| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Device Tree Source for the Porter board |
| 4 |
* |
| 5 |
* Copyright (C) 2015 Cogent Embedded, Inc. |
| 6 |
*/ |
| 7 |
|
| 8 |
/* |
| 9 |
* SSI-AK4642 |
| 10 |
* |
| 11 |
* JP3: 2-1: AK4642 |
| 12 |
* 2-3: ADV7511 |
| 13 |
* |
| 14 |
* This command is required before playback/capture: |
| 15 |
* |
| 16 |
* amixer set "LINEOUT Mixer DACL" on |
| 17 |
*/ |
| 18 |
|
| 19 |
/dts-v1/; |
| 20 |
#include "r8a7791.dtsi" |
| 21 |
#include <dt-bindings/gpio/gpio.h> |
| 22 |
|
| 23 |
/ { |
| 24 |
model = "Porter"; |
| 25 |
compatible = "renesas,porter", "renesas,r8a7791"; |
| 26 |
|
| 27 |
aliases { |
| 28 |
serial0 = &scif0; |
| 29 |
i2c9 = &gpioi2c2; |
| 30 |
i2c10 = &i2chdmi; |
| 31 |
mmc0 = &sdhi0; |
| 32 |
mmc1 = &sdhi2; |
| 33 |
}; |
| 34 |
|
| 35 |
chosen { |
| 36 |
bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; |
| 37 |
stdout-path = "serial0:115200n8"; |
| 38 |
}; |
| 39 |
|
| 40 |
memory@40000000 { |
| 41 |
device_type = "memory"; |
| 42 |
reg = <0 0x40000000 0 0x40000000>; |
| 43 |
}; |
| 44 |
|
| 45 |
memory@200000000 { |
| 46 |
device_type = "memory"; |
| 47 |
reg = <2 0x00000000 0 0x40000000>; |
| 48 |
}; |
| 49 |
|
| 50 |
reg_1p8v: regulator-1v8 { |
| 51 |
compatible = "regulator-fixed"; |
| 52 |
regulator-name = "fixed-1.8V"; |
| 53 |
regulator-min-microvolt = <1800000>; |
| 54 |
regulator-max-microvolt = <1800000>; |
| 55 |
regulator-boot-on; |
| 56 |
regulator-always-on; |
| 57 |
}; |
| 58 |
|
| 59 |
reg_3p3v: regulator-3v3 { |
| 60 |
compatible = "regulator-fixed"; |
| 61 |
regulator-name = "fixed-3.3V"; |
| 62 |
regulator-min-microvolt = <3300000>; |
| 63 |
regulator-max-microvolt = <3300000>; |
| 64 |
regulator-boot-on; |
| 65 |
regulator-always-on; |
| 66 |
}; |
| 67 |
|
| 68 |
vcc_sdhi0: regulator-vcc-sdhi0 { |
| 69 |
compatible = "regulator-fixed"; |
| 70 |
|
| 71 |
regulator-name = "SDHI0 Vcc"; |
| 72 |
regulator-min-microvolt = <3300000>; |
| 73 |
regulator-max-microvolt = <3300000>; |
| 74 |
regulator-always-on; |
| 75 |
}; |
| 76 |
|
| 77 |
vccq_sdhi0: regulator-vccq-sdhi0 { |
| 78 |
compatible = "regulator-gpio"; |
| 79 |
|
| 80 |
regulator-name = "SDHI0 VccQ"; |
| 81 |
regulator-min-microvolt = <1800000>; |
| 82 |
regulator-max-microvolt = <3300000>; |
| 83 |
|
| 84 |
gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>; |
| 85 |
gpios-states = <1>; |
| 86 |
states = <3300000 1>, <1800000 0>; |
| 87 |
}; |
| 88 |
|
| 89 |
vcc_sdhi2: regulator-vcc-sdhi2 { |
| 90 |
compatible = "regulator-fixed"; |
| 91 |
|
| 92 |
regulator-name = "SDHI2 Vcc"; |
| 93 |
regulator-min-microvolt = <3300000>; |
| 94 |
regulator-max-microvolt = <3300000>; |
| 95 |
regulator-always-on; |
| 96 |
}; |
| 97 |
|
| 98 |
vccq_sdhi2: regulator-vccq-sdhi2 { |
| 99 |
compatible = "regulator-gpio"; |
| 100 |
|
| 101 |
