Debian Codegraph @

UG9/ja/proxy.po

raw
1 # SOME DESCRIPTIVE TITLE
2 # Copyright (C) YEAR Free Software Foundation, Inc.
3 # This file is distributed under the same license as the PACKAGE package.
4 # FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
5 #
6 msgid ""
7 msgstr ""
8 "Project-Id-Version: PACKAGE VERSION\n"
9 "POT-Creation-Date: 2021-04-14 14:39+0900\n"
10 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
11 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
12 "Language-Team: LANGUAGE <[email protected]>\n"
13 "Language: \n"
14 "MIME-Version: 1.0\n"
15 "Content-Type: text/plain; charset=UTF-8\n"
16 "Content-Transfer-Encoding: 8bit\n"
17
18 #. type: Title ==
19 #, no-wrap
20 msgid "Using DRBD Proxy"
21 msgstr "DRBD Proxyの使用"
22
23 #. type: Title ===
24 #, no-wrap
25 msgid "DRBD Proxy deployment considerations"
26 msgstr "DRBD Proxyの使用においての検討事項"
27
28 #. type: Plain text
29 msgid ""
30 "The <<s-drbd-proxy,DRBD Proxy>> processes can either be located directly on "
31 "the machines where DRBD is set up, or they can be placed on distinct "
32 "dedicated servers. A DRBD Proxy instance can serve as a proxy for multiple "
33 "DRBD devices distributed across multiple nodes."
34 msgstr ""
35 "<<s-drbd-proxy,DRBD Proxy>>プロセスは、DRBDが設定されているマシン上に直接配置"
36 "するか、個別の専用サーバに配置することができます。DRBD Proxyインスタンスは、"
37 "複数のノードの複数のDRBDデバイスのプロキシとして機能することができます。"
38
39 #. type: Plain text
40 msgid ""
41 "DRBD Proxy is completely transparent to DRBD. Typically you will expect a "
42 "high number of data packets in flight, therefore the activity log should be "
43 "reasonably large. Since this may cause longer re-sync runs after the crash "
44 "of a primary node, it is recommended to enable DRBD's `csums-alg` setting."
45 msgstr ""
46 "DRBD ProxyはDRBDに対して完全に透過的です。通常は大量のデータパケットがDRBD "
47 "Proxyを含む転送経路に溜まるため、アクティビティログがかなり大きくなります。こ"
48 "れは、プライマリノードのクラッシュ後の長い再同期の実行を引き起こす可能性があ"
49 "るので、それはDRBDの `csums-alg` 設定を有効にすることをお勧めします。"
50
51 #. type: Plain text
52 msgid ""
53 "For more information about the rationale for the DRBD Proxy, please see the "
54 "feature explanation <<s-drbd-proxy>>."
55 msgstr "DRBD Proxyのより詳細な情報については<<s-drbd-proxy>>をご参照ください。"
56
57 #. type: Plain text
58 msgid ""
59 "The DRBD Proxy 3 uses several kernel features that are only available since "
60 "2.6.26, so running it on older systems (e.g. RHEL 5) is not possible; here "
61 "we can still provide DRBD Proxy 1 packages, thoughfootnote:[The v1 uses a "
62 "different scheduling model and will therefore not reach the same performance "
63 "as v3; so even if your production setup is still RHEL 5, perhaps you can run "
64 "one RHEL 6/7 VM in each data center?]."
65 msgstr ""
66 "DRBD Proxy 3ではLiunxカーネル2.6.26以降からのカーネルの機能を使用しています。"
67 "そのため、RHEL5などの古いシステムでは使用できません。なお、現在でもDRBD "
68 "Proxy1のパッケージは提供しています。footnote:[バージョン1では異なるスケジュー"
69 "リングモデルを使用しており、そのためバージョン3と同じようなパフォーマンスを得"
70 "ることはできません。そのため、もし本番環境がRHEL5の場合には、RHEL6/7の仮想マ"
71 "シンを各データセンターに置いてみるのはいかがでしょうか。]."
