| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Device Tree Source for the Lager board |
| 4 |
* |
| 5 |
* Copyright (C) 2013-2014 Renesas Solutions Corp. |
| 6 |
* Copyright (C) 2014 Cogent Embedded, Inc. |
| 7 |
* Copyright (C) 2015-2016 Renesas Electronics Corporation |
| 8 |
*/ |
| 9 |
|
| 10 |
/* |
| 11 |
* SSI-AK4643 |
| 12 |
* |
| 13 |
* SW1: 1: AK4643 |
| 14 |
* 2: CN22 |
| 15 |
* 3: ADV7511 |
| 16 |
* |
| 17 |
* This command is required when Playback/Capture |
| 18 |
* |
| 19 |
* amixer set "LINEOUT Mixer DACL" on |
| 20 |
* amixer set "DVC Out" 100% |
| 21 |
* amixer set "DVC In" 100% |
| 22 |
* |
| 23 |
* You can use Mute |
| 24 |
* |
| 25 |
* amixer set "DVC Out Mute" on |
| 26 |
* amixer set "DVC In Mute" on |
| 27 |
* |
| 28 |
* You can use Volume Ramp |
| 29 |
* |
| 30 |
* amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps" |
| 31 |
* amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps" |
| 32 |
* amixer set "DVC Out Ramp" on |
| 33 |
* aplay xxx.wav & |
| 34 |
* amixer set "DVC Out" 80% // Volume Down |
| 35 |
* amixer set "DVC Out" 100% // Volume Up |
| 36 |
*/ |
| 37 |
|
| 38 |
/dts-v1/; |
| 39 |
#include "r8a7790.dtsi" |
| 40 |
#include <dt-bindings/gpio/gpio.h> |
| 41 |
#include <dt-bindings/input/input.h> |
| 42 |
|
| 43 |
/ { |
| 44 |
model = "Lager"; |
| 45 |
compatible = "renesas,lager", "renesas,r8a7790"; |
| 46 |
|
| 47 |
aliases { |
| 48 |
serial0 = &scif0; |
| 49 |
serial1 = &scifa1; |
| 50 |
i2c8 = &gpioi2c1; |
| 51 |
i2c9 = &gpioi2c2; |
| 52 |
i2c10 = &i2cexio0; |
| 53 |
i2c11 = &i2cexio1; |
| 54 |
i2c12 = &i2chdmi; |
| 55 |
i2c13 = &i2cpwr; |
| 56 |
mmc0 = &mmcif1; |
| 57 |
mmc1 = &sdhi0; |
| 58 |
mmc2 = &sdhi2; |
| 59 |
}; |
| 60 |
|
| 61 |
chosen { |
| 62 |
bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; |
| 63 |
stdout-path = "serial0:115200n8"; |
| 64 |
}; |
| 65 |
|
| 66 |
memory@40000000 { |
| 67 |
device_type = "memory"; |
| 68 |
reg = <0 0x40000000 0 0x40000000>; |
| 69 |
}; |
| 70 |
|
| 71 |
memory@140000000 { |
| 72 |
device_type = "memory"; |
| 73 |
reg = <1 0x40000000 0 0xc0000000>; |
| 74 |
}; |
| 75 |
|
| 76 |
keyboard { |
| 77 |
compatible = "gpio-keys"; |
| 78 |
|
| 79 |
pinctrl-0 = <&keyboard_pins>; |
| 80 |
pinctrl-names = "default"; |
| 81 |
|
| 82 |
key-1 { |
| 83 |
linux,code = <KEY_1>; |
| 84 |
label = "SW2-1"; |
| 85 |
wakeup-source; |
| 86 |
debounce-interval = <20>; |
| 87 |
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; |
| 88 |
}; |
| 89 |
key-2 { |
| 90 |
linux,code = <KEY_2>; |
| 91 |
label = "SW2-2"; |
| 92 |
wakeup-source; |
| 93 |
debounce-interval = <20>; |
| 94 |
gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; |
| 95 |
}; |
| 96 |
key-3 { |
| 97 |
linux,code = <KEY_3>; |
| 98 |
label = "SW2-3"; |
| 99 |
wakeup-source; |
| 100 |
debounce-interval = <20>; |
| 101 |
gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; |
| 102 |
}; |
| 103 |
key-4 { |
| 104 |
linux,code = <KEY_4>; |
| 105 |
label = "SW2-4"; |
| 106 |
wakeup-source; |
| 107 |
debounce-interval = <20>; |
| 108 |
gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; |
| 109 |
}; |
| 110 |
}; |
| 111 |
|
| 112 |
leds { |
| 113 |
compatible = "gpio-leds"; |
| 114 |