regulator-name = "SDHI2 VccQ"; |
| 102 |
regulator-min-microvolt = <1800000>; |
| 103 |
regulator-max-microvolt = <3300000>; |
| 104 |
|
| 105 |
gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; |
| 106 |
gpios-states = <1>; |
| 107 |
states = <3300000 1>, <1800000 0>; |
| 108 |
}; |
| 109 |
|
| 110 |
hdmi-out { |
| 111 |
compatible = "hdmi-connector"; |
| 112 |
type = "a"; |
| 113 |
|
| 114 |
port { |
| 115 |
hdmi_con: endpoint { |
| 116 |
remote-endpoint = <&adv7511_out>; |
| 117 |
}; |
| 118 |
}; |
| 119 |
}; |
| 120 |
|
| 121 |
x3_clk: x3-clock { |
| 122 |
compatible = "fixed-clock"; |
| 123 |
#clock-cells = <0>; |
| 124 |
clock-frequency = <148500000>; |
| 125 |
}; |
| 126 |
|
| 127 |
x16_clk: x16-clock { |
| 128 |
compatible = "fixed-clock"; |
| 129 |
#clock-cells = <0>; |
| 130 |
clock-frequency = <74250000>; |
| 131 |
}; |
| 132 |
|
| 133 |
x14_clk: audio_clock { |
| 134 |
compatible = "fixed-clock"; |
| 135 |
#clock-cells = <0>; |
| 136 |
clock-frequency = <11289600>; |
| 137 |
}; |
| 138 |
|
| 139 |
sound { |
| 140 |
compatible = "simple-audio-card"; |
| 141 |
|
| 142 |
simple-audio-card,format = "left_j"; |
| 143 |
simple-audio-card,bitclock-master = <&soundcodec>; |
| 144 |
simple-audio-card,frame-master = <&soundcodec>; |
| 145 |
|
| 146 |
simple-audio-card,cpu { |
| 147 |
sound-dai = <&rcar_sound>; |
| 148 |
}; |
| 149 |
|
| 150 |
soundcodec: simple-audio-card,codec { |
| 151 |
sound-dai = <&ak4642>; |
| 152 |
clocks = <&x14_clk>; |
| 153 |
}; |
| 154 |
}; |
| 155 |
|
| 156 |
gpioi2c2: i2c-9 { |
| 157 |
#address-cells = <1>; |
| 158 |
#size-cells = <0>; |
| 159 |
compatible = "i2c-gpio"; |
| 160 |
status = "disabled"; |
| 161 |
scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 162 |
sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 163 |
i2c-gpio,delay-us = <5>; |
| 164 |
}; |
| 165 |
|
| 166 |
/* |
| 167 |
* A fallback to GPIO is provided for I2C2. |
| 168 |
*/ |
| 169 |
i2chdmi: i2c-mux1 { |
| 170 |
compatible = "i2c-demux-pinctrl"; |
| 171 |
i2c-parent = <&i2c2>, <&gpioi2c2>; |
| 172 |
i2c-bus-name = "i2c-hdmi"; |
| 173 |
#address-cells = <1>; |
| 174 |
#size-cells = <0>; |
| 175 |
|
| 176 |
ak4642: codec@12 { |
| 177 |
compatible = "asahi-kasei,ak4642"; |
| 178 |
#sound-dai-cells = <0>; |
| 179 |
reg = <0x12>; |
| 180 |
}; |
| 181 |
|
| 182 |
composite-in@20 { |
| 183 |
compatible = "adi,adv7180"; |
| 184 |
reg = <0x20>; |
| 185 |
|
| 186 |
port { |
| 187 |
adv7180: endpoint { |
| 188 |
bus-width = <8>; |
| 189 |
remote-endpoint = <&vin0ep>; |
| 190 |
}; |
| 191 |
}; |
| 192 |
}; |
| 193 |
|
| 194 |
hdmi@39 { |
| 195 |
compatible = "adi,adv7511w"; |
| 196 |
reg = <0x39>; |
| 197 |
interrupts-extended = <&gpio3 29 IRQ_TYPE_LEVEL_LOW>; |
| 198 |
|
| 199 |
avdd-supply = <®_1p8v>; |
| 200 |
dvdd-supply = <®_1p8v>; |
| 201 |