72
73 #. type: Title ===
74 #, no-wrap
75 msgid "Installation"
76 msgstr "インストール"
77
78 #. type: Plain text
79 msgid ""
80 "To obtain DRBD Proxy, please contact your Linbit sales representative. "
81 "Unless instructed otherwise, please always use the most recent DRBD Proxy "
82 "release."
83 msgstr ""
84 "DRBD Proxyを入手するには、(日本では)サイオステクノロジー株式会社またはその販"
85 "売代理店に連絡してください。特別な理由がない限り、常に最新バージョンのDRBD "
86 "Proxyを使用してください。"
87
88 #. type: Plain text
89 msgid ""
90 "To install DRBD Proxy on Debian and Debian-based systems, use the dpkg tool "
91 "as follows (replace version with your DRBD Proxy version, and architecture "
92 "with your target architecture):"
93 msgstr ""
94 "DebianとDebianベースのシステム上でDRBD Proxyをインストールするには、dpkgを次"
95 "のように使用します(DRBD Proxyのバージョンとアーキテクチャは、ターゲットのアー"
96 "キテクチャに合わせてください)。"
97
98 #. type: delimited block -
99 #, no-wrap
100 msgid "# dpkg -i drbd-proxy_3.2.2_amd64.deb\n"
101 msgstr "# dpkg -i drbd-proxy_3.2.2_amd64.deb\n"
102
103 #. type: Plain text
104 msgid ""
105 "To install DRBD Proxy on RPM based systems (like SLES or RHEL) use the rpm "
106 "tool as follows (replace version with your DRBD Proxy version, and "
107 "architecture with your target architecture):"
108 msgstr ""
109 "RPMベースのシステム(SLESやRedhat)にDRBD Proxyをインストールする場合は、次のコ"
110 "マンドを使用します(DRBD Proxyのバージョンとアーキテクチャは、ターゲットのアー"
111 "キテクチャに合わせてください)。"
112
113 #. type: delimited block -
114 #, no-wrap
115 msgid "# rpm -i drbd-proxy-3.2.2-1.x86_64.rpm\n"
116 msgstr "# rpm -i drbd-proxy-3.2.2-1.x86_64.rpm\n"
117
118 #. type: Plain text
119 msgid ""
120 "Also install the DRBD administration program drbdadm since it is required to "
121 "configure DRBD Proxy."
122 msgstr "DRBD Proxyの設定にはdrbdadmが必要なので、これもインストールします。"
123
124 #. type: Plain text
125 msgid ""
126 "This will install the DRBD proxy binaries as well as an init script which "
127 "usually goes into `/etc/init.d`. Please always use the init script to start/"
128 "stop DRBD proxy since it also configures DRBD Proxy using the `drbdadm` tool."
129 msgstr ""
130 "DRBD Proxyバイナリだけでなく、 `/etc/init.d` に通常に入る起動スクリプトもイン"
131 "ストールします。このスクリプトは単に起動/停止するだけでなく、 `drbdadm` を"
132 "使ってDRBD Proxyの動作も設定します。"
133
134 #. type: Title ===
135 #, no-wrap
136 msgid "License file"
137 msgstr "ライセンスファイル"
138
139 #. type: Plain text
140 msgid ""
141 "When obtaining a license from Linbit, you will be sent a DRBD Proxy license "
142 "file which is required to run DRBD Proxy. The file is called `drbd-proxy."
143 "license`, it must be copied into the `/etc` directory of the target "
144 "machines, and be owned by the user/group `drbdpxy`."
145 msgstr ""
146 "DRBD Proxyの実行には、ライセンスファイルが必要です。DRBD Proxyを実行したいマ"
147 "シンにライセンスファイルを設定してくださいこのファイルは drbd-proxy.license "
148 "と呼ばれ、対象マシンの `/etc` ディレクトリにコピーされ、また `drbdpxy` ユー"
149 "ザー/グループに所有されている必要があります。"
150
151 #. type: delimited block -
152 #, no-wrap
153 msgid "# cp drbd-proxy.license /etc/\n"
154 msgstr "# cp drbd-proxy.license /etc/\n"
155
156 #. type: Title ===
157 #, no-wrap
158 msgid "Configuration using LINSTOR"
159 msgstr "LINSTORを使用した設定"
160
161 #. type: Plain text
162 msgid ""
163 "DRBD Proxy can be configured using LINSTOR as described in the LINSTOR "
164 "USER'S GUIDE."
