| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Device Tree Source for the Alt board |
| 4 |
* |
| 5 |
* Copyright (C) 2014 Renesas Electronics Corporation |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
#include "r8a7794.dtsi" |
| 10 |
#include <dt-bindings/gpio/gpio.h> |
| 11 |
#include <dt-bindings/input/input.h> |
| 12 |
|
| 13 |
/ { |
| 14 |
model = "Alt"; |
| 15 |
compatible = "renesas,alt", "renesas,r8a7794"; |
| 16 |
|
| 17 |
aliases { |
| 18 |
serial0 = &scif2; |
| 19 |
i2c9 = &gpioi2c1; |
| 20 |
i2c10 = &gpioi2c4; |
| 21 |
i2c11 = &i2chdmi; |
| 22 |
i2c12 = &i2cexio4; |
| 23 |
mmc0 = &mmcif0; |
| 24 |
mmc1 = &sdhi0; |
| 25 |
mmc2 = &sdhi1; |
| 26 |
}; |
| 27 |
|
| 28 |
chosen { |
| 29 |
bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; |
| 30 |
stdout-path = "serial0:115200n8"; |
| 31 |
}; |
| 32 |
|
| 33 |
memory@40000000 { |
| 34 |
device_type = "memory"; |
| 35 |
reg = <0 0x40000000 0 0x40000000>; |
| 36 |
}; |
| 37 |
|
| 38 |
d3_3v: regulator-d3-3v { |
| 39 |
compatible = "regulator-fixed"; |
| 40 |
regulator-name = "D3.3V"; |
| 41 |
regulator-min-microvolt = <3300000>; |
| 42 |
regulator-max-microvolt = <3300000>; |
| 43 |
regulator-boot-on; |
| 44 |
regulator-always-on; |
| 45 |
}; |
| 46 |
|
| 47 |
vcc_sdhi0: regulator-vcc-sdhi0 { |
| 48 |
compatible = "regulator-fixed"; |
| 49 |
|
| 50 |
regulator-name = "SDHI0 Vcc"; |
| 51 |
regulator-min-microvolt = <3300000>; |
| 52 |
regulator-max-microvolt = <3300000>; |
| 53 |
|
| 54 |
gpio = <&gpio2 26 GPIO_ACTIVE_HIGH>; |
| 55 |
enable-active-high; |
| 56 |
}; |
| 57 |
|
| 58 |
vccq_sdhi0: regulator-vccq-sdhi0 { |
| 59 |
compatible = "regulator-gpio"; |
| 60 |
|
| 61 |
regulator-name = "SDHI0 VccQ"; |
| 62 |
regulator-min-microvolt = <1800000>; |
| 63 |
regulator-max-microvolt = <3300000>; |
| 64 |
|
| 65 |
gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; |
| 66 |
gpios-states = <1>; |
| 67 |
states = <3300000 1>, <1800000 0>; |
| 68 |
}; |
| 69 |
|
| 70 |
vcc_sdhi1: regulator-vcc-sdhi1 { |
| 71 |
compatible = "regulator-fixed"; |
| 72 |
|
| 73 |
regulator-name = "SDHI1 Vcc"; |
| 74 |
regulator-min-microvolt = <3300000>; |
| 75 |
regulator-max-microvolt = <3300000>; |
| 76 |
|
| 77 |
gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>; |
| 78 |
enable-active-high; |
| 79 |
}; |
| 80 |
|
| 81 |
vccq_sdhi1: regulator-vccq-sdhi1 { |
| 82 |
compatible = "regulator-gpio"; |
| 83 |
|
| 84 |
regulator-name = "SDHI1 VccQ"; |
| 85 |
regulator-min-microvolt = <1800000>; |
| 86 |
regulator-max-microvolt = <3300000>; |
| 87 |
|
| 88 |
gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; |
| 89 |
gpios-states = <1>; |
| 90 |
states = <3300000 1>, <1800000 0>; |
| 91 |
}; |
| 92 |
|
| 93 |
keyboard { |
| 94 |
compatible = "gpio-keys"; |
| 95 |
|
| 96 |
pinctrl-0 = <&keyboard_pins>; |
| 97 |
