Debian Codegraph @

doc/locale/ja/LC_MESSAGES/reference/commands/logical_count.po

raw
1 # -*- po -*-
2 # Japanese translations for 1.2.1 package.
3 # Copyright (C) 2009-2011, Brazil, Inc
4 # This file is distributed under the same license as the groonga package.
5 # Kouhei Sutou <[email protected]>, 2011.
6 msgid ""
7 msgstr ""
8 "Project-Id-Version: 1.2.1\n"
9 "Report-Msgid-Bugs-To: \n"
10 "PO-Revision-Date: 2022-02-09 09:45+0900\n"
11 "Language-Team: Japanese\n"
12 "Language: ja\n"
13 "MIME-Version: 1.0\n"
14 "Content-Type: text/plain; charset=UTF-8\n"
15 "Content-Transfer-Encoding: 8bit\n"
16 "Plural-Forms: nplurals=1; plural=0;\n"
17
18 msgid "Execution example::"
19 msgstr "実行例::"
20
21 msgid "``logical_count``"
22 msgstr ""
23
24 msgid "Summary"
25 msgstr "概要"
26
27 msgid "``logical_count`` is a command that has only count feature in :doc:`logical_select`. :doc:`logical_select` searches records from multiple tables, outputs the number of matched records, outputs columns of the matched records and so on. ``logical_count`` only searches records from multiple tables and output the number of matched records."
28 msgstr "``logical_count`` は :doc:`logical_select` の件数カウント機能だけを提供するコマンドです。 :doc:`logical_select` は複数のテーブルからレコードを検索し、マッチしたレコード数を出力し、マッチしたレコードのカラムを出力し、他にもいろいろします。 ``logical_count`` は複数のテーブルからレコードを検索し、マッチしたレコード数を出力するだけです。"
29
30 msgid "``logical_count`` is useful when you just want the number of matched records. You can use ``logical_count`` and :doc:`logical_range_filter` at once. You can show the first N matched records before you get the number of matched records. If you use only :doc:`logical_select`, you need to wait finishing all search."
31 msgstr "``logical_count`` はマッチしたレコードの数だけを知りたいときに便利です。 ``logical_count`` と :doc:`logical_range_filter` を一緒に使えます。一緒に使うと、マッチしたレコード数を取得する前に、マッチしたレコードのうち先頭のNレコードだけを先に表示できます。 :doc:`logical_select` だけを使っている場合は、すべての検索処理が終わるまで待たなければいけません。"
32
33 msgid "You need to :doc:`plugin_register` ``sharding`` plugin because this command is included in ``sharding`` plugin."
34 msgstr "このコマンド は ``sharding`` プラグインに含まれているので、 ``sharding`` プラグインを :doc:`plugin_register` する必要があります。"
35
36 msgid "Syntax"
37 msgstr "構文"
38
39 msgid "This command takes many parameters."
40 msgstr "このコマンドにはたくさんの引数があります。"
41
42 msgid "The required parameters are ``logical_table`` and ``shard_key``. Other parameters are optional::"
43 msgstr "必須の引数は ``logical_table`` と ``shard_key`` です。それ以外の引数は省略可能です::"
44
45 msgid "There are some parameters that can be only used as named parameters. You can't use these parameters as ordered parameters. You must specify parameter name."
46 msgstr "いくつか名前付き引数としてしか使えない引数があります。これらの引数を「○番目の引数」として使うことはできません。必ず名前を指定する必要があります。"
47
48 msgid "Here are parameters that can be only used as named parameters:"
49 msgstr "名前付き引数としてしか使えない引数は次の通りです。"
50
51 msgid "``cache=no``"
52 msgstr ""
53
54 msgid "This command has the following named parameters for dynamic columns:"
55 msgstr "以下の名前付き引数で動的カラム機能を使うことができます。"
56
57 msgid "``columns[${NAME}].stage=null``"
58 msgstr ""
59
60 msgid "``columns[${NAME}].flags=COLUMN_SCALAR``"
61 msgstr ""
62
63 msgid "``columns[${NAME}].type=null``"
64 msgstr ""
65
66 msgid "``columns[${NAME}].value=null``"
67 msgstr ""
68
69 msgid "``columns[${NAME}].window.sort_keys=null``"
70 msgstr ""
71
72 msgid "``columns[${NAME}].window.group_keys=null``"
73 msgstr ""
74
75 msgid "You can use one or more alphabets, digits, ``_`` for ``${NAME}``. For example, ``column1`` is a valid ``${NAME}``. This is the same rule as normal column. See also :ref:`column-create-name`."
