| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Device Tree Source for the APE6EVM board |
| 4 |
* |
| 5 |
* Copyright (C) 2013 Renesas Solutions Corp. |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
#include "r8a73a4.dtsi" |
| 10 |
#include <dt-bindings/gpio/gpio.h> |
| 11 |
#include <dt-bindings/input/input.h> |
| 12 |
|
| 13 |
/ { |
| 14 |
model = "APE6EVM"; |
| 15 |
compatible = "renesas,ape6evm", "renesas,r8a73a4"; |
| 16 |
|
| 17 |
aliases { |
| 18 |
serial0 = &scifa0; |
| 19 |
}; |
| 20 |
|
| 21 |
chosen { |
| 22 |
bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; |
| 23 |
stdout-path = "serial0:115200n8"; |
| 24 |
}; |
| 25 |
|
| 26 |
memory@40000000 { |
| 27 |
device_type = "memory"; |
| 28 |
reg = <0 0x40000000 0 0x40000000>; |
| 29 |
}; |
| 30 |
|
| 31 |
memory@200000000 { |
| 32 |
device_type = "memory"; |
| 33 |
reg = <2 0x00000000 0 0x40000000>; |
| 34 |
}; |
| 35 |
|
| 36 |
vcc_mmc0: regulator-mmc0 { |
| 37 |
compatible = "regulator-fixed"; |
| 38 |
regulator-name = "MMC0 Vcc"; |
| 39 |
regulator-min-microvolt = <2800000>; |
| 40 |
regulator-max-microvolt = <2800000>; |
| 41 |
regulator-always-on; |
| 42 |
}; |
| 43 |
|
| 44 |
vcc_sdhi0: regulator-sdhi0 { |
| 45 |
compatible = "regulator-fixed"; |
| 46 |
|
| 47 |
regulator-name = "SDHI0 Vcc"; |
| 48 |
regulator-min-microvolt = <3300000>; |
| 49 |
regulator-max-microvolt = <3300000>; |
| 50 |
|
| 51 |
gpio = <&pfc 76 GPIO_ACTIVE_HIGH>; |
| 52 |
enable-active-high; |
| 53 |
}; |
| 54 |
|
| 55 |
/* Common 1.8V and 3.3V rails, used by several devices on APE6EVM */ |
| 56 |
ape6evm_fixed_1v8: regulator-1v8 { |
| 57 |
compatible = "regulator-fixed"; |
| 58 |
regulator-name = "1V8"; |
| 59 |
regulator-min-microvolt = <1800000>; |
| 60 |
regulator-max-microvolt = <1800000>; |
| 61 |
regulator-always-on; |
| 62 |
}; |
| 63 |
|
| 64 |
ape6evm_fixed_3v3: regulator-3v3 { |
| 65 |
compatible = "regulator-fixed"; |
| 66 |
regulator-name = "3V3"; |
| 67 |
regulator-min-microvolt = <3300000>; |
| 68 |
regulator-max-microvolt = <3300000>; |
| 69 |
regulator-always-on; |
| 70 |
}; |
| 71 |
|
| 72 |
leds { |
| 73 |
compatible = "gpio-leds"; |
| 74 |
led1 { |
| 75 |
gpios = <&pfc 28 GPIO_ACTIVE_HIGH>; |
| 76 |
label = "GNSS_EN"; |
| 77 |
}; |
| 78 |
led2 { |
| 79 |
gpios = <&pfc 126 GPIO_ACTIVE_HIGH>; |
| 80 |
label = "NFC_NRST"; |
| 81 |
}; |
| 82 |
led3 { |
| 83 |
gpios = <&pfc 132 GPIO_ACTIVE_HIGH>; |
| 84 |
label = "GNSS_NRST"; |
| 85 |
}; |
| 86 |
led4 { |
| 87 |
gpios = <&pfc 232 GPIO_ACTIVE_HIGH>; |