pinctrl-names = "default"; |
| 98 |
|
| 99 |
key-1 { |
| 100 |
linux,code = <KEY_1>; |
| 101 |
label = "SW2-1"; |
| 102 |
wakeup-source; |
| 103 |
debounce-interval = <20>; |
| 104 |
gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; |
| 105 |
}; |
| 106 |
key-2 { |
| 107 |
linux,code = <KEY_2>; |
| 108 |
label = "SW2-2"; |
| 109 |
wakeup-source; |
| 110 |
debounce-interval = <20>; |
| 111 |
gpios = <&gpio3 10 GPIO_ACTIVE_LOW>; |
| 112 |
}; |
| 113 |
key-3 { |
| 114 |
linux,code = <KEY_3>; |
| 115 |
label = "SW2-3"; |
| 116 |
wakeup-source; |
| 117 |
debounce-interval = <20>; |
| 118 |
gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; |
| 119 |
}; |
| 120 |
key-4 { |
| 121 |
linux,code = <KEY_4>; |
| 122 |
label = "SW2-4"; |
| 123 |
wakeup-source; |
| 124 |
debounce-interval = <20>; |
| 125 |
gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; |
| 126 |
}; |
| 127 |
}; |
| 128 |
|
| 129 |
vga-encoder { |
| 130 |
compatible = "adi,adv7123"; |
| 131 |
|
| 132 |
ports { |
| 133 |
#address-cells = <1>; |
| 134 |
#size-cells = <0>; |
| 135 |
|
| 136 |
port@0 { |
| 137 |
reg = <0>; |
| 138 |
adv7123_in: endpoint { |
| 139 |
remote-endpoint = <&du_out_rgb1>; |
| 140 |
}; |
| 141 |
}; |
| 142 |
port@1 { |
| 143 |
reg = <1>; |
| 144 |
adv7123_out: endpoint { |
| 145 |
remote-endpoint = <&vga_in>; |
| 146 |
}; |
| 147 |
}; |
| 148 |
}; |
| 149 |
}; |
| 150 |
|
| 151 |
vga { |
| 152 |
compatible = "vga-connector"; |
| 153 |
|
| 154 |
port { |
| 155 |
vga_in: endpoint { |
| 156 |
remote-endpoint = <&adv7123_out>; |
| 157 |
}; |
| 158 |
}; |
| 159 |
}; |
| 160 |
|
| 161 |
x2_clk: x2-clock { |
| 162 |
compatible = "fixed-clock"; |
| 163 |
#clock-cells = <0>; |
| 164 |
clock-frequency = <74250000>; |
| 165 |
}; |
| 166 |
|
| 167 |
x13_clk: x13-clock { |
| 168 |
compatible = "fixed-clock"; |
| 169 |
#clock-cells = <0>; |
| 170 |
clock-frequency = <148500000>; |
| 171 |
}; |
| 172 |
|
| 173 |
gpioi2c1: i2c-9 { |
| 174 |
#address-cells = <1>; |
| 175 |
#size-cells = <0>; |
| 176 |
compatible = "i2c-gpio"; |
| 177 |
status = "disabled"; |
| 178 |
scl-gpios = <&gpio4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 179 |
sda-gpios = <&gpio4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 180 |
}; |
| 181 |
|
| 182 |
gpioi2c4: i2c-10 { |
| 183 |
#address-cells = <1>; |
| 184 |
#size-cells = <0>; |
| 185 |
compatible = "i2c-gpio"; |
| 186 |
status = "disabled"; |
| 187 |
scl-gpios = <&gpio4 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 188 |
sda-gpios = <&gpio4 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 189 |
i2c-gpio,delay-us = <5>; |
| 190 |
}; |
| 191 |
|
| 192 |
/* |
| 193 |
* A fallback to GPIO is provided for I2C1. |
| 194 |
*/ |
| 195 |
i2chdmi: i2c-mux1 { |
| 196 |
compatible = "i2c-demux-pinctrl"; |
| 197 |
i2c-parent = <&i2c1>, <&gpioi2c1>; |