76 msgstr "``${NAME}`` には1つ以上のアルファベット、数字、 ``_`` を使うことができます。たとえば、 ``column1`` は有効な ``${NAME}`` です。これは通常のカラムと同じルールです。 :ref:`column-create-name` も見てください。"
77
78 msgid "Parameters that have the same ``${NAME}`` are grouped."
79 msgstr "同じ ``${NAME}`` も持つ引数は同じグループになります。"
80
81 msgid "For example, the following parameters specify one dynamic column:"
82 msgstr "たとえば、以下の引数は1つの動的カラムを指定しています。"
83
84 msgid "``--columns[name].stage initial``"
85 msgstr ""
86
87 msgid "``--columns[name].type UInt32``"
88 msgstr ""
89
90 msgid "``--columns[name].value 29``"
91 msgstr ""
92
93 msgid "The following parameters specify two dynamic columns:"
94 msgstr "以下の引数は2つの動的カラムを指定しています。"
95
96 msgid "``--columns[name1].stage initial``"
97 msgstr ""
98
99 msgid "``--columns[name1].type UInt32``"
100 msgstr ""
101
102 msgid "``--columns[name1].value 29``"
103 msgstr ""
104
105 msgid "``--columns[name2].stage initial``"
106 msgstr ""
107
108 msgid "``--columns[name2].type Float``"
109 msgstr ""
110
111 msgid "``--columns[name2].value '_score * 0.1'``"
112 msgstr ""
113
114 msgid "Usage"
115 msgstr "使い方"
116
117 msgid "Let's learn about usage with examples. This section shows many popular usages."
118 msgstr "例を使いながら使い方を学びましょう。このセクションではよく使われる使い方を紹介します。"
119
120 msgid "You need to register ``sharding`` plugin because this command is included in ``sharding`` plugin."
121 msgstr "このコマンドは ``sharding`` プラグインに含まれているので ``sharding`` プラグインを登録する必要があります。"
122
123 msgid "Note that ``logical_count`` is implemented as an experimental plugin, and the specification may be changed in the future."
124 msgstr "``logical_count`` コマンドは実験的なプラグインです。このコマンドは将来的に変更されるかもしれません。"
125
126 msgid "Here is the simple example which shows how to use this feature. Let's consider to count specified logs which are stored into multiple tables."
127 msgstr "この機能を使う簡単な例を示します。複数のテーブルに保存されている特定のログをカウントしてみましょう。"
128
129 msgid "Here are a schema definition and sample data to show usage."
130 msgstr "使い方を示すために使うスキーマ定義とサンプルデータは以下の通りです。"
131
132 msgid "There are two tables, ``Entries_20150708`` and ``Entries_20150709``, for blog entries."
133 msgstr "ブログエントリー用に ``Entries_20150708`` と ``Entries_20150709`` の2つのテーブルがあります。"
134
135 msgid "You need to use ``${LOGICAL_TABLE_NAME}_${YYYYMMDD}`` naming rule for table names. In this example, ``LOGICAL_TABLE_NAME`` is ``Entries`` and ``YYYYMMDD`` is ``20150708`` or ``20150709``."
136 msgstr "テーブル名には ``${論理テーブル名}_${YYYYMMDD}`` という命名規則を使う必要があります。この例では、 ``論理テーブル名`` は ``Entries`` で ``YYYYMMDD`` は ``20150708`` または ``20150709`` です。"
137
138 msgid "An entry has title, created time, content, the number of likes for the entry and tag. Title is key of ``Entries_YYYYMMDD``. Created time is value of ``Entries_YYYYMMDD.created_at`` column. Content is value of ``Entries_YYYYMMDD.content`` column. The number of likes is value of ``Entries_YYYYMMDD.n_likes`` column. Tag is value of ``Entries_YYYYMMDD.tag`` column."