led6 { |
| 115 |
gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; |
| 116 |
}; |
| 117 |
led7 { |
| 118 |
gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>; |
| 119 |
}; |
| 120 |
led8 { |
| 121 |
gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; |
| 122 |
}; |
| 123 |
}; |
| 124 |
|
| 125 |
fixedregulator1v8: regulator-1v8 { |
| 126 |
compatible = "regulator-fixed"; |
| 127 |
regulator-name = "fixed-1.8V"; |
| 128 |
regulator-min-microvolt = <1800000>; |
| 129 |
regulator-max-microvolt = <1800000>; |
| 130 |
regulator-boot-on; |
| 131 |
regulator-always-on; |
| 132 |
}; |
| 133 |
|
| 134 |
fixedregulator3v3: regulator-3v3 { |
| 135 |
compatible = "regulator-fixed"; |
| 136 |
regulator-name = "fixed-3.3V"; |
| 137 |
regulator-min-microvolt = <3300000>; |
| 138 |
regulator-max-microvolt = <3300000>; |
| 139 |
regulator-boot-on; |
| 140 |
regulator-always-on; |
| 141 |
}; |
| 142 |
|
| 143 |
vcc_sdhi0: regulator-vcc-sdhi0 { |
| 144 |
compatible = "regulator-fixed"; |
| 145 |
|
| 146 |
regulator-name = "SDHI0 Vcc"; |
| 147 |
regulator-min-microvolt = <3300000>; |
| 148 |
regulator-max-microvolt = <3300000>; |
| 149 |
|
| 150 |
gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>; |
| 151 |
enable-active-high; |
| 152 |
}; |
| 153 |
|
| 154 |
vccq_sdhi0: regulator-vccq-sdhi0 { |
| 155 |
compatible = "regulator-gpio"; |
| 156 |
|
| 157 |
regulator-name = "SDHI0 VccQ"; |
| 158 |
regulator-min-microvolt = <1800000>; |
| 159 |
regulator-max-microvolt = <3300000>; |
| 160 |
|
| 161 |
gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; |
| 162 |
gpios-states = <1>; |
| 163 |
states = <3300000 1>, <1800000 0>; |
| 164 |
}; |
| 165 |
|
| 166 |
vcc_sdhi2: regulator-vcc-sdhi2 { |
| 167 |
compatible = "regulator-fixed"; |
| 168 |
|
| 169 |
regulator-name = "SDHI2 Vcc"; |
| 170 |
regulator-min-microvolt = <3300000>; |
| 171 |
regulator-max-microvolt = <3300000>; |
| 172 |
|
| 173 |
gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>; |
| 174 |
enable-active-high; |
| 175 |
}; |
| 176 |
|
| 177 |
vccq_sdhi2: regulator-vccq-sdhi2 { |
| 178 |
compatible = "regulator-gpio"; |
| 179 |
|
| 180 |
regulator-name = "SDHI2 VccQ"; |
| 181 |
regulator-min-microvolt = <1800000>; |
| 182 |
regulator-max-microvolt = <3300000>; |
| 183 |
|
| 184 |
gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>; |
| 185 |
gpios-states = <1>; |
| 186 |
states = <3300000 1>, <1800000 0>; |
| 187 |
}; |
| 188 |
|
| 189 |
audio_clock: audio_clock { |
| 190 |
compatible = "fixed-clock"; |
| 191 |
#clock-cells = <0>; |
| 192 |
clock-frequency = <11289600>; |
| 193 |
}; |
| 194 |
|
| 195 |
rsnd_ak4643: sound { |
| 196 |
compatible = "simple-audio-card"; |
| 197 |
|
| 198 |
simple-audio-card,format = "left_j"; |
| 199 |
simple-audio-card,bitclock-master = <&sndcodec>; |
| 200 |
simple-audio-card,frame-master = <&sndcodec>; |
| 201 |
|
| 202 |
sndcpu: simple-audio-card,cpu { |
| 203 |
sound-dai = <&rcar_sound>; |
| 204 |
}; |
| 205 |
|
| 206 |
sndcodec: simple-audio-card,codec { |
| 207 |
sound-dai = <&ak4643>; |
| 208 |
clocks = <&audio_clock>; |
| 209 |
}; |
| 210 |
}; |
| 211 |
|
| 212 |
vga-encoder { |
| 213 |
compatible = "adi,adv7123"; |
| 214 |
|