| 198 |
i2c-bus-name = "i2c-hdmi"; |
| 199 |
#address-cells = <1>; |
| 200 |
#size-cells = <0>; |
| 201 |
|
| 202 |
composite-in@20 { |
| 203 |
compatible = "adi,adv7180"; |
| 204 |
reg = <0x20>; |
| 205 |
|
| 206 |
port { |
| 207 |
adv7180: endpoint { |
| 208 |
bus-width = <8>; |
| 209 |
remote-endpoint = <&vin0ep>; |
| 210 |
}; |
| 211 |
}; |
| 212 |
}; |
| 213 |
|
| 214 |
eeprom@50 { |
| 215 |
compatible = "renesas,r1ex24002", "atmel,24c02"; |
| 216 |
reg = <0x50>; |
| 217 |
pagesize = <16>; |
| 218 |
}; |
| 219 |
}; |
| 220 |
|
| 221 |
/* |
| 222 |
* I2C4 is routed to EXIO connector B, pins 73 (SCL) + 74 (SDA). |
| 223 |
* A fallback to GPIO is provided. |
| 224 |
*/ |
| 225 |
i2cexio4: i2c-mux2 { |
| 226 |
compatible = "i2c-demux-pinctrl"; |
| 227 |
i2c-parent = <&i2c4>, <&gpioi2c4>; |
| 228 |
i2c-bus-name = "i2c-exio4"; |
| 229 |
#address-cells = <1>; |
| 230 |
#size-cells = <0>; |
| 231 |
}; |
| 232 |
}; |
| 233 |
|
| 234 |
&pci0 { |
| 235 |
status = "okay"; |
| 236 |
pinctrl-0 = <&usb0_pins>; |
| 237 |
pinctrl-names = "default"; |
| 238 |
}; |
| 239 |
|
| 240 |
&pci1 { |
| 241 |
status = "okay"; |
| 242 |
pinctrl-0 = <&usb1_pins>; |
| 243 |
pinctrl-names = "default"; |
| 244 |
}; |
| 245 |
|
| 246 |
&usbphy { |
| 247 |
status = "okay"; |
| 248 |
}; |
| 249 |
|
| 250 |
&du { |
| 251 |
pinctrl-0 = <&du_pins>; |
| 252 |
pinctrl-names = "default"; |
| 253 |
status = "okay"; |
| 254 |
|
| 255 |
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, |
| 256 |
<&x13_clk>, <&x2_clk>; |
| 257 |
clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1"; |
| 258 |
|
| 259 |
ports { |
| 260 |
port@1 { |
| 261 |
endpoint { |
| 262 |
remote-endpoint = <&adv7123_in>; |
| 263 |
}; |
| 264 |
}; |
| 265 |
}; |
| 266 |
}; |
| 267 |
|
| 268 |
&extal_clk { |
| 269 |
clock-frequency = <20000000>; |
| 270 |
}; |
| 271 |
|
| 272 |
&pfc { |
| 273 |
pinctrl-0 = <&scif_clk_pins>; |
| 274 |
pinctrl-names = "default"; |
| 275 |
|
| 276 |
du_pins: du { |
| 277 |
groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out"; |
| 278 |
function = "du1"; |
| 279 |
}; |
| 280 |
|
| 281 |
scif2_pins: scif2 { |
| 282 |
groups = "scif2_data"; |
| 283 |
function = "scif2"; |
| 284 |
}; |
| 285 |
|
| 286 |
scif_clk_pins: scif_clk { |
| 287 |
groups = "scif_clk"; |
| 288 |
function = "scif_clk"; |
| 289 |
}; |
| 290 |
|
| 291 |
ether_pins: ether { |
| 292 |
groups = "eth_link", "eth_mdio", "eth_rmii"; |
| 293 |
function = "eth"; |
| 294 |
}; |
| 295 |
|
| 296 |
phy1_pins: phy1 { |
| 297 |
groups = "intc_irq8"; |
| 298 |
function = "intc"; |
| 299 |
}; |
| 300 |
|
| 301 |
i2c1_pins: i2c1 { |
| 302 |
groups = "i2c1"; |
| 303 |
function = "i2c1"; |
| 304 |
}; |
| 305 |
|
| 306 |
i2c4_pins: i2c4 { |
| 307 |
groups = "i2c4"; |
| 308 |
function = "i2c4"; |
| 309 |
}; |
| 310 |
|
| 311 |
vin0_pins: vin0 { |