165 msgstr ""
166 "DRBD Proxyは、LINSTOR ユーザーズガイドで説明しているようにLINSTORを使って構成"
167 "できます"
168
169 #. type: Title ===
170 #, no-wrap
171 msgid "Configuration using resource files"
172 msgstr "リソースファイルを使用した設定"
173
174 #. type: Plain text
175 msgid ""
176 "DRBD Proxy can also be configured by editing resource files. It is "
177 "configured by an additional section called `proxy` and additional `proxy on` "
178 "sections within the host sections."
179 msgstr ""
180 "DRBD Proxyもまたリソースファイルを編集して構成します。設定は、追加のオプショ"
181 "ンセクション `proxy` とホストセクション内の `proxy on` セクションで行います。"
182
183 #. type: Plain text
184 msgid ""
185 "Below is a DRBD configuration example for proxies running directly on the "
186 "DRBD nodes:"
187 msgstr "DRBDノードで直接実行されるプロキシのDRBD Proxyの設定例を次に示します。"
188
189 #. type: delimited block -
190 #, no-wrap
191 msgid ""
192 "resource r0 {\n"
193 "\tprotocol A;\n"
194 "\tdevice /dev/drbd15;\n"
195 "\tdisk /dev/VG/r0;\n"
196 "\tmeta-disk internal;\n"
197 msgstr ""
198 "resource r0 {\n"
199 "\tprotocol A;\n"
200 "\tdevice /dev/drbd15;\n"
201 "\tdisk /dev/VG/r0;\n"
202 "\tmeta-disk internal;\n"
203
204 #. type: delimited block -
205 #, no-wrap
206 msgid ""
207 "\tproxy {\n"
208 "\t\tmemlimit 512M;\n"
209 "\t\tplugin {\n"
210 "\t\t\tzlib level 9;\n"
211 "\t\t}\n"
212 "\t}\n"
213 msgstr ""
214 "\tproxy {\n"
215 "\t\tmemlimit 512M;\n"
216 "\t\tplugin {\n"
217 "\t\t\tzlib level 9;\n"
218 "\t\t}\n"
219 "\t}\n"
220
221 #. type: delimited block -
222 #, no-wrap
223 msgid ""
224 "\ton alice {\n"
225 "\t\taddress 127.0.0.1:7915;\n"
226 "\t\tproxy on alice {\n"
227 "\t\t\tinside 127.0.0.1:7815;\n"
228 "\t\t\toutside 192.168.23.1:7715;\n"
229 "\t\t}\n"
230 "\t}\n"
231 msgstr ""
232 "\ton alice {\n"
233 "\t\taddress 127.0.0.1:7915;\n"
234 "\t\tproxy on alice {\n"
235 "\t\t\tinside 127.0.0.1:7815;\n"
236 "\t\t\toutside 192.168.23.1:7715;\n"
237 "\t\t}\n"
238 "\t}\n"
239
240 #. type: delimited block -
241 #, no-wrap
242 msgid ""
243 "\ton bob {\n"
244 "\t\taddress 127.0.0.1:7915;\n"
245 "\t\tproxy on bob {\n"
246 "\t\t\tinside 127.0.0.1:7815;\n"
247 "\t\t\toutside 192.168.23.2:7715;\n"
248 "\t\t}\n"
249 "\t}\n"
250 "}\n"
251 msgstr ""
252 "\ton bob {\n"
253 "\t\taddress 127.0.0.1:7915;\n"
254 "\t\tproxy on bob {\n"
255 "\t\t\tinside 127.0.0.1:7815;\n"
256 "\t\t\toutside 192.168.23.2:7715;\n"
257 "\t\t}\n"
258 "\t}\n"
259 "}\n"
260
261 #. type: Plain text
262 msgid ""
263 "The `inside` IP address is used for communication between DRBD and the DRBD "
264 "Proxy, whereas the `outside` IP address is used for communication between "
265 "the proxies. The latter channel might have to be allowed in your firewall "
266 "setup."