139 msgstr "各エントリはタイトルと作成日時と内容と「いいね!」数、タグを持っています。タイトルは ``Entries_YYYYMMDD`` のキーとします。作成日時は ``Entries_YYYYMMDD.created_at`` カラムの値とします。内容は ``Entries_YYYYMMDD.content`` カラムの値とします。「いいね!」数は ``Entries_YYYYMMDD.n_likes`` カラムの値とします。タグは ``Entries_YYYYMMDD.tag`` カラムの値とします。"
140
141 msgid "``Entries_YYYYMMDD._key`` column and ``Entries_YYYYMMDD.content`` column are indexed using ``TokenBigram`` tokenizer. So both ``Entries_YYYYMMDD._key`` and ``Entries_YYYYMMDD.content`` are fulltext search ready."
142 msgstr "``Entries_YYYYMMDD._key`` カラムと ``Entries_YYYYMMDD.content`` カラムには ``TokenBigram`` トークナイザーを使ったインデックスを作成します。そのため、 ``Entries_YYYYMMDD._key`` と ``Entries_YYYYMMDD.content`` は両方とも全文検索できます。"
143
144 msgid "OK. The schema and data for examples are ready."
145 msgstr "これで例を示すためのスキーマとデータの準備ができました。"
146
147 msgid "Here is an example to count the number of records which have ``Groonga`` or ``Senna`` in ``content`` column. ``logical_count`` searches records over all ``Entries_YYYYMMDD`` tables."
148 msgstr "以下は ``content`` カラムに ``Groonga`` または ``Senna`` を含むレコード数を数える例です。 ``logical_count`` はすべての ``Entries_YYYYMMDD`` テーブルを検索します。"
149
150 msgid "Here are matched records:"
151 msgstr "マッチしたレコードは次の通りです。"
152
153 msgid "``_key:\"Groonga\"`` in ``Entries_20150708``"
154 msgstr "``Entries_20150708`` の中の ``_key:\"Groonga\"``"
155
156 msgid "``_key:\"Good-bye Senna\"`` in ``Entries_20150709``"
157 msgstr "``Entries_20150709`` の中の ``_key:\"Good-bye Senna\"``"
158
159 msgid "Parameters"
160 msgstr "引数"
161
162 msgid "This section describes parameters of this command."
163 msgstr "このセクションではこのコマンドのパラメーターを説明します。"
164
165 msgid "Required parameters"
166 msgstr "必須引数"
167
168 msgid "There are required parameters, ``logical_table`` and ``shard_key``."
169 msgstr "必須引数は二つあります。 ``logical_table`` と ``shard_key`` です。"
170
171 msgid "``logical_table``"
172 msgstr ""
173
174 msgid "Specifies logical table name. It means table name without ``_YYYYMMDD`` postfix. If you use actual table such as ``Logs_20150203``, ``Logs_20150203`` and so on, logical table name is ``Logs``."
175 msgstr "論理テーブル名を指定します。これは ``_YYYYMMDD`` をテーブル名から除いたものです。実際のテーブルが ``Logs_20150203`` や ``Logs_20150203`` といったものなら、論理テーブル名は ``Logs`` です。"
176
177 msgid "You can count all records by specifying only ``logical_table`` and ``shard_key`` parameters. They are required parameters."
178 msgstr "``logical_table`` と ``shard_key`` だけを指定すると全レコード数をカウントできます。これらの引数は必須の引数です。"
179
180 msgid "If nonexistent table is specified, an error is returned."
181 msgstr "存在しないテーブルを指定するとエラーが返ります。"
182
183 msgid "``shard_key``"
184 msgstr ""
185
186 msgid "Specifies column name which is treated as shared key. Shard key is a column that stores data that is used for distributing records to suitable shards."
