Debian Codegraph @

UG9/ja/upgrading.po

raw
1 # SOME DESCRIPTIVE TITLE
2 # Copyright (C) YEAR Free Software Foundation, Inc.
3 # This file is distributed under the same license as the PACKAGE package.
4 # FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
5 #
6 msgid ""
7 msgstr ""
8 "Project-Id-Version: PACKAGE VERSION\n"
9 "POT-Creation-Date: 2022-01-06 13:52+0900\n"
10 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
11 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
12 "Language-Team: LANGUAGE <[email protected]>\n"
13 "Language: \n"
14 "MIME-Version: 1.0\n"
15 "Content-Type: text/plain; charset=UTF-8\n"
16 "Content-Transfer-Encoding: 8bit\n"
17
18 #. type: Title ===
19 #, no-wrap
20 msgid "Upgrading DRBD"
21 msgstr "DRBDのアップグレード"
22
23 #. type: Plain text
24 msgid ""
25 "Upgrading DRBD is a fairly simple process. This section will cover the "
26 "process of upgrading from 8.4.x to 9.0.x in great detail; for within-9 "
27 "upgrades it gets to be much easier, see the short version <<s-upgrade-"
28 "within-9,below>>."
29 msgstr ""
30 "DRBDのアップグレードは非常にシンプルな手順です。この章ではDRBD8.4から9.0への"
31 "アップグレード手順を説明します。DRBD9系内でのアップグレードの手順についてはよ"
32 "り簡単ですので<<s-upgrade-within-9,以下>>の項目を参照ください。"
33
34 #. type: Title ====
35 #, no-wrap
36 msgid "Compatibility"
37 msgstr "互換性"
38
39 #. type: Plain text
40 msgid ""
41 "DRBD is _wire protocol_ compatible over minor versions. Its _wire protocol_ "
42 "is independent of the host kernel version and the machines' CPU "
43 "architectures."
44 msgstr ""
45 "DRBD は、マイナーバージョン間でワイヤプロトコル互換です。これはホストのカーネ"
46 "ルのバージョンやマシンの CPU アーキテクチャに依存しません。"
47
48 #. type: Plain text
49 msgid ""
50 "DRBD is protocol compatible within a major number. E.g. All version 8.x.y "
51 "releases are protocol compatible."
52 msgstr ""
53 "DRBD は、メジャーバージョン間でプロトコル互換です。たとえば、すべてのバージョ"
54 "ン 8.x.y リリース間はプロトコル互換です。"
55
56 #. type: Plain text
57 msgid ""
58 "DRBD 9.0.x is compatible with all drbd-8.x.y releases. DRBD 9.1.x is "
59 "compatible with all drbd-9.0.x releases but no longer with drbd-8.x.y."
60 msgstr ""
61 "DRBD 9.0.x は、すべての drbd-8.x.y リリースと互換性があります。DRBD 9.1.x "
62 "は、すべての drbd-9.0.x リリースと互換性がありますが、drbd-8.x.y とは互換性が"
63 "ありません。"
64
65 #. type: Title ====
66 #, no-wrap
67 msgid "General overview"
68 msgstr "概要"
69
70 #. type: Plain text
71 msgid "The general process for upgrading 8.4 to 9.0 is as follows:"
72 msgstr "8.4から9.0へのアップグレード手順の概要は以下の通りです。"
73
74 #. type: Plain text
75 msgid ""
76 "Configure the <<s-updating-your-repo,new repositories>> (if using packages "
77 "from LINBIT)"
78 msgstr ""
79 "<<s-updating-your-repo,新しいリポジトリ>>を設定する。(LINBITのパッケージを"
80 "使っている場合)"
81
82 #. type: Plain text
83 msgid "Make sure that the current situation <<s-upgrade-check,is okay>>"
84 msgstr "現在の状態が<<s-upgrade-check,問題ない>>事を確認する。"
85
86 #. type: Plain text
87 msgid "<<s-upgrade-pausing-the-cluster,Pause>> any cluster manager"
88 msgstr "クラスタ管理ソフトを<<s-upgrade-pausing-the-cluster,停止>>する。"
89
90 #. type: Plain text
91 msgid "Get <<s-Upgrading-the-packages,new versions>> installed"
92 msgstr "<<s-Upgrading-the-packages,新しいバージョン>>をインストールする。"
93
94 #. type: Plain text
95 msgid ""
96 "If wanting to move to more than 2 nodes, then you'll need to resize the "
97 "lower-level storage to provide room for the additional meta-data; this topic "
98 "is discussed in the <<ch-lvm,LVM Chapter>>."
