| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Device Tree Source for the KZM-A9-GT board |
| 4 |
* |
| 5 |
* Copyright (C) 2012 Horms Solutions Ltd. |
| 6 |
* |
| 7 |
* Based on sh73a0-kzm9g.dts |
| 8 |
* Copyright (C) 2012 Renesas Solutions Corp. |
| 9 |
*/ |
| 10 |
|
| 11 |
/dts-v1/; |
| 12 |
#include "sh73a0.dtsi" |
| 13 |
#include <dt-bindings/gpio/gpio.h> |
| 14 |
#include <dt-bindings/input/input.h> |
| 15 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 16 |
|
| 17 |
/ { |
| 18 |
model = "KZM-A9-GT"; |
| 19 |
compatible = "renesas,kzm9g", "renesas,sh73a0"; |
| 20 |
|
| 21 |
aliases { |
| 22 |
serial0 = &scifa4; |
| 23 |
}; |
| 24 |
|
| 25 |
cpus { |
| 26 |
cpu@0 { |
| 27 |
cpu0-supply = <&vdd_dvfs>; |
| 28 |
operating-points = <1196000 1315000>, /* kHz uV */ |
| 29 |
< 598000 1175000>, |
| 30 |
< 398667 1065000>; |
| 31 |
voltage-tolerance = <1>; /* 1% */ |
| 32 |
}; |
| 33 |
}; |
| 34 |
|
| 35 |
chosen { |
| 36 |
bootargs = "root=/dev/nfs ip=on ignore_loglevel rw"; |
| 37 |
stdout-path = "serial0:115200n8"; |
| 38 |
}; |
| 39 |
|
| 40 |
memory@40000000 { |
| 41 |
device_type = "memory"; |
| 42 |
reg = <0x40000000 0x20000000>; |
| 43 |
}; |
| 44 |
|
| 45 |
reg_1p8v: regulator-1p8v { |
| 46 |
compatible = "regulator-fixed"; |
| 47 |
regulator-name = "fixed-1.8V"; |
| 48 |
regulator-min-microvolt = <1800000>; |
| 49 |
regulator-max-microvolt = <1800000>; |
| 50 |
regulator-always-on; |
| 51 |
regulator-boot-on; |
| 52 |
}; |
| 53 |
|
| 54 |
reg_3p3v: regulator-3p3v { |
| 55 |
compatible = "regulator-fixed"; |
| 56 |
regulator-name = "fixed-3.3V"; |
| 57 |
regulator-min-microvolt = <3300000>; |
| 58 |
regulator-max-microvolt = <3300000>; |
| 59 |
regulator-always-on; |
| 60 |
regulator-boot-on; |
| 61 |
}; |
| 62 |
|
| 63 |
vmmc_sdhi0: regulator-vmmc-sdhi0 { |
| 64 |
compatible = "regulator-fixed"; |
| 65 |
regulator-name = "SDHI0 Vcc"; |
| 66 |
regulator-min-microvolt = <3300000>; |
| 67 |
regulator-max-microvolt = <3300000>; |
| 68 |
gpio = <&pfc 15 GPIO_ACTIVE_HIGH>; |
| 69 |
enable-active-high; |
| 70 |
}; |
| 71 |
|
| 72 |
vmmc_sdhi2: regulator-vmmc-sdhi2 { |
| 73 |
compatible = "regulator-fixed"; |
| 74 |
regulator-name = "SDHI2 Vcc"; |
| 75 |
regulator-min-microvolt = <3300000>; |
| 76 |
regulator-max-microvolt = <3300000>; |
| 77 |
gpio = <&pfc 14 GPIO_ACTIVE_HIGH>; |
| 78 |
enable-active-high; |
| 79 |
}; |
| 80 |
|
| 81 |
leds { |
| 82 |
compatible = "gpio-leds"; |
| 83 |
led1 { |
| 84 |
gpios = <&pfc 20 GPIO_ACTIVE_LOW>; |
| 85 |
label = "LED1"; |
| 86 |
}; |
| 87 |
led2 { |
| 88 |
gpios = <&pfc 21 GPIO_ACTIVE_LOW>; |
| 89 |
label = "LED2"; |
| 90 |
}; |
| 91 |
led3 { |
| 92 |
gpios = <&pfc 22 GPIO_ACTIVE_LOW>; |
| 93 |
label = "LED3"; |
| 94 |
}; |
| 95 |
led4 { |