187 msgstr "シャードキーとして使うカラム名を指定します。シャードキーは適切なシャードへレコードを分配するために使う値を保存しているカラムです。"
188
189 msgid "Shard key must be ``Time`` type for now."
190 msgstr "今のところ、シャードキーは ``Time`` 型でなければいけません。"
191
192 msgid "See :ref:`logical-count-logical-table` how to specify ``shard_key``."
193 msgstr "``shard_key`` の指定方法は :ref:`logical-count-logical-table` を見てください。"
194
195 msgid "Optional parameters"
196 msgstr "省略可能引数"
197
198 msgid "There are optional parameters."
199 msgstr "いくつか省略可能な引数があります。"
200
201 msgid "``min``"
202 msgstr ""
203
204 msgid "Specifies the minimum value of ``shard_key`` column. If shard doesn't have any matched records, the shard isn't searched."
205 msgstr "``shard_key`` カラムの最小値を指定します。シャードにマッチするレコードがない場合は、そのシャードは検索対象外になります。"
206
207 msgid "For example, ``min`` is ``\"2015/07/09 00:00:00\"``, ``Entry_20150708`` isn't searched. Because ``Entry_20150708`` has only records for ``\"2015/07/08\"``."
208 msgstr "たとえば、 ``min`` が ``\"2015/07/09 00:00:00\"`` なら、 ``Entry_20150708`` は検索対象外です。なぜなら、 ``Entry_20150708`` は ``\"2015/07/08\"`` のレコードしかないからです。"
209
210 msgid "The following example only uses ``Entry_20150709`` table. ``Entry_20150708`` isn't used."
211 msgstr "以下の例は ``Entry_20150709`` テーブルだけを使う例です。 ``Entry_20150708`` は使われません。"
212
213 msgid "``min_border``"
214 msgstr ""
215
216 msgid "Specifies whether the minimum value is included or not. Here is available values."
217 msgstr "最小値を含めるかどうかを指定します。指定可能な値は次の通りです。"
218
219 msgid "Value"
220 msgstr "値"
221
222 msgid "Description"
223 msgstr "説明"
224
225 msgid "``include``"
226 msgstr ""
227
228 msgid "Includes ``min`` value. This is the default."
229 msgstr "``min`` の値を含みます。これがデフォルト値です。"
230
231 msgid "``exclude``"
232 msgstr ""
233
234 msgid "Doesn't include ``min`` value."
235 msgstr "``min`` の値を含みません。"
236
237 msgid "Here is an example for ``exclude``. The result doesn't include the ``\"Good-bye Senna\"`` record because its ``created_at`` value is ``\"2015/07/09 00:00:00\"``."
238 msgstr "次の例は ``exclude`` の使用例です。結果には ``\"Good-bye Senna\"`` レコードは含まれません。このレコードの ``created_at`` の値が ``\"2015/07/09 00:00:00\"`` だからです。"
239
240 msgid "``max``"
241 msgstr ""
242
243 msgid "Specifies the maximum value of ``shard_key`` column. If shard doesn't have any matched records, the shard isn't searched."
244 msgstr "``shard_key`` カラムの最大値を指定します。シャードにマッチするレコードがない場合、そのシャードは検索対象外になります。"
245
246 msgid "For example, ``max`` is ``\"2015/07/08 23:59:59\"``, ``Entry_20150709`` isn't searched. Because ``Entry_20150709`` has only records for ``\"\"2015/07/09\"``."
247 msgstr "たとえば、 ``max`` が ``\"2015/07/08 23:59:59\"`` なら ``Entry_20150709`` は検索対象外です。なぜなら ``Entry_20150709`` には ``\"\"2015/07/09\"`` のレコードしかないからです。"
248
249 msgid "The following example only uses ``Entry_20150708`` table. ``Entry_20150709`` isn't used."
250 msgstr "以下の例は ``Entry_20150708`` テーブルだけを使います。 ``Entry_20150709`` は使いません。"
251
252 msgid "``max_border``"
253 msgstr ""
254
255 msgid "Specifies whether the maximum value is included or not. Here is available values."