pvdd-supply = <®_1p8v>; |
| 202 |
dvdd-3v-supply = <®_3p3v>; |
| 203 |
bgvdd-supply = <®_1p8v>; |
| 204 |
|
| 205 |
adi,input-depth = <8>; |
| 206 |
adi,input-colorspace = "rgb"; |
| 207 |
adi,input-clock = "1x"; |
| 208 |
|
| 209 |
ports { |
| 210 |
#address-cells = <1>; |
| 211 |
#size-cells = <0>; |
| 212 |
|
| 213 |
port@0 { |
| 214 |
reg = <0>; |
| 215 |
adv7511_in: endpoint { |
| 216 |
remote-endpoint = <&du_out_rgb>; |
| 217 |
}; |
| 218 |
}; |
| 219 |
|
| 220 |
port@1 { |
| 221 |
reg = <1>; |
| 222 |
adv7511_out: endpoint { |
| 223 |
remote-endpoint = <&hdmi_con>; |
| 224 |
}; |
| 225 |
}; |
| 226 |
}; |
| 227 |
}; |
| 228 |
}; |
| 229 |
}; |
| 230 |
|
| 231 |
&extal_clk { |
| 232 |
clock-frequency = <20000000>; |
| 233 |
}; |
| 234 |
|
| 235 |
&pfc { |
| 236 |
scif0_pins: scif0 { |
| 237 |
groups = "scif0_data_d"; |
| 238 |
function = "scif0"; |
| 239 |
}; |
| 240 |
|
| 241 |
ether_pins: ether { |
| 242 |
groups = "eth_link", "eth_mdio", "eth_rmii"; |
| 243 |
function = "eth"; |
| 244 |
}; |
| 245 |
|
| 246 |
phy1_pins: phy1 { |
| 247 |
groups = "intc_irq0"; |
| 248 |
function = "intc"; |
| 249 |
}; |
| 250 |
|
| 251 |
pmic_irq_pins: pmicirq { |
| 252 |
groups = "intc_irq2"; |
| 253 |
function = "intc"; |
| 254 |
}; |
| 255 |
|
| 256 |
sdhi0_pins: sd0 { |
| 257 |
groups = "sdhi0_data4", "sdhi0_ctrl"; |
| 258 |
function = "sdhi0"; |
| 259 |
}; |
| 260 |
|
| 261 |
sdhi2_pins: sd2 { |
| 262 |
groups = "sdhi2_data4", "sdhi2_ctrl"; |
| 263 |
function = "sdhi2"; |
| 264 |
}; |
| 265 |
|
| 266 |
qspi_pins: qspi { |
| 267 |
groups = "qspi_ctrl", "qspi_data4"; |
| 268 |
function = "qspi"; |
| 269 |
}; |
| 270 |
|
| 271 |
i2c2_pins: i2c2 { |
| 272 |
groups = "i2c2"; |
| 273 |
function = "i2c2"; |
| 274 |
}; |
| 275 |
|
| 276 |
usb0_pins: usb0 { |
| 277 |
groups = "usb0"; |
| 278 |
function = "usb0"; |
| 279 |
}; |
| 280 |
|
| 281 |
usb1_pins: usb1 { |
| 282 |
groups = "usb1"; |
| 283 |
function = "usb1"; |
| 284 |
}; |
| 285 |
|
| 286 |
vin0_pins: vin0 { |
| 287 |
groups = "vin0_data8", "vin0_clk"; |
| 288 |
function = "vin0"; |
| 289 |
}; |
| 290 |
|
| 291 |
can0_pins: can0 { |
| 292 |
groups = "can0_data_b"; |
| 293 |
function = "can0"; |
| 294 |
}; |
| 295 |
|
| 296 |
du_pins: du { |
| 297 |
groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; |
| 298 |
function = "du"; |
| 299 |
}; |
| 300 |
|
| 301 |
ssi_pins: sound { |
| 302 |
groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; |
| 303 |
function = "ssi"; |
| 304 |
}; |
| 305 |
|
| 306 |
audio_clk_pins: audio_clk { |
| 307 |
groups = "audio_clk_a"; |
| 308 |
function = "audio_clk"; |
| 309 |
}; |
| 310 |
}; |
| 311 |
|
| 312 |
&scif0 { |
| 313 |
pinctrl-0 = <&scif0_pins>; |
| 314 |
pinctrl-names = "default"; |
| 315 |
bootph-all; |
| 316 |
|
| 317 |
status = "okay"; |
| 318 |
}; |
| 319 |
|
| 320 |
ðer { |
| 321 |