267 msgstr ""
268 "`inside` IPアドレスはDRBDとDRBD Proxyとの通信に使用し、 `outside` IPアドレス"
269 "はプロキシ間の通信に使用します。後者はファイヤーウォール設定で許可する必要が"
270 "あります。"
271
272 #. type: Title ===
273 #, no-wrap
274 msgid "Controlling DRBD Proxy"
275 msgstr "DRBD Proxyの制御"
276
277 #. type: Plain text
278 msgid ""
279 "`drbdadm` offers the `proxy-up` and `proxy-down` subcommands to configure or "
280 "delete the connection to the local DRBD Proxy process of the named DRBD "
281 "resource(s). These commands are used by the `start` and `stop` actions which "
282 "`/etc/init.d/drbdproxy` implements."
283 msgstr ""
284 "`drbdadm` には `proxy-up` および `proxy-down` サブコマンドがあり、名前付き"
285 "DRBDリソースのローカルDRBD Proxyプロセスとの接続を設定したり削除したりできま"
286 "す。これらのコマンドは、`/etc/init.d/drbdproxy` が実装する `start` および "
287 "`stop` アクションによって使用されます。"
288
289 #. type: Plain text
290 msgid ""
291 "The DRBD Proxy has a low level configuration tool, called `drbd-proxy-ctl`. "
292 "When called without any option it operates in interactive mode."
293 msgstr ""
294 "DRBD Proxyには `drbd-proxy-ctl` という下位レベル構成ツールがあります。この"
295 "ツールをオプションを指定せずに呼び出した場合は、対話型モードで動作します。"
296
297 #. type: Plain text
298 msgid ""
299 "To pass a command directly, avoiding interactive mode, use the `-c` "
300 "parameter followed by the command."
301 msgstr ""
302 "対話型モードをにせずコマンドを直接渡すには、 `'-c'` パラメータをコマンドに続"
303 "けて使用します。"
304
305 #. type: Plain text
306 msgid "To display the available commands use:"
307 msgstr "使用可能なコマンドを表示するには次のようにします。"
308
309 #. type: delimited block -
310 #, no-wrap
311 msgid "# drbd-proxy-ctl -c \"help\"\n"
312 msgstr "# drbd-proxy-ctl -c \"help\"\n"
313
314 #. type: Plain text
315 msgid "Note the double quotes around the command being passed."
316 msgstr "コマンドの周りのダブルクォートは読み飛ばされる点に注意ください。"
317
318 #. type: Plain text
319 msgid ""
320 "Here is a list of commands; while the first few ones are typically only used "
321 "indirectly (via `drbdadm proxy-up` resp. `drbdadm proxy-down`), the latter "
322 "ones give various status information."
323 msgstr ""
324 "以下にコマンドを列挙します。最初のいくつかのコマンドは通常は直接使用すること"
325 "はありません( `drbdadm proxy-up` や `drbdadm proxy-down` コマンド経由で使用さ"
326 "れます)。それ以降のものは様々なステータスや情報を表示します。"
327
328 #. type: Block title
329 #, no-wrap
330 msgid "`add connection _<name>_ _lots of arguments_`"
331 msgstr "`add connection _<name>_ _lots of arguments_`"
332
333 #. type: Plain text
334 msgid ""
335 "Creates a communication path. As this is run via `drbdadm proxy-up` the long "
336 "list of arguments is omitted here."
337 msgstr ""
338 "通信経路を作成します。これは `drbdadm proxy-up` コマンド経由で使用されるもの"
339 "なので、長い構文は省略しています。"
340
341 #. type: Block title
342 #, no-wrap
343 msgid "`del connection _<name>_`"
344 msgstr "`del connection _<name>_`"
345
346 #. type: Plain text
347 msgid "Removes a communication path."
348 msgstr "通信経路を削除します。"
349
350 #. type: Block title
351 #, no-wrap
352 msgid "`set memlimit _<name>_ _<memlimit-in-bytes>_`"
353 msgstr "`set memlimit _<name>_ _<memlimit-in-bytes>_`"
354
355 #. type: Plain text
356 msgid ""
357 "Sets the memory limit for a connection; this can only be done when setting "
358 "it up afresh, changing it during runtime is not possible. + This command "
359 "understands the usual units `k`, `M`, and `G`."