| 96 |
gpios = <&pfc 23 GPIO_ACTIVE_LOW>; |
| 97 |
label = "LED4"; |
| 98 |
}; |
| 99 |
}; |
| 100 |
|
| 101 |
keyboard { |
| 102 |
compatible = "gpio-keys"; |
| 103 |
|
| 104 |
back-key { |
| 105 |
gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>; |
| 106 |
linux,code = <KEY_BACK>; |
| 107 |
label = "SW3"; |
| 108 |
}; |
| 109 |
|
| 110 |
right-key { |
| 111 |
gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>; |
| 112 |
linux,code = <KEY_RIGHT>; |
| 113 |
label = "SW2-R"; |
| 114 |
}; |
| 115 |
|
| 116 |
left-key { |
| 117 |
gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>; |
| 118 |
linux,code = <KEY_LEFT>; |
| 119 |
label = "SW2-L"; |
| 120 |
}; |
| 121 |
|
| 122 |
enter-key { |
| 123 |
gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>; |
| 124 |
linux,code = <KEY_ENTER>; |
| 125 |
label = "SW2-P"; |
| 126 |
}; |
| 127 |
|
| 128 |
up-key { |
| 129 |
gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>; |
| 130 |
linux,code = <KEY_UP>; |
| 131 |
label = "SW2-U"; |
| 132 |
}; |
| 133 |
|
| 134 |
down-key { |
| 135 |
gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>; |
| 136 |
linux,code = <KEY_DOWN>; |
| 137 |
label = "SW2-D"; |
| 138 |
}; |
| 139 |
|
| 140 |
home-key { |
| 141 |
gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>; |
| 142 |
linux,code = <KEY_HOME>; |
| 143 |
label = "SW1"; |
| 144 |
wakeup-source; |
| 145 |
}; |
| 146 |
|
| 147 |
wakeup-key { |
| 148 |
gpios = <&pfc 159 GPIO_ACTIVE_LOW>; |
| 149 |
linux,code = <KEY_WAKEUP>; |
| 150 |
label = "NMI"; |
| 151 |
wakeup-source; |
| 152 |
}; |
| 153 |
}; |
| 154 |
|
| 155 |
sound { |
| 156 |
compatible = "simple-audio-card"; |
| 157 |
simple-audio-card,format = "left_j"; |
| 158 |
simple-audio-card,cpu { |
| 159 |
sound-dai = <&sh_fsi2 0>; |
| 160 |
}; |
| 161 |
simple-audio-card,codec { |
| 162 |
sound-dai = <&ak4648>; |
| 163 |
bitclock-master; |
| 164 |
frame-master; |
| 165 |
system-clock-frequency = <11289600>; |
| 166 |
}; |
| 167 |
}; |
| 168 |
}; |
| 169 |
|
| 170 |
&bsc { |
| 171 |
ethernet@10000000 { |
| 172 |
compatible = "smsc,lan9221", "smsc,lan9115"; |
| 173 |
reg = <0x10000000 0x100>; |
| 174 |
phy-mode = "mii"; |
| 175 |
interrupts-extended = <&irqpin0 3 IRQ_TYPE_EDGE_FALLING>; |
| 176 |
reg-io-width = <4>; |
| 177 |
smsc,irq-push-pull; |
| 178 |
smsc,save-mac-address; |
| 179 |
vddvario-supply = <®_1p8v>; |
| 180 |
vdd33a-supply = <®_3p3v>; |
| 181 |
}; |
| 182 |
}; |
| 183 |
|
| 184 |
&cmt1 { |
| 185 |
status = "okay"; |
| 186 |
}; |
| 187 |
|
| 188 |
&extal2_clk { |
| 189 |
clock-frequency = <48000000>; |
| 190 |
}; |
| 191 |
|
| 192 |
&i2c0 { |
| 193 |
status = "okay"; |
| 194 |
|
| 195 |
compass@c { |
| 196 |
compatible = "asahi-kasei,ak8975"; |
| 197 |
reg = <0x0c>; |
| 198 |