pinctrl-0 = <ðer_pins>, <&phy1_pins>; |
| 322 |
pinctrl-names = "default"; |
| 323 |
|
| 324 |
phy-handle = <&phy1>; |
| 325 |
renesas,ether-link-active-low; |
| 326 |
status = "okay"; |
| 327 |
|
| 328 |
phy1: ethernet-phy@1 { |
| 329 |
compatible = "ethernet-phy-id0022.1537", |
| 330 |
"ethernet-phy-ieee802.3-c22"; |
| 331 |
reg = <1>; |
| 332 |
interrupts-extended = <&irqc0 0 IRQ_TYPE_LEVEL_LOW>; |
| 333 |
micrel,led-mode = <1>; |
| 334 |
reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; |
| 335 |
}; |
| 336 |
}; |
| 337 |
|
| 338 |
&sdhi0 { |
| 339 |
pinctrl-0 = <&sdhi0_pins>; |
| 340 |
pinctrl-names = "default"; |
| 341 |
|
| 342 |
vmmc-supply = <&vcc_sdhi0>; |
| 343 |
vqmmc-supply = <&vccq_sdhi0>; |
| 344 |
cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; |
| 345 |
wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; |
| 346 |
status = "okay"; |
| 347 |
}; |
| 348 |
|
| 349 |
&sdhi2 { |
| 350 |
pinctrl-0 = <&sdhi2_pins>; |
| 351 |
pinctrl-names = "default"; |
| 352 |
|
| 353 |
vmmc-supply = <&vcc_sdhi2>; |
| 354 |
vqmmc-supply = <&vccq_sdhi2>; |
| 355 |
cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>; |
| 356 |
status = "okay"; |
| 357 |
}; |
| 358 |
|
| 359 |
&qspi { |
| 360 |
pinctrl-0 = <&qspi_pins>; |
| 361 |
pinctrl-names = "default"; |
| 362 |
|
| 363 |
status = "okay"; |
| 364 |
|
| 365 |
flash@0 { |
| 366 |
compatible = "spansion,s25fl512s", "jedec,spi-nor"; |
| 367 |
reg = <0>; |
| 368 |
spi-max-frequency = <30000000>; |
| 369 |
spi-tx-bus-width = <4>; |
| 370 |
spi-rx-bus-width = <4>; |
| 371 |
m25p,fast-read; |
| 372 |
|
| 373 |
partitions { |
| 374 |
compatible = "fixed-partitions"; |
| 375 |
#address-cells = <1>; |
| 376 |
#size-cells = <1>; |
| 377 |
|
| 378 |
partition@0 { |
| 379 |
label = "loader_prg"; |
| 380 |
reg = <0x00000000 0x00040000>; |
| 381 |
read-only; |
| 382 |
}; |
| 383 |
partition@40000 { |
| 384 |
label = "user_prg"; |
| 385 |
reg = <0x00040000 0x00400000>; |
| 386 |
read-only; |
| 387 |
}; |
| 388 |
partition@440000 { |
| 389 |
label = "flash_fs"; |
| 390 |
reg = <0x00440000 0x03bc0000>; |
| 391 |
}; |
| 392 |
}; |
| 393 |
}; |
| 394 |
}; |
| 395 |
|
| 396 |
&i2c2 { |
| 397 |
pinctrl-0 = <&i2c2_pins>; |
| 398 |
pinctrl-names = "i2c-hdmi"; |
| 399 |
|
| 400 |
clock-frequency = <400000>; |
| 401 |
}; |
| 402 |
|
| 403 |
&i2c6 { |
| 404 |
pinctrl-names = "default"; |
| 405 |
pinctrl-0 = <&pmic_irq_pins>; |
| 406 |
status = "okay"; |
| 407 |
clock-frequency = <100000>; |
| 408 |
|
| 409 |
pmic@5a { |
| 410 |
compatible = "dlg,da9063l"; |
| 411 |
reg = <0x5a>; |
| 412 |
interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; |
| 413 |
interrupt-controller; |
| 414 |
#interrupt-cells = <2>; |
| 415 |
|
| 416 |
watchdog { |
| 417 |
compatible = "dlg,da9063-watchdog"; |
| 418 |
}; |
| 419 |
}; |
| 420 |
|