360 msgstr ""
361 "コネクションにメモリ制限を設けます。これは新規に設定したときのみ有効で、稼働"
362 "中に変更することはできません。 このコマンドでは通常使用する単位の `k` 、 "
363 "`M` 、 `G` を使用できます。"
364
365 #. type: Block title
366 #, no-wrap
367 msgid "`show`"
368 msgstr "`show`"
369
370 #. type: Plain text
371 msgid "Shows currently configured communication paths."
372 msgstr "現在設定されている通信経路を表示します。"
373
374 #. type: Block title
375 #, no-wrap
376 msgid "`show memusage`"
377 msgstr "`show memusage`"
378
379 #. type: Plain text
380 msgid "Shows memory usage of each connection. +"
381 msgstr "各コネクションでのメモリ使用量を表示します。 +"
382
383 #. type: Plain text
384 msgid "As an example,"
385 msgstr "例:"
386
387 #. type: delimited block -
388 #, no-wrap
389 msgid "# watch -n 1 'drbd-proxy-ctl -c \"show memusage\"'\n"
390 msgstr "# watch -n 1 'drbd-proxy-ctl -c \"show memusage\"'\n"
391
392 #. type: Plain text
393 msgid ""
394 "monitors memory usage. Please note that the quotes are required as listed "
395 "above."
396 msgstr ""
397 "メモリ使用を監視します。上記に挙げているように、クォートが必要である点にご注"
398 "意ください。"
399
400 #. type: Block title
401 #, no-wrap
402 msgid "`show [h]subconnections`"
403 msgstr "`show [h]subconnections`"
404
405 #. type: Plain text
406 msgid ""
407 "Shows currently established individual connections together with some stats. "
408 "With `h` outputs bytes in human readable format."
409 msgstr ""
410 "現在接続中の各コネクションを種々の情報と共に表示します。 `h` をつけると、人間"
411 "が可読のバイト単位のフォーマットで出力します。"
412
413 #. type: Block title
414 #, no-wrap
415 msgid "`show [h]connections`"
416 msgstr "`show [h]connections`"
417
418 #. type: Plain text
419 msgid ""
420 "Shows currently configured connections and their states With `h` outputs "
421 "bytes in human readable format. +"
422 msgstr ""
423 "現在接続中のコネクションをステータスと共に表示します。 `h` をつけると、人間が"
424 "可読のバイト単位のフォーマットで出力します。 +"
425
426 #. type: Plain text
427 msgid "The column `Status` will show one of these states:"
428 msgstr "`Status` の行では以下のうちいずれかのステータスを表示します。"
429
430 #. type: Plain text
431 msgid "_Off_: No communication to the remote DRBD Proxy process."
432 msgstr "`Off`: 対向のDRBD Proxyプロセスとの通信経路がない。"
433
434 #. type: Plain text
435 msgid ""
436 "_Half-up_: The connection to the remote DRBD Proxy could be established; the "
437 "Proxy => DRBD paths are not up yet."
438 msgstr ""
439 "`Half-up`: 対向のDRBD Proxyプロセスとの接続はおそらく確立しているものの、"
440 "ProxyとDRBD間の経路がまだ確立していない。"
441
442 #. type: Plain text
443 msgid ""
444 "_DRBD-conn_: The first few packets are being pushed across the connection; "
445 "but still e.g. a Split-Brain situation might serve it again."
446 msgstr ""
447 "`DRBD-conn`: 最初の数パケットをコネクションを通じて送信してはいるものの、まだ"
448 "スプリットブレインなどの状態にある。"
449
450 #. type: Plain text
451 msgid "_Up_: The DRBD connection is fully established."
452 msgstr "`Up`: DRBDのコネクションが完全に確立された状態。"
453
454 #. type: Block title
455 #, no-wrap
456 msgid "`shutdown`"
457 msgstr "`shutdown`"
458
459 #. type: Plain text
460 msgid ""
461 "Shuts down the `drbd-proxy` program. Attention: this unconditionally "
462 "terminates any DRBD connections using the DRBD proxy."