| 215 |
ports { |
| 216 |
#address-cells = <1>; |
| 217 |
#size-cells = <0>; |
| 218 |
|
| 219 |
port@0 { |
| 220 |
reg = <0>; |
| 221 |
adv7123_in: endpoint { |
| 222 |
remote-endpoint = <&du_out_rgb>; |
| 223 |
}; |
| 224 |
}; |
| 225 |
port@1 { |
| 226 |
reg = <1>; |
| 227 |
adv7123_out: endpoint { |
| 228 |
remote-endpoint = <&vga_in>; |
| 229 |
}; |
| 230 |
}; |
| 231 |
}; |
| 232 |
}; |
| 233 |
|
| 234 |
vga { |
| 235 |
compatible = "vga-connector"; |
| 236 |
|
| 237 |
port { |
| 238 |
vga_in: endpoint { |
| 239 |
remote-endpoint = <&adv7123_out>; |
| 240 |
}; |
| 241 |
}; |
| 242 |
}; |
| 243 |
|
| 244 |
hdmi-in { |
| 245 |
compatible = "hdmi-connector"; |
| 246 |
type = "a"; |
| 247 |
|
| 248 |
port { |
| 249 |
hdmi_con_in: endpoint { |
| 250 |
remote-endpoint = <&adv7612_in>; |
| 251 |
}; |
| 252 |
}; |
| 253 |
}; |
| 254 |
|
| 255 |
cec_clock: cec-clock { |
| 256 |
compatible = "fixed-clock"; |
| 257 |
#clock-cells = <0>; |
| 258 |
clock-frequency = <12000000>; |
| 259 |
}; |
| 260 |
|
| 261 |
hdmi-out { |
| 262 |
compatible = "hdmi-connector"; |
| 263 |
type = "a"; |
| 264 |
|
| 265 |
port { |
| 266 |
hdmi_con_out: endpoint { |
| 267 |
remote-endpoint = <&adv7511_out>; |
| 268 |
}; |
| 269 |
}; |
| 270 |
}; |
| 271 |
|
| 272 |
x2_clk: x2-clock { |
| 273 |
compatible = "fixed-clock"; |
| 274 |
#clock-cells = <0>; |
| 275 |
clock-frequency = <148500000>; |
| 276 |
}; |
| 277 |
|
| 278 |
x13_clk: x13-clock { |
| 279 |
compatible = "fixed-clock"; |
| 280 |
#clock-cells = <0>; |
| 281 |
clock-frequency = <148500000>; |
| 282 |
}; |
| 283 |
|
| 284 |
gpioi2c1: i2c-8 { |
| 285 |
#address-cells = <1>; |
| 286 |
#size-cells = <0>; |
| 287 |
compatible = "i2c-gpio"; |
| 288 |
status = "disabled"; |
| 289 |
scl-gpios = <&gpio1 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 290 |
sda-gpios = <&gpio1 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 291 |
i2c-gpio,delay-us = <5>; |
| 292 |
}; |
| 293 |
|
| 294 |
gpioi2c2: i2c-9 { |
| 295 |
#address-cells = <1>; |
| 296 |
#size-cells = <0>; |
| 297 |
compatible = "i2c-gpio"; |
| 298 |
status = "disabled"; |
| 299 |
scl-gpios = <&gpio5 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 300 |
sda-gpios = <&gpio5 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 301 |
i2c-gpio,delay-us = <5>; |
| 302 |
}; |
| 303 |
|
| 304 |
/* |
| 305 |
* IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only. |
| 306 |
* We use the I2C demuxer, so the desired IP core can be selected at runtime |
| 307 |
* depending on the use case (e.g. DMA with IIC0 or slave support with I2C0). |
| 308 |
* Note: For testing the I2C slave feature, it is convenient to connect this |
| 309 |
* bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and |
| 310 |
* instantiate the slave device at runtime according to the documentation. |
| 311 |
* You can then communicate with the slave via IIC3. |
| 312 |
* |
| 313 |
* IIC0/I2C0 does not appear to support fallback to GPIO. |
| 314 |
*/ |
| 315 |
i2cexio0: i2c-mux1 { |
| 316 |
compatible = "i2c-demux-pinctrl"; |
| 317 |
i2c-parent = <&iic0>, <&i2c0>; |
| 318 |
i2c-bus-name = "i2c-exio0"; |
| 319 |
#address-cells = <1>; |
| 320 |
#size-cells = <0>; |
| 321 |