99 msgstr ""
100 "2ノード以上を移動させたい場合は、追加メタデータ用のスペースを加えるために下位"
101 "レベルデバイスをリサイズする必要がある。この点については<<ch-lvm,LVMの章>>参"
102 "照。"
103
104 #. type: Plain text
105 msgid ""
106 "Deconfigure resources, unload DRBD 8.4, and <<s-upgrade-reload-kernel-mod,"
107 "load the v9 kernel module>>"
108 msgstr ""
109 "リソースの設定を取り除き、DRBD8.4をアンロードし、そして<<s-upgrade-reload-"
110 "kernel-mod,v9のカーネルモジュールをロード>>する。"
111
112 #. type: Plain text
113 msgid ""
114 "<<s-upgrade-convert,Convert DRBD meta-data>> to format `v09`, perhaps "
115 "changing the number of bitmaps in the same step"
116 msgstr ""
117 "`v09` の形式に<<s-upgrade-convert,DRBDメタデータをコンバート>>する。ビット"
118 "マップ数も同様の手順。"
119
120 #. type: Plain text
121 msgid "Take the DRBD <<s-upgrade-start-drbd,resources up>>, and be happy"
122 msgstr "<<s-upgrade-start-drbd,リソースを起動>>をして完了。"
123
124 #. type: Title ====
125 #, no-wrap
126 msgid "Updating your repository"
127 msgstr "リポジトリのアップデート"
128
129 #. type: Plain text
130 msgid ""
131 "Due to the number of changes between the 8.4 and 9.0 branches we have "
132 "created separate repositories for each. Perform this repository update on "
133 "both servers."
134 msgstr ""
135 "8.4と9.0のブランチ間の様々な変更のため、各々に別のリポジトリを作成していま"
136 "す。各サーバでリポジトリのアップデートを行います。"
137
138 #. type: Title =====
139 #, no-wrap
140 msgid "RHEL/CentOS systems"
141 msgstr "RHEL/CentOSのシステム"
142
143 #. type: Plain text
144 msgid ""
145 "Edit your `/etc/yum.repos.d/linbit.repo` file to reflect the following "
146 "changes."
147 msgstr "`/etc/yum.repos.d/linbit.repo` ファイルに以下の変更を反映します。"
148
149 #. type: delimited block -
150 #, no-wrap
151 msgid ""
152 "[drbd-9.0]\n"
153 "name=DRBD 9.0\n"
154 "baseurl=http://packages.linbit.com/<hash>/yum/rhel7/drbd-9.0/<arch>\n"
155 "gpgcheck=0\n"
156 msgstr ""
157 "[drbd-9.0]\n"
158 "name=DRBD 9.0\n"
159 "baseurl=http://packages.linbit.com/<hash>/yum/rhel7/drbd-9.0/<arch>\n"
160 "gpgcheck=0\n"
161
162 #. type: Plain text
163 msgid ""
164 "You will have to populate the <hash> and <arch> variables. The <hash> is "
165 "provided by LINBIT support services."
166 msgstr ""
167 "<hash>と<arch>の箇所は置き換えてください。<hash>はLINBITサポートから提供され"
168 "るものです。"
169
170 #. type: Plain text
171 msgid "Edit your `*.repo` file to reflect the necessary changes."
172 msgstr "`*.repo` ファイルに以下の変更を反映します。"
173
174 #. type: Title =====
175 #, no-wrap
176 msgid "Debian/Ubuntu systems"
177 msgstr "Debian/Ubuntuのシステム"
178
179 #. type: Plain text
180 msgid ""
181 "Edit `/etc/apt/sources.list` (or a file in `/etc/apt/sources.d/`) to reflect "
182 "the following changes."
