| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Device Tree Source for the iWave RZ/G1H Qseven SOM |
| 4 |
* |
| 5 |
* Copyright (C) 2020 Renesas Electronics Corp. |
| 6 |
*/ |
| 7 |
|
| 8 |
#include "r8a7742.dtsi" |
| 9 |
#include <dt-bindings/gpio/gpio.h> |
| 10 |
|
| 11 |
/ { |
| 12 |
compatible = "iwave,g21m", "renesas,r8a7742"; |
| 13 |
|
| 14 |
memory@40000000 { |
| 15 |
device_type = "memory"; |
| 16 |
reg = <0 0x40000000 0 0x40000000>; |
| 17 |
}; |
| 18 |
|
| 19 |
memory@200000000 { |
| 20 |
device_type = "memory"; |
| 21 |
reg = <2 0x00000000 0 0x40000000>; |
| 22 |
}; |
| 23 |
|
| 24 |
reg_3p3v: 3p3v { |
| 25 |
compatible = "regulator-fixed"; |
| 26 |
regulator-name = "3P3V"; |
| 27 |
regulator-min-microvolt = <3300000>; |
| 28 |
regulator-max-microvolt = <3300000>; |
| 29 |
regulator-always-on; |
| 30 |
regulator-boot-on; |
| 31 |
}; |
| 32 |
}; |
| 33 |
|
| 34 |
&extal_clk { |
| 35 |
clock-frequency = <20000000>; |
| 36 |
}; |
| 37 |
|
| 38 |
&gpio0 { |
| 39 |
/* GP0_18 set low to select QSPI. Doing so will disable VIN2 */ |
| 40 |
qspi-en-hog { |
| 41 |
gpio-hog; |
| 42 |
gpios = <18 GPIO_ACTIVE_HIGH>; |
| 43 |
output-low; |
| 44 |
line-name = "QSPI_EN"; |
| 45 |
}; |
| 46 |
}; |
| 47 |
|
| 48 |
&i2c0 { |
| 49 |
pinctrl-0 = <&i2c0_pins>; |
| 50 |
pinctrl-names = "default"; |
| 51 |
|
| 52 |
status = "okay"; |
| 53 |
clock-frequency = <400000>; |
| 54 |
|
| 55 |
rtc@68 { |
| 56 |
compatible = "ti,bq32000"; |
| 57 |
reg = <0x68>; |
| 58 |
interrupts-extended = <&gpio1 1 IRQ_TYPE_EDGE_FALLING>; |
| 59 |
}; |
| 60 |
}; |
| 61 |
|
| 62 |
&mmcif1 { |
| 63 |
pinctrl-0 = <&mmc1_pins>; |
| 64 |
pinctrl-names = "default"; |
| 65 |
|
| 66 |
vmmc-supply = <®_3p3v>; |
| 67 |
bus-width = <4>; |
| 68 |
non-removable; |
| 69 |
status = "okay"; |
| 70 |
}; |
| 71 |
|
| 72 |
&pfc { |
| 73 |
i2c0_pins: i2c0 { |
| 74 |
groups = "i2c0"; |
| 75 |
function = "i2c0"; |
| 76 |
}; |
| 77 |
|
| 78 |
mmc1_pins: mmc1 { |
| 79 |
groups = "mmc1_data4", "mmc1_ctrl"; |
| 80 |
function = "mmc1"; |
| 81 |
}; |
| 82 |
|
| 83 |
qspi_pins: qspi { |
| 84 |
groups = "qspi_ctrl", "qspi_data2"; |
| 85 |
function = "qspi"; |
| 86 |
}; |
| 87 |
}; |
| 88 |
|
| 89 |
&qspi { |
| 90 |
pinctrl-0 = <&qspi_pins>; |
| 91 |
pinctrl-names = "default"; |
| 92 |
|
| 93 |
status = "okay"; |
| 94 |
|
| 95 |
flash: flash@0 { |
| 96 |
compatible = "sst,sst25vf016b", "jedec,spi-nor"; |
| 97 |
reg = <0>; |
| 98 |
spi-max-frequency = <50000000>; |
| 99 |
m25p,fast-read; |
| 100 |
spi-cpol; |
| 101 |
spi-cpha; |
| 102 |
|
| 103 |
partitions { |
| 104 |
compatible = "fixed-partitions"; |
| 105 |
#address-cells = <1>; |
| 106 |
#size-cells = <1>; |
| 107 |
|
| 108 |
partition@0 { |
| 109 |
label = "bootloader"; |
| 110 |
reg = <0x00000000 0x000c0000>; |
| 111 |
read-only; |
| 112 |
}; |
| 113 |
partition@c0000 { |
| 114 |
label = "env"; |
| 115 |
reg = <0x000c0000 0x00002000>; |
| 116 |
}; |
| 117 |
partition@c2000 { |
| 118 |
label = "user"; |
| 119 |
reg = <0x000c2000 0x0013e000>; |
| 120 |
}; |
| 121 |
}; |
| 122 |
}; |
| 123 |
}; |