| 88 |
label = "BT_WAKEUP"; |
| 89 |
}; |
| 90 |
led5 { |
| 91 |
gpios = <&pfc 250 GPIO_ACTIVE_HIGH>; |
| 92 |
label = "STROBE"; |
| 93 |
}; |
| 94 |
led6 { |
| 95 |
gpios = <&pfc 288 GPIO_ACTIVE_HIGH>; |
| 96 |
label = "BBRESETOUT"; |
| 97 |
}; |
| 98 |
}; |
| 99 |
|
| 100 |
keyboard { |
| 101 |
compatible = "gpio-keys"; |
| 102 |
|
| 103 |
pinctrl-names = "default"; |
| 104 |
pinctrl-0 = <&keyboard_pins>; |
| 105 |
|
| 106 |
zero-key { |
| 107 |
gpios = <&pfc 324 GPIO_ACTIVE_LOW>; |
| 108 |
linux,code = <KEY_0>; |
| 109 |
label = "S16"; |
| 110 |
wakeup-source; |
| 111 |
}; |
| 112 |
|
| 113 |
menu-key { |
| 114 |
gpios = <&pfc 325 GPIO_ACTIVE_LOW>; |
| 115 |
linux,code = <KEY_MENU>; |
| 116 |
label = "S17"; |
| 117 |
}; |
| 118 |
|
| 119 |
home-key { |
| 120 |
gpios = <&pfc 326 GPIO_ACTIVE_LOW>; |
| 121 |
linux,code = <KEY_HOME>; |
| 122 |
label = "S18"; |
| 123 |
}; |
| 124 |
|
| 125 |
back-key { |
| 126 |
gpios = <&pfc 327 GPIO_ACTIVE_LOW>; |
| 127 |
linux,code = <KEY_BACK>; |
| 128 |
label = "S19"; |
| 129 |
}; |
| 130 |
|
| 131 |
volup-key { |
| 132 |
gpios = <&pfc 328 GPIO_ACTIVE_LOW>; |
| 133 |
linux,code = <KEY_VOLUMEUP>; |
| 134 |
label = "S20"; |
| 135 |
}; |
| 136 |
|
| 137 |
voldown-key { |
| 138 |
gpios = <&pfc 329 GPIO_ACTIVE_LOW>; |
| 139 |
linux,code = <KEY_VOLUMEDOWN>; |
| 140 |
label = "S21"; |
| 141 |
}; |
| 142 |
}; |
| 143 |
}; |
| 144 |
|
| 145 |
&i2c5 { |
| 146 |
status = "okay"; |
| 147 |
vdd_dvfs: regulator@1b { |
| 148 |
compatible = "maxim,max8973"; |
| 149 |
reg = <0x1b>; |
| 150 |
|
| 151 |
regulator-min-microvolt = <935000>; |
| 152 |
regulator-max-microvolt = <1200000>; |
| 153 |
regulator-boot-on; |
| 154 |
regulator-always-on; |
| 155 |
}; |
| 156 |
}; |
| 157 |
|
| 158 |
&cpu0 { |
| 159 |
cpu0-supply = <&vdd_dvfs>; |
| 160 |
operating-points = <1950000 1115000>, /* kHz uV */ |
| 161 |
<1462500 995000>; |
| 162 |
voltage-tolerance = <1>; /* 1% */ |
| 163 |
}; |
| 164 |
|
| 165 |
&bsc { |
| 166 |
flash@0 { |
| 167 |
compatible = "cfi-flash"; |
| 168 |
reg = <0x0 0x08000000>; |
| 169 |
bank-width = <2>; |
| 170 |
|
| 171 |
partitions { |
| 172 |
compatible = "fixed-partitions"; |
| 173 |
#address-cells = <1>; |
| 174 |
#size-cells = <1>; |
| 175 |
|
| 176 |
partition@0 { |
| 177 |
label = "uboot"; |
| 178 |
reg = <0x00000000 0x00040000>; |
| 179 |
read-only; |
| 180 |
}; |
| 181 |
partition@40000 { |
| 182 |
label = "uboot-env"; |
| 183 |
reg = <0x00040000 0x00040000>; |
| 184 |
read-only; |
| 185 |
}; |
| 186 |
partition@80000 { |
| 187 |