183 msgstr ""
184 "`/etc/apt/sources.list`(または `/etc/apt/sources.d/` にあるファイル)に以下の"
185 "変更を反映します。"
186
187 #. type: delimited block -
188 #, no-wrap
189 msgid "deb http://packages.linbit.com/<hash>/ bullseye drbd-9.0\n"
190 msgstr "deb http://packages.linbit.com/<hash>/ bullseye drbd-9.0\n"
191
192 #. type: Plain text
193 msgid ""
194 "In case you're not using the `bullseye` release, but some other, you'll need "
195 "to change that line."
196 msgstr ""
197 "`bullseye` リリースを使用していない場合でも、また他のリリースの場合でも、この"
198 "変更は必要です。"
199
200 #. type: Plain text
201 msgid ""
202 "You will have to populate the `<hash>` variable. The `<hash>` is provided by "
203 "LINBIT support services."
204 msgstr ""
205 "<hash>の箇所は置き換えてください。<hash>はLINBITサポートから提供されるもので"
206 "す。"
207
208 #. type: Plain text
209 msgid "Next you will want to add the DRBD signing key to your trusted keys."
210 msgstr "次にDRBDの署名キーを信頼済みキーに追加してもよいでしょう。"
211
212 #. type: delimited block -
213 #, no-wrap
214 msgid ""
215 "# gpg --keyserver subkeys.pgp.net --recv-keys 0x282B6E23\n"
216 "# gpg --export -a 282B6E23 | apt-key add -\n"
217 msgstr ""
218 "# gpg --keyserver subkeys.pgp.net --recv-keys 0x282B6E23\n"
219 "# gpg --export -a 282B6E23 | apt-key add -\n"
220
221 #. type: Plain text
222 msgid ""
223 "Edit `/etc/apt/sources.list` (or a file in `/etc/apt/sources.d/`) to reflect "
224 "the the necessary changes."
225 msgstr ""
226 "`/etc/apt/sources.list`(または `/etc/apt/sources.d/` にあるファイル)に以下の"
227 "変更を反映します。"
228
229 #. type: Plain text
230 msgid ""
231 "Lastly perform an `apt update` so Debian recognizes the updated repository."
232 msgstr "最後に `apt update` を実行してリポジトリのアップデートを認識させます。"
233
234 #. type: delimited block -
235 #, no-wrap
236 msgid "# apt update\n"
237 msgstr "# apt update\n"
238
239 #. type: Title ====
240 #, no-wrap
241 msgid "Checking the DRBD state"
242 msgstr "DRBDの状態を確認する"
243
244 #. type: Plain text
245 msgid ""
246 "Before you begin make sure your resources are in sync. The output of `cat /"
247 "proc/drbd` (which is only available _before_ 9.0) should show _UpToDate/"
248 "UpToDate_."
249 msgstr ""
250 "リソースが同期していることを確認します。`cat /proc/drbd` が `UpToDate/"
251 "UpToDate` を出力しています。(これは、DRBD8系 _以下_ でのみ有効です)"
252
253 #. type: delimited block -
254 #, no-wrap
255 msgid "bob# cat /proc/drbd\n"
256 msgstr "bob# cat /proc/drbd\n"
257
258 #. type: delimited block -
259 #, no-wrap
260 msgid ""
261 "version: 8.4.9-1 (api:1/proto:86-101)\n"
262 "GIT-hash: e081fb0570183db40caa29b26cb8ee907e9a7db3 build by linbit@buildsystem, 2016-11-18 14:49:21\n"
263 msgstr ""
264 "version: 8.4.9-1 (api:1/proto:86-101)\n"
265 "GIT-hash: e081fb0570183db40caa29b26cb8ee907e9a7db3 build by linbit@buildsystem, 2016-11-18 14:49:21\n"
266
267 #. type: delimited block -
268 #, no-wrap
269 msgid ""
270 " 0: cs:Connected ro:Secondary/Secondary ds:UpToDate/UpToDate C r-----\n"
271 " ns:0 nr:211852 dw:211852 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:d oos:0\n"
272 msgstr ""
273 " 0: cs:Connected ro:Secondary/Secondary ds:UpToDate/UpToDate C r-----\n"
274 " ns:0 nr:211852 dw:211852 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:d oos:0\n"
275
276 #. type: Title ====
277 #, no-wrap
278 msgid "Pausing the services"
279 msgstr "サービスの一時停止"
280
281 #. type: Plain text
282 msgid ""
283 "Now that you know the resources are in sync, start by upgrading the "
284 "secondary node. This can be done manually or according to your cluster "
285 "manager's documentation."