}; |
| 322 |
|
| 323 |
/* |
| 324 |
* IIC1/I2C1 is routed to EXIO connector A, pins 78 (SCL) + 80 (SDA). |
| 325 |
* This is similar to the arangement described for i2cexio0 (above) |
| 326 |
* with a fallback to GPIO also provided. |
| 327 |
*/ |
| 328 |
i2cexio1: i2c-mux2 { |
| 329 |
compatible = "i2c-demux-pinctrl"; |
| 330 |
i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>; |
| 331 |
i2c-bus-name = "i2c-exio1"; |
| 332 |
#address-cells = <1>; |
| 333 |
#size-cells = <0>; |
| 334 |
}; |
| 335 |
|
| 336 |
/* |
| 337 |
* IIC2 and I2C2 may be switched using pinmux. |
| 338 |
* A fallback to GPIO is also provided. |
| 339 |
*/ |
| 340 |
i2chdmi: i2c-mux3 { |
| 341 |
compatible = "i2c-demux-pinctrl"; |
| 342 |
i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>; |
| 343 |
i2c-bus-name = "i2c-hdmi"; |
| 344 |
#address-cells = <1>; |
| 345 |
#size-cells = <0>; |
| 346 |
|
| 347 |
ak4643: codec@12 { |
| 348 |
compatible = "asahi-kasei,ak4643"; |
| 349 |
#sound-dai-cells = <0>; |
| 350 |
reg = <0x12>; |
| 351 |
}; |
| 352 |
|
| 353 |
composite-in@20 { |
| 354 |
compatible = "adi,adv7180"; |
| 355 |
reg = <0x20>; |
| 356 |
|
| 357 |
port { |
| 358 |
adv7180: endpoint { |
| 359 |
bus-width = <8>; |
| 360 |
remote-endpoint = <&vin1ep0>; |
| 361 |
}; |
| 362 |
}; |
| 363 |
}; |
| 364 |
|
| 365 |
hdmi@39 { |
| 366 |
compatible = "adi,adv7511w"; |
| 367 |
reg = <0x39>; |
| 368 |
interrupts-extended = <&gpio1 15 IRQ_TYPE_LEVEL_LOW>; |
| 369 |
clocks = <&cec_clock>; |
| 370 |
clock-names = "cec"; |
| 371 |
|
| 372 |
avdd-supply = <&fixedregulator1v8>; |
| 373 |
dvdd-supply = <&fixedregulator1v8>; |
| 374 |
pvdd-supply = <&fixedregulator1v8>; |
| 375 |
dvdd-3v-supply = <&fixedregulator3v3>; |
| 376 |
bgvdd-supply = <&fixedregulator1v8>; |
| 377 |
|
| 378 |
adi,input-depth = <8>; |
| 379 |
adi,input-colorspace = "rgb"; |
| 380 |
adi,input-clock = "1x"; |
| 381 |
|
| 382 |
ports { |
| 383 |
#address-cells = <1>; |
| 384 |
#size-cells = <0>; |
| 385 |
|
| 386 |
port@0 { |
| 387 |
reg = <0>; |
| 388 |
adv7511_in: endpoint { |
| 389 |
remote-endpoint = <&lvds0_out>; |
| 390 |
}; |
| 391 |
}; |
| 392 |
|
| 393 |
port@1 { |
| 394 |
reg = <1>; |
| 395 |
adv7511_out: endpoint { |
| 396 |
remote-endpoint = <&hdmi_con_out>; |
| 397 |
}; |
| 398 |
}; |
| 399 |
}; |
| 400 |
}; |
| 401 |
|
| 402 |
hdmi-in@4c { |
| 403 |
compatible = "adi,adv7612"; |
| 404 |
reg = <0x4c>; |
| 405 |
interrupts-extended = <&gpio1 20 IRQ_TYPE_LEVEL_LOW>; |
| 406 |
default-input = <0>; |
| 407 |
|
| 408 |
ports { |
| 409 |
#address-cells = <1>; |
| 410 |
#size-cells = <0>; |
| 411 |
|
| 412 |
port@0 { |
| 413 |
reg = <0>; |
| 414 |
adv7612_in: endpoint { |
| 415 |
remote-endpoint = <&hdmi_con_in>; |
| 416 |
}; |
| 417 |
}; |
| 418 |
|
| 419 |
port@2 { |
| 420 |
reg = <2>; |
| 421 |
adv7612_out: endpoint { |
| 422 |
remote-endpoint = <&vin0ep2>; |
| 423 |
}; |
| 424 |
}; |
| 425 |
}; |
| 426 |
}; |
| 427 |
}; |
| 428 |
|
| 429 |
/* |
| 430 |
* IIC3 and I2C3 may be switched using pinmux. |
| 431 |
* IIC3/I2C3 does not appear to support fallback to GPIO. |
| 432 |
*/ |
| 433 |
i2cpwr: i2c-mux4 { |
| 434 |
compatible = "i2c-demux-pinctrl"; |
| 435 |
pinctrl-names = "default"; |