| 421 |
vdd_dvfs: regulator@68 { |
| 422 |
compatible = "dlg,da9210"; |
| 423 |
reg = <0x68>; |
| 424 |
interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; |
| 425 |
|
| 426 |
regulator-min-microvolt = <1000000>; |
| 427 |
regulator-max-microvolt = <1000000>; |
| 428 |
regulator-boot-on; |
| 429 |
regulator-always-on; |
| 430 |
}; |
| 431 |
}; |
| 432 |
|
| 433 |
&sata0 { |
| 434 |
status = "okay"; |
| 435 |
}; |
| 436 |
|
| 437 |
&cpu0 { |
| 438 |
cpu0-supply = <&vdd_dvfs>; |
| 439 |
}; |
| 440 |
|
| 441 |
/* composite video input */ |
| 442 |
&vin0 { |
| 443 |
status = "okay"; |
| 444 |
pinctrl-0 = <&vin0_pins>; |
| 445 |
pinctrl-names = "default"; |
| 446 |
|
| 447 |
port { |
| 448 |
vin0ep: endpoint { |
| 449 |
remote-endpoint = <&adv7180>; |
| 450 |
bus-width = <8>; |
| 451 |
}; |
| 452 |
}; |
| 453 |
}; |
| 454 |
|
| 455 |
&pci0 { |
| 456 |
pinctrl-0 = <&usb0_pins>; |
| 457 |
pinctrl-names = "default"; |
| 458 |
|
| 459 |
status = "okay"; |
| 460 |
}; |
| 461 |
|
| 462 |
&pci1 { |
| 463 |
pinctrl-0 = <&usb1_pins>; |
| 464 |
pinctrl-names = "default"; |
| 465 |
|
| 466 |
status = "okay"; |
| 467 |
}; |
| 468 |
|
| 469 |
&hsusb { |
| 470 |
pinctrl-0 = <&usb0_pins>; |
| 471 |
pinctrl-names = "default"; |
| 472 |
|
| 473 |
status = "okay"; |
| 474 |
}; |
| 475 |
|
| 476 |
&usbphy { |
| 477 |
status = "okay"; |
| 478 |
}; |
| 479 |
|
| 480 |
&pcie_bus_clk { |
| 481 |
clock-frequency = <100000000>; |
| 482 |
}; |
| 483 |
|
| 484 |
&pciec { |
| 485 |
status = "okay"; |
| 486 |
}; |
| 487 |
|
| 488 |
&can0 { |
| 489 |
pinctrl-0 = <&can0_pins>; |
| 490 |
pinctrl-names = "default"; |
| 491 |
|
| 492 |
status = "okay"; |
| 493 |
}; |
| 494 |
|
| 495 |
&du { |
| 496 |
pinctrl-0 = <&du_pins>; |
| 497 |
pinctrl-names = "default"; |
| 498 |
status = "okay"; |
| 499 |
|
| 500 |
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, |
| 501 |
<&x3_clk>, <&x16_clk>; |
| 502 |
clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1"; |
| 503 |
|
| 504 |
ports { |
| 505 |
port@0 { |
| 506 |
endpoint { |
| 507 |
remote-endpoint = <&adv7511_in>; |
| 508 |
}; |
| 509 |
}; |
| 510 |
}; |
| 511 |
}; |
| 512 |
|
| 513 |
&lvds0 { |
| 514 |
ports { |
| 515 |
port@1 { |
| 516 |
lvds_connector: endpoint { |
| 517 |
}; |
| 518 |
}; |
| 519 |
}; |
| 520 |
}; |
| 521 |
|
| 522 |
&rcar_sound { |
| 523 |
pinctrl-0 = <&ssi_pins>, <&audio_clk_pins>; |
| 524 |
pinctrl-names = "default"; |
| 525 |
status = "okay"; |
| 526 |
|
| 527 |
/* Single DAI */ |
| 528 |
#sound-dai-cells = <0>; |
| 529 |
|
| 530 |
rcar_sound,dai { |
| 531 |
dai0 { |
| 532 |
playback = <&ssi0>; |
| 533 |
capture = <&ssi1>; |
| 534 |
}; |
| 535 |
}; |
| 536 |
}; |
| 537 |
|
| 538 |
&rwdt { |
| 539 |
timeout-sec = <60>; |
| 540 |
status = "okay"; |
| 541 |
}; |
| 542 |
|
| 543 |
&ssi1 { |
| 544 |
shared-pin; |
| 545 |
}; |