| 312 |
groups = "vin0_data8", "vin0_clk"; |
| 313 |
function = "vin0"; |
| 314 |
}; |
| 315 |
|
| 316 |
mmcif0_pins: mmcif0 { |
| 317 |
groups = "mmc_data8", "mmc_ctrl"; |
| 318 |
function = "mmc"; |
| 319 |
}; |
| 320 |
|
| 321 |
sdhi0_pins: sd0 { |
| 322 |
groups = "sdhi0_data4", "sdhi0_ctrl"; |
| 323 |
function = "sdhi0"; |
| 324 |
power-source = <3300>; |
| 325 |
}; |
| 326 |
|
| 327 |
sdhi0_pins_uhs: sd0_uhs { |
| 328 |
groups = "sdhi0_data4", "sdhi0_ctrl"; |
| 329 |
function = "sdhi0"; |
| 330 |
power-source = <1800>; |
| 331 |
}; |
| 332 |
|
| 333 |
sdhi1_pins: sd1 { |
| 334 |
groups = "sdhi1_data4", "sdhi1_ctrl"; |
| 335 |
function = "sdhi1"; |
| 336 |
power-source = <3300>; |
| 337 |
}; |
| 338 |
|
| 339 |
sdhi1_pins_uhs: sd1_uhs { |
| 340 |
groups = "sdhi1_data4", "sdhi1_ctrl"; |
| 341 |
function = "sdhi1"; |
| 342 |
power-source = <1800>; |
| 343 |
}; |
| 344 |
|
| 345 |
usb0_pins: usb0 { |
| 346 |
groups = "usb0"; |
| 347 |
function = "usb0"; |
| 348 |
}; |
| 349 |
|
| 350 |
usb1_pins: usb1 { |
| 351 |
groups = "usb1"; |
| 352 |
function = "usb1"; |
| 353 |
}; |
| 354 |
|
| 355 |
keyboard_pins: keyboard { |
| 356 |
pins = "GP_3_9", "GP_3_10", "GP_3_11", "GP_3_12"; |
| 357 |
bias-pull-up; |
| 358 |
}; |
| 359 |
}; |
| 360 |
|
| 361 |
&cmt0 { |
| 362 |
status = "okay"; |
| 363 |
}; |
| 364 |
|
| 365 |
&pfc { |
| 366 |
qspi_pins: qspi { |
| 367 |
groups = "qspi_ctrl", "qspi_data4"; |
| 368 |
function = "qspi"; |
| 369 |
}; |
| 370 |
}; |
| 371 |
|
| 372 |
ðer { |
| 373 |
pinctrl-0 = <ðer_pins>, <&phy1_pins>; |
| 374 |
pinctrl-names = "default"; |
| 375 |
|
| 376 |
phy-handle = <&phy1>; |
| 377 |
renesas,ether-link-active-low; |
| 378 |
status = "okay"; |
| 379 |
|
| 380 |
phy1: ethernet-phy@1 { |
| 381 |
compatible = "ethernet-phy-id0022.1537", |
| 382 |
"ethernet-phy-ieee802.3-c22"; |
| 383 |
reg = <1>; |
| 384 |
interrupts-extended = <&irqc0 8 IRQ_TYPE_LEVEL_LOW>; |
| 385 |
micrel,led-mode = <1>; |
| 386 |
reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; |
| 387 |
}; |
| 388 |
}; |
| 389 |
|
| 390 |
&mmcif0 { |
| 391 |
pinctrl-0 = <&mmcif0_pins>; |
| 392 |
pinctrl-names = "default"; |
| 393 |
|
| 394 |
vmmc-supply = <&d3_3v>; |
| 395 |
vqmmc-supply = <&d3_3v>; |
| 396 |
bus-width = <8>; |
| 397 |
non-removable; |
| 398 |
status = "okay"; |
| 399 |
}; |
| 400 |
|
| 401 |
&rwdt { |
| 402 |
timeout-sec = <60>; |
| 403 |
status = "okay"; |
| 404 |
}; |
| 405 |
|
| 406 |
&sdhi0 { |
| 407 |
pinctrl-0 = <&sdhi0_pins>; |
| 408 |
pinctrl-1 = <&sdhi0_pins_uhs>; |
| 409 |
pinctrl-names = "default", "state_uhs"; |
| 410 |
|
| 411 |
vmmc-supply = <&vcc_sdhi0>; |
| 412 |
vqmmc-supply = <&vccq_sdhi0>; |
| 413 |
cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; |
| 414 |
wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; |
| 415 |
sd-uhs-sdr50; |