label = "flash"; |
| 188 |
reg = <0x00080000 0x07f80000>; |
| 189 |
}; |
| 190 |
}; |
| 191 |
}; |
| 192 |
|
| 193 |
ethernet@8000000 { |
| 194 |
compatible = "smsc,lan9220", "smsc,lan9115"; |
| 195 |
reg = <0x08000000 0x1000>; |
| 196 |
interrupts-extended = <&irqc1 8 IRQ_TYPE_LEVEL_HIGH>; |
| 197 |
phy-mode = "mii"; |
| 198 |
reg-io-width = <4>; |
| 199 |
smsc,irq-active-high; |
| 200 |
smsc,irq-push-pull; |
| 201 |
reset-gpios = <&pfc 270 GPIO_ACTIVE_LOW>; |
| 202 |
vdd33a-supply = <&ape6evm_fixed_3v3>; |
| 203 |
vddvario-supply = <&ape6evm_fixed_1v8>; |
| 204 |
}; |
| 205 |
}; |
| 206 |
|
| 207 |
&cmt1 { |
| 208 |
status = "okay"; |
| 209 |
}; |
| 210 |
|
| 211 |
&extal1_clk { |
| 212 |
clock-frequency = <26000000>; |
| 213 |
}; |
| 214 |
|
| 215 |
&extal2_clk { |
| 216 |
clock-frequency = <48000000>; |
| 217 |
}; |
| 218 |
|
| 219 |
&extalr_clk { |
| 220 |
clock-frequency = <32768>; |
| 221 |
}; |
| 222 |
|
| 223 |
&pfc { |
| 224 |
scifa0_pins: scifa0 { |
| 225 |
groups = "scifa0_data"; |
| 226 |
function = "scifa0"; |
| 227 |
}; |
| 228 |
|
| 229 |
mmc0_pins: mmc0 { |
| 230 |
groups = "mmc0_data8", "mmc0_ctrl"; |
| 231 |
function = "mmc0"; |
| 232 |
}; |
| 233 |
|
| 234 |
sdhi0_pins: sd0 { |
| 235 |
groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; |
| 236 |
function = "sdhi0"; |
| 237 |
}; |
| 238 |
|
| 239 |
sdhi1_pins: sd1 { |
| 240 |
groups = "sdhi1_data4", "sdhi1_ctrl"; |
| 241 |
function = "sdhi1"; |
| 242 |
}; |
| 243 |
|
| 244 |
keyboard_pins: keyboard { |
| 245 |
pins = "PORT324", "PORT325", "PORT326", "PORT327", "PORT328", |
| 246 |
"PORT329"; |
| 247 |
bias-pull-up; |
| 248 |
}; |
| 249 |
}; |
| 250 |
|
| 251 |
&mmcif0 { |
| 252 |
vmmc-supply = <&vcc_mmc0>; |
| 253 |
bus-width = <8>; |
| 254 |
non-removable; |
| 255 |
pinctrl-names = "default"; |
| 256 |
pinctrl-0 = <&mmc0_pins>; |
| 257 |
status = "okay"; |
| 258 |
}; |
| 259 |
|
| 260 |
&scifa0 { |
| 261 |
pinctrl-0 = <&scifa0_pins>; |
| 262 |
pinctrl-names = "default"; |
| 263 |
|
| 264 |
status = "okay"; |
| 265 |
}; |
| 266 |
|
| 267 |
&sdhi0 { |
| 268 |
vmmc-supply = <&vcc_sdhi0>; |
| 269 |
bus-width = <4>; |
| 270 |
disable-wp; |
| 271 |
pinctrl-names = "default"; |
| 272 |
pinctrl-0 = <&sdhi0_pins>; |
| 273 |
status = "okay"; |
| 274 |
}; |
| 275 |
|
| 276 |
&sdhi1 { |
| 277 |
vmmc-supply = <&ape6evm_fixed_3v3>; |
| 278 |
bus-width = <4>; |
| 279 |
broken-cd; |
| 280 |
disable-wp; |
| 281 |
pinctrl-names = "default"; |
| 282 |
pinctrl-0 = <&sdhi1_pins>; |
| 283 |
status = "okay"; |
| 284 |
}; |