463 msgstr ""
464 "`drbd-proxy` プログラムをシャットダウンする。Attention: 本操作を行うと、DRBD "
465 "Proxyを使ったすべてのDRBDコネクションが終了します。"
466
467 #. type: Block title
468 #, no-wrap
469 msgid "`quit`"
470 msgstr "`quit`"
471
472 #. type: Plain text
473 msgid ""
474 "Exits the client program (closes the control connection), but leaves the "
475 "DRBD proxy running."
476 msgstr ""
477 "drbd-proxy-ctlプログラムを終了します(プログラムとの接続を閉じます)。※DRBD "
478 "Proxy自体は動作したままです。"
479
480 #. type: Block title
481 #, no-wrap
482 msgid "`print statistics`"
483 msgstr "`print statistics`"
484
485 #. type: Plain text
486 msgid ""
487 "This prints detailed statistics for the currently active connections, in an "
488 "easily parseable format. Use this for integration to your monitoring "
489 "solution! +"
490 msgstr ""
491 "現在アクティブなコネクションの読みやすいフォーマットでの詳細な統計情報を表示"
492 "します。この機能をご使用の監視方法に統合して利用するのもよいでしょう。 +"
493
494 #. type: Plain text
495 msgid ""
496 "While the commands above are only accepted from UID 0 (i.e., the `root` "
497 "user), this one can be used by any user (provided that unix permissions "
498 "allow access on the proxy socket at `/var/run/drbd-proxy/drbd-proxy-ctl."
499 "socket`); see the init script at `/etc/init.d/drbdproxy` about setting the "
500 "rights."
501 msgstr ""
502 "上述のコマンド群はすべて `root` ユーザーなどのUID0のユーザーだけが実行できま"
503 "すが、このコマンドは全ユーザが使用できます( `/var/run/drbd-proxy/drbd-proxy-"
504 "ctl.socket` へのアクセス権があれば)。 `/etc/init.d/drbdproxy` の権限を設定し"
505 "ている箇所をご確認ください。"
506
507 #. type: Title ===
508 #, no-wrap
509 msgid "About DRBD Proxy plugins"
510 msgstr "DRBD Proxyプラグインについて"
511
512 #. type: Plain text
513 msgid ""
514 "Since DRBD Proxy version 3 the proxy allows to enable a few specific plugins "
515 "for the WAN connection. + The currently available plugins are `zstd`, `lz4`, "
516 "`zlib` and `lzma` (all software compression), and `aha` (hardware "
517 "compression support, see http://www.aha.com/data-compression/)."
518 msgstr ""
519 "DRBD proxy3以降のプロキシではWANコネクション用のプラグインを使用できます。現"
520 "在使用できるプラグインは `zstd`, `lz4`, `zlib`, `lzma` (すべてのソフトウェア"
521 "圧縮), `aha` (ハードウェア圧縮サポート。詳細は http://www.aha.com/data-"
522 "compression/ 参照ください。"
523
524 #. type: Plain text
525 msgid ""
526 "`zstd` (Zstandard) is a real-time compression algorithm, providing high "
527 "compression ratios. It offers a very wide range of compression / speed trade-"
528 "off, while being backed by a very fast decoder. Compression rates are "
529 "dependent on \"level\" parameter which can be arranged between 1 to 22. Over "
530 "level 20, Drbd Proxy will require more memory."
531 msgstr ""
532 "`zstd` (Zstandard)は、高圧縮率を提供するリアルタイム圧縮アルゴリズムです。非"
533 "常に高速なデコーダーのもとで、圧縮/速度の幅広いトレードオフ値を提供します。圧"
534 "縮率はレベルパラメーターに依存し、1〜22 の範囲で指定できます。レベル 20 を超"
535 "えると、Drbd プロキシに必要なメモリが増加します。"
536
537 #. type: Plain text
538 msgid ""
539 "`lz4` is a very fast compression algorithm; the data typically gets "
540 "compressed down by 1:2 to 1:4, half- to two-thirds of the bandwidth can be "
541 "saved."