| 436 |
pinctrl-0 = <&pmic_irq_pins>; |
| 437 |
i2c-parent = <&iic3>, <&i2c3>; |
| 438 |
i2c-bus-name = "i2c-pwr"; |
| 439 |
#address-cells = <1>; |
| 440 |
#size-cells = <0>; |
| 441 |
|
| 442 |
pmic@58 { |
| 443 |
compatible = "dlg,da9063"; |
| 444 |
reg = <0x58>; |
| 445 |
interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; |
| 446 |
interrupt-controller; |
| 447 |
#interrupt-cells = <2>; |
| 448 |
|
| 449 |
rtc { |
| 450 |
compatible = "dlg,da9063-rtc"; |
| 451 |
}; |
| 452 |
|
| 453 |
watchdog { |
| 454 |
compatible = "dlg,da9063-watchdog"; |
| 455 |
}; |
| 456 |
}; |
| 457 |
|
| 458 |
vdd_dvfs: regulator@68 { |
| 459 |
compatible = "dlg,da9210"; |
| 460 |
reg = <0x68>; |
| 461 |
interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>; |
| 462 |
|
| 463 |
regulator-min-microvolt = <1000000>; |
| 464 |
regulator-max-microvolt = <1000000>; |
| 465 |
regulator-boot-on; |
| 466 |
regulator-always-on; |
| 467 |
}; |
| 468 |
}; |
| 469 |
}; |
| 470 |
|
| 471 |
&du { |
| 472 |
pinctrl-0 = <&du_pins>; |
| 473 |
pinctrl-names = "default"; |
| 474 |
status = "okay"; |
| 475 |
|
| 476 |
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, |
| 477 |
<&x13_clk>, <&x2_clk>; |
| 478 |
clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1"; |
| 479 |
|
| 480 |
ports { |
| 481 |
port@0 { |
| 482 |
endpoint { |
| 483 |
remote-endpoint = <&adv7123_in>; |
| 484 |
}; |
| 485 |
}; |
| 486 |
}; |
| 487 |
}; |
| 488 |
|
| 489 |
&lvds0 { |
| 490 |
status = "okay"; |
| 491 |
|
| 492 |
ports { |
| 493 |
port@1 { |
| 494 |
endpoint { |
| 495 |
remote-endpoint = <&adv7511_in>; |
| 496 |
}; |
| 497 |
}; |
| 498 |
}; |
| 499 |
}; |
| 500 |
|
| 501 |
&lvds1 { |
| 502 |
ports { |
| 503 |
port@1 { |
| 504 |
lvds_connector: endpoint { |
| 505 |
}; |
| 506 |
}; |
| 507 |
}; |
| 508 |
}; |
| 509 |
|
| 510 |
&extal_clk { |
| 511 |
clock-frequency = <20000000>; |
| 512 |
}; |
| 513 |
|
| 514 |
&pfc { |
| 515 |
pinctrl-0 = <&scif_clk_pins>; |
| 516 |
pinctrl-names = "default"; |
| 517 |
|
| 518 |
du_pins: du { |
| 519 |
groups = "du_rgb666", "du_sync_1", "du_clk_out_0"; |
| 520 |
function = "du"; |
| 521 |
}; |
| 522 |
|
| 523 |
scif0_pins: scif0 { |
| 524 |
groups = "scif0_data"; |
| 525 |
function = "scif0"; |
| 526 |
}; |
| 527 |
|
| 528 |
scif_clk_pins: scif_clk { |
| 529 |
groups = "scif_clk"; |
| 530 |
function = "scif_clk"; |
| 531 |
}; |
| 532 |
|
| 533 |
ether_pins: ether { |
| 534 |
groups = "eth_link", "eth_mdio", "eth_rmii"; |
| 535 |
function = "eth"; |
| 536 |
}; |
| 537 |
|
| 538 |
phy1_pins: phy1 { |
| 539 |
groups = "intc_irq0"; |
| 540 |
function = "intc"; |
| 541 |
}; |
| 542 |
|
| 543 |
scifa1_pins: scifa1 { |
| 544 |
groups = "scifa1_data"; |
| 545 |
function = "scifa1"; |
| 546 |
}; |
| 547 |
|
| 548 |
sdhi0_pins: sd0 { |
| 549 |
groups = "sdhi0_data4", "sdhi0_ctrl"; |
| 550 |
function = "sdhi0"; |
| 551 |
power-source = <3300>; |
| 552 |
}; |
| 553 |
|
| 554 |
sdhi0_pins_uhs: sd0_uhs { |
| 555 |
groups = "sdhi0_data4", "sdhi0_ctrl"; |
| 556 |
function = "sdhi0"; |
| 557 |
power-source = <1800>; |
| 558 |
}; |
| 559 |
|
| 560 |
sdhi2_pins: sd2 { |
| 561 |
groups = "sdhi2_data4", "sdhi2_ctrl"; |
| 562 |
function = "sdhi2"; |
| 563 |