interrupts-extended = <&irqpin3 4 IRQ_TYPE_EDGE_FALLING>; |
| 199 |
}; |
| 200 |
|
| 201 |
ak4648: codec@12 { |
| 202 |
compatible = "asahi-kasei,ak4648"; |
| 203 |
reg = <0x12>; |
| 204 |
#sound-dai-cells = <0>; |
| 205 |
}; |
| 206 |
|
| 207 |
accelerometer@1d { |
| 208 |
compatible = "adi,adxl345"; |
| 209 |
reg = <0x1d>; |
| 210 |
interrupts-extended = <&irqpin3 2 IRQ_TYPE_LEVEL_HIGH>, |
| 211 |
<&irqpin3 3 IRQ_TYPE_LEVEL_HIGH>; |
| 212 |
interrupt-names = "INT1", "INT2"; |
| 213 |
}; |
| 214 |
|
| 215 |
rtc@32 { |
| 216 |
compatible = "ricoh,r2025sd"; |
| 217 |
reg = <0x32>; |
| 218 |
}; |
| 219 |
|
| 220 |
as3711@40 { |
| 221 |
compatible = "ams,as3711"; |
| 222 |
reg = <0x40>; |
| 223 |
|
| 224 |
regulators { |
| 225 |
vdd_dvfs: sd1 { |
| 226 |
regulator-name = "1.315V CPU"; |
| 227 |
regulator-min-microvolt = <1050000>; |
| 228 |
regulator-max-microvolt = <1350000>; |
| 229 |
regulator-always-on; |
| 230 |
regulator-boot-on; |
| 231 |
}; |
| 232 |
sd2 { |
| 233 |
regulator-name = "1.8V"; |
| 234 |
regulator-min-microvolt = <1800000>; |
| 235 |
regulator-max-microvolt = <1800000>; |
| 236 |
regulator-always-on; |
| 237 |
regulator-boot-on; |
| 238 |
}; |
| 239 |
sd4 { |
| 240 |
regulator-name = "1.215V"; |
| 241 |
regulator-min-microvolt = <1215000>; |
| 242 |
regulator-max-microvolt = <1235000>; |
| 243 |
regulator-always-on; |
| 244 |
regulator-boot-on; |
| 245 |
}; |
| 246 |
ldo2 { |
| 247 |
regulator-name = "2.8V CPU"; |
| 248 |
regulator-min-microvolt = <2800000>; |
| 249 |
regulator-max-microvolt = <2800000>; |
| 250 |
regulator-always-on; |
| 251 |
regulator-boot-on; |
| 252 |
}; |
| 253 |
ldo3 { |
| 254 |
regulator-name = "3.0V CPU"; |
| 255 |
regulator-min-microvolt = <3000000>; |
| 256 |
regulator-max-microvolt = <3000000>; |
| 257 |
regulator-always-on; |
| 258 |
regulator-boot-on; |
| 259 |
}; |
| 260 |
ldo4 { |
| 261 |
regulator-name = "2.8V"; |
| 262 |
regulator-min-microvolt = <2800000>; |
| 263 |
regulator-max-microvolt = <2800000>; |
| 264 |
regulator-always-on; |
| 265 |
regulator-boot-on; |
| 266 |
}; |
| 267 |
ldo5 { |
| 268 |
regulator-name = "2.8V #2"; |
| 269 |
regulator-min-microvolt = <2800000>; |
| 270 |
regulator-max-microvolt = <2800000>; |
| 271 |
regulator-always-on; |
| 272 |
regulator-boot-on; |
| 273 |
}; |
| 274 |
ldo7 { |
| 275 |
regulator-name = "1.15V CPU"; |
| 276 |
regulator-min-microvolt = <1150000>; |
| 277 |
regulator-max-microvolt = <1150000>; |
| 278 |
regulator-always-on; |
| 279 |
regulator-boot-on; |
| 280 |
}; |
| 281 |
ldo8 { |
| 282 |
regulator-name = "1.15V CPU #2"; |
| 283 |
regulator-min-microvolt = <1150000>; |
| 284 |
regulator-max-microvolt = <1150000>; |
| 285 |
regulator-always-on; |
| 286 |
regulator-boot-on; |
| 287 |
}; |
| 288 |