286 msgstr ""
287 "リソースが同期している事を確認したら、セカンダリノードをアップグレードしま"
288 "す。この手順は手動で行うことができます。またはクラスタマネージャのドキュメン"
289 "トに従って実行します。"
290
291 #. type: Plain text
292 msgid ""
293 "Both processes are covered below. If you're running Pacemaker do not use "
294 "the manual method."
295 msgstr ""
296 "両手順は以下の通りです。Pacemakerの動作中は手動では操作しないでください。"
297
298 #. type: Plain text
299 msgid "Manual Method"
300 msgstr "手動手順"
301
302 #. type: delimited block -
303 #, no-wrap
304 msgid "bob# systemctl stop [email protected]\n"
305 msgstr "bob# systemctl stop [email protected]\n"
306
307 #. type: Plain text
308 msgid "Pacemaker"
309 msgstr "Pacemaker"
310
311 #. type: Plain text
312 msgid ""
313 "Put the secondary node into standby mode. In this example 'bob' is secondary."
314 msgstr ""
315 "セカンダリノードをスタンバイモードにします。この例では `bob` はセカンダリで"
316 "す。"
317
318 #. type: delimited block -
319 #, no-wrap
320 msgid "bob# crm node standby bob\n"
321 msgstr "bob# crm node standby bob\n"
322
323 #. type: Plain text
324 msgid ""
325 "You can watch the status of your cluster using `crm_mon -rf` or watch `cat /"
326 "proc/drbd` until it shows _Unconfigured_ for your resources."
327 msgstr ""
328 "クラスタの状態を 'crm_mon -rf' で確認することができます。または、リソースの状"
329 "態を、もし \"Unconfigured\" と表示されていなければ 'cat /proc/drbd' で確認す"
330 "ることができます。"
331
332 #. type: Title ====
333 #, no-wrap
334 msgid "Upgrading the packages"
335 msgstr "パッケージのアップグレード"
336
337 #. type: Plain text
338 msgid "Now update your packages with either yum or apt."
339 msgstr "パッケージをyumまたはaptでアップデートします。"
340
341 #. type: delimited block -
342 #, no-wrap
343 msgid "bob# yum upgrade\n"
344 msgstr "bob# yum upgrade\n"
345
346 #. type: delimited block -
347 #, no-wrap
348 msgid "bob# apt upgrade\n"
349 msgstr "bob# apt upgrade\n"
350
351 #. type: Plain text
352 msgid ""
353 "Once the upgrade is finished will now have the latest DRBD 9.0 kernel module "
354 "and drbd-utils installed on your secondary node, 'bob'."
355 msgstr ""
356 "アップグレードが完了すると、最新のDRBD9のカーネルモジュールとdrbd-utilsがセカ"
357 "ンダリノードの `bob` にインストールされています。"
358
359 #. type: Plain text
360 msgid "But the kernel module is not active yet."
361 msgstr "しかしカーネルモジュールはまだ有効化されていません。"
362
363 #. type: Title ====
364 #, no-wrap
365 msgid "Loading the new Kernel module"
366 msgstr "新しいカーネルモジュールのロード"
367
368 #. type: Plain text
369 msgid ""
370 "By now the DRBD module should not be in use anymore, so we unload it via"
371 msgstr ""
372 "現時点でDRBDモジュールは使用していませんので、以下コマンドでアンロードしま"
373 "す。"
374
375 #. type: delimited block -
376 #, no-wrap
377 msgid "bob# rmmod drbd_transport_tcp; rmmod drbd\n"
378 msgstr "bob# rmmod drbd_transport_tcp; rmmod drbd\n"
379
380 #. type: Plain text
381 msgid ""
382 "If there's a message like `ERROR: Module drbd is in use`, then not all "
383 "resources have been correctly stopped yet. + Retry <<s-upgrading-drbd>>, and/"
384 "or run the command `drbdadm down all` to find out which resources are still "
385 "active."