power-source = <3300>; |
| 564 |
}; |
| 565 |
|
| 566 |
sdhi2_pins_uhs: sd2_uhs { |
| 567 |
groups = "sdhi2_data4", "sdhi2_ctrl"; |
| 568 |
function = "sdhi2"; |
| 569 |
power-source = <1800>; |
| 570 |
}; |
| 571 |
|
| 572 |
mmc1_pins: mmc1 { |
| 573 |
groups = "mmc1_data8", "mmc1_ctrl"; |
| 574 |
function = "mmc1"; |
| 575 |
}; |
| 576 |
|
| 577 |
qspi_pins: qspi { |
| 578 |
groups = "qspi_ctrl", "qspi_data4"; |
| 579 |
function = "qspi"; |
| 580 |
}; |
| 581 |
|
| 582 |
msiof1_pins: msiof1 { |
| 583 |
groups = "msiof1_clk", "msiof1_sync", "msiof1_rx", |
| 584 |
"msiof1_tx"; |
| 585 |
function = "msiof1"; |
| 586 |
}; |
| 587 |
|
| 588 |
i2c0_pins: i2c0 { |
| 589 |
groups = "i2c0"; |
| 590 |
function = "i2c0"; |
| 591 |
}; |
| 592 |
|
| 593 |
iic0_pins: iic0 { |
| 594 |
groups = "iic0"; |
| 595 |
function = "iic0"; |
| 596 |
}; |
| 597 |
|
| 598 |
i2c1_pins: i2c1 { |
| 599 |
groups = "i2c1"; |
| 600 |
function = "i2c1"; |
| 601 |
}; |
| 602 |
|
| 603 |
iic1_pins: iic1 { |
| 604 |
groups = "iic1"; |
| 605 |
function = "iic1"; |
| 606 |
}; |
| 607 |
|
| 608 |
i2c2_pins: i2c2 { |
| 609 |
groups = "i2c2"; |
| 610 |
function = "i2c2"; |
| 611 |
}; |
| 612 |
|
| 613 |
iic2_pins: iic2 { |
| 614 |
groups = "iic2"; |
| 615 |
function = "iic2"; |
| 616 |
}; |
| 617 |
|
| 618 |
i2c3_pins: i2c3 { |
| 619 |
groups = "i2c3"; |
| 620 |
function = "i2c3"; |
| 621 |
}; |
| 622 |
|
| 623 |
iic3_pins: iic3 { |
| 624 |
groups = "iic3"; |
| 625 |
function = "iic3"; |
| 626 |
}; |
| 627 |
|
| 628 |
pmic_irq_pins: pmicirq { |
| 629 |
groups = "intc_irq2"; |
| 630 |
function = "intc"; |
| 631 |
}; |
| 632 |
|
| 633 |
hsusb_pins: hsusb { |
| 634 |
groups = "usb0_ovc_vbus"; |
| 635 |
function = "usb0"; |
| 636 |
}; |
| 637 |
|
| 638 |
usb0_pins: usb0 { |
| 639 |
groups = "usb0"; |
| 640 |
function = "usb0"; |
| 641 |
}; |
| 642 |
|
| 643 |
usb1_pins: usb1 { |
| 644 |
groups = "usb1"; |
| 645 |
function = "usb1"; |
| 646 |
}; |
| 647 |
|
| 648 |
usb2_pins: usb2 { |
| 649 |
groups = "usb2"; |
| 650 |
function = "usb2"; |
| 651 |
}; |
| 652 |
|
| 653 |
vin0_pins: vin0 { |
| 654 |
groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk"; |
| 655 |
function = "vin0"; |
| 656 |
}; |
| 657 |
|
| 658 |
vin1_pins: vin1 { |
| 659 |
groups = "vin1_data8", "vin1_clk"; |
| 660 |
function = "vin1"; |
| 661 |
}; |
| 662 |
|
| 663 |
sound_pins: sound { |
| 664 |
groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; |
| 665 |
function = "ssi"; |
| 666 |
}; |
| 667 |
|
| 668 |
sound_clk_pins: sound_clk { |
| 669 |
groups = "audio_clk_a"; |
| 670 |
function = "audio_clk"; |
| 671 |
}; |
| 672 |
|
| 673 |
keyboard_pins: keyboard { |
| 674 |
pins = "GP_1_14", "GP_1_24", "GP_1_26", "GP_1_28"; |
| 675 |
bias-pull-up; |
| 676 |
}; |
| 677 |
}; |
| 678 |
|
| 679 |
ðer { |
| 680 |
pinctrl-0 = <ðer_pins>, <&phy1_pins>; |
| 681 |
pinctrl-names = "default"; |
| 682 |
|
| 683 |
phy-handle = <&phy1>; |
| 684 |
renesas,ether-link-active-low; |
| 685 |
status = "okay"; |
| 686 |
|
| 687 |
phy1: ethernet-phy@1 { |
| 688 |
compatible = "ethernet-phy-id0022.1537", |
| 689 |
"ethernet-phy-ieee802.3-c22"; |
| 690 |
reg = <1>; |
| 691 |
interrupts-extended = <&irqc0 0 IRQ_TYPE_LEVEL_LOW>; |