256 msgstr "最大値を含めるかどうかを指定します。指定可能な値は次の通りです。"
257
258 msgid "Includes ``max`` value. This is the default."
259 msgstr "``max`` の値を含みます。これがデフォルト値です。"
260
261 msgid "Doesn't include ``max`` value."
262 msgstr "``max`` の値を含みません。"
263
264 msgid "Search related parameters"
265 msgstr "検索関係の引数"
266
267 msgid "This command provides :doc:`select` compatible search related parameters."
268 msgstr "このコマンドは :doc:`select` 互換の検索関連パラメーターをサポートしています。"
269
270 msgid "``filter``"
271 msgstr ""
272
273 msgid "Corresponds to :ref:`select-filter` in :doc:`select`. See :ref:`select-filter` for details."
274 msgstr ":doc:`select` の :ref:`select-filter` に対応しています。詳細は :ref:`select-filter` を見てください。"
275
276 msgid "Here is an example:"
277 msgstr "以下は例です。"
278
279 msgid "``post_filter``"
280 msgstr ""
281
282 msgid "Specifies the filter text that is processed after ``filtered`` stage dynamic columns are generated. You can use ``post_filter`` to filter by ``filtered`` stage dynamic columns. Others are the same as :ref:`select-filter`."
283 msgstr "``filtered`` ステージの動的カラムが生成されてから実行するフィルターを指定します。 ``post_filter`` を使うと ``filtered`` ステージの動的カラムを使って絞り込むことができます。他は :ref:`select-filter` と同じです。"
284
285 msgid "Here is an example that shows entries only in popular tag. All target entries have ``system`` or ``use`` words:"
286 msgstr "以下は人気のあるタグのエントリーだけを表示する例です。対象となるすべてのエントリーには ``system`` または ``use`` という単語が含まれています。"
287
288 msgid "Dynamic column related parameters"
289 msgstr "動的カラム関連の引数"
290
291 msgid "All dynamic column related parameters in :doc:`select` are supported. See :ref:`select-dynamic-column-related-parameters` for details."
292 msgstr ":doc:`select` のすべての動的カラム関連パラメーターをサポートしています。詳細は :ref:`select-dynamic-column-related-parameters` を見てください。"
293
294 msgid "``columns[${NAME}].stage``"
295 msgstr ""
296
297 msgid "Corresponds to :ref:`select-columns-name-stage` in :doc:`select`. See :ref:`select-columns-name-stage` for details."
298 msgstr ":doc:`select` の :ref:`select-columns-name-stage` に対応しています。詳細は :ref:`select-columns-name-stage` を見てください。"
299
300 msgid "This is a required parameter."
301 msgstr "必須の引数です。"
302
303 msgid "``initial`` stage and ``filtered`` stage are valid. Because there are no processes after ``output`` stages."
304 msgstr "``initial`` ステージと ``filtered`` ステージが有効です。なぜなら ``output`` ステージ以降にはなにも処理がないからです。"
305
306 msgid "``filtered`` stage is valid since 8.0.1."
307 msgstr "``filtered`` ステージは8.0.1から使えます。"
308
309 msgid "Here is an example that creates ``is_popular`` column at ``initial`` stage. You can use ``is_popular`` in all parameters such as ``filter``:"
310 msgstr "以下は ``initial`` ステージで ``is_popular`` カラムを作る例です。作成した ``is_popular`` カラムは ``filter`` を含むすべてのパラメーターで使えます。"
311
312 msgid "``columns[${NAME}].flags``"
313 msgstr ""
314
315 msgid "Corresponds to :ref:`select-columns-name-flags` in :doc:`select`. See :ref:`select-columns-name-flags` for details."
316 msgstr ":doc:`select` の :ref:`select-columns-name-flags` に対応しています。詳細は :ref:`select-columns-name-flags` を見てください。"
317
318 msgid "The default value is ``COLUMN_SCALAR``."