| 416 |
sd-uhs-sdr104; |
| 417 |
status = "okay"; |
| 418 |
}; |
| 419 |
|
| 420 |
&sdhi1 { |
| 421 |
pinctrl-0 = <&sdhi1_pins>; |
| 422 |
pinctrl-1 = <&sdhi1_pins_uhs>; |
| 423 |
pinctrl-names = "default", "state_uhs"; |
| 424 |
|
| 425 |
vmmc-supply = <&vcc_sdhi1>; |
| 426 |
vqmmc-supply = <&vccq_sdhi1>; |
| 427 |
cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; |
| 428 |
wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; |
| 429 |
sd-uhs-sdr50; |
| 430 |
status = "okay"; |
| 431 |
}; |
| 432 |
|
| 433 |
&i2c1 { |
| 434 |
pinctrl-0 = <&i2c1_pins>; |
| 435 |
pinctrl-names = "i2c-hdmi"; |
| 436 |
|
| 437 |
clock-frequency = <400000>; |
| 438 |
}; |
| 439 |
|
| 440 |
&i2c4 { |
| 441 |
pinctrl-0 = <&i2c4_pins>; |
| 442 |
pinctrl-names = "i2c-exio4"; |
| 443 |
}; |
| 444 |
|
| 445 |
&i2c7 { |
| 446 |
status = "okay"; |
| 447 |
clock-frequency = <100000>; |
| 448 |
|
| 449 |
pmic@58 { |
| 450 |
compatible = "dlg,da9063"; |
| 451 |
reg = <0x58>; |
| 452 |
interrupts-extended = <&gpio3 31 IRQ_TYPE_LEVEL_LOW>; |
| 453 |
interrupt-controller; |
| 454 |
#interrupt-cells = <2>; |
| 455 |
|
| 456 |
rtc { |
| 457 |
compatible = "dlg,da9063-rtc"; |
| 458 |
}; |
| 459 |
|
| 460 |
watchdog { |
| 461 |
compatible = "dlg,da9063-watchdog"; |
| 462 |
}; |
| 463 |
}; |
| 464 |
}; |
| 465 |
|
| 466 |
&vin0 { |
| 467 |
status = "okay"; |
| 468 |
pinctrl-0 = <&vin0_pins>; |
| 469 |
pinctrl-names = "default"; |
| 470 |
|
| 471 |
port { |
| 472 |
vin0ep: endpoint { |
| 473 |
remote-endpoint = <&adv7180>; |
| 474 |
bus-width = <8>; |
| 475 |
}; |
| 476 |
}; |
| 477 |
}; |
| 478 |
|
| 479 |
&scif2 { |
| 480 |
pinctrl-0 = <&scif2_pins>; |
| 481 |
pinctrl-names = "default"; |
| 482 |
bootph-all; |
| 483 |
|
| 484 |
status = "okay"; |
| 485 |
}; |
| 486 |
|
| 487 |
&scif_clk { |
| 488 |
clock-frequency = <14745600>; |
| 489 |
}; |
| 490 |
|
| 491 |
&qspi { |
| 492 |
pinctrl-0 = <&qspi_pins>; |
| 493 |
pinctrl-names = "default"; |
| 494 |
|
| 495 |
status = "okay"; |
| 496 |
|
| 497 |
flash@0 { |
| 498 |
compatible = "spansion,s25fl512s", "jedec,spi-nor"; |
| 499 |
reg = <0>; |
| 500 |
spi-max-frequency = <30000000>; |
| 501 |
spi-tx-bus-width = <4>; |
| 502 |
spi-rx-bus-width = <4>; |
| 503 |
spi-cpol; |
| 504 |
spi-cpha; |
| 505 |
m25p,fast-read; |
| 506 |
|
| 507 |
partitions { |
| 508 |
compatible = "fixed-partitions"; |
| 509 |
#address-cells = <1>; |
| 510 |
#size-cells = <1>; |
| 511 |
|
| 512 |
partition@0 { |
| 513 |
label = "loader"; |
| 514 |
reg = <0x00000000 0x00040000>; |
| 515 |
read-only; |
| 516 |
}; |
| 517 |
partition@40000 { |
| 518 |
label = "system"; |
| 519 |
reg = <0x00040000 0x00040000>; |
| 520 |
read-only; |
| 521 |
}; |
| 522 |
partition@80000 { |
| 523 |
label = "user"; |
| 524 |
reg = <0x00080000 0x03f80000>; |
| 525 |
}; |
| 526 |
}; |
| 527 |
}; |
| 528 |
}; |