| 692 |
micrel,led-mode = <1>; |
| 693 |
reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>; |
| 694 |
}; |
| 695 |
}; |
| 696 |
|
| 697 |
&cmt0 { |
| 698 |
status = "okay"; |
| 699 |
}; |
| 700 |
|
| 701 |
&mmcif1 { |
| 702 |
pinctrl-0 = <&mmc1_pins>; |
| 703 |
pinctrl-names = "default"; |
| 704 |
|
| 705 |
vmmc-supply = <&fixedregulator3v3>; |
| 706 |
bus-width = <8>; |
| 707 |
non-removable; |
| 708 |
status = "okay"; |
| 709 |
}; |
| 710 |
|
| 711 |
&sata1 { |
| 712 |
status = "okay"; |
| 713 |
}; |
| 714 |
|
| 715 |
&qspi { |
| 716 |
pinctrl-0 = <&qspi_pins>; |
| 717 |
pinctrl-names = "default"; |
| 718 |
|
| 719 |
status = "okay"; |
| 720 |
|
| 721 |
flash: flash@0 { |
| 722 |
compatible = "spansion,s25fl512s", "jedec,spi-nor"; |
| 723 |
reg = <0>; |
| 724 |
spi-max-frequency = <30000000>; |
| 725 |
spi-tx-bus-width = <4>; |
| 726 |
spi-rx-bus-width = <4>; |
| 727 |
spi-cpha; |
| 728 |
spi-cpol; |
| 729 |
m25p,fast-read; |
| 730 |
|
| 731 |
partitions { |
| 732 |
compatible = "fixed-partitions"; |
| 733 |
#address-cells = <1>; |
| 734 |
#size-cells = <1>; |
| 735 |
|
| 736 |
partition@0 { |
| 737 |
label = "loader"; |
| 738 |
reg = <0x00000000 0x00040000>; |
| 739 |
read-only; |
| 740 |
}; |
| 741 |
partition@40000 { |
| 742 |
label = "user"; |
| 743 |
reg = <0x00040000 0x00400000>; |
| 744 |
read-only; |
| 745 |
}; |
| 746 |
partition@440000 { |
| 747 |
label = "flash"; |
| 748 |
reg = <0x00440000 0x03bc0000>; |
| 749 |
}; |
| 750 |
}; |
| 751 |
}; |
| 752 |
}; |
| 753 |
|
| 754 |
&scif0 { |
| 755 |
pinctrl-0 = <&scif0_pins>; |
| 756 |
pinctrl-names = "default"; |
| 757 |
bootph-all; |
| 758 |
|
| 759 |
status = "okay"; |
| 760 |
}; |
| 761 |
|
| 762 |
&scifa1 { |
| 763 |
pinctrl-0 = <&scifa1_pins>; |
| 764 |
pinctrl-names = "default"; |
| 765 |
|
| 766 |
status = "okay"; |
| 767 |
}; |
| 768 |
|
| 769 |
&scif_clk { |
| 770 |
clock-frequency = <14745600>; |
| 771 |
}; |
| 772 |
|
| 773 |
&msiof1 { |
| 774 |
pinctrl-0 = <&msiof1_pins>; |
| 775 |
pinctrl-names = "default"; |
| 776 |
|
| 777 |
status = "okay"; |
| 778 |
|
| 779 |
pmic: pmic@0 { |
| 780 |
compatible = "renesas,r2a11302ft"; |
| 781 |
reg = <0>; |
| 782 |
spi-max-frequency = <6000000>; |
| 783 |
spi-cpol; |
| 784 |
spi-cpha; |
| 785 |
}; |
| 786 |
}; |
| 787 |
|
| 788 |
&sdhi0 { |
| 789 |
pinctrl-0 = <&sdhi0_pins>; |
| 790 |
pinctrl-1 = <&sdhi0_pins_uhs>; |
| 791 |
pinctrl-names = "default", "state_uhs"; |
| 792 |
|
| 793 |
vmmc-supply = <&vcc_sdhi0>; |
| 794 |
vqmmc-supply = <&vccq_sdhi0>; |
| 795 |
cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; |
| 796 |
sd-uhs-sdr50; |
| 797 |
sd-uhs-sdr104; |
| 798 |
status = "okay"; |
| 799 |
}; |
| 800 |
|
| 801 |
&sdhi2 { |
| 802 |
pinctrl-0 = <&sdhi2_pins>; |
| 803 |
pinctrl-1 = <&sdhi2_pins_uhs>; |
| 804 |
pinctrl-names = "default", "state_uhs"; |
| 805 |
|
| 806 |
vmmc-supply = <&vcc_sdhi2>; |
| 807 |
vqmmc-supply = <&vccq_sdhi2>; |
| 808 |
cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; |
| 809 |
sd-uhs-sdr50; |
| 810 |
status = "okay"; |
| 811 |
}; |
| 812 |
|
| 813 |
&cpu0 { |
| 814 |
cpu0-supply = <&vdd_dvfs>; |
| 815 |
}; |
| 816 |
|
| 817 |
&i2c0 { |
| 818 |
pinctrl-0 = <&i2c0_pins>; |
| 819 |