386 msgstr ""
387 "\" `ERROR : Module drbd is in use` \" のようなメッセージが出る場合は、まだす"
388 "べてのリソースが正常に停止していません。<<s-upgrading-drbd>>を再実行し、そし"
389 "て/またはどのリソースがまだ稼働しているのか確認するため `drbdadm down all` を"
390 "実行します。"
391
392 #. type: Plain text
393 msgid "Typical issues that might prevent unloading are these:"
394 msgstr "よくあるアンロードを妨げる原因には以下のものがあります。"
395
396 #. type: Plain text
397 msgid "NFS export on a DRBD-backed filesystem (see `exportfs -v` output)"
398 msgstr ""
399 "DRBDが下位デバイスのファイルシステムにNFSエクスポートがある( `exportfs -v` の"
400 "出力を確認)"
401
402 #. type: Plain text
403 msgid "Filesystem still mounted - check `grep drbd /proc/mounts`"
404 msgstr "ファイルシステムをマウント中 - `grep drbd /proc/mounts` を確認"
405
406 #. type: Plain text
407 msgid "Loopback device active (`losetup -l`)"
408 msgstr "ループバックデバイスがアクティブ ( `losetup -l` )"
409
410 #. type: Plain text
411 msgid "Device mapper using DRBD, directly or indirectly (`dmsetup ls --tree`)"
412 msgstr ""
413 "デバイスマッパーが直接または間接的にDRBDを使用している。( `dmsetup ls --"
414 "tree` )"
415
416 #. type: Plain text
417 msgid "LVM with a DRBD-PV (`pvs`)"
418 msgstr ""
419 "DRBDデバイスが物理ボリュームとなっていて、そのLVMがアクティブ ( `pvs` )"
420
421 #. type: Plain text
422 msgid ""
423 "Please note that this list isn't complete - these are just the most common "
424 "examples."
425 msgstr ""
426 "上記はよくあるケースであり、すべてのケースを網羅するものではないという事に注"
427 "意ください。"
428
429 #. type: Plain text
430 msgid "Now we can load the new DRBD module:"
431 msgstr "これで、DRBDモジュールをロードすることができます。"
432
433 #. type: delimited block -
434 #, no-wrap
435 msgid "bob# modprobe drbd\n"
436 msgstr "bob# modprobe drbd\n"
437
438 #. type: Plain text
439 msgid ""
440 "Now you should check the contents of `/proc/drbd` and verify that the "
441 "correct (new) version is loaded; if the installed packages is for the wrong "
442 "kernel version, the `modprobe` would be successful, but you'd be left with "
443 "the old version being active again."
444 msgstr ""
445 "`/proc/drbd` の出力を確認し、正しく(新しい)バージョンがロードされたか確認して"
446 "ください。もしインストールされているパッケージが間違ったカーネルバージョンの"
447 "ものだった場合には、 `modprobe` は有効ですが、古いバージョンが残っていれば再"
448 "び有効にすることもできます。"
449
450 #. type: Plain text
451 msgid ""
452 "The output of `cat /proc/drbd` should now show 9.0.x and look similar to "
453 "this."
454 msgstr "'cat /proc/drbd' の出力は9.0.xを表示し、次のようになっているでしょう。"
455
456 #. type: delimited block -
457 #, no-wrap
458 msgid ""
459 "version: 9.0.0 (api:2/proto:86-110)\n"
460 "GIT-hash: 768965a7f158d966bd3bd4ff1014af7b3d9ff10c build by root@bob, 2015-09-03 13:58:02\n"
461 "Transports (api:10): tcp (1.0.0)\n"
462 msgstr ""
463 "version: 9.0.0 (api:2/proto:86-110)\n"
464 "GIT-hash: 768965a7f158d966bd3bd4ff1014af7b3d9ff10c build by root@bob, 2015-09-03 13:58:02\n"
465 "Transports (api:10): tcp (1.0.0)\n"
466
467 #. type: Plain text
468 msgid ""
469 "On the primary node, alice, 'cat /proc/drbd' will still show the prior "
470 "version, until you upgrade it."