319 msgstr "デフォルト値は ``COLUMN_SCALAR`` です。"
320
321 msgid "Here is an example that creates a vector column by ``COLUMN_VECTOR`` flags. ``plugin_register functions/vector`` is for using :doc:`/reference/functions/vector_new` function:"
322 msgstr "以下は ``COLUMN_VECTOR`` フラグを指定してベクターカラムを作る例です。 ``plugin_register functions/vector`` は :doc:`/reference/functions/vector_new` 関数を使うために実行しています。:"
323
324 msgid "``columns[${NAME}].type``"
325 msgstr ""
326
327 msgid "Corresponds to :ref:`select-columns-name-type` in :doc:`select`. See :ref:`select-columns-name-type` for details."
328 msgstr ":doc:`select` の :ref:`select-columns-name-type` に対応しています。詳細は :ref:`select-columns-name-type` を見てください。"
329
330 msgid "Here is an example that creates a ``ShortText`` type column. Stored value is casted to ``ShortText`` automatically. In this example, number is casted to ``ShortText``:"
331 msgstr "以下は ``ShortText`` 型のカラムを作る例です。保存された値は自動的に ``ShortText`` にキャストされます。この例では数値が ``ShortText`` にキャストされています。"
332
333 msgid "``columns[${NAME}].value``"
334 msgstr ""
335
336 msgid "Corresponds to :ref:`select-columns-name-value` in :doc:`select`. See :ref:`select-columns-name-value` for details."
337 msgstr ":doc:`select` の :ref:`select-columns-name-value` に対応しています。詳細は :ref:`select-columns-name-value` を見てください。"
338
339 msgid "You need to specify :doc:`/reference/window_function` as ``value`` value and other window function related parameters when you use window function. See :ref:`logical-count-window-function-related-parameters` for details."
340 msgstr "ウィンドウ関数を使う場合は、 ``value`` の値に :doc:`/reference/window_function` を指定し、さらに他のウィンドウ関数関連のパラメーターも指定する必要があります。詳細は :ref:`logical-count-window-function-related-parameters` を見てください。"
341
342 msgid "Here is an example that creates a new dynamic column that stores the number of characters of content. This example uses :doc:`/reference/functions/string_length` function in ``functions/string`` plugin to compute the number of characters in a string. :doc:`plugin_register` is used to register ``functions/string`` plugin:"
343 msgstr "以下は内容の文字数を格納するための動的カラムを1つ作る例です。この例では文字数を数えるために ``functions/string`` プラグイン内の :doc:`/reference/functions/string_length` 関数を使っています。 ``functions/string`` プラグインを登録するために :doc:`plugin_register` を使っています。"
344
345 msgid "Window function related parameters"
346 msgstr "ウィンドウ関数関連の引数"
347
348 msgid "All window function related parameters in :doc:`select` are supported. See :ref:`select-window-function-related-parameters` for details."
349 msgstr ":doc:`select` のすべてのウィンドウ関数関連パラメーターをサポートしています。詳細は :ref:`select-window-function-related-parameters` を見てください。"
350
351 msgid "Window function over multiple tables aren't supported version 9.0.1 or before. Groonga supported it since version 9.0.2 or later. However, we need to align the same order for shard key and leading group key or sort key."
352 msgstr "バージョン9.0.1以前では、複数のテーブルをまたがったウィンドウ関数はサポートしていません。バージョン9.0.2以降ではサポートしていますが、先頭のグループキーまたは、ソートキーがシャードキーと同じ順序で並んでいる必要があります。"
353
354 msgid "For example, we can apply the window function to over multiple tables as below case. Because the below example aligns the same order for shard key and leading group key."
355 msgstr "例えば、以下のようなケースでは、複数のテーブルをまたいでウインドウ関数を適用できます。以下の例では、先頭のグループキーがシャードキーと同じ順序で並んでいるからです。"
356
357 msgid "The leading group key is ``price`` and shard key is ``timestamp`` in the below example. We can apply the window function to over multiple tables in the below example. Because ``price`` and ``timestamp`` aligns the same order."