pinctrl-names = "i2c-exio0"; |
| 820 |
}; |
| 821 |
|
| 822 |
&iic0 { |
| 823 |
pinctrl-0 = <&iic0_pins>; |
| 824 |
pinctrl-names = "i2c-exio0"; |
| 825 |
}; |
| 826 |
|
| 827 |
&i2c1 { |
| 828 |
pinctrl-0 = <&i2c1_pins>; |
| 829 |
pinctrl-names = "i2c-exio1"; |
| 830 |
}; |
| 831 |
|
| 832 |
&iic1 { |
| 833 |
pinctrl-0 = <&iic1_pins>; |
| 834 |
pinctrl-names = "i2c-exio1"; |
| 835 |
}; |
| 836 |
|
| 837 |
&i2c2 { |
| 838 |
pinctrl-0 = <&i2c2_pins>; |
| 839 |
pinctrl-names = "i2c-hdmi"; |
| 840 |
|
| 841 |
clock-frequency = <100000>; |
| 842 |
}; |
| 843 |
|
| 844 |
&iic2 { |
| 845 |
pinctrl-0 = <&iic2_pins>; |
| 846 |
pinctrl-names = "i2c-hdmi"; |
| 847 |
|
| 848 |
clock-frequency = <100000>; |
| 849 |
}; |
| 850 |
|
| 851 |
&i2c3 { |
| 852 |
pinctrl-0 = <&i2c3_pins>; |
| 853 |
pinctrl-names = "i2c-pwr"; |
| 854 |
}; |
| 855 |
|
| 856 |
&iic3 { |
| 857 |
pinctrl-0 = <&iic3_pins>; |
| 858 |
pinctrl-names = "i2c-pwr"; |
| 859 |
}; |
| 860 |
|
| 861 |
&pci0 { |
| 862 |
status = "okay"; |
| 863 |
pinctrl-0 = <&usb0_pins>; |
| 864 |
pinctrl-names = "default"; |
| 865 |
}; |
| 866 |
|
| 867 |
&pci1 { |
| 868 |
status = "okay"; |
| 869 |
pinctrl-0 = <&usb1_pins>; |
| 870 |
pinctrl-names = "default"; |
| 871 |
}; |
| 872 |
|
| 873 |
&xhci { |
| 874 |
status = "okay"; |
| 875 |
pinctrl-0 = <&usb2_pins>; |
| 876 |
pinctrl-names = "default"; |
| 877 |
}; |
| 878 |
|
| 879 |
&pci2 { |
| 880 |
status = "okay"; |
| 881 |
pinctrl-0 = <&usb2_pins>; |
| 882 |
pinctrl-names = "default"; |
| 883 |
}; |
| 884 |
|
| 885 |
&hsusb { |
| 886 |
status = "okay"; |
| 887 |
pinctrl-0 = <&hsusb_pins>; |
| 888 |
pinctrl-names = "default"; |
| 889 |
renesas,enable-gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>; |
| 890 |
}; |
| 891 |
|
| 892 |
&usbphy { |
| 893 |
status = "okay"; |
| 894 |
}; |
| 895 |
|
| 896 |
/* HDMI video input */ |
| 897 |
&vin0 { |
| 898 |
pinctrl-0 = <&vin0_pins>; |
| 899 |
pinctrl-names = "default"; |
| 900 |
|
| 901 |
status = "okay"; |
| 902 |
|
| 903 |
port { |
| 904 |
vin0ep2: endpoint { |
| 905 |
remote-endpoint = <&adv7612_out>; |
| 906 |
bus-width = <24>; |
| 907 |
hsync-active = <0>; |
| 908 |
vsync-active = <0>; |
| 909 |
pclk-sample = <1>; |
| 910 |
data-active = <1>; |
| 911 |
}; |
| 912 |
}; |
| 913 |
}; |
| 914 |
|
| 915 |
/* composite video input */ |
| 916 |
&vin1 { |
| 917 |
pinctrl-0 = <&vin1_pins>; |
| 918 |
pinctrl-names = "default"; |
| 919 |
|
| 920 |
status = "okay"; |
| 921 |
|
| 922 |
port { |
| 923 |
vin1ep0: endpoint { |
| 924 |
remote-endpoint = <&adv7180>; |
| 925 |
bus-width = <8>; |
| 926 |
}; |
| 927 |
}; |
| 928 |
}; |
| 929 |
|
| 930 |
&rcar_sound { |
| 931 |
pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; |
| 932 |
pinctrl-names = "default"; |
| 933 |
|
| 934 |
/* Single DAI */ |
| 935 |
#sound-dai-cells = <0>; |
| 936 |
|
| 937 |
status = "okay"; |
| 938 |
|
| 939 |
rcar_sound,dai { |
| 940 |
dai0 { |
| 941 |
playback = <&ssi0>, <&src2>, <&dvc0>; |
| 942 |
capture = <&ssi1>, <&src3>, <&dvc1>; |
| 943 |
}; |
| 944 |
}; |
| 945 |
}; |
| 946 |
|
| 947 |
&rwdt { |
| 948 |
timeout-sec = <60>; |
| 949 |
status = "okay"; |
| 950 |
}; |
| 951 |
|
| 952 |
&ssi1 { |
| 953 |
shared-pin; |
| 954 |
}; |