471 msgstr ""
472 "プライマリノードのaliceでは、 'cat /proc/drbd' はアップグレードをするまでは以"
473 "前のバージョンを表示します。"
474
475 #. At this point the cluster is running two different versions of DRBD. While this
476 #. is not recommended to be used for longer time spans, it is inevitable for the (short) upgrade period.
477 #. Stop
478 #. any service using DRBD and then DRBD on the primary node, alice, and promote
479 #. 'bob'. Again this can be done either manually or via the Pacemaker shell.
480 #. * Manually
481 #. ----------------------------
482 #. alice # umount /dev/drbd/by-res/r0
483 #. alice # /etc/init.d/drbd stop
484 #. bob # drbdadm primary r0
485 #. bob # mount /dev/drbd/by-res/r0/0 /mnt/drbd
486 #. ----------------------------
487 #. Please note that the mount command now references '/0' which defines
488 #. the volume number of a resource. See <<s-recent-changes-volumes>> for
489 #. more information on the new volumes feature.
490 #. * Pacemaker
491 #. ----------------------------
492 #. # crm node standby alice
493 #. ----------------------------
494 #. WARNING: This will interrupt running services by stopping them and
495 #. migrating them to the secondary server, bob.
496 #. At this point you can safely upgrade DRBD by using yum or apt.
497 #. ----------------------------
498 #. alice# yum upgrade
499 #. ----------------------------
500 #. ----------------------------
501 #. alice# apt upgrade
502 #. ----------------------------
503 #. Once the upgrade is complete you will now have the latest version
504 #. of DRBD on alice and can start DRBD.
505 #. * Manually
506 #. ----------------------------
507 #. alice# /etc/init.d/drbd start
508 #. ----------------------------
509 #. * Pacemaker
510 #. ----------------------------
511 #. alice# crm node online alice
512 #. ----------------------------
513 #. NOTE: Services will still be located on bob and will remain there
514 #. until you migrate them back.
515 #. Both servers should now show the latest version of DRBD in a connected
516 #. state.
517 #. ----------------------------
518 #. # cat /proc/drbd
519 #. version: 9.0.0 (api:2/proto:86-110)
520 #. GIT-hash: 768965a7f158d966bd3bd4ff1014af7b3d9ff10c build by root@bob, 2015-09-03 13:58:02
521 #. Transports (api:10): tcp (1.0.0)
522 #. # drbdsetup status
523 #. r0 role:Secondary
524 #. disk:UpToDate
525 #. bob role:Secondary
526 #. peer-disk:UpToDate
527 #. ----------------------------
528 #. type: Title ====
529 #, no-wrap
530 msgid "Migrating your configuration files"
531 msgstr "設定ファイルの移行"
532
533 #. type: Plain text
534 msgid ""
535 "DRBD 9.0 is backward compatible with the 8.4 configuration files; however, "
536 "some syntax has changed. See <<s-recent-changes-config>> for a full list of "
537 "changes. In the meantime you can port your old configs fairly easily by "
538 "using 'drbdadm dump all' command. This will output both a new global config "
539 "followed by the new resource config files. Take this output and make changes "
540 "accordingly."
541 msgstr ""
542 "DRBD 9.0は8.4の設定ファイルに後方互換性がありますが、一部の構文は変更していま"
543 "す。変更点の全一覧は<<s-recent-changes-config>>を参照してください。'drbdadm "
544 "dump all' コマンドを使えば古い設定を簡単に移すことができます。これは、新しい"
545 "リソース設定ファイルに続いて新しいグローバル設定も両方とも出力します。この出"
546 "力を使って適宜変更してください。"
547
548 #. type: Title ====
549 #, no-wrap
550 msgid "Changing the meta-data"
551 msgstr "メタデータの変更 "
552
553 #. type: Plain text
554 msgid ""
555 "Now you need to convert the on-disk metadata to the new version; this is "
556 "really easy, it's just running one command and acknowledging two questions."