}; |
| 289 |
}; |
| 290 |
}; |
| 291 |
|
| 292 |
&i2c1 { |
| 293 |
status = "okay"; |
| 294 |
|
| 295 |
touchscreen@55 { |
| 296 |
compatible = "sitronix,st1232"; |
| 297 |
reg = <0x55>; |
| 298 |
interrupts-extended = <&irqpin1 0 IRQ_TYPE_EDGE_FALLING>; |
| 299 |
}; |
| 300 |
}; |
| 301 |
|
| 302 |
&i2c3 { |
| 303 |
pinctrl-0 = <&i2c3_pins>; |
| 304 |
pinctrl-names = "default"; |
| 305 |
status = "okay"; |
| 306 |
|
| 307 |
pcf8575: gpio@20 { |
| 308 |
compatible = "nxp,pcf8575"; |
| 309 |
reg = <0x20>; |
| 310 |
interrupts-extended = <&irqpin2 3 IRQ_TYPE_EDGE_FALLING>; |
| 311 |
gpio-controller; |
| 312 |
#gpio-cells = <2>; |
| 313 |
interrupt-controller; |
| 314 |
#interrupt-cells = <2>; |
| 315 |
}; |
| 316 |
}; |
| 317 |
|
| 318 |
&mmcif { |
| 319 |
pinctrl-0 = <&mmcif_pins>; |
| 320 |
pinctrl-names = "default"; |
| 321 |
|
| 322 |
bus-width = <8>; |
| 323 |
vmmc-supply = <®_1p8v>; |
| 324 |
status = "okay"; |
| 325 |
}; |
| 326 |
|
| 327 |
&pfc { |
| 328 |
i2c3_pins: i2c3 { |
| 329 |
groups = "i2c3_1"; |
| 330 |
function = "i2c3"; |
| 331 |
}; |
| 332 |
|
| 333 |
mmcif_pins: mmc { |
| 334 |
mux { |
| 335 |
groups = "mmc0_data8_0", "mmc0_ctrl_0"; |
| 336 |
function = "mmc0"; |
| 337 |
}; |
| 338 |
cfg { |
| 339 |
groups = "mmc0_data8_0"; |
| 340 |
pins = "PORT279"; |
| 341 |
bias-pull-up; |
| 342 |
}; |
| 343 |
}; |
| 344 |
|
| 345 |
scifa4_pins: scifa4 { |
| 346 |
groups = "scifa4_data", "scifa4_ctrl"; |
| 347 |
function = "scifa4"; |
| 348 |
}; |
| 349 |
|
| 350 |
sdhi0_pins: sd0 { |
| 351 |
groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp"; |
| 352 |
function = "sdhi0"; |
| 353 |
}; |
| 354 |
|
| 355 |
sdhi2_pins: sd2 { |
| 356 |
groups = "sdhi2_data4", "sdhi2_ctrl"; |
| 357 |
function = "sdhi2"; |
| 358 |
}; |
| 359 |
|
| 360 |
fsia_pins: sounda { |
| 361 |
groups = "fsia_mclk_in", "fsia_sclk_in", |
| 362 |
"fsia_data_in", "fsia_data_out"; |
| 363 |
function = "fsia"; |
| 364 |
}; |
| 365 |
}; |
| 366 |
|
| 367 |
&scifa4 { |
| 368 |
pinctrl-0 = <&scifa4_pins>; |
| 369 |
pinctrl-names = "default"; |
| 370 |
|
| 371 |
uart-has-rtscts; |
| 372 |
status = "okay"; |
| 373 |
}; |
| 374 |
|
| 375 |
&sdhi0 { |
| 376 |
pinctrl-0 = <&sdhi0_pins>; |
| 377 |
pinctrl-names = "default"; |
| 378 |
|
| 379 |
vmmc-supply = <&vmmc_sdhi0>; |
| 380 |
bus-width = <4>; |
| 381 |
status = "okay"; |
| 382 |
}; |
| 383 |
|
| 384 |
&sdhi2 { |
| 385 |
pinctrl-0 = <&sdhi2_pins>; |
| 386 |
pinctrl-names = "default"; |
| 387 |
|
| 388 |
vmmc-supply = <&vmmc_sdhi2>; |
| 389 |
bus-width = <4>; |
| 390 |
broken-cd; |
| 391 |
status = "okay"; |
| 392 |
}; |
| 393 |
|
| 394 |
&sh_fsi2 { |
| 395 |
pinctrl-0 = <&fsia_pins>; |
| 396 |
pinctrl-names = "default"; |
| 397 |
|
| 398 |
status = "okay"; |
| 399 |
}; |