |
| 531 |
<&pinctrl 10 152 1>, |
| 532 |
<&pinctrl 11 154 1>, |
| 533 |
<&pinctrl 12 153 1>, |
| 534 |
<&pinctrl 13 127 3>, |
| 535 |
<&pinctrl 16 140 1>, |
| 536 |
<&pinctrl 17 145 7>, |
| 537 |
<&pinctrl 24 130 10>, |
| 538 |
<&pinctrl 34 141 4>, |
| 539 |
<&pinctrl 38 54 1>, |
| 540 |
<&pinctrl 39 56 3>, |
| 541 |
<&pinctrl 42 60 3>, |
| 542 |
<&pinctrl 45 64 3>, |
| 543 |
<&pinctrl 48 68 2>, |
| 544 |
<&pinctrl 50 84 6>, |
| 545 |
<&pinctrl 56 94 6>, |
| 546 |
<&pinctrl 62 72 1>, |
| 547 |
<&pinctrl 63 70 1>, |
| 548 |
<&pinctrl 64 80 1>, |
| 549 |
<&pinctrl 65 74 3>, |
| 550 |
<&pinctrl 68 78 1>, |
| 551 |
<&pinctrl 69 82 1>, |
| 552 |
<&pinctrl 70 156 17>, |
| 553 |
<&pinctrl 87 104 12>, |
| 554 |
<&pinctrl 99 102 2>, |
| 555 |
<&pinctrl 101 90 4>, |
| 556 |
<&pinctrl 105 116 6>, |
| 557 |
<&pinctrl 111 100 2>, |
| 558 |
<&pinctrl 113 122 4>, |
| 559 |
<&pinctrl 123 11 1>, |
| 560 |
<&pinctrl 124 38 4>, |
| 561 |
<&pinctrl 128 43 1>, |
| 562 |
<&pinctrl 129 47 1>, |
| 563 |
<&pinctrl 130 49 1>, |
| 564 |
<&pinctrl 131 53 1>, |
| 565 |
<&pinctrl 132 55 1>, |
| 566 |
<&pinctrl 133 59 1>, |
| 567 |
<&pinctrl 134 63 1>, |
| 568 |
<&pinctrl 135 67 1>, |
| 569 |
<&pinctrl 136 71 1>, |
| 570 |
<&pinctrl 137 73 1>, |
| 571 |
<&pinctrl 138 77 1>, |
| 572 |
<&pinctrl 139 79 1>, |
| 573 |
<&pinctrl 140 81 1>, |
| 574 |
<&pinctrl 141 83 1>, |
| 575 |
<&pinctrl 142 10 1>; |
| 576 |
}; |
| 577 |
|
| 578 |
ts_adc_syscon: ts_adc_syscon@180a6000 { |
| 579 |
compatible = "brcm,iproc-ts-adc-syscon", "syscon"; |
| 580 |
reg = <0x180a6000 0xc30>; |
| 581 |
}; |
| 582 |
|
| 583 |
touchscreen: touchscreen@180a6000 { |
| 584 |
compatible = "brcm,iproc-touchscreen"; |
| 585 |
#address-cells = <1>; |
| 586 |
#size-cells = <1>; |
| 587 |
ts_syscon = <&ts_adc_syscon>; |
| 588 |
clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>; |
| 589 |
clock-names = "tsc_clk"; |
| 590 |
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; |
| 591 |
status = "disabled"; |
| 592 |
}; |
| 593 |
|
| 594 |
adc: adc@180a6000 { |
| 595 |
compatible = "brcm,iproc-static-adc"; |
| 596 |
#io-channel-cells = <1>; |
| 597 |
adc-syscon = <&ts_adc_syscon>; |
| 598 |
clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>; |
| 599 |
clock-names = "tsc_clk"; |
| 600 |
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; |
| 601 |
status = "disabled"; |
| 602 |
}; |
| 603 |
|
| 604 |
pwm: pwm@180aa500 { |
| 605 |
compatible = "brcm,kona-pwm"; |
| 606 |
reg = <0x180aa500 0xc4>; |
| 607 |
#pwm-cells = <3>; |
| 608 |
clocks = <&asiu_clks BCM_CYGNUS_ASIU_PWM_CLK>; |
| 609 |
status = "disabled"; |
| 610 |
}; |
| 611 |
|
| 612 |
keypad: keypad@180ac000 { |
| 613 |
compatible = "brcm,bcm-keypad"; |
| 614 |
reg = <0x180ac000 0x14c>; |
| 615 |
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; |
| 616 |
clocks = <&asiu_clks BCM_CYGNUS_ASIU_KEYPAD_CLK>; |
| 617 |
clock-names = "peri_clk"; |
| 618 |
clock-frequency = <31250>; |
| 619 |
pull-up-enabled; |
| 620 |
col-debounce-filter-period = <0>; |
| 621 |
status-debounce-filter-period = <0>; |
| 622 |
row-output-enabled; |
| 623 |
status = "disabled"; |
| 624 |
}; |
| 625 |
}; |
| 626 |
}; |