542 msgstr ""
543 "`lz4` は非常に高速な圧縮アルゴリズムです。 通常データを1/2から1/4に圧縮でき、"
544 "使用するネットワーク帯域も1/2から3/2程度になります。"
545
546 #. type: Plain text
547 msgid ""
548 "The `zlib` plugin uses the GZIP algorithm for compression; it uses a bit "
549 "more CPU than `lz4`, but gives a ratio of 1:3 to 1:5."
550 msgstr ""
551 "`zlib` プラグインはGZIPアルゴリズムを圧縮に使用します。 `lz4` よりも多少CPUを"
552 "消費しますが、1/3から1/5になります。"
553
554 #. type: Plain text
555 msgid ""
556 "The `lzma` plugin uses the `liblzma2` library. It can use dictionaries of "
557 "several hundred MiB; these allow for very efficient delta-compression of "
558 "repeated data, even for small changes. `lzma` needs much more CPU and "
559 "memory, but results in much better compression than `zlib` -- real-world "
560 "tests with a VM sitting on top of DRBD gave ratios of 1:10 to 1:40. The "
561 "`lzma` plugin has to be enabled in your license."
562 msgstr ""
563 "`lzma` プラグインは `liblzma2` ライブラリを使用します。数百MiBの辞書を使っ"
564 "て、小さな変更であっても非常に効率的な繰り返しデータの差分符号化を行います。 "
565 "`lzma` はより多くCPUとメモリを必要としますが、 `zlib` よりも高い圧縮率になり"
566 "ます。DRBD上にVMを置いた実際の環境でテストしたところ、1/10から1/40になりまし"
567 "た。`lzma` プラグインはライセンスで有効化する必要があります。"
568
569 #. type: Plain text
570 msgid ""
571 "`aha` uses hardware compression cards, like the AHA367PCIe (10Gbit/sec) or "
572 "AHA372 (20GBit/sec); this is the fastest compression for contemporary "
573 "hardware. + You will need a special flag in your license file to enable this "
574 "plugin."
575 msgstr ""
576 "`aha` はAHA367PCIe (10Gbit/sec)やAHA372 (20GBit/sec)などのハードウェア圧縮"
577 "カードを使用します。現在のハードウェアではこれがもっとも高速な圧縮です。ahaプ"
578 "ラグインはライセンスで有効化する必要があります。"
579
580 #. type: Plain text
581 msgid ""
582 "Please contact LINBIT to find the best settings for your environment - it "
583 "depends on the CPU (speed, number of threads), available memory, input and "
584 "available output bandwidth, and expected IO spikes. Having a week of "
585 "`sysstat` data already available helps in determining the configuration, too."
586 msgstr ""
587 "ご利用の環境に最適な設定についてはLINBIT(またはサイオステクノロジー)へご相談"
588 "ください。性能はCPU(速度、スレッド数)、メモリ、帯域幅の入出力、CPUスパイクな"
589 "どに依存します。一週間分の `sysstat` データがあれば、設定を決定するのに役立ち"
590 "ます。"
591
592 #. type: Plain text
593 msgid ""
594 "Please note that the older `compression on` in the `proxy` section is "
595 "deprecated, and will be removed in a future release. + Currently it is "
596 "treated as `zlib level 9`."
597 msgstr ""
598 "`proxy` セクションの `compression on` は現在使用していません。近いうちに廃止"
599 "する予定です。現在は `zlib level 9` として扱います。"
600
601 #. type: Title ====
602 #, no-wrap
603 msgid "Using a WAN Side Bandwidth Limit"
604 msgstr "WAN側の帯域幅制限を使用する"
605
606 #. type: Plain text
607 msgid ""
608 "The experimental `bwlimit` option of DRBD Proxy is broken. Do not use it, as "
609 "it may cause applications on DRBD to block on IO. It will be removed."
610 msgstr ""
611 "DRBD Proxyの実験的な `bwlimit` は壊れていますので、使わないでください。DRBDを"
612 "使うアプリケーションがIOでブロックするかもしれません。これは将来削除されま"
613 "す。"
614
615 #. type: Plain text
616 msgid ""
617 "Instead use the Linux kernel's traffic control framework to limit bandwidth "
618 "consumed by proxy on the WAN side."
