Debian Codegraph @

arch/arm/boot/dts/renesas/r8a7792-blanche.dts

raw
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Device Tree Source for the Blanche board
4 *
5 * Copyright (C) 2014 Renesas Electronics Corporation
6 * Copyright (C) 2016 Cogent Embedded, Inc.
7 */
8
9 /dts-v1/;
10 #include "r8a7792.dtsi"
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/input/input.h>
13
14 / {
15 model = "Blanche";
16 compatible = "renesas,blanche", "renesas,r8a7792";
17
18 aliases {
19 serial0 = &scif0;
20 serial1 = &scif3;
21 };
22
23 chosen {
24 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
25 stdout-path = "serial0:115200n8";
26 };
27
28 memory@40000000 {
29 device_type = "memory";
30 reg = <0 0x40000000 0 0x40000000>;
31 };
32
33 d1_8v: regulator-1v8 {
34 compatible = "regulator-fixed";
35 regulator-name = "D1.8V";
36 regulator-min-microvolt = <1800000>;
37 regulator-max-microvolt = <1800000>;
38 regulator-boot-on;
39 regulator-always-on;
40 };
41
42 d3_3v: regulator-3v3 {
43 compatible = "regulator-fixed";
44 regulator-name = "D3.3V";
45 regulator-min-microvolt = <3300000>;
46 regulator-max-microvolt = <3300000>;
47 regulator-boot-on;
48 regulator-always-on;
49 };
50
51 vga-encoder {
52 compatible = "adi,adv7123";
53
54 ports {
55 #address-cells = <1>;
56 #size-cells = <0>;
57
58 port@0 {
59 reg = <0>;
60 adv7123_in: endpoint {
61 remote-endpoint = <&du_out_rgb1>;
62 };
63 };
64 port@1 {
65 reg = <1>;
66 adv7123_out: endpoint {
67 remote-endpoint = <&vga_in>;
68 };
69 };
70 };
71 };
72
73 hdmi-out {
74 compatible = "hdmi-connector";
75 type = "a";
76
77 port {
78 hdmi_con: endpoint {
79 remote-endpoint = <&adv7511_out>;
80 };
81 };
82 };
83
84 vga {
85 compatible = "vga-connector";
86
87 port {
88 vga_in: endpoint {
89 remote-endpoint = <&adv7123_out>;
90 };
91 };
92 };
93
94 x1_clk: x1 {
95 compatible = "fixed-clock";
96 #clock-cells = <0>;
97 clock-frequency = <74250000>;
98 };
99
100 x2_clk: x2 {
101 compatible = "fixed-clock";
102 #clock-cells = <0>;
103 clock-frequency = <65000000>;
104 };
105
106 keyboard {
107 compatible = "gpio-keys";
108
109 pinctrl-0 = <&keyboard_pins>;
110 pinctrl-names = "default";
111
112 key-1 {
113 linux,code = <KEY_1>;
114 label = "SW2-1";
115 wakeup-source;
116 debounce-interval = <20>;
117 gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
118 };
119 key-2 {
120 linux,code = <KEY_2>;
121 label = "SW2-2";
122 wakeup-source;
123 debounce-interval = <20>;
124 gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
125 };
126 key-3 {
127 linux,code = <KEY_3>;
128 label = "SW2-3";
129 wakeup-source;
130 debounce-interval = <20>;
131 gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
132 };
133 key-4 {
134 linux,code = <KEY_4>;
135 label = "SW2-4";
136 wakeup-source;
137 debounce-interval = <20>;
138 gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
139 };
140 key-a {
141 linux,code = <KEY_A>;
142 label = "SW24";
143 wakeup-source;
144 debounce-interval = <20>;
145 gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
146 };
147 key-b {
148 linux,code = <KEY_B>;
149 label = "SW25";
150 wakeup-source;
151 debounce-interval = <20>;
152 gpios = <&gpio11 2 GPIO_ACTIVE_LOW>;
153 };
154 };
155
156 leds {
157 compatible = "gpio-leds";
158
159 led17 {
160 gpios = <&gpio10 10 GPIO_ACTIVE_HIGH>;
161 };
162 led18 {
163 gpios = <&gpio10 11 GPIO_ACTIVE_HIGH>;
164 };
165 led19 {
166 gpios = <&gpio10 12 GPIO_ACTIVE_HIGH>;
167 };
168 led20 {
169 gpios = <&gpio10 23 GPIO_ACTIVE_HIGH>;
170 };
171 };
172
173 vcc_sdhi0: regulator-vcc-sdhi0 {
174 compatible = "regulator-fixed";
175
176 regulator-name = "SDHI0 Vcc";
177 regulator-min-microvolt = <3300000>;
178 regulator-max-microvolt = <3300000>;
179
180 gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>;
181 enable-active-high;
182 };
183 };
184
185 &extal_clk {
186 clock-frequency = <20000000>;
187 };
188
189 &can_clk {
190 clock-frequency = <48000000>;
191 };
192
193 &lbsc {
194 flash@0 {
195 compatible = "cfi-flash";
196 reg = <0x00000000 0x04000000>;
197 pinctrl-0 = <&flash_pins>;
198 pinctrl-names = "default";