557 msgstr ""
558 "次にオンディスクのメタデータを新しいバージョンに変更します。この手順はとても"
559 "簡単で、1つコマンドを実行して2つの質問に答えるだけです。"
560
561 #. type: Plain text
562 msgid ""
563 "If you want to change the number of nodes, you should already have increased "
564 "the size of the lower level device, so that there is enough space to store "
565 "the additional bitmaps; in that case, you'd run the command below with an "
566 "additional argument `--max-peers=__<N>__`. When determining the number of "
567 "(possible) peers please take setups like the <<s-drbd-client>> into account."
568 msgstr ""
569 "たくさんのノードを変更したい場合には、追加のビットマップに十分なスペースを確"
570 "保するため、すでに下位デバイスの容量を拡張していることでしょう。この場合には"
571 "以下のコマンドを追加の引数 `--max-peers=<N>` を付けて実行します。対向ノードの"
572 "数(予定)を決める時には、<<s-drbd-client>>も考慮に入れてください。"
573
574 #. type: Plain text
575 msgid ""
576 "Upgrading the DRBD metadata is as easy as running one command, and "
577 "acknowledging the two questions:"
578 msgstr ""
579 "DRBDのメタデータのアップグレードはとても簡単で、1つコマンドを実行して2つの質"
580 "問に答えるだけです。"
581
582 #. type: delimited block -
583 #, no-wrap
584 msgid ""
585 "# drbdadm create-md <resource>\n"
586 "You want me to create a v09 style flexible-size internal meta data block.\n"
587 "There appears to be a v08 flexible-size internal meta data block\n"
588 "already in place on <disk> at byte offset <offset>\n"
589 msgstr ""
590 "# drbdadm create-md <resource>\n"
591 "You want me to create a v09 style flexible-size internal meta data block.\n"
592 "There appears to be a v08 flexible-size internal meta data block\n"
593 "already in place on <disk> at byte offset <offset>\n"
594
595 #. type: delimited block -
596 #, no-wrap
597 msgid ""
598 "Valid v08 meta-data found, convert to v09?\n"
599 "[need to type 'yes' to confirm] yes\n"
600 msgstr ""
601 "Valid v08 meta-data found, convert to v09?\n"
602 "[need to type 'yes' to confirm] yes\n"
603
604 #. type: delimited block -
605 #, no-wrap
606 msgid ""
607 "md_offset <offsets...>\n"
608 "al_offset <offsets...>\n"
609 "bm_offset <offsets...>\n"
610 msgstr ""
611 "md_offset <offsets...>\n"
612 "al_offset <offsets...>\n"
613 "bm_offset <offsets...>\n"
614
615 #. type: delimited block -
616 #, no-wrap
617 msgid "Found some data\n"
618 msgstr "Found some data\n"
619
620 #. type: delimited block -
621 #, no-wrap
622 msgid " ==> This might destroy existing data! <==\n"
623 msgstr " ==> This might destroy existing data! <==\n"
624
625 #. type: delimited block -
626 #, no-wrap
627 msgid ""
628 "Do you want to proceed?\n"
629 "[need to type 'yes' to confirm] yes\n"
630 msgstr ""
631 "Do you want to proceed?\n"
632 "[need to type 'yes' to confirm] yes\n"
633
634 #. type: delimited block -
635 #, no-wrap
636 msgid ""
637 "Writing meta data...\n"
638 "New drbd meta data block successfully created.\n"
639 "success\n"
640 msgstr ""
641 "Writing meta data...\n"
642 "New drbd meta data block successfully created.\n"
643 "success\n"
644
645 #. type: Plain text
646 msgid ""
647 "Of course, you can pass `all` for the resource names, too; and if you feel "
648 "really lucky, you can avoid the questions via a command line like this here, "
649 "too. (Yes, the order is important.)"