358 msgstr "以下の例では、先頭のグループキーは ``price`` でシャードキーは ``timestamp`` です。 ``price`` と ``timestamp`` は同じ順序で並んでいるため、複数のテーブルをまたいでウインドウ関数を適用できます。"
359
360 msgid "``columns[${NAME}].window.sort_keys``"
361 msgstr ""
362
363 msgid "Corresponds to :ref:`select-columns-name-window-sort-keys` in :doc:`select`. See :ref:`select-columns-name-window-sort-keys` for details."
364 msgstr ":doc:`select` の :ref:`select-columns-name-window-sort-keys` に対応しています。詳細は :ref:`select-columns-name-window-sort-keys` を見てください。"
365
366 msgid "You must specify :ref:`logical-count-columns-name-window-sort-keys` or :ref:`logical-count-columns-name-window-group-keys` to use window function."
367 msgstr "ウィンドウ関数を使うには :ref:`logical-count-columns-name-window-sort-keys` または :ref:`logical-count-columns-name-window-group-keys` を指定しなければいけません。"
368
369 msgid "Here is an example that computes cumulative sum per ``Entries.tag``. Each group is sorted by ``Entries._key``:"
370 msgstr "以下は ``Entries.tag`` 毎に累積和を計算する例です。各グループ内のレコードは ``Entries._key`` でソートします。"
371
372 msgid "``columns[${NAME}].window.group_keys``"
373 msgstr ""
374
375 msgid "Corresponds to :ref:`select-columns-name-window-group-keys` in :doc:`select`. See :ref:`select-columns-name-window-group-keys` for details."
376 msgstr ":doc:`select` の :ref:`select-columns-name-window-group-keys` に対応しています。詳細は :ref:`select-columns-name-window-group-keys` を見てください。"
377
378 msgid "Here is an example that computes sum per ``Entries.tag``:"
379 msgstr "以下は ``Entries.tag`` 毎に合計を計算する例です。"
380
381 msgid "Cache related parameter"
382 msgstr "キャッシュ関連の引数"
383
384 msgid "``cache``"
385 msgstr ""
386
387 msgid "Specifies whether caching the result of this query or not."
388 msgstr "このクエリーの結果をキャッシュするかどうかを指定します。"
389
390 msgid "If the result of this query is cached, the next same query returns response quickly by using the cache."
391 msgstr "このクエリーの結果がキャッシュしてあると、次に同じクエリーを実行するときはキャッシュを使って高速にレスポンスを返すことができます。"
392
393 msgid "It doesn't control whether existing cached result is used or not."
394 msgstr "これは既存のキャッシュされた結果を使うかどうかを指定するものではありません。"
395
396 msgid "Here are available values:"
397 msgstr "指定可能な値は以下の通りです。"
398
399 msgid "``no``"
400 msgstr ""
401
402 msgid "Don't cache the output of this query."
403 msgstr "このクエリーの出力をキャッシュしない。"
404
405 msgid "``yes``"
406 msgstr ""
407
408 msgid "Cache the output of this query. It's the default value."
409 msgstr "このクエリーの出力をキャッシュする。デフォルト値。"
410
411 msgid "Here is an example to disable caching the result of this query:"
412 msgstr "このクエリーの結果をキャッシュしないようにする例です。"
413
414 msgid "The default value is ``yes``."
415 msgstr "デフォルト値は ``yes`` です。"
416
417 msgid "Return value"
418 msgstr "戻り値"
419
420 msgid "The command returns a response with the following format::"
421 msgstr "このコマンドは以下のフォーマットのレスポンスを返します。::"
422
423 msgid "If the command fails, error details are in ``HEADER``."
424 msgstr "このコマンドが失敗すると、 ``HEADER`` にエラーの詳細が含まれます。"
425
426 msgid "See :doc:`/reference/command/output_format` for ``HEADER``."
427 msgstr "``HEADER`` については :doc:`/reference/command/output_format` を参照してください。"
428
429 msgid "``N_HITS`` is the number of matched records."
430 msgstr "``N_HITS`` はマッチしたレコード数です。"