199 bank-width = <2>;
200
201 partitions {
202 compatible = "fixed-partitions";
203 #address-cells = <1>;
204 #size-cells = <1>;
205
206 partition@0 {
207 label = "uboot";
208 reg = <0x00000000 0x00040000>;
209 read-only;
210 };
211 partition@40000 {
212 label = "uboot-env";
213 reg = <0x00040000 0x00040000>;
214 read-only;
215 };
216 partition@80000 {
217 label = "flash";
218 reg = <0x00080000 0x03f80000>;
219 };
220 };
221 };
222
223 ethernet@18000000 {
224 compatible = "smsc,lan89218", "smsc,lan9115";
225 reg = <0x18000000 0x100>;
226 phy-mode = "mii";
227 interrupts-extended = <&irqc 0 IRQ_TYPE_EDGE_FALLING>;
228 smsc,irq-push-pull;
229 reg-io-width = <4>;
230 vddvario-supply = <&d3_3v>;
231 vdd33a-supply = <&d3_3v>;
232
233 pinctrl-0 = <&lan89218_pins>;
234 pinctrl-names = "default";
235 };
236 };
237
238 &pfc {
239 scif0_pins: scif0 {
240 groups = "scif0_data";
241 function = "scif0";
242 };
243
244 scif3_pins: scif3 {
245 groups = "scif3_data";
246 function = "scif3";
247 };
248
249 lan89218_pins: lan89218 {
250 intc {
251 groups = "intc_irq0";
252 function = "intc";
253 };
254 lbsc {
255 groups = "lbsc_ex_cs0";
256 function = "lbsc";
257 };
258 };
259
260 can0_pins: can0 {
261 groups = "can0_data", "can_clk";
262 function = "can0";
263 };
264
265 sdhi0_pins: sdhi0 {
266 groups = "sdhi0_data4", "sdhi0_ctrl";
267 function = "sdhi0";
268 };
269
270 du0_pins: du0 {
271 groups = "du0_rgb888", "du0_sync", "du0_disp";
272 function = "du0";
273 };
274
275 du1_pins: du1 {
276 groups = "du1_rgb666", "du1_sync", "du1_disp";
277 function = "du1";
278 };
279
280 flash_pins: flash {
281 groups = "lbsc_cs0";
282 function = "lbsc";
283 };
284
285 keyboard_pins: keyboard {
286 pins = "GP_3_10", "GP_3_11", "GP_3_12", "GP_3_15", "GP_11_2";
287 bias-pull-up;
288 };
289
290 pmic_irq_pins: pmicirq {
291 groups = "intc_irq2";
292 function = "intc";
293 };
294 };
295
296 &rwdt {
297 timeout-sec = <60>;
298 status = "okay";
299 };
300
301 &scif0 {
302 pinctrl-0 = <&scif0_pins>;
303 pinctrl-names = "default";
304 bootph-all;
305
306 status = "okay";
307 };
308
309 &scif3 {
310 pinctrl-0 = <&scif3_pins>;
311 pinctrl-names = "default";
312
313 status = "okay";
314 };
315
316 &can0 {
317 pinctrl-0 = <&can0_pins>;
318 pinctrl-names = "default";
319
320 status = "okay";
321 };
322
323 &sdhi0 {
324 pinctrl-0 = <&sdhi0_pins>;
325 pinctrl-names = "default";
326
327 vmmc-supply = <&vcc_sdhi0>;
328 cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>;
329 status = "okay";
330 };
331
332 &i2c1 {
333 status = "okay";
334 clock-frequency = <400000>;
335
336 hdmi@39 {
337 compatible = "adi,adv7511w";
338 reg = <0x39>;
339 interrupts-extended = <&irqc 3 IRQ_TYPE_EDGE_FALLING>;
340
341 avdd-supply = <&d1_8v>;
342 dvdd-supply = <&d1_8v>;
343 pvdd-supply = <&d1_8v>;
344 dvdd-3v-supply = <&d3_3v>;
345 bgvdd-supply = <&d1_8v>;
346
347 adi,input-depth = <8>;
348 adi,input-colorspace = "rgb";
349 adi,input-clock = "1x";
350
351 ports {
352 #address-cells = <1>;
353 #size-cells = <0>;
354
355 port@0 {
356 reg = <0>;
357 adv7511_in: endpoint {
358 remote-endpoint = <&du_out_rgb0>;
359 };
360 };
361
362 port@1 {
363 reg = <1>;
364 adv7511_out: endpoint {
365 remote-endpoint = <&hdmi_con>;
366 };
367 };
368 };
369 };
370 };
371
372 &iic3 {
373 status = "okay";
374
375 pmic@58 {
376 compatible = "dlg,da9063";
377 reg = <0x58>;
378 pinctrl-names = "default";
379 pinctrl-0 = <&pmic_irq_pins>;
380 interrupts-extended = <&irqc 2 IRQ_TYPE_LEVEL_LOW>;
381 interrupt-controller;
382 #interrupt-cells = <2>;
383
384 rtc {
385 compatible = "dlg,da9063-rtc";
386 };
387
388 watchdog {
389 compatible = "dlg,da9063-watchdog";
390 };
391 };
392 };
393
394 &du {
395 pinctrl-0 = <&du0_pins>, <&du1_pins>;
396 pinctrl-names = "default";
397
398 clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&x1_clk>, <&x2_clk>;
399 clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
400 status = "okay";
401
402 ports {
403 port@0 {
404 endpoint {
405 remote-endpoint = <&adv7511_in>;
406 };
407 };
408 port@1 {
409 endpoint {
410 remote-endpoint = <&adv7123_in>;
411 };
412 };
413 };
414 };