650 msgstr ""
651 "もちろん、リソース名を `all` にすることも可能です。また、以下のようにすれば質"
652 "問されるのを回避することができます(コマンド内の順序が重要です)。"
653
654 #. type: delimited block -
655 #, no-wrap
656 msgid "drbdadm -v --max-peers=<N> -- --force create-md <resources>\n"
657 msgstr "drbdadm -v --max-peers=<N> -- --force create-md <resources>\n"
658
659 #. type: Title ====
660 #, no-wrap
661 msgid "Starting DRBD again"
662 msgstr "DRBDを再び起動する"
663
664 #. type: Plain text
665 msgid ""
666 "Now, the only thing left to do is to get the DRBD devices up and running "
667 "again - a simple `drbdadm up all` should do the trick."
668 msgstr ""
669 "あとはDRBDデバイスを再びupにして起動するだけです。単純に、 `drbdadm up all` "
670 "で済みます。"
671
672 #. type: Plain text
673 msgid ""
674 "Now, depending on whether you've got a cluster manager or keep track of your "
675 "resources manually, there are two different ways again. If you are using a "
676 "cluster manager follow its documentation."
677 msgstr ""
678 "次は、クラスタ管理ソフトを使用しているか、手動でリソースを管理しているかに"
679 "よって方法が異なります。クラスタマネージャを使用している場合は、そのドキュメ"
680 "ントに従ってください。"
681
682 #. type: Plain text
683 msgid "Manually"
684 msgstr "手動"
685
686 #. type: delimited block -
687 #, no-wrap
688 msgid "bob# systemctl start [email protected]\n"
689 msgstr "bob# systemctl start [email protected]\n"
690
691 #. type: delimited block -
692 #, no-wrap
693 msgid "# crm node online bob\n"
694 msgstr "# crm node online bob\n"
695
696 #. type: Plain text
697 msgid ""
698 "This should make DRBD connect to the other node, and the resynchronization "
699 "process will start."
700 msgstr "これによってDRBDは他のノードに接続し、再同期プロセスが開始します。"
701
702 #. type: Plain text
703 msgid ""
704 "When the two nodes are _UpToDate_ on all resources again, you can move your "
705 "applications to the already upgraded node (here 'bob'), and then follow the "
706 "same steps on the cluster node still running 8.4."
707 msgstr ""
708 "すべてのリソースが2つのノードで `UpToDate` になったら、アップグレードしたノー"
709 "ド(ここでは `bob` )にアプリケーションを移動させることができます。そして、まだ"
710 "8.4が稼働しているノードで同じ手順を行ってください。"
711
712 #. type: Title ====
713 #, no-wrap
714 msgid "From DRBD 9 to DRBD 9"
715 msgstr "DRBD9からDRBD9"
716
717 #. type: Plain text
718 msgid ""
719 "If you are already running 9.0, it is sufficient to <<s-Upgrading-the-"
720 "packages,install new package versions>>, make the cluster node <<s-upgrade-"
721 "pausing-the-cluster,_standby_>>, <<s-upgrade-reload-kernel-mod,unload/"
722 "reload>> the kernel module, <<s-upgrade-start-drbd,start the resources>>, "
723 "and make the cluster node _online_ againfootnote:[At least that's the state "
724 "at the time of writing - that's how it has been in the past, and we want to "
725 "keep it that easy. But who knows? Who can tell? ;)]."
726 msgstr ""
727 "既にDRBD9を使っている場合には<<s-Upgrading-the-packages,新しいバージョンの"
728 "パッケージをインストール>>することができます。クラスタノードを<<s-upgrade-"
729 "pausing-the-cluster,`スタンバイ`>>にして、カーネルモジュールを<<s-upgrade-"
730 "reload-kernel-mod,アンロード/リロード>>し、<<s-upgrade-start-drbd,リソースを"
731 "起動>>、そしてクラスタノードを再度 `online` にします。footnote:[少なくとも、"
732 "過去にあった書き込み時の状態;)]"
733
734 #. type: Plain text
735 msgid ""
736 "These individual steps have been detailed above, so we won't repeat them "
737 "here."
738 msgstr "個々の手順については上述の項の通りですので、ここでは省略します。"