619 msgstr ""
620 "代わって、Linuxカーネルのトラフィック制御フレームワークを使ってください。"
621
622 #. type: Plain text
623 msgid ""
624 "In the following example you would need to replace the interface name, the "
625 "source port and the ip address of the peer."
626 msgstr ""
627 "以下の例で、インターフェース名、ソースのポート、IPアドレスを変更して使ってく"
628 "ださい。"
629
630 #. type: delimited block -
631 #, no-wrap
632 msgid ""
633 "# tc qdisc add dev eth0 root handle 1: htb default 1\n"
634 "# tc class add dev eth0 parent 1: classid 1:1 htb rate 1gbit\n"
635 "# tc class add dev eth0 parent 1:1 classid 1:10 htb rate 500kbit\n"
636 "# tc filter add dev eth0 parent 1: protocol ip prio 16 u32 \\\n"
637 " match ip sport 7000 0xffff \\\n"
638 " match ip dst 192.168.47.11 flowid 1:10\n"
639 "# tc filter add dev eth0 parent 1: protocol ip prio 16 u32 \\\n"
640 " match ip dport 7000 0xffff \\\n"
641 " match ip dst 192.168.47.11 flowid 1:10\n"
642 msgstr ""
643 "# tc qdisc add dev eth0 root handle 1: htb default 1\n"
644 "# tc class add dev eth0 parent 1: classid 1:1 htb rate 1gbit\n"
645 "# tc class add dev eth0 parent 1:1 classid 1:10 htb rate 500kbit\n"
646 "# tc filter add dev eth0 parent 1: protocol ip prio 16 u32 \\\n"
647 " match ip sport 7000 0xffff \\\n"
648 " match ip dst 192.168.47.11 flowid 1:10\n"
649 "# tc filter add dev eth0 parent 1: protocol ip prio 16 u32 \\\n"
650 " match ip dport 7000 0xffff \\\n"
651 " match ip dst 192.168.47.11 flowid 1:10\n"
652
653 #. type: Plain text
654 msgid "You can remove this bandwidth limitation with"
655 msgstr "この帯域幅制限は以下のコマンドで削除できます。"
656
657 #. type: delimited block -
658 #, no-wrap
659 msgid "# tc qdisc del dev eth0 root handle 1\n"
660 msgstr "# tc qdisc del dev eth0 root handle 1\n"
661
662 #. type: Title ===
663 #, no-wrap
664 msgid "Troubleshooting"
665 msgstr "トラブルシューティング"
666
667 #. type: Plain text
668 msgid ""
669 "DRBD proxy logs via syslog using the `LOG_DAEMON` facility. Usually you will "
670 "find DRBD Proxy messages in `/var/log/daemon.log`."
671 msgstr ""
672 "DRBD proxyのログはsyslogの `LOG_DAEMON` ファシリティに記録されます。通常ログ"
673 "は `/var/log/daemon.log` に記録されます。"
674
675 #. type: Plain text
676 msgid ""
677 "Enabling debug mode in DRBD Proxy can be done with the following command."
678 msgstr "DRBD Proxyでデバッグモードを有効にするには次のようにします。"
679
680 #. type: delimited block -
681 #, no-wrap
682 msgid "# drbd-proxy-ctl -c 'set loglevel debug'\n"
683 msgstr "# drbd-proxy-ctl -c 'set loglevel debug'\n"
684
685 #. type: Plain text
686 msgid ""
687 "For example, if proxy fails to connect it will log something like `Rejecting "
688 "connection because I can't connect on the other side`. In that case, please "
689 "check if DRBD is running (not in StandAlone mode) on both nodes and if both "
690 "proxies are running. Also double-check your configuration."
691 msgstr ""
692 "たとえば、DRBD Proxyが接続に失敗すると、 `Rejecting connection because I "
693 "can’t connect on the other side` というようなメッセージがログに記録されます。"
694 "その場合は、DRBDが(スタンドアローンモードでなく)両方のノードで動作していて、"
695 "両方ノードでプロキシが動作していることを確認してください。また、両方のノード"
696 "で設